Jakub Kicinski [Thu, 8 Jan 2026 16:49:24 +0000 (08:49 -0800)]
Merge tag 'wireless-2026-01-08' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of fixes:
- mac80211:
- long-standing injection bug due to chanctx rework
- more recent interface iteration issue
- collect statistics before removing stations
- hwsim:
- fix NAN frequency typo (potential NULL ptr deref)
- fix locking of radio lock (needs softirqs disabled)
- wext:
- ancient issue with compat and events copying some
uninitialized stack data to userspace
* tag 'wireless-2026-01-08' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: collect station statistics earlier when disconnect
wifi: mac80211: restore non-chanctx injection behaviour
wifi: mac80211_hwsim: disable BHs for hwsim_radio_lock
wifi: mac80211: don't iterate not running interfaces
wifi: mac80211_hwsim: fix typo in frequency notification
wifi: avoid kernel-infoleak from struct iw_point
====================
Jakub Kicinski [Tue, 6 Jan 2026 16:34:26 +0000 (08:34 -0800)]
tools: ynl: don't install tests
make's install target is meant for installing the production
artifacts, AFAIU. Don't install test_ynl_cli and test_ynl_ethtool
from under the main YNL install target. The install target
under tests/ is retained in case someone wants the tests
to be installed.
Fixes: 308b7dee3e5c ("tools: ynl: add YNL test framework") Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20260106163426.1468943-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
msg_get_inq is an input field from caller to callee. Don't set it in
the callee, as the caller may not clear it on struct reuse.
This is a kernel-internal variant of msghdr only, and the only user
does reinitialize the field. So this is not critical for that reason.
But it is more robust to avoid the write, and slightly simpler code.
And it fixes a bug, see below.
Callers set msg_get_inq to request the input queue length to be
returned in msg_inq. This is equivalent to but independent from the
SO_INQ request to return that same info as a cmsg (tp->recvmsg_inq).
To reduce branching in the hot path the second also sets the msg_inq.
That is WAI.
This is a fix to commit 4d1442979e4a ("af_unix: don't post cmsg for
SO_INQ unless explicitly asked for"), which fixed the inverse.
Also avoid NULL pointer dereference in unix_stream_read_generic if
state->msg is NULL and msg->msg_get_inq is written. A NULL state->msg
can happen when splicing as of commit 2b514574f7e8 ("net: af_unix:
implement splice for stream af_unix sockets").
Breno Leitao [Tue, 6 Jan 2026 14:31:14 +0000 (06:31 -0800)]
bnxt_en: Fix NULL pointer crash in bnxt_ptp_enable during error cleanup
When bnxt_init_one() fails during initialization (e.g.,
bnxt_init_int_mode returns -ENODEV), the error path calls
bnxt_free_hwrm_resources() which destroys the DMA pool and sets
bp->hwrm_dma_pool to NULL. Subsequently, bnxt_ptp_clear() is called,
which invokes ptp_clock_unregister().
Since commit a60fc3294a37 ("ptp: rework ptp_clock_unregister() to
disable events"), ptp_clock_unregister() now calls
ptp_disable_all_events(), which in turn invokes the driver's .enable()
callback (bnxt_ptp_enable()) to disable PTP events before completing the
unregistration.
bnxt_ptp_enable() attempts to send HWRM commands via bnxt_ptp_cfg_pin()
and bnxt_ptp_cfg_event(), both of which call hwrm_req_init(). This
function tries to allocate from bp->hwrm_dma_pool, causing a NULL
pointer dereference:
Xiang Mei [Tue, 6 Jan 2026 03:41:00 +0000 (20:41 -0700)]
net/sched: sch_qfq: Fix NULL deref when deactivating inactive aggregate in qfq_reset
`qfq_class->leaf_qdisc->q.qlen > 0` does not imply that the class
itself is active.
Two qfq_class objects may point to the same leaf_qdisc. This happens
when:
1. one QFQ qdisc is attached to the dev as the root qdisc, and
2. another QFQ qdisc is temporarily referenced (e.g., via qdisc_get()
/ qdisc_put()) and is pending to be destroyed, as in function
tc_new_tfilter.
When packets are enqueued through the root QFQ qdisc, the shared
leaf_qdisc->q.qlen increases. At the same time, the second QFQ
qdisc triggers qdisc_put and qdisc_destroy: the qdisc enters
qfq_reset() with its own q->q.qlen == 0, but its class's leaf
qdisc->q.qlen > 0. Therefore, the qfq_reset would wrongly deactivate
an inactive aggregate and trigger a null-deref in qfq_deactivate_agg:
Baochen Qiang [Mon, 22 Dec 2025 02:29:07 +0000 (10:29 +0800)]
wifi: mac80211: collect station statistics earlier when disconnect
In __sta_info_destroy_part2(), station statistics are requested after the
IEEE80211_STA_NONE -> IEEE80211_STA_NOTEXIST transition. This is
problematic because the driver may be unable to handle the request due to
the STA being in the NOTEXIST state (i.e. if the driver destroys the
underlying data when transitioning to NOTEXIST).
Move the statistics collection to before the state transition to avoid
this issue.
During the transition to use channel contexts throughout, the
ability to do injection while in monitor mode concurrent with
another interface was lost, since the (virtual) monitor won't
have a chanctx assigned in this scenario.
It's harder to fix drivers that actually transitioned to using
channel contexts themselves, such as mt76, but it's easy to do
those that are (still) just using the emulation. Do that.
Miri Korenblit [Wed, 7 Jan 2026 13:37:36 +0000 (14:37 +0100)]
wifi: mac80211: don't iterate not running interfaces
for_each_chanctx_user_* was introdcued as a replacement for
for_each_sdata_link, which visits also other chanctx users that are not
link.
for_each_sdata_link skips not running interfaces, do the same for
for_each_chanctx_user_*
Benjamin Berg [Wed, 7 Jan 2026 13:36:51 +0000 (14:36 +0100)]
wifi: mac80211_hwsim: fix typo in frequency notification
The NAN notification is for 5745 MHz which corresponds to channel 149
and not 5475 which is not actually a valid channel. This could result in
a NULL pointer dereference in cfg80211_next_nan_dw_notif.
Fixes: a37a6f54439b ("wifi: mac80211_hwsim: Add simulation support for NAN device") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20260107143652.7dab2035836f.Iacbaf7bb94ed5c14a0928a625827e4137d8bfede@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Eric Dumazet [Thu, 8 Jan 2026 10:19:27 +0000 (10:19 +0000)]
wifi: avoid kernel-infoleak from struct iw_point
struct iw_point has a 32bit hole on 64bit arches.
struct iw_point {
void __user *pointer; /* Pointer to the data (in user space) */
__u16 length; /* number of fields or size in bytes */
__u16 flags; /* Optional params */
};
Make sure to zero the structure to avoid disclosing 32bits of kernel data
to user space.
Fixes: 87de87d5e47f ("wext: Dispatch and handle compat ioctls entirely in net/wireless/wext.c") Reported-by: syzbot+bfc7323743ca6dbcc3d3@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/695f83f3.050a0220.1c677c.0392.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260108101927.857582-1-edumazet@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
net: airoha: Fix schedule while atomic in airoha_ppe_deinit()
airoha_ppe_deinit() runs airoha_npu_ppe_deinit() in atomic context.
airoha_npu_ppe_deinit routine allocates ppe_data buffer with GFP_KERNEL
flag. Rely on rcu_replace_pointer in airoha_ppe_deinit routine in order
to fix schedule while atomic issue in airoha_npu_ppe_deinit() since we
do not need atomic context there.
====================
net: netdevsim: fix inconsistent carrier state after link/unlink
This series fixes netdevsim's inconsistent behavior between carrier
and link/unlink state.
More specifically, this fixes a bug that the carrier goes DOWN although
two netdevsim were peered, depending on the order of peering and ifup.
Especially in a NetworkManager-enabled environment, netdevsim test fails
because of this.
The first patch fixes the bug itself in netdevsim/bus.c by adding
netif_carrier_on() into a proper function. The second patch adds a
regression test for this bug.
====================
Yohei Kojima [Mon, 5 Jan 2026 15:17:33 +0000 (00:17 +0900)]
selftests: netdevsim: add carrier state consistency test
This commit adds a test case for netdevsim carrier state consistency.
Specifically, the added test verifies the carrier state during the
following operations:
1. Unlink two netdevsims
2. ifdown one netdevsim, then ifup again
3. Link the netdevsims again
4. ifdown one netdevsim, then ifup again
These steps verifies that the carrier is UP iff two netdevsims are
linked and ifuped.
Yohei Kojima [Mon, 5 Jan 2026 15:17:32 +0000 (00:17 +0900)]
net: netdevsim: fix inconsistent carrier state after link/unlink
This patch fixes the edge case behavior on ifup/ifdown and
linking/unlinking two netdevsim interfaces:
1. unlink two interfaces netdevsim1 and netdevsim2
2. ifdown netdevsim1
3. ifup netdevsim1
4. link two interfaces netdevsim1 and netdevsim2
5. (Now two interfaces are linked in terms of netdevsim peer, but
carrier state of the two interfaces remains DOWN.)
This inconsistent behavior is caused by the current implementation,
which only cares about the "link, then ifup" order, not "ifup, then
link" order. This patch fixes the inconsistency by calling
netif_carrier_on() when two netdevsim interfaces are linked.
This patch fixes buggy behavior on NetworkManager-based systems which
causes the netdevsim test to fail with the following error:
# timeout set to 600
# selftests: drivers/net/netdevsim: peer.sh
# 2025/12/25 00:54:03 socat[9115] W address is opened in read-write mode but only supports read-only
# 2025/12/25 00:56:17 socat[9115] W connect(7, AF=2 192.168.1.1:1234, 16): Connection timed out
# 2025/12/25 00:56:17 socat[9115] E TCP:192.168.1.1:1234: Connection timed out
# expected 3 bytes, got 0
# 2025/12/25 00:56:17 socat[9109] W exiting on signal 15
not ok 13 selftests: drivers/net/netdevsim: peer.sh # exit=1
This patch also solves timeout on TCP Fast Open (TFO) test in
NetworkManager-based systems because it also depends on netdevsim's
carrier consistency.
Shivani Gupta [Mon, 5 Jan 2026 00:59:05 +0000 (00:59 +0000)]
net/sched: act_api: avoid dereferencing ERR_PTR in tcf_idrinfo_destroy
syzbot reported a crash in tc_act_in_hw() during netns teardown where
tcf_idrinfo_destroy() passed an ERR_PTR(-EBUSY) value as a tc_action
pointer, leading to an invalid dereference.
Guard against ERR_PTR entries when iterating the action IDR so teardown
does not call tc_act_in_hw() on an error pointer.
net: sfp: return the number of written bytes for smbus single byte access
We expect the SFP write accessors to return the number of written bytes.
We fail to do so for single-byte smbus accesses, which may cause errors
when setting a module's high-power state and for some cotsworks modules.
Let's return the amount of written bytes, as expected.
Fixes: 7662abf4db94 ("net: phy: sfp: Add support for SMBus module access") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260105151840.144552-1-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sun, 4 Jan 2026 09:39:52 +0000 (11:39 +0200)]
Revert "dsa: mv88e6xxx: make serdes SGMII/Fiber tx amplitude configurable"
This reverts commit 926eae604403acfa27ba5b072af458e87e634a50, which
never could have produced the intended effect:
https://lore.kernel.org/netdev/AM0PR06MB10396BBF8B568D77556FC46F8F7DEA@AM0PR06MB10396.eurprd06.prod.outlook.com/
The reason why it is broken beyond repair in this form is that the
mv88e6xxx driver outsources its "tx-p2p-microvolt" property to the OF
node of an external Ethernet PHY. This:
(a) does not work if there is no external PHY (chip-to-chip connection,
or SFP module)
(b) pollutes the OF property namespace / bindings of said external PHY
("tx-p2p-microvolt" could have meaning for the Ethernet PHY's SerDes
interface as well)
We can revisit the idea of making SerDes amplitude configurable once we
have proper bindings for the mv88e6xxx SerDes. Until then, remove the
code that leaves us with unnecessary baggage.
Fixes: 926eae604403 ("dsa: mv88e6xxx: make serdes SGMII/Fiber tx amplitude configurable") Cc: Holger Brunck <holger.brunck@hitachienergy.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260104093952.486606-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mohammad Heib [Sun, 4 Jan 2026 21:31:01 +0000 (23:31 +0200)]
net: fix memory leak in skb_segment_list for GRO packets
When skb_segment_list() is called during packet forwarding, it handles
packets that were aggregated by the GRO engine.
Historically, the segmentation logic in skb_segment_list assumes that
individual segments are split from a parent SKB and may need to carry
their own socket memory accounting. Accordingly, the code transfers
truesize from the parent to the newly created segments.
Prior to commit ed4cccef64c1 ("gro: fix ownership transfer"), this
truesize subtraction in skb_segment_list() was valid because fragments
still carry a reference to the original socket.
However, commit ed4cccef64c1 ("gro: fix ownership transfer") changed
this behavior by ensuring that fraglist entries are explicitly
orphaned (skb->sk = NULL) to prevent illegal orphaning later in the
stack. This change meant that the entire socket memory charge remained
with the head SKB, but the corresponding accounting logic in
skb_segment_list() was never updated.
As a result, the current code unconditionally adds each fragment's
truesize to delta_truesize and subtracts it from the parent SKB. Since
the fragments are no longer charged to the socket, this subtraction
results in an effective under-count of memory when the head is freed.
This causes sk_wmem_alloc to remain non-zero, preventing socket
destruction and leading to a persistent memory leak.
The leak can be observed via KMEMLEAK when tearing down the networking
environment:
Since skb_segment_list() is exclusively used for SKB_GSO_FRAGLIST
packets constructed by GRO, the truesize adjustment is removed.
The call to skb_release_head_state() must be preserved. As documented in
commit cf673ed0e057 ("net: fix fraglist segmentation reference count
leak"), it is still required to correctly drop references to SKB
extensions that may be overwritten during __copy_skb_header().
Fixes: ed4cccef64c1 ("gro: fix ownership transfer") Signed-off-by: Mohammad Heib <mheib@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260104213101.352887-1-mheib@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sun, 4 Jan 2026 16:52:32 +0000 (08:52 -0800)]
netlink: specs: netdev: clarify the page pool API a little
The phrasing of the page-pool-get doc is very confusing.
It's supposed to highlight that support depends on the driver
doing its part but it sounds like orphaned page pools won't
be visible.
The description of the ifindex is completely wrong.
We move the page pool to loopback and skip the attribute if
ifindex is loopback.
net/sched: act_mirred: Fix leak when redirecting to self on egress
Whenever a mirred redirect to self on egress happens, mirred allocates a
new skb (skb_to_send). The loop to self check was done after that
allocation, but was not freeing the newly allocated skb, causing a leak.
Fix this by moving the if-statement to before the allocation of the new
skb.
The issue was found by running the accompanying tdc test in 2/2
with config kmemleak enabled.
After a few minutes the kmemleak thread ran and reported the leak coming from
mirred.
====================
vsock: Fix SO_ZEROCOPY on accept()ed vsocks
vsock has its own handling of setsockopt(SO_ZEROCOPY). Which works just
fine unless socket comes from a call to accept(). Because
SOCK_CUSTOM_SOCKOPT flag is missing, attempting to set the option always
results in errno EOPNOTSUPP.
====================
Jakub Kicinski [Sun, 4 Jan 2026 18:59:59 +0000 (10:59 -0800)]
Merge tag 'nf-26-01-02' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
The following patchset contains Netfilter fixes for *net*:
1) Fix overlap detection for nf_tables with concatenated ranges.
There are cases where element could not be added due to a conflict
with existing range, while kernel reports success to userspace.
2) update selftest to cover this bug.
3) synproxy update path should use READ/WRITE once as we replace
config struct while packet path might read it in parallel.
This relies on said config struct to fit sizeof(long).
From Fernando Fernandez Mancera.
4) Don't return -EEXIST from xtables in module load path, a pending
patch to module infra will spot a warning if this happens.
From Daniel Gomez.
5) Fix a memory leak in nf_tables when chain hits 2**32 users
and rule is to be hw-offloaded, from Zilin Guan.
6) Avoid infinite list growth when insert rate is high in nf_conncount,
also from Fernando.
* tag 'nf-26-01-02' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_conncount: update last_gc only when GC has been performed
netfilter: nf_tables: fix memory leak in nf_tables_newrule()
netfilter: replace -EEXIST with -EBUSY
netfilter: nft_synproxy: avoid possible data-race on update operation
selftests: netfilter: nft_concat_range.sh: add check for overlap detection bug
netfilter: nft_set_pipapo: fix range overlap detection
====================
Jakub added a warning in nf_conntrack_cleanup_net_list() to make debugging
leaked skbs/conntrack references more obvious.
syzbot reports this as triggering, and I can also reproduce this via
ip_defrag.sh selftest:
conntrack cleanup blocked for 60s
WARNING: net/netfilter/nf_conntrack_core.c:2512
[..]
conntrack clenups gets stuck because there are skbs with still hold nf_conn
references via their frag_list.
net.core.skb_defer_max=0 makes the hang disappear.
Eric Dumazet points out that skb_release_head_state() doesn't follow the
fraglist.
ip_defrag.sh can only reproduce this problem since
commit 6471658dc66c ("udp: use skb_attempt_defer_free()"), but AFAICS this
problem could happen with TCP as well if pmtu discovery is off.
The relevant problem path for udp is:
1. netns emits fragmented packets
2. nf_defrag_v6_hook reassembles them (in output hook)
3. reassembled skb is tracked (skb owns nf_conn reference)
4. ip6_output refragments
5. refragmented packets also own nf_conn reference (ip6_fragment
calls ip6_copy_metadata())
6. on input path, nf_defrag_v6_hook skips defragmentation: the
fragments already have skb->nf_conn attached
7. skbs are reassembled via ipv6_frag_rcv()
8. skb_consume_udp -> skb_attempt_defer_free() -> skb ends up
in pcpu freelist, but still has nf_conn reference.
Possible solutions:
1 let defrag engine drop nf_conn entry, OR
2 export kick_defer_list_purge() and call it from the conntrack
netns exit callback, OR
3 add skb_has_frag_list() check to skb_attempt_defer_free()
2 & 3 also solve ip_defrag.sh hang but share same drawback:
Such reassembled skbs, queued to socket, can prevent conntrack module
removal until userspace has consumed the packet. While both tcp and udp
stack do call nf_reset_ct() before placing skb on socket queue, that
function doesn't iterate frag_list skbs.
Therefore drop nf_conn entries when they are placed in defrag queue.
Keep the nf_conn entry of the first (offset 0) skb so that reassembled
skb retains nf_conn entry for sake of TX path.
Note that fixes tag is incorrect; it points to the commit introducing the
'ip_defrag.sh reproducible problem': no need to backport this patch to
every stable kernel.
Reported-by: syzbot+4393c47753b7808dac7d@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/693b0fa7.050a0220.4004e.040d.GAE@google.com/ Fixes: 6471658dc66c ("udp: use skb_attempt_defer_free()") Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260102140030.32367-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix by using virtio_device->device consistently for
allocation and deallocation
Fixes: 4944be2f5ad8c ("virtio_net: Allocate rss_hdr with devres") Signed-off-by: Kommula Shiva Shankar <kshankar@marvell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://patch.msgid.link/20260102101900.692770-1-kshankar@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Srijit Bose [Wed, 31 Dec 2025 08:36:25 +0000 (00:36 -0800)]
bnxt_en: Fix potential data corruption with HW GRO/LRO
Fix the max number of bits passed to find_first_zero_bit() in
bnxt_alloc_agg_idx(). We were incorrectly passing the number of
long words. find_first_zero_bit() may fail to find a zero bit and
cause a wrong ID to be used. If the wrong ID is already in use, this
can cause data corruption. Sometimes an error like this can also be
seen:
Fix it by passing the correct number of bits MAX_TPA_P5. Use
DECLARE_BITMAP() to more cleanly define the bitmap. Add a sanity
check to warn if a bit cannot be found and reset the ring [MChan].
Fixes: ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for 57500 chips.") Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Srijit Bose <srijit.bose@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20251231083625.3911652-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zilin Guan [Tue, 30 Dec 2025 07:18:53 +0000 (07:18 +0000)]
net: wwan: iosm: Fix memory leak in ipc_mux_deinit()
Commit 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
allocated memory for pp_qlt in ipc_mux_init() but did not free it in
ipc_mux_deinit(). This results in a memory leak when the driver is
unloaded.
Free the allocated memory in ipc_mux_deinit() to fix the leak.
Cosmin Ratiu [Thu, 25 Dec 2025 13:27:17 +0000 (15:27 +0200)]
net/mlx5e: Dealloc forgotten PSP RX modify header
The commit which added RX steering rules for PSP forgot to free a modify
header HW object on the cleanup path, which lead to health errors when
reloading the driver and uninitializing the device:
Gal Pressman [Thu, 25 Dec 2025 13:27:16 +0000 (15:27 +0200)]
net/mlx5e: Don't print error message due to invalid module
Dumping module EEPROM on newer modules is supported through the netlink
interface only.
Querying with old userspace ethtool (or other tools, such as 'lshw')
which still uses the ioctl interface results in an error message that
could flood dmesg (in addition to the expected error return value).
The original message was added under the assumption that the driver
should be able to handle all module types, but now that such flows are
easily triggered from userspace, it doesn't serve its purpose.
Change the log level of the print in mlx5_query_module_eeprom() to
debug.
Fixes: bb64143eee8c ("net/mlx5e: Add ethtool support for dump module EEPROM") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20251225132717.358820-5-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gal Pressman [Thu, 25 Dec 2025 13:27:15 +0000 (15:27 +0200)]
net/mlx5e: Fix NULL pointer dereference in ioctl module EEPROM query
The mlx5_query_mcia() function unconditionally dereferences the status
pointer to store the MCIA register status value.
However, mlx5e_get_module_id() passes NULL since it doesn't need the
status value.
Add a NULL check before dereferencing the status pointer to prevent a
NULL pointer dereference.
Fixes: 2e4c44b12f4d ("net/mlx5: Refactor EEPROM query error handling to return status separately") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20251225132717.358820-4-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexei Lazar [Thu, 25 Dec 2025 13:27:14 +0000 (15:27 +0200)]
net/mlx5e: Don't gate FEC histograms on ppcnt_statistical_group
Currently, the ppcnt_statistical_group capability check
incorrectly gates access to FEC histogram statistics.
This capability applies only to statistical and physical
counter groups, not for histogram data.
Restrict the ppcnt_statistical_group check to the
Physical_Layer_Counters and Physical_Layer_Statistical_Counters
groups.
Histogram statistics access remains gated by the pphcr
capability.
The issue is harmless as of today, as it happens that
ppcnt_statistical_group is set on all existing devices that
have pphcr set.
Fixes: 6b81b8a0b197 ("net/mlx5e: Don't query FEC statistics when FEC is disabled") Signed-off-by: Alexei Lazar <alazar@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20251225132717.358820-3-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/mlx5: Lag, multipath, give priority for routes with smaller network prefix
Today multipath offload is controlled by a single route and the route
controlling is selected if it meets one of the following criteria:
1. No controlling route is set.
2. New route destination is the same as old one.
3. New route metric is lower than old route metric.
This can cause unwanted behaviour in case a new route is added
with a smaller network prefix which should get the priority.
Fix this by adding a new criteria to give priority to new route with
a smaller network prefix.
Fixes: ad11c4f1d8fd ("net/mlx5e: Lag, Only handle events from highest priority multipath entry") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20251225132717.358820-2-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Di Zhu [Wed, 24 Dec 2025 01:22:24 +0000 (09:22 +0800)]
netdev: preserve NETIF_F_ALL_FOR_ALL across TSO updates
Directly increment the TSO features incurs a side effect: it will also
directly clear the flags in NETIF_F_ALL_FOR_ALL on the master device,
which can cause issues such as the inability to enable the nocache copy
feature on the bonding driver.
The fix is to include NETIF_F_ALL_FOR_ALL in the update mask, thereby
preventing it from being cleared.
Weiming Shi [Tue, 23 Dec 2025 20:35:35 +0000 (04:35 +0800)]
net: sock: fix hardened usercopy panic in sock_recv_errqueue
skbuff_fclone_cache was created without defining a usercopy region,
[1] unlike skbuff_head_cache which properly whitelists the cb[] field.
[2] This causes a usercopy BUG() when CONFIG_HARDENED_USERCOPY is
enabled and the kernel attempts to copy sk_buff.cb data to userspace
via sock_recv_errqueue() -> put_cmsg().
The crash occurs when: 1. TCP allocates an skb using alloc_skb_fclone()
(from skbuff_fclone_cache) [1]
2. The skb is cloned via skb_clone() using the pre-allocated fclone
[3] 3. The cloned skb is queued to sk_error_queue for timestamp
reporting 4. Userspace reads the error queue via recvmsg(MSG_ERRQUEUE)
5. sock_recv_errqueue() calls put_cmsg() to copy serr->ee from skb->cb
[4] 6. __check_heap_object() fails because skbuff_fclone_cache has no
usercopy whitelist [5]
When cloned skbs allocated from skbuff_fclone_cache are used in the
socket error queue, accessing the sock_exterr_skb structure in skb->cb
via put_cmsg() triggers a usercopy hardening violation:
Stefano Radaelli [Tue, 23 Dec 2025 12:09:39 +0000 (13:09 +0100)]
net: phy: mxl-86110: Add power management and soft reset support
Implement soft_reset, suspend, and resume callbacks using
genphy_soft_reset(), genphy_suspend(), and genphy_resume()
to fix PHY initialization and power management issues.
The soft_reset callback is needed to properly recover the PHY after an
ifconfig down/up cycle. Without it, the PHY can remain in power-down
state, causing MDIO register access failures during config_init().
The soft reset ensures the PHY is operational before configuration.
The suspend/resume callbacks enable proper power management during
system suspend/resume cycles.
Jerry Wu [Thu, 25 Dec 2025 20:36:17 +0000 (20:36 +0000)]
net: mscc: ocelot: Fix crash when adding interface under a lag
Commit 15faa1f67ab4 ("lan966x: Fix crash when adding interface under a lag")
fixed a similar issue in the lan966x driver caused by a NULL pointer dereference.
The ocelot_set_aggr_pgids() function in the ocelot driver has similar logic
and is susceptible to the same crash.
This issue specifically affects the ocelot_vsc7514.c frontend, which leaves
unused ports as NULL pointers. The felix_vsc9959.c frontend is unaffected as
it uses the DSA framework which registers all ports.
Fix this by checking if the port pointer is valid before accessing it.
Fixes: 528d3f190c98 ("net: mscc: ocelot: drop the use of the "lags" array") Signed-off-by: Jerry Wu <w.7erry@foxmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/tencent_75EF812B305E26B0869C673DD1160866C90A@qq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexandre Knecht [Sun, 28 Dec 2025 02:00:57 +0000 (03:00 +0100)]
bridge: fix C-VLAN preservation in 802.1ad vlan_tunnel egress
When using an 802.1ad bridge with vlan_tunnel, the C-VLAN tag is
incorrectly stripped from frames during egress processing.
br_handle_egress_vlan_tunnel() uses skb_vlan_pop() to remove the S-VLAN
from hwaccel before VXLAN encapsulation. However, skb_vlan_pop() also
moves any "next" VLAN from the payload into hwaccel:
/* move next vlan tag to hw accel tag */
__skb_vlan_pop(skb, &vlan_tci);
__vlan_hwaccel_put_tag(skb, vlan_proto, vlan_tci);
For QinQ frames where the C-VLAN sits in the payload, this moves it to
hwaccel where it gets lost during VXLAN encapsulation.
Fix by calling __vlan_hwaccel_clear_tag() directly, which clears only
the hwaccel S-VLAN and leaves the payload untouched.
This path is only taken when vlan_tunnel is enabled and tunnel_info
is configured, so 802.1Q bridges are unaffected.
Tested with 802.1ad bridge + VXLAN vlan_tunnel, verified C-VLAN
preserved in VXLAN payload via tcpdump.
Fixes: 11538d039ac6 ("bridge: vlan dst_metadata hooks in ingress and egress paths") Signed-off-by: Alexandre Knecht <knecht.alexandre@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20251228020057.2788865-1-knecht.alexandre@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Markus Blöchl [Sun, 28 Dec 2025 15:52:59 +0000 (16:52 +0100)]
net: bnge: add AUXILIARY_BUS to Kconfig dependencies
The build can currently fail with
ld: drivers/net/ethernet/broadcom/bnge/bnge_auxr.o: in function `bnge_rdma_aux_device_add':
bnge_auxr.c:(.text+0x366): undefined reference to `__auxiliary_device_add'
ld: drivers/net/ethernet/broadcom/bnge/bnge_auxr.o: in function `bnge_rdma_aux_device_init':
bnge_auxr.c:(.text+0x43c): undefined reference to `auxiliary_device_init'
if BNGE is enabled but no other driver pulls in AUXILIARY_BUS.
Select AUXILIARY_BUS in BNGE like in all other drivers which create
an auxiliary_device.
netfilter: nf_conncount: update last_gc only when GC has been performed
Currently last_gc is being updated everytime a new connection is
tracked, that means that it is updated even if a GC wasn't performed.
With a sufficiently high packet rate, it is possible to always bypass
the GC, causing the list to grow infinitely.
Update the last_gc value only when a GC has been actually performed.
Zilin Guan [Wed, 24 Dec 2025 12:48:26 +0000 (12:48 +0000)]
netfilter: nf_tables: fix memory leak in nf_tables_newrule()
In nf_tables_newrule(), if nft_use_inc() fails, the function jumps to
the err_release_rule label without freeing the allocated flow, leading
to a memory leak.
Fix this by adding a new label err_destroy_flow and jumping to it when
nft_use_inc() fails. This ensures that the flow is properly released
in this error case.
Daniel Gomez [Fri, 19 Dec 2025 05:13:20 +0000 (06:13 +0100)]
netfilter: replace -EEXIST with -EBUSY
The -EEXIST error code is reserved by the module loading infrastructure
to indicate that a module is already loaded. When a module's init
function returns -EEXIST, userspace tools like kmod interpret this as
"module already loaded" and treat the operation as successful, returning
0 to the user even though the module initialization actually failed.
Replace -EEXIST with -EBUSY to ensure correct error reporting in the module
initialization path.
netfilter: nft_synproxy: avoid possible data-race on update operation
During nft_synproxy eval we are reading nf_synproxy_info struct which
can be modified on update operation concurrently. As nf_synproxy_info
struct fits in 32 bits, use READ_ONCE/WRITE_ONCE annotations.
netfilter: nft_set_pipapo: fix range overlap detection
set->klen has to be used, not sizeof(). The latter only compares a
single register but a full check of the entire key is needed.
Example:
table ip t {
map s {
typeof iifname . ip saddr : verdict
flags interval
}
}
nft add element t s '{ "lo" . 10.0.0.0/24 : drop }' # no error, expected
nft add element t s '{ "lo" . 10.0.0.0/24 : drop }' # no error, expected
nft add element t s '{ "lo" . 10.0.0.0/8 : drop }' # bug: no error
The 3rd 'add element' should be rejected via -ENOTEMPTY, not -EEXIST,
so userspace / nft can report an error to the user.
The latter is only correct for the 2nd case (re-add of existing element).
As-is, userspace is told that the command was successful, but no elements were
added.
After this patch, 3rd command gives:
Error: Could not process rule: File exists
add element t s { "lo" . 127.0.0.0/8 . "lo" : drop }
^^^^^^^^^^^^^^^^^^^^^^^^^
Fixes: 0eb4b5ee33f2 ("netfilter: nft_set_pipapo: Separate partial and complete overlap cases on insertion") Signed-off-by: Florian Westphal <fw@strlen.de>
Linus Torvalds [Tue, 30 Dec 2025 16:45:58 +0000 (08:45 -0800)]
Merge tag 'net-6.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth and WiFi. Notably this includes the fix
for the iwlwifi issue you reported.
Current release - regressions:
- core: avoid prefetching NULL pointers
- wifi:
- iwlwifi: implement settime64 as stub for MVM/MLD PTP
- mac80211: fix list iteration in ieee80211_add_virtual_monitor()
- handshake: fix null-ptr-deref in handshake_complete()
- eth: mana: fix use-after-free in reset service rescan path
Previous releases - regressions:
- openvswitch: avoid needlessly taking the RTNL on vport destroy
- dsa: properly keep track of conduit reference
- ipv4:
- fix error route reference count leak with nexthop objects
- fib: restore ECMP balance from loopback
- mptcp: ensure context reset on disconnect()
- bluetooth: fix potential UaF in btusb
- nfc: fix deadlock between nfc_unregister_device and
rfkill_fop_write
- eth:
- gve: defer interrupt enabling until NAPI registration
- i40e: fix scheduling in set_rx_mode
- macb: relocate mog_init_rings() callback from macb_mac_link_up()
to macb_open()
- rtl8150: fix memory leak on usb_submit_urb() failure
- wifi: 8192cu: fix tid out of range in rtl92cu_tx_fill_desc()
Previous releases - always broken:
- ip6_gre: make ip6gre_header() robust
- ipv6: fix a BUG in rt6_get_pcpu_route() under PREEMPT_RT
- af_unix: don't post cmsg for SO_INQ unless explicitly asked for
- phy: mediatek: fix nvmem cell reference leak in
mt798x_phy_calibration
- wifi: mac80211: discard beacon frames to non-broadcast address
- eth:
- iavf: fix off-by-one issues in iavf_config_rss_reg()
- stmmac: fix the crash issue for zero copy XDP_TX action
- team: fix check for port enabled when priority changes"
* tag 'net-6.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
ipv6: fix a BUG in rt6_get_pcpu_route() under PREEMPT_RT
net: rose: fix invalid array index in rose_kill_by_device()
net: enetc: do not print error log if addr is 0
net: macb: Relocate mog_init_rings() callback from macb_mac_link_up() to macb_open()
selftests: fib_test: Add test case for ipv4 multi nexthops
net: fib: restore ECMP balance from loopback
selftests: fib_nexthops: Add test cases for error routes deletion
ipv4: Fix reference count leak when using error routes with nexthop objects
net: usb: sr9700: fix incorrect command used to write single register
ipv6: BUG() in pskb_expand_head() as part of calipso_skbuff_setattr()
usbnet: avoid a possible crash in dql_completed()
gve: defer interrupt enabling until NAPI registration
net: stmmac: fix the crash issue for zero copy XDP_TX action
octeontx2-pf: fix "UBSAN: shift-out-of-bounds error"
af_unix: don't post cmsg for SO_INQ unless explicitly asked for
net: mana: Fix use-after-free in reset service rescan path
net: avoid prefetching NULL pointers
net: bridge: Describe @tunnel_hash member in net_bridge_vlan_group struct
net: nfc: fix deadlock between nfc_unregister_device and rfkill_fop_write
net: usb: asix: validate PHY address before use
...
Jiayuan Chen [Tue, 23 Dec 2025 05:14:12 +0000 (13:14 +0800)]
ipv6: fix a BUG in rt6_get_pcpu_route() under PREEMPT_RT
On PREEMPT_RT kernels, after rt6_get_pcpu_route() returns NULL, the
current task can be preempted. Another task running on the same CPU
may then execute rt6_make_pcpu_route() and successfully install a
pcpu_rt entry. When the first task resumes execution, its cmpxchg()
in rt6_make_pcpu_route() will fail because rt6i_pcpu is no longer
NULL, triggering the BUG_ON(prev). It's easy to reproduce it by adding
mdelay() after rt6_get_pcpu_route().
Using preempt_disable/enable is not appropriate here because
ip6_rt_pcpu_alloc() may sleep.
Fix this by handling the cmpxchg() failure gracefully on PREEMPT_RT:
free our allocation and return the existing pcpu_rt installed by
another task. The BUG_ON is replaced by WARN_ON_ONCE for non-PREEMPT_RT
kernels where such races should not occur.
Pwnverse [Mon, 22 Dec 2025 21:22:27 +0000 (21:22 +0000)]
net: rose: fix invalid array index in rose_kill_by_device()
rose_kill_by_device() collects sockets into a local array[] and then
iterates over them to disconnect sockets bound to a device being brought
down.
The loop mistakenly indexes array[cnt] instead of array[i]. For cnt <
ARRAY_SIZE(array), this reads an uninitialized entry; for cnt ==
ARRAY_SIZE(array), it is an out-of-bounds read. Either case can lead to
an invalid socket pointer dereference and also leaks references taken
via sock_hold().
Wei Fang [Mon, 22 Dec 2025 02:26:28 +0000 (10:26 +0800)]
net: enetc: do not print error log if addr is 0
A value of 0 for addr indicates that the IEB_LBCR register does not
need to be configured, as its default value is 0. However, the driver
will print an error log if addr is 0, so this issue needs to be fixed.
Fixes: 50bfd9c06f0f ("net: enetc: set external PHY address in IERB for i.MX94 ENETC") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20251222022628.4016403-1-wei.fang@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xiaolei Wang [Mon, 22 Dec 2025 01:56:24 +0000 (09:56 +0800)]
net: macb: Relocate mog_init_rings() callback from macb_mac_link_up() to macb_open()
In the non-RT kernel, local_bh_disable() merely disables preemption,
whereas it maps to an actual spin lock in the RT kernel. Consequently,
when attempting to refill RX buffers via netdev_alloc_skb() in
macb_mac_link_up(), a deadlock scenario arises as follows:
WARNING: possible circular locking dependency detected 6.18.0-08691-g2061f18ad76e #39 Not tainted
------------------------------------------------------
kworker/0:0/8 is trying to acquire lock: ffff00080369bbe0 (&bp->lock){+.+.}-{3:3}, at: macb_start_xmit+0x808/0xb7c
but task is already holding lock: ffff000803698e58 (&queue->tx_ptr_lock){+...}-{3:3}, at: macb_start_xmit
+0x148/0xb7c
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
Notably, invoking the mog_init_rings() callback upon link establishment
is unnecessary. Instead, we can exclusively call mog_init_rings() within
the ndo_open() callback. This adjustment resolves the deadlock issue.
Furthermore, since MACB_CAPS_MACB_IS_EMAC cases do not use mog_init_rings()
when opening the network interface via at91ether_open(), moving
mog_init_rings() to macb_open() also eliminates the MACB_CAPS_MACB_IS_EMAC
check.
Fixes: 633e98a711ac ("net: macb: use resolved link config in mac_link_up()") Cc: stable@vger.kernel.org Suggested-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Link: https://patch.msgid.link/20251222015624.1994551-1-xiaolei.wang@windriver.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vadim Fedorenko [Sun, 21 Dec 2025 19:26:39 +0000 (19:26 +0000)]
selftests: fib_test: Add test case for ipv4 multi nexthops
The test checks that with multi nexthops route the preferred route is the
one which matches source ip. In case when source ip is on dummy
interface, it checks that the routes are balanced.
Vadim Fedorenko [Sun, 21 Dec 2025 19:26:38 +0000 (19:26 +0000)]
net: fib: restore ECMP balance from loopback
Preference of nexthop with source address broke ECMP for packets with
source addresses which are not in the broadcast domain, but rather added
to loopback/dummy interfaces. Original behaviour was to balance over
nexthops while now it uses the latest nexthop from the group. To fix the
issue introduce next hop scoring system where next hops with source
address equal to requested will always have higher priority.
For the case with 198.51.100.1/32 assigned to dummy0 and routed using
192.0.2.0/24 and 203.0.113.0/24 networks:
2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether d6:54:8a:ff:78:f5 brd ff:ff:ff:ff:ff:ff
inet 198.51.100.1/32 scope global dummy0
valid_lft forever preferred_lft forever
7: veth1@if6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 06:ed:98:87:6d:8a brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet 192.0.2.2/24 scope global veth1
valid_lft forever preferred_lft forever
inet6 fe80::4ed:98ff:fe87:6d8a/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
9: veth3@if8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether ae:75:23:38:a0:d2 brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet 203.0.113.2/24 scope global veth3
valid_lft forever preferred_lft forever
inet6 fe80::ac75:23ff:fe38:a0d2/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
~ ip ro list:
default
nexthop via 192.0.2.1 dev veth1 weight 1
nexthop via 203.0.113.1 dev veth3 weight 1
192.0.2.0/24 dev veth1 proto kernel scope link src 192.0.2.2
203.0.113.0/24 dev veth3 proto kernel scope link src 203.0.113.2
before:
for i in {1..255} ; do ip ro get 10.0.0.$i; done | grep veth | awk ' {print $(NF-2)}' | sort | uniq -c:
255 veth3
after:
for i in {1..255} ; do ip ro get 10.0.0.$i; done | grep veth | awk ' {print $(NF-2)}' | sort | uniq -c:
122 veth1
133 veth3
Fixes: 32607a332cfe ("ipv4: prefer multipath nexthop that matches source address") Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20251221192639.3911901-1-vadim.fedorenko@linux.dev Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ido Schimmel [Sun, 21 Dec 2025 14:48:28 +0000 (16:48 +0200)]
ipv4: Fix reference count leak when using error routes with nexthop objects
When a nexthop object is deleted, it is marked as dead and then
fib_table_flush() is called to flush all the routes that are using the
dead nexthop.
The current logic in fib_table_flush() is to only flush error routes
(e.g., blackhole) when it is called as part of network namespace
dismantle (i.e., with flush_all=true). Therefore, error routes are not
flushed when their nexthop object is deleted:
# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip route add 198.51.100.1/32 nhid 1
# ip route add blackhole 198.51.100.2/32 nhid 1
# ip nexthop del id 1
# ip route show
blackhole 198.51.100.2 nhid 1 dev dummy1
As such, they keep holding a reference on the nexthop object which in
turn holds a reference on the nexthop device, resulting in a reference
count leak:
# ip link del dev dummy1
[ 70.516258] unregister_netdevice: waiting for dummy1 to become free. Usage count = 2
Fix by flushing error routes when their nexthop is marked as dead.
IPv6 does not suffer from this problem.
Fixes: 493ced1ac47c ("ipv4: Allow routes to use nexthop objects") Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Closes: https://lore.kernel.org/netdev/d943f806-4da6-4970-ac28-b9373b0e63ac@I-love.SAKURA.ne.jp/ Reported-by: syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20251221144829.197694-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: usb: sr9700: fix incorrect command used to write single register
This fixes the device failing to initialize with "error reading MAC
address" for me, probably because the incorrect write of NCR_RST to
SR_NCR is not actually resetting the device.
Fixes: c9b37458e95629b1d1171457afdcc1bf1eb7881d ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support") Cc: stable@vger.kernel.org Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com> Link: https://patch.msgid.link/20251221082400.50688-1-enelsonmoore@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Linus Torvalds [Mon, 29 Dec 2025 20:06:44 +0000 (12:06 -0800)]
Merge tag 'kbuild-fixes-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nicolas Schier:
- Revert commit "scripts/clang-tools: Handle included .c files in
gen_compile_commands" which is reported to cause false entries for
some files.
- Fix compilation of dtb specified on command-line without make rule
- mcb: Add missing modpost build support
* tag 'kbuild-fixes-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
mcb: Add missing modpost build support
kbuild: fix compilation of dtb specified on command-line without make rule
Revert "scripts/clang-tools: Handle included .c files in gen_compile_commands"
Linus Torvalds [Mon, 29 Dec 2025 19:40:38 +0000 (11:40 -0800)]
Merge tag 'mm-hotfixes-stable-2025-12-28-21-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"27 hotfixes. 12 are cc:stable, 18 are MM.
There's a patch series from Jiayuan Chen which fixes some
issues with KASAN and vmalloc. Apart from that it's the usual
shower of singletons - please see the respective changelogs
for details"
* tag 'mm-hotfixes-stable-2025-12-28-21-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (27 commits)
mm/ksm: fix pte_unmap_unlock of wrong address in break_ksm_pmd_entry
mm/page_owner: fix memory leak in page_owner_stack_fops->release()
mm/memremap: fix spurious large folio warning for FS-DAX
MAINTAINERS: notify the "Device Memory" community of memory hotplug changes
sparse: update MAINTAINERS info
mm/page_alloc: report 1 as zone_batchsize for !CONFIG_MMU
mm: consider non-anon swap cache folios in folio_expected_ref_count()
rust: maple_tree: rcu_read_lock() in destructor to silence lockdep
mm: memcg: fix unit conversion for K() macro in OOM log
mm: fixup pfnmap memory failure handling to use pgoff
tools/mm/page_owner_sort: fix timestamp comparison for stable sorting
selftests/mm: fix thread state check in uffd-unit-tests
kernel/kexec: fix IMA when allocation happens in CMA area
kernel/kexec: change the prototype of kimage_map_segment()
MAINTAINERS: add ABI headers to KHO and LIVE UPDATE
.mailmap: remove one of the entries for WangYuli
mm/damon/vaddr: fix missing pte_unmap_unlock in damos_va_migrate_pmd_entry()
MAINTAINERS: update one straggling entry for Bartosz Golaszewski
mm/page_alloc: change all pageblocks migrate type on coalescing
mm: leafops.h: correct kernel-doc function param. names
...
Will Rosenberg [Fri, 19 Dec 2025 17:36:37 +0000 (10:36 -0700)]
ipv6: BUG() in pskb_expand_head() as part of calipso_skbuff_setattr()
There exists a kernel oops caused by a BUG_ON(nhead < 0) at
net/core/skbuff.c:2232 in pskb_expand_head().
This bug is triggered as part of the calipso_skbuff_setattr()
routine when skb_cow() is passed headroom > INT_MAX
(i.e. (int)(skb_headroom(skb) + len_delta) < 0).
The root cause of the bug is due to an implicit integer cast in
__skb_cow(). The check (headroom > skb_headroom(skb)) is meant to ensure
that delta = headroom - skb_headroom(skb) is never negative, otherwise
we will trigger a BUG_ON in pskb_expand_head(). However, if
headroom > INT_MAX and delta <= -NET_SKB_PAD, the check passes, delta
becomes negative, and pskb_expand_head() is passed a negative value for
nhead.
Fix the trigger condition in calipso_skbuff_setattr(). Avoid passing
"negative" headroom sizes to skb_cow() within calipso_skbuff_setattr()
by only using skb_cow() to grow headroom.
Fixes: 2917f57b6bc1 ("calipso: Allow the lsm to label the skbuff directly.") Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Will Rosenberg <whrosenb@asu.edu> Acked-by: Paul Moore <paul@paul-moore.com> Link: https://patch.msgid.link/20251219173637.797418-1-whrosenb@asu.edu Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ankit Garg [Fri, 19 Dec 2025 10:29:45 +0000 (10:29 +0000)]
gve: defer interrupt enabling until NAPI registration
Currently, interrupts are automatically enabled immediately upon
request. This allows interrupt to fire before the associated NAPI
context is fully initialized and cause failures like below:
Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto
enablement and explicitly enable the interrupt in NAPI initialization
path (and disable it during NAPI teardown).
This ensures that interrupt lifecycle is strictly coupled with
readiness of NAPI context.
Cc: stable@vger.kernel.org Fixes: 1dfc2e46117e ("gve: Refactor napi add and remove functions") Signed-off-by: Ankit Garg <nktgrg@google.com> Reviewed-by: Jordan Rhee <jordanrhee@google.com> Reviewed-by: Joshua Washington <joshwash@google.com> Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com> Link: https://patch.msgid.link/20251219102945.2193617-1-hramamurthy@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For XDP_TX action, the xdp_buff is converted to xdp_frame by
xdp_convert_buff_to_frame(). The memory type of the resulting xdp_frame
depends on the memory type of the xdp_buff. For page pool based xdp_buff
it produces xdp_frame with memory type MEM_TYPE_PAGE_POOL. For zero copy
XSK pool based xdp_buff it produces xdp_frame with memory type
MEM_TYPE_PAGE_ORDER0. However, stmmac_xdp_xmit_back() does not check the
memory type and always uses the page pool type, this leads to invalid
mappings and causes the crash. Therefore, check the xdp_buff memory type
in stmmac_xdp_xmit_back() to fix this issue.
Paolo Abeni [Mon, 29 Dec 2025 16:04:00 +0000 (17:04 +0100)]
Merge tag 'wireless-2025-12-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Various fixes all over, most are recent regressions but
also some long-standing issues:
- cfg80211:
- fix an issue with overly long SSIDs
- mac80211:
- long-standing beacon protection issue on some devices
- for for a multi-BSSID AP-side issue
- fix a syzbot warning on OCB (not really used in practice)
- remove WARN on connections using disabled channels,
as that can happen due to changes in the disable flag
- fix monitor mode list iteration
- iwlwifi:
- fix firmware loading on certain (really old) devices
- add settime64 to PTP clock to avoid a warning and clock
registration failure, but it's not actually supported
- rtw88:
- remove WQ_UNBOUND since it broke USB adapters
(because it can't be used with WQ_BH)
- fix SDIO issues with certain devices
- rtl8192cu: fix TID array out-of-bounds (since 6.9)
* tag 'wireless-2025-12-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: Implement settime64 as stub for MVM/MLD PTP
wifi: iwlwifi: Fix firmware version handling
wifi: mac80211: ocb: skip rx_no_sta when interface is not joined
wifi: mac80211: do not use old MBSSID elements
wifi: mac80211: don't WARN for connections on invalid channels
wifi: wlcore: ensure skb headroom before skb_push
wifi: cfg80211: sme: store capped length in __cfg80211_connect_result()
wifi: mac80211: fix list iteration in ieee80211_add_virtual_monitor()
wifi: mac80211: Discard Beacon frames to non-broadcast address
Revert "wifi: rtw88: add WQ_UNBOUND to alloc_workqueue users"
wifi: rtlwifi: 8192cu: fix tid out of range in rtl92cu_tx_fill_desc()
wifi: rtw88: limit indirect IO under powered off for RTL8822CS
====================
This patch ensures that the RX ring size (rx_pending) is not
set below the permitted length. This avoids UBSAN
shift-out-of-bounds errors when users passes small or zero
ring sizes via ethtool -G.
Linus Torvalds [Mon, 29 Dec 2025 01:21:36 +0000 (17:21 -0800)]
Merge tag 'sched_ext-for-6.19-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix uninitialized @ret on alloc_percpu() failure leading to
ERR_PTR(0)
- Fix PREEMPT_RT warning when bypass load balancer sends IPI to offline
CPU by using resched_cpu() instead of resched_curr()
- Fix comment referring to renamed function
- Update scx_show_state.py for scx_root and scx_aborting changes
* tag 'sched_ext-for-6.19-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
tools/sched_ext: update scx_show_state.py for scx_aborting change
tools/sched_ext: fix scx_show_state.py for scx_root change
sched_ext: Use the resched_cpu() to replace resched_curr() in the bypass_lb_node()
sched_ext: Fix some comments in ext.c
sched_ext: fix uninitialized ret on alloc_percpu() failure
Linus Torvalds [Mon, 29 Dec 2025 01:19:09 +0000 (17:19 -0800)]
Merge tag 'cgroup-for-6.19-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
- Fix a spurious cpuset warning when disabling remote partition after
CPU hotplug leaves subpartitions_cpus empty. Guard the warning and
invalidate affected partitions.
* tag 'cgroup-for-6.19-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: fix warning when disabling remote partition
Linus Torvalds [Mon, 29 Dec 2025 00:55:16 +0000 (16:55 -0800)]
Merge tag 'v6.19-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Fix UAF in seqiv
- Fix regression in hisilicon
* tag 'v6.19-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hisilicon/qm - fix incorrect judgment in qm_get_complete_eqe_num()
crypto: seqiv - Do not use req->iv after crypto_aead_encrypt
Linus Torvalds [Sun, 28 Dec 2025 18:21:47 +0000 (10:21 -0800)]
Merge tag 'usb-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes, and bunch of reverts for 6.19-rc3.
Included in here are:
- reverts of some typec ucsi driver changes that had a lot of
regression reports after -rc1. Let's just revert it all for now and
it will come back in a way that is better tested.
- other typec bugfixes
- usb-storage quirk fixups
- dwc3 driver fix
- other minor USB fixes for reported problems.
All of these have passed 0-day testing and individual testing"
* tag 'usb-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
Revert "usb: typec: ucsi: Update UCSI structure to have message in and message out fields"
Revert "usb: typec: ucsi: Add support for message out data structure"
Revert "usb: typec: ucsi: Enable debugfs for message_out data structure"
Revert "usb: typec: ucsi: Add support for SET_PDOS command"
Revert "usb: typec: ucsi: Fix null pointer dereference in ucsi_sync_control_common"
Revert "usb: typec: ucsi: Get connector status after enable notifications"
usb: ohci-nxp: clean up probe error labels
usb: gadget: lpc32xx_udc: clean up probe error labels
usb: ohci-nxp: fix device leak on probe failure
usb: phy: isp1301: fix non-OF device reference imbalance
usb: gadget: lpc32xx_udc: fix clock imbalance in error path
usb: typec: ucsi: Get connector status after enable notifications
usb: usb-storage: Maintain minimal modifications to the bcdDevice range.
usb: dwc3: of-simple: fix clock resource leak in dwc3_of_simple_probe
usb: typec: ucsi: Fix null pointer dereference in ucsi_sync_control_common
USB: lpc32xx_udc: Fix error handling in probe
usb: typec: altmodes/displayport: Drop the device reference in dp_altmode_probe()
usb: phy: fsl-usb: Fix use-after-free in delayed work during device removal
usb: renesas_usbhs: Fix a resource leak in usbhs_pipe_malloc()
usb: typec: ucsi: huawei-gaokin: add DRM dependency
...
Linus Torvalds [Sun, 28 Dec 2025 18:14:49 +0000 (10:14 -0800)]
Merge tag 'tty-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are some small serial driver fixes for some reported issues.
Included in here are:
- serial sysfs fwnode fix that was much reported
- sh-sci driver fix
- serial device init bugfix
- 8250 bugfix
- xilinx_uartps bugfix
All of these have passed 0-day testing and individual testing"
* tag 'tty-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: xilinx_uartps: fix rs485 delay_rts_after_send
serial: sh-sci: Check that the DMA cookie is valid
serial: core: Fix serial device initialization
serial: 8250: longson: Fix NULL vs IS_ERR() bug in probe
serial: core: Restore sysfs fwnode information
Linus Torvalds [Sun, 28 Dec 2025 18:11:18 +0000 (10:11 -0800)]
Merge tag 'firewire-fixes-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A fix for PCI driver for Texas Instruments PCILyx series.
The driver had a bug where it allocated a DMA-coherent buffer of 16 KB
but released it using PAGE_SIZE. This disproportion was reported in
2020, but the fix was never merged. It is finally resolved"
* tag 'firewire-fixes-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: nosy: Fix dma_free_coherent() size
Linus Torvalds [Sun, 28 Dec 2025 17:44:26 +0000 (09:44 -0800)]
Merge tag 'riscv-for-linus-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"Nothing exotic here; these are the cleanup and new ISA extension
probing patches (not including CFI):
- Add probing and userspace reporting support for the standard RISC-V
ISA extensions Zilsd and Zclsd, which implement load/store dual
instructions on RV32
- Abstract the register saving code in setup_sigcontext() so it can
be used for stateful RISC-V ISA extensions beyond the vector
extension
- Add the SBI extension ID and some initial data structure
definitions for the RISC-V standard SBI debug trigger extension
- Clean up some code slightly: change some page table functions to
avoid atomic operations oinn !SMP and to avoid unnecessary casts to
atomic_long_t; and use the existing RISCV_FULL_BARRIER macro in
place of some open-coded 'fence rw,rw' instructions"
* tag 'riscv-for-linus-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add SBI debug trigger extension and function ids
riscv/atomic.h: use RISCV_FULL_BARRIER in _arch_atomic* function.
riscv: hwprobe: export Zilsd and Zclsd ISA extensions
riscv: add ISA extension parsing for Zilsd and Zclsd
dt-bindings: riscv: add Zilsd and Zclsd extension descriptions
riscv: mm: use xchg() on non-atomic_long_t variables, not atomic_long_xchg()
riscv: mm: ptep_get_and_clear(): avoid atomic ops when !CONFIG_SMP
riscv: mm: pmdp_huge_get_and_clear(): avoid atomic ops when !CONFIG_SMP
riscv: signal: abstract header saving for setup_sigcontext
Linus Torvalds [Sun, 28 Dec 2025 17:40:09 +0000 (09:40 -0800)]
Merge tag 'powerpc-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix for kexec warning due to SMT disable or partial SMT enabled
- Handle font bitmap pointer with reloc_offset to fix boot crash
- Fix to enable cpuidle state for Power11
- Couple of misc fixes
Thanks to Aboorva Devarajan, Aditya Bodkhe, Cedar Maxwell, Christian
Zigotzky, Christophe Leroy, Christophe Leroy (CS GROUP), Finn Thain,
Gopi Krishna Menon, Guenter Roeck, Jan Stancek, Joe Lawrence, Josh
Poimboeuf, Justin M. Forbes, Madadi Vineeth Reddy, Naveen N Rao (AMD),
Nysal Jan K.A., Sachin P Bappalige, Samir M, Sourabh Jain, Srikar
Dronamraju, and Stan Johnson
* tag 'powerpc-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Restore disabling of interrupts at interrupt/syscall exit
powerpc/powernv: Enable cpuidle state detection for POWER11
powerpc: Add reloc_offset() to font bitmap pointer used for bootx_printf()
powerpc/tools: drop `-o pipefail` in gcc check scripts
selftests/powerpc/pmu/: Add check_extended_reg_test to .gitignore
powerpc/kexec: Enable SMT before waking offline CPUs
Kohei Enju [Fri, 26 Dec 2025 08:46:50 +0000 (17:46 +0900)]
tools/sched_ext: update scx_show_state.py for scx_aborting change
Commit a69040ed57f5 ("sched_ext: Simplify breather mechanism with
scx_aborting flag") removed scx_in_softlockup and scx_breather_depth,
replacing them with scx_aborting.
Kohei Enju [Fri, 26 Dec 2025 08:46:49 +0000 (17:46 +0900)]
tools/sched_ext: fix scx_show_state.py for scx_root change
Commit 48e126777386 ("sched_ext: Introduce scx_sched") introduced
scx_root and removed scx_ops, causing scx_show_state.py to fail when
searching for the 'scx_ops' object. [1]
Fix by using 'scx_root' instead, with NULL pointer handling.
[1]
# drgn -s vmlinux ./tools/sched_ext/scx_show_state.py
Traceback (most recent call last):
File "/root/.venv/bin/drgn", line 8, in <module>
sys.exit(_main())
~~~~~^^
File "/root/.venv/lib64/python3.14/site-packages/drgn/cli.py", line 625, in _main
runpy.run_path(
~~~~~~~~~~~~~~^
script_path, init_globals={"prog": prog}, run_name="__main__"
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
)
^
File "<frozen runpy>", line 287, in run_path
File "<frozen runpy>", line 98, in _run_module_code
File "<frozen runpy>", line 88, in _run_code
File "./tools/sched_ext/scx_show_state.py", line 30, in <module>
ops = prog['scx_ops']
~~~~^^^^^^^^^^^
_drgn.ObjectNotFoundError: could not find 'scx_ops'
Jens Axboe [Thu, 18 Dec 2025 22:21:28 +0000 (15:21 -0700)]
af_unix: don't post cmsg for SO_INQ unless explicitly asked for
A previous commit added SO_INQ support for AF_UNIX (SOCK_STREAM), but it
posts a SCM_INQ cmsg even if just msg->msg_get_inq is set. This is
incorrect, as ->msg_get_inq is just the caller asking for the remainder
to be passed back in msg->msg_inq, it has nothing to do with cmsg. The
original commit states that this is done to make sockets
io_uring-friendly", but it's actually incorrect as io_uring doesn't use
cmsg headers internally at all, and it's actively wrong as this means
that cmsg's are always posted if someone does recvmsg via io_uring.
Fix that up by only posting a cmsg if u->recvmsg_inq is set.
Additionally, mirror how TCP handles inquiry handling in that it should
only be done for a successful return. This makes the logic for the two
identical.
Dipayaan Roy [Thu, 18 Dec 2025 13:10:54 +0000 (05:10 -0800)]
net: mana: Fix use-after-free in reset service rescan path
When mana_serv_reset() encounters -ETIMEDOUT or -EPROTO from
mana_gd_resume(), it performs a PCI rescan via mana_serv_rescan().
mana_serv_rescan() calls pci_stop_and_remove_bus_device(), which can
invoke the driver's remove path and free the gdma_context associated
with the device. After returning, mana_serv_reset() currently jumps to
the out label and attempts to clear gc->in_service, dereferencing a
freed gdma_context.
The issue was observed with the following call logs:
[ 698.942636] BUG: unable to handle page fault for address: ff6c2b638088508d
[ 698.943121] #PF: supervisor write access in kernel mode
[ 698.943423] #PF: error_code(0x0002) - not-present page
[S[ 698.943793] Pat Dec 6 07:GD5 100000067 P4D 1002f7067 PUD 1002f8067 PMD 101bef067 PTE 0
0:56 2025] hv_[n e 698.944283] Oops: Oops: 0002 [#1] SMP NOPTI
tvsc f8615163-00[ 698.944611] CPU: 28 UID: 0 PID: 249 Comm: kworker/28:1
...
[Sat Dec 6 07:50:56 2025] R10: [ 699.121594] mana 7870:00:00.0 enP30832s1: Configured vPort 0 PD 18 DB 16 000000000000001b R11: 0000000000000000 R12: ff44cf3f40270000
[Sat Dec 6 07:50:56 2025] R13: 0000000000000001 R14: ff44cf3f402700c8 R15: ff44cf3f4021b405
[Sat Dec 6 07:50:56 2025] FS: 0000000000000000(0000) GS:ff44cf7e9fcf9000(0000) knlGS:0000000000000000
[Sat Dec 6 07:50:56 2025] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[Sat Dec 6 07:50:56 2025] CR2: ff6c2b638088508d CR3: 000000011fe43001 CR4: 0000000000b73ef0
[Sat Dec 6 07:50:56 2025] Call Trace:
[Sat Dec 6 07:50:56 2025] <TASK>
[Sat Dec 6 07:50:56 2025] mana_serv_func+0x24/0x50 [mana]
[Sat Dec 6 07:50:56 2025] process_one_work+0x190/0x350
[Sat Dec 6 07:50:56 2025] worker_thread+0x2b7/0x3d0
[Sat Dec 6 07:50:56 2025] kthread+0xf3/0x200
[Sat Dec 6 07:50:56 2025] ? __pfx_worker_thread+0x10/0x10
[Sat Dec 6 07:50:56 2025] ? __pfx_kthread+0x10/0x10
[Sat Dec 6 07:50:56 2025] ret_from_fork+0x21a/0x250
[Sat Dec 6 07:50:56 2025] ? __pfx_kthread+0x10/0x10
[Sat Dec 6 07:50:56 2025] ret_from_fork_asm+0x1a/0x30
[Sat Dec 6 07:50:56 2025] </TASK>
Fix this by returning immediately after mana_serv_rescan() to avoid
accessing GC state that may no longer be valid.
net: nfc: fix deadlock between nfc_unregister_device and rfkill_fop_write
A deadlock can occur between nfc_unregister_device() and rfkill_fop_write()
due to lock ordering inversion between device_lock and rfkill_global_mutex.
The problematic lock order is:
Thread A (rfkill_fop_write):
rfkill_fop_write()
mutex_lock(&rfkill_global_mutex)
rfkill_set_block()
nfc_rfkill_set_block()
nfc_dev_down()
device_lock(&dev->dev) <- waits for device_lock
Thread B (nfc_unregister_device):
nfc_unregister_device()
device_lock(&dev->dev)
rfkill_unregister()
mutex_lock(&rfkill_global_mutex) <- waits for rfkill_global_mutex
This creates a classic ABBA deadlock scenario.
Fix this by moving rfkill_unregister() and rfkill_destroy() outside the
device_lock critical section. Store the rfkill pointer in a local variable
before releasing the lock, then call rfkill_unregister() after releasing
device_lock.
This change is safe because rfkill_fop_write() holds rfkill_global_mutex
while calling the rfkill callbacks, and rfkill_unregister() also acquires
rfkill_global_mutex before cleanup. Therefore, rfkill_unregister() will
wait for any ongoing callback to complete before proceeding, and
device_del() is only called after rfkill_unregister() returns, preventing
any use-after-free.
The similar lock ordering in nfc_register_device() (device_lock ->
rfkill_global_mutex via rfkill_register) is safe because during
registration the device is not yet in rfkill_list, so no concurrent
rfkill operations can occur on this device.
The ASIX driver reads the PHY address from the USB device via
asix_read_phy_addr(). A malicious or faulty device can return an
invalid address (>= PHY_MAX_ADDR), which causes a warning in
mdiobus_get_phy():
addr 207 out of range
WARNING: drivers/net/phy/mdio_bus.c:76
Validate the PHY address in asix_read_phy_addr() and remove the
now-redundant check in ax88172a.c.
Reported-by: syzbot+3d43c9066a5b54902232@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=3d43c9066a5b54902232 Tested-by: syzbot+3d43c9066a5b54902232@syzkaller.appspotmail.com Fixes: 7e88b11a862a ("net: usb: asix: refactor asix_read_phy_addr() and handle errors on return") Link: https://lore.kernel.org/all/20251217085057.270704-1-kartikey406@gmail.com/T/ Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20251218011156.276824-1-kartikey406@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mcb bus is not prepared to autoload client drivers with the data defined on
the drivers' MODULE_DEVICE_TABLE. modpost cannot access to mcb_table_id
inside MODULE_DEVICE_TABLE so the data declared inside is ignored.
Add modpost build support for accessing to the mcb_table_id coded on device
drivers' MODULE_DEVICE_TABLE.
Fixes: 3764e82e5150 ("drivers: Introduce MEN Chameleon Bus") Reviewed-by: Jorge Sanjuan Garcia <dev-jorge.sanjuangarcia@duagon.com> Signed-off-by: Jose Javier Rodriguez Barbarin <dev-josejavier.rodriguez@duagon.com> Acked-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Link: https://patch.msgid.link/20251202084200.10410-1-dev-josejavier.rodriguez@duagon.com Signed-off-by: Nicolas Schier <nsc@kernel.org>
kbuild: fix compilation of dtb specified on command-line without make rule
Since commit e7e2941300d2 ("kbuild: split device tree build rules into
scripts/Makefile.dtbs"), it is no longer possible to compile a device tree
blob that is not specified in a make rule
like:
dtb-$(CONFIG_FOO) += foo.dtb
Before the mentioned commit, one could copy a dts file to e.g.
arch/arm64/boot/dts/ (or a new subdirectory) and then convert it to a dtb
file using:
make ARCH=arm64 foo.dtb
In this scenario, both 'dtb-y' and 'dtb-' are empty, and the inclusion of
scripts/Makefile.dtbs relies on 'targets' to contain the MAKECMDGOALS. The
value of 'targets', however, is only final later in the code.
Move the conditional include of scripts/Makefile.dtbs down to where the
value of 'targets' is final. Since Makefile.dtbs updates 'always-y' which is
used as a prerequisite in the build rule, the build rule also needs to move
down.
Fixes: e7e2941300d2 ("kbuild: split device tree build rules into scripts/Makefile.dtbs") Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20251126100017.1162330-1-thomas.de_schampheleire@nokia.com Signed-off-by: Nicolas Schier <nsc@kernel.org>
Dmitry Vyukov reported that commit 9362d34acf91 ("scripts/clang-tools:
Handle included .c files in gen_compile_commands") generates false
entries in some cases for C files that are included in other C files but
not meant for standalone compilation.
For properly supporting clangd, including .c files is discouraged.
Reported-by: Dmitry Vyukov <dvyukov@google.com> Closes: https://lore.kernel.org/r/CACT4Y+Z8aCz0XcoJx9XXPHZSZHxGF8Kx9iUbFarhpTSEPDhMfg@mail.gmail.com Acked-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 9362d34acf91 ("scripts/clang-tools: Handle included .c files in gen_compile_commands") Link: https://patch.msgid.link/20251217-revert-scripts-clang-rools-handle-included-c-files-v1-1-def5651446da@kernel.org Signed-off-by: Nicolas Schier <nsc@kernel.org>
projects / ceph-client.git / log