Linus Torvalds [Sat, 24 Jan 2026 17:02:56 +0000 (09:02 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull arm64 kvm fixes from Paolo Bonzini:
- Ensure early return semantics are preserved for pKVM fault handlers
- Fix case where the kernel runs with the guest's PAN value when
CONFIG_ARM64_PAN is not set
- Make stage-1 walks to set the access flag respect the access
permission of the underlying stage-2, when enabled
- Propagate computed FGT values to the pKVM view of the vCPU at
vcpu_load()
- Correctly program PXN and UXN privilege bits for hVHE's stage-1 page
tables
- Check that the VM is actually using VGICv3 before accessing the GICv3
CPU interface
- Delete some unused code
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Invert KVM_PGTABLE_WALK_HANDLE_FAULT to fix pKVM walkers
KVM: arm64: Don't blindly set set PSTATE.PAN on guest exit
KVM: arm64: nv: Respect stage-2 write permssion when setting stage-1 AF
KVM: arm64: Remove unused vcpu_{clear,set}_wfx_traps()
KVM: arm64: Remove unused parameter in synchronize_vcpu_pstate()
KVM: arm64: Remove extra argument for __pvkm_host_{share,unshare}_hyp()
KVM: arm64: Inject UNDEF for a register trap without accessor
KVM: arm64: Copy FGT traps to unprotected pKVM VCPU on VCPU load
KVM: arm64: Fix EL2 S1 XN handling for hVHE setups
KVM: arm64: gic: Check for vGICv3 when clearing TWI
Linus Torvalds [Fri, 23 Jan 2026 22:58:51 +0000 (14:58 -0800)]
Merge tag 'kbuild-fixes-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull kbuild fixes from Nicolas Schier:
- Reduce possible complications when cross-compiling by increasing use
of ${NM} in check-function-names.sh
- Fix static linking of nconf
* tag 'kbuild-fixes-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kconfig: fix static linking of nconf
kbuild: prefer ${NM} in check-function-names.sh
Linus Torvalds [Fri, 23 Jan 2026 21:56:04 +0000 (13:56 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- A set of fixes for FPSIMD/SVE/SME state management (around signal
handling and ptrace) where a task can be placed in an invalid state
- __nocfi added to swsusp_arch_resume() to avoid a data abort on
resuming from hibernate
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Set __nocfi on swsusp_arch_resume()
arm64/fpsimd: signal: Fix restoration of SVE context
arm64/fpsimd: signal: Allocate SSVE storage when restoring ZA
arm64/fpsimd: ptrace: Fix SVE writes on !SME systems
Linus Torvalds [Fri, 23 Jan 2026 21:40:55 +0000 (13:40 -0800)]
Merge tag 'v6.19-rc6-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Use the original nents value for ib_dma_unmap_sg(), preventing
potential memory corruption in the RDMA transport layer
- Fix a naming discrepancy in the kernel-doc for
ksmbd_vfs_kern_path_start_removing() as identified by sparse static
analysis
- Reset smb_direct_port to its default value during initialization to
ensure the correct port is used when switching between different RDMA
device types without module reload
* tag 'v6.19-rc6-server-fixes' of git://git.samba.org/ksmbd:
smb: server: reset smb_direct_port = SMB_DIRECT_PORT_INFINIBAND on init
smb: server: fix comment for ksmbd_vfs_kern_path_start_removing()
ksmbd: smbd: fix dma_unmap_sg() nents
Linus Torvalds [Fri, 23 Jan 2026 21:20:24 +0000 (13:20 -0800)]
Merge tag 'pci-v6.19-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Fix the pci_do_resource_release_and_resize() failure path, which
clobbered the intended failure return value (Ilpo Järvinen)
- Restore resizable BAR size before value because the size determines
which bits are writable; this fixes i915 and xe regressions (Ilpo
Järvinen)
* tag 'pci-v6.19-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Fix Resizable BAR restore order
PCI: Fix BAR resize rollback path overwriting ret
* tag 'platform-drivers-x86-v6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (21 commits)
platform/x86: acer-wmi: Fix missing capability check
platform/x86: acer-wmi: Extend support for Acer Nitro AN515-58
platform/x86: asus-armoury: add support for GA403WW
platform/x86: asus-armoury: keep the list ordered alphabetically
platform/x86: asus-armoury: add support for G835L
platform/x86: asus-armoury: fix ppt data for FA608UM
platform/x86: hp-bioscfg: Fix automatic module loading
platform/x86: hp-bioscfg: Fix kernel panic in GET_INSTANCE_ID macro
platform/x86: hp-bioscfg: Fix kobject warnings for empty attribute names
platform/x86: asus-wmi: fix sending OOBE at probe
platform/x86: asus-armoury: add support for FA617XT
platform/x86: asus-armoury: add support for FA401UV
platform/x86: asus-armoury: add support for GV302XV
platform/x86: asus-armoury: Add power limits for Asus G513QY
platform/x86/amd: Fix memory leak in wbrf_record()
platform/mellanox: Fix SN5640/SN5610 LED platform data
docs: fix PPR for AMD EPYC broken link
docs: alienware-wmi: fix typo
platform/x86: asus-armoury: add support for GA403UV
asus-armoury: fix ppt data for GA403U* renaming to GA403UI
...
Linus Torvalds [Fri, 23 Jan 2026 21:12:49 +0000 (13:12 -0800)]
Merge tag 'pmdomain-v6.19-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- imx: Remove incorrect reset/clock mask for 8mq vpu
- rockchip: Fix initial state of PM domain
* tag 'pmdomain-v6.19-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain:rockchip: Fix init genpd as GENPD_STATE_ON before regulator ready
pmdomain: imx8m-blk-ctrl: Remove separate rst and clk mask for 8mq vpu
Linus Torvalds [Fri, 23 Jan 2026 20:53:56 +0000 (12:53 -0800)]
Merge tag 'block-6.19-20260122' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- A set of selftest fixes for ublk
- Fix for a pid mismatch in ublk, comparing PIDs in different
namespaces if run inside a namespace
- Fix for a regression added in this release with polling, where the
nvme tcp connect code would spin forever
- Zoned device error path fix
- Tweak the blkzoned uapi additions from this kernel release, making
them more easily discoverable
- Fix for a regression in bcache with bio endio handling added in this
release
* tag 'block-6.19-20260122' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
bcache: use bio cloning for detached device requests
blk-mq: use BLK_POLL_ONESHOT for synchronous poll completion
selftests/ublk: fix garbage output in foreground mode
selftests/ublk: fix error handling for starting device
selftests/ublk: fix IO thread idle check
block: make the new blkzoned UAPI constants discoverable
ublk: fix ublksrv pid handling for pid namespaces
block: Fix an error path in disk_update_zone_resources()
Linus Torvalds [Fri, 23 Jan 2026 20:51:00 +0000 (12:51 -0800)]
Merge tag 'io_uring-6.19-20260122' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix for a potential leak of an iovec, if a specific cleanup path is
used and the rw_cache is full at the time of the call
- Fix for a regression added in this cycle, where waitid should be
using prober release/acquire semantics for updating the wait queue
head
- Check for the cancelation bit being set for every work item processed
by io-wq, not just at the start of the loop. Has no real practical
implications other than to shut up syzbot doing crazy things that
grossly overload a system, hence slowing down ring exit
- A few selftest additions, updating the mini_liburing that selftests
use
* tag 'io_uring-6.19-20260122' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
selftests/io_uring: support NO_SQARRAY in miniliburing
selftests/io_uring: add io_uring_queue_init_params
io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop
io_uring/waitid: fix KCSAN warning on io_waitid->head
io_uring/rw: free potentially allocated iovec on cache put failure
Linus Torvalds [Fri, 23 Jan 2026 20:46:12 +0000 (12:46 -0800)]
Merge tag 'iommu-fixes-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- AMD IOMMU: Fix potential NULL-ptr dereference in error path
of amd_iommu_probe_device()
- Generic IOMMUPT: Fix another compiler issue seen with older
compiler versions
- Fix signedness issue in ARM IO-PageTable code
* tag 'iommu-fixes-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/io-pgtable-arm: fix size_t signedness bug in unmap path
iommupt: Make it clearer to the compiler that pts.level == 0 for single page
iommu/amd: Fix error path in amd_iommu_probe_device()
Linus Torvalds [Fri, 23 Jan 2026 18:20:28 +0000 (10:20 -0800)]
Merge tag 'spi-fix-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"One new device ID, plus a few fixes.
The most substantial of the fixes is for the Cadence driver which in
at least some instantiations requires transmit data to drive data
through the IP"
* tag 'spi-fix-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: intel-pci: Add support for Nova Lake SPI serial flash
spi: spi-cadence: enable SPI_CONTROLLER_MUST_TX
spi: hisi-kunpeng: Fixed the wrong debugfs node name in hisi_spi debugfs initialization
spi: spi-sprd-adi: Fix double free in probe error path
Linus Torvalds [Fri, 23 Jan 2026 18:17:06 +0000 (10:17 -0800)]
Merge tag 'regmap-fix-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"A couple of small fixes, one error handling one and another for misuse
of the hwspinlock API"
* tag 'regmap-fix-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix race condition in hwspinlock irqsave routine
regmap: maple: free entry on mas_store_gfp() failure
Linus Torvalds [Fri, 23 Jan 2026 18:14:52 +0000 (10:14 -0800)]
Merge tag 'gpio-fixes-for-v6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Some fixes to resource leaks in the character device handling and
another small fix for shared GPIO management:
- fix resource leaks in error paths in GPIO character device code
- return -ENOMEM and not -ENODEV on memory allocation failure
- fix an audio issue on Qualcomm platforms due to configuration not
being propagated to pinctrl from shared GPIO proxy"
* tag 'gpio-fixes-for-v6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: shared: propagate configuration to pinctrl
gpio: cdev: Fix resource leaks on errors in gpiolib_cdev_register()
gpio: cdev: Fix resource leaks on errors in lineinfo_changed_notify()
gpio: cdev: Correct return code on memory allocation failure
Zhaoyang Huang [Thu, 22 Jan 2026 11:49:25 +0000 (19:49 +0800)]
arm64: Set __nocfi on swsusp_arch_resume()
A DABT is reported[1] on an android based system when resume from hiberate.
This happens because swsusp_arch_suspend_exit() is marked with SYM_CODE_*()
and does not have a CFI hash, but swsusp_arch_resume() will attempt to
verify the CFI hash when calling a copy of swsusp_arch_suspend_exit().
Given that there's an existing requirement that the entrypoint to
swsusp_arch_suspend_exit() is the first byte of the .hibernate_exit.text
section, we cannot fix this by marking swsusp_arch_suspend_exit() with
SYM_FUNC_*(). The simplest fix for now is to disable the CFI check in
swsusp_arch_resume().
Mark swsusp_arch_resume() as __nocfi to disable the CFI check.
Linus Torvalds [Fri, 23 Jan 2026 17:37:35 +0000 (09:37 -0800)]
Merge tag 'sound-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of a few more small fixes for HD- and USB-audio,
including a regression fix for the OOB fix that was included
in the previous pull request"
* tag 'sound-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: ALC269 fixup for Lenovo Yoga Book 9i 13IRU8 audio
ALSA: hda/realtek: Add quirk for Samsung 730QED to fix headphone
ALSA: usb-audio: Use the right limit for PCM OOB check
ALSA: usb-audio: Fix use-after-free in snd_usb_mixer_free()
ALSA: hda/realtek: Fix headset mic for TongFang X6AR55xU
ALSA: ctxfi: Fix potential OOB access in audio mixer handling
selftests: ALSA: Remove unused variable in utimer-test
ALSA: usb-audio: Add delay quirk for MOONDROP Moonriver2 Ti
ALSA: scarlett2: Fix buffer overflow in config retrieval
ALSA: usb: Increase volume range that triggers a warning
Linus Torvalds [Fri, 23 Jan 2026 17:01:26 +0000 (09:01 -0800)]
Merge tag 'drm-fixes-2026-01-23' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Probably a good thing you decided to do an rc8 in this round. Nothing
stands out, but xe/amdgpu and mediatek all have a bunch of fixes, and
then there are a few other single patches. Hopefully next week is
calmer for release.
xe:
- Disallow bind-queue sharing across multiple VMs
- Fix xe userptr in the absence of CONFIG_DEVICE_PRIVATE
- Fix a missed page count update
- Fix a confused argument to alloc_workqueue()
- Kernel-doc fixes
- Disable a workaround on VFs
- Fix a job lock assert
- Update wedged.mode only after successful reset policy change
- Select CONFIG_DEVICE_PRIVATE when DRM_XE_GPUSVM is selected
amdgpu:
- fix color pipeline string leak
- GC 12 fix
- Misc error path fixes
- DC analog fix
- SMU 6 fixes
- TLB flush fix
- DC idle optimization fix
amdkfd:
- GC 11 cooperative launch fix
imagination:
- sync wait for logtype update completion to ensure FW trace
is available
bridge/synopsis:
- Fix error paths in dw_dp_bind
nouveau:
- Add and implement missing DSB connector types, and improve
unknown connector handling
- Set missing atomic function ops
intel:
- place 3D lut at correct place in pipeline
- fix color pipeline string leak
vkms:
- fix color pipeline string leak
mediatek:
- Fix platform_get_irq() error checking
- HDMI DDC v2 driver fixes
- dpi: Find next bridge during probe
- mtk_gem: Partial refactor and use drm_gem_dma_object
- dt-bindings: Fix typo 'hardwares' to 'hardware'"
* tag 'drm-fixes-2026-01-23' of https://gitlab.freedesktop.org/drm/kernel: (38 commits)
Revert "drm/amd/display: pause the workload setting in dm"
drm/xe: Select CONFIG_DEVICE_PRIVATE when DRM_XE_GPUSVM is selected
drm, drm/xe: Fix xe userptr in the absence of CONFIG_DEVICE_PRIVATE
drm/i915/display: Fix color pipeline enum name leak
drm/vkms: Fix color pipeline enum name leak
drm/amd/display: Fix color pipeline enum name leak
drm/i915/color: Place 3D LUT after CSC in plane color pipeline
drm/nouveau/disp: Set drm_mode_config_funcs.atomic_(check|commit)
drm/nouveau: implement missing DCB connector types; gracefully handle unknown connectors
drm/nouveau: add missing DCB connector types
drm/amdgpu: fix type for wptr in ring backup
drm/amdgpu: Fix validating flush_gpu_tlb_pasid()
drm/amd/pm: Workaround SI powertune issue on Radeon 430 (v2)
drm/amd/pm: Don't clear SI SMC table when setting power limit
drm/amd/pm: Fix si_dpm mmCG_THERMAL_INT setting
drm/xe: Update wedged.mode only after successful reset policy change
drm/xe/migrate: fix job lock assert
drm/xe/uapi: disallow bind queue sharing
drm/amd/display: Only poll analog connectors
drm/amdgpu: fix error handling in ib_schedule()
...
Linus Torvalds [Fri, 23 Jan 2026 03:39:25 +0000 (19:39 -0800)]
Merge tag 'v6.19-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
- Add assoclen check in authencesn
* tag 'v6.19-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: authencesn - reject too-short AAD (assoclen<8) to match ESP/ESN spec
Cedric Xing [Fri, 23 Jan 2026 00:39:15 +0000 (18:39 -0600)]
x86: make page fault handling disable interrupts properly
There's a big comment in the x86 do_page_fault() about our interrupt
disabling code:
* User address page fault handling might have reenabled
* interrupts. Fixing up all potential exit points of
* do_user_addr_fault() and its leaf functions is just not
* doable w/o creating an unholy mess or turning the code
* upside down.
but it turns out that comment is subtly wrong, and the code as a result
is also wrong.
Because it's certainly true that we may have re-enabled interrupts when
handling user page faults. And it's most certainly true that we don't
want to bother fixing up all the cases.
But what isn't true is that it's limited to user address page faults.
The confusion stems from the fact that we have logic here that depends
on the address range of the access, but other code then depends on the
_context_ the access was done in. The two are not related, even though
both of them are about user-vs-kernel.
In other words, both user and kernel addresses can cause interrupts to
have been enabled (eg when __bad_area_nosemaphore() gets called for user
accesses to kernel addresses). As a result we should make sure to
disable interrupts again regardless of the address range before
returning to the low-level fault handling code.
The __bad_area_nosemaphore() code actually did disable interrupts again
after enabling them, just not consistently. Ironically, as noted in the
original comment, fixing up all the cases is just not worth it, when the
simple solution is to just do it unconditionally in one single place.
So remove the incomplete case that unsuccessfully tried to do what the
comment said was "not doable" in commit ca4c6a9858c2 ("x86/traps: Make
interrupt enable/disable symmetric in C code"), and just make it do the
simple and straightforward thing.
Signed-off-by: Cedric Xing <cedric.xing@intel.com> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Fixes: ca4c6a9858c2 ("x86/traps: Make interrupt enable/disable symmetric in C code") Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
smb: server: reset smb_direct_port = SMB_DIRECT_PORT_INFINIBAND on init
This allows testing with different devices (iwrap vs. non-iwarp) without
'rmmod ksmbd && modprobe ksmbd', but instead
'ksmbd.control -s && ksmbd.mountd' is enough.
In the long run we want to listen on iwarp and non-iwarp at the same time,
but requires more changes, most likely also in the rdma layer.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: fix comment for ksmbd_vfs_kern_path_start_removing()
This was found by sparse...
Fixes: 1ead2213dd7d ("smb/server: use end_removing_noperm for for target of smb2_create_link()") Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: NeilBrown <neil@brown.name> Cc: Christian Brauner <brauner@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Thomas Fourier [Fri, 9 Jan 2026 10:38:39 +0000 (11:38 +0100)]
ksmbd: smbd: fix dma_unmap_sg() nents
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Dave Airlie [Thu, 22 Jan 2026 21:51:30 +0000 (07:51 +1000)]
Merge tag 'drm-misc-fixes-2026-01-22' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-msic-fixes for v6.19:
imagination:
- sync wait for logtype update completion to ensure FW trace is
available
bridge/synopsis:
- Fix error paths in dw_dp_bind
nouveau:
- Add and implement missing DSB connector types, and improve unknown
connector handling.
- Set missing atomic function ops.
intel/display, amd, vkms:
- (intel) Place 3D lut at correct place in colorops pipeline.
- (all) Fix a leak during device init where strings were leaked.
Linus Torvalds [Thu, 22 Jan 2026 17:32:11 +0000 (09:32 -0800)]
Merge tag 'net-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN and wireless.
Pretty big, but hard to make up any cohesive story that would explain
it, a random collection of fixes. The two reverts of bad patches from
this release here feel like stuff that'd normally show up by rc5 or
rc6. Perhaps obvious thing to say, given the holiday timing.
That said, no active investigations / regressions. Let's see what the
next week brings.
Current release - fix to a fix:
- can: alloc_candev_mqs(): add missing default CAN capabilities
Current release - regressions:
- usbnet: fix crash due to missing BQL accounting after resume
The workload profile needs to be in the default state when
the dc idle optimizaion state is entered. However, when
jobs come in for video or GFX or compute, the profile may
be set to a non-default profile resulting in the dc idle
optimizations not taking affect and resulting in higher
power usage. As such we need to pause the workload profile
changes during this transition. When this patch was originally
committed, it caused a regression with a Dell U3224KB display,
but no other problems were reported at the time. When it
was reapplied (this patch) to address increased power usage, it
seems to have caused additional regressions. This change seems
to have a number of side affects (audio issues, stuttering,
etc.). I suspect the pause should only happen when all displays
are off or in static screen mode, but I think this call site
gets called more often than that which results in idle state
entry more often than intended. For now revert.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4894 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4717 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4725 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4517 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4806 Cc: Yang Wang <kevinyang.wang@amd.com> Cc: Kenneth Feng <kenneth.feng@amd.com> Cc: Roman Li <Roman.Li@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1412482b714358ffa30d38fd3dd0b05795163648)
Ilpo Järvinen [Wed, 21 Jan 2026 13:14:17 +0000 (15:14 +0200)]
PCI: Fix Resizable BAR restore order
The commit 337b1b566db0 ("PCI: Fix restoring BARs on BAR resize rollback
path") changed BAR resize to layer rebar code and resource setup/restore
code cleanly. Unfortunately, it did not consider how the value of the BAR
Size field impacts the read-only bits in the Base Address Register (PCIe7
spec, sec. 7.8.6.3). That is, it very much matters in which order the BAR
Size and Base Address Register are restored.
Post-337b1b566db0 ("PCI: Fix restoring BARs on BAR resize rollback path")
during BAR resize rollback, pci_do_resource_release_and_resize() attempts
to restore the old address to the BAR that was resized, but it can fail to
setup the address correctly if the address has low bits set that collide
with the bits that are still read-only. As a result, kernel's resource and
BAR will be out-of-sync.
Fix this by restoring BAR Size before rolling back the resource changes and
restoring the BAR.
Ilpo Järvinen [Wed, 21 Jan 2026 13:14:16 +0000 (15:14 +0200)]
PCI: Fix BAR resize rollback path overwriting ret
The commit 337b1b566db0 ("PCI: Fix restoring BARs on BAR resize rollback
path") added BAR rollback to pci_do_resource_release_and_resize() in case
of resize failure.
On the rollback, pci_claim_resource() is called, which can fail and the
code is prepared for that possibility. pci_claim_resource()'s return value,
however, overwrites the original value of ret so
pci_do_resource_release_and_resize() will return an incorrect value in the
end (as pci_claim_resource() normally succeeds, in practice ret will be 0).
Fix the issue by directly calling pci_claim_resource() inside the if ().
Hariprasad Kelam [Wed, 21 Jan 2026 09:48:19 +0000 (15:18 +0530)]
Octeontx2-af: Add proper checks for fwdata
firmware populates MAC address, link modes (supported, advertised)
and EEPROM data in shared firmware structure which kernel access
via MAC block(CGX/RPM).
Accessing fwdata, on boards booted with out MAC block leading to
kernel panics.
Fixes: 997814491cee ("Octeontx2-af: Fetch MAC channel info from firmware") Fixes: 5f21226b79fd ("Octeontx2-pf: ethtool: support multi advertise mode") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Link: https://patch.msgid.link/20260121094819.2566786-1-hkelam@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ivan Vecera [Wed, 21 Jan 2026 13:00:11 +0000 (14:00 +0100)]
dpll: Prevent duplicate registrations
Modify the internal registration helpers dpll_xa_ref_{dpll,pin}_add()
to reject duplicate registration attempts.
Previously, if a caller attempted to register the same pin multiple
times (with the same ops, priv, and cookie) on the same device, the core
silently increments the reference count and return success. This behavior
is incorrect because if the caller makes these duplicate registrations
then for the first one dpll_pin_registration is allocated and for others
the associated dpll_pin_ref.refcount is incremented. During the first
unregistration the associated dpll_pin_registration is freed and for
others WARN is fired.
Fix this by updating the logic to return `-EEXIST` if a matching
registration is found to enforce a strict "register once" policy.
Fixes: 9431063ad323 ("dpll: core: Add DPLL framework base functions") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20260121130012.112606-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Incorrectly transmitted interrupt number instead of queue number
when using netif_queue_set_napi. Besides, move this to appropriate
code location to set napi.
Remove redundant netif_stop_subqueue beacuase it is not part of the
hinic3_send_one_skb process.
Jakub Kicinski [Thu, 22 Jan 2026 15:54:30 +0000 (07:54 -0800)]
Merge tag 'wireless-2026-11-22' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Another set of updates:
- various small fixes for ath10k/ath12k/mwifiex/rsi
- cfg80211 fix for HE bitrate overflow
- mac80211 fixes
- S1G beacon handling in scan
- skb tailroom handling for HW encryption
- CSA fix for multi-link
- handling of disabled links during association
* tag 'wireless-2026-11-22' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211: ignore link disabled flag from userspace
wifi: mac80211: apply advertised TTLM from association response
wifi: mac80211: parse all TTLM entries
wifi: mac80211: don't increment crypto_tx_tailroom_needed_cnt twice
wifi: mac80211: don't perform DA check on S1G beacon
wifi: ath12k: Fix wrong P2P device link id issue
wifi: ath12k: fix dead lock while flushing management frames
wifi: ath12k: Fix scan state stuck in ABORTING after cancel_remain_on_channel
wifi: ath12k: cancel scan only on active scan vdev
wifi: mwifiex: Fix a loop in mwifiex_update_ampdu_rxwinsize()
wifi: mac80211: correctly check if CSA is active
wifi: cfg80211: Fix bitrate calculation overflow for HE rates
wifi: rsi: Fix memory corruption due to not set vif driver data size
wifi: ath12k: don't force radio frequency check in freq_to_idx()
wifi: ath12k: fix dma_free_coherent() pointer
wifi: ath10k: fix dma_free_coherent() pointer
====================
The original series was posted by Melbin K Mathew <mlbnkm1@gmail.com> till v4.
Since it's a real issue and the original author seems busy, I'm sending
the new version fixing my comments but keeping the authorship (and restoring
mine on patch 2 as reported on v4).
This series fixes TX credit handling in virtio-vsock:
Patch 1: Fix potential underflow in get_credit() using s64 arithmetic
Patch 2: Fix vsock_test seqpacket bounds test
Patch 3: Cap TX credit to local buffer size (security hardening)
Patch 4: Add stream TX credit bounds regression test
The core issue is that a malicious guest can advertise a huge buffer
size via SO_VM_SOCKETS_BUFFER_SIZE, causing the host to allocate
excessive sk_buff memory when sending data to that guest.
On an unpatched Ubuntu 22.04 host (~64 GiB RAM), running a PoC with
32 guest vsock connections advertising 2 GiB each and reading slowly
drove Slab/SUnreclaim from ~0.5 GiB to ~57 GiB; the system only
recovered after killing the QEMU process.
With this series applied, the same PoC shows only ~35 MiB increase in
Slab/SUnreclaim, no host OOM, and the guest remains responsive.
====================
Melbin K Mathew [Wed, 21 Jan 2026 09:36:28 +0000 (10:36 +0100)]
vsock/test: add stream TX credit bounds test
Add a regression test for the TX credit bounds fix. The test verifies
that a sender with a small local buffer size cannot queue excessive
data even when the peer advertises a large receive buffer.
The client:
- Sets a small buffer size (64 KiB)
- Connects to server (which advertises 2 MiB buffer)
- Sends in non-blocking mode until EAGAIN
- Verifies total queued data is bounded
This guards against the original vulnerability where a remote peer
could cause unbounded kernel memory allocation by advertising a large
buffer and reading slowly.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Melbin K Mathew <mlbnkm1@gmail.com>
[Stefano: use sock_buf_size to check the bytes sent + small fixes] Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20260121093628.9941-5-sgarzare@redhat.com Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Melbin K Mathew [Wed, 21 Jan 2026 09:36:27 +0000 (10:36 +0100)]
vsock/virtio: cap TX credit to local buffer size
The virtio transports derives its TX credit directly from peer_buf_alloc,
which is set from the remote endpoint's SO_VM_SOCKETS_BUFFER_SIZE value.
On the host side this means that the amount of data we are willing to
queue for a connection is scaled by a guest-chosen buffer size, rather
than the host's own vsock configuration. A malicious guest can advertise
a large buffer and read slowly, causing the host to allocate a
correspondingly large amount of sk_buff memory.
The same thing would happen in the guest with a malicious host, since
virtio transports share the same code base.
Introduce a small helper, virtio_transport_tx_buf_size(), that
returns min(peer_buf_alloc, buf_alloc), and use it wherever we consume
peer_buf_alloc.
This ensures the effective TX window is bounded by both the peer's
advertised buffer and our own buf_alloc (already clamped to
buffer_max_size via SO_VM_SOCKETS_BUFFER_MAX_SIZE), so a remote peer
cannot force the other to queue more data than allowed by its own
vsock settings.
On an unpatched Ubuntu 22.04 host (~64 GiB RAM), running a PoC with
32 guest vsock connections advertising 2 GiB each and reading slowly
drove Slab/SUnreclaim from ~0.5 GiB to ~57 GiB; the system only
recovered after killing the QEMU process. That said, if QEMU memory is
limited with cgroups, the maximum memory used will be limited.
Only ~35 MiB increase in Slab/SUnreclaim, no host OOM, and the guest
remains responsive.
Compatibility with non-virtio transports:
- VMCI uses the AF_VSOCK buffer knobs to size its queue pairs per
socket based on the local vsk->buffer_* values; the remote side
cannot enlarge those queues beyond what the local endpoint
configured.
- Hyper-V's vsock transport uses fixed-size VMBus ring buffers and
an MTU bound; there is no peer-controlled credit field comparable
to peer_buf_alloc, and the remote endpoint cannot drive in-flight
kernel memory above those ring sizes.
- The loopback path reuses virtio_transport_common.c, so it
naturally follows the same semantics as the virtio transport.
This change is limited to virtio_transport_common.c and thus affects
virtio-vsock, vhost-vsock, and loopback, bringing them in line with the
"remote window intersected with local policy" behaviour that VMCI and
Hyper-V already effectively have.
Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko") Suggested-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Melbin K Mathew <mlbnkm1@gmail.com>
[Stefano: small adjustments after changing the previous patch]
[Stefano: tweak the commit message] Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Link: https://patch.msgid.link/20260121093628.9941-4-sgarzare@redhat.com Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The test requires the sender (client) to send all messages before waking
up the receiver (server).
Since virtio-vsock had a bug and did not respect the size of the TX
buffer, this test worked, but now that we are going to fix the bug, the
test hangs because the sender would fill the TX buffer before waking up
the receiver.
Set the buffer size in the sender (client) as well, as we already do for
the receiver (server).
Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20260121093628.9941-3-sgarzare@redhat.com Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Melbin K Mathew [Wed, 21 Jan 2026 09:36:25 +0000 (10:36 +0100)]
vsock/virtio: fix potential underflow in virtio_transport_get_credit()
The credit calculation in virtio_transport_get_credit() uses unsigned
arithmetic:
ret = vvs->peer_buf_alloc - (vvs->tx_cnt - vvs->peer_fwd_cnt);
If the peer shrinks its advertised buffer (peer_buf_alloc) while bytes
are in flight, the subtraction can underflow and produce a large
positive value, potentially allowing more data to be queued than the
peer can handle.
Reuse virtio_transport_has_space() which already handles this case and
add a comment to make it clear why we are doing that.
Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko") Suggested-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Melbin K Mathew <mlbnkm1@gmail.com>
[Stefano: use virtio_transport_has_space() instead of duplicating the code]
[Stefano: tweak the commit message] Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Link: https://patch.msgid.link/20260121093628.9941-2-sgarzare@redhat.com Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Shida Zhang [Thu, 22 Jan 2026 06:13:21 +0000 (14:13 +0800)]
bcache: use bio cloning for detached device requests
Previously, bcache hijacked the bi_end_io and bi_private fields of
the incoming bio when the backing device was in a detached state.
This is fragile and breaks if the bio is needed to be processed by
other layers.
This patch transitions to using a cloned bio embedded within a private
structure. This ensures the original bio's metadata remains untouched.
Fixes: 53280e398471 ("bcache: fix improper use of bi_end_io") Co-developed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Shida Zhang <zhangshida@kylinos.cn> Acked-by: Coly Li <colyli@fnnas.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Thu, 22 Jan 2026 04:28:58 +0000 (12:28 +0800)]
blk-mq: use BLK_POLL_ONESHOT for synchronous poll completion
blk_execute_rq() with polling is used in kernel code paths such as
NVMe controller connect. The aggressive spinning in blk_hctx_poll()
can prevent the completion task from getting a chance to run, causing
a lockup.
The spinning with cpu_relax() doesn't yield CPU, so need_resched()
only becomes true on timer tick. This causes unnecessary spinning
while the completion task is already waiting to run.
Before commit f22ecf9c14c1, the loop would exit early because
task_is_running() was always true. After that commit removed the
check, the loop now spins until need_resched().
Fix this by using BLK_POLL_ONESHOT in blk_rq_poll_completion(). This
causes blk_hctx_poll() to poll once and return immediately, letting
the outer loop's cond_resched() yield CPU so the completion task can
run.
Fixes: f22ecf9c14c1 ("blk-mq: delete task running check in blk_hctx_poll()") Cc: Diangang Li <lidiangang@bytedance.com> Cc: Fengnan Chang <changfengnan@bytedance.com> Reported-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
s390/boot/vmlinux.lds.S: Ensure bzImage ends with SecureBoot trailer
Since commit 3e86e4d74c04 ("kbuild: keep .modinfo section in
vmlinux.unstripped") the .modinfo section which has SHF_ALLOC ends up
in bzImage after the SecureBoot trailer. This breaks SecureBoot because
the bootloader can no longer find the SecureBoot trailer with kernel's
signature at the expected location in bzImage. To fix the bug,
move discarded sections before the ELF_DETAILS macro and discard
the .modinfo section which is not needed by the decompressor.
Martin Hamilton [Thu, 22 Jan 2026 02:51:18 +0000 (02:51 +0000)]
ALSA: hda/realtek: ALC269 fixup for Lenovo Yoga Book 9i 13IRU8 audio
The amp/speakers on the Lenovo Yoga Book 9i 13IRU8 laptop aren't
fully powered up, resulting in horrible tinny sound by default.
The kernel has an existing quirk for PCI SSID 0x17aa3843 which
matches this machine and several others. The quirk applies the
ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP fixup, however the fixup does not
work on this machine.
This patch modifies the existing quirk by adding a check for the
subsystem ID 0x17aa3881. If present, ALC287_FIXUP_TAS2781_I2C will
be applied instead of ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP. With this
change the TAS2781 amp is powered up, firmware is downloaded and
recognised by HDA/SOF - i.e. all is good, and we can boogie.
Code is re-used from alc298_fixup_lenovo_c940_duet7(), which fixes a
similar problem with two other Lenovo laptops.
Cross checked against ALSA cardinfo database for potential clashes.
Tested against 6.18.5 kernel built with Arch Linux default options.
Tested in HDA mode and SOF mode.
Note: Possible further work required to address quality of life issues
caused by the firmware's agressive power saving, and to improve ALSA
control mappings.
Huan He [Wed, 14 Jan 2026 12:22:56 +0000 (20:22 +0800)]
mmc: sdhci-of-dwcmshc: Fix DMA 128MB boundary for Eswin EIC7700
This DWC MSHC has a 128MB limitation where the data buffer size and start
address must not exceed the 128MB boundary. Registering the missing
'adma_write_desc' callback function.
Signed-off-by: Huan He <hehuan1@eswincomputing.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 32b2633219d3 ("mmc: sdhci-of-dwcmshc: Add support for Eswin EIC7700") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Clemens Gruber [Wed, 21 Jan 2026 08:37:51 +0000 (09:37 +0100)]
net: fec: account for VLAN header in frame length calculations
The MAX_FL (maximum frame length) and related calculations used ETH_HLEN,
which does not account for the 4-byte VLAN tag in tagged frames. This
caused the hardware to reject valid VLAN frames as oversized, resulting
in RX errors and dropped packets.
Use VLAN_ETH_HLEN instead of ETH_HLEN in the MAX_FL register setup,
cut-through mode threshold, buffer allocation, and max_mtu calculation.
Cc: stable@kernel.org # v6.18+ Fixes: 62b5bb7be7bc ("net: fec: update MAX_FL based on the current MTU") Fixes: d466c16026e9 ("net: fec: enable the Jumbo frame support for i.MX8QM") Fixes: 59e9bf037d75 ("net: fec: add change_mtu to support dynamic buffer allocation") Fixes: ec2a1681ed4f ("net: fec: use a member variable for maximum buffer size") Signed-off-by: Clemens Gruber <mail@clemensgruber.at> Reviewed-by: Wei Fang <wei.fang@nxp.com> Link: https://patch.msgid.link/20260121083751.66997-1-mail@clemensgruber.at Signed-off-by: Paolo Abeni <pabeni@redhat.com>
David Yang [Wed, 21 Jan 2026 07:29:26 +0000 (15:29 +0800)]
net: openvswitch: fix data race in ovs_vport_get_upcall_stats
In ovs_vport_get_upcall_stats(), some statistics protected by
u64_stats_sync, are read and accumulated in ignorance of possible
u64_stats_fetch_retry() events. These statistics are already accumulated
by u64_stats_inc(). Fix this by reading them into temporary variables
first.
Fixes: 1933ea365aa7 ("net: openvswitch: Add support to count upcall packets") Signed-off-by: David Yang <mmyangfl@gmail.com> Acked-by: Ilya Maximets <i.maximets@ovn.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Aaron Conole <aconole@redhat.com> Link: https://patch.msgid.link/20260121072932.2360971-1-mmyangfl@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Thomas Hellström [Wed, 21 Jan 2026 09:10:48 +0000 (10:10 +0100)]
drm/xe: Select CONFIG_DEVICE_PRIVATE when DRM_XE_GPUSVM is selected
CONFIG_DEVICE_PRIVATE is a prerequisite for DRM_XE_GPUSVM.
Explicitly select it so that DRM_XE_GPUSVM is not unintentionally
left out from distro configs not explicitly enabling
CONFIG_DEVICE_PRIVATE.
v2:
- Select also CONFIG_ZONE_DEVICE since it's needed by
CONFIG_DEVICE_PRIVATE.
v3:
- Depend on CONFIG_ZONE_DEVICE rather than selecting it.
Cc: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: <dri-devel@lists.freedesktop.org> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patch.msgid.link/20260121091048.41371-3-thomas.hellstrom@linux.intel.com
(cherry picked from commit 9386f49316074d2d76fd78d6bd359996de42fb7f) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Mark Rutland [Tue, 20 Jan 2026 14:51:07 +0000 (14:51 +0000)]
arm64/fpsimd: signal: Fix restoration of SVE context
When SME is supported, Restoring SVE signal context can go wrong in a
few ways, including placing the task into an invalid state where the
kernel may read from out-of-bounds memory (and may potentially take a
fatal fault) and/or may kill the task with a SIGKILL.
(1) Restoring a context with SVE_SIG_FLAG_SM set can place the task into
an invalid state where SVCR.SM is set (and sve_state is non-NULL)
but TIF_SME is clear, consequently resuting in out-of-bounds memory
reads and/or killing the task with SIGKILL.
This can only occur in unusual (but legitimate) cases where the SVE
signal context has either been modified by userspace or was saved in
the context of another task (e.g. as with CRIU), as otherwise the
presence of an SVE signal context with SVE_SIG_FLAG_SM implies that
TIF_SME is already set.
While in this state, task_fpsimd_load() will NOT configure SMCR_ELx
(leaving some arbitrary value configured in hardware) before
restoring SVCR and attempting to restore the streaming mode SVE
registers from memory via sve_load_state(). As the value of
SMCR_ELx.LEN may be larger than the task's streaming SVE vector
length, this may read memory outside of the task's allocated
sve_state, reading unrelated data and/or triggering a fault.
While this can result in secrets being loaded into streaming SVE
registers, these values are never exposed. As TIF_SME is clear,
fpsimd_bind_task_to_cpu() will configure CPACR_ELx.SMEN to trap EL0
accesses to streaming mode SVE registers, so these cannot be
accessed directly at EL0. As fpsimd_save_user_state() verifies the
live vector length before saving (S)SVE state to memory, no secret
values can be saved back to memory (and hence cannot be observed via
ptrace, signals, etc).
When the live vector length doesn't match the expected vector length
for the task, fpsimd_save_user_state() will send a fatal SIGKILL
signal to the task. Hence the task may be killed after executing
userspace for some period of time.
(2) Restoring a context with SVE_SIG_FLAG_SM clear does not clear the
task's SVCR.SM. If SVCR.SM was set prior to restoring the context,
then the task will be left in streaming mode unexpectedly, and some
register state will be combined inconsistently, though the task will
be left in legitimate state from the kernel's PoV.
This can only occur in unusual (but legitimate) cases where ptrace
has been used to set SVCR.SM after entry to the sigreturn syscall,
as syscall entry clears SVCR.SM.
In these cases, the the provided SVE register data will be loaded
into the task's sve_state using the non-streaming SVE vector length
and the FPSIMD registers will be merged into this using the
streaming SVE vector length.
Fix (1) by setting TIF_SME when setting SVCR.SM. This also requires
ensuring that the task's sme_state has been allocated, but as this could
contain live ZA state, it should not be zeroed. Fix (2) by clearing
SVCR.SM when restoring a SVE signal context with SVE_SIG_FLAG_SM clear.
For consistency, I've pulled the manipulation of SVCR, TIF_SVE, TIF_SME,
and fp_type earlier, immediately after the allocation of
sve_state/sme_state, before the restore of the actual register state.
This makes it easier to ensure that these are always modified
consistently, even if a fault is taken while reading the register data
from the signal context. I do not expect any software to depend on the
exact state restored when a fault is taken while reading the context.
Fixes: 85ed24dad290 ("arm64/sme: Implement streaming SVE signal handling") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: <stable@vger.kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Will Deacon <will@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mark Rutland [Tue, 20 Jan 2026 14:51:06 +0000 (14:51 +0000)]
arm64/fpsimd: signal: Allocate SSVE storage when restoring ZA
The code to restore a ZA context doesn't attempt to allocate the task's
sve_state before setting TIF_SME. Consequently, restoring a ZA context
can place a task into an invalid state where TIF_SME is set but the
task's sve_state is NULL.
In legitimate but uncommon cases where the ZA signal context was NOT
created by the kernel in the context of the same task (e.g. if the task
is saved/restored with something like CRIU), we have no guarantee that
sve_state had been allocated previously. In these cases, userspace can
enter streaming mode without trapping while sve_state is NULL, causing a
later NULL pointer dereference when the kernel attempts to store the
register state:
Fix this by having restore_za_context() ensure that the task's sve_state
is allocated, matching what we do when taking an SME trap. Any live
SVE/SSVE state (which is restored earlier from a separate signal
context) must be preserved, and hence this is not zeroed.
Fixes: 39782210eb7e ("arm64/sme: Implement ZA signal handling") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: <stable@vger.kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Will Deacon <will@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mark Rutland [Tue, 20 Jan 2026 14:51:05 +0000 (14:51 +0000)]
arm64/fpsimd: ptrace: Fix SVE writes on !SME systems
When SVE is supported but SME is not supported, a ptrace write to the
NT_ARM_SVE regset can place the tracee into an invalid state where
(non-streaming) SVE register data is stored in FP_STATE_SVE format but
TIF_SVE is clear. This can result in a later warning from
fpsimd_restore_current_state(), e.g.
WARNING: CPU: 0 PID: 7214 at arch/arm64/kernel/fpsimd.c:383 fpsimd_restore_current_state+0x50c/0x748
When this happens, fpsimd_restore_current_state() will set TIF_SVE,
placing the task into the correct state. This occurs before any other
check of TIF_SVE can possibly occur, as other checks of TIF_SVE only
happen while the FPSIMD/SVE/SME state is live. Thus, aside from the
warning, there is no functional issue.
This bug was introduced during rework to error handling in commit:
... where the setting of TIF_SVE was moved into a block which is only
executed when system_supports_sme() is true.
Fix this by removing the system_supports_sme() check. This ensures that
TIF_SVE is set for (SVE-formatted) writes to NT_ARM_SVE, at the cost of
unconditionally manipulating the tracee's saved svcr value. The
manipulation of svcr is benign and inexpensive, and we already do
similar elsewhere (e.g. during signal handling), so I don't think it's
worth guarding this with system_supports_sme() checks.
Aside from the above, there is no functional change. The 'type' argument
to sve_set_common() is only set to ARM64_VEC_SME (in ssve_set())) when
system_supports_sme(), so the ARM64_VEC_SME case in the switch statement
is still unreachable when !system_supports_sme(). When
CONFIG_ARM64_SME=n, the only caller of sve_set_common() is sve_set(),
and the compiler can constant-fold for the case where type is
ARM64_VEC_SVE, removing the logic for other cases.
Reported-by: syzbot+d4ab35af21e99d07ce67@syzkaller.appspotmail.com Fixes: 9f8bf718f292 ("arm64/fpsimd: ptrace: Gracefully handle errors") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: <stable@vger.kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Will Deacon <will@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Thomas Hellström [Wed, 21 Jan 2026 09:10:47 +0000 (10:10 +0100)]
drm, drm/xe: Fix xe userptr in the absence of CONFIG_DEVICE_PRIVATE
CONFIG_DEVICE_PRIVATE is not selected by default by some distros,
for example Fedora, and that leads to a regression in the xe driver
since userptr support gets compiled out.
It turns out that DRM_GPUSVM, which is needed for xe userptr support
compiles also without CONFIG_DEVICE_PRIVATE, but doesn't compile
without CONFIG_ZONE_DEVICE.
Exclude the drm_pagemap files from compilation with !CONFIG_ZONE_DEVICE,
and remove the CONFIG_DEVICE_PRIVATE dependency from CONFIG_DRM_GPUSVM and
the xe driver's selection of it, re-enabling xe userptr for those configs.
v2:
- Don't compile the drm_pagemap files unless CONFIG_ZONE_DEVICE is set.
- Adjust the drm_pagemap.h header accordingly.
Fixes: 9e9787414882 ("drm/xe/userptr: replace xe_hmm with gpusvm") Cc: Matthew Auld <matthew.auld@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.18+ Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patch.msgid.link/20260121091048.41371-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit 1e372b246199ca7a35f930177fea91b557dac16e) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
drm/i915/display: Fix color pipeline enum name leak
intel_color_pipeline_plane_init() allocates enum names for color
pipelines, which are copied by drm_property_create_enum(). The temporary
strings were not freed, resulting in a memory leak.
Allocate enum names only after successful pipeline construction and free
them on all exit paths.
Fixes: ef105316819d ("drm/i915/color: Create a transfer function color pipeline") Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Maarten Lankhorst <dev@lankhorst.se> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patch.msgid.link/20260113102303.724205-5-chaitanya.kumar.borah@intel.com
vkms_initialize_colorops() allocates enum names for color pipelines,
which are copied by drm_property_create_enum(). The temporary strings
were not freed, resulting in a memory leak.
Allocate enum names only after successful pipeline construction and
free them on all exit paths
drm/amd/display: Fix color pipeline enum name leak
dm_plane_init_colorops() allocates enum names for color pipelines.
These are eventually passed to drm_property_create_enum() which create
its own copies of the string. Free the strings after initialization
is done.
Also, allocate color pipeline enum names only after successfully creating
color pipeline.
Fixes: 9ba25915efba ("drm/amd/display: Add support for sRGB EOTF in DEGAM block") Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Maarten Lankhorst <dev@lankhorst.se> Acked-by: Alex Deucher <alexander.deucher@amd.com> #irc Link: https://patch.msgid.link/20260113102303.724205-3-chaitanya.kumar.borah@intel.com
Linus Torvalds [Thu, 22 Jan 2026 05:53:26 +0000 (21:53 -0800)]
Merge tag 'hyperv-fixes-signed-20260121' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix ARM64 port of the MSHV driver (Anirudh Rayabharam)
- Fix huge page handling in the MSHV driver (Stanislav Kinsburskii)
- Minor fixes to driver code (Julia Lawall, Michael Kelley)
* tag 'hyperv-fixes-signed-20260121' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv: handle gpa intercepts for arm64
mshv: add definitions for arm64 gpa intercepts
mshv: Add __user attribute to argument passed to access_ok()
mshv: Store the result of vfs_poll in a variable of type __poll_t
mshv: Align huge page stride with guest mapping
Drivers: hv: Always do Hyper-V panic notification in hv_kmsg_dump()
Drivers: hv: vmbus: fix typo in function name reference
Ratheesh Kannoth [Wed, 21 Jan 2026 03:39:34 +0000 (09:09 +0530)]
octeontx2-af: Fix error handling
This commit adds error handling and rollback logic to
rvu_mbox_handler_attach_resources() to properly clean up partially
attached resources when rvu_attach_block() fails.
Daniel Golle [Wed, 21 Jan 2026 02:23:17 +0000 (02:23 +0000)]
net: pcs: pcs-mtk-lynxi: report in-band capability for 2500Base-X
It turns out that 2500Base-X actually works fine with in-band status on
MediaTek's LynxI PCS -- I wrongly concluded it didn't because it is
broken in all the copper SFP modules and GPON sticks I used for testing.
Hence report LINK_INBAND_ENABLE also for 2500Base-X mode.
This reverts most of commit a003c38d9bbb ("net: pcs: pcs-mtk-lynxi:
correctly report in-band status capabilities").
The removal of the QSGMII interface mode was correct and is left
untouched.
The lockless accesses to these to values aren't actually a problem as the
read only needs an approximate time of last transmission for the purposes
of deciding whether or not the transmission of a keepalive packet is
warranted yet.
Also, as ->last_tx_at is a 64-bit value, tearing can occur on a 32-bit
arch.
Fix both of these by switching to an unsigned int for ->last_tx_at and only
storing the LSW of the time64_t. It can then be reconstructed at need
provided no more than 68 years has elapsed since the last transmission.
Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: syzbot+6182afad5045e6703b3d@syzkaller.appspotmail.com Closes: https://lore.kernel.org/r/695e7cfb.050a0220.1c677c.036b.GAE@google.com/ Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org Link: https://patch.msgid.link/1107124.1768903985@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 20 Jan 2026 21:10:39 +0000 (23:10 +0200)]
net: dsa: fix off-by-one in maximum bridge ID determination
Prior to the blamed commit, the bridge_num range was from
0 to ds->max_num_bridges - 1. After the commit, it is from
1 to ds->max_num_bridges.
So this check:
if (bridge_num >= max)
return 0;
must be updated to:
if (bridge_num > max)
return 0;
in order to allow the last bridge_num value (==max) to be used.
This is easiest visible when a driver sets ds->max_num_bridges=1.
The observed behaviour is that even the first created bridge triggers
the netlink extack "Range of offloadable bridges exceeded" warning, and
is handled in software rather than being offloaded.
Eric Dumazet [Tue, 20 Jan 2026 16:17:44 +0000 (16:17 +0000)]
bonding: provide a net pointer to __skb_flow_dissect()
After 3cbf4ffba5ee ("net: plumb network namespace into __skb_flow_dissect")
we have to provide a net pointer to __skb_flow_dissect(),
either via skb->dev, skb->sk, or a user provided pointer.
In the following case, syzbot was able to cook a bare skb.
Taehee Yoo [Tue, 20 Jan 2026 13:39:30 +0000 (13:39 +0000)]
selftests: net: amt: wait longer for connection before sending packets
Both send_mcast4() and send_mcast6() use sleep 2 to wait for the tunnel
connection between the gateway and the relay, and for the listener
socket to be created in the LISTENER namespace.
However, tests sometimes fail because packets are sent before the
connection is fully established.
Increase the waiting time to make the tests more reliable, and use
wait_local_port_listen() to explicitly wait for the listener socket.
Andrey Vatoropin [Tue, 20 Jan 2026 11:37:47 +0000 (11:37 +0000)]
be2net: Fix NULL pointer dereference in be_cmd_get_mac_from_list
When the parameter pmac_id_valid argument of be_cmd_get_mac_from_list() is
set to false, the driver may request the PMAC_ID from the firmware of the
network card, and this function will store that PMAC_ID at the provided
address pmac_id. This is the contract of this function.
However, there is a location within the driver where both
pmac_id_valid == false and pmac_id == NULL are being passed. This could
result in dereferencing a NULL pointer.
To resolve this issue, it is necessary to pass the address of a stub
variable to the function.
This change lead to MHI WWAN device can't connect to internet.
I found a netwrok issue with kernel 6.19-rc4, but network works
well with kernel 6.18-rc1. After checking, this commit is the
root cause.
Before appliing this serial changes on MHI WWAN network, we shall
revert this change in case of v6.19 being impacted.
* Implement missing DCB connectors in uconn.c previously defined in conn.h.
* Replace kernel WARN_ON macro with printk message to more gracefully signify
an unknown connector was encountered.
With this patch, unknown connectors are explicitly marked with value 0
(DCB_CONNECTOR_VGA) to match the tested current behavior. Although 0xff
(DCB_CONNECTOR_NONE) may be more suitable, I don't want to introduce a
breaking change.
Alex Ramírez [Sat, 13 Dec 2025 00:53:26 +0000 (19:53 -0500)]
drm/nouveau: add missing DCB connector types
* Add missing DCB connectors in conn.h as per the NVIDIA DCB specification.
A lot of connector logic was rewritten for Linux v6.5; some display connector types
went unaccounted-for which caused kernel warnings on devices with the now-unsupported
DCB connectors. This patch adds all of the DCB connectors as defined by NVIDIA to the
dcb_connector_type enum to bring back support for these connectors to the new logic.
Alex Deucher [Fri, 16 Jan 2026 02:45:43 +0000 (21:45 -0500)]
drm/amdgpu: fix type for wptr in ring backup
Needs to be a u64.
Fixes: 77cc0da39c7c ("drm/amdgpu: track ring state associated with a fence") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 56fff1941abd3ca3b6f394979614ca7972552f7f)
Timur Kristóf [Mon, 19 Jan 2026 20:36:24 +0000 (21:36 +0100)]
drm/amd/pm: Workaround SI powertune issue on Radeon 430 (v2)
Radeon 430 and 520 are OEM GPUs from 2016~2017
They have the same device id: 0x6611 and revision: 0x87
On the Radeon 430, powertune is buggy and throttles the GPU,
never allowing it to reach its maximum SCLK. Work around this
bug by raising the TDP limits we program to the SMC from
24W (specified by the VBIOS on Radeon 430) to 32W.
Disabling powertune entirely is not a viable workaround,
because it causes the Radeon 520 to heat up above 100 C,
which I prefer to avoid.
Additionally, revise the maximum SCLK limit. Considering the
above issue, these GPUs never reached a high SCLK on Linux,
and the workarounds were added before the GPUs were released,
so the workaround likely didn't target these specifically.
Use 780 MHz (the maximum SCLK according to the VBIOS on the
Radeon 430). Note that the Radeon 520 VBIOS has a higher
maximum SCLK: 905 MHz, but in practice it doesn't seem to
perform better with the higher clock, only heats up more.
v2:
Move the workaround to si_populate_smc_tdp_limits.
Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 966d70f1e160bdfdecaf7ff2b3f22ad088516e9f)
Timur Kristóf [Mon, 19 Jan 2026 20:36:23 +0000 (21:36 +0100)]
drm/amd/pm: Don't clear SI SMC table when setting power limit
There is no reason to clear the SMC table.
We also don't need to recalculate the power limit then.
Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e214d626253f5b180db10dedab161b7caa41f5e9)
Timur Kristóf [Mon, 19 Jan 2026 20:36:22 +0000 (21:36 +0100)]
drm/amd/pm: Fix si_dpm mmCG_THERMAL_INT setting
Use WREG32 to write mmCG_THERMAL_INT.
This is a direct access register.
Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2555f4e4a741d31e0496572a8ab4f55941b4e30e)
Linus Torvalds [Wed, 21 Jan 2026 17:34:45 +0000 (09:34 -0800)]
Merge tag 'soc-fixes-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The main changes are devicetree updates for qualcomm and rockchips
arm64 platforms, fixing minor mistakes in SoC and board specific
settings:
- GPIO settings for Pinephone Pro buttons
- Register ranges for rk3576 GPU
- Power domains on sc8280xp
- Clocks on qcom talos
- dtc warnings for extraneous properties, nonstandard node names and
undocument identifiers
The Tegra210 platform gets a single revert for a devicetree change
that caused a 6.19 regression.
On 32-bit Arm, we have trivial fixes for Microchip SAMA7 devicetree
files and NPCM Kconfig, as well as Andrew Jeffery being officially
listed as MAINTAINER for NPCM.
A single driver fix is for Qualcomm RPMHD power domains, bringing the
driver up to date with a devicetree change that added additional power
domains to be enabled"
* tag 'soc-fixes-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
MAINTAINERS: Add Andrew as M: to ARM/NUVOTON NPCM ARCHITECTURE
MAINTAINERS: update email address for Yixun Lan
Revert "arm64: tegra: Add interconnect properties for Tegra210"
arm64: dts: rockchip: Drop unsupported properties
arm64: dts: rockchip: Fix gpio pinctrl node names
arm64: dts: rockchip: Fix pinctrl property typo on rk3326-odroid-go3
arm64: dts: rockchip: Drop "sitronix,st7789v" fallback compatible from rk3568-wolfvision
ARM: dts: microchip: sama7d65: fix size-cells property for i2c3
ARM: dts: microchip: sama7d65: fix the ranges property for flx9
arm: npcm: drop unused Kconfig ERRATA symbol
arm64: dts: rockchip: Fix wrong register range of rk3576 gpu
arm64: dts: rockchip: Configure MCLK for analog sound on NanoPi M5
arm64: dts: rockchip: Fix headphones widget name on NanoPi M5
ARM: dts: microchip: lan966x: Fix the access to the PHYs for pcb8290
arm64: dts: rockchip: remove redundant max-link-speed from nanopi-r4s
arm64: dts: rockchip: remove dangerous max-link-speed from helios64
arm64: dts: rockchip: fix unit-address for RK3588 NPU's core1 and core2's IOMMU
arm64: dts: rockchip: Fix wifi interrupts flag on Sakura Pi RK3308B
arm64: dts: qcom: sm8650: Fix compile warnings in USB controller node
arm64: dts: qcom: sm8550: Fix compile warnings in USB controller node
...
Linus Torvalds [Wed, 21 Jan 2026 16:42:34 +0000 (08:42 -0800)]
Merge tag 'for-6.19-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- protect reading super block vs setting block size externally (found
by syzbot)
- make sure no transaction is started in read-only mode even with some
rescue mount option combinations
- fix checksum calculation of backup super blocks when block-group-tree
is enabled
- more extensive mount-time checks of device items that could be left
after device replace and attempting degraded mount
- fix build warning with -Wmaybe-uninitialized on loongarch64-gcc 12
* tag 'for-6.19-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add extra device item checks at mount
btrfs: fix missing fields in superblock backup with BLOCK_GROUP_TREE
btrfs: reject new transactions if the fs is fully read-only
btrfs: sync read disk super and set block size
btrfs: fix Wmaybe-uninitialized warning in replay_one_buffer()
Ming Lei [Tue, 13 Jan 2026 08:58:02 +0000 (16:58 +0800)]
selftests/ublk: fix garbage output in foreground mode
Initialize _evtfd to -1 in struct dev_ctx to prevent garbage output
when running kublk in foreground mode. Without this, _evtfd is
zero-initialized to 0 (stdin), and ublk_send_dev_event() writes
binary data to stdin which appears as garbage on the terminal.
Also fix debug message format string.
Fixes: 6aecda00b7d1 ("selftests: ublk: add kernel selftests for ublk") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Tue, 13 Jan 2026 08:58:01 +0000 (16:58 +0800)]
selftests/ublk: fix error handling for starting device
Fix error handling in ublk_start_daemon() when start_dev fails:
1. Call ublk_ctrl_stop_dev() to cancel inflight uring_cmd before
cleanup. Without this, the device deletion may hang waiting for
I/O completion that will never happen.
2. Add fail_start label so that pthread_join() is called on the
error path. This ensures proper thread cleanup when startup fails.
Fixes: 6aecda00b7d1 ("selftests: ublk: add kernel selftests for ublk") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Tue, 13 Jan 2026 08:58:00 +0000 (16:58 +0800)]
selftests/ublk: fix IO thread idle check
Include cmd_inflight in ublk_thread_is_done() check. Without this,
the thread may exit before all FETCH commands are completed, which
may cause device deletion to hang.
Fixes: 6aecda00b7d1 ("selftests: ublk: add kernel selftests for ublk") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
block: make the new blkzoned UAPI constants discoverable
The Linux 6.19 merge window added the new BLKREPORTZONESV2 ioctl, and
with it the new BLK_ZONE_REP_CACHED and BLK_ZONE_COND_ACTIVE constants.
The two constants are defined as part of enums, which makes it very
painful for userspace to discover if they are present in the installed
system headers.
Use the #define to the same name trick to make them trivially
discoverable using CPP directives.
Fixes: 0bf0e2e46668 ("block: track zone conditions") Fixes: b30ffcdc0c15 ("block: introduce BLKREPORTZONESV2 ioctl") Reported-by: Andrey Albershteyn <aalbersh@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Seamus Connor [Thu, 15 Jan 2026 02:59:52 +0000 (18:59 -0800)]
ublk: fix ublksrv pid handling for pid namespaces
When ublksrv runs inside a pid namespace, START/END_RECOVERY compared
the stored init-ns tgid against the userspace pid (getpid vnr), so the
check failed and control ops could not proceed. Compare against the
caller’s init-ns tgid and store that value, then translate it back to
the caller’s pid namespace when reporting GET_DEV_INFO so ublk list
shows a sensible pid.
Testing: start/recover in a pid namespace; `ublk list` shows
reasonable pid values in init, child, and sibling namespaces.
Fixes: c2c8089f325e ("ublk: validate ublk server pid") Signed-off-by: Seamus Connor <sconnor@purestorage.com> Reviewed-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lukasz Laguna [Wed, 21 Jan 2026 14:33:04 +0000 (15:33 +0100)]
drm/xe: Update wedged.mode only after successful reset policy change
Previously, the driver's internal wedged.mode state was updated without
verifying whether the corresponding engine reset policy update in GuC
succeeded. This could leave the driver reporting a wedged.mode state
that doesn't match the actual reset behavior programmed in GuC.
With this change, the reset policy is updated first, and the driver's
wedged.mode state is modified only if the policy update succeeds on all
available GTs.
This patch also introduces two functional improvements:
- The policy is sent to GuC only when a change is required. An update
is needed only when entering or leaving XE_WEDGED_MODE_UPON_ANY_HANG,
because only in that case the reset policy changes. For example,
switching between XE_WEDGED_MODE_UPON_CRITICAL_ERROR and
XE_WEDGED_MODE_NEVER doesn't affect the reset policy, so there is no
need to send the same value to GuC.
- An inconsistent_reset flag is added to track cases where reset policy
update succeeds only on a subset of GTs. If such inconsistency is
detected, future wedged mode configuration will force a retry of the
reset policy update to restore a consistent state across all GTs.
Matthew Auld [Tue, 20 Jan 2026 11:06:11 +0000 (11:06 +0000)]
drm/xe/migrate: fix job lock assert
We are meant to be checking the user vm for the bind queue, but actually
we are checking the migrate vm. For various reasons this is not
currently firing but this will likely change in the future.
Now that we have the user_vm attached to the bind queue, we can fix this
by directly checking that here.
Fixes: dba89840a920 ("drm/xe: Add GT TLB invalidation jobs") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Arvind Yadav <arvind.yadav@intel.com> Link: https://patch.msgid.link/20260120110609.77958-4-matthew.auld@intel.com
(cherry picked from commit 9dd1048bca4fe2aa67c7a286bafb3947537adedb) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Matthew Auld [Tue, 20 Jan 2026 11:06:10 +0000 (11:06 +0000)]
drm/xe/uapi: disallow bind queue sharing
Currently this is very broken if someone attempts to create a bind
queue and share it across multiple VMs. For example currently we assume
it is safe to acquire the user VM lock to protect some of the bind queue
state, but if allow sharing the bind queue with multiple VMs then this
quickly breaks down.
To fix this reject using a bind queue with any VM that is not the same
VM that was originally passed when creating the bind queue. This a uAPI
change, however this was more of an oversight on kernel side that we
didn't reject this, and expectation is that userspace shouldn't be using
bind queues in this way, so in theory this change should go unnoticed.
Based on a patch from Matt Brost.
v2 (Matt B):
- Hold the vm lock over queue create, to ensure it can't be closed as
we attach the user_vm to the queue.
- Make sure we actually check for NULL user_vm in destruction path.
v3:
- Fix error path handling.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Michal Mrozek <michal.mrozek@intel.com> Cc: Carl Zhang <carl.zhang@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Acked-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Arvind Yadav <arvind.yadav@intel.com> Acked-by: Michal Mrozek <michal.mrozek@intel.com> Link: https://patch.msgid.link/20260120110609.77958-3-matthew.auld@intel.com
(cherry picked from commit 9dd08fdecc0c98d6516c2d2d1fa189c1332f8dab) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Just toggling the descriptor's "requested" flag is not enough. We need
to properly request it in order to potentially propagate any
configuration to pinctrl via the .request() callback.
We must not take the reference to the device at this point (the device
is not ready but we're also requesting the device's own descriptor) so
make the _commit() variants of request and free functions available to
GPIO core in order to use them instead of their regular counterparts.
This fixes an audio issue reported on one of the Qualcomm platforms.
Swaraj Gaikwad [Tue, 13 Jan 2026 15:06:39 +0000 (20:36 +0530)]
slab: fix kmalloc_nolock() context check for PREEMPT_RT
On PREEMPT_RT kernels, local_lock becomes a sleeping lock. The current
check in kmalloc_nolock() only verifies we're not in NMI or hard IRQ
context, but misses the case where preemption is disabled.
When a BPF program runs from a tracepoint with preemption disabled
(preempt_count > 0), kmalloc_nolock() proceeds to call
local_lock_irqsave() which attempts to acquire a sleeping lock,
triggering:
BUG: sleeping function called from invalid context
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 6128
preempt_count: 2, expected: 0
Fix this by checking !preemptible() on PREEMPT_RT, which directly
expresses the constraint that we cannot take a sleeping lock when
preemption is disabled. This encompasses the previous checks for NMI
and hard IRQ contexts while also catching cases where preemption is
disabled.
Fixes: af92793e52c3 ("slab: Introduce kmalloc_nolock() and kfree_nolock().") Reported-by: syzbot+b1546ad4a95331b2101e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=b1546ad4a95331b2101e Signed-off-by: Swaraj Gaikwad <swarajgaikwad1925@gmail.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Harry Yoo <harry.yoo@oracle.com> Link: https://patch.msgid.link/20260113150639.48407-1-swarajgaikwad1925@gmail.co Cc: <stable@vger.kernel.org> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Takashi Iwai [Wed, 21 Jan 2026 08:20:20 +0000 (09:20 +0100)]
ALSA: usb-audio: Use the right limit for PCM OOB check
The recent fix commit for addressing the OOB access of PCM URB data
buffer caused a regression on Behringer UMC2020HD device, resulting in
choppy sound. The fix used ep->max_urb_frames for the upper limit
check, and this is no right value to be referred.
Use the actual buffer size (ctx->buffer_size) as the upper limit
instead, which also avoids the regression on the device above.
projects / ceph-client.git / log