/tests/generic/050.out
/tests/xfs/033.out
/tests/xfs/071.out
-/tests/xfs/096.out
/tests/xfs/216.out
# cscope files
fi
}
-# The opposite of _require_xfs_mkfs_validation.
-_require_xfs_mkfs_without_validation()
-{
- _xfs_mkfs_validation_check
- if [ "$?" -ne 0 ]; then
- _notrun "Requires older mkfs without strict input checks: the last supported version of xfsprogs is 4.5."
- fi
-}
-
_require_scratch_xfs_shrink()
{
_require_scratch
+++ /dev/null
-#! /bin/bash
-# SPDX-License-Identifier: GPL-2.0
-# Copyright (c) 2000-2004 Silicon Graphics, Inc. All Rights Reserved.
-#
-# FS QA Test No. 096
-#
-# test out mkfs_xfs output on IRIX/Linux and some of its error handling
-# ensure pv#920679 is addressed
-#
-seqfull=$0
-. ./common/preamble
-_begin_fstest mkfs v2log auto quick
-
-# Import common functions.
-. ./common/filter
-. ./common/log
-
-#
-# filter out counts which will vary
-# - extsz, blocks, agsize, agcount, device name, rtextents
-# - log version varies for crc enabled fs
-# - lsunit varies for 512/4k sector devices
-# filter out differences between linux and irix:
-# - sectsz on Linux
-# - mmr, mixed-case on IRIX
-# - lazy-count on IRIX
-# - inode-paths on IRIX
-# - trailing spaces on Linux but not on IRIX
-#
-# Example output:
-# meta-data=DEV isize=256 agcount=N, agsize=N blks
-# data = bsize=4096 blocks=N, imaxpct=25
-# = sunit=65 swidth=65 blks, unwritten=1
-# naming =version 2 bsize=4096
-# log =internal log bsize=4096 blocks=N, version=1
-# = sunit=0 blks
-# realtime =none extsz=65536 blocks=N, rtextents=N
-#
-mkfs_filter()
-{
- tee -a $seqres.full | \
- sed \
- -e 's/extsz=[0-9][0-9]*[ ]*/extsz=N, /' \
- -e 's/blocks=[0-9][0-9]*/blocks=N/' \
- -e 's/imaxpct=[0-9][0-9]*/imaxpct=N/' \
- -e 's/agsize=[0-9][0-9]*/agsize=N/' \
- -e 's/agcount=[0-9][0-9]*/agcount=N/' \
- -e 's/swidth=[0-9][0-9]* blks$/&, unwritten=1/' \
- -e 's/rtextents=[0-9][0-9]*/rtextents=N/' \
- -e 's/meta-data=[^ ]*/meta-data=DEV/' \
- -e 's/ *isize=[0-9]* / isize=N /' \
- -e '/ *= *sectsz=[0-9][0-9]* *attr=[0-9][0-9]*.*$/d' \
- -e '/ *= *mmr=[0-9][0-9]* *$/d' \
- -e 's/ *mixed-case=[YN]//' \
- -e 's/ *ascii-ci=[01]//' \
- -e 's/\(version=\)\([12]\)/\1N/' \
- -e 's/\(sunit=\)\([018] blks\)/\1N blks/' \
- -e 's/sectsz=[0-9][0-9]* *//' \
- -e 's/, lazy-count.*//' \
- -e '/inode-paths/d' \
- -e 's/\(log[ ]*=\).*bsize/\1LOG bsize/' \
- -e 's/\(realtime[ ]*=\).*extsz/\1REALTIME extsz/' \
- -e '/.*crc=/d' \
- -e 's/ *$//' \
- -e 's/ ftype=[01]//' \
- -e '/^log stripe unit.*too large/d' \
- -e '/^log stripe unit adjusted/d' \
- -e '/Discarding/d' \
- | grep -v parent
-}
-
-# real QA test starts here
-
-# Modify as appropriate.
-_supported_fs xfs
-_require_scratch
-_require_v2log
-_require_xfs_mkfs_without_validation
-
-# choose .out file based on internal/external log
-rm -f $seqfull.out
-if [ "$USE_EXTERNAL" = yes ]; then
- ln -s $seq.out.external $seqfull.out
-else
- ln -s $seq.out.internal $seqfull.out
-fi
-
-# maximum log record size
-max_lr_size=`expr 256 \* 1024`
-
-big_su=`expr $max_lr_size + 4096`
-
-#
-# Test out various mkfs param combinations
-#
-cat >$tmp.seq.params <<EOF
-# su too big but must be a multiple of fs block size too
- -l version=2,su=`expr $max_lr_size + 512`
-# test log stripe greater than LR size
- -l version=2,su=$big_su
-# same test but get log stripe from data stripe
- -l version=2 -d su=$big_su,sw=1
-# test out data stripe
- -m crc=0 -l version=1 -d su=$big_su,sw=1
-# test out data stripe the same but using sunit & swidth
- -m crc=0 -l version=1 -d sunit=`expr $big_su / 512`,swidth=`expr $big_su / 512`
-EOF
-
-#
-# call mkfs in a loop for various params
-#
-echo ""
-cat $tmp.seq.params \
-| while read mkfs
-do
- if echo $mkfs | grep -q '^#'; then
- # print out header & ignore comment
- echo $mkfs
- continue
- fi
- echo "--- mkfs=$mkfs ---"
- export MKFS_OPTIONS="$mkfs"
- _scratch_mkfs_xfs 2>&1 | mkfs_filter
- echo ""
- echo ""
-done
-
-# success, all done
-status=0
-exit
+++ /dev/null
-QA output created by 096
-
-# su too big but must be a multiple of fs block size too
---- mkfs=-l version=2,su=262656 ---
-log stripe unit (262656) must be a multiple of the block size (4096)
-
-
-# test log stripe greater than LR size
---- mkfs=-l version=2,su=266240 ---
-meta-data=DEV isize=N agcount=N, agsize=N blks
-data = bsize=4096 blocks=N, imaxpct=N
- = sunit=0 swidth=0 blks, unwritten=1
-naming =version 2 bsize=4096
-log =LOG bsize=4096 blocks=N, version=N
-realtime =REALTIME extsz=N, blocks=N, rtextents=N
-
-
-# same test but get log stripe from data stripe
---- mkfs=-l version=2 -d su=266240,sw=1 ---
-meta-data=DEV isize=N agcount=N, agsize=N blks
-data = bsize=4096 blocks=N, imaxpct=N
- = sunit=65 swidth=65 blks, unwritten=1
-naming =version 2 bsize=4096
-log =LOG bsize=4096 blocks=N, version=N
- = sunit=N blks
-realtime =REALTIME extsz=N, blocks=N, rtextents=N
-
-
-# test out data stripe
---- mkfs=-m crc=0 -l version=1 -d su=266240,sw=1 ---
-meta-data=DEV isize=N agcount=N, agsize=N blks
-data = bsize=4096 blocks=N, imaxpct=N
- = sunit=65 swidth=65 blks, unwritten=1
-naming =version 2 bsize=4096
-log =LOG bsize=4096 blocks=N, version=N
- = sunit=N blks
-realtime =REALTIME extsz=N, blocks=N, rtextents=N
-
-
-# test out data stripe the same but using sunit & swidth
---- mkfs=-m crc=0 -l version=1 -d sunit=520,swidth=520 ---
-meta-data=DEV isize=N agcount=N, agsize=N blks
-data = bsize=4096 blocks=N, imaxpct=N
- = sunit=65 swidth=65 blks, unwritten=1
-naming =version 2 bsize=4096
-log =LOG bsize=4096 blocks=N, version=N
- = sunit=N blks
-realtime =REALTIME extsz=N, blocks=N, rtextents=N
-
-
+++ /dev/null
-QA output created by 096
-
-# su too big but must be a multiple of fs block size too
---- mkfs=-l version=2,su=262656 ---
-log stripe unit (262656) must be a multiple of the block size (4096)
-
-
-# test log stripe greater than LR size
---- mkfs=-l version=2,su=266240 ---
-meta-data=DEV isize=N agcount=N, agsize=N blks
-data = bsize=4096 blocks=N, imaxpct=N
- = sunit=0 swidth=0 blks, unwritten=1
-naming =version 2 bsize=4096
-log =LOG bsize=4096 blocks=N, version=N
- = sunit=N blks
-realtime =REALTIME extsz=N, blocks=N, rtextents=N
-
-
-# same test but get log stripe from data stripe
---- mkfs=-l version=2 -d su=266240,sw=1 ---
-meta-data=DEV isize=N agcount=N, agsize=N blks
-data = bsize=4096 blocks=N, imaxpct=N
- = sunit=65 swidth=65 blks, unwritten=1
-naming =version 2 bsize=4096
-log =LOG bsize=4096 blocks=N, version=N
- = sunit=N blks
-realtime =REALTIME extsz=N, blocks=N, rtextents=N
-
-
-# test out data stripe
---- mkfs=-m crc=0 -l version=1 -d su=266240,sw=1 ---
-meta-data=DEV isize=N agcount=N, agsize=N blks
-data = bsize=4096 blocks=N, imaxpct=N
- = sunit=65 swidth=65 blks, unwritten=1
-naming =version 2 bsize=4096
-log =LOG bsize=4096 blocks=N, version=N
- = sunit=N blks
-realtime =REALTIME extsz=N, blocks=N, rtextents=N
-
-
-# test out data stripe the same but using sunit & swidth
---- mkfs=-m crc=0 -l version=1 -d sunit=520,swidth=520 ---
-meta-data=DEV isize=N agcount=N, agsize=N blks
-data = bsize=4096 blocks=N, imaxpct=N
- = sunit=65 swidth=65 blks, unwritten=1
-naming =version 2 bsize=4096
-log =LOG bsize=4096 blocks=N, version=N
- = sunit=N blks
-realtime =REALTIME extsz=N, blocks=N, rtextents=N
-
-
projects / xfstests-dev.git / commitdiff