Customized the fedora 20 sshd_config

This adds MaxSessions and {{ ansible_managed }}, but also removes
all the commented out / disabled options.  We're only doing this for readability.

Signed-off-by: Andrew Schoen <aschoen@redhat.com>

diff --git a/roles/testnode/templates/ssh/sshd_config_fedora_20 b/roles/testnode/templates/ssh/sshd_config_fedora_20
index 34308216a3f9cbee29e0e5e431309fe55b3e662f..c310debee5915de9a74140100a563e1bc08ad244 100755 (executable)
--- a/roles/testnode/templates/ssh/sshd_config_fedora_20
+++ b/roles/testnode/templates/ssh/sshd_config_fedora_20
@@ -1,141 +1,23 @@
+#      {{ ansible_managed }}
 #      $OpenBSD: sshd_config,v 1.90 2013/05/16 04:09:14 dtucker Exp $
 
 # This is the sshd server system-wide configuration file.  See
 # sshd_config(5) for more information.
 
-# This sshd was compiled with PATH=/usr/local/bin:/usr/bin
-
-# The strategy used for options in the default sshd_config shipped with
-# OpenSSH is to specify options with their default value where
-# possible, but leave them commented.  Uncommented options override the
-# default value.
-
-# If you want to change the port on a SELinux system, you have to tell
-# SELinux about this change.
-# semanage port -a -t ssh_port_t -p tcp #PORTNUMBER
-#
-#Port 22
-#AddressFamily any
-#ListenAddress 0.0.0.0
-#ListenAddress ::
-
-# The default requires explicit activation of protocol 1
-#Protocol 2
-
-# HostKey for protocol version 1
-#HostKey /etc/ssh/ssh_host_key
-# HostKeys for protocol version 2
-#HostKey /etc/ssh/ssh_host_rsa_key
-#HostKey /etc/ssh/ssh_host_dsa_key
-#HostKey /etc/ssh/ssh_host_ecdsa_key
-
-# Lifetime and size of ephemeral version 1 server key
-#KeyRegenerationInterval 1h
-#ServerKeyBits 1024
-
-# Ciphers and keying
-#RekeyLimit default none
-
-# Logging
-# obsoletes QuietMode and FascistLogging
-#SyslogFacility AUTH
 SyslogFacility AUTHPRIV
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2m
-#PermitRootLogin yes
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
 
-#RSAAuthentication yes
-#PubkeyAuthentication yes
-
-# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
-# but this is overridden so installations will only check .ssh/authorized_keys
-AuthorizedKeysFile .ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
-#RhostsRSAAuthentication no
-# similar for protocol version 2
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# RhostsRSAAuthentication and HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-#IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-#PasswordAuthentication yes
-#PermitEmptyPasswords no
 PasswordAuthentication no
 
-# Change to no to disable s/key passwords
-#ChallengeResponseAuthentication yes
 ChallengeResponseAuthentication no
 
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-#KerberosUseKuserok yes
-
 # GSSAPI options
-#GSSAPIAuthentication no
 GSSAPIAuthentication yes
-#GSSAPICleanupCredentials yes
 GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
-#GSSAPIKeyExchange no
 
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-# WARNING: 'UsePAM no' is not supported in Fedora and may cause several
-# problems.
-#UsePAM no
 UsePAM yes
 
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-#X11Forwarding no
 X11Forwarding yes
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PrintMotd yes
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
 UsePrivilegeSeparation sandbox         # Default for new installations.
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#ShowPatchLevel no
-#UseDNS yes
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
 
 # Accept locale-related environment variables
 AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
@@ -146,12 +28,4 @@ AcceptEnv XMODIFIERS
 # override default of no subsystems
 Subsystem sftp /usr/libexec/openssh/sftp-server
 
-# Uncomment this if you want to use .local domain
-#Host *.local
-#      CheckHostIP no
-
-# Example of overriding settings on a per-user basis
-#Match User anoncvs
-#      X11Forwarding no
-#      AllowTcpForwarding no
-#      ForceCommand cvs server
\ No newline at end of file
+MaxSessions 1000