_il_wr(il, CSR_UCODE_DRV_GP1_SET, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
 
        if (flags & HW_CARD_DISABLED)
-               set_bit(S_RF_KILL_HW, &il->status);
+               set_bit(S_RFKILL, &il->status);
        else
-               clear_bit(S_RF_KILL_HW, &il->status);
+               clear_bit(S_RFKILL, &il->status);
 
        il_scan_cancel(il);
 
-       if ((test_bit(S_RF_KILL_HW, &status) !=
-            test_bit(S_RF_KILL_HW, &il->status)))
+       if ((test_bit(S_RFKILL, &status) !=
+            test_bit(S_RFKILL, &il->status)))
                wiphy_rfkill_set_hw_state(il->hw->wiphy,
-                                         test_bit(S_RF_KILL_HW, &il->status));
+                                         test_bit(S_RFKILL, &il->status));
        else
                wake_up(&il->wait_command_queue);
 }
        D_INFO("RFKILL status: 0x%x\n", rfkill);
 
        if (rfkill & 0x1) {
-               clear_bit(S_RF_KILL_HW, &il->status);
+               clear_bit(S_RFKILL, &il->status);
                /* if RFKILL is not on, then wait for thermal
                 * sensor in adapter to kick in */
                while (il3945_hw_get_temperature(il) == 0) {
                        D_INFO("Thermal calibration took %dus\n",
                               thermal_spin * 10);
        } else
-               set_bit(S_RF_KILL_HW, &il->status);
+               set_bit(S_RFKILL, &il->status);
 
        /* After the ALIVE response, we can send commands to 3945 uCode */
        set_bit(S_ALIVE, &il->status);
         * clear all bits but the RF Kill bits and return */
        if (!il_is_init(il)) {
                il->status =
-                   test_bit(S_RF_KILL_HW, &il->status) << S_RF_KILL_HW |
+                   test_bit(S_RFKILL, &il->status) << S_RFKILL |
                    test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
                    test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
                goto exit;
        /* ...otherwise clear out all the status bits but the RF Kill
         * bit and continue taking the NIC down. */
        il->status &=
-           test_bit(S_RF_KILL_HW, &il->status) << S_RF_KILL_HW |
+           test_bit(S_RFKILL, &il->status) << S_RFKILL |
            test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
            test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR |
            test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
 
        /* If platform's RF_KILL switch is NOT set to KILL */
        if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
-               clear_bit(S_RF_KILL_HW, &il->status);
+               clear_bit(S_RFKILL, &il->status);
        else {
-               set_bit(S_RF_KILL_HW, &il->status);
+               set_bit(S_RFKILL, &il->status);
                IL_WARN("Radio disabled by HW RF Kill switch\n");
                return -ENODEV;
        }
               il->ucode_data.len);
 
        /* We return success when we resume from suspend and rf_kill is on. */
-       if (test_bit(S_RF_KILL_HW, &il->status))
+       if (test_bit(S_RFKILL, &il->status))
                return 0;
 
        for (i = 0; i < MAX_HW_RESTARTS; i++) {
 {
        struct il_priv *il =
            container_of(data, struct il_priv, _3945.rfkill_poll.work);
-       bool old_rfkill = test_bit(S_RF_KILL_HW, &il->status);
+       bool old_rfkill = test_bit(S_RFKILL, &il->status);
        bool new_rfkill =
            !(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW);
 
        if (new_rfkill != old_rfkill) {
                if (new_rfkill)
-                       set_bit(S_RF_KILL_HW, &il->status);
+                       set_bit(S_RFKILL, &il->status);
                else
-                       clear_bit(S_RF_KILL_HW, &il->status);
+                       clear_bit(S_RFKILL, &il->status);
 
                wiphy_rfkill_set_hw_state(il->hw->wiphy, new_rfkill);
 
 
                il4965_perform_ct_kill_task(il);
 
        if (flags & HW_CARD_DISABLED)
-               set_bit(S_RF_KILL_HW, &il->status);
+               set_bit(S_RFKILL, &il->status);
        else
-               clear_bit(S_RF_KILL_HW, &il->status);
+               clear_bit(S_RFKILL, &il->status);
 
        if (!(flags & RXON_CARD_DISABLED))
                il_scan_cancel(il);
 
-       if ((test_bit(S_RF_KILL_HW, &status) !=
-            test_bit(S_RF_KILL_HW, &il->status)))
+       if ((test_bit(S_RFKILL, &status) !=
+            test_bit(S_RFKILL, &il->status)))
                wiphy_rfkill_set_hw_state(il->hw->wiphy,
-                                         test_bit(S_RF_KILL_HW, &il->status));
+                                         test_bit(S_RFKILL, &il->status));
        else
                wake_up(&il->wait_command_queue);
 }
                 */
                if (!test_bit(S_ALIVE, &il->status)) {
                        if (hw_rf_kill)
-                               set_bit(S_RF_KILL_HW, &il->status);
+                               set_bit(S_RFKILL, &il->status);
                        else
-                               clear_bit(S_RF_KILL_HW, &il->status);
+                               clear_bit(S_RFKILL, &il->status);
                        wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill);
                }
 
         * clear all bits but the RF Kill bit and return */
        if (!il_is_init(il)) {
                il->status =
-                   test_bit(S_RF_KILL_HW, &il->status) << S_RF_KILL_HW |
+                   test_bit(S_RFKILL, &il->status) << S_RFKILL |
                    test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
                    test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
                goto exit;
        /* ...otherwise clear out all the status bits but the RF Kill
         * bit and continue taking the NIC down. */
        il->status &=
-           test_bit(S_RF_KILL_HW, &il->status) << S_RF_KILL_HW |
+           test_bit(S_RFKILL, &il->status) << S_RFKILL |
            test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
            test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR |
            test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
 
        /* If platform's RF_KILL switch is NOT set to KILL */
        if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
-               clear_bit(S_RF_KILL_HW, &il->status);
+               clear_bit(S_RFKILL, &il->status);
        else {
-               set_bit(S_RF_KILL_HW, &il->status);
+               set_bit(S_RFKILL, &il->status);
                wiphy_rfkill_set_hw_state(il->hw->wiphy, true);
 
                il_enable_rfkill_int(il);
 
        /* If platform's RF_KILL switch is NOT set to KILL */
        if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
-               clear_bit(S_RF_KILL_HW, &il->status);
+               clear_bit(S_RFKILL, &il->status);
        else
-               set_bit(S_RF_KILL_HW, &il->status);
+               set_bit(S_RFKILL, &il->status);
 
        wiphy_rfkill_set_hw_state(il->hw->wiphy,
-                                 test_bit(S_RF_KILL_HW, &il->status));
+                                 test_bit(S_RFKILL, &il->status));
 
        il_power_initialize(il);
 
 
                }
        }
 
-       if (test_bit(S_RF_KILL_HW, &il->status)) {
+       if (test_bit(S_RFKILL, &il->status)) {
                IL_ERR("Command %s aborted: RF KILL Switch\n",
                       il_get_cmd_string(cmd->id));
                ret = -ECANCELED;
                hw_rfkill = true;
 
        if (hw_rfkill)
-               set_bit(S_RF_KILL_HW, &il->status);
+               set_bit(S_RFKILL, &il->status);
        else
-               clear_bit(S_RF_KILL_HW, &il->status);
+               clear_bit(S_RFKILL, &il->status);
 
        wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rfkill);
 
 
 #define S_HCMD_ACTIVE  0       /* host command in progress */
 /* 1 is unused (used to be S_HCMD_SYNC_ACTIVE) */
 #define S_INT_ENABLED  2
-#define S_RF_KILL_HW   3
+#define S_RFKILL       3
 #define S_CT_KILL              4
 #define S_INIT         5
 #define S_ALIVE                6
 static inline int
 il_is_rfkill_hw(struct il_priv *il)
 {
-       return test_bit(S_RF_KILL_HW, &il->status);
+       return test_bit(S_RFKILL, &il->status);
 }
 
 static inline int
 
            scnprintf(buf + pos, bufsz - pos, "S_INT_ENABLED:\t %d\n",
                      test_bit(S_INT_ENABLED, &il->status));
        pos +=
-           scnprintf(buf + pos, bufsz - pos, "S_RF_KILL_HW:\t %d\n",
-                     test_bit(S_RF_KILL_HW, &il->status));
+           scnprintf(buf + pos, bufsz - pos, "S_RFKILL:\t %d\n",
+                     test_bit(S_RFKILL, &il->status));
        pos +=
            scnprintf(buf + pos, bufsz - pos, "S_CT_KILL:\t\t %d\n",
                      test_bit(S_CT_KILL, &il->status));