--- /dev/null
+#! /bin/sh
+# FS QA Test No. 194
+#
+# Test mapping around/over holes for sub-page blocks
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2008 Eric Sandeen. All Rights Reserved.
+#-----------------------------------------------------------------------
+#
+# creator
+owner=sandeen@sandeen.net
+
+seq=`basename $0`
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+
+# only xfs supported due to use of xfs_bmap
+_supported_fs xfs
+_supported_os IRIX Linux
+
+# real QA test starts here
+rm -f $seq.full
+
+# For this test we use block size = 1/8 page size
+pgsize=`$here/src/feature -s`
+blksize=`expr $pgsize / 8`
+
+# Filter out file mountpoint and physical location info
+# Input:
+# EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL
+# 0: [0..63]: 160..223 0 (160..223) 64
+# 1: [64..127]: hole 64
+# Output:
+# SCRATCH_MNT/testfile4: TYPE
+# EXT: TYPE TOTAL
+# 0: blocks 1
+# 1: hole 1
+
+_filter_bmap()
+{
+ tee -a $seq.full | \
+ sed "s#$SCRATCH_MNT#SCRATCH_MNT#g" | \
+ awk \
+ '$3 ~ /hole/ { print $1 "\t" $3 "\t" ($4 * 512) / blksize; next }
+ $1 ~ /^[0-9]/ { print $1 "\tblocks\t" ($6 * 512) / blksize; next }
+ $1 ~ /^SCRATCH/ { print $1; next }
+ { print $1 "\tTYPE\t" $6 }' blksize=$blksize
+}
+
+# Filter out offsets, which vary by blocksize
+_filter_od()
+{
+ tee -a $seq.full | \
+ sed -e "s/^[0-9A-Fa-f ]\{7,8\}//"
+}
+
+_require_scratch
+unset MKFS_OPTIONS
+unset XFS_MKFS_OPTIONS
+_scratch_mkfs_xfs -b size=$blksize >/dev/null 2>&1
+_scratch_mount
+
+# 512b block / 4k page example:
+#
+#1) Write 1k of data (buffered):
+#
+# |1111|1111|
+#
+# 2) ftruncate back to 256 bytes:
+#
+# |1100|
+#
+# 3) ftruncate out to 4k: ("H" means hole (expected))
+#
+# |1100|HHHH|HHHH|HHHH|HHHH|HHHH|HHHH|HHHH|
+#
+# So we should have 1 block of data/0, 7 blocks of holes.
+#
+# 4) check what's there with a direct IO read
+#
+# In fact what I get is 1 block of data/0, 1 block of 0's, and 7 blocks of
+# garbage:
+#
+# |1100|0000|GGGG|GGGG|GGGG|GGGG|GGGG|GGGG|
+#
+# The garbage is in fact stale data from the disk.
+#
+# Check that we don't get stale data and that the hole is a hole:
+
+echo "== Test 1 =="
+# Write, truncate in, truncate out
+xfs_io \
+-c "pwrite -S 0x11 -b `expr $pgsize / 2` 0 `expr $pgsize / 2`" \
+-c "truncate `expr $blksize / 2`" \
+-c "truncate $pgsize" \
+-t -f $SCRATCH_MNT/testfile1 >> $seq.full
+
+# directio read of entire file
+xfs_io \
+-c "pread 0 $pgsize" \
+-d $SCRATCH_MNT/testfile1 >> $seq.full
+
+xfs_bmap -v $SCRATCH_MNT/testfile1 | _filter_bmap
+od -x $SCRATCH_MNT/testfile1 | _filter_od
+
+# Similar but write another block to create block/hole/block/hole
+
+echo "== Test 2 =="
+# Write, truncate in, truncate out, write to middle
+xfs_io \
+-c "pwrite -S 0x11 -b `expr $pgsize / 2` 0 `expr $pgsize / 2`" \
+-c "truncate `expr $blksize / 2`" \
+-c "truncate $pgsize" \
+-c "pwrite -S 0x22 -b $blksize `expr $blksize \* 4` $blksize" \
+-t -f $SCRATCH_MNT/testfile2 >> $seq.full
+
+# directio read of entire file
+xfs_io \
+-c "pread 0 $pgsize" \
+-d $SCRATCH_MNT/testfile2 >> $seq.full
+
+xfs_bmap -v $SCRATCH_MNT/testfile2 | _filter_bmap
+od -x $SCRATCH_MNT/testfile2 | _filter_od
+
+# 512 byte block / 4k page example:
+
+# direct write 1 page (8 blocks) of "0x11" to 0x1000
+# map read 1 block, 512 (0x200) at 0
+# truncate to half a block, 256 (0x100)
+# truncate to block+1, 513 (0x201)
+# direct write "0x22" for 1 block at offset 2048 (0x800)
+
+# |1111|1111|1111|1111|1111|1111|1111|1111| Write 1's
+# |MRMR|1111|1111|1111|1111|1111|1111|1111| mapread
+# |11--| truncate down
+# |1100|0---| truncate up, block+1
+# | | |HHHH|HHHH|2222| Write 2's (extending)
+
+# |uptodate?|
+# |1100|0000|1111|1111|2222|----|----|----| <- potential badness
+
+# We're looking for this badness due to mapping over a hole:
+# Exposes stale data from 0x400 (1024) through 0x800 (2048)
+
+# 00000000 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 |................|
+# *
+# 00000100 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
+# *
+# 00000400 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 |................| <- BAD
+# *
+# 00000800 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 |""""""""""""""""|
+# *
+# 00000a00
+
+# We *should* get:
+# |1100|HHHH|HHHH|HHHH|2222|----|----|----|
+
+echo "== Test 3 =="
+xfs_io \
+-c "pwrite -S 0x11 -b $pgsize 0 $pgsize" \
+-c "mmap -r 0 $blksize" -c "mread 0 $blksize" -c "munmap" \
+-c "truncate `expr $blksize / 2`" \
+-c "truncate `expr $blksize + 1`" \
+-c "pwrite -S 0x22 -b $blksize `expr $pgsize / 2` $blksize" \
+-t -d -f $SCRATCH_MNT/testfile3 >> $seq.full
+
+xfs_bmap -v $SCRATCH_MNT/testfile3 | _filter_bmap
+od -x $SCRATCH_MNT/testfile3 | _filter_od
+
+# Now try the same thing but write a sector in the middle of that hole
+# If things go badly stale data will be exposed either side.
+# This is most interesting for block size > 512 (page size > 4096)
+
+# We *should* get:
+# |1100|HHHH|33HH|HHHH|2222|----|----|----|
+
+echo "== Test 4 =="
+xfs_io \
+-c "pwrite -S 0x11 -b $pgsize 0 $pgsize" \
+-c "mmap -r 0 $blksize" -c "mread 0 $blksize" -c "munmap" \
+-c "truncate `expr $blksize / 2`" \
+-c "truncate `expr $blksize + 1`" \
+-c "pwrite -S 0x22 -b $blksize `expr $pgsize / 2` $blksize" \
+-c "pwrite -S 0x33 -b 512 `expr $blksize \* 2` 512" \
+-t -d -f $SCRATCH_MNT/testfile4 >> $seq.full
+
+xfs_bmap -v $SCRATCH_MNT/testfile4 | _filter_bmap
+od -x $SCRATCH_MNT/testfile4 | _filter_od
+
+# success, all done
+status=0
+exit
projects / xfstests-dev.git / commitdiff