arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode

USB1 QMP PHY is not just a USB3 PHY, but USB3+DP PHY. Change device tree
nodes accordingly.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210331151614.3810197-7-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index edbcdb90614a3e6a04deed2c49225570f21a20eb..c1b7e28df3d95ec93b3b1f38220cef1adc3a5065 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2058,12 +2058,11 @@
                };
 
                usb_1_qmpphy: phy@88e9000 {
-                       compatible = "qcom,sm8250-qmp-usb3-phy";
+                       compatible = "qcom,sm8250-qmp-usb3-dp-phy";
                        reg = <0 0x088e9000 0 0x200>,
-                             <0 0x088e8000 0 0x20>;
-                       reg-names = "reg-base", "dp_com";
+                             <0 0x088e8000 0 0x40>,
+                             <0 0x088ea000 0 0x200>;
                        status = "disabled";
-                       #clock-cells = <1>;
                        #address-cells = <2>;
                        #size-cells = <2>;
                        ranges;
@@ -2077,7 +2076,7 @@
                                 <&gcc GCC_USB3_PHY_PRIM_BCR>;
                        reset-names = "phy", "common";
 
-                       usb_1_ssphy: lanes@88e9200 {
+                       usb_1_ssphy: usb3-phy@88e9200 {
                                reg = <0 0x088e9200 0 0x200>,
                                      <0 0x088e9400 0 0x200>,
                                      <0 0x088e9c00 0 0x400>,
@@ -2089,6 +2088,20 @@
                                clock-names = "pipe0";
                                clock-output-names = "usb3_phy_pipe_clk_src";
                        };
+
+                       dp_phy: dp-phy@88ea200 {
+                               reg = <0 0x088ea200 0 0x200>,
+                                     <0 0x088ea400 0 0x200>,
+                                     <0 0x088eac00 0 0x400>,
+                                     <0 0x088ea600 0 0x200>,
+                                     <0 0x088ea800 0 0x200>,
+                                     <0 0x088eaa00 0 0x100>;
+                               #phy-cells = <0>;
+                               #clock-cells = <1>;
+                               clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+                               clock-names = "pipe0";
+                               clock-output-names = "usb3_phy_pipe_clk_src";
+                       };
                };
 
                usb_2_qmpphy: phy@88eb000 {