drm/panthor: Defer scheduler entitiy destruction to queue release
Commit de8548813824 ("drm/panthor: Add the scheduler logical block")
handled destruction of a group's queues' drm scheduler entities early
into the group destruction procedure.
However, that races with the group submit ioctl, because by the time
entities are destroyed (through the group destroy ioctl), the submission
procedure might've already obtained a group handle, and therefore the
ability to push jobs into entities. This is met with a DRM error message
within the drm scheduler core as a situation that should never occur.
Fix by deferring drm scheduler entity destruction to queue release time.
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block") Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20250919164436.531930-1-adrian.larumbe@collabora.com
Remove this flag as the driver stopped managing it individually since
commit a4056c2a6344 ("drm/amd/display: use HW hdr mult for brightness
boost"). After some back and forth it was reintroduced as a condition to
`set_output_transfer_func()` in [1]. Without direct management, this
flag only changes value when all surface update flags are set true on
UPDATE_TYPE_FULL with no output TF status meaning.
Fixes: bb622e0c0044 ("drm/amd/display: program output tf when required") [1] Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 752e6f283ec59ae007aa15a93d5a4b2eefa8cec9)
Leo Li [Fri, 12 Sep 2025 15:01:50 +0000 (11:01 -0400)]
drm/amd/display: Init DCN35 clocks from pre-os HW values
[Why]
We did not initialize dc clocks with boot-time hw values during init.
This lead to incorrect clock values in dc, causing `dcn35_update_clocks`
to make incorrect updates.
[How]
Correctly initialize DC with pre-os clk values from HW.
s/dump/save/ as that accurately reflects the purpose of the functions.
Fixes: 8774029f76b9 ("drm/amd/display: Add DCN35 CLK_MGR") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d43cc4ea1f9d720ab4bf06806f79260bfe981508)
Alvin Lee [Tue, 9 Sep 2025 20:03:08 +0000 (16:03 -0400)]
drm/amd/display: Use mpc.preblend flag to indicate preblend
[Description]
Modifications in per asic capability means mpc.preblend flag should be used
to indicate preblend. Update relevant paths to use this flag.
Fixes: 39923050615c ("drm/amd/display: Clear DPP 3DLUT Cap") Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9e5d4a5e27c6dc4e1b4fc9d654d13de12b8ce156) Cc: stable@vger.kernel.org
Matthew Schwartz [Thu, 11 Sep 2025 17:48:51 +0000 (10:48 -0700)]
drm/amd/display: Only restore backlight after amdgpu_dm_init or dm_resume
On clients that utilize AMD_PRIVATE_COLOR properties for HDR support,
brightness sliders can include a hardware controlled portion and a
gamma-based portion. This is the case on the Steam Deck OLED when using
gamescope with Steam as a client.
When a user sets a brightness level while HDR is active, the gamma-based
portion and/or hardware portion are adjusted to achieve the desired
brightness. However, when a modeset takes place while the gamma-based
portion is in-use, restoring the hardware brightness level overrides the
user's overall brightness level and results in a mismatch between what
the slider reports and the display's current brightness.
To avoid overriding gamma-based brightness, only restore HW backlight
level after boot or resume. This ensures that the backlight level is
set correctly after the DC layer resets it while avoiding interference
with subsequent modesets.
Fixes: 7875afafba84 ("drm/amd/display: Fix brightness level not retained over reboot") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4551 Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a490c8d77d500b5981e739be3d59c60cfe382536) Cc: stable@vger.kernel.org
Commit 1a194e6c8e1e ("fbcon: fix integer overflow in fbcon_do_set_font")
introduced an out-of-bounds access by storing data and allocation sizes
in the same variable. Restore the old size calculation and use the new
variable 'alloc_size' for the allocation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 1a194e6c8e1e ("fbcon: fix integer overflow in fbcon_do_set_font") Reported-by: Jani Nikula <jani.nikula@linux.intel.com> Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15020 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6201 Cc: Samasth Norway Ananda <samasth.norway.ananda@oracle.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: George Kennedy <george.kennedy@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Simona Vetter <simona@ffwll.ch> Cc: Helge Deller <deller@gmx.de> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Qianqiang Liu <qianqiang.liu@163.com> Cc: Shixiong Ou <oushixiong@kylinos.cn> Cc: Kees Cook <kees@kernel.org> Cc: <stable@vger.kernel.org> # v5.9+ Cc: Zsolt Kajtar <soci@c64.rulez.org> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Qianqiang Liu <qianqiang.liu@163.com> Link: https://lore.kernel.org/r/20250922134619.257684-1-tzimmermann@suse.de
drm/i915/ddi: Guard reg_val against a INVALID_TRANSCODER
Currently we check if the encoder is INVALID or -1 and throw a
WARN_ON but we still end up writing the temp value which will
overflow and corrupt the whole programmed value.
--v2
-Assign a bogus transcoder to master in case we get a INVALID
TRANSCODER [Jani]
Taotao Chen [Fri, 22 Aug 2025 03:06:59 +0000 (03:06 +0000)]
drm/i915: set O_LARGEFILE in __create_shmem()
Without O_LARGEFILE, file->f_op->write_iter calls
generic_write_check_limits(), which enforces a 2GB (MAX_NON_LFS) limit,
causing -EFBIG on large writes.
In shmem_pwrite(), this error is later masked as -EIO due to the error
handling order, leading to igt failures like gen9_exec_parse(bb-large).
Set O_LARGEFILE in __create_shmem() to prevent -EFBIG on large writes.
Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202508081029.343192ec-lkp@intel.com Fixes: 048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter") Signed-off-by: Taotao Chen <chentaotao@didiglobal.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/20250822030651.28099-1-chentaotao@didiglobal.com
(cherry picked from commit e296a2266c572a7537e638b0dbbfc66d11df46f9) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Fix integer overflow vulnerabilities in fbcon_do_set_font() where font
size calculations could overflow when handling user-controlled font
parameters.
The vulnerabilities occur when:
1. CALC_FONTSZ(h, pitch, charcount) performs h * pith * charcount
multiplication with user-controlled values that can overflow.
2. FONT_EXTRA_WORDS * sizeof(int) + size addition can also overflow
3. This results in smaller allocations than expected, leading to buffer
overflows during font data copying.
Add explicit overflow checking using check_mul_overflow() and
check_add_overflow() kernel helpers to safety validate all size
calculations before allocation.
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 39b3cffb8cf3 ("fbcon: prevent user font height or width change from causing potential out-of-bounds access") Cc: George Kennedy <george.kennedy@oracle.com> Cc: stable <stable@vger.kernel.org> Cc: syzbot+38a3699c7eaf165b97a6@syzkaller.appspotmail.com Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Simona Vetter <simona@ffwll.ch> Cc: Helge Deller <deller@gmx.de> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Qianqiang Liu <qianqiang.liu@163.com> Cc: Shixiong Ou <oushixiong@kylinos.cn> Cc: Kees Cook <kees@kernel.org> Cc: <stable@vger.kernel.org> # v5.9+ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250912170023.3931881-1-samasth.norway.ananda@oracle.com
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Fixes to the Allwinner and Renesas clk drivers:
- Do the math properly in Allwinner's ccu_mp_recalc_rate() so clk
rates aren't bogus
- Fix a clock domain regression on Renesas R-Car M1A, R-Car H1,
and RZ/A1 by registering the domain after the pmdomain bus is
registered instead of before"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: mp: Fix dual-divider clock rate readback
clk: renesas: mstp: Add genpd OF provider at postcore_initcall()
Merge tag 'firewire-fixes-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"When new structures and events were added to UAPI in v6.5 kernel, the
required update to the subsystem ABI version returned to userspace
client was overlooked. The version is now updated"
* tag 'firewire-fixes-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fix overlooked update of subsystem ABI version
firewire: core: fix overlooked update of subsystem ABI version
In kernel v6.5, several functions were added to the cdev layer. This
required updating the default version of subsystem ABI up to 6, but
this requirement was overlooked.
Merge tag '6.17-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Two unlink fixes: one for rename and one for deferred close
- Four smbdirect/RDMA fixes: fix buffer leak in negotiate, two fixes
for races in smbd_destroy, fix offset and length checks in recv_done
* tag '6.17-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix smbdirect_recv_io leak in smbd_negotiate() error path
smb: client: fix file open check in __cifs_unlink()
smb: client: let smbd_destroy() call disable_work_sync(&info->post_send_credits_work)
smb: client: use disable[_delayed]_work_sync in smbdirect.c
smb: client: fix filename matching of deferred files
smb: client: let recv_done verify data_offset, data_length and remaining_data_length
Merge tag 'iommu-fixes-v6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fixes for memory leak and memory corruption bugs on S390 and AMD-Vi
- Race condition fix in AMD-Vi page table code and S390 device attach
code
- Intel VT-d: Fix alignment checks in __domain_mapping()
- AMD-Vi: Fix potentially incorrect DTE settings when device has
aliases
* tag 'iommu-fixes-v6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/amd/pgtbl: Fix possible race while increase page table level
iommu/amd: Fix alias device DTE setting
iommu/s390: Make attach succeed when the device was surprise removed
iommu/vt-d: Fix __domain_mapping()'s usage of switch_to_super_page()
iommu/s390: Fix memory corruption when using identity domain
iommu/amd: Fix ivrs_base memleak in early_amd_iommu_init()
Merge tag 'io_uring-6.17-20250919' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Fix for a regression introduced in the io-wq worker creation logic.
- Remove the allocation cache for the msg_ring io_kiocb allocations. I
have a suspicion that there's a bug there, and since we just fixed
one in that area, let's just yank the use of that cache entirely.
It's not that important, and it kills some code.
- Treat a closed ring like task exiting in that any requests that
trigger post that condition should just get canceled. Doesn't fix any
real issues, outside of having tasks being able to rely on that
guarantee.
- Fix for a bug in the network zero-copy notification mechanism, where
a comparison for matching tctx/ctx for notifications was buggy in
that it didn't correctly compare with the previous notification.
* tag 'io_uring-6.17-20250919' of git://git.kernel.dk/linux:
io_uring: fix incorrect io_kiocb reference in io_link_skb
io_uring/msg_ring: kill alloc_cache for io_kiocb allocations
io_uring: include dying ring in task_work "should cancel" state
io_uring/io-wq: fix `max_workers` breakage and `nr_workers` underflow
Merge tag 'gpio-fixes-for-v6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an ACPI I2C HID driver breakage due to not initializing a
structure on the stack and passing garbage down to GPIO core
- ignore touchpad wakeup on GPD G1619-05
- fix debouncing configuration when looking up GPIOs in ACPI
* tag 'gpio-fixes-for-v6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: acpi: initialize acpi_gpio_info struct
gpiolib: acpi: Ignore touchpad wakeup on GPD G1619-05
gpiolib: acpi: Program debounce when finding GPIO
Merge tag 'mmc-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- mvsdio: Fix dma_unmap_sg() nents value
- sdhci: Fix clock management for UHS-II
- sdhci-pci-gli: Fix initialization of UHS-II for GL9767
* tag 'mmc-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci-gli: GL9767: Fix initializing the UHS-II interface during a power-on
mmc: sdhci-uhs2: Fix calling incorrect sdhci_set_clock() function
mmc: sdhci: Move the code related to setting the clock from sdhci_set_ios_common() into sdhci_set_ios()
mmc: mvsdio: Fix dma_unmap_sg() nents value
Merge tag 'pmdomain-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
"pmdomain core:
- Restore behaviour for disabling unused PM domains and introduce the
GENPD_FLAG_NO_STAY_ON configuration bit
Merge tag 'loongarch-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix some build warnings for RUST-enabled objtool check, align ACPI
structures for ARCH_STRICT_ALIGN, fix an unreliable stack for live
patching, add some NULL pointer checkings, and fix some bugs around
KVM"
* tag 'loongarch-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_pch_pic_regs_access()
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_sw_status_access()
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_regs_access()
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_ctrl_access()
LoongArch: KVM: Fix VM migration failure with PTW enabled
LoongArch: KVM: Remove unused returns and semicolons
LoongArch: vDSO: Check kcalloc() result in init_vdso()
LoongArch: Fix unreliable stack for live patching
LoongArch: Replace sprintf() with sysfs_emit()
LoongArch: Check the return value when creating kobj
LoongArch: Align ACPI structures if ARCH_STRICT_ALIGN enabled
LoongArch: Update help info of ARCH_STRICT_ALIGN
LoongArch: Handle jump tables options for RUST
LoongArch: Make LTO case independent in Makefile
objtool/LoongArch: Mark special atomic instruction as INSN_BUG type
objtool/LoongArch: Mark types based on break immediate code
Merge tag 'v6.17-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a NULL pointer dereference in ccp and a couple of bugs in
the af_alg interface"
* tag 'v6.17-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: af_alg - Disallow concurrent writes in af_alg_sendmsg
crypto: af_alg - Set merge to zero early in af_alg_sendmsg
crypto: ccp - Always pass in an error pointer to __sev_platform_shutdown_locked()
Merge tag 'sound-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. The volume became higher than wished, but
nothing really stands out -- all small, nice and smooth.
A slightly large change is found in qcom USB-audio offload stuff, but
this is a regression fix specific to this device, hence it should be
safe to apply at this late stage.
- Various small fixes for ASoC Cirrus, Realtek, lpass, Intel and
Qualcomm drivers
- ASoC SoundWire fixes
- A few TAS2781 HD-audio side-codec driver fixes
- A fix for Qualcomm USB-audio offload breakage
- Usual a few HD-audio quirks"
* tag 'sound-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
ALSA: hda/realtek: Fix mute led for HP Laptop 15-dw4xx
ALSA: hda: intel-dsp-config: Prevent SEGFAULT if ACPI_HANDLE() is NULL
ALSA: usb: qcom: Fix false-positive address space check
ASoC: rt5682s: Adjust SAR ADC button mode to fix noise issue
ASoC: Intel: PTL: Add entry for HDMI-In capture support to non-I2S codec boards.
ASoC: amd: acp: Fix incorrect retrival of acp_chip_info
ASoC: Intel: sof_sdw: use PRODUCT_FAMILY for Fatcat series
ASoC: qcom: sc8280xp: Fix sound card driver name match data for QCS8275
ALSA: hda/realtek: Fix volume control on Lenovo Thinkbook 13x Gen 4
ALSA: hda/realtek: Support Lenovo Thinkbook 13x Gen 5
ALSA: hda: cs35l41: Support Lenovo Thinkbook 13x Gen 5
ALSA: hda/realtek: Add ALC295 Dell TAS2781 I2C fixup
ALSA: hda/tas2781: Fix a potential race condition that causes a NULL pointer in case no efi.get_variable exsits
ASoC: qcom: sc8280xp: Enable DAI format configuration for MI2S interfaces
ASoC: qcom: q6apm-lpass-dais: Fix missing set_fmt DAI op for I2S
ASoC: qcom: audioreach: Fix lpaif_type configuration for the I2S interface
ASoC: Intel: catpt: Expose correct bit depth to userspace
ALSA: hda/tas2781: Fix the order of TAS2781 calibrated-data
ASoC: codecs: lpass-wsa-macro: Fix speaker quality distortion
ASoC: codecs: lpass-rx-macro: Fix playback quality distortion
...
Merge tag 'drm-fixes-2025-09-19' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes for drm, it's a bit busier than I'd like on the xe side
this week, but otherwise amdgpu and some smaller fixes for i915/bridge
and a revert on docs.
docs:
- fix docs build regression
i915:
- Honor VESA eDP backlight luminance control capability
bridge:
- anx7625: Fix NULL pointer dereference with early IRQ
- cdns-mhdp8546: Fix missing mutex unlock on error path
xe:
- Release kobject for the failure path
- SRIOV PF: Drop rounddown_pow_of_two fair
- Remove type casting on hwmon
- Defer free of NVM auxiliary container to device release
- Fix a NULL vs IS_ERR
- Add cleanup action in xe_device_sysfs_init
- Fix error handling if PXP fails to start
- Set GuC RCS/CCS yield policy
amdgpu:
- GC 11.0.1/4 cleaner shader support
- DC irq fix
- OD fix
amdkfd:
- S0ix fix"
* tag 'drm-fixes-2025-09-19' of https://gitlab.freedesktop.org/drm/kernel:
drm/amdgpu: suspend KFD and KGD user queues for S0ix
drm/amdkfd: add proper handling for S0ix
drm/xe/guc: Set RCS/CCS yield policy
drm/xe: Fix error handling if PXP fails to start
drm/xe/sysfs: Add cleanup action in xe_device_sysfs_init
drm/amd: Only restore cached manual clock settings in restore if OD enabled
drm/xe: Fix a NULL vs IS_ERR() in xe_vm_add_compute_exec_queue()
drm: bridge: cdns-mhdp8546: Fix missing mutex unlock on error path
drm/i915/backlight: Honor VESA eDP backlight luminance control capability
drm/amd/display: Allow RX6xxx & RX7700 to invoke amdgpu_irq_get/put
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.0.1/11.0.4 GPUs
drm: bridge: anx7625: Fix NULL pointer dereference with early IRQ
drm/xe: defer free of NVM auxiliary container to device release callback
drm/xe/hwmon: Remove type casting
drm/xe/pf: Drop rounddown_pow_of_two fair LMEM limitation
drm/xe/tile: Release kobject for the failure path
Revert "drm: Add directive to format code in comment"
Yang Xiuwei [Fri, 19 Sep 2025 09:03:52 +0000 (17:03 +0800)]
io_uring: fix incorrect io_kiocb reference in io_link_skb
In io_link_skb function, there is a bug where prev_notif is incorrectly
assigned using 'nd' instead of 'prev_nd'. This causes the context
validation check to compare the current notification with itself instead
of comparing it with the previous notification.
Fix by using the correct prev_nd parameter when obtaining prev_notif.
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Fixes: 6fe4220912d19 ("io_uring/notif: implement notification stacking") Signed-off-by: Jens Axboe <axboe@kernel.dk>
pci_set_drvdata sets the value of pdev->driver_data to NULL,
after which the driver_data obtained from the same dev is
dereferenced in oaktrail_hdmi_i2c_exit, and the i2c_dev is
extracted from it. To prevent this, swap these calls.
Found by Linux Verification Center (linuxtesting.org) with Svacer.
iommu/amd/pgtbl: Fix possible race while increase page table level
The AMD IOMMU host page table implementation supports dynamic page table levels
(up to 6 levels), starting with a 3-level configuration that expands based on
IOVA address. The kernel maintains a root pointer and current page table level
to enable proper page table walks in alloc_pte()/fetch_pte() operations.
The IOMMU IOVA allocator initially starts with 32-bit address and onces its
exhuasted it switches to 64-bit address (max address is determined based
on IOMMU and device DMA capability). To support larger IOVA, AMD IOMMU
driver increases page table level.
But in unmap path (iommu_v1_unmap_pages()), fetch_pte() reads
pgtable->[root/mode] without lock. So its possible that in exteme corner case,
when increase_address_space() is updating pgtable->[root/mode], fetch_pte()
reads wrong page table level (pgtable->mode). It does compare the value with
level encoded in page table and returns NULL. This will result is
iommu_unmap ops to fail and upper layer may retry/log WARN_ON.
CPU 0 CPU 1
------ ------
map pages unmap pages
alloc_pte() -> increase_address_space() iommu_v1_unmap_pages() -> fetch_pte()
pgtable->root = pte (new root value)
READ pgtable->[mode/root]
Reads new root, old mode
Updates mode (pgtable->mode += 1)
Since Page table level updates are infrequent and already synchronized with a
spinlock, implement seqcount to enable lock-free read operations on the read path.
Dave Airlie [Fri, 19 Sep 2025 01:19:36 +0000 (11:19 +1000)]
Merge tag 'drm-xe-fixes-2025-09-18' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Release kobject for the failure path (Shuicheng)
- SRIOV PF: Drop rounddown_pow_of_two fair (Michal)
- Remove type casting on hwmon (Mallesh)
- Defer free of NVM auxiliary container to device release (Nitin)
- Fix a NULL vs IS_ERR (Dan)
- Add cleanup action in xe_device_sysfs_init (Zongyao)
- Fix error handling if PXP fails to start (Daniele)
- Set GuC RCS/CCS yield policy (Daniele)
Merge tag 'trace-rv-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier fixes from Steven Rostedt:
- Fix build in some RISC-V flavours
Some system calls only are available for the 64bit RISC-V machines.
#ifdef out the cases of clock_nanosleep and futex in the sleep
monitor if they are not supported by the architecture.
- Fix wrong cast, obsolete after refactoring
Use container_of() to get to the rv_monitor structure from the
enable_monitors_next() 'p' pointer. The assignment worked only
because the list field used happened to be the first field of the
structure.
- Remove redundant include files
Some include files were listed twice. Remove the extra ones and sort
the includes.
- Fix missing unlock on failure
There was an error path that exited the rv_register_monitor()
function without releasing a lock. Change that to goto the lock
release.
- Add Gabriele Monaco to be Runtime Verifier maintainer
Gabriele is doing most of the work on RV as well as collecting
patches. Add him to the maintainers file for Runtime Verification.
* tag 'trace-rv-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Add Gabriele Monaco as maintainer for Runtime Verification
rv: Fix missing mutex unlock in rv_register_monitor()
include/linux/rv.h: remove redundant include file
rv: Fix wrong type cast in enabled_monitors_next()
rv: Support systems with time64-only syscalls
smb: client: fix smbdirect_recv_io leak in smbd_negotiate() error path
During tests of another unrelated patch I was able to trigger this
error: Objects remaining on __kmem_cache_shutdown()
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: f198186aa9bb ("CIFS: SMBD: Establish SMB Direct connection") Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Thu, 18 Sep 2025 15:30:32 +0000 (12:30 -0300)]
smb: client: fix file open check in __cifs_unlink()
Fix the file open check to decide whether or not silly-rename the file
in SMB2+.
Fixes: c5ea3065586d ("smb: client: fix data loss due to broken rename(2)") Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Cc: Frank Sorenson <sorenson@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
io_uring/msg_ring: kill alloc_cache for io_kiocb allocations
A recent commit:
fc582cd26e88 ("io_uring/msg_ring: ensure io_kiocb freeing is deferred for RCU")
fixed an issue with not deferring freeing of io_kiocb structs that
msg_ring allocates to after the current RCU grace period. But this only
covers requests that don't end up in the allocation cache. If a request
goes into the alloc cache, it can get reused before it is sane to do so.
A recent syzbot report would seem to indicate that there's something
there, however it may very well just be because of the KASAN poisoning
that the alloc_cache handles manually.
Rather than attempt to make the alloc_cache sane for that use case, just
drop the usage of the alloc_cache for msg_ring request payload data.
Alex Deucher [Wed, 17 Sep 2025 16:42:11 +0000 (12:42 -0400)]
drm/amdgpu: suspend KFD and KGD user queues for S0ix
We need to make sure the user queues are preempted so
GFX can enter gfxoff.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Tested-by: David Perry <david.perry@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f8b367e6fa1716cab7cc232b9e3dff29187fc99d) Cc: stable@vger.kernel.org
Alex Deucher [Wed, 17 Sep 2025 16:42:09 +0000 (12:42 -0400)]
drm/amdkfd: add proper handling for S0ix
When in S0i3, the GFX state is retained, so all we need to do
is stop the runlist so GFX can enter gfxoff.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Tested-by: David Perry <david.perry@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4bfa8609934dbf39bbe6e75b4f971469384b50b1) Cc: stable@vger.kernel.org
- net: clear sk->sk_ino in sk_set_socket(sk, NULL), fix CRIU
Previous releases - regressions:
- bonding: set random address only when slaves already exist
- rxrpc: fix untrusted unsigned subtract
- eth:
- ice: fix Rx page leak on multi-buffer frames
- mlx5: don't return mlx5_link_info table when speed is unknown
Previous releases - always broken:
- tls: make sure to abort the stream if headers are bogus
- tcp: fix null-deref when using TCP-AO with TCP_REPAIR
- dpll: fix skipping last entry in clock quality level reporting
- eth: qed: don't collect too many protection override GRC elements,
fix memory corruption"
* tag 'net-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
octeontx2-pf: Fix use-after-free bugs in otx2_sync_tstamp()
cnic: Fix use-after-free bugs in cnic_delete_task
devlink rate: Remove unnecessary 'static' from a couple places
MAINTAINERS: update sundance entry
net: liquidio: fix overflow in octeon_init_instr_queue()
net: clear sk->sk_ino in sk_set_socket(sk, NULL)
Revert "net/mlx5e: Update and set Xon/Xoff upon port speed set"
selftests: tls: test skb copy under mem pressure and OOB
tls: make sure to abort the stream if headers are bogus
selftest: packetdrill: Add tcp_fastopen_server_reset-after-disconnect.pkt.
tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect().
octeon_ep: fix VF MAC address lifecycle handling
selftests: bonding: add vlan over bond testing
bonding: don't set oif to bond dev when getting NS target destination
net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer
net/mlx5e: Add a miss level for ipsec crypto offload
net/mlx5e: Harden uplink netdev access against device unbind
MAINTAINERS: make the DPLL entry cover drivers
doc/netlink: Fix typos in operation attributes
igc: don't fail igc_probe() on LED setup error
...
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"These are mostly Oliver's Arm changes: lock ordering fixes for the
vGIC, and reverts for a buggy attempt to avoid RCU stalls on large
VMs.
Arm:
- Invalidate nested MMUs upon freeing the PGD to avoid WARNs when
visiting from an MMU notifier
- Fixes to the TLB match process and TLB invalidation range for
managing the VCNR pseudo-TLB
- Prevent SPE from erroneously profiling guests due to UNKNOWN reset
values in PMSCR_EL1
- Fix save/restore of host MDCR_EL2 to account for eagerly
programming at vcpu_load() on VHE systems
- Correct lock ordering when dealing with VGIC LPIs, avoiding
scenarios where an xarray's spinlock was nested with a *raw*
spinlock
- Permit stage-2 read permission aborts which are possible in the
case of NV depending on the guest hypervisor's stage-2 translation
- Call raw_spin_unlock() instead of the internal spinlock API
- Fix parameter ordering when assigning VBAR_EL1
- Reverted a couple of fixes for RCU stalls when destroying a stage-2
page table.
There appears to be some nasty refcounting / UAF issues lurking in
those patches and the band-aid we tried to apply didn't hold.
s390:
- mm fixes, including userfaultfd bug fix
x86:
- Sync the vTPR from the local APIC to the VMCB even when AVIC is
active.
This fixes a bug where host updates to the vTPR, e.g. via
KVM_SET_LAPIC or emulation of a guest access, are lost and result
in interrupt delivery issues in the guest"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Sync TPR from LAPIC into VMCB::V_TPR even if AVIC is active
Revert "KVM: arm64: Split kvm_pgtable_stage2_destroy()"
Revert "KVM: arm64: Reschedule as needed when destroying the stage-2 page-tables"
KVM: arm64: vgic: fix incorrect spinlock API usage
KVM: arm64: Remove stage 2 read fault check
KVM: arm64: Fix parameter ordering for VBAR_EL1 assignment
KVM: arm64: nv: Fix incorrect VNCR invalidation range calculation
KVM: arm64: vgic-v3: Indicate vgic_put_irq() may take LPI xarray lock
KVM: arm64: vgic-v3: Don't require IRQs be disabled for LPI xarray lock
KVM: arm64: vgic-v3: Erase LPIs from xarray outside of raw spinlocks
KVM: arm64: Spin off release helper from vgic_put_irq()
KVM: arm64: vgic-v3: Use bare refcount for VGIC LPIs
KVM: arm64: vgic: Drop stale comment on IRQ active state
KVM: arm64: VHE: Save and restore host MDCR_EL2 value correctly
KVM: arm64: Initialize PMSCR_EL1 when in VHE
KVM: arm64: nv: fix VNCR TLB ASID match logic for non-Global entries
KVM: s390: Fix FOLL_*/FAULT_FLAG_* confusion
KVM: s390: Fix incorrect usage of mmu_notifier_register()
KVM: s390: Fix access to unavailable adapter indicator pages during postcopy
KVM: arm64: Mark freed S2 MMUs as invalid
io_uring: include dying ring in task_work "should cancel" state
When running task_work for an exiting task, rather than perform the
issue retry attempt, the task_work is canceled. However, this isn't
done for a ring that has been closed. This can lead to requests being
successfully completed post the ring being closed, which is somewhat
confusing and surprising to an application.
Rather than just check the task exit state, also include the ring
ref state in deciding whether or not to terminate a given request when
run from task_work.
Merge tag 'platform-drivers-x86-v6.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and new HW support:
- amd/pmc: Add MECHREVO Yilong15Pro to spurious_8042 list
- amd/pmf: Support new ACPI ID AMDI0108
- asus-wmi: Re-add extra keys to ignore_key_wlan quirk
- oxpec: Add support for AOKZOE A1X and OneXPlayer X1Pro EVA-02"
* tag 'platform-drivers-x86-v6.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-wmi: Re-add extra keys to ignore_key_wlan quirk
platform/x86/amd/pmf: Support new ACPI ID AMDI0108
platform/x86: oxpec: Add support for AOKZOE A1X
platform/x86: oxpec: Add support for OneXPlayer X1Pro EVA-02
platform/x86/amd/pmc: Add MECHREVO Yilong15Pro to spurious_8042 list
Merge tag 'uml-for-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML fixes from Johannes Berg:
"A few fixes for UML, which I'd meant to send earlier but then forgot.
All of them are pretty long-standing issues that are either not really
happening (the UAF), in rarely used code (the FD buffer issue), or an
issue only for some host configurations (the executable stack):
- mark stack not executable to work on more modern systems with
selinux
* tag 'uml-for-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Fix FD copy size in os_rcv_fd_msg()
um: virtio_uml: Fix use-after-free after put_device in probe
um: Don't mark stack executable
octeontx2-pf: Fix use-after-free bugs in otx2_sync_tstamp()
The original code relies on cancel_delayed_work() in otx2_ptp_destroy(),
which does not ensure that the delayed work item synctstamp_work has fully
completed if it was already running. This leads to use-after-free scenarios
where otx2_ptp is deallocated by otx2_ptp_destroy(), while synctstamp_work
remains active and attempts to dereference otx2_ptp in otx2_sync_tstamp().
Furthermore, the synctstamp_work is cyclic, the likelihood of triggering
the bug is nonnegligible.
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
otx2_remove() |
otx2_ptp_destroy() | otx2_sync_tstamp()
cancel_delayed_work() |
kfree(ptp) |
| ptp = container_of(...); //UAF
| ptp-> //UAF
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the delayed work item is properly canceled before the otx2_ptp is
deallocated.
This bug was initially identified through static analysis. To reproduce
and test it, I simulated the OcteonTX2 PCI device in QEMU and introduced
artificial delays within the otx2_sync_tstamp() function to increase the
likelihood of triggering the bug.
Fixes: 2958d17a8984 ("octeontx2-pf: Add support for ptp 1-step mode on CN10K silicon") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(),
which does not guarantee that the delayed work item 'delete_task' has
fully completed if it was already running. Additionally, the delayed work
item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only
blocks and waits for work items that were already queued to the
workqueue prior to its invocation. Any work items submitted after
flush_workqueue() is called are not included in the set of tasks that the
flush operation awaits. This means that after the cyclic work items have
finished executing, a delayed work item may still exist in the workqueue.
This leads to use-after-free scenarios where the cnic_dev is deallocated
by cnic_free_dev(), while delete_task remains active and attempt to
dereference cnic_dev in cnic_delete_task().
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
cnic_netdev_event() |
cnic_stop_hw() | cnic_delete_task()
cnic_cm_stop_bnx2x_hw() | ...
cancel_delayed_work() | /* the queue_delayed_work()
flush_workqueue() | executes after flush_workqueue()*/
| queue_delayed_work()
cnic_free_dev(dev)//free | cnic_delete_task() //new instance
| dev = cp->dev; //use
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the cyclic delayed work item is properly canceled and that any
ongoing execution of the work item completes before the cnic_dev is
deallocated. Furthermore, since cancel_delayed_work_sync() uses
__flush_work(work, true) to synchronously wait for any currently
executing instance of the work item to finish, the flush_workqueue()
becomes redundant and should be removed.
This bug was identified through static analysis. To reproduce the issue
and validate the fix, I simulated the cnic PCI device in QEMU and
introduced intentional delays — such as inserting calls to ssleep()
within the cnic_delete_task() function — to increase the likelihood
of triggering the bug.
devlink rate: Remove unnecessary 'static' from a couple places
devlink_rate_node_get_by_name() and devlink_rate_nodes_destroy() have a
couple of unnecessary static variables for iterating over devlink rates.
This could lead to races/corruption/unhappiness if two concurrent
operations execute the same function.
Remove 'static' from both. It's amazing this was missed for 4+ years.
While at it, I confirmed there are no more examples of this mistake in
net/ with 1, 2 or 3 levels of indentation.
net: liquidio: fix overflow in octeon_init_instr_queue()
The expression `(conf->instr_type == 64) << iq_no` can overflow because
`iq_no` may be as high as 64 (`CN23XX_MAX_RINGS_PER_PF`). Casting the
operand to `u64` ensures correct 64-bit arithmetic.
Fixes: f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters") Signed-off-by: Alexey Nepomnyashih <sdl@nppct.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Revert "net/mlx5e: Update and set Xon/Xoff upon port speed set"
This reverts commit d24341740fe48add8a227a753e68b6eedf4b385a.
It causes errors when trying to configure QoS, as well as
loss of L2 connectivity (on multi-host devices).
Reported-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/20250910170011.70528106@kernel.org Fixes: d24341740fe4 ("net/mlx5e: Update and set Xon/Xoff upon port speed set") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bibo Mao [Thu, 18 Sep 2025 11:44:25 +0000 (19:44 +0800)]
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_pch_pic_regs_access()
Function copy_from_user() and copy_to_user() may sleep because of page
fault, and they cannot be called in spin_lock hold context. Here move
function calling of copy_from_user() and copy_to_user() out of spinlock
context in function kvm_pch_pic_regs_access().
Bibo Mao [Thu, 18 Sep 2025 11:44:22 +0000 (19:44 +0800)]
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_sw_status_access()
Function copy_from_user() and copy_to_user() may sleep because of page
fault, and they cannot be called in spin_lock hold context. Here move
funtcion calling of copy_from_user() and copy_to_user() out of function
kvm_eiointc_sw_status_access().
Bibo Mao [Thu, 18 Sep 2025 11:44:22 +0000 (19:44 +0800)]
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_regs_access()
Function copy_from_user() and copy_to_user() may sleep because of page
fault, and they cannot be called in spin_lock hold context. Here move
function calling of copy_from_user() and copy_to_user() before spinlock
context in function kvm_eiointc_ctrl_access().
Bibo Mao [Thu, 18 Sep 2025 11:44:22 +0000 (19:44 +0800)]
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_ctrl_access()
Function copy_from_user() and copy_to_user() may sleep because of page
fault, and they cannot be called in spin_lock hold context. Here move
function calling of copy_from_user() and copy_to_user() before spinlock
context in function kvm_eiointc_ctrl_access().
Bibo Mao [Thu, 18 Sep 2025 11:44:22 +0000 (19:44 +0800)]
LoongArch: KVM: Fix VM migration failure with PTW enabled
With PTW disabled system, bit _PAGE_DIRTY is a HW bit for page writing.
However with PTW enabled system, bit _PAGE_WRITE is also a "HW bit" for
page writing, because hardware synchronizes _PAGE_WRITE to _PAGE_DIRTY
automatically. Previously, _PAGE_WRITE is treated as a SW bit to record
the page writeable attribute for the fast page fault handling in the
secondary MMU, however with PTW enabled machine, this bit is used by HW
already (so setting it will silence the TLB modify exception).
Here define KVM_PAGE_WRITEABLE with the SW bit _PAGE_MODIFIED, so that
it can work on both PTW disabled and enabled machines. And for HW write
bits, both _PAGE_DIRTY and _PAGE_WRITE are set or clear together.
Cc: stable@vger.kernel.org Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Tao Cui [Thu, 18 Sep 2025 11:44:22 +0000 (19:44 +0800)]
LoongArch: KVM: Remove unused returns and semicolons
The default branch has already handled all undefined cases, so the final
return statement is redundant. Redundant semicolons are removed, too.
Cc: stable@vger.kernel.org Reviewed-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Tao Cui <cuitao@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Guangshuo Li [Thu, 18 Sep 2025 11:44:10 +0000 (19:44 +0800)]
LoongArch: vDSO: Check kcalloc() result in init_vdso()
Add a NULL-pointer check after the kcalloc() call in init_vdso(). If
allocation fails, return -ENOMEM to prevent a possible dereference of
vdso_info.code_mapping.pages when it is NULL.
Cc: stable@vger.kernel.org Fixes: 2ed119aef60d ("LoongArch: Set correct size for vDSO code mapping") Signed-off-by: Guangshuo Li <202321181@mail.sdu.edu.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Tiezhu Yang [Thu, 18 Sep 2025 11:44:08 +0000 (19:44 +0800)]
LoongArch: Fix unreliable stack for live patching
When testing the kernel live patching with "modprobe livepatch-sample",
there is a timeout over 15 seconds from "starting patching transition"
to "patching complete". The dmesg command shows "unreliable stack" for
user tasks in debug mode, here is one of the messages:
livepatch: klp_try_switch_task: bash:1193 has an unreliable stack
The "unreliable stack" is because it can not unwind from do_syscall()
to its previous frame handle_syscall(). It should use fp to find the
original stack top due to secondary stack in do_syscall(), but fp is
not used for some other functions, then fp can not be restored by the
next frame of do_syscall(), so it is necessary to save fp if task is
not current, in order to get the stack top of do_syscall().
Tao Cui [Thu, 18 Sep 2025 11:44:04 +0000 (19:44 +0800)]
LoongArch: Replace sprintf() with sysfs_emit()
As Documentation/filesystems/sysfs.rst suggested, show() should only use
sysfs_emit() or sysfs_emit_at() when formatting the value to be returned
to user space.
No functional change intended.
Cc: stable@vger.kernel.org Signed-off-by: Tao Cui <cuitao@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
LoongArch: Align ACPI structures if ARCH_STRICT_ALIGN enabled
ARCH_STRICT_ALIGN is used for hardware without UAL, now it only control
the -mstrict-align flag. However, ACPI structures are packed by default
so will cause unaligned accesses.
To avoid this, define ACPI_MISALIGNMENT_NOT_SUPPORTED in asm/acenv.h to
align ACPI structures if ARCH_STRICT_ALIGN enabled.
Cc: stable@vger.kernel.org Reported-by: Binbin Zhou <zhoubinbin@loongson.cn> Suggested-by: Xi Ruoyao <xry111@xry111.site> Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Tiezhu Yang [Thu, 18 Sep 2025 11:43:42 +0000 (19:43 +0800)]
LoongArch: Update help info of ARCH_STRICT_ALIGN
Loongson-3A6000 and 3C6000 CPUs also support unaligned memory access, so
the current description is out of date to some extent.
Actually, all of Loongson-3 series processors based on LoongArch support
unaligned memory access, this hardware capability is indicated by the bit
20 (UAL) of CPUCFG1 register, update the help info to reflect the reality.
Cc: stable@vger.kernel.org Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Tiezhu Yang [Thu, 18 Sep 2025 11:43:42 +0000 (19:43 +0800)]
LoongArch: Handle jump tables options for RUST
When compiling with LLVM and CONFIG_RUST is set, there exist objtool
warnings in rust/core.o and rust/kernel.o, like this:
rust/core.o: warning: objtool:
_RNvXs1_NtNtCs5QSdWC790r4_4core5ascii10ascii_charNtB5_9AsciiCharNtNtB9_3fmt5Debug3fmt+0x54:
sibling call from callable instruction with modified stack frame
For this special case, the related object file shows that there is no
generated relocation section '.rela.discard.tablejump_annotate' for the
table jump instruction jirl, thus objtool can not know that what is the
actual destination address.
If rustc has the option "-Cllvm-args=--loongarch-annotate-tablejump",
pass the option to enable jump tables for objtool, otherwise it should
pass "-Zno-jump-tables" to keep compatibility with older rustc.
Tiezhu Yang [Thu, 18 Sep 2025 11:43:36 +0000 (19:43 +0800)]
objtool/LoongArch: Mark special atomic instruction as INSN_BUG type
When compiling with LLVM and CONFIG_RUST is set, there exists the
following objtool warning:
rust/compiler_builtins.o: warning: objtool: __rust__unordsf2(): unexpected end of section .text.unlikely.
objdump shows that the end of section .text.unlikely is an atomic
instruction:
amswap.w $zero, $ra, $zero
According to the LoongArch Reference Manual, if the amswap.w atomic
memory access instruction has the same register number as rd and rj,
the execution will trigger an Instruction Non-defined Exception, so
mark the above instruction as INSN_BUG type to fix the warning.
Cc: stable@vger.kernel.org Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Qu Wenruo [Mon, 25 Aug 2025 10:26:26 +0000 (19:56 +0930)]
btrfs: reject invalid compression level
Inspired by recent changes to compression level parsing in 6db1df415d73fc ("btrfs: accept and ignore compression level for lzo")
it turns out that we do not do any extra validation for compression
level input string, thus allowing things like "compress=lzo:invalid" to
be accepted without warnings.
Although we accept levels that are beyond the supported algorithm
ranges, accepting completely invalid level specification is not correct.
Fix the too loose checks for compression level, by doing proper error
handling of kstrtoint(), so that we will reject not only too large
values (beyond int range) but also completely wrong levels like
"lzo:invalid".
Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Jakub Kicinski [Wed, 17 Sep 2025 00:28:13 +0000 (17:28 -0700)]
tls: make sure to abort the stream if headers are bogus
Normally we wait for the socket to buffer up the whole record
before we service it. If the socket has a tiny buffer, however,
we read out the data sooner, to prevent connection stalls.
Make sure that we abort the connection when we find out late
that the record is actually invalid. Retrying the parsing is
fine in itself but since we copy some more data each time
before we parse we can overflow the allocated skb space.
Constructing a scenario in which we're under pressure without
enough data in the socket to parse the length upfront is quite
hard. syzbot figured out a way to do this by serving us the header
in small OOB sends, and then filling in the recvbuf with a large
normal send.
Make sure that tls_rx_msg_size() aborts strp, if we reach
an invalid record there's really no way to recover.
Reported-by: Lee Jones <lee@kernel.org> Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser") Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250917002814.1743558-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Herbert Xu [Tue, 16 Sep 2025 09:20:59 +0000 (17:20 +0800)]
crypto: af_alg - Disallow concurrent writes in af_alg_sendmsg
Issuing two writes to the same af_alg socket is bogus as the
data will be interleaved in an unpredictable fashion. Furthermore,
concurrent writes may create inconsistencies in the internal
socket state.
Disallow this by adding a new ctx->write field that indiciates
exclusive ownership for writing.
Fixes: 8ff590903d5 ("crypto: algif_skcipher - User-space interface for skcipher operations") Reported-by: Muhammad Alifa Ramdhan <ramdhan@starlabs.sg> Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Tue, 16 Sep 2025 07:42:41 +0000 (15:42 +0800)]
crypto: af_alg - Set merge to zero early in af_alg_sendmsg
If an error causes af_alg_sendmsg to abort, ctx->merge may contain
a garbage value from the previous loop. This may then trigger a
crash on the next entry into af_alg_sendmsg when it attempts to do
a merge that can't be done.
Fix this by setting ctx->merge to zero near the start of the loop.
Fixes: 8ff590903d5 ("crypto: algif_skcipher - User-space interface for skcipher operations") Reported-by: Muhammad Alifa Ramdhan <ramdhan@starlabs.sg> Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Merge tag 'mm-hotfixes-stable-2025-09-17-21-10' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"15 hotfixes. 11 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 13 of these
fixes are for MM.
The usual shower of singletons, plus
- fixes from Hugh to address various misbehaviors in get_user_pages()
- patches from SeongJae to address a quite severe issue in DAMON
- another series also from SeongJae which completes some fixes for a
DAMON startup issue"
* tag 'mm-hotfixes-stable-2025-09-17-21-10' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
zram: fix slot write race condition
nilfs2: fix CFI failure when accessing /sys/fs/nilfs2/features/*
samples/damon/mtier: avoid starting DAMON before initialization
samples/damon/prcl: avoid starting DAMON before initialization
samples/damon/wsse: avoid starting DAMON before initialization
MAINTAINERS: add Lance Yang as a THP reviewer
MAINTAINERS: add Jann Horn as rmap reviewer
mm/damon/sysfs: use dynamically allocated repeat mode damon_call_control
mm/damon/core: introduce damon_call_control->dealloc_on_cancel
mm: folio_may_be_lru_cached() unless folio_test_large()
mm: revert "mm: vmscan.c: fix OOM on swap stress test"
mm: revert "mm/gup: clear the LRU flag of a page before adding to LRU batch"
mm/gup: local lru_add_drain() to avoid lru_add_drain_all()
mm/gup: check ref_count instead of lru before migration
David Sterba [Mon, 15 Sep 2025 06:37:47 +0000 (08:37 +0200)]
btrfs: ref-verify: handle damaged extent root tree
Syzbot hits a problem with enabled ref-verify, ignorebadroots and a
fuzzed/damaged extent tree. There's no fallback option like in other
places that can deal with it so disable the whole ref-verify as it is
just a debugging feature.
btrfs: tree-checker: fix the incorrect inode ref size check
[BUG]
Inside check_inode_ref(), we need to make sure every structure,
including the btrfs_inode_extref header, is covered by the item. But
our code is incorrectly using "sizeof(iref)", where @iref is just a
pointer.
This means "sizeof(iref)" will always be "sizeof(void *)", which is much
smaller than "sizeof(struct btrfs_inode_extref)".
This will allow some bad inode extrefs to sneak in, defeating tree-checker.
[FIX]
Fix the typo by calling "sizeof(*iref)", which is the same as
"sizeof(struct btrfs_inode_extref)", and will be the correct behavior we
want.
Fixes: 71bf92a9b877 ("btrfs: tree-checker: Add check for INODE_REF") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
It means rxe_post_recv was called after rdma_destroy_qp().
This happened because put_receive_buffer() was triggered
by ib_drain_qp() and called:
queue_work(info->workqueue, &info->post_send_credits_work);
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: f198186aa9bb ("CIFS: SMBD: Establish SMB Direct connection") Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: use disable[_delayed]_work_sync in smbdirect.c
This makes it safer during the disconnect and avoids
requeueing.
It's ok to call disable[delayed_]work[_sync]() more than once.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: 050b8c374019 ("smbd: Make upper layer decide when to destroy the transport") Fixes: f198186aa9bb ("CIFS: SMBD: Establish SMB Direct connection") Fixes: c7398583340a ("CIFS: SMBD: Implement RDMA memory registration") Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Wed, 17 Sep 2025 19:03:22 +0000 (16:03 -0300)]
smb: client: fix filename matching of deferred files
Fix the following case where the client would end up closing both
deferred files (foo.tmp & foo) after unlink(foo) due to strstr() call
in cifs_close_deferred_file_under_dentry():
smb: client: let recv_done verify data_offset, data_length and remaining_data_length
This is inspired by the related server fixes.
Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Reviewed-by: Namjae Jeon <linkinjeon@kernel.org> Fixes: f198186aa9bb ("CIFS: SMBD: Establish SMB Direct connection") Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Merge tag '6.17-rc6-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Two fixes for remaining_data_length and offset checks in receive path
- Don't go over max SGEs which caused smbdirect send to fail (and
trigger disconnect)
* tag '6.17-rc6-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: smbdirect: verify remaining_data_length respects max_fragmented_recv_size
ksmbd: smbdirect: validate data_offset and data_length field of smb_direct_data_transfer
smb: server: let smb_direct_writev() respect SMB_DIRECT_MAX_SEND_SGES
All recent platforms (including all the ones officially supported by the
Xe driver) do not allow concurrent execution of RCS and CCS workloads
from different address spaces, with the HW blocking the context switch
when it detects such a scenario.
The DUAL_QUEUE flag helps with this, by causing the GuC to not submit a
context it knows will not be able to execute. This, however, causes a new
problem: if RCS and CCS queues have pending workloads from different
address spaces, the GuC needs to choose from which of the 2 queues to
pick the next workload to execute. By default, the GuC prioritizes RCS
submissions over CCS ones, which can lead to CCS workloads being
significantly (or completely) starved of execution time.
The driver can tune this by setting a dedicated scheduling policy KLV;
this KLV allows the driver to specify a quantum (in ms) and a ratio
(percentage value between 0 and 100), and the GuC will prioritize the CCS
for that percentage of each quantum.
Given that we want to guarantee enough RCS throughput to avoid missing
frames, we set the yield policy to 20% of each 80ms interval.
v2: updated quantum and ratio, improved comment, use xe_guc_submit_disable
in gt_sanitize
Fixes: d9a1ae0d17bd ("drm/xe/guc: Enable WA_DUAL_QUEUE for newer platforms") Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Tested-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Link: https://lore.kernel.org/r/20250905235632.3333247-2-daniele.ceraolospurio@intel.com
(cherry picked from commit 88434448438e4302e272b2a2b810b42e05ea024b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo added #include "xe_guc_submit.h" while backporting]
Merge tag 'probes-fixes-v6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probe fix from Masami Hiramatsu:
- kprobe-event: Fix null-ptr-deref in trace_kprobe_create_internal(),
by handling NULL return of kmemdup() correctly
* tag 'probes-fixes-v6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: kprobe-event: Fix null-ptr-deref in trace_kprobe_create_internal()
For ice:
Jake resolves leaking pages with multi-buffer frames when a 0-sized
descriptor is encountered.
For i40e:
Maciej removes a redundant, and incorrect, memory barrier.
For ixgbe:
Jedrzej adjusts lifespan of ACI lock to ensure uses are while it is
valid.
For igc:
Kohei Enju does not fail probe on LED setup failure which resolves a
kernel panic in the cleanup path, if we were to fail.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: don't fail igc_probe() on LED setup error
ixgbe: destroy aci.lock later within ixgbe_remove path
ixgbe: initialize aci.lock before it's used
i40e: remove redundant memory barrier when cleaning Tx descs
ice: fix Rx page leak on multi-buffer frames
====================
Jakub Kicinski [Wed, 17 Sep 2025 23:12:46 +0000 (16:12 -0700)]
Merge tag 'wireless-2025-09-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just two fixes:
- fix crash in rfkill due to uninitialized type_name
- fix aggregation in iwlwifi 7000/8000 devices
* tag 'wireless-2025-09-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer
wifi: iwlwifi: pcie: fix byte count table for some devices
====================
The test reproduces the scenario explained in the previous patch.
Without the patch, the test triggers the warning and cannot see the last
retransmitted packet.
# ./ksft_runner.sh tcp_fastopen_server_reset-after-disconnect.pkt
TAP version 13
1..2
[ 29.229250] ------------[ cut here ]------------
[ 29.231414] WARNING: CPU: 26 PID: 0 at net/ipv4/tcp_timer.c:542 tcp_retransmit_timer+0x32/0x9f0
...
tcp_fastopen_server_reset-after-disconnect.pkt:26: error handling packet: Timed out waiting for packet
not ok 1 ipv4
tcp_fastopen_server_reset-after-disconnect.pkt:26: error handling packet: Timed out waiting for packet
not ok 2 ipv6
# Totals: pass:0 fail:2 xfail:0 xpass:0 skip:0 error:0
tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect().
syzbot reported the splat below where a socket had tcp_sk(sk)->fastopen_rsk
in the TCP_ESTABLISHED state. [0]
syzbot reused the server-side TCP Fast Open socket as a new client before
the TFO socket completes 3WHS:
1. accept()
2. connect(AF_UNSPEC)
3. connect() to another destination
As of accept(), sk->sk_state is TCP_SYN_RECV, and tcp_disconnect() changes
it to TCP_CLOSE and makes connect() possible, which restarts timers.
Since tcp_disconnect() forgot to clear tcp_sk(sk)->fastopen_rsk, the
retransmit timer triggered the warning and the intended packet was not
retransmitted.
Let's call reqsk_fastopen_remove() in tcp_disconnect().
Fixes: 8336886f786f ("tcp: TCP Fast Open Server - support TFO listeners") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250915175800.118793-2-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, VF MAC address info is not updated when the MAC address is
configured from VF, and it is not cleared when the VF is removed. This
leads to stale or missing MAC information in the PF, which may cause
incorrect state tracking or inconsistencies when VFs are hot-plugged
or reassigned.
Fix this by:
- storing the VF MAC address in the PF when it is set from VF
- clearing the stored VF MAC address when the VF is removed
This ensures that the PF always has correct VF MAC state.
Fixes: cde29af9e68e ("octeon_ep: add PF-VF mailbox communication") Signed-off-by: Sathesh B Edara <sedara@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250916133207.21737-1-sedara@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu [Tue, 16 Sep 2025 08:01:26 +0000 (08:01 +0000)]
bonding: don't set oif to bond dev when getting NS target destination
Unlike IPv4, IPv6 routing strictly requires the source address to be valid
on the outgoing interface. If the NS target is set to a remote VLAN interface,
and the source address is also configured on a VLAN over a bond interface,
setting the oif to the bond device will fail to retrieve the correct
destination route.
Fix this by not setting the oif to the bond device when retrieving the NS
target destination. This allows the correct destination device (the VLAN
interface) to be determined, so that bond_verify_device_path can return the
proper VLAN tags for sending NS messages.
Reported-by: David Wilder <wilder@us.ibm.com> Closes: https://lore.kernel.org/netdev/aGOKggdfjv0cApTO@fedora/ Suggested-by: Jay Vosburgh <jv@jvosburgh.net> Tested-by: David Wilder <wilder@us.ibm.com> Acked-by: Jay Vosburgh <jv@jvosburgh.net> Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20250916080127.430626-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / ceph-client.git / log