Ali Maredia [Fri, 4 Oct 2019 19:31:25 +0000 (19:31 +0000)]
rgw multisite: enable more than 1 realm per cluster
Make it so that more than one realm, zonegroup,
or zone can be created during a run of the rgw
multisite ansible playbooks.
The rgw hosts now need to be grouped into zones
and realms in the inventory.
.yml files need to be created in group_vars
for the realms and zones. Sample yaml files
are available.
Also remove multsite destroy playbook
and add --cluster before radosgw-admin commands
remove manually added rgw_zone_endpoints var
and have ceph-ansible automatically add the
correct endpoints of all the rgws in a rgw_zone
from the information provided in that rgws hostvars.
Dimitri Savineau [Fri, 28 Feb 2020 16:37:14 +0000 (11:37 -0500)]
shrink-rbdmirror: fix presence after removal
We should add retry/delay to check the presence of the rbdmirror daemon
in the cluster status because the status takes some time to be updated.
Also the metadata.hostname isn't a good key to check because it doesn't
reflect the ansible_hostname fact. We should use metadata.id instead.
Dimitri Savineau [Wed, 26 Feb 2020 16:03:32 +0000 (11:03 -0500)]
tox: update shrink scenario configuration
The shrink scenarios don't need the docker variables (except for OSD).
Removing pytest for shrink-mgr.
Adding environment variables for xxx_to_kill ansible variable.
Dimitri Savineau [Wed, 26 Feb 2020 15:20:05 +0000 (10:20 -0500)]
shrink: don't use localhost node
The ceph-facts are running on localhost so if this node is using a
different OS/release that the ceph node we can have a mismatch between
docker/podman container binary.
This commit also reduces the scope of the ceph-facts role because we only
need the container_binary tasks.
Dimitri Savineau [Fri, 31 Jan 2020 15:42:10 +0000 (10:42 -0500)]
purge: stop rgw instances by iteration
It looks like that the service module doesn't support wildcard anymore
for stopping/disabling multiple services.
fatal: [rgw0]: FAILED! => changed=false
msg: 'This module does not currently support using glob patterns,
found ''*'' in service name: ceph-radosgw@*'
...ignoring
Instead we should iterate over the rgw_instances list.
It doesn't make sense to start validating configuration if the ansible
version isn't the good one.
This commit moves the check_system task as the first task in the
ceph-validate role.
The ansible version test tasks are moved at the top of this file.
Also moving the iscsi kernel tests from check_system to check_iscsi
file.
We need to call ceph-facts only for setting `container_binary`.
Since this task has been isolated we can use `tasks_from` to only execute the
needed task.
Configure ceph dashboard backend and dashboard_frontend_vip
This change introduces a new set of tasks to configure the
ceph dashboard backend and listen just on the mgr related
subnet (and not on '*'). For the same reason the proper
server address is added in both prometheus and alertmanger
systemd units.
This patch also adds the "dashboard_frontend_vip" parameter
to make sure we're able to support the HA model when multiple
grafana instances are deployed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1792230 Signed-off-by: Francesco Pantano <fpantano@redhat.com>
(cherry picked from commit 15ed9eebf15c631b33c9de54f361e3d8ae993b3d)
The ad7a5da commit introduced a regression when using TLS on haproxy
via the haproxy_frontend_ssl_certificate variable.
This cause the "stats socket" and the "tune.ssl.default-dh-param"
parameters to be on the same line resulting haproxy failing to start.
Dimitri Savineau [Mon, 10 Feb 2020 18:43:31 +0000 (13:43 -0500)]
ceph-{mon,osd}: move default crush variables
Since ed36a11 we move the crush rules creation code from the ceph-mon to
the ceph-osd role.
To keep the backward compatibility we kept the possibility to set the
crush variables on the mons side but we didn't move the default values.
As a result, when using crush_rule_config set to true and wanted to use
the default values for crush_rules then the crush rule ansible task
creation will fail.
"msg": "'ansible.vars.hostvars.HostVarsVars object' has no attribute
'crush_rules'"
This patch move the default crush variables from ceph-mon to ceph-osd
role but also use those default values when nothing is defined on the
mons side.
Dimitri Savineau [Wed, 12 Feb 2020 15:38:25 +0000 (10:38 -0500)]
ceph-grafana: fix grafana_{crt,key} condition
The grafana_{crt,key} aren't boolean variables but strings. The default
value is an empty string so we should do the conditional on the string
length instead of the bool filter
John Fulton [Thu, 6 Feb 2020 02:23:54 +0000 (21:23 -0500)]
The _filtered_clients list should intersect with ansible_play_batch
Client configuration with --limit fails without this patch
because certain tasks are only done to the first host in the
_filtered_clients list and it's likely that first host will
not be included in what's sepcified with --limit. To fix this
the _filtered_clients list should be built from all clients
in the inventory that are also in the running play.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1798781 Signed-off-by: John Fulton <fulton@redhat.com>
(cherry picked from commit e4bf4857f556465c60f89d32d5f2a92d25d5c90f)
Since nfs-ganesha 2.8.3 the rados-urls library has been move to a
dedicated package.
We don't have the same nfs-ganesha 2.8.x between the community and rhcs
repositories.
community: 2.8.1
rhcs: 2.8.3
As a workaround we will install that package only for rhcs setup.
Dimitri Savineau [Mon, 10 Feb 2020 16:06:48 +0000 (11:06 -0500)]
ceph-nfs: fix ceph_nfs_ceph_user variable
The ceph_nfs_ceph_user variable is a string for the ceph-nfs role but a
list in ceph-client role. 6a6785b introduced a confusion between both variable type in the ceph-nfs
role for external ceph with ganesha.
When using multiple grafana hosts then we push set the grafana and
prometheus URL and push the dashboard layout to a single node.
grafana_server_addrs is the list of all grafana nodes and used during
the ceph-dashboard role (on mgr/mon nodes).
grafana_server_addr is the current grafana node used during the
ceph-grafana and ceph-prometheus role (on grafana-server nodes).
We don't have the grafana_server_addr fact duplication code between
external vs collocated nodes.
switch_to_containers: increase health check values
This commit increases the default values for the following variable
consumed in switch-from-non-containerized-to-containerized-ceph-daemons.yml
playbook.
This also moves these variables in `ceph-defaults` role so the user can
set different values if needed.
If for some reason, there's an old rgw socket file present in the
/var/run/ceph/ directory then the test command could fail with
test: xxxxxxxxx.asok: binary operator expected
$ ls -hl /var/run/ceph/
total 0
srwxr-xr-x. ceph-client.rgw.rgw0.rgw0.68.94153614631472.asok
srwxr-xr-x. ceph-client.rgw.rgw0.rgw0.68.94240997655088.asok
We can check the radosgw socket in /proc/net/unix to avoid using wildcard
in the socket name.
Dimitri Savineau [Thu, 23 Jan 2020 21:58:14 +0000 (16:58 -0500)]
filestore-to-bluestore: skip bluestore osd nodes
If the OSD node is already using bluestore OSDs then we should skip
all the remaining tasks to avoid purging OSD for nothing.
Instead we warn the user.
Dimitri Savineau [Wed, 29 Jan 2020 03:31:04 +0000 (22:31 -0500)]
ceph-container-engine: lvm2 on OSD nodes only
Since de8f2a9 the lvm2 package installation has been moved from ceph-osd
role to ceph-container-engine role.
But the scope wasn't limited to the OSD nodes only.
This commit fixes this behaviour.
Mike Christie [Tue, 28 Jan 2020 22:31:55 +0000 (16:31 -0600)]
iscsi: Fix crashes during rolling update
During a rolling update we will run the ceph iscsigw tasks that start
the daemons then run the configure_iscsi.yml tasks which can create
iscsi objects like targets, disks, clients, etc. The problem is that
once the daemons are started they will accept confifguration requests,
or may want to update the system themself. Those operations can then
conflict with the configure_iscsi.yml tasks that setup objects and we
can end up in crashes due to the kernel being in a unsupported state.
This could also happen during creation, but is less likely due to no
objects being setup yet, so there are no watchers or users accessing the
gws yet. The fix in this patch works for both update and initial setup.
Dimitri Savineau [Tue, 28 Jan 2020 15:27:34 +0000 (10:27 -0500)]
ceph-defaults: remove rgw from ceph_conf_overrides
The [rgw] section in the ceph.conf file or via the ceph_conf_overrides
variable doesn't exist and has no effect.
To apply overrides to all radosgw instances we should use either the
[global] or [client] sections.
Overrides per radosgw instance should still use the
[client.rgw.{instance-name}] section.
Dimitri Savineau [Wed, 29 Jan 2020 02:34:24 +0000 (21:34 -0500)]
ceph-facts: fix _container_exec_cmd fact value
When using different name between the inventory_hostname and the
ansible_hostname then the _container_exec_cmd fact will get a wrong
value based on the inventory_hostname instead of the ansible_hostname.
This happens when the ceph cluster is already running (update/upgrade).
Later the container exec commands will fail because the container name
is wrong.
We should always set the _container_exec_cmd based on the
ansible_hostname fact.
If the playbook is used on a host running bluestore OSDs then the
osd_fsid_list won't be filled because the bluestore OSDs are reported
with 'type: block' via ceph-volume lvm list command but we are looking
for 'type: data' (filestore).
fix calls to `container_exec_cmd` in ceph-osd role
We must call `container_exec_cmd` from the right monitor node otherwise
the value of the fact might mistmatch between the delegated node and the
node being played.
Dimitri Savineau [Wed, 22 Jan 2020 19:45:38 +0000 (14:45 -0500)]
site-container: don't skip ceph-container-common
On HCI environment the OSD and Client nodes are collocated. Because we
aren't running the ceph-container-common role on the client nodes except
the first one (for keyring purpose) then the ceph-role execution fails
due to undefined variables.
because we are trying to run `ceph-config` on this node, it doesn't make
sense so we should simply run this play on all groups except
`[grafana-server]`.
Dimitri Savineau [Tue, 21 Jan 2020 21:37:10 +0000 (16:37 -0500)]
filestore-to-bluestore: fix osd_auto_discovery
When osd_auto_discovery is set then we need to refresh the
ansible_devices fact between after the filestore OSD purge
otherwise the devices fact won't be populated.
Also remove the gpt header on ceph_disk_osds_devices because
the devices is empty at this point for osd_auto_discovery.
Adding the bool filter when needed.
Dimitri Savineau [Mon, 20 Jan 2020 21:40:58 +0000 (16:40 -0500)]
filestore-to-bluestore: --destroy with raw devices
We still need --destroy when using a raw device otherwise we won't be
able to recreate the lvm stack on that device with bluestore.
Running command: /usr/sbin/vgcreate -s 1G --force --yes ceph-bdc67a84-894a-4687-b43f-bcd76317580a /dev/sdd
stderr: Physical volume '/dev/sdd' is already in volume group 'ceph-b7801d50-e827-4857-95ec-3291ad6f0151'
Unable to add physical volume '/dev/sdd' to volume group 'ceph-b7801d50-e827-4857-95ec-3291ad6f0151'
/dev/sdd: physical volume not initialized.
--> Was unable to complete a new OSD, will rollback changes
Dimitri Savineau [Mon, 20 Jan 2020 16:24:08 +0000 (11:24 -0500)]
ceph-osd: set container objectstore env variables
Because we need to manage legacy ceph-disk based OSD with ceph-volume
then we need a way to know the osd_objectstore in the container.
This was done like this previously with ceph-disk so we should also
do it with ceph-volume.
Note that this won't have any impact for ceph-volume lvm based OSD.
Rename docker_env_args fact to container_env_args and move the container
condition on the include_tasks call.
Remove OSD_DMCRYPT env variable from the ceph-osd template because it's
now included in the container_env_args variable.
Benoît Knecht [Mon, 20 Jan 2020 10:36:27 +0000 (11:36 +0100)]
ceph-rgw: Fix customize pool size "when" condition
In 3c31b19ab39f297635c84edb9e8a5de6c2da7707, I fixed the `customize pool
size` task by replacing `item.size` with `item.value.size`. However, I
missed the same issue in the `when` condition.
handler: fix call to container_exec_cmd in handler_osds
When unsetting the noup flag, we must call container_exec_cmd from the
delegated node (first mon member)
Also, adding a `run_once: true` because this task needs to be run only 1
time.
Since commit [1] running_mon introduced, it can be not defined
which results in fatal error [2]. This patch defines default value which
was used before patch [1]
Iterating over all monitors in order to delegate a `
{{ container_binary }}` fails when collocating mgrs with mons, because
ceph-facts reset `container_exec_cmd` to point to the first member of
the monitor group.
The idea is to force `container_exec_cmd` to be reset in ceph-mgr.
This commit also removes the `container_exec_cmd_mgr` fact.
the new ceph status registered in `ceph_status` will report `fsmap.up` =
0 when it's the last mds given that it's done after we shrink the mds,
it means the condition is wrong. Also adding a condition so we don't try
to delete the fs if a standby node is going to rejoin the cluster.
Before this patch, the lvm2 package installation was done during the
ceph-osd role.
However we were running ceph-volume command in the ceph-config role
before ceph-osd. If lvm2 wasn't installed then the ceph-volume command
fails:
error checking path "/run/lock/lvm": stat /run/lock/lvm: no such file or
directory
This wasn't visible before because lvm2 was automatically installed as
docker dependency but it's not the same for podman on CentOS 8.
Dimitri Savineau [Mon, 13 Jan 2020 15:24:52 +0000 (10:24 -0500)]
ceph-facts: move grafana fact to dedicated file
We don't need to executed the grafana fact everytime but only during
the dashboard deployment.
Especially for ceph-grafana, ceph-prometheus and ceph-dashboard roles.
To avoid confusion, let's change the default value from `0.0.0.0` to
`x.x.x.x`.
Users might think setting `0.0.0.0` will make the daemon binding on all
interfaces.
Dimitri Savineau [Wed, 27 Nov 2019 14:29:06 +0000 (09:29 -0500)]
ceph-osd: wait for all osds once
cf8c6a3 moves the 'wait for all osds' task from openstack_config to the
main tasks list.
But the openstack_config code was executed only on the last OSD node.
We don't need to do this check on all OSD node so we need to add set
run_once to true on that task.
Dimitri Savineau [Tue, 26 Nov 2019 16:09:11 +0000 (11:09 -0500)]
ceph-osd: wait for all osd before crush rules
When creating crush rules with device class parameter we need to be sure
that all OSDs are up and running because the device class list is
is populated with this information.
This is now enable for all scenario not openstack_config only.
Dimitri Savineau [Thu, 31 Oct 2019 20:24:12 +0000 (16:24 -0400)]
ceph-osd: add device class to crush rules
This adds device class support to crush rules when using the class key
in the rule dict via the create-replicated sub command.
If the class key isn't specified then we use the create-simple sub
command for backward compatibility.
Dimitri Savineau [Thu, 31 Oct 2019 20:17:33 +0000 (16:17 -0400)]
move crush rule creation from mon to osd role
If we want to create crush rules with the create-replicated sub command
and device class then we need to have the OSD created before the crush
rules otherwise the device classes won't exist.
Dimitri Savineau [Fri, 10 Jan 2020 14:31:26 +0000 (09:31 -0500)]
purge-iscsi-gateways: don't run all ceph-facts
We only need to have the container_binary fact. Because we're not
gathering the facts from all nodes then the purge fails trying to get
one of the grafana fact.
rolling_update: run registry auth before upgrading
There's some tasks using the new container image during the rolling
upgrade playbook that needs to execute the registry login first otherwise
the nodes won't be able to pull the container image.
Unable to find image 'xxx.io/foo/bar:latest' locally
Trying to pull repository xxx.io/foo/bar ...
/usr/bin/docker-current: Get https://xxx.io/v2/foo/bar/manifests/latest:
unauthorized
config: exclude ceph-disk prepared osds in lvm batch report
We must exclude the devices already used and prepared by ceph-disk when
doing the lvm batch report. Otherwise it fails because ceph-volume
complains about GPT header.
Instead of running the ceph roles against localhost we should do it
on the first mon.
The ansible and inventory hostname of the rgw nodes could be different.
Ensure that the rgw instance to remove is present in the cluster.
Fix rgw service and directory path.
We must pick up a mon which actually exists in ceph-facts in order to
detect if a cluster is running. Otherwise, it will state no cluster is
already running which will end up deploying a new monitor isolated in a
new quorum.
Only the ipv4 addresses from the nodes running the dashboard mgr module
were added to the trusted_ip_list configuration file on the iscsigws
nodes.
This also add the iscsi gateways with ipv6 configuration to the ceph
dashboard.
for instance. However, doing so would create pools of size
`osd_pool_default_size` regardless of the `size` value. This was due to
the fact that the Ansible task used
projects / ceph-ansible.git / log