From: Darrick J. Wong <djwong@kernel.org>
Date: Tue, 20 Jan 2026 17:51:35 +0000 (-0800)
Subject: xfs_mdrestore: fix restoration on filesystems with 4k sectors
X-Git-Tag: v6.19.0~27
X-Git-Url: http://git-server-git.apps.pok.os.sepia.ceph.com/?a=commitdiff_plain;h=49157d0df63aa7bca0a2ceafaf14fb72b275dc4d;p=xfsprogs-dev.git

xfs_mdrestore: fix restoration on filesystems with 4k sectors

Running xfs/129 on a disk with 4k LBAs produces the following failure:

 --- /run/fstests/bin/tests/xfs/129.out	2025-07-15 14:41:40.210489431 -0700
 +++ /run/fstests/logs/xfs/129.out.bad	2026-01-05 21:43:08.814485633 -0800
 @@ -2,3 +2,8 @@ QA output created by 129
  Create the original file blocks
  Reflink every other block
  Create metadump file, restore it and check restored fs
 +xfs_mdrestore: Invalid superblock disk address/length
 +mount: /opt: can't read superblock on /dev/loop0.
 +       dmesg(1) may have more information after failed mount system call.
 +mount /dev/loop0 /opt failed
 +(see /run/fstests/logs/xfs/129.full for details)

This is a failure to restore a v2 metadump to /dev/loop0.  Looking at
the metadump itself, the first xfs_meta_extent contains:

{
	.xme_addr = 0,
	.xme_len = 8,
}

Hrm.  This is the primary superblock on the data device, with a length
of 8x512B = 4K.  The original filesystem has this geometry:

# xfs_info /dev/sda4
meta-data=/dev/sda4              isize=512    agcount=4, agsize=2183680 blks
         =                       sectsz=4096  attr=2, projid32bit=1

In other words, a sector size of 4k because the device's LBA size is 4k.
Regrettably, the metadump validation in mdrestore assumes that the
primary superblock is only 512 bytes long, which is not correct for this
scenario.

Fix this by allowing an xme_len value of up to the maximum sector size
for xfs, which is 32k.  Also remove a redundant and confusing mask check
for the xme_addr.

Note that this error was masked (at least on little-endian platforms
that most of us test on) until recent commit 98f05de13e7815 ("mdrestore:
fix restore_v2() superblock length check") which is why I didn't spot it
earlier.

Cc: linux-xfs@vger.kernel.org # v6.6.0
Fixes: fa9f484b79123c ("mdrestore: Define mdrestore ops for v2 format")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---

diff --git a/mdrestore/xfs_mdrestore.c b/mdrestore/xfs_mdrestore.c
index b6e8a619..90908fe0 100644
--- a/mdrestore/xfs_mdrestore.c
+++ b/mdrestore/xfs_mdrestore.c
@@ -437,13 +437,21 @@ restore_v2(
 	if (fread(&xme, sizeof(xme), 1, md_fp) != 1)
 		fatal("error reading from metadump file\n");
 
-	if (xme.xme_addr != 0 || be32_to_cpu(xme.xme_len) != 1 ||
-	    (be64_to_cpu(xme.xme_addr) & XME_ADDR_DEVICE_MASK) !=
-			XME_ADDR_DATA_DEVICE)
-		fatal("Invalid superblock disk address/length\n");
+	/*
+	 * The first block must be the primary super, which is at the start of
+	 * the data device, which is device 0.
+	 */
+	if (xme.xme_addr != 0)
+		fatal("Invalid superblock disk address 0x%llx\n",
+				be64_to_cpu(xme.xme_addr));
 
 	len = BBTOB(be32_to_cpu(xme.xme_len));
 
+	/* The primary superblock is always a single filesystem sector. */
+	if (len < BBTOB(1) || len > XFS_MAX_SECTORSIZE)
+		fatal("Invalid superblock disk length 0x%x\n",
+				be32_to_cpu(xme.xme_len));
+
 	if (fread(block_buffer, len, 1, md_fp) != 1)
 		fatal("error reading from metadump file\n");