Andrew Schoen [Tue, 16 Oct 2018 15:20:54 +0000 (10:20 -0500)]
validate: check the version of python-notario
If the version of python-notario is < 0.0.13 an error message is given
like "TypeError: validate() got an unexpected keyword argument
'defined_keys'", which is not helpful in figuring
out you've got an incorrect version of python-notario.
This check will avoid that situation by telling the user that they need
to upgrade python-notario before they hit that error.
- fix a typo in vagrant_variables that cause a networking issue for
containerized scenario.
- add containerized_deployment: true
- remove a useless block of code: the fact docker_exec_cmd is set in
ceph-defaults which is played right after.
Sébastien Han [Thu, 24 May 2018 17:47:29 +0000 (10:47 -0700)]
infra: add a gather-ceph-logs.yml playbook
Add a gather-ceph-logs.yml which will log onto all the machines from
your inventory and will gather ceph logs. This is not intended to work
on containerized environments since the logs are stored in journald.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1582280 Signed-off-by: Sébastien Han <seb@redhat.com>
Sébastien Han [Thu, 27 Sep 2018 14:31:22 +0000 (16:31 +0200)]
infra: rename osd-configure to add-osd and improve it
The playbook has various improvements:
* run ceph-validate role before doing anything
* run ceph-fetch-keys only on the first monitor of the inventory list
* set noup flag so PGs get distributed once all the new OSDs have been
added to the cluster and unset it when they are up and running
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1624962 Signed-off-by: Sébastien Han <seb@redhat.com>
Sébastien Han [Thu, 27 Sep 2018 14:29:22 +0000 (16:29 +0200)]
ceph-fetch-keys: refact
This commits simplies the usage of the ceph-fetch-keys role. The role
now has a nicer way to find various ceph keys and fetch them on the
ansible server.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1624962 Signed-off-by: Sébastien Han <seb@redhat.com>
Andy McCrae [Fri, 5 Oct 2018 13:36:36 +0000 (14:36 +0100)]
Add ability to use a different client container
Currently a throw-away container is built to run ceph client
commands to setup users, pools & auth keys. This utilises
the same base ceph container which has all the ceph services
inside it.
This PR allows the use of a separate container if the deployer
wishes - but defaults to use the same full ceph container.
This can be used for different architectures or distributions,
which may support the the Ceph client, but not Ceph server,
and allows the deployer to build and specify a separate client
container if need be.
Signed-off-by: Andy McCrae <andy.mccrae@gmail.com>
infra: fix wrong condition on firewalld start task
a non skipped task won't have the `skipped` attribute, so `start
firewalld` task will complain about that.
Indeed, `skipped` and `rc` attributes won't exist since the first task
`check firewalld installation on redhat or suse` won't be skipped in
case of non-containerized deployment.
binhong.hua [Wed, 10 Oct 2018 15:24:30 +0000 (23:24 +0800)]
vagrantfile: remove disk path of OSD nodes
osd node's disks will remain on vagrant host,when run "vagrant destroy",
because we use time as a part of disk path, and time on delete not equal time on create.
we already use random_hostname in Libvirt backend,it will create disk
use the hostname as a part of diskname. for example: vagrant_osd2_1539159988_065f15e3e1fa6ceb0770-hda.qcow2.
`ceph_osd_container_stat` might not be set on other osd node.
We must ensure we are on the last node before trying to evaluate
`ceph_osd_container_stat`.
Sébastien Han [Tue, 2 Oct 2018 15:37:06 +0000 (17:37 +0200)]
ceph-handler: change osd container check
Now that the container is named ceph-osd@<id> looking for something that
contains a host is not necessary. This is also backward compatible as it
will continue to match container names with hostname in them.
Sébastien Han [Fri, 28 Sep 2018 16:07:08 +0000 (18:07 +0200)]
osd: ceph-volume activate, just pass the OSD_ID
We don't need to pass the device and discover the OSD ID. We have a
task that gathers all the OSD ID present on that machine, so we simply
re-use them and activate them. This also handles the situation when you
have multiple OSDs running on the same device.
Sébastien Han [Fri, 28 Sep 2018 11:06:18 +0000 (13:06 +0200)]
ceph_volume: add container support for batch command
The batch option got recently added, while rebasing this patch it was
necessary to implement it. So now, the batch option can work on
containerized environments.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1630977 Signed-off-by: Sébastien Han <seb@redhat.com>
Andrew Schoen [Tue, 9 Oct 2018 14:04:51 +0000 (10:04 -0400)]
ceph-validate: remove versions checks for bluestore and lvm scenario
These checks will never pass unless ceph_stable_release is passed and
ceph-defaults is run before ceph-validate. Additionally, we don't want
to support deploying jewel upstream at ceph-ansible master.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1637537 Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Andrew Schoen [Mon, 1 Oct 2018 17:51:47 +0000 (12:51 -0500)]
ceph-volume: make the batch action idempotent
The command is run with --report first to see if any OSDs will be
created or not. If they will be, then the command is run. If not, then
changed is set to False and the module exits.
Sébastien Han [Mon, 8 Oct 2018 13:45:58 +0000 (09:45 -0400)]
site: use default value for 'cluster' variable
If someone's cluster name is 'ceph' then the playbook will fail (with no
errors because of ignore_errors) saying it can not find the variable. So
let's declare the default. If the cluster name is different then it'll
be in group_vars and thus there won't be any failre.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1636962 Signed-off-by: Sébastien Han <seb@redhat.com>
Sébastien Han [Wed, 3 Oct 2018 11:39:35 +0000 (13:39 +0200)]
switch: copy initial mon keyring
We need to copy this key into /etc/ceph so when ceph-docker-common runs
it can fetch it to the ansible server. Previously the task wasn't not
failing because `fail_on_missing` was False before 2.5, so now it's True
hence the failure.
switch: support migration when cluster is scrubbing
Similar to c13a3c3 we must allow scrubbing when running this playbook.
In cluster with a large number of PGs, it can be expected some of them
scrubbing, it's a normal operation.
Preventing from scrubbing operation force to set noscrub flag.
This commit allows to switch from non containerized to containerized
environment even while PGs are scrubbing.
'ansible.vars.hostvars.HostVarsVars object' has no attribute u'ansible_interface'
```
the reason is that it will assume `monitor_address_block` isn't defined even on
ceph-mon2 because looking for `monitor_address_block` instead of
`hostvars[host]['monitor_address_block']`, therefore it enters in the condition as default value:
`monitor_interface` is set with default value `'interface'` so the `interface`
variable is built with 'ansible_' + 'interface'. It makes ansible throwing a
confusing message about `'ansible_interface'`.
Allow user to choose between timesyncd, chronyd and ntpd
Installation will default to timesyncd since it is distributed as
part of the systemd installation for most distros.
Added note indicating NTP daemon type is not used for containerized
deployments.
Fixes issue #3086 on Github
Signed-off-by: Benjamin Cherian <benjamin_cherian@amat.com>
Mike Christie [Fri, 28 Sep 2018 21:23:10 +0000 (16:23 -0500)]
igw: valid client CHAP settings.
The linux kernel target layer, LIO, does not support the iscsi target to
mix ACLs that have chap enabled and disabled under the same tpg. This
patch adds a check and fails if this type of setup is detected.
This fixes Red Hat BZ:
https://bugzilla.redhat.com/show_bug.cgi?id=1615088
Signed-off-by: Mike Christie <mchristi@redhat.com>
Sébastien Han [Fri, 27 Jul 2018 14:56:09 +0000 (16:56 +0200)]
add ceph-handler role
The role contains all the handlers for Ceph services. We decided to
leave ceph-defaults role with variables and a few facts only. This is
useful when organizing the site.yml files and also adding the known
variables to infrastructure-playbooks.
Sébastien Han [Thu, 27 Sep 2018 07:57:26 +0000 (09:57 +0200)]
default: use bluestore as default object store
All tooling in Ceph is defaulting to use the bluestore objectstore for provisioning OSDs, there is no good reason for ceph-ansible to continue to default to filestore.
Closes: https://github.com/ceph/ceph-ansible/issues/3149 Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1633508 Signed-off-by: Sébastien Han <seb@redhat.com>
This commit brings back this condition which is essential to ensure we
won't hit a false positive result in the `when` condition for the check
PGs task.
upgrade: consider all 'active+clean' states as valid pgs
In cluster with a large number of PGs, it can be expected some of them
scrubbing, it's a normal operation.
Preventing from scrubbing operation force to set noscrub flag before a
rolling update which is a problem because it pauses an important data
integrity operation until the end of the rolling upgrade.
This commit allows an upgrade even while PGs are scrubbing.
tests: add an RGW node on osd0 for ooo-collocation
get more coverage by adding an RGW daemon collocated on osd0.
We've missed a bug in the past which could have been caught earlier in
the CI.
Let's add this additional daemon in order to have a better coverage.
Matthew Vernon [Wed, 19 Sep 2018 12:26:26 +0000 (13:26 +0100)]
restart_osd_daemon.sh.j2 - consider active+clean+* pgs as OK
After restarting each OSD, restart_osd_daemon.sh checks that the
cluster is in a good state before moving on to the next one. One of
the checks it does is that the number of pgs in the state
"active+clean" is equal to the total number of pgs in the cluster.
On large clusters (e.g. we have 173,696 pgs), it is likely that at
least one pg will be scrubbing and/or deep-scrubbing at any one
time. These pgs are in state "active+clean+scrubbing" or
"active+clean+scrubbing+deep", so the script was erroneously not
including them in the "good" count. Similar concerns apply to
"active+clean+snaptrim" and "active+clean+snaptrim_wait".
Fix this by considering as good any pg whose state contains
active+clean. Do this as an integer comparison to num_pgs in pgmap.
(could this be backported to at least stable-3.0 please?)
Closes: #2008 Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
Matthew Vernon [Fri, 21 Sep 2018 16:55:01 +0000 (17:55 +0100)]
restart_osd_daemon.sh.j2 - Reset RETRIES between calls of check_pgs
Previously RETRIES was set (by default to 40) once at the start of the
script; this meant that it would only ever wait for up to 40 lots of
30s across *all* the OSDs on a host before bombing out. In fact, we
want to be prepared to wait for the same amount of time after each OSD
restart for the clusters' pgs to be happy again before continuing.
Closes: #3154 Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
In case of an OpenStack "box", the Vagrantfile intend to check the
existence of os_networks and os_floating_ip_pool settings in
vagrant_variables.yml and pass them to the provider if they are set.
Due to two typos in the Vagrantfile this is not working as it checks the
wrong variable names.
This commit fixes the typos so these settings can be used.
Andrew Schoen [Tue, 18 Sep 2018 20:12:59 +0000 (15:12 -0500)]
ceph-config: calculate num_osds for the lvm batch scenario
For now our best guess is to count the number of devices and multiply
by osds_per_device. Ideally we'd like to run ceph-volume lvm batch
--report and get the number of OSDs that way, but currently we need
a ceph.conf in place already before we can do that. There is a tracker
ticket that would allow os to get around the need for a ceph.conf:
http://tracker.ceph.com/issues/36088
Fixes: https://github.com/ceph/ceph-ansible/issues/3135 Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Andrew Schoen [Tue, 18 Sep 2018 14:36:08 +0000 (09:36 -0500)]
ceph-config: default devices and lvm_volumes when setting num_osds
This avoids errors when the osd scenario choosen does not require
setting devices or lvm_volumes. The default values for these are not
set because they exist in the ceph-osd role, not ceph-defaults.
BlueStore's cache is sized conservatively by default, so that it does
not overwhelm under-provisioned servers. The default is 1G for HDD, and
3G for SSD.
To replace the page cache, as much memory as possible should be given to
BlueStore. This is required for good performance. Since ceph-ansible
knows how much memory a host has, it can set
`bluestore cache size = max(total host memory / num OSDs on this host * safety
factor, 1G)`
Due to fragmentation and other memory use not included in bluestore's
cache, a safety factor of 0.5 for dedicated nodes and 0.2 for
hyperconverged nodes is recommended.
- Adds loop in bash to satisfy the 1:n relation between `osd_hosts` and the
different device lists.
- Fixes some container name which were using the host hostname instead
of the actual container one.
installs the cli package but does not start and enable the
rbd-target-api daemon needed for gwcli to communicate with the igw
nodes. This patch just enables and starts it for the non-container
setup. The container setup is already doing this.
This fixes bz https://bugzilla.redhat.com/show_bug.cgi?id=1613963
Signed-off-by: Mike Christie <mchristi@redhat.com>
projects / ceph-ansible.git / log