rxrpc: proc: size address buffers for %pISpc output
The AF_RXRPC procfs helpers format local and remote socket addresses into
fixed 50-byte stack buffers with "%pISpc".
That is too small for the longest current-tree IPv6-with-port form the
formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a
dotted-quad tail not only for v4mapped addresses, but also for ISATAP
addresses via ipv6_addr_is_isatap().
is possible with the current formatter. That is 50 visible characters, so
51 bytes including the trailing NUL, which does not fit in the existing
char[50] buffers used by net/rxrpc/proc.c.
Size the buffers from the formatter's maximum textual form and switch the
call sites to scnprintf().
Changes since v1:
- correct the changelog to cite the actual maximum current-tree case
explicitly
- frame the proof around the ISATAP formatting path instead of the earlier
mapped-v4 example
Fixes: 75b54cb57ca3 ("rxrpc: Add IPv6 support") Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn> Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Anderson Nascimento <anderson@allelesecurity.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org Link: https://patch.msgid.link/20260408121252.2249051-22-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wang Jie [Wed, 8 Apr 2026 12:12:48 +0000 (13:12 +0100)]
rxrpc: only handle RESPONSE during service challenge
Only process RESPONSE packets while the service connection is still in
RXRPC_CONN_SERVICE_CHALLENGING. Check that state under state_lock before
running response verification and security initialization, then use a local
secured flag to decide whether to queue the secured-connection work after
the state transition. This keeps duplicate or late RESPONSE packets from
re-running the setup path and removes the unlocked post-transition state
test.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Co-developed-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Yuan Tan <yuantan098@gmail.com> Suggested-by: Xin Liu <bird@lzu.edu.cn> Signed-off-by: Jie Wang <jiewang2024@lzu.edu.cn> Signed-off-by: Yang Yang <n05ec@lzu.edu.cn> Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org Link: https://patch.msgid.link/20260408121252.2249051-21-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Howells [Wed, 8 Apr 2026 12:12:45 +0000 (13:12 +0100)]
rxrpc: Fix integer overflow in rxgk_verify_response()
In rxgk_verify_response(), there's a potential integer overflow due to
rounding up token_len before checking it, thereby allowing the length check to
be bypassed.
Fix this by checking the unrounded value against len too (len is limited as
the response must fit in a single UDP packet).
Fixes: 9d1d2b59341f ("rxrpc: rxgk: Implement the yfs-rxgk security class (GSSAPI)") Closes: https://sashiko.dev/#/patchset/20260401105614.1696001-10-dhowells@redhat.com Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org Link: https://patch.msgid.link/20260408121252.2249051-18-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Howells [Wed, 8 Apr 2026 12:12:44 +0000 (13:12 +0100)]
rxrpc: Fix missing error checks for rxkad encryption/decryption failure
Add error checking for failure of crypto_skcipher_en/decrypt() to various
rxkad function as the crypto functions can fail with ENOMEM at least.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Closes: https://sashiko.dev/#/patchset/20260401105614.1696001-10-dhowells@redhat.com Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org Link: https://patch.msgid.link/20260408121252.2249051-17-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Howells [Wed, 8 Apr 2026 12:12:43 +0000 (13:12 +0100)]
rxrpc: Fix key/keyring checks in setsockopt(RXRPC_SECURITY_KEY/KEYRING)
An AF_RXRPC socket can be both client and server at the same time. When
sending new calls (ie. it's acting as a client), it uses rx->key to set the
security, and when accepting incoming calls (ie. it's acting as a server),
it uses rx->securities.
setsockopt(RXRPC_SECURITY_KEY) sets rx->key to point to an rxrpc-type key
and setsockopt(RXRPC_SECURITY_KEYRING) sets rx->securities to point to a
keyring of rxrpc_s-type keys.
Now, it should be possible to use both rx->key and rx->securities on the
same socket - but for userspace AF_RXRPC sockets rxrpc_setsockopt()
prevents that.
Fix this by:
(1) Remove the incorrect check rxrpc_setsockopt(RXRPC_SECURITY_KEYRING)
makes on rx->key.
(2) Move the check that rxrpc_setsockopt(RXRPC_SECURITY_KEY) makes on
rx->key down into rxrpc_request_key().
(3) Remove rxrpc_request_key()'s check on rx->securities.
This (in combination with a previous patch) pushes the checks down into the
functions that set those pointers and removes the cross-checks that prevent
both key and keyring being set.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Closes: https://sashiko.dev/#/patchset/20260401105614.1696001-10-dhowells@redhat.com Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Anderson Nascimento <anderson@allelesecurity.com>
cc: Luxiao Xu <rakukuip@gmail.com>
cc: Yuan Tan <yuantan098@gmail.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org Link: https://patch.msgid.link/20260408121252.2249051-16-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxgk_verify_response() decodes auth_len from the packet and is supposed
to verify that it fits in the remaining bytes. The existing check is
inverted, so oversized RESPONSE authenticators are accepted and passed
to rxgk_decrypt_skb(), which can later reach skb_to_sgvec() with an
impossible length and hit BUG_ON(len).
Decoded from the original latest-net reproduction logs with
scripts/decode_stacktrace.sh:
rxgk_verify_authenticator() copies auth_len bytes into a temporary
buffer and then passes p + auth_len as the parser limit to
rxgk_do_verify_authenticator(). Since p is a __be32 *, that inflates the
parser end pointer by a factor of four and lets malformed RESPONSE
authenticators read past the kmalloc() buffer.
Decoded from the original latest-net reproduction logs with
scripts/decode_stacktrace.sh:
rxkad_decrypt_ticket() decrypts the RXKAD response ticket and then
parses the buffer as plaintext without checking whether
crypto_skcipher_decrypt() succeeded.
A malformed RESPONSE can therefore use a non-block-aligned ticket
length, make the decrypt operation fail, and still drive the ticket
parser with attacker-controlled bytes.
Check the decrypt result and abort the connection with RXKADBADTICKET
when ticket decryption fails.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Co-developed-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Yuan Tan <yuantan098@gmail.com> Suggested-by: Xin Liu <bird@lzu.edu.cn> Tested-by: Ren Wei <enjou1224z@gmail.com> Signed-off-by: Yuqi Xu <xuyuqiabc@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org Link: https://patch.msgid.link/20260408121252.2249051-12-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Douya Le [Wed, 8 Apr 2026 12:12:38 +0000 (13:12 +0100)]
rxrpc: Only put the call ref if one was acquired
rxrpc_input_packet_on_conn() can process a to-client packet after the
current client call on the channel has already been torn down. In that
case chan->call is NULL, rxrpc_try_get_call() returns NULL and there is
no reference to drop.
The client-side implicit-end error path does not account for that and
unconditionally calls rxrpc_put_call(). This turns a protocol error
path into a kernel crash instead of rejecting the packet.
Only drop the call reference if one was actually acquired. Keep the
existing protocol error handling unchanged.
Fixes: 5e6ef4f1017c ("rxrpc: Make the I/O thread take over the call and local processor work") Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Signed-off-by: Douya Le <ldy3087146292@gmail.com> Co-developed-by: Yuan Tan <tanyuan98@gmail.com> Signed-off-by: Yuan Tan <tanyuan98@gmail.com> Suggested-by: Xin Liu <bird@lzu.edu.cn> Signed-off-by: Ao Zhou <n05ec@lzu.edu.cn> Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org Link: https://patch.msgid.link/20260408121252.2249051-11-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Dionne [Wed, 8 Apr 2026 12:12:37 +0000 (13:12 +0100)]
rxrpc: Fix to request an ack if window is limited
Peers may only send immediate acks for every 2 UDP packets received.
When sending a jumbogram, it is important to check that there is
sufficient window space to send another same sized jumbogram following
the current one, and request an ack if there isn't. Failure to do so may
cause the call to stall waiting for an ack until the resend timer fires.
Where jumbograms are in use this causes a very significant drop in
performance.
Fixes: fe24a5494390 ("rxrpc: Send jumbo DATA packets") Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org Link: https://patch.msgid.link/20260408121252.2249051-10-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxrpc: Fix key reference count leak from call->key
When creating a client call in rxrpc_alloc_client_call(), the code obtains
a reference to the key. This is never cleaned up and gets leaked when the
call is destroyed.
Fix this by freeing call->key in rxrpc_destroy_call().
Before the patch, it shows the key reference counter elevated:
rxrpc: Fix rack timer warning to report unexpected mode
rxrpc_rack_timer_expired() clears call->rack_timer_mode to OFF before
the switch. The default case warning therefore always prints OFF and
doesn't identify the unexpected timer mode.
Log the saved mode value instead so the warning reports the actual
unexpected rack timer mode.
Fixes: 7c482665931b ("rxrpc: Implement RACK/TLP to deal with transmission stalls [RFC8985]") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org Link: https://patch.msgid.link/20260408121252.2249051-8-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxrpc: Fix use of wrong skb when comparing queued RESP challenge serial
In rxrpc_post_response(), the code should be comparing the challenge serial
number from the cached response before deciding to switch to a newer
response, but looks at the newer packet private data instead, rendering the
comparison always false.
Fix this by switching to look at the older packet.
Fix further[1] to substitute the new packet in place of the old one if
newer and also to release whichever we don't use.
Fixes: 5800b1cf3fd8 ("rxrpc: Allow CHALLENGEs to the passed to the app for a RESPONSE") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org Link: https://sashiko.dev/#/patchset/20260319150150.4189381-1-dhowells%40redhat.com Link: https://patch.msgid.link/20260408121252.2249051-7-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleh Konko [Wed, 8 Apr 2026 12:12:33 +0000 (13:12 +0100)]
rxrpc: Fix RxGK token loading to check bounds
rxrpc_preparse_xdr_yfs_rxgk() reads the raw key length and ticket length
from the XDR token as u32 values and passes each through round_up(x, 4)
before using the rounded value for validation and allocation. When the raw
length is >= 0xfffffffd, round_up() wraps to 0, so the bounds check and
kzalloc both use 0 while the subsequent memcpy still copies the original
~4 GiB value, producing a heap buffer overflow reachable from an
unprivileged add_key() call.
Fix this by:
(1) Rejecting raw key lengths above AFSTOKEN_GK_KEY_MAX and raw ticket
lengths above AFSTOKEN_GK_TOKEN_MAX before rounding, consistent with
the caps that the RxKAD path already enforces via AFSTOKEN_RK_TIX_MAX.
(2) Sizing the flexible-array allocation from the validated raw key
length via struct_size_t() instead of the rounded value.
(3) Caching the raw lengths so that the later field assignments and
memcpy calls do not re-read from the token, eliminating a class of
TOCTOU re-parse.
The control path (valid token with lengths within bounds) is unaffected.
Fixes: 0ca100ff4df6 ("rxrpc: Add YFS RxGK (GSSAPI) security class") Signed-off-by: Oleh Konko <security@1seal.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org Link: https://patch.msgid.link/20260408121252.2249051-6-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Howells [Wed, 8 Apr 2026 12:12:32 +0000 (13:12 +0100)]
rxrpc: Fix call removal to use RCU safe deletion
Fix rxrpc call removal from the rxnet->calls list to use list_del_rcu()
rather than list_del_init() to prevent stuffing up reading
/proc/net/rxrpc/calls from potentially getting into an infinite loop.
This, however, means that list_empty() no longer works on an entry that's
been deleted from the list, making it harder to detect prior deletion. Fix
this by:
Firstly, make rxrpc_destroy_all_calls() only dump the first ten calls that
are unexpectedly still on the list. Limiting the number of steps means
there's no need to call cond_resched() or to remove calls from the list
here, thereby eliminating the need for rxrpc_put_call() to check for that.
rxrpc_put_call() can then be fixed to unconditionally delete the call from
the list as it is the only place that the deletion occurs.
Fixes: 2baec2c3f854 ("rxrpc: Support network namespacing") Closes: https://sashiko.dev/#/patchset/20260319150150.4189381-1-dhowells%40redhat.com Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org Link: https://patch.msgid.link/20260408121252.2249051-5-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Howells [Wed, 8 Apr 2026 12:12:31 +0000 (13:12 +0100)]
rxrpc: Fix anonymous key handling
In rxrpc_new_client_call_for_sendmsg(), a key with no payload is meant to
be substituted for a NULL key pointer, but the variable this is done with
is subsequently not used.
Fix this by using "key" rather than "rx->key" when filling in the
connection parameters.
Note that this only affects direct use of AF_RXRPC; the kAFS filesystem
doesn't use sendmsg() directly and so bypasses the issue. Further,
AF_RXRPC passes a NULL key in if no key is set, so using an anonymous key
in that manner works. Since this hasn't been noticed to this point, it
might be better just to remove the "key" variable and the code that sets it
- and, arguably, rxrpc_init_client_call_security() would be a better place
to handle it.
Fixes: 19ffa01c9c45 ("rxrpc: Use structs to hold connection params and protocol info") Closes: https://sashiko.dev/#/patchset/20260319150150.4189381-1-dhowells%40redhat.com Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org Link: https://patch.msgid.link/20260408121252.2249051-4-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Howells [Wed, 8 Apr 2026 12:12:29 +0000 (13:12 +0100)]
rxrpc: Fix key quota calculation for multitoken keys
In the rxrpc key preparsing, every token extracted sets the proposed quota
value, but for multitoken keys, this will overwrite the previous proposed
quota, losing it.
Fix this by adding to the proposed quota instead.
Fixes: 8a7a3eb4ddbe ("KEYS: RxRPC: Use key preparsing") Closes: https://sashiko.dev/#/patchset/20260319150150.4189381-1-dhowells%40redhat.com Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org Link: https://patch.msgid.link/20260408121252.2249051-2-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
seg6: fix dst_cache sharing in seg6 lwtunnel
The seg6 lwtunnel encap uses a single per-route dst_cache shared
between seg6_input_core() and seg6_output_core(). These two paths
can perform the post-encap SID lookup in different routing contexts
(e.g., ip rules matching on the ingress interface, or VRF table
separation). Whichever path runs first populates the cache, and the
other reuses it blindly, bypassing its own lookup.
Patch 1 fixes this by splitting the cache into cache_input and
cache_output. Patch 2 adds a selftest that validates the isolation.
====================
Andrea Mayer [Sat, 4 Apr 2026 00:44:05 +0000 (02:44 +0200)]
selftests: seg6: add test for dst_cache isolation in seg6 lwtunnel
Add a selftest that verifies the dst_cache in seg6 lwtunnel is not
shared between the input (forwarding) and output (locally generated)
paths.
The test creates three namespaces (ns_src, ns_router, ns_dst)
connected in a line. An SRv6 encap route on ns_router encapsulates
traffic destined to cafe::1 with SID fc00::100. The SID is
reachable only for forwarded traffic (from ns_src) via an ip rule
matching the ingress interface (iif veth-r0 lookup 100), and
blackholed in the main table.
The test verifies that:
1. A packet generated locally on ns_router does not reach
ns_dst with an empty cache, since the SID is blackholed;
2. A forwarded packet from ns_src populates the input cache
from table 100 and reaches ns_dst;
3. A packet generated locally on ns_router still does not
reach ns_dst after the input cache is populated,
confirming the output path does not reuse the input
cache entry.
Both the forwarded and local packets are pinned to the same CPU
with taskset, since dst_cache is per-cpu.
Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Justin Iurman <justin.iurman@gmail.com> Link: https://patch.msgid.link/20260404004405.4057-3-andrea.mayer@uniroma2.it Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrea Mayer [Sat, 4 Apr 2026 00:44:04 +0000 (02:44 +0200)]
seg6: separate dst_cache for input and output paths in seg6 lwtunnel
The seg6 lwtunnel uses a single dst_cache per encap route, shared
between seg6_input_core() and seg6_output_core(). These two paths
can perform the post-encap SID lookup in different routing contexts
(e.g., ip rules matching on the ingress interface, or VRF table
separation). Whichever path runs first populates the cache, and the
other reuses it blindly, bypassing its own lookup.
Fix this by splitting the cache into cache_input and cache_output,
so each path maintains its own cached dst independently.
Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Cc: stable@vger.kernel.org Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Justin Iurman <justin.iurman@gmail.com> Link: https://patch.msgid.link/20260404004405.4057-2-andrea.mayer@uniroma2.it Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Golle [Sun, 5 Apr 2026 21:29:19 +0000 (22:29 +0100)]
selftests: net: bridge_vlan_mcast: wait for h1 before querier check
The querier-interval test adds h1 (currently a slave of the VRF created
by simple_if_init) to a temporary bridge br1 acting as an outside IGMP
querier. The kernel VRF driver (drivers/net/vrf.c) calls cycle_netdev()
on every slave add and remove, toggling the interface admin-down then up.
Phylink takes the PHY down during the admin-down half of that cycle.
Since h1 and swp1 are cable-connected, swp1 also loses its link may need
several seconds to re-negotiate.
Use setup_wait_dev $h1 0 which waits for h1 to return to UP state, so the
test can rely on the link being back up at this point.
Jakub Kicinski [Sat, 4 Apr 2026 00:19:38 +0000 (17:19 -0700)]
net: avoid nul-deref trying to bind mp to incapable device
Sashiko points out that we use qops in __net_mp_open_rxq()
but never validate they are null. This was introduced when
check was moved from netdev_rx_queue_restart().
Look at ops directly instead of the locking config.
qops imply netdev_need_ops_lock(). We used netdev_need_ops_lock()
initially to signify that the real_num_rx_queues check below
is safe without rtnl_lock, but I'm not sure if this is actually
clear to most people, anyway.
Fixes: da7772a2b4ad ("net: move mp->rx_page_size validation to __net_mp_open_rxq()") Acked-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20260404001938.2425670-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johan Alvarado [Mon, 6 Apr 2026 07:44:25 +0000 (07:44 +0000)]
net: stmmac: dwmac-motorcomm: fix eFUSE MAC address read failure
This patch fixes an issue where reading the MAC address from the eFUSE
fails due to a race condition.
The root cause was identified by comparing the driver's behavior with a
custom U-Boot port. In U-Boot, the MAC address was read successfully
every time because the driver was loaded later in the boot process, giving
the hardware ample time to initialize. In Linux, reading the eFUSE
immediately returns all zeros, resulting in a fallback to a random MAC address.
Hardware cold-boot testing revealed that the eFUSE controller requires a
short settling time to load its internal data. Adding a 2000-5000us
delay after the reset ensures the hardware is fully ready, allowing the
native MAC address to be read consistently.
Fixes: 02ff155ea281 ("net: stmmac: Add glue driver for Motorcomm YT6801 ethernet controller") Reported-by: Georg Gottleuber <ggo@tuxedocomputers.com> Closes: https://lore.kernel.org/24cfefff-1233-4745-8c47-812b502d5d19@tuxedocomputers.com Signed-off-by: Johan Alvarado <contact@c127.dev> Reviewed-by: Yao Zi <me@ziyao.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/fc5992a4-9532-49c3-8ec1-c2f8c5b84ca1@smtp-relay.sendinblue.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
John Pavlick [Mon, 6 Apr 2026 13:23:33 +0000 (13:23 +0000)]
net: sfp: add quirks for Hisense and HSGQ GPON ONT SFP modules
Several GPON ONT SFP sticks based on Realtek RTL960x report
1000BASE-LX at 1300MBd in their EEPROM but can operate at 2500base-X.
On hosts capable of 2500base-X (e.g. Banana Pi R3 / MT7986), the
kernel negotiates only 1G because it trusts the incorrect EEPROM data.
Each quirk advertises 2500base-X and ignores TX_FAULT during the
module's ~40s Linux boot time.
Tested on Banana Pi R3 (MT7986) with OpenWrt 25.12.1, confirmed
2.5Gbps link and full throughput with flow offloading.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Suggested-by: Marcin Nita <marcin.nita@leolabs.pl> Signed-off-by: John Pavlick <jspavlick@posteo.net> Link: https://patch.msgid.link/20260406132321.72563-1-jspavlick@posteo.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/tls: fix use-after-free in -EBUSY error path of tls_do_encryption
The -EBUSY handling in tls_do_encryption(), introduced by commit 859054147318 ("net: tls: handle backlogging of crypto requests"), has
a use-after-free due to double cleanup of encrypt_pending and the
scatterlist entry.
When crypto_aead_encrypt() returns -EBUSY, the request is enqueued to
the cryptd backlog and the async callback tls_encrypt_done() will be
invoked upon completion. That callback unconditionally restores the
scatterlist entry (sge->offset, sge->length) and decrements
ctx->encrypt_pending. However, if tls_encrypt_async_wait() returns an
error, the synchronous error path in tls_do_encryption() performs the
same cleanup again, double-decrementing encrypt_pending and
double-restoring the scatterlist.
The double-decrement corrupts the encrypt_pending sentinel (initialized
to 1), making tls_encrypt_async_wait() permanently skip the wait for
pending async callbacks. A subsequent sendmsg can then free the
tls_rec via bpf_exec_tx_verdict() while a cryptd callback is still
pending, resulting in a use-after-free when the callback fires on the
freed record.
Fix this by skipping the synchronous cleanup when the -EBUSY async
wait returns an error, since the callback has already handled
encrypt_pending and sge restoration.
Fixes: 859054147318 ("net: tls: handle backlogging of crypto requests") Cc: stable@vger.kernel.org Signed-off-by: Muhammad Alifa Ramdhan <ramdhan@starlabs.sg> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://patch.msgid.link/20260403013617.2838875-1-ramdhan@starlabs.sg Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: skb: fix cross-cache free of KFENCE-allocated skb head
SKB_SMALL_HEAD_CACHE_SIZE is intentionally set to a non-power-of-2
value (e.g. 704 on x86_64) to avoid collisions with generic kmalloc
bucket sizes. This ensures that skb_kfree_head() can reliably use
skb_end_offset to distinguish skb heads allocated from
skb_small_head_cache vs. generic kmalloc caches.
However, when KFENCE is enabled, kfence_ksize() returns the exact
requested allocation size instead of the slab bucket size. If a caller
(e.g. bpf_test_init) allocates skb head data via kzalloc() and the
requested size happens to equal SKB_SMALL_HEAD_CACHE_SIZE, then
slab_build_skb() -> ksize() returns that exact value. After subtracting
skb_shared_info overhead, skb_end_offset ends up matching
SKB_SMALL_HEAD_HEADROOM, causing skb_kfree_head() to incorrectly free
the object to skb_small_head_cache instead of back to the original
kmalloc cache, resulting in a slab cross-cache free:
kmem_cache_free(skbuff_small_head): Wrong slab cache. Expected
skbuff_small_head but got kmalloc-1k
Fix this by always calling kfree(head) in skb_kfree_head(). This keeps
the free path generic and avoids allocator-specific misclassification
for KFENCE objects.
Fixes: bf9f1baa279f ("net: add dedicated kmem_cache for typical/small skb->head") Reported-by: Antonius <antonius@bluedragonsec.com> Closes: https://lore.kernel.org/netdev/CAK8a0jxC5L5N7hq-DT2_NhUyjBxrPocoiDazzsBk4TGgT1r4-A@mail.gmail.com/ Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260403014517.142550-1-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When send() or recv() returns -1 with errno == EINTR, the code skips
the break but still adds the return value to nwritten/nread, making it
decrease by 1. This leads to wrong buffer offsets and wrong bytes count.
Fix it by explicitly continuing the loop on EINTR, so the return value
is only added when it is positive.
====================
xsk: tailroom reservation and MTU validation
here we fix a long-standing issue regarding multi-buffer scenario in ZC
mode - we have not been providing space at the end of the buffer where
multi-buffer XDP works on skb_shared_info. This has been brought to our
attention via [0].
Unaligned mode does not get any specific treatment, it is user's
responsibility to properly handle XSK addresses in queues.
With adjustments included here in this set against xskxceiver I have
been able to pass the full test suite on ice.
selftests: bpf: adjust rx_dropped xskxceiver's test to respect tailroom
Since we have changed how big user defined headroom in umem can be,
change the logic in testapp_stats_rx_dropped() so we pass updated
headroom validation in xdp_umem_reg() and still drop half of frames.
Test works on non-mbuf setup so __xsk_pool_get_rx_frame_size() that is
called on xsk_rcv_check() will not account skb_shared_info size. Taking
the tailroom size into account in test being fixed is needed as
xdp_umem_reg() defaults to respect it.
selftests: bpf: have a separate variable for drop test
Currently two different XDP programs share a static variable for
different purposes (picking where to redirect on shared umem test &
whether to drop a packet). This can be a problem when running full test
suite - idx can be written by shared umem test and this value can cause
a false behavior within XDP drop half test.
Introduce a dedicated variable for drop half test so that these two
don't step on each other toes. There is no real need for using
__sync_fetch_and_add here as XSK tests are executed on single CPU.
Skip tail adjust tests in xskxceiver for SKB mode as it is not very
friendly for it. multi-buffer case does not work as xdp_rxq_info that is
registered for generic XDP does not report ::frag_size. The non-mbuf
path copies packet via skb_pp_cow_data() which only accounts for
headroom, leaving us with no tailroom and causing underlying XDP prog to
drop packets therefore.
For multi-buffer test on other modes, change the amount of bytes we use
for growth, assume worst-case scenario and take care of headroom and
tailroom.
selftests: bpf: introduce a common routine for reading procfs
Parametrize current way of getting MAX_SKB_FRAGS value from {sys,proc}fs
so that it can be re-used to get cache line size of system's CPU. All
that just to mimic and compute size of kernel's struct skb_shared_info
which for xsk and test suite interpret as tailroom.
Introduce two variables to ifobject struct that will carry count of skb
frags and tailroom size. Do the reading and computing once, at the
beginning of test suite execution in xskxceiver, but for test_progs such
way is not possible as in this environment each test setups and torns
down ifobject structs.
xsk: validate MTU against usable frame size on bind
AF_XDP bind currently accepts zero-copy pool configurations without
verifying that the device MTU fits into the usable frame space provided
by the UMEM chunk.
This becomes a problem since we started to respect tailroom which is
subtracted from chunk_size (among with headroom). 2k chunk size might
not provide enough space for standard 1500 MTU, so let us catch such
settings at bind time. Furthermore, validate whether underlying HW will
be able to satisfy configured MTU wrt XSK's frame size multiplied by
supported Rx buffer chain length (that is exposed via
net_device::xdp_zc_max_segs).
Currently xp_assign_dev_shared() is missing XDP_USE_SG being propagated
to flags so set it in order to preserve mtu check that is supposed to be
done only when no multi-buffer setup is in picture.
Also, this flag has the same value as XDP_UMEM_TX_SW_CSUM so we could
get unexpected SG setups for software Tx checksums. Since csum flag is
UAPI, modify value of XDP_UMEM_SG_FLAG.
Fixes: d609f3d228a8 ("xsk: add multi-buffer support for sockets sharing umem") Reviewed-by: Björn Töpel <bjorn@kernel.org> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://patch.msgid.link/20260402154958.562179-4-maciej.fijalkowski@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Multi-buffer XDP stores information about frags in skb_shared_info that
sits at the tailroom of a packet. The storage space is reserved via
xdp_data_hard_end():
Currently we do not respect this tailroom space in multi-buffer AF_XDP
ZC scenario. To address this, introduce xsk_pool_get_tailroom() and use
it within xsk_pool_get_rx_frame_size() which is used in ZC drivers to
configure length of HW Rx buffer.
Typically drivers on Rx Hw buffers side work on 128 byte alignment so
let us align the value returned by xsk_pool_get_rx_frame_size() in order
to avoid addressing this on driver's side. This addresses the fact that
idpf uses mentioned function *before* pool->dev being set so we were at
risk that after subtracting tailroom we would not provide 128-byte
aligned value to HW.
Since xsk_pool_get_rx_frame_size() is actively used in xsk_rcv_check()
and __xsk_rcv(), add a variant of this routine that will not include 128
byte alignment and therefore old behavior is preserved.
Reviewed-by: Björn Töpel <bjorn@kernel.org> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Fixes: 24ea50127ecf ("xsk: support mbuf on ZC RX") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://patch.msgid.link/20260402154958.562179-3-maciej.fijalkowski@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xsk: tighten UMEM headroom validation to account for tailroom and min frame
The current headroom validation in xdp_umem_reg() could leave us with
insufficient space dedicated to even receive minimum-sized ethernet
frame. Furthermore if multi-buffer would come to play then
skb_shared_info stored at the end of XSK frame would be corrupted.
HW typically works with 128-aligned sizes so let us provide this value
as bare minimum.
Multi-buffer setting is known later in the configuration process so
besides accounting for 128 bytes, let us also take care of tailroom space
upfront.
Reviewed-by: Björn Töpel <bjorn@kernel.org> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Fixes: 99e3a236dd43 ("xsk: Add missing check on user supplied headroom size") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://patch.msgid.link/20260402154958.562179-2-maciej.fijalkowski@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 3 Apr 2026 23:02:31 +0000 (16:02 -0700)]
Merge branch 'net-stmmac-fix-tegra234-mgbe-clock'
Jon Hunter says:
====================
net: stmmac: Fix Tegra234 MGBE clock
The name of the PTP ref clock for the Tegra234 MGBE ethernet controller
does not match the generic name in the stmmac platform driver. Despite
this basic ethernet is functional on the Tegra234 platforms that use
this driver and as far as I know, we have not tested PTP support with
this driver. Hence, the risk of breaking any functionality is low.
The previous attempt to fix this in the stmmac platform driver, by
supporting the Tegra234 PTP clock name, was rejected [0]. The preference
from the netdev maintainers is to fix this in the DT binding for
Tegra234.
This series fixes this by correcting the device-tree binding to align
with the generic name for the PTP clock. I understand that this is
breaking the ABI for this device, which we should never do, but this
is a last resort for getting this fixed. I am open to any better ideas
to fix this. Please note that we still maintain backward compatibility
in the driver to allow older device-trees to work, but we don't
advertise this via the binding, because I did not see any value in doing
so.
====================
Jon Hunter [Wed, 1 Apr 2026 10:29:40 +0000 (11:29 +0100)]
dt-bindings: net: Fix Tegra234 MGBE PTP clock
The PTP clock for the Tegra234 MGBE device is incorrectly named
'ptp-ref' and should be 'ptp_ref'. This is causing the following
warning to be observed on Tegra234 platforms that use this device:
Although this constitutes an ABI breakage in the binding for this
device, PTP support has clearly never worked and so fix this now
so we can correct the device-tree for this device. Note that the
MGBE driver still supports the legacy 'ptp-ref' clock name and so
older/existing device-trees will still work, but given that this
is not the correct name, there is no point to advertise this in the
binding.
Fixes: 189c2e5c7669 ("dt-bindings: net: Add Tegra234 MGBE") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://patch.msgid.link/20260401102941.17466-3-jonathanh@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jon Hunter [Wed, 1 Apr 2026 10:29:39 +0000 (11:29 +0100)]
net: stmmac: Fix PTP ref clock for Tegra234
Since commit 030ce919e114 ("net: stmmac: make sure that ptp_rate is not
0 before configuring timestamping") was added the following error is
observed on Tegra234:
It turns out that the Tegra234 device-tree binding defines the PTP ref
clock name as 'ptp-ref' and not 'ptp_ref' and the above commit now
exposes this and that the PTP clock is not configured correctly.
In order to update device-tree to use the correct 'ptp_ref' name, update
the Tegra MGBE driver to use 'ptp_ref' by default and fallback to using
'ptp-ref' if this clock name is present.
Fixes: d8ca113724e7 ("net: stmmac: tegra: Add MGBE support") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260401102941.17466-2-jonathanh@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nfc: s3fwrn5: allocate rx skb before consuming bytes
s3fwrn82_uart_read() reports the number of accepted bytes to the serdev
core. The current code consumes bytes into recv_skb and may already
deliver a complete frame before allocating a fresh receive buffer.
If that alloc_skb() fails, the callback returns 0 even though it has
already consumed bytes, and it leaves recv_skb as NULL for the next
receive callback. That breaks the receive_buf() accounting contract and
can also lead to a NULL dereference on the next skb_put_u8().
Allocate the receive skb lazily before consuming the next byte instead.
If allocation fails, return the number of bytes already accepted.
In configurations with multiple tunnel layers and MPLS lwtunnel routing, a
single tunnel hop can increment the counter beyond this limit. This causes
packets to be dropped with the "Dead loop on virtual device" message even
when a routing loop doesn't exist.
Increase IP_TUNNEL_RECURSION_LIMIT from 4 to 5 to handle this use-case.
Yiqi Sun [Thu, 2 Apr 2026 07:04:19 +0000 (15:04 +0800)]
ipv4: icmp: fix null-ptr-deref in icmp_build_probe()
ipv6_stub->ipv6_dev_find() may return ERR_PTR(-EAFNOSUPPORT) when the
IPv6 stack is not active (CONFIG_IPV6=m and not loaded), and passing
this error pointer to dev_hold() will cause a kernel crash with
null-ptr-deref.
Instead, silently discard the request. RFC 8335 does not appear to
define a specific response for the case where an IPv6 interface
identifier is syntactically valid but the implementation cannot perform
the lookup at runtime, and silently dropping the request may safer than
misreporting "No Such Interface".
ipv4: nexthop: allocate skb dynamically in rtm_get_nexthop()
When querying a nexthop object via RTM_GETNEXTHOP, the kernel currently
allocates a fixed-size skb using NLMSG_GOODSIZE. While sufficient for
single nexthops and small Equal-Cost Multi-Path groups, this fixed
allocation fails for large nexthop groups like 512 nexthops.
Fix this by allocating the size dynamically using nh_nlmsg_size() and
using nlmsg_new(), this is consistent with nexthop_notify() behavior. In
addition, adjust nh_nlmsg_size_grp() so it calculates the size needed
based on flags passed. While at it, also add the size of NHA_FDB for
nexthop group size calculation as it was missing too.
This cannot be reproduced via iproute2 as the group size is currently
limited and the command fails as follows:
addattr_l ERROR: message exceeded bound of 1048
Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Reported-by: Yiming Qian <yimingqian591@gmail.com> Closes: https://lore.kernel.org/netdev/CAL_bE8Li2h4KO+AQFXW4S6Yb_u5X4oSKnkywW+LPFjuErhqELA@mail.gmail.com/ Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260402072613.25262-2-fmancera@suse.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv4: nexthop: avoid duplicate NHA_HW_STATS_ENABLE on nexthop group dump
Currently NHA_HW_STATS_ENABLE is included twice everytime a dump of
nexthop group is performed with NHA_OP_FLAG_DUMP_STATS. As all the stats
querying were moved to nla_put_nh_group_stats(), leave only that
instance of the attribute querying.
Fixes: 5072ae00aea4 ("net: nexthop: Expose nexthop group HW stats to user space") Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260402072613.25262-1-fmancera@suse.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: qualcomm: qca_uart: report the consumed byte on RX skb allocation failure
qca_tty_receive() consumes each input byte before checking whether a
completed frame needs a fresh receive skb. When the current byte completes
a frame, the driver delivers that frame and then allocates a new skb for
the next one.
If that allocation fails, the current code returns i even though data[i]
has already been consumed and may already have completed the delivered
frame. Since serdev interprets the return value as the number of accepted
bytes, this under-reports progress by one byte and can replay the final
byte of the completed frame into a fresh parser state on the next call.
Return i + 1 in that failure path so the accepted-byte count matches the
actual receive-state progress.
Fixes: dfc768fbe618 ("net: qualcomm: add QCA7000 UART driver") Cc: stable@vger.kernel.org Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260402071207.4036-1-pengpeng@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleh Konko [Thu, 2 Apr 2026 09:48:57 +0000 (09:48 +0000)]
tipc: fix bc_ackers underflow on duplicate GRP_ACK_MSG
The GRP_ACK_MSG handler in tipc_group_proto_rcv() currently decrements
bc_ackers on every inbound group ACK, even when the same member has
already acknowledged the current broadcast round.
Because bc_ackers is a u16, a duplicate ACK received after the last
legitimate ACK wraps the counter to 65535. Once wrapped,
tipc_group_bc_cong() keeps reporting congestion and later group
broadcasts on the affected socket stay blocked until the group is
recreated.
Fix this by ignoring duplicate or stale ACKs before touching bc_acked or
bc_ackers. This makes repeated GRP_ACK_MSG handling idempotent and
prevents the underflow path.
Fixes: 2f487712b893 ("tipc: guarantee that group broadcast doesn't bypass group unicast") Cc: stable@vger.kernel.org Signed-off-by: Oleh Konko <security@1seal.org> Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/41a4833f368641218e444fdcff822039.security@1seal.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rtnetlink: add missing netlink_ns_capable() check for peer netns
rtnl_newlink() lacks a CAP_NET_ADMIN capability check on the peer
network namespace when creating paired devices (veth, vxcan,
netkit). This allows an unprivileged user with a user namespace
to create interfaces in arbitrary network namespaces, including
init_net.
Add a netlink_ns_capable() check for CAP_NET_ADMIN in the peer
namespace before allowing device creation to proceed.
Fixes: 81adee47dfb6 ("net: Support specifying the network namespace upon device creation.") Signed-off-by: Nikolaos Gkarlis <nickgarlis@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260402181432.4126920-1-nickgarlis@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bridge: guard local VLAN-0 FDB helpers against NULL vlan group
When CONFIG_BRIDGE_VLAN_FILTERING is not set, br_vlan_group() and
nbp_vlan_group() return NULL (br_private.h stub definitions). The
BR_BOOLOPT_FDB_LOCAL_VLAN_0 toggle code is compiled unconditionally and
reaches br_fdb_delete_locals_per_vlan_port() and
br_fdb_insert_locals_per_vlan_port(), where the NULL vlan group pointer
is dereferenced via list_for_each_entry(v, &vg->vlan_list, vlist).
The observed crash is in the delete path, triggered when creating a
bridge with IFLA_BR_MULTI_BOOLOPT containing BR_BOOLOPT_FDB_LOCAL_VLAN_0
via RTM_NEWLINK. The insert helper has the same bug pattern.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000056: 0000 [#1] KASAN NOPTI
KASAN: null-ptr-deref in range [0x00000000000002b0-0x00000000000002b7]
RIP: 0010:br_fdb_delete_locals_per_vlan+0x2b9/0x310
Call Trace:
br_fdb_toggle_local_vlan_0+0x452/0x4c0
br_toggle_fdb_local_vlan_0+0x31/0x80 net/bridge/br.c:276
br_boolopt_toggle net/bridge/br.c:313
br_boolopt_multi_toggle net/bridge/br.c:364
br_changelink net/bridge/br_netlink.c:1542
br_dev_newlink net/bridge/br_netlink.c:1575
Add NULL checks for the vlan group pointer in both helpers, returning
early when there are no VLANs to iterate. This matches the existing
pattern used by other bridge FDB functions such as br_fdb_add() and
br_fdb_delete().
Fixes: 21446c06b441 ("net: bridge: Introduce UAPI for BR_BOOLOPT_FDB_LOCAL_VLAN_0") Signed-off-by: Zijing Yin <yzjaurora@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20260402140153.3925663-1-yzjaurora@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: airoha: Fix memory leak in airoha_qdma_rx_process()
If an error occurs on the subsequents buffers belonging to the
non-linear part of the skb (e.g. due to an error in the payload length
reported by the NIC or if we consumed all the available fragments for
the skb), the page_pool fragment will not be linked to the skb so it will
not return to the pool in the airoha_qdma_rx_process() error path. Fix the
memory leak partially reverting commit 'd6d2b0e1538d ("net: airoha: Fix
page recycling in airoha_qdma_rx_process()")' and always running
page_pool_put_full_page routine in the airoha_qdma_rx_process() error
path.
When CONFIG_FIXED_PHY is in a loadable module, the fec driver cannot be
built-in any more:
x86_64-linux-ld: vmlinux.o: in function `fec_enet_mii_probe':
fec_main.c:(.text+0xc4f367): undefined reference to `fixed_phy_unregister'
x86_64-linux-ld: vmlinux.o: in function `fec_enet_close':
fec_main.c:(.text+0xc59591): undefined reference to `fixed_phy_unregister'
x86_64-linux-ld: vmlinux.o: in function `fec_enet_mii_probe.cold':
Select the fixed phy support on all targets to make this build
correctly, not just on coldfire.
Notat that Essentially the stub helpers in include/linux/phy_fixed.h
cannot be used correctly because of this build time dependency,
and we could just remove them to hit the build failure more often
when a driver uses them without the 'select FIXED_PHY'.
Fixes: dc86b621e1b4 ("net: fec: register a fixed phy using fixed_phy_register_100fd if needed") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260402141048.2713445-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcf_csum_act() walks nested VLAN headers directly from skb->data when an
skb still carries in-payload VLAN tags. The current code reads
vlan->h_vlan_encapsulated_proto and then pulls VLAN_HLEN bytes without
first ensuring that the full VLAN header is present in the linear area.
If only part of an inner VLAN header is linearized, accessing
h_vlan_encapsulated_proto reads past the linear area, and the following
skb_pull(VLAN_HLEN) may violate skb invariants.
Fix this by requiring pskb_may_pull(skb, VLAN_HLEN) before accessing and
pulling each nested VLAN header. If the header still is not fully
available, drop the packet through the existing error path.
Fixes: 2ecba2d1e45b ("net: sched: act_csum: Fix csum calc for tagged packets") Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Co-developed-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Yuan Tan <yuantan098@gmail.com> Suggested-by: Xin Liu <bird@lzu.edu.cn> Tested-by: Ren Wei <enjou1224z@gmail.com> Signed-off-by: Ruide Cao <caoruide123@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/22df2fcb49f410203eafa5d97963dd36089f4ecf.1774892775.git.caoruide123@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The jumbo_frm() chain-mode implementation unconditionally computes
len = nopaged_len - bmax;
where nopaged_len = skb_headlen(skb) (linear bytes only) and bmax is
BUF_SIZE_8KiB or BUF_SIZE_2KiB. However, the caller stmmac_xmit()
decides to invoke jumbo_frm() based on skb->len (total length including
page fragments):
When a packet has a small linear portion (nopaged_len <= bmax) but a
large total length due to page fragments (skb->len > bmax), the
subtraction wraps as an unsigned integer, producing a huge len value
(~0xFFFFxxxx). This causes the while (len != 0) loop to execute
hundreds of thousands of iterations, passing skb->data + bmax * i
pointers far beyond the skb buffer to dma_map_single(). On IOMMU-less
SoCs (the typical deployment for stmmac), this maps arbitrary kernel
memory to the DMA engine, constituting a kernel memory disclosure and
potential memory corruption from hardware.
Fix this by introducing a buf_len local variable clamped to
min(nopaged_len, bmax). Computing len = nopaged_len - buf_len is then
always safe: it is zero when the linear portion fits within a single
descriptor, causing the while (len != 0) loop to be skipped naturally,
and the fragment loop in stmmac_xmit() handles page fragments afterward.
David Carlier [Wed, 1 Apr 2026 21:12:18 +0000 (22:12 +0100)]
net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit()
When dma_map_single() fails in tse_start_xmit(), the function returns
NETDEV_TX_OK without freeing the skb. Since NETDEV_TX_OK tells the
stack the packet was consumed, the skb is never freed, leaking memory
on every DMA mapping failure.
Add dev_kfree_skb_any() before returning to properly free the skb.
Fixes: bbd2190ce96d ("Altera TSE: Add main and header file for Altera Ethernet Driver") Cc: stable@vger.kernel.org Signed-off-by: David Carlier <devnexen@gmail.com> Link: https://patch.msgid.link/20260401211218.279185-1-devnexen@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Qingfang Deng [Wed, 1 Apr 2026 02:28:39 +0000 (10:28 +0800)]
MAINTAINERS: orphan PPP over Ethernet driver
We haven't seen activities from Michal Ostrowski for quite a long time.
The last commit from him is fb64bb560e18 ("PPPoE: Fix flush/close
races."), which was in 2009. Email to mostrows@earthlink.net also
bounces.
Merge tag 'net-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"With fixes from wireless, bluetooth and netfilter included we're back
to each PR carrying 30%+ more fixes than in previous era.
The good news is that so far none of the "extra" fixes are themselves
causing real regressions. Not sure how much comfort that is.
Current release - fix to a fix:
- netdevsim: fix build if SKB_EXTENSIONS=n
- eth: stmmac: skip VLAN restore when VLAN hash ops are missing
Previous releases - regressions:
- wifi: iwlwifi: mvm: don't send a 6E related command when
not supported
Previous releases - always broken:
- some info leak fixes
- add missing clearing of skb->cb[] on ICMP paths from tunnels
- ipv6:
- flowlabel: defer exclusive option free until RCU teardown
- avoid overflows in ip6_datagram_send_ctl()
- mpls: add seqcount to protect platform_labels from OOB access
- bridge: improve safety of parsing ND options
- bluetooth: fix leaks, overflows and races in hci_sync
- netfilter: add more input validation, some to address bugs directly
some to prevent exploits from cooking up broken configurations
- wifi:
- ath: avoid poor performance due to stopping the wrong
aggregation session
- virt_wifi: remove SET_NETDEV_DEV to avoid use-after-free
- eth:
- fec: fix the PTP periodic output sysfs interface
- enetc: safely reinitialize TX BD ring when it has unsent frames"
* tag 'net-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
eth: fbnic: Increase FBNIC_QUEUE_SIZE_MIN to 64
ipv6: avoid overflows in ip6_datagram_send_ctl()
net: hsr: fix VLAN add unwind on slave errors
net: hsr: serialize seq_blocks merge across nodes
vsock: initialize child_ns_mode_locked in vsock_net_init()
selftests/tc-testing: add tests for cls_fw and cls_flow on shared blocks
net/sched: cls_flow: fix NULL pointer dereference on shared blocks
net/sched: cls_fw: fix NULL pointer dereference on shared blocks
net/x25: Fix overflow when accumulating packets
net/x25: Fix potential double free of skb
bnxt_en: Restore default stat ctxs for ULP when resource is available
bnxt_en: Don't assume XDP is never enabled in bnxt_init_dflt_ring_mode()
bnxt_en: Refactor some basic ring setup and adjustment logic
net/mlx5: Fix switchdev mode rollback in case of failure
net/mlx5: Avoid "No data available" when FW version queries fail
net/mlx5: lag: Check for LAG device before creating debugfs
net: macb: properly unregister fixed rate clocks
net: macb: fix clk handling on PCI glue driver removal
virtio_net: clamp rss_max_key_size to NETDEV_RSS_KEY_LEN
net/sched: sch_netem: fix out-of-bounds access in packet corruption
...
Merge tag 'iommu-fixes-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- IOMMU-PT related compile breakage in for AMD driver
- IOTLB flushing behavior when unmapped region is larger than requested
due to page-sizes
- Fix IOTLB flush behavior with empty gathers
* tag 'iommu-fixes-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommupt/amdv1: mark amdv1pt_install_leaf_entry as __always_inline
iommupt: Fix short gather if the unmap goes into a large mapping
iommu: Do not call drivers for empty gathers
Merge tag 'sound-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"People have been so busy for hunting and we're still getting more
changes than wished for, but it doesn't look too scary; almost all
changes are device-specific small fixes.
I guess it's rather a casual bump, and no more Easter eggs are left
for 7.0 (hopefully)...
- Fixes for the recent regression on ctxfi driver
- Fix missing INIT_LIST_HEAD() for ASoC card_aux_list
- Usual HD- and USB-audio, and ASoC AMD quirk updates
- ASoC fixes for AMD and Intel"
* tag 'sound-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ASoC: amd: ps: Fix missing leading zeros in subsystem_device SSID log
ALSA: usb-audio: Exclude Scarlett 2i2 1st Gen (8016) from SKIP_IFACE_SETUP
ALSA: hda/realtek: add quirk for Acer Swift SFG14-73
ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14IMH9
ASoC: Intel: boards: fix unmet dependency on PINCTRL
ASoC: Intel: ehl_rt5660: Use the correct rtd->dev device in hw_params
ALSA: ctxfi: Don't enumerate SPDIF1 at DAIO initialization
ALSA: hda/realtek: Add quirk for Lenovo Yoga Slim 7 14AKP10
ALSA: hda/realtek: add quirk for HP Laptop 15-fc0xxx
ASoC: ep93xx: Fix unchecked clk_prepare_enable() and add rollback on failure
ASoC: soc-core: call missing INIT_LIST_HEAD() for card_aux_list
ALSA: hda/realtek: Add quirk for Samsung Book2 Pro 360 (NP950QED)
ASoC: amd: yc: Add DMI entry for HP Laptop 15-fc0xxx
ASoC: amd: yc: Add DMI quirk for ASUS Vivobook Pro 16X OLED M7601RM
ALSA: hda/realtek: Add quirk for ASUS ROG Strix SCAR 15
ALSA: usb-audio: Exclude Scarlett Solo 1st Gen from SKIP_IFACE_SETUP
ALSA: caiaq: fix stack out-of-bounds read in init_card
ALSA: ctxfi: Check the error for index mapping
ALSA: ctxfi: Fix missing SPDIFI1 index handling
ALSA: hda/realtek: add quirk for HP Victus 15-fb0xxx
...
Merge tag 'auxdisplay-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay
Pull auxdisplay fixes from Andy Shevchenko:
- Fix NULL dereference in linedisp_release()
- Fix ht16k33 DT bindings to avoid warnings
- Handle errors in I²C transfers in lcd2s driver
* tag 'auxdisplay-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay:
auxdisplay: line-display: fix NULL dereference in linedisp_release
auxdisplay: lcd2s: add error handling for i2c transfers
dt-bindings: auxdisplay: ht16k33: Use unevaluatedProperties to fix common property warning
On systems with 64K pages, RX queues will be wedged if users set the
descriptor count to the current minimum (16). Fbnic fragments large
pages into 4K chunks, and scales down the ring size accordingly. With
64K pages and 16 descriptors, the ring size mask is 0 and will never
be filled.
32 descriptors is another special case that wedges the RX rings.
Internally, the rings track pages for the head/tail pointers, not page
fragments. So with 32 descriptors, there's only 1 usable page as one
ring slot is kept empty to disambiguate between an empty/full ring.
As a result, the head pointer never advances and the HW stalls after
consuming 16 page fragments.
Eric Dumazet [Wed, 1 Apr 2026 15:47:21 +0000 (15:47 +0000)]
ipv6: avoid overflows in ip6_datagram_send_ctl()
Yiming Qian reported :
<quote>
I believe I found a locally triggerable kernel bug in the IPv6 sendmsg
ancillary-data path that can panic the kernel via `skb_under_panic()`
(local DoS).
The core issue is a mismatch between:
- a 16-bit length accumulator (`struct ipv6_txoptions::opt_flen`, type
`__u16`) and
- a pointer to the *last* provided destination-options header (`opt->dst1opt`)
when multiple `IPV6_DSTOPTS` control messages (cmsgs) are provided.
- `include/net/ipv6.h`:
- `struct ipv6_txoptions::opt_flen` is `__u16` (wrap possible).
(lines 291-307, especially 298)
- `net/ipv6/datagram.c:ip6_datagram_send_ctl()`:
- Accepts repeated `IPV6_DSTOPTS` and accumulates into `opt_flen`
without rejecting duplicates. (lines 909-933)
- `net/ipv6/ip6_output.c:__ip6_append_data()`:
- Uses `opt->opt_flen + opt->opt_nflen` to compute header
sizes/headroom decisions. (lines 1448-1466, especially 1463-1465)
- `net/ipv6/ip6_output.c:__ip6_make_skb()`:
- Calls `ipv6_push_frag_opts()` if `opt->opt_flen` is non-zero.
(lines 1930-1934)
- `net/ipv6/exthdrs.c:ipv6_push_frag_opts()` / `ipv6_push_exthdr()`:
- Push size comes from `ipv6_optlen(opt->dst1opt)` (based on the
pointed-to header). (lines 1179-1185 and 1206-1211)
1. `opt_flen` is a 16-bit accumulator:
- `include/net/ipv6.h:298` defines `__u16 opt_flen; /* after fragment hdr */`.
2. `ip6_datagram_send_ctl()` accepts *repeated* `IPV6_DSTOPTS` cmsgs
and increments `opt_flen` each time:
- In `net/ipv6/datagram.c:909-933`, for `IPV6_DSTOPTS`:
- It computes `len = ((hdr->hdrlen + 1) << 3);`
- It checks `CAP_NET_RAW` using `ns_capable(net->user_ns,
CAP_NET_RAW)`. (line 922)
- Then it does:
- `opt->opt_flen += len;` (line 927)
- `opt->dst1opt = hdr;` (line 928)
There is no duplicate rejection here (unlike the legacy
`IPV6_2292DSTOPTS` path which rejects duplicates at
`net/ipv6/datagram.c:901-904`).
If enough large `IPV6_DSTOPTS` cmsgs are provided, `opt_flen` wraps
while `dst1opt` still points to a large (2048-byte)
destination-options header.
In the attached PoC (`poc.c`):
- 32 cmsgs with `hdrlen=255` => `len = (255+1)*8 = 2048`
- 1 cmsg with `hdrlen=0` => `len = 8`
- Total increment: `32*2048 + 8 = 65544`, so `(__u16)opt_flen == 8`
- The last cmsg is 2048 bytes, so `dst1opt` points to a 2048-byte header.
3. The transmit path sizes headers using the wrapped `opt_flen`:
- The `IPV6_DSTOPTS` cmsg path requires `CAP_NET_RAW` in the target
netns user namespace (`ns_capable(net->user_ns, CAP_NET_RAW)`).
- Root (or any task with `CAP_NET_RAW`) can trigger this without user
namespaces.
- An unprivileged `uid=1000` user can trigger this if unprivileged
user namespaces are enabled and it can create a userns+netns to obtain
namespaced `CAP_NET_RAW` (the attached PoC does this).
- Local denial of service: kernel BUG/panic (system crash).
- Reproducible with a small userspace PoC.
</quote>
This patch does not reject duplicated options, as this might break
some user applications.
Instead, it makes sure to adjust opt_flen and opt_nflen to correctly
reflect the size of the current option headers, preventing the overflows
and the potential for panics.
This applies to IPV6_DSTOPTS, IPV6_HOPOPTS, and IPV6_RTHDR.
Specifically:
When a new IPV6_DSTOPTS is processed, the length of the old opt->dst1opt
is subtracted from opt->opt_flen before adding the new length.
When a new IPV6_HOPOPTS is processed, the length of the old opt->dst0opt
is subtracted from opt->opt_nflen.
When a new Routing Header (IPV6_RTHDR or IPV6_2292RTHDR) is processed,
the length of the old opt->srcrt is subtracted from opt->opt_nflen.
In the special case within IPV6_2292RTHDR handling where dst1opt is moved
to dst0opt, the length of the old opt->dst0opt is subtracted from
opt->opt_nflen before the new one is added.
Fixes: 333fad5364d6 ("[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542).") Reported-by: Yiming Qian <yimingqian591@gmail.com> Closes: https://lore.kernel.org/netdev/CAL_bE8JNzawgr5OX5m+3jnQDHry2XxhQT5=jThW1zDPtUikRYA@mail.gmail.com/ Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260401154721.3740056-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
net: hsr: fixes for PRP duplication and VLAN unwind
This series addresses two logic bugs in the HSR/PRP implementation
identified during a protocol audit. These are targeted for the 'net'
tree as they fix potential memory corruption and state inconsistency.
The primary change resolves a race condition in the node merging path by
implementing address-based lock ordering. This ensures that concurrent
mutations of sequence blocks do not lead to state corruption or
deadlocks.
An additional fix corrects asymmetric VLAN error unwinding by
implementing a centralized unwind path on slave errors.
====================
Luka Gejak [Wed, 1 Apr 2026 09:22:43 +0000 (11:22 +0200)]
net: hsr: fix VLAN add unwind on slave errors
When vlan_vid_add() fails for a secondary slave, the error path calls
vlan_vid_del() on the failing port instead of the peer slave that had
already succeeded. This results in asymmetric VLAN state across the HSR
pair.
Fix this by switching to a centralized unwind path that removes the VID
from any slave device that was already programmed.
Luka Gejak [Wed, 1 Apr 2026 09:22:42 +0000 (11:22 +0200)]
net: hsr: serialize seq_blocks merge across nodes
During node merging, hsr_handle_sup_frame() walks node_curr->seq_blocks
to update node_real without holding node_curr->seq_out_lock. This
allows concurrent mutations from duplicate registration paths, risking
inconsistent state or XArray/bitmap corruption.
Fix this by locking both nodes' seq_out_lock during the merge.
To prevent ABBA deadlocks, locks are acquired in order of memory
address.
Reviewed-by: Felix Maurer <fmaurer@redhat.com> Fixes: 415e6367512b ("hsr: Implement more robust duplicate discard for PRP") Signed-off-by: Luka Gejak <luka.gejak@linux.dev> Link: https://patch.msgid.link/20260401092243.52121-2-luka.gejak@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vsock: initialize child_ns_mode_locked in vsock_net_init()
The `child_ns_mode_locked` field lives in `struct net`, which persists
across vsock module reloads. When the module is unloaded and reloaded,
`vsock_net_init()` resets `mode` and `child_ns_mode` back to their
default values, but does not reset `child_ns_mode_locked`.
The stale lock from the previous module load causes subsequent writes
to `child_ns_mode` to silently fail: `vsock_net_set_child_mode()` sees
the old lock, skips updating the actual value, and returns success
when the requested mode matches the stale lock. The sysctl handler
reports no error, but `child_ns_mode` remains unchanged.
Steps to reproduce:
$ modprobe vsock
$ echo local > /proc/sys/net/vsock/child_ns_mode
$ cat /proc/sys/net/vsock/child_ns_mode
local
$ modprobe -r vsock
$ modprobe vsock
$ echo local > /proc/sys/net/vsock/child_ns_mode
$ cat /proc/sys/net/vsock/child_ns_mode
global <--- expected "local"
Fix this by initializing `child_ns_mode_locked` to 0 (unlocked) in
`vsock_net_init()`, so the write-once mechanism works correctly after
module reload.
Fixes: 102eab95f025 ("vsock: lock down child_ns_mode as write-once") Reported-by: Jin Liu <jinl@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com> Link: https://patch.msgid.link/20260401092153.28462-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xiang Mei [Tue, 31 Mar 2026 05:02:17 +0000 (22:02 -0700)]
selftests/tc-testing: add tests for cls_fw and cls_flow on shared blocks
Regression tests for the shared-block NULL derefs fixed in the previous
two patches:
- fw: attempt to attach an empty fw filter to a shared block and
verify the configuration is rejected with EINVAL.
- flow: create a flow filter on a shared block without a baseclass
and verify the configuration is rejected with EINVAL.
Signed-off-by: Xiang Mei <xmei5@asu.edu> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/20260331050217.504278-3-xmei5@asu.edu Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xiang Mei [Tue, 31 Mar 2026 05:02:16 +0000 (22:02 -0700)]
net/sched: cls_flow: fix NULL pointer dereference on shared blocks
flow_change() calls tcf_block_q() and dereferences q->handle to derive
a default baseclass. Shared blocks leave block->q NULL, causing a NULL
deref when a flow filter without a fully qualified baseclass is created
on a shared block.
Check tcf_block_shared() before accessing block->q and return -EINVAL
for shared blocks. This avoids the null-deref shown below:
=======================================================================
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:flow_change (net/sched/cls_flow.c:508)
Call Trace:
tc_new_tfilter (net/sched/cls_api.c:2432)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6980)
[...]
=======================================================================
Fixes: 1abf272022cf ("net: sched: tcindex, fw, flow: use tcf_block_q helper to get struct Qdisc") Reported-by: Weiming Shi <bestswngs@gmail.com> Signed-off-by: Xiang Mei <xmei5@asu.edu> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20260331050217.504278-2-xmei5@asu.edu Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xiang Mei [Tue, 31 Mar 2026 05:02:15 +0000 (22:02 -0700)]
net/sched: cls_fw: fix NULL pointer dereference on shared blocks
The old-method path in fw_classify() calls tcf_block_q() and
dereferences q->handle. Shared blocks leave block->q NULL, causing a
NULL deref when an empty cls_fw filter is attached to a shared block
and a packet with a nonzero major skb mark is classified.
Reject the configuration in fw_change() when the old method (no
TCA_OPTIONS) is used on a shared block, since fw_classify()'s
old-method path needs block->q which is NULL for shared blocks.
The fixed null-ptr-deref calling stack:
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:fw_classify (net/sched/cls_fw.c:81)
Call Trace:
tcf_classify (./include/net/tc_wrapper.h:197 net/sched/cls_api.c:1764 net/sched/cls_api.c:1860)
tc_run (net/core/dev.c:4401)
__dev_queue_xmit (net/core/dev.c:4535 net/core/dev.c:4790)
Fixes: 1abf272022cf ("net: sched: tcindex, fw, flow: use tcf_block_q helper to get struct Qdisc") Reported-by: Weiming Shi <bestswngs@gmail.com> Signed-off-by: Xiang Mei <xmei5@asu.edu> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20260331050217.504278-1-xmei5@asu.edu Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Martin Schiller [Tue, 31 Mar 2026 07:43:17 +0000 (09:43 +0200)]
net/x25: Fix potential double free of skb
When alloc_skb fails in x25_queue_rx_frame it calls kfree_skb(skb) at
line 48 and returns 1 (error).
This error propagates back through the call chain:
x25_queue_rx_frame returns 1
|
v
x25_state3_machine receives the return value 1 and takes the else
branch at line 278, setting queued=0 and returning 0
|
v
x25_process_rx_frame returns queued=0
|
v
x25_backlog_rcv at line 452 sees queued=0 and calls kfree_skb(skb)
again
This would free the same skb twice. Looking at x25_backlog_rcv:
Merge tag 'asoc-fix-v7.0-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.0
Another smallish batch of fixes and quirks, these days it's AMD that is
getting all the DMI entries added. We've got one core fix for a missing
list initialisation with auxiliary devices, otherwise it's all fairly
small things.
Jakub Kicinski [Thu, 2 Apr 2026 03:13:00 +0000 (20:13 -0700)]
Merge branch 'bnxt_en-bug-fixes'
Michael Chan says:
====================
bnxt_en: Bug fixes
The first patch is a refactor patch needed by the second patch to
fix XDP ring initialization during FW reset. The third patch
fixes an issue related to stats context reservation for RoCE.
====================
Pavan Chebbi [Tue, 31 Mar 2026 06:51:38 +0000 (23:51 -0700)]
bnxt_en: Restore default stat ctxs for ULP when resource is available
During resource reservation, if the L2 driver does not have enough
MSIX vectors to provide to the RoCE driver, it sets the stat ctxs for
ULP also to 0 so that we don't have to reserve it unnecessarily.
However, subsequently the user may reduce L2 rings thereby freeing up
some resources that the L2 driver can now earmark for RoCE. In this
case, the driver should restore the default ULP stat ctxs to make
sure that all RoCE resources are ready for use.
The RoCE driver may fail to initialize in this scenario without this
fix.
Fixes: d630624ebd70 ("bnxt_en: Utilize ulp client resources if RoCE is not registered") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20260331065138.948205-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan [Tue, 31 Mar 2026 06:51:37 +0000 (23:51 -0700)]
bnxt_en: Don't assume XDP is never enabled in bnxt_init_dflt_ring_mode()
The original code made the assumption that when we set up the initial
default ring mode, we must be just loading the driver and XDP cannot
be enabled yet. This is not true when the FW goes through a resource
or capability change. Resource reservations will be cancelled and
reinitialized with XDP already enabled. devlink reload with XDP enabled
will also have the same issue. This scenario will cause the ring
arithmetic to be all wrong in the bnxt_init_dflt_ring_mode() path
causing failure:
bnxt_en 0000:a1:00.0 ens2f0np0: bnxt_setup_int_mode err: ffffffea
bnxt_en 0000:a1:00.0 ens2f0np0: bnxt_request_irq err: ffffffea
bnxt_en 0000:a1:00.0 ens2f0np0: nic open fail (rc: ffffffea)
Fix it by properly accounting for XDP in the bnxt_init_dflt_ring_mode()
path by using the refactored helper functions in the previous patch.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Fixes: ec5d31e3c15d ("bnxt_en: Handle firmware reset status during IF_UP.") Fixes: 228ea8c187d8 ("bnxt_en: implement devlink dev reload driver_reinit") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20260331065138.948205-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan [Tue, 31 Mar 2026 06:51:36 +0000 (23:51 -0700)]
bnxt_en: Refactor some basic ring setup and adjustment logic
Refactor out the basic code that trims the default rings, sets up and
adjusts XDP TX rings and CP rings. There is no change in behavior.
This is to prepare for the next bug fix patch.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20260331065138.948205-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Saeed Mahameed [Mon, 30 Mar 2026 19:40:15 +0000 (22:40 +0300)]
net/mlx5: Fix switchdev mode rollback in case of failure
If for some internal reason switchdev mode fails, we rollback to legacy
mode, before this patch, rollback will unregister the uplink netdev and
leave it unregistered causing the below kernel bug.
To fix this, we need to avoid netdev unregister by setting the proper
rollback flag 'MLX5_PRIV_FLAGS_SWITCH_LEGACY' to indicate legacy mode.
Saeed Mahameed [Mon, 30 Mar 2026 19:40:14 +0000 (22:40 +0300)]
net/mlx5: Avoid "No data available" when FW version queries fail
Avoid printing the misleading "kernel answers: No data available" devlink
output when querying firmware or pending firmware version fails
(e.g. MLX5 fw state errors / flash failures).
FW can fail on loading the pending flash image and get its version due
to various reasons, examples:
mlxfw: Firmware flash failed: key not applicable, err (7)
mlx5_fw_image_pending: can't read pending fw version while fw state is 1
and the resulting:
$ devlink dev info
kernel answers: No data available
Instead, just report 0 or 0xfff.. versions in case of failure to indicate
a problem, and let other information be shown.
after the fix:
$ devlink dev info
pci/0000:00:06.0:
driver mlx5_core
serial_number xxx...
board.serial_number MT2225300179
versions:
fixed:
fw.psid MT_0000000436
running:
fw.version 22.41.0188
fw 22.41.0188
stored:
fw.version 255.255.65535
fw 255.255.65535
Shay Drory [Mon, 30 Mar 2026 19:40:13 +0000 (22:40 +0300)]
net/mlx5: lag: Check for LAG device before creating debugfs
__mlx5_lag_dev_add_mdev() may return 0 (success) even when an error
occurs that is handled gracefully. Consequently, the initialization
flow proceeds to call mlx5_ldev_add_debugfs() even when there is no
valid LAG context.
mlx5_ldev_add_debugfs() blindly created the debugfs directory and
attributes. This exposed interfaces (like the members file) that rely on
a valid ldev pointer, leading to potential NULL pointer dereferences if
accessed when ldev is NULL.
Add a check to verify that mlx5_lag_dev(dev) returns a valid pointer
before attempting to create the debugfs entries.
Fixes: 7f46a0b7327a ("net/mlx5: Lag, add debugfs to query hardware lag state") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20260330194015.53585-2-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fedor Pchelkin [Mon, 30 Mar 2026 18:45:40 +0000 (21:45 +0300)]
net: macb: fix clk handling on PCI glue driver removal
platform_device_unregister() may still want to use the registered clks
during runtime resume callback.
Note that there is a commit d82d5303c4c5 ("net: macb: fix use after free
on rmmod") that addressed the similar problem of clk vs platform device
unregistration but just moved the bug to another place.
Save the pointers to clks into local variables for reuse after platform
device is unregistered.
BUG: KASAN: use-after-free in clk_prepare+0x5a/0x60
Read of size 8 at addr ffff888104f85e00 by task modprobe/597
Srujana Challa [Thu, 26 Mar 2026 14:23:44 +0000 (19:53 +0530)]
virtio_net: clamp rss_max_key_size to NETDEV_RSS_KEY_LEN
rss_max_key_size in the virtio spec is the maximum key size supported by
the device, not a mandatory size the driver must use. Also the value 40
is a spec minimum, not a spec maximum.
The current code rejects RSS and can fail probe when the device reports a
larger rss_max_key_size than the driver buffer limit. Instead, clamp the
effective key length to min(device rss_max_key_size, NETDEV_RSS_KEY_LEN)
and keep RSS enabled.
This keeps probe working on devices that advertise larger maximum key sizes
while respecting the netdev RSS key buffer size limit.
Fixes: 3f7d9c1964fc ("virtio_net: Add hash_key_length check") Cc: stable@vger.kernel.org Signed-off-by: Srujana Challa <schalla@marvell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://patch.msgid.link/20260326142344.1171317-1-schalla@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yucheng Lu [Tue, 31 Mar 2026 08:00:21 +0000 (16:00 +0800)]
net/sched: sch_netem: fix out-of-bounds access in packet corruption
In netem_enqueue(), the packet corruption logic uses
get_random_u32_below(skb_headlen(skb)) to select an index for
modifying skb->data. When an AF_PACKET TX_RING sends fully non-linear
packets over an IPIP tunnel, skb_headlen(skb) evaluates to 0.
Passing 0 to get_random_u32_below() takes the variable-ceil slow path
which returns an unconstrained 32-bit random integer. Using this
unconstrained value as an offset into skb->data results in an
out-of-bounds memory access.
Fix this by verifying skb_headlen(skb) is non-zero before attempting
to corrupt the linear data area. Fully non-linear packets will silently
bypass the corruption logic.
Fixes: c865e5d99e25 ("[PKT_SCHED] netem: packet corruption option") Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Signed-off-by: Yuan Tan <tanyuan98@outlook.com> Signed-off-by: Xin Liu <bird@lzu.edu.cn> Signed-off-by: Yuhang Zheng <z1652074432@gmail.com> Signed-off-by: Yucheng Lu <kanolyc@gmail.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Link: https://patch.msgid.link/45435c0935df877853a81e6d06205ac738ec65fa.1774941614.git.kanolyc@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 2 Apr 2026 02:19:35 +0000 (19:19 -0700)]
Merge tag 'nf-26-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net. Note that most
of the bugs fixed here are >5 years old. The large PR is not due to an
increase in regressions.
1) Flowtable hardware offload support in IPv6 can lead to out-of-bounds
when populating the rule action array when combined with double-tagged
vlan. Bump the maximum number of actions from 16 to 24 and check that
such limit is never reached, otherwise bail out. This bugs stems from
the original flowtable hardware offload support.
2) nfnetlink_log does not include the netlink header size of the trailing
NLMSG_DONE message when calculating the skb size. From Florian Westphal.
3) Reject names in xt_cgroup and xt_rateest extensions which are not
nul-terminated. Also from Florian.
4) Use nla_strcmp in ipset lookup by set name, since IPSET_ATTR_NAME and
IPSET_ATTR_NAMEREF are of NLA_STRING type. From Florian Westphal.
5) When unregistering conntrack helpers, pass the helper that is going
away so the expectation cleanup is done accordingly, otherwise UaF is
possible when accessing expectation that refer to the helper that is
gone. From Qi Tang.
6) Zero expectation NAT fields to address leaking kernel memory through
the expectation netlink dump when unset. Also from Qi Tang.
7) Use the master conntrack helper when creating expectations via
ctnetlink, ignore the suggested helper through CTA_EXPECT_HELP_NAME.
This allows to address a possible read of kernel memory off the
expectation object boundary.
8) Fix incorrect release of the hash bucket logic in ipset when the
bucket is empty, leading to shrinking the hash bucket to size 0
which deals to out-of-bound write in next element additions.
From Yifan Wu.
9) Allow the use of x_tables extensions that explicitly declare
NFPROTO_ARP support only. This is to avoid an incorrect hook number
validation due to non-overlapping arp and inet hook number
definitions.
10) Reject immediate NF_QUEUE verdict in nf_tables. The userspace
nft tool always uses the nft_queue expression for queueing.
This ensures this verdict cannot be used for the arp family,
which does supported this.
* tag 'nf-26-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: reject immediate NF_QUEUE verdict
netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARP
netfilter: ipset: drop logically empty buckets in mtype_del
netfilter: ctnetlink: ignore explicit helper on new expectations
netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent
netfilter: nf_conntrack_helper: pass helper to expect cleanup
netfilter: ipset: use nla_strcmp for IPSET_ATTR_NAME attr
netfilter: x_tables: ensure names are nul-terminated
netfilter: nfnetlink_log: account for netlink header size
netfilter: flowtable: strictly check for maximum number of actions
====================
Weiming Shi [Mon, 30 Mar 2026 16:32:38 +0000 (00:32 +0800)]
rds: ib: reject FRMR registration before IB connection is established
rds_ib_get_mr() extracts the rds_ib_connection from conn->c_transport_data
and passes it to rds_ib_reg_frmr() for FRWR memory registration. On a
fresh outgoing connection, ic is allocated in rds_ib_conn_alloc() with
i_cm_id = NULL because the connection worker has not yet called
rds_ib_conn_path_connect() to create the rdma_cm_id. When sendmsg() with
RDS_CMSG_RDMA_MAP is called on such a connection, the sendmsg path parses
the control message before any connection establishment, allowing
rds_ib_post_reg_frmr() to dereference ic->i_cm_id->qp and crash the
kernel.
The existing guard in rds_ib_reg_frmr() only checks for !ic (added in
commit 9e630bcb7701), which does not catch this case since ic is allocated
early and is always non-NULL once the connection object exists.
Add a check in rds_ib_get_mr() that verifies ic, i_cm_id, and qp are all
non-NULL before proceeding with FRMR registration, mirroring the guard
already present in rds_ib_post_inv(). Return -ENODEV when the connection
is not ready, which the existing error handling in rds_cmsg_send() converts
to -EAGAIN for userspace retry and triggers rds_conn_connect_if_down() to
start the connection worker.
Fixes: 1659185fb4d0 ("RDS: IB: Support Fastreg MR (FRMR) memory registration mode") Reported-by: Xiang Mei <xmei5@asu.edu> Signed-off-by: Weiming Shi <bestswngs@gmail.com> Reviewed-by: Allison Henderson <achender@kernel.org> Link: https://patch.msgid.link/20260330163237.2752440-2-bestswngs@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When two CPUs process Router Advertisement packets for the same router
simultaneously, they can both arrive at fib6_metric_set() with the same
fib6_info pointer whose fib6_metrics still points to dst_default_metrics.
Fix this by:
- Set val for p->metrics before published via cmpxchg() so the metrics
value is ready before the pointer becomes visible to other CPUs.
- Replace the plain pointer store with cmpxchg() and free the allocation
safely when competition failed.
- Add READ_ONCE()/WRITE_ONCE() for metrics[] setting in the non-default
metrics path to prevent compiler-based data races.
Fixes: d4ead6b34b67 ("net/ipv6: move metrics from dst to rt6_info") Reported-by: Fei Liu <feliu@redhat.com> Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260331-b4-fib6_metric_set-kmemleak-v3-1-88d27f4d8825@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hkbinbin [Tue, 31 Mar 2026 05:39:16 +0000 (05:39 +0000)]
Bluetooth: hci_sync: fix stack buffer overflow in hci_le_big_create_sync
hci_le_big_create_sync() uses DEFINE_FLEX to allocate a
struct hci_cp_le_big_create_sync on the stack with room for 0x11 (17)
BIS entries. However, conn->num_bis can hold up to HCI_MAX_ISO_BIS (31)
entries — validated against ISO_MAX_NUM_BIS (0x1f) in the caller
hci_conn_big_create_sync(). When conn->num_bis is between 18 and 31,
the memcpy that copies conn->bis into cp->bis writes up to 14 bytes
past the stack buffer, corrupting adjacent stack memory.
This is trivially reproducible: binding an ISO socket with
bc_num_bis = ISO_MAX_NUM_BIS (31) and calling listen() will
eventually trigger hci_le_big_create_sync() from the HCI command
sync worker, causing a KASAN-detectable stack-out-of-bounds write:
BUG: KASAN: stack-out-of-bounds in hci_le_big_create_sync+0x256/0x3b0
Write of size 31 at addr ffffc90000487b48 by task kworker/u9:0/71
Fix this by changing the DEFINE_FLEX count from the incorrect 0x11 to
HCI_MAX_ISO_BIS, which matches the maximum number of BIS entries that
conn->bis can actually carry.
Fixes: 42ecf1947135 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending") Cc: stable@vger.kernel.org Signed-off-by: hkbinbin <hkbinbinbin@gmail.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Oleh Konko [Tue, 31 Mar 2026 11:52:13 +0000 (11:52 +0000)]
Bluetooth: SMP: derive legacy responder STK authentication from MITM state
The legacy responder path in smp_random() currently labels the stored
STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH.
That reflects what the local service requested, not what the pairing
flow actually achieved.
For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear
and the resulting STK should remain unauthenticated even if the local
side requested HIGH security. Use the established MITM state when
storing the responder STK so the key metadata matches the pairing result.
This also keeps the legacy path aligned with the Secure Connections code,
which already treats JUST_WORKS/JUST_CFM as unauthenticated.
Fixes: fff3490f4781 ("Bluetooth: Fix setting correct authentication information for SMP STK") Cc: stable@vger.kernel.org Signed-off-by: Oleh Konko <security@1seal.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Oleh Konko [Tue, 31 Mar 2026 11:52:12 +0000 (11:52 +0000)]
Bluetooth: SMP: force responder MITM requirements before building the pairing response
smp_cmd_pairing_req() currently builds the pairing response from the
initiator auth_req before enforcing the local BT_SECURITY_HIGH
requirement. If the initiator omits SMP_AUTH_MITM, the response can
also omit it even though the local side still requires MITM.
tk_request() then sees an auth value without SMP_AUTH_MITM and may
select JUST_CFM, making method selection inconsistent with the pairing
policy the responder already enforces.
When the local side requires HIGH security, first verify that MITM can
be achieved from the IO capabilities and then force SMP_AUTH_MITM in the
response in both rsp.auth_req and auth. This keeps the responder auth bits
and later method selection aligned.
Fixes: 2b64d153a0cc ("Bluetooth: Add MITM mechanism to LE-SMP") Cc: stable@vger.kernel.org Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: Oleh Konko <security@1seal.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
mesh_send() currently bounds MGMT_OP_MESH_SEND by total command
length, but it never verifies that the bytes supplied for the
flexible adv_data[] array actually match the embedded adv_data_len
field. MGMT_MESH_SEND_SIZE only covers the fixed header, so a
truncated command can still pass the existing 20..50 byte range
check and later drive the async mesh send path past the end of the
queued command buffer.
Keep rejecting zero-length and oversized advertising payloads, but
validate adv_data_len explicitly and require the command length to
exactly match the flexible array size before queueing the request.
Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh") Reported-by: Keenan Dong <keenanat2000@gmail.com> Signed-off-by: Keenan Dong <keenanat2000@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
projects / ceph-client.git / log