done
done
}
+
+# Functions to race fsstress, fs freeze, and xfs metadata scrubbing against
+# each other to shake out bugs in xfs online repair.
+
+# Filter freeze and thaw loop output so that we don't tarnish the golden output
+# if the kernel temporarily won't let us freeze.
+__stress_freeze_filter_output() {
+ grep -E -v '(Device or resource busy|Invalid argument)'
+}
+
+# Filter scrub output so that we don't tarnish the golden output if the fs is
+# too busy to scrub. Note: Tests should _notrun if the scrub type is not
+# supported.
+__stress_scrub_filter_output() {
+ grep -E -v '(Device or resource busy|Invalid argument)'
+}
+
+# Run fs freeze and thaw in a tight loop.
+__stress_scrub_freeze_loop() {
+ local end="$1"
+
+ while [ "$(date +%s)" -lt $end ]; do
+ $XFS_IO_PROG -x -c 'freeze' -c 'thaw' $SCRATCH_MNT 2>&1 | \
+ __stress_freeze_filter_output
+ done
+}
+
+# Run xfs online fsck commands in a tight loop.
+__stress_scrub_loop() {
+ local end="$1"
+
+ while [ "$(date +%s)" -lt $end ]; do
+ $XFS_IO_PROG -x -c 'repair rmapbt 0' -c 'repair rmapbt 1' $SCRATCH_MNT 2>&1 | \
+ __stress_scrub_filter_output
+ done
+}
+
+# Run fsstress while we're testing online fsck.
+__stress_scrub_fsstress_loop() {
+ local end="$1"
+
+ local args=$(_scale_fsstress_args -p 4 -d $SCRATCH_MNT -n 2000 $FSSTRESS_AVOID)
+
+ while [ "$(date +%s)" -lt $end ]; do
+ $FSSTRESS_PROG $args >> $seqres.full
+ done
+}
+
+# Make sure we have everything we need to run stress and scrub
+_require_xfs_stress_scrub() {
+ _require_xfs_io_command "scrub"
+ _require_command "$KILLALL_PROG" killall
+ _require_freeze
+}
+
+# Make sure we have everything we need to run stress and online repair
+_require_xfs_stress_online_repair() {
+ _require_xfs_stress_scrub
+ _require_xfs_io_command "repair"
+ _require_xfs_io_error_injection "force_repair"
+ _require_freeze
+}
+
+# Clean up after the loops in case they didn't do it themselves.
+_scratch_xfs_stress_scrub_cleanup() {
+ $KILLALL_PROG -TERM xfs_io fsstress >> $seqres.full 2>&1
+ $XFS_IO_PROG -x -c 'thaw' $SCRATCH_MNT >> $seqres.full 2>&1
+}
+
+# Start scrub, freeze, and fsstress in background looping processes, and wait
+# for 30*TIME_FACTOR seconds to see if the filesystem goes down. Callers
+# must call _scratch_xfs_stress_scrub_cleanup from their cleanup functions.
+_scratch_xfs_stress_scrub() {
+ local start="$(date +%s)"
+ local end="$((start + (30 * TIME_FACTOR) ))"
+
+ echo "Loop started at $(date --date="@${start}")," \
+ "ending at $(date --date="@${end}")" >> $seqres.full
+
+ __stress_scrub_fsstress_loop $end &
+ __stress_scrub_freeze_loop $end &
+ __stress_scrub_loop $end &
+
+ # Wait until 2 seconds after the loops should have finished, then
+ # clean up after ourselves.
+ while [ "$(date +%s)" -lt $((end + 2)) ]; do
+ sleep 1
+ done
+ _scratch_xfs_stress_scrub_cleanup
+
+ echo "Loop finished at $(date)" >> $seqres.full
+}
+
+# Start online repair, freeze, and fsstress in background looping processes,
+# and wait for 30*TIME_FACTOR seconds to see if the filesystem goes down.
+# Same requirements and arguments as _scratch_xfs_stress_scrub.
+_scratch_xfs_stress_online_repair() {
+ $XFS_IO_PROG -x -c 'inject force_repair' $SCRATCH_MNT
+ _scratch_xfs_stress_scrub "$@"
+}
#
# FS QA Test No. 422
#
-# Race freeze and rmapbt repair for a while to see if we crash or livelock.
+# Race fsstress and rmapbt repair for a while to see if we crash or livelock.
# rmapbt repair requires us to freeze the filesystem to stop all filesystem
# activity, so we can't have userspace wandering in and thawing it.
#
. ./common/preamble
_begin_fstest online_repair dangerous_fsstress_repair freeze
-_register_cleanup "_cleanup" BUS
-
-# First kill and wait the freeze loop so it won't try to freeze fs again
-# Then make sure fs is not frozen
-# Then kill and wait for the rest of the workers
-# Because if fs is frozen a killed writer will never exit
-kill_loops() {
- local sig=$1
-
- [ -n "$freeze_pid" ] && kill $sig $freeze_pid
- wait $freeze_pid
- unset freeze_pid
- $XFS_IO_PROG -x -c 'thaw' $SCRATCH_MNT
- [ -n "$stress_pid" ] && kill $sig $stress_pid
- [ -n "$repair_pid" ] && kill $sig $repair_pid
- wait
- unset stress_pid
- unset repair_pid
-}
-
-# Override the default cleanup function.
-_cleanup()
-{
- kill_loops -9 > /dev/null 2>&1
+_cleanup() {
+ _scratch_xfs_stress_scrub_cleanup &> /dev/null
cd /
- rm -rf $tmp.*
+ rm -r -f $tmp.*
}
+_register_cleanup "_cleanup" BUS
# Import common functions.
. ./common/filter
# real QA test starts here
_supported_fs xfs
_require_xfs_scratch_rmapbt
-_require_xfs_io_command "scrub"
-_require_xfs_io_error_injection "force_repair"
-_require_command "$KILLALL_PROG" killall
-_require_freeze
+_require_xfs_stress_online_repair
-echo "Format and populate"
_scratch_mkfs > "$seqres.full" 2>&1
_scratch_mount
-
-STRESS_DIR="$SCRATCH_MNT/testdir"
-mkdir -p $STRESS_DIR
-
-for i in $(seq 0 9); do
- mkdir -p $STRESS_DIR/$i
- for j in $(seq 0 9); do
- mkdir -p $STRESS_DIR/$i/$j
- for k in $(seq 0 9); do
- echo x > $STRESS_DIR/$i/$j/$k
- done
- done
-done
-
-cpus=$(( $($here/src/feature -o) * 4 * LOAD_FACTOR))
-
-echo "Concurrent repair"
-filter_output() {
- grep -E -v '(Device or resource busy|Invalid argument)'
-}
-freeze_loop() {
- end="$1"
-
- while [ "$(date +%s)" -lt $end ]; do
- $XFS_IO_PROG -x -c 'freeze' -c 'thaw' $SCRATCH_MNT 2>&1 | filter_output
- done
-}
-repair_loop() {
- end="$1"
-
- while [ "$(date +%s)" -lt $end ]; do
- $XFS_IO_PROG -x -c 'repair rmapbt 0' -c 'repair rmapbt 1' $SCRATCH_MNT 2>&1 | filter_output
- done
-}
-stress_loop() {
- end="$1"
-
- FSSTRESS_ARGS=$(_scale_fsstress_args -p 4 -d $SCRATCH_MNT -n 2000 $FSSTRESS_AVOID)
- while [ "$(date +%s)" -lt $end ]; do
- $FSSTRESS_PROG $FSSTRESS_ARGS >> $seqres.full
- done
-}
-$XFS_IO_PROG -x -c 'inject force_repair' $SCRATCH_MNT
-
-start=$(date +%s)
-end=$((start + (30 * TIME_FACTOR) ))
-
-echo "Loop started at $(date --date="@${start}"), ending at $(date --date="@${end}")" >> $seqres.full
-stress_loop $end &
-stress_pid=$!
-freeze_loop $end &
-freeze_pid=$!
-repair_loop $end &
-repair_pid=$!
-
-# Wait until 2 seconds after the loops should have finished...
-while [ "$(date +%s)" -lt $((end + 2)) ]; do
- sleep 1
-done
-
-# ...and clean up after the loops in case they didn't do it themselves.
-kill_loops >> $seqres.full 2>&1
-
-echo "Loop finished at $(date)" >> $seqres.full
-echo "Test done"
+_scratch_xfs_stress_online_repair
# success, all done
+echo Silence is golden
status=0
exit
projects / xfstests-dev.git / commitdiff