Bill Scales [Fri, 21 Nov 2025 10:06:22 +0000 (10:06 +0000)]
qa: Reduce number of osd threads when using compression
Smithi nodes used by teuthology tests have 8 CPU cores and typically run
4 OSD processes. When bluestore software compression is enabled the size
of the OSD thread pool needs to be reduced to 2 threads per OSD because
these threads can easily use 100% of a core. This avoids excessive
amounts of context switches, which leads to OSD threads timing out,
which causes the OSD to drop heartbeat pings and for the monitor to
temporarily mark it down. In extreme cases this can lead to PGs getting
stuck in repeated loops of peering until the teuthology test times out.
Context switches happen oppurtunistically at the end of system calls
so functions with lots of logging are some of the worst affected.
Fixes: https://tracker.ceph.com/issues/72879 Signed-off-by: Bill Scales <bill_scales@uk.ibm.com>
Bill Scales [Fri, 21 Nov 2025 10:38:44 +0000 (10:38 +0000)]
osd: Restrict logging in MissingLoc::add_source_info
add_source_info can generate an excessive amount of logging
if a PG has thousands of missing objects. When a system is
under load and threads are repeatedly context switching this
can lead to timeouts (tests showed this function taking up
to 10 seconds to execute with 99% of that time being in
logging calls where the thread was being pre-empted).
Stopping logging after the function has been running for
more than 0.5 seconds strikes a balance between providing
sufficient informtion to debug problems while providing
more stability when a system is heavily loaded.
Signed-off-by: Bill Scales <bill_scales@uk.ibm.com>
Bill Scales [Fri, 21 Nov 2025 10:25:48 +0000 (10:25 +0000)]
osd: Increase log level for listing missing list
Logging the entire contents of a missing list can generate a
1M character log line when there are 8000 missing objects in a
PG. Other places in the code logging the missing list use debug
level 25 which is not enabled by default in teuthology tests.
Signed-off-by: Bill Scales <bill_scales@uk.ibm.com>
Bill Scales [Mon, 24 Nov 2025 09:18:21 +0000 (09:18 +0000)]
osd: reset_tp_timeout should reset timeout for all shards
ShardedThreadPools are only used by the classic OSD process
which can have more than one thread for the same shard. Each
thread has a heartbeat timeout used to detect stalled threads.
Some code that is known to take a long time makes calls to
reset_tp_timeout to reset this timeout. However for sharded
pools this can be ineffective because it is common for threads
for the same shard to use the same locks (e.g. PG Lock) and
therefore if thread A is taking a long time and resetting
its timeout while holding a lock, thread B for the same shard
is liable to be waiting for the same lock, will not be
resetting its timeout and can be timed out.
Debug for issue 72879 showed heartbeat timeouts occurring at
the same time for both shards, an attempt to fix the problem
by calling reset_tp_timeout for the slow thread still showed
the other threads for the shard timing out waiting for the PG
lock that was held bythe slow thread. Looking at the OSD code
most places where reset_tp_timeout is called the thread is
holding the PG lock.
This commit moves the concept of shard_index from OSD into
ShardedThreadPool and modifies reset_tp_timeout so that it resets
the timeout for all threads for the same shard.
Some code calls reset_tp_timeout from inside loops that can take
a long time without consideration for how long the thread has
actually been running for. There is a risk that this type of
call could repeatedly reset the timeout for another shard which
is genuinely stuck and hence defeat the heartbeat checks. To
prevent this reset_tp_timeout is modified to be a NOP unless
the thread has been processing the current workitem for more
than 0.5 seconds. Therefore threads have to be slow but making
forward progress to be abe to reset the timeout.
Fixes: https://tracker.ceph.com/issues/72879 Signed-off-by: Bill Scales <bill_scales@uk.ibm.com>
Nitzan Mordechai [Tue, 18 Nov 2025 09:37:48 +0000 (09:37 +0000)]
Objecter: respect higher epoch subscription in tick
The OSD and Objecter share the same MonClient. During preboot, a potential
race condition exists where the OSD subscribes to osdmap epoch X, while
the Objecter subscribes to epoch X - 1.
The Objecter's subscription overrides the OSD's subscription. Consequently,
the monitor ignores the request (as it believes the OSD already has the
older map), causing the OSD to hang during preboot.
To fix this, check if a higher epoch is already subscribed before calling
_maybe_request_map during Objecter::tick. If a higher epoch is found,
maintain the existing subscription.
Afreen Misbah [Tue, 21 Oct 2025 16:37:46 +0000 (22:07 +0530)]
mgr/dashboard: Carbonize the Change Password Form
Fixes https://tracker.ceph.com/issues/73193
- using carbon based stylings, typography and components
- used grid layout for form arrangement
- breadcrumb is slightly off, which needs to be fixed by applying grid layout to the app shell
Kefu Chai [Sat, 22 Nov 2025 00:24:36 +0000 (08:24 +0800)]
qa/suites/rados/encoder: exclude ceph-osd-* when installing LTS releases
In a37b5b5, the ceph-osd-classic and ceph-osd-crimson packages were
added to qa/packages/packages.yaml. The "install" task uses this file as
the default package list for all branches, including LTS releases like
Reef.
However, a37b5b5 only exists in the main branch and won't be backported
to LTS branches. This causes installation failures in the rados/encoder
test suite, which verifies forward compatibility by installing LTS
releases and testing whether they can decode the latest corpus.
Exclude ceph-osd-classic and ceph-osd-crimson from LTS installations to
ensure the test suite can successfully install ceph-dencoder, which is
required for the interoperability tests.
Afreen Misbah [Wed, 19 Nov 2025 20:03:26 +0000 (01:33 +0530)]
monitoring: Fixes for development
- fixes tox.ini using and undefined env - `grafonnet-check`( instead of `jsonnet-check`)
- adds steps for local development of mixins and building jsonnet
- added help command in Makefile
- added comments and descriptions for Makefile and tox.ini
Shraddha Agrawal [Mon, 17 Nov 2025 19:50:44 +0000 (01:20 +0530)]
qa/clusters/crimson: increase reactors in fixed-1 cluster
Issue: Various different tests were failing randomly due to slow
ops. There was no common ground between them, it was happening
across differnet object stores (seastore and bluestore) and
across different tests.
Cause: Since this is happening quite randomly, this is likely
happening due to low reactor count.
Solution: We are opting the solution to increase reactors used
for testing. I've increased them to 3 from the initial 2 value.
Matan Breizman [Sun, 16 Nov 2025 12:52:05 +0000 (12:52 +0000)]
qa/suites: exclude ceph-osd-classic
a37b5b5bde8c2e8d6890f16b31046119ed55f25d added ceph-osd-classic
package.
old-clients and upgrade tests should not try to install the new package
as it is not available in older releases.
Anoop C S [Tue, 21 Oct 2025 08:53:50 +0000 (14:23 +0530)]
mgr/smb: Disable posix locking in share definition
The prerequisites for supporting durable handles[1] in Samba include
disabling the mapping of POSIX locks, as well as setting the `kernel
oplocks` and `kernel sharemodes` parameters to disabled. Currently
this configuration is hard‑coded, but in the future it could be made
conditional and combined with other settings to enable persistent
handles on continuously available shares.
projects / ceph-ci.git / log