From: Sage Weil <sage@redhat.com>
Date: Sat, 7 Mar 2020 15:13:23 +0000 (-0600)
Subject: doc/cephadm: fix formatting, typos
X-Git-Tag: v15.1.1~67^2~2
X-Git-Url: http://git.apps.os.sepia.ceph.com/?a=commitdiff_plain;h=e0161132bcbaa357cdc642e1bbc367ea42546957;p=ceph-ci.git

doc/cephadm: fix formatting, typos

No need for [monitor 1] when accessing the CLI--this can happy from
any node or container that has a working CLI.

Signed-off-by: Sage Weil <sage@redhat.com>
---

diff --git a/doc/cephadm/index.rst b/doc/cephadm/index.rst
index a6e76d3467c..42096ac8df7 100644
--- a/doc/cephadm/index.rst
+++ b/doc/cephadm/index.rst
@@ -55,12 +55,11 @@ your Linux distribution::
 Bootstrap a new cluster
 =======================
 
-To create a new cluster, you need to know:
-
-* Which *IP address* to use for the cluster's first monitor.  This is
-  normally just the IP for the first cluster node.  If there are
-  multiple networks and interfaces, be sure to choose one that will be
-  accessible by any hosts accessing the Ceph cluster.
+To create a new cluster, you need to know which *IP address* to use
+for the cluster's first monitor.  This is normally just the IP for the
+first cluster node.  If there are multiple networks and interfaces, be
+sure to choose one that will be accessible by any hosts accessing the
+Ceph cluster.
 
 To bootstrap the cluster run the following command::
 
@@ -109,19 +108,19 @@ Watching cephadm log messages
 
 Cephadm logs to the ``cephadm`` cluster log channel, which means you can monitor progress in realtime with::
 
-  ceph -W cephadm
+  # ceph -W cephadm
 
 By default it will show info-level events and above.  To see
-debug-level messages too,::
+debug-level messages too::
 
-  ceph config set mgr mgr/cephadm/log_to_cluster_level debug
-  ceph -W cephadm --watch-debug
+  # ceph config set mgr mgr/cephadm/log_to_cluster_level debug
+  # ceph -W cephadm --watch-debug
 
-Be careful: the debug messagse are very verbose!
+Be careful: the debug messages are very verbose!
 
 You can see recent events with::
 
-  ceph log last cephadm
+  # ceph log last cephadm
 
 These events are also logged to the ``ceph.cephadm.log`` file on
 monitor hosts and/or to the monitor-daemon stderr.
@@ -138,7 +137,7 @@ For each new host you'd like to add to the cluster, you need to do two things:
 
 #. Tell Ceph that the new node is part of the cluster::
 
-     [monitor 1] # ceph orch host add *newhost*
+     # ceph orch host add *newhost*
 
 Deploying additional monitors
 =============================
@@ -164,18 +163,18 @@ To add OSDs to the cluster, you have two options:
 1) You need to know the device name for the block device (hard disk or SSD)
 that will be used.  Then,::
 
-  [monitor 1] # ceph orch osd create *<host>*:*<path-to-device>*
+  # ceph orch osd create *<host>*:*<path-to-device>*
 
 For example, to deploy an OSD on host *newhost*'s SSD,::
 
-  [monitor 1] # ceph orch osd create newhost:/dev/disk/by-id/ata-WDC_WDS200T2B0A-00SM50_182294800028
+  # ceph orch osd create newhost:/dev/disk/by-id/ata-WDC_WDS200T2B0A-00SM50_182294800028
 
 
 2) You need to describe your disk setup by it's properties (Drive Groups)
 
 Link to DriveGroup docs.::
 
-  [monitor 1] # ceph orchestrator osd create -i my_drivegroups.yml
+  # ceph orchestrator osd create -i my_drivegroups.yml
 
 
 .. _drivegroups: drivegroups::
@@ -186,7 +185,7 @@ Deploying manager daemons
 It is a good idea to have at least one backup manager daemon.  To
 deploy one or more new manager daemons,::
 
-  [monitor 1] # ceph orch apply mgr *<new-num-mgrs>* [*<host1>* ...]
+  # ceph orch apply mgr *<new-num-mgrs>* [*<host1>* ...]
 
 Deploying MDSs
 ==============