David Galloway [Tue, 8 Dec 2020 15:35:28 +0000 (10:35 -0500)]
container-host: Ignore service restart error on new kernel
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Mon, 7 Dec 2020 18:00:03 +0000 (13:00 -0500)]
Merge pull request #598 from ceph/wip-tab
container-host: Fix service restart syntax
David Galloway [Mon, 7 Dec 2020 17:59:34 +0000 (12:59 -0500)]
container-host: Fix service restart syntax
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Mon, 7 Dec 2020 17:27:25 +0000 (12:27 -0500)]
Merge pull request #597 from guits/guits-restart-docker
container-host: restart docker service
Guillaume Abrioux [Mon, 7 Dec 2020 17:05:17 +0000 (18:05 +0100)]
container-host: restart docker service
Once the mirror has been added in `/etc/docker/daemon.json`
we need to restart the daemon.
This is not very elegant but it's a workaround for now.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
David Galloway [Mon, 7 Dec 2020 16:35:03 +0000 (11:35 -0500)]
Merge pull request #596 from guits/guits-quick_enhancement
container-host: quick improvement in container_mirror code
Guillaume Abrioux [Mon, 7 Dec 2020 13:57:50 +0000 (14:57 +0100)]
container-host: quick improvement in container_mirror code
Let's get rid of these consecutives `set_fact`.
We can inject `PATH` variable on the task calling `registries-conf-ctl`
instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
David Galloway [Thu, 3 Dec 2020 20:59:21 +0000 (15:59 -0500)]
Merge pull request #595 from ceph/wip-containers
Move container tasks to separate role
David Galloway [Wed, 2 Dec 2020 22:46:25 +0000 (17:46 -0500)]
Move container tasks to separate role
I would've liked to keep all this in common but there's a chicken and egg situation.
docker and/or podman get installed during the testnode role. The testnode role can only be run after the common role. The testnode role is also where some repos are added.
So we need to install docker/podman and configure it after the testnodes role runs. Since we also want to be able to configure docker/podman on other systems, I couldn't put these tasks in the testnode role.
Signed-off-by: David Galloway <dgallowa@redhat.com>
adam kraitman [Wed, 2 Dec 2020 16:38:52 +0000 (18:38 +0200)]
Merge pull request #594 from ceph/wip-reload
testnode: Restart cachefilesd in new kernel
David Galloway [Wed, 2 Dec 2020 16:16:05 +0000 (11:16 -0500)]
testnode: Restart cachefilesd in new kernel
Signed-off-by: David Galloway <dgallowa@redhat.com>
adam kraitman [Tue, 1 Dec 2020 20:37:52 +0000 (22:37 +0200)]
Merge pull request #593 from ceph/wip-fscache
testnode: Install and configure cachefilesd
adam kraitman [Tue, 1 Dec 2020 20:36:34 +0000 (22:36 +0200)]
Merge pull request #592 from ceph/wip-fs
testnode: Basic filesystem and mountpoint support
David Galloway [Tue, 1 Dec 2020 20:28:30 +0000 (15:28 -0500)]
testnode: Install and configure cachefilesd
Fixes: https://tracker.ceph.com/issues/6373
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Tue, 1 Dec 2020 18:23:10 +0000 (13:23 -0500)]
testnode: Basic filesystem and mountpoint support
Fixes: https://tracker.ceph.com/issues/6373
This will really only be useful is `drives_to_partition` or `logical_volumes` gets overridden in ansible.cephlab overrides in teuthology yaml. e.g.,
```
overrides:
ansible.cephlab:
vars:
drives_to_partition:
nvme0n1:
device: "/dev/nvme0n1"
unit: "GB"
sizes:
- "0 80"
- "80 160"
- "160 240"
- "240 320"
- "320 340"
- "340 400"
scratch_devs:
- p1
- p2
- p3
- p4
filesystems:
nvme0n1p6:
device: "/dev/nvme0n1p6"
fstype: xfs
mountpoint: "/var/cache/fscache"
```
Signed-off-by: David Galloway <dgallowa@redhat.com>
adam kraitman [Wed, 25 Nov 2020 16:00:33 +0000 (18:00 +0200)]
Merge pull request #590 from ceph/wip-smart-bruuni
smart.sh enhancements for totally failed drives
David Galloway [Wed, 25 Nov 2020 15:23:00 +0000 (10:23 -0500)]
common: smart.sh - print serial numbers of bad drives
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Wed, 25 Nov 2020 15:02:58 +0000 (10:02 -0500)]
common: smart.sh - sort failure messages
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Wed, 25 Nov 2020 14:56:58 +0000 (09:56 -0500)]
common: Support smart.sh report failed drive
The SSDs in the bruuni, specifically, have mostly catastrophically failed. There are no details about sectors in the SMART output. Just obvious failure. `smart.sh` wasn't capable of detecting that.
Signed-off-by: David Galloway <dgallowa@redhat.com>
Dan Mick [Fri, 20 Nov 2020 02:31:06 +0000 (18:31 -0800)]
Merge pull request #589 from ceph/wip-trust-dockermirror
common: Support for container mirror CA certs
David Galloway [Thu, 19 Nov 2020 01:57:35 +0000 (20:57 -0500)]
common: Support for container mirror CA certs
Signed-off-by: David Galloway <dgallowa@redhat.com>
adam kraitman [Sun, 15 Nov 2020 12:33:09 +0000 (14:33 +0200)]
Merge pull request #588 from ceph/wip-chrony-step
Modify playbook to function with chrony
David Galloway [Fri, 13 Nov 2020 17:04:42 +0000 (12:04 -0500)]
Modify playbook to function with chrony
Signed-off-by: David Galloway <dgallowa@redhat.com>
adam kraitman [Tue, 10 Nov 2020 21:25:48 +0000 (23:25 +0200)]
Merge pull request #587 from ceph/wip-rhel83
Add RHEL8.3
David Galloway [Tue, 27 Oct 2020 19:44:22 +0000 (15:44 -0400)]
Add RHEL8.3
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Mon, 26 Oct 2020 13:46:50 +0000 (09:46 -0400)]
Merge pull request #586 from ceph/wip-rhel79-centos82-cobbler
Adding RHEL7.9 and Centos8.2 to Sepia & Octo
Adam Kraitman [Sun, 25 Oct 2020 18:20:47 +0000 (20:20 +0200)]
Adding RHEL7.9 and Centos8.2 to Sepia & Octo
Signed-off-by: Adam Kraitman <akraitma@redhat.com>
David Galloway [Tue, 20 Oct 2020 16:36:13 +0000 (12:36 -0400)]
Merge pull request #585 from ceph/wip-lvm2
testnode: Install lvm2 on RHEL8 machines
David Galloway [Tue, 20 Oct 2020 15:48:38 +0000 (11:48 -0400)]
testnode: Install lvm2 on RHEL8 machines
The PSI nodes downstream don't have lvm2 pre-installed like the baremetal ISO image.
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Wed, 7 Oct 2020 20:02:23 +0000 (16:02 -0400)]
Merge pull request #584 from ceph/wip-centos7-aarch64
Adding Centos-7.8-aarch64 to cobbler
Adam Kraitman [Tue, 29 Sep 2020 14:25:34 +0000 (17:25 +0300)]
Adding Centos-7.8-aarch64 to cobbler
Signed-off-by: Adam Kraitman <akraitma@redhat.com>
David Galloway [Tue, 25 Aug 2020 20:38:08 +0000 (16:38 -0400)]
Merge pull request #583 from dmick/master
teuthology nginx: add gzip_ variables to allow compressed responses
Dan Mick [Tue, 25 Aug 2020 20:31:43 +0000 (20:31 +0000)]
teuthology nginx: add gzip_ variables to allow compressed responses
in particular, gzip_static on allows the server to return file.gz
(if compression is allowable) for files that are requested as "file".
This handles the teuthology.log.gz files that are still referred to as
teuthology.log from pulpito pages.
Signed-off-by: Dan Mick <dmick@redhat.com>
David Galloway [Fri, 14 Aug 2020 15:59:47 +0000 (11:59 -0400)]
Merge pull request #582 from kshtsk/wip-libvirt-zap
testnode: don't zap 'sr' devices
Kyr Shatskyy [Fri, 14 Aug 2020 13:27:53 +0000 (15:27 +0200)]
testnode: don't zap 'sr' devices
We don't need zapping of libvirt dvd devices
Signed-off-by: Kyr Shatskyy <kyrylo.shatskyy@suse.com>
David Galloway [Fri, 17 Jul 2020 17:00:23 +0000 (13:00 -0400)]
Merge pull request #581 from ceph/wip-option-hostname
dhcp-server: Support for `option host-name` declaration
David Galloway [Fri, 17 Jul 2020 16:57:37 +0000 (12:57 -0400)]
dhcp-server: Support for `option host-name` declaration
Signed-off-by: David Galloway <dgallowa@redhat.com>
adam kraitman [Thu, 16 Jul 2020 12:26:40 +0000 (15:26 +0300)]
Merge pull request #580 from ceph/wip-cephkernelugh
all: Ignore more warnings about systemd failing to control init scripts
adam kraitman [Thu, 16 Jul 2020 12:25:07 +0000 (15:25 +0300)]
Merge pull request #579 from ceph/wip-no-copr
testnode: Stop using Ken's copr repo
David Galloway [Wed, 15 Jul 2020 15:05:02 +0000 (11:05 -0400)]
all: Ignore more warnings about systemd failing to control init scripts
Follow-up to https://github.com/ceph/ceph-cm-ansible/pull/578
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Mon, 13 Jul 2020 17:40:50 +0000 (13:40 -0400)]
testnode: Stop using Ken's copr repo
Signed-off-by: David Galloway <dgallowa@redhat.com>
adam kraitman [Thu, 18 Jun 2020 07:43:33 +0000 (10:43 +0300)]
Merge pull request #578 from ceph/wip-systemd-init
all: Ignore warnings about systemd failing to control init scripts
David Galloway [Wed, 17 Jun 2020 14:50:46 +0000 (10:50 -0400)]
all: Ignore warnings about systemd failing to control init scripts
Using the systemd ansible module doesn't help either
https://github.com/ansible/ansible/issues/36585
https://github.com/ansible/ansible/issues/22171
Signed-off-by: David Galloway <dgallowa@redhat.com>
adam kraitman [Mon, 15 Jun 2020 12:35:34 +0000 (15:35 +0300)]
Merge pull request #577 from ceph/wip-fix-gen
generate-fog-csv: Only print a line if the MAC is defined
David Galloway [Thu, 11 Jun 2020 19:14:53 +0000 (15:14 -0400)]
generate-fog-csv: Only print a line if the MAC is defined
There's some hosts that are "cobbler_managed" but don't have a MAC and don't need a MAC. Ansible doesn't help us out any here and print WHICH host doesn't have a MAC. Just throws an error.
Also, there's no need to gather facts on localhost so I set that to `false`
Signed-off-by: David Galloway <dgallowa@redhat.com>
Zack Cerza [Tue, 2 Jun 2020 22:07:36 +0000 (16:07 -0600)]
Merge pull request #576 from ceph/wip-abrt
testnode: Configure ABRT
David Galloway [Tue, 2 Jun 2020 18:50:42 +0000 (14:50 -0400)]
testnode: Configure ABRT
Rachana requested this.
Fixes: https://tracker.ceph.com/issues/45824
Signed-off-by: David Galloway <dgallowa@redhat.com>
adam kraitman [Sun, 31 May 2020 12:15:40 +0000 (15:15 +0300)]
Merge pull request #575 from ceph/wip-fw-whoops
dhcp-server: firewalld_cmd.msg has to be defined to be evaluated
David Galloway [Thu, 28 May 2020 16:45:22 +0000 (12:45 -0400)]
dhcp-server: firewalld_cmd.msg has to be defined to be evaluated
Signed-off-by: David Galloway <dgallowa@redhat.com>
adam kraitman [Wed, 27 May 2020 17:28:24 +0000 (20:28 +0300)]
Merge pull request #574 from ceph/wip-nofw-is-fine
dhcp-server: Skip configuring firewalld if not installed
David Galloway [Wed, 27 May 2020 16:08:02 +0000 (12:08 -0400)]
dhcp-server: Skip configuring firewalld if not installed
Signed-off-by: David Galloway <dgallowa@redhat.com>
Zack Cerza [Fri, 15 May 2020 16:29:35 +0000 (10:29 -0600)]
Merge pull request #573 from ceph/wip-rc-time
cobbler: Print the date during rc.local
David Galloway [Fri, 15 May 2020 14:37:55 +0000 (10:37 -0400)]
cobbler: Print the date during rc.local
This would have been particularly useful before https://tracker.ceph.com/issues/45341 got fixed so I could say *definitively* that the NIC bouncing was to blame for job failures but it can't hurt to have it now.
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Thu, 30 Apr 2020 18:18:05 +0000 (14:18 -0400)]
Merge pull request #572 from ceph/wip-fk
common: Retry registering for 2 minutes
David Galloway [Thu, 30 Apr 2020 18:17:31 +0000 (14:17 -0400)]
common: Retry registering for 2 minutes
Satellite, you make me very sad.
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Thu, 30 Apr 2020 18:17:01 +0000 (14:17 -0400)]
Merge pull request #571 from ceph/wip-no-base
testnode: Don't attempt to install base or core
David Galloway [Thu, 30 Apr 2020 18:11:48 +0000 (14:11 -0400)]
testnode: Don't attempt to install base or core
These groups are already taken care of during Cobbler installation. We're hitting https://bugzilla.redhat.com/show_bug.cgi?id=
1782899 in RHEL8 so let's not bother trying to reinstall during ceph-cm-ansible.
Signed-off-by: David Galloway <dgallowa@redhat.com>
adam kraitman [Thu, 30 Apr 2020 15:36:37 +0000 (18:36 +0300)]
Merge pull request #570 from ceph/wip-release-register
Streamline RHSM transactions
David Galloway [Thu, 30 Apr 2020 14:48:11 +0000 (10:48 -0400)]
common: Streamline RHEL repo registration
Same thing here as the last commit. Satellite has slowed down significantly so the first repo would get enabled successfully but the Satellite DB hadn't caught up yet so subsequent repo enablements would throw 500 errors. This enables all the appropriate repos at the same time reducing the number of times we have to interact with Satellite.
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Thu, 30 Apr 2020 14:37:49 +0000 (10:37 -0400)]
common: Set release when registering
Because we're running Satellite in a VM in RHV on Gluster, we get really slow I/O performance. Sadly *well* below the recommended performance: https://access.redhat.com/solutions/
3397771
When attempting to set the release in a task later in this tasklist, Satellite would throw 500 errors because it was busy still trying to let the postgres DB know the system had been registered.
Setting the release during registration will save minutes per registration.
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Wed, 29 Apr 2020 20:58:29 +0000 (16:58 -0400)]
Merge pull request #569 from ceph/wip-retry
common: Retry setting release for 2 minutes
David Galloway [Wed, 29 Apr 2020 20:57:39 +0000 (16:57 -0400)]
common: Retry setting release for 2 minutes
Getting really REALLY sick of workarounds for ~*~Satellite~*~
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Wed, 29 Apr 2020 18:56:41 +0000 (14:56 -0400)]
Merge pull request #568 from ceph/wip-retry
common: Retries does nothing without until
David Galloway [Wed, 29 Apr 2020 18:44:06 +0000 (14:44 -0400)]
common: Retries does nothing without until
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Wed, 29 Apr 2020 17:07:33 +0000 (13:07 -0400)]
Merge pull request #567 from ceph/wip-retry
common: Retry setting rhsm release
David Galloway [Wed, 29 Apr 2020 16:53:14 +0000 (12:53 -0400)]
common: Retry setting rhsm release
Why is this even necessary, Satellite?!
Signed-off-by: David Galloway <dgallowa@redhat.com>
Zack Cerza [Tue, 28 Apr 2020 21:10:57 +0000 (15:10 -0600)]
Merge pull request #566 from ceph/wip-set-release
common: Define release with subscription-manager
David Galloway [Tue, 28 Apr 2020 20:39:16 +0000 (16:39 -0400)]
common: Define release with subscription-manager
See comment
Signed-off-by: David Galloway <dgallowa@redhat.com>
adam kraitman [Sun, 26 Apr 2020 15:51:05 +0000 (18:51 +0300)]
Merge pull request #565 from ceph/wip-c8
testnode: Fix CentOS repo mirrorlists
David Galloway [Sun, 26 Apr 2020 15:48:00 +0000 (11:48 -0400)]
testnode: Fix CentOS repo mirrorlists
I think there used to be individual directories with the ansible_lsb.release in the path but now there only seems to be "8" and "8.1.1911" so we'll just use 8.
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Fri, 24 Apr 2020 18:22:25 +0000 (14:22 -0400)]
Merge pull request #564 from ceph/wip-fix-c8
testnode: Fix pip vars for CentOS/RHEL8
David Galloway [Fri, 24 Apr 2020 18:20:56 +0000 (14:20 -0400)]
testnode: Fix pip vars for CentOS/RHEL8
Apparently ansible is smart enough to figure this out on CentOS/RHEL8 (python3 distros) but not Ubuntu Focal. So when I manually set the vars for a python3 distro and only included Fossa, it broke CentOS8.
Signed-off-by: David Galloway <dgallowa@redhat.com>
Andrew Schoen [Fri, 24 Apr 2020 17:52:34 +0000 (12:52 -0500)]
Merge pull request #563 from ceph/wip-focal
Focal Fossa
David Galloway [Fri, 24 Apr 2020 16:29:05 +0000 (12:29 -0400)]
testnode: Update pip tasks to support pip3
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Fri, 24 Apr 2020 16:26:48 +0000 (12:26 -0400)]
testnode: Shuffle package lists around to support Ubuntu 20.04
It appears Focal doesn't come with python2 anything so the python2 packages are no longer "common" across all Ubuntu distros.
I moved them out of `common_packages` and added them to the appropriate package lists for each distro_majorversion.yml back to Xenial.
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Fri, 24 Apr 2020 16:26:34 +0000 (12:26 -0400)]
testnode: SSH config for Ubuntu 20.04
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Fri, 24 Apr 2020 16:22:40 +0000 (12:22 -0400)]
cobbler: Add Ubuntu 20.04 support
Signed-off-by: David Galloway <dgallowa@redhat.com>
adam kraitman [Thu, 23 Apr 2020 14:10:58 +0000 (17:10 +0300)]
Merge pull request #562 from ceph/wip-nrpeopts
common: Also define new NRPE_OPTS var
David Galloway [Thu, 23 Apr 2020 13:57:12 +0000 (09:57 -0400)]
common: Also define new NRPE_OPTS var
Not sure if this was a change in new NRPE or Ubuntu but let's just set both and cover our bases
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Thu, 16 Apr 2020 13:39:57 +0000 (09:39 -0400)]
Merge pull request #561 from lxbsz/iozone
testnode: install iozone package from sepia lab repo
Xiubo Li [Thu, 16 Apr 2020 09:27:05 +0000 (05:27 -0400)]
testnode: install iozone package from spia lab repo
The iozone package is remove from centos/rhel 8 dues to the license
issue, and this will install the package from the spia lab repo.
Fixes: https://tracker.ceph.com/issues/43600
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Zack Cerza [Tue, 7 Apr 2020 19:36:06 +0000 (13:36 -0600)]
Merge pull request #559 from ceph/wip-additional-repos
testnode: Add support for additional yum repos defined in secrets
adam kraitman [Sun, 5 Apr 2020 10:20:55 +0000 (13:20 +0300)]
Merge pull request #558 from ceph/wip-if-inrange
dhcp-server: Only create host declaration if its IP is in subnet we'r…
Dan Mick [Fri, 3 Apr 2020 17:44:20 +0000 (10:44 -0700)]
Merge pull request #560 from ceph/wip-cobbler-mac
cobbler_systems: Only update systems if mac and ip are defined
David Galloway [Fri, 3 Apr 2020 16:08:51 +0000 (12:08 -0400)]
cobbler_systems: Only update systems if mac and ip are defined
We must have some systems that snuck into cobbler without having a MAC or IP so when this second "update" task runs, it fails
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Thu, 2 Apr 2020 18:16:55 +0000 (14:16 -0400)]
testnode: Add support for additional yum repos defined in secrets
Signed-off-by: David Galloway <dgallowa@redhat.com>
David Galloway [Thu, 2 Apr 2020 15:25:03 +0000 (11:25 -0400)]
dhcp-server: Only create host declaration if its IP is in subnet we're writing
In the Octo lab, we have multiple subnets with the same domain and VLAN. This is problematic because in the `dhcp_subnets` dict, we only anticipate there being one cidr.
This change will let you have multiple "subnets" in `dhcp_subnets` without fiddling with the ansible inventory ipvars or macvars.
Signed-off-by: David Galloway <dgallowa@redhat.com>
adam kraitman [Tue, 31 Mar 2020 11:33:22 +0000 (14:33 +0300)]
Merge pull request #557 from ceph/wip-dnf-cache
prep-fog-capture: Disable dnf-makecache service on EL8
David Galloway [Mon, 30 Mar 2020 19:12:29 +0000 (15:12 -0400)]
prep-fog-capture: Disable dnf-makecache service on EL8
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1814337
Signed-off-by: David Galloway <dgallowa@redhat.com>
adam kraitman [Sun, 29 Mar 2020 10:04:35 +0000 (13:04 +0300)]
Merge pull request #556 from ceph/wip-rhel82
cobbler: Add RHEL8.2
David Galloway [Fri, 27 Mar 2020 20:52:19 +0000 (16:52 -0400)]
cobbler: Add RHEL8.2
Signed-off-by: David Galloway <dgallowa@redhat.com>
adam kraitman [Sun, 22 Mar 2020 15:39:35 +0000 (17:39 +0200)]
Merge pull request #554 from ceph/wip-forwards
nameserver: Support forwarders
David Galloway [Sun, 22 Mar 2020 15:28:02 +0000 (11:28 -0400)]
nameserver: Support forwarders
When setting up this nameserver role in Octo, recursive lookups were failing. I suspect maybe BIND is doing an `NS` lookup when it doesn't know about a domain it is asked about. Red Hat blocks all external DNS queries so I've defined an internal DNS server for the Octo BIND server to forward to. Now external lookups work.
Signed-off-by: David Galloway <dgallowa@redhat.com>
adam kraitman [Sun, 22 Mar 2020 14:58:11 +0000 (16:58 +0200)]
Merge pull request #553 from ceph/wip-secrets
nameserver: Don't require secrets
David Galloway [Sun, 22 Mar 2020 14:39:49 +0000 (10:39 -0400)]
nameserver: Don't require secrets
secrets/nameserver.yml is only required if we're using DDNS
Signed-off-by: David Galloway <dgallowa@redhat.com>
adam kraitman [Sun, 22 Mar 2020 14:19:34 +0000 (16:19 +0200)]
Merge pull request #552 from ceph/wip-ns-updates2
nameserver: Configure selinux only if enabled
David Galloway [Sun, 22 Mar 2020 14:17:05 +0000 (10:17 -0400)]
nameserver: Configure selinux only if enabled
Signed-off-by: David Galloway <dgallowa@redhat.com>
adam kraitman [Sun, 22 Mar 2020 14:13:35 +0000 (16:13 +0200)]
Merge pull request #551 from ceph/wip-ns-updates
nameserver: Support python2 and python3 in named.conf template
David Galloway [Sun, 22 Mar 2020 14:11:45 +0000 (10:11 -0400)]
nameserver: Support python2 and python3 in named.conf template
Signed-off-by: David Galloway <dgallowa@redhat.com>
adam kraitman [Tue, 17 Mar 2020 16:11:24 +0000 (18:11 +0200)]
Merge pull request #550 from ceph/wip-44501
testnode: Set ansible_python_interpreter for OpenSUSE