====================
net: dsa: mxl-gsw1xx: setup polarities and validate chip
Now that common PHY properties make it easy to configure the SerDes RX
and TX polarities, use that for the SGMII/1000Base-X/2500Base-X port of
the MaxLinear GSW1xx switches.
Also, validate hardware in probe() function to make sure the switch is
actually present and MDIO communication works properly.
====================
Daniel Golle [Sun, 1 Feb 2026 03:42:18 +0000 (03:42 +0000)]
net: dsa: mxl-gsw1xx: validate chip ID
No check for actually present hardware is being performed in the probe
function of the mxl-gsw1xx switch driver. So even if the switch isn't
present at the configured MDIO bus address the driver wrongly tells the
user that a "GSWIP version 0 mod 0" was found, outputting errors about
PHY capabilities not matching.
Read and validate the chip MANU_ID and PNUM_ID registers and output
information while probing, but return an error and abort probing in case
the hardware is not actually present.
Daniel Golle [Sun, 1 Feb 2026 03:42:00 +0000 (03:42 +0000)]
net: dsa: mxl-gsw1xx: configure SerDes port polarities
Configure SerDes (port 4) RX and TX polarities using the newly
introduced generic properties. The polarities are described at the port
level which equals the polarities of the external pins of the chip.
Note that the RX lane is inverted internally and the vendor driver
simply always sets bit GSW1XX_SGMII_PHY_RX0_CFG2_INVERT unconditionally
to end up with the correct (ie. as documented in datasheets) polarity at
the external pins.
In this sense, PHY_POLARITY_NORMAL denotes normal polarity for pins as
documented for the MRQFN 105-pin package (GSW120, GSW125, GSW140, GSW141
and GSW145 all use the same package and have identical pin layouts
except for TP port 2 and 3 being N/C on GSW12x):
pin B18 (TX0_P) positive signal of the differential SGMII data output pair
pin B19 (TX0_M) negative signal of the differential SGMII data output pair
pin B20 (RX0_P) positive signal of the differential SGMII data input pair
pin B21 (RX0_M) negative signal of the differential SGMII data input pair
====================
net: stats, tools, driver tests for HW GRO [part]
Add miscellaneous pieces related to production use of HW-GRO:
- report standard stats from drivers (bnxt included here,
Gal recently posted patches for mlx5 which is great)
- CLI tool for calculating HW GRO savings / effectiveness
====================
Jakub Kicinski [Sat, 7 Feb 2026 00:35:03 +0000 (16:35 -0800)]
tools: ynltool: add qstats analysis for HW-GRO efficiency / savings
Extend ynltool to compute HW GRO savings metric - how many
packets has HW GRO been able to save the kernel from seeing.
Note that this definition does not actually take into account
whether the segments were or weren't eligible for HW GRO.
If a machine is receiving all-UDP traffic - new metric will show
HW-GRO savings of 0%. Conversely since the super-packet still
counts as a received packet, savings of 100% is not achievable.
Perfect HW-GRO on a machine with 4k MTU and 64kB super-frames
would show ~93.75% savings. With 1.5k MTU we may see up to
~97.8% savings (if my math is right).
Example after 10 sec of iperf on a freshly booted machine
with 1.5k MTU:
None of the NICs I have access to can report "missed" HW-GRO
opportunities so computing a true "effectiveness" metric
is not possible. One could also argue that effectiveness metric
is inferior in environments where we control both senders and
receivers, the savings metrics will capture both regressions
in receiver's HW GRO effectiveness but also regressions in senders
sending smaller TSO trains. And we care about both. The main
downside is that it's hard to tell at a glance how well the NIC
is doing because the savings will be dependent on traffic patterns.
Jakub Kicinski [Sat, 7 Feb 2026 00:35:01 +0000 (16:35 -0800)]
eth: bnxt: gather and report HW-GRO stats
Count and report HW-GRO stats as seen by the kernel.
The device stats for GRO seem to not reflect the reality,
perhaps they count sessions which did not actually result
in any aggregation. Also they count wire packets, so we
have to count super-frames, anyway.
Linus Torvalds [Tue, 10 Feb 2026 04:53:18 +0000 (20:53 -0800)]
Merge tag 'docs-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux
Pull documentation updates from Jonathan Corbet:
"A slightly calmer cycle for docs this time around, though there is
still a fair amount going on, including:
- Some signs of life on the long-moribund Japanese translation
- Documentation on policies around the use of generative tools for
patch submissions, and a separate document intended for consumption
by generative tools
- The completion of the move of the documentation tools to
tools/docs. For now we're leaving a /scripts/kernel-doc symlink
behind to avoid breaking scripts
- Ongoing build-system work includes the incorporation of
documentation in Python code, better support for documenting
variables, and lots of improvements and fixes
- Automatic linking of man-page references -- cat(1), for example --
to the online pages in the HTML build
...and the usual array of typo fixes and such"
* tag 'docs-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (107 commits)
doc: development-process: add notice on testing
tools: sphinx-build-wrapper: improve its help message
docs: sphinx-build-wrapper: allow -v override -q
docs: kdoc: Fix pdfdocs build for tools
docs: ja_JP: process: translate 'Obtain a current source tree'
docs: fix 're-use' -> 'reuse' in documentation
docs: ioctl-number: fix a typo in ioctl-number.rst
docs: filesystems: ensure proc pid substitutable is complete
docs: automarkup.py: Skip common English words as C identifiers
Documentation: use a source-read extension for the index link boilerplate
docs: parse_features: make documentation more consistent
docs: add parse_features module documentation
docs: jobserver: do some documentation improvements
docs: add jobserver module documentation
docs: kabi: helpers: add documentation for each "enum" value
docs: kabi: helpers: add helper for debug bits 7 and 8
docs: kabi: system_symbols: end docstring phrases with a dot
docs: python: abi_regex: do some improvements at documentation
docs: python: abi_parser: do some improvements at documentation
docs: add kabi modules documentation
...
Linus Torvalds [Tue, 10 Feb 2026 04:49:19 +0000 (20:49 -0800)]
Merge tag 'efi-next-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Quirk the broken EFI framebuffer geometry on the Valve Steam Deck
- Capture the EDID information of the primary display also on non-x86
EFI systems when booting via the EFI stub.
* tag 'efi-next-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Support EDID information
sysfb: Move edid_info into sysfb_primary_display
sysfb: Pass sysfb_primary_display to devices
sysfb: Replace screen_info with sysfb_primary_display
sysfb: Add struct sysfb_display_info
efi: sysfb_efi: Reduce number of references to global screen_info
efi: earlycon: Reduce number of references to global screen_info
efi: sysfb_efi: Fix efidrmfb and simpledrmfb on Valve Steam Deck
efi: sysfb_efi: Convert swap width and height quirk to a callback
efi: sysfb_efi: Fix lfb_linelength calculation when applying quirks
efi: sysfb_efi: Replace open coded swap with the macro
Linus Torvalds [Tue, 10 Feb 2026 04:38:27 +0000 (20:38 -0800)]
Merge tag 'for-linus-7.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- fix running as Xen PVH guest in 32-bit mode without PAE
- fix PV device handling for suspend/resume when running as
a Xen guest
- clean up workqueue usage
- fix the Xen balloon driver for PVH dom0
- introduce the possibility to use hypercalls for console
messages in unprivileged guests
- enable Xen dom0 use of virtio devices in nested virtualization
setups
- simplify the xen-mcelog driver
* tag 'for-linus-7.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xenbus: Rename helpers to freeze/thaw/restore
xenbus: Use .freeze/.thaw to handle xenbus devices
xen/mcelog: simplify MCE_GETCLEAR_FLAGS using xchg()
xen/balloon: improve accuracy of initial balloon target for dom0
Partial revert "x86/xen: fix balloon target initialization for PVH dom0"
xen: introduce xen_console_io option
xen/virtio: Don't use grant-dma-ops when running as Dom0
x86/xen/pvh: Enable PAE mode for 32-bit guest only when CONFIG_X86_PAE is set
xen: privcmd: WQ_PERCPU added to alloc_workqueue users
xen/events: replace use of system_wq with system_percpu_wq
Linus Torvalds [Tue, 10 Feb 2026 04:28:45 +0000 (20:28 -0800)]
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's a little less than normal, probably due to LPC & Christmas/New
Year meaning that a few series weren't quite ready or reviewed in
time. It's still useful across the board, despite the only real
feature being support for the LS64 feature enabling 64-byte atomic
accesses to endpoints that support it.
ACPI:
- Add interrupt signalling support to the AGDI handler
- Add Catalin and myself to the arm64 ACPI MAINTAINERS entry
CPU features:
- Drop Kconfig options for PAN and LSE (these are detected at runtime)
- Add support for 64-byte single-copy atomic instructions (LS64/LS64V)
- Reduce MTE overhead when executing in the kernel on Ampere CPUs
- Ensure POR_EL0 value exposed via ptrace is up-to-date
- Fix error handling on GCS allocation failure
CPU frequency:
- Add CPU hotplug support to the FIE setup in the AMU driver
Entry code:
- Minor optimisations and cleanups to the syscall entry path
- Preparatory rework for moving to the generic syscall entry code
Hardware errata:
- Work around Spectre-BHB on TSV110 processors
- Work around broken CMO propagation on some systems with the SI-L1
interconnect
Miscellaneous:
- Disable branch profiling for arch/arm64/ to avoid issues with
noinstr
- Minor fixes and cleanups (kexec + ubsan, WARN_ONCE() instead of
WARN_ON(), reduction of boolean expression)
- Fix custom __READ_ONCE() implementation for LTO builds when
operating on non-atomic types
Perf and PMUs:
- Support for CMN-600AE
- Be stricter about supported hardware in the CMN driver
- Support for DSU-110 and DSU-120
- Support for the cycles event in the DSU driver (alongside the
dedicated cycles counter)
- Use IRQF_NO_THREAD instead of IRQF_ONESHOT in the cxlpmu driver
- Use !bitmap_empty() as a faster alternative to bitmap_weight()
- Fix SPE error handling when failing to resume profiling
Selftests:
- Add support for the FORCE_TARGETS option to the arm64 kselftests
- Avoid nolibc-specific my_syscall() function
- Add basic test for the LS64 HWCAP
- Extend fp-pidbench to cover additional workload patterns"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (43 commits)
perf/arm-cmn: Reject unsupported hardware configurations
perf: arm_spe: Properly set hw.state on failures
arm64/gcs: Fix error handling in arch_set_shadow_stack_status()
arm64: Fix non-atomic __READ_ONCE() with CONFIG_LTO=y
arm64: poe: fix stale POR_EL0 values for ptrace
kselftest/arm64: Raise default number of loops in fp-pidbench
kselftest/arm64: Add a no-SVE loop after SVE in fp-pidbench
perf/cxlpmu: Replace IRQF_ONESHOT with IRQF_NO_THREAD
arm64: mte: Set TCMA1 whenever MTE is present in the kernel
arm64/ptrace: Return early for ptrace_report_syscall_entry() error
arm64/ptrace: Split report_syscall()
arm64: Remove unused _TIF_WORK_MASK
kselftest/arm64: Add missing file in .gitignore
arm64: errata: Workaround for SI L1 downstream coherency issue
kselftest/arm64: Add HWCAP test for FEAT_LS64
arm64: Add support for FEAT_{LS64, LS64_V}
KVM: arm64: Enable FEAT_{LS64, LS64_V} in the supported guest
arm64: Provide basic EL2 setup for FEAT_{LS64, LS64_V} usage at EL0/1
KVM: arm64: Handle DABT caused by LS64* instructions on unsupported memory
KVM: arm64: Add documentation for KVM_EXIT_ARM_LDST64B
...
Linus Torvalds [Tue, 10 Feb 2026 04:20:17 +0000 (20:20 -0800)]
Merge tag 'sparc-for-7.0-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Hardcode uapi ioctls.h TC* constants to not rely upon struct termio
that has been dropped by glibc
- Fix bug for fork/clone and add support for clone3
- Add ARCH_HAS_CC_CAN_LINK
- API choice improvements and cleanup of unused variables
* tag 'sparc-for-7.0-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
sparc: remove unused variable strtab
sparc64: fix unused variable warning
sparc: don't reference obsolete termio struct for TC* constants
sparc: vio: Replace snprintf with strscpy in vio_create_one
sparc: Add architecture support for clone3
sparc: Synchronize user stack on fork and clone
sparc: Implement ARCH_HAS_CC_CAN_LINK
Linus Torvalds [Tue, 10 Feb 2026 04:18:59 +0000 (20:18 -0800)]
Merge tag 'm68k-for-v7.0-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Add missing put_device() in the NuBus driver
- Replace vsprintf() with vsnprintf() on Sun-3
* tag 'm68k-for-v7.0-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: sun3: Replace vsprintf() with bounded vsnprintf()
nubus: Call put_device() in bus initialization error path
Linus Torvalds [Tue, 10 Feb 2026 04:17:03 +0000 (20:17 -0800)]
Merge tag 's390-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Drop support for outdated 3590/3592 and 3480 tape devices, and limit
support to virtualized 3490E types devices
- Implement exception based WARN() and WARN_ONCE() similar to x86
- Slightly optimize preempt primitives like __preempt_count_add() and
__preempt_count_dec_and_test()
- A couple of small fixes and improvements
* tag 's390-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (35 commits)
s390/tape: Consolidate tape config options and modules
s390/cio: Fix device lifecycle handling in css_alloc_subchannel()
s390/tape: Rename tape_34xx.c to tape_3490.c
s390/tape: Cleanup sense data analysis and error handling
s390/tape: Remove 3480 tape device type
s390/tape: Remove unused command definitions
s390/tape: Remove special block id handling
s390/tape: Remove tape load display support
s390/tape: Remove support for 3590/3592 models
s390/kexec: Emit an error message when cmdline is too long
s390/configs: Enable BLK_DEV_NULL_BLK as module
s390: Document s390 stackprotector support
s390/perf: Disable register readout on sampling events
s390/Kconfig: Define non-zero ILLEGAL_POINTER_VALUE
s390/bug: Prevent tail-call optimization
s390/bug: Skip __WARN_trap() in call traces
s390/bug: Implement WARN_ONCE()
s390/bug: Implement __WARN_printf()
s390/traps: Copy monitor code to pt_regs
s390/bug: Introduce and use monitor code macro
...
Linus Torvalds [Tue, 10 Feb 2026 04:15:14 +0000 (20:15 -0800)]
Merge tag 'nolibc-20260206-for-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh:
- All time-related functionality uses 64-bit timestamps for
y2038 compatibility
- fread() and fskeek() support
- ptrace() support
- Addition of libc-test to the regular kselftests
- Smaller cleanups and fixes to the code and build system
* tag 'nolibc-20260206-for-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (25 commits)
tools/nolibc: Add a simple test for writing to a FILE and reading it back
tools/nolibc: Add fseek() to stdio.h
tools/nolibc: Add fread() to stdio.h
selftests/nolibc: also test libc-test through regular selftest framework
selftests/nolibc: scope custom flags to the nolibc-test target
selftests/nolibc: try to read from stdin in readv_zero test
selftests/nolibc: always build sparc32 tests with -mcpu=v8
tools/nolibc: align sys_vfork() with sys_fork()
selftests/nolibc: drop NOLIBC_SYSROOT=0 logic
selftests/nolibc: add static assertions around time types handling
tools/nolibc: add __nolibc_static_assert()
tools/nolibc: add compiler version detection macros
tools/nolibc: remove time conversions
selftests/nolibc: test compatibility of nolibc and kernel time types
tools/nolibc: always use 64-bit time types
tools/nolibc: use custom structs timespec and timeval
tools/nolibc/select: avoid libgcc 64-bit multiplications
tools/nolibc/gettimeofday: avoid libgcc 64-bit divisions
tools/nolibc: prefer explicit 64-bit time-related system calls
tools/nolibc/time: drop invocation of gettimeofday system call
...
Linus Torvalds [Tue, 10 Feb 2026 03:57:30 +0000 (19:57 -0800)]
Merge tag 'kthread-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthread updates from Frederic Weisbecker:
"The kthread code provides an infrastructure which manages the
preferred affinity of unbound kthreads (node or custom cpumask)
against housekeeping (CPU isolation) constraints and CPU hotplug
events.
One crucial missing piece is the handling of cpuset: when an isolated
partition is created, deleted, or its CPUs updated, all the unbound
kthreads in the top cpuset become indifferently affine to _all_ the
non-isolated CPUs, possibly breaking their preferred affinity along
the way.
Solve this with performing the kthreads affinity update from cpuset to
the kthreads consolidated relevant code instead so that preferred
affinities are honoured and applied against the updated cpuset
isolated partitions.
The dispatch of the new isolated cpumasks to timers, workqueues and
kthreads is performed by housekeeping, as per the nice Tejun's
suggestion.
As a welcome side effect, HK_TYPE_DOMAIN then integrates both the set
from boot defined domain isolation (through isolcpus=) and cpuset
isolated partitions. Housekeeping cpumasks are now modifiable with a
specific RCU based synchronization. A big step toward making
nohz_full= also mutable through cpuset in the future"
* tag 'kthread-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: (33 commits)
doc: Add housekeeping documentation
kthread: Document kthread_affine_preferred()
kthread: Comment on the purpose and placement of kthread_affine_node() call
kthread: Honour kthreads preferred affinity after cpuset changes
sched/arm64: Move fallback task cpumask to HK_TYPE_DOMAIN
sched: Switch the fallback task allowed cpumask to HK_TYPE_DOMAIN
kthread: Rely on HK_TYPE_DOMAIN for preferred affinity management
kthread: Include kthreadd to the managed affinity list
kthread: Include unbound kthreads in the managed affinity list
kthread: Refine naming of affinity related fields
PCI: Remove superfluous HK_TYPE_WQ check
sched/isolation: Remove HK_TYPE_TICK test from cpu_is_isolated()
cpuset: Remove cpuset_cpu_is_isolated()
timers/migration: Remove superfluous cpuset isolation test
cpuset: Propagate cpuset isolation update to timers through housekeeping
cpuset: Propagate cpuset isolation update to workqueue through housekeeping
PCI: Flush PCI probe workqueue on cpuset isolated partition change
sched/isolation: Flush vmstat workqueues on cpuset isolated partition change
sched/isolation: Flush memcg workqueues on cpuset isolated partition change
cpuset: Update HK_TYPE_DOMAIN cpumask from cpuset
...
Linus Torvalds [Tue, 10 Feb 2026 03:33:44 +0000 (19:33 -0800)]
Merge tag 'thermal-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add support for "slow" (long-term trend) workload type hints to
the Intel int340x thermal driver and selftests (and enable it for
Panther Lake), add support for MT8196 along with DT bindings and for
MT7987 to the Mediatek LVTS thermal driver, add support for RZ/T2H and
RZ/N2H along with DT bindings to the Renesas rzg3e thermal driver, add
support for the Panther Lake, Wildcat Lake and Nova Lake processors to
the intel_tcc_cooling driver, fix bugs, make some cosmetic changes
including code cleanups and library function substitutions, and update
documentation.
Specifics:
- Add Panther Lake, Wildcat Lake and Nova Lake processor IDs to the
list of supported processors in the intel_tcc_cooling thermal
driver (Srinivas Pandruvada)
- Drop unnecessary explicit driver data clearing on removal from the
intel_pch_thermal driver (Kaushlendra Kumar)
- Add support for "slow" workload type hints to the int340x
processor_thermal driver and enable it on the Panther Lake platform
(Srinivas Pandruvada)
- Use sysfs_emit{_at}() in sysfs show functions in Intel thermal
drivers (Thorsten Blum)
- Update the x86_pkg_temp_thermal driver to handle
THERMAL_TEMP_INVALID that can be passed to it via sysfs as expected
(Rafael Wysocki)
- Drop a redundant local variable from the intel_tcc_cooling thermal
driver and fix a kerneldoc comment typo in the TCC library (Sumeet
Pawnikar)
- Fix CFLAGS and LDFLAGS in the pkg-config libthermal template
(Romain Gantois)
- Support multiple temp to raw conversion functions in the Mediatek
LVTS thermal driver and add MT8196 and MT6991 support to it (Laura
Nao)
- Add Mediatek LVTS driver support for MT7987 (Frank Wunderlich)
- Use the existing HZ_PER_MHZ macro on STM32 (Andy Shevchenko)
- Use the existing clamp() macro on BCM2835 (Thorsten Blum)
- Make the reset line optional in order to support new Renesas SoCs
where it is not available and add support for RZ/T2H and RZ/N2H to
the rzg3e thermal driver (Cosmin Tanislav)
- Document RZ/V2N TSU in the r9a09g047-tsu DT bindings (Ovidiu
Panait)
- Fix all kernel-doc warnings in the internal thermal core header
file (Randy Dunlap)
- Fix a device node reference leak in thermal_of_cm_lookup() (Felix
Gu)
- Replace some old-style library function calls with ones that are
currently recommended in several places in the thermal core and
debugfs code (Sumeet Pawnikar, Thorsten Blum)
* tag 'thermal-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits)
drivers: thermal: intel: tcc_cooling: Drop redundant local variable
thermal/of: Fix reference leak in thermal_of_cm_lookup()
thermal: core: thermal_core.h: fix all kernel-doc warnings
thermal: intel: x86_pkg_temp_thermal: Handle invalid temperature
thermal: renesas: rzg3e: add support for RZ/T2H and RZ/N2H
dt-bindings: thermal: r9a09g047-tsu: document RZ/T2H and RZ/N2H
thermal: renesas: rzg3e: make calibration value retrieval per-chip
thermal: renesas: rzg3e: make min and max temperature per-chip
thermal: renesas: rzg3e: make reset optional
dt-bindings: thermal: r9a09g047-tsu: Document RZ/V2N TSU
thermal/drivers/broadcom: Use clamp to simplify bcm2835_thermal_temp2adc
thermal/drivers/stm32: Use predefined HZ_PER_MHZ instead of a custom one
thermal/drivers/mediatek/lvts_thermal: Add mt7987 support
dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT7987
dt-bindings: nvmem: mediatek: efuse: Add support for MT8196
thermal/drivers/mediatek/lvts_thermal: Add MT8196 support
thermal/drivers/mediatek/lvts: Support MSR offset for 16-bit calibration data
thermal/drivers/mediatek/lvts: Add support for ATP mode
thermal/drivers/mediatek/lvts: Add lvts_temp_to_raw variant
thermal/drivers/mediatek/lvts: Add platform ops to support alternative conversion logic
...
Yang Xiuwei [Tue, 10 Feb 2026 02:34:32 +0000 (10:34 +0800)]
io_uring/tctx: avoid modifying loop variable in io_ring_add_registered_file
Use a separate 'idx' variable to store the result of array_index_nospec()
instead of modifying the loop variable 'offset' directly. This improves
code clarity by separating the logical index from the sanitized index
used for array access.
No functional change intended.
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring_sanitise_params() already rejects flags that include both
IORING_SETUP_SQPOLL and IORING_SETUP_DEFER_TASKRUN. So it's unnecessary
to check IORING_SETUP_SQPOLL in io_uring_create() when
IORING_SETUP_DEFER_TASKRUN has already been checked. Drop the
!(ctx->flags & IORING_SETUP_SQPOLL) check for the task_complete case.
Dominik Haller [Fri, 30 Jan 2026 20:58:15 +0000 (12:58 -0800)]
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
Drop the gpio reset from the list of required properties. The bridge works
fine with a reset not managed by Linux. In the driver itself the gpio is
already flagged as optional.
Linus Torvalds [Tue, 10 Feb 2026 03:00:42 +0000 (19:00 -0800)]
Merge tag 'pm-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"By the number of commits, cpufreq is the leading party (again) and the
most visible change there is the removal of the omap-cpufreq driver
that has not been used for a long time (good riddance). There are also
quite a few changes in the cppc_cpufreq driver, mostly related to
fixing its frequency invariance engine in the case when the CPPC
registers used by it are not in PCC. In addition to that, support for
AM62L3 is added to the ti-cpufreq driver and the cpufreq-dt-platdev
list is updated for some platforms. The remaining cpufreq changes are
assorted fixes and cleanups.
Next up is cpuidle and the changes there are dominated by intel_idle
driver updates, mostly related to the new command line facility
allowing users to adjust the list of C-states used by the driver.
There are also a few updates of cpuidle governors, including two menu
governor fixes and some refinements of the teo governor, and a
MAINTAINERS update adding Christian Loehle as a cpuidle reviewer.
[Thanks for stepping up Christian!]
The most significant update related to system suspend and hibernation
is the one to stop freezing the PM runtime workqueue during system PM
transitions which allows some deadlocks to be avoided. There is also a
fix for possible concurrent bit field updates in the core device
suspend code and a few other minor fixes.
Apart from the above, several drivers are updated to discard the
return value of pm_runtime_put() which is going to be converted to a
void function as soon as everybody stops using its return value, PL4
support for Ice Lake is added to the Intel RAPL power capping driver,
and there are assorted cleanups, documentation fixes, and some
cpupower utility improvements.
Specifics:
- Remove the unused omap-cpufreq driver (Andreas Kemnade)
- Optimize error handling code in cpufreq_boost_trigger_state() and
make cpufreq_boost_trigger_state() return -EOPNOTSUPP if no policy
supports boost (Lifeng Zheng)
- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
Dhruva Gole, and Konrad Dybcio)
- Minor improvements to the cpufreq and cpumask rust implementation
(Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen)
- Add support for AM62L3 SoC to the ti-cpufreq driver (Dhruva Gole)
- Update arch_freq_scale in the CPPC cpufreq driver's frequency
invariance engine (FIE) in scheduler ticks if the related CPPC
registers are not in PCC (Jie Zhan)
- Assorted minor cleanups and improvements in ARM cpufreq drivers
(Juan Martinez, Felix Gu, Luca Weiss, and Sergey Shtylyov)
- Add generic helpers for sysfs show/store to cppc_cpufreq (Sumit
Gupta)
- Make the scaling_setspeed cpufreq sysfs attribute return the actual
requested frequency to avoid confusion (Pengjie Zhang)
- Simplify the idle CPU time granularity test in the ondemand cpufreq
governor (Frederic Weisbecker)
- Enable asym capacity in intel_pstate only when CPU SMT is not
possible (Yaxiong Tian)
- Update the description of rate_limit_us default value in cpufreq
documentation (Yaxiong Tian)
- Add a command line option to adjust the C-states table in the
intel_idle driver, remove the 'preferred_cstates' module parameter
from it, add C-states validation to it and clean it up (Artem
Bityutskiy)
- Make the menu cpuidle governor always check the time till the
closest timer event when the scheduler tick has been stopped to
prevent it from mistakenly selecting the deepest available idle
state (Rafael Wysocki)
- Update the teo cpuidle governor to avoid making suboptimal
decisions in certain corner cases and generally improve idle state
selection accuracy (Rafael Wysocki)
- Remove an unlikely() annotation on the early-return condition in
menu_select() that leads to branch misprediction 100% of the time
on systems with only 1 idle state enabled, like ARM64 servers
(Breno Leitao)
- Add Christian Loehle to MAINTAINERS as a cpuidle reviewer
(Christian Loehle)
- Stop flagging the PM runtime workqueue as freezable to avoid system
suspend and resume deadlocks in subsystems that assume asynchronous
runtime PM to work during system-wide PM transitions (Rafael
Wysocki)
- Drop redundant NULL pointer checks before acomp_request_free() from
the hibernation code handling image saving (Rafael Wysocki)
- Update wakeup_sources_walk_start() to handle empty lists of wakeup
sources as appropriate (Samuel Wu)
- Make dev_pm_clear_wake_irq() check the power.wakeirq value under
power.lock to avoid race conditions (Gui-Dong Han)
- Avoid bit field races related to power.work_in_progress in the core
device suspend code (Xuewen Yan)
- Make several drivers discard pm_runtime_put() return value in
preparation for converting that function to a void one (Rafael
Wysocki)
- Add PL4 support for Ice Lake to the Intel RAPL power capping driver
(Daniel Tang)
- Replace sprintf() with sysfs_emit() in power capping sysfs show
functions (Sumeet Pawnikar)
- Make dev_pm_opp_get_level() return value match the documentation
after a previous update of the latter (Aleks Todorov)
- Use scoped for each OF child loop in the OPP code (Krzysztof
Kozlowski)
- Fix a bug in an example code snippet and correct typos in the
energy model management documentation (Patrick Little)
- Fix miscellaneous problems in cpupower (Kaushlendra Kumar):
* idle_monitor: Fix incorrect value logged after stop
* Fix inverted APERF capability check
* Use strcspn() to strip trailing newline
* Reset errno before strtoull()
* Show C0 in idle-info dump
- Improve cpupower installation procedure by making the systemd step
optional and allowing users to disable the installation of
systemd's unit file (João Marcos Costa)"
* tag 'pm-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
PM: sleep: core: Avoid bit field races related to work_in_progress
PM: sleep: wakeirq: harden dev_pm_clear_wake_irq() against races
cpufreq: Documentation: Update description of rate_limit_us default value
cpufreq: intel_pstate: Enable asym capacity only when CPU SMT is not possible
PM: wakeup: Handle empty list in wakeup_sources_walk_start()
PM: EM: Documentation: Fix bug in example code snippet
Documentation: Fix typos in energy model documentation
cpuidle: governors: teo: Refine intercepts-based idle state lookup
cpuidle: governors: teo: Adjust the classification of wakeup events
cpufreq: ondemand: Simplify idle cputime granularity test
cpufreq: userspace: make scaling_setspeed return the actual requested frequency
PM: hibernate: Drop NULL pointer checks before acomp_request_free()
cpufreq: CPPC: Add generic helpers for sysfs show/store
cpufreq: scmi: Fix device_node reference leak in scmi_cpu_domain_id()
cpufreq: ti-cpufreq: add support for AM62L3 SoC
cpufreq: dt-platdev: Add ti,am62l3 to blocklist
cpufreq/amd-pstate: Add comment explaining nominal_perf usage for performance policy
cpufreq: scmi: correct SCMI explanation
cpufreq: dt-platdev: Block the driver from probing on more QC platforms
rust: cpumask: rename methods of Cpumask for clarity and consistency
...
Linus Torvalds [Tue, 10 Feb 2026 02:42:47 +0000 (18:42 -0800)]
Merge tag 'acpi-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"This one is significantly larger than previous ACPI support pull
requests because several significant updates have coincided in it.
First, there is a routine ACPICA code update, to upstream version 20251212, but this time it covers new ACPI 6.6 material that has not
been covered yet. Among other things, it includes definitions of a few
new ACPI tables and updates of some others, like the GICv5 MADT
structures and ARM IORT IWB node definitions that are used for adding
GICv5 ACPI probing on ARM (that technically is IRQ subsystem material,
but it depends on the ACPICA changes, so it is included here). The
latter alone adds a few hundred lines of new code.
Second, there is an update of ACPI _OSC handling including a fix that
prevents failures from occurring in some corner cases due to careless
handling of _OSC error bits.
On top of that, the "system resource" ACPI device objects with the
PNP0C01 and PNP0C02 are now going to be handled by the ACPI core
device enumeration code instead of handing them over to the legacy PNP
system driver which causes device enumeration issues to occur. Some of
those issues have been worked around in device drivers and elsewhere
and those workarounds should not be necessary any more, so they are
going away.
Moreover, the time has come to convert all "core ACPI" device drivers
that were still using struct acpi_driver objects for device binding
into proper platform drivers that use struct platform_driver for this
purpose. These updates are accompanied by some requisite core ACPI
device enumeration code changes.
Next, there are ACPI APEI updates, including changes to avoid excess
overhead in the NMI handler and in SEA on the ARM side, changes to
unify ACPI-based HW error tracing and logging, and changes to prevent
APEI code from reaching out of its allocated memory.
There are also some ACPI power management updates, mostly related to
the ACPI cpuidle support in the processor driver, suspend-to-idle
handling on systems with ACPI support and to ACPI PM of devices.
In addition to the above, bugs are fixed and the code is cleaned up in
assorted places all over.
Specifics:
- Update the ACPICA code in the kernel to upstream version 20251212
which includes the following changes:
* Add support for new ACPI table DTPR (Michal Camacho Romero)
* Release objects with acpi_ut_delete_object_desc() (Zilin Guan)
* Add UUIDs for Microsoft fan extensions and UUIDs associated with
TPM 2.0 devices (Armin Wolf)
* Fix NULL pointer dereference in acpi_ev_address_space_dispatch()
(Alexey Simakov)
* Add KEYP ACPI table definition (Dave Jiang)
* Add support for the Microsoft display mux _OSI string (Armin
Wolf)
* Add definitions for the IOVT ACPI table (Xianglai Li)
* Abort AML bytecode execution on AML_FATAL_OP (Armin Wolf)
* Include all fields in subtable type1 for PPTT (Ben Horgan)
* Add GICv5 MADT structures and Arm IORT IWB node definitions
(Jose Marinho)
* Update Parameter Block structure for RAS2 and add a new flag in
Memory Affinity Structure for SRAT (Pawel Chmielewski)
* Add _VDM (Voltage Domain) object (Pawel Chmielewski)
- Add support for GICv5 ACPI probing on ARM which is based on the
GICv5 MADT structures and ARM IORT IWB node definitions recently
added to ACPICA (Lorenzo Pieralisi)
- Rework ACPI PM notification setup for PCI root buses and modify the
ACPI PM setup for devices to register wakeup source objects under
physical (that is, PCI, platform, etc.) devices instead of doing
that under their ACPI companions (Rafael Wysocki)
- Adjust debug messages regarding postponed ACPI PM printed during
system resume to be more accurate (Rafael Wysocki)
- Remove dead code from lps0_device_attach() (Gergo Koteles)
- Start to invoke Microsoft Function 9 (Turn On Display) of the Low-
Power S0 Idle (LPS0) _DSM in the suspend-to-idle resume flow on
systems with ACPI LPS0 support to address a functional issue on
Lenovo Yoga Slim 7i Aura (15ILL9), where system fans and keyboard
backlights fail to resume after suspend (Jakob Riemenschneider)
- Add sysfs attribute cid for exposing _CID lists under ACPI device
objects (Rafael Wysocki)
- Replace sprintf() with sysfs_emit() in all of the core ACPI sysfs
interface code (Sumeet Pawnikar)
- Use acpi_get_local_u64_address() in the code implementing ACPI
support for PCI to evaluate _ADR instead of evaluating that object
directly (Andy Shevchenko)
- Add JWIPC JVC9100 to irq1_level_low_skip_override[] to unbreak
serial IRQs on that system (Ai Chao)
- Fix handling of _OSC errors in acpi_run_osc() to avoid failures on
systems where _OSC error bits are set even though the _OSC return
buffer contains acknowledged feature bits (Rafael Wysocki)
- Clean up and rearrange \_SB._OSC handling for general platform
features and USB4 features to avoid code duplication and
unnecessary memory management overhead (Rafael Wysocki)
- Make the ACPI core device enumeration code handle PNP0C01 and
PNP0C02 ("system resource") device objects directly instead of
letting the legacy PNP system driver handle them to avoid device
enumeration issues on systems where PNP0C02 is present in the _CID
list under ACPI device objects with a _HID matching a proper device
driver in Linux (Rafael Wysocki)
- Drop workarounds for the known device enumeration issues related to
_CID lists containing PNP0C02 (Rafael Wysocki)
- Drop outdated comment regarding removed function in the ACPI-based
device enumeration code (Julia Lawall)
- Make PRP0001 device matching work as expected for ACPI device
objects using it as a _HID for board development and similar
purposes (Kartik Rajput)
- Use async schedule function in acpi_scan_clear_dep_fn() to avoid
races with user space initialization on some systems (Yicong Yang)
- Add a piece of documentation explaining why binding drivers
directly to ACPI device objects is not a good idea in general and
why it is desirable to convert drivers doing so into proper
platform drivers that use struct platform_driver for device binding
(Rafael Wysocki)
- Convert multiple "core ACPI" drivers, including the NFIT ACPI
device driver, the generic ACPI button drivers, the generic ACPI
thermal zone driver, the ACPI hardware event device (HED) driver,
the ACPI EC driver, the ACPI SMBUS HC driver, the ACPI Smart
Battery Subsystem (SBS) driver, and the ACPI backlight (video)
driver to proper platform drivers that use struct platform_driver
for device binding (Rafael Wysocki)
- Use acpi_get_local_u64_address() in the ACPI backlight (video)
driver to evaluate _ADR instead of evaluating that object directly
(Andy Shevchenko)
- Convert the generic ACPI battery driver to a proper platform driver
using struct platform_driver for device binding (Rafael Wysocki)
- Fix incorrect charging status when current is zero in the generic
ACPI battery driver (Ata İlhan Köktürk)
- Use LIST_HEAD() for initializing a stack-allocated list in the
generic ACPI watchdog device driver (Can Peng)
- Rework the ACPI idle driver initialization to register it directly
from the common initialization code instead of doing that from a
CPU hotplug "online" callback and clean it up (Huisong Li, Rafael
Wysocki)
- Fix a possible NULL pointer dereference in
acpi_processor_errata_piix4() (Tuo Li)
- Make read-only array non_mmio_desc[] static const (Colin Ian King)
- Prevent the APEI GHES support code on ARM from accessing memory out
of bounds or going past the ARM processor CPER record buffer (Mauro
Carvalho Chehab)
- Prevent cper_print_fw_err() from dumping the entire memory on
systems with defective firmware (Mauro Carvalho Chehab)
- Improve ghes_notify_nmi() status check to avoid unnecessary
overhead in the NMI handler by carrying out all of the requisite
preparations and the NMI registration time (Tony Luck)
- Refactor the GHES driver by extracting common functionality into
reusable helper functions to reduce code duplication and improve
the ghes_notify_sea() status check in analogy with the previous
ghes_notify_nmi() status check improvement (Shuai Xue)
- Make ELOG and GHES log and trace consistently and support the CPER
CXL protocol analogously (Fabio De Francesco)
- Disable KASAN instrumentation in the APEI GHES driver when compile
testing with clang < 18 (Nathan Chancellor)
- Let ghes_edac be the preferred driver to load on __ZX__ and _BYO_
systems by extending the platform detection list in the APEI GHES
driver (Tony W Wang-oc)
- Clean up cppc_perf_caps and cppc_perf_ctrls structs and rename EPP
constants for clarity in the ACPI CPPC library (Sumit Gupta)"
* tag 'acpi-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (117 commits)
ACPI: battery: fix incorrect charging status when current is zero
ACPI: scan: Use async schedule function in acpi_scan_clear_dep_fn()
ACPI: x86: s2idle: Invoke Microsoft _DSM Function 9 (Turn On Display)
ACPI: APEI: GHES: Add ghes_edac support for __ZX__ and _BYO_ systems
ACPI: APEI: GHES: Disable KASAN instrumentation when compile testing with clang < 18
ACPI: sysfs: Replace sprintf() with sysfs_emit()
ACPI: CPPC: Rename EPP constants for clarity
ACPI: CPPC: Clean up cppc_perf_caps and cppc_perf_ctrls structs
ACPI: processor: idle: Rework the handling of acpi_processor_ffh_lpi_probe()
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_dev() to void
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_states() to void
irqchip/gic-v5: Add ACPI IWB probing
irqchip/gic-v5: Add ACPI ITS probing
irqchip/gic-v5: Add ACPI IRS probing
irqchip/gic-v5: Split IRS probing into OF and generic portions
PCI/MSI: Make the pci_msi_map_rid_ctlr_node() interface firmware agnostic
irqdomain: Add parent field to struct irqchip_fwid
ACPI: PCI: simplify code with acpi_get_local_u64_address()
ACPI: video: simplify code with acpi_get_local_u64_address()
ACPI: PM: Adjust messages regarding postponed ACPI PM
...
Linus Torvalds [Tue, 10 Feb 2026 02:14:52 +0000 (18:14 -0800)]
Merge tag 'for-7.0/block-stable-pages-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull bounce buffer dio for stable pages from Jens Axboe:
"This adds support for bounce buffering of dio for stable pages. This
was all done by Christoph. In his words:
This series tries to address the problem that under I/O pages can be
modified during direct I/O, even when the device or file system
require stable pages during I/O to calculate checksums, parity or data
operations. It does so by adding block layer helpers to bounce buffer
an iov_iter into a bio, then wires that up in iomap and ultimately
XFS.
The reason that the file system even needs to know about it, is
because reads need a user context to copy the data back, and the
infrastructure to defer ioends to a workqueue currently sits in XFS.
I'm going to look into moving that into ioend and enabling it for
other file systems. Additionally btrfs already has it's own
infrastructure for this, and actually an urgent need to bounce buffer,
so this should be useful there and could be wire up easily. In fact
the idea comes from patches by Qu that did this in btrfs.
This patch fixes all but one xfstests failures on T10 PI capable
devices (generic/095 seems to have issues with a mix of mmap and
splice still, I'm looking into that separately), and make qemu VMs
running Windows, or Linux with swap enabled fine on an XFS file on a
device using PI.
Performance numbers on my (not exactly state of the art) NVMe PI test
setup:
Sequential reads using io_uring, QD=16.
Bandwidth and CPU usage (usr/sys):
Note that the 64k read numbers look really odd to me for the baseline
zero copy case, but are reproducible over many repeated runs.
The bounce read numbers should further improve when moving the PI
validation to the file system and removing the double context switch,
which I have patches for that will sent out soon"
* tag 'for-7.0/block-stable-pages-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
xfs: use bounce buffering direct I/O when the device requires stable pages
iomap: add a flag to bounce buffer direct I/O
iomap: support ioends for direct reads
iomap: rename IOMAP_DIO_DIRTY to IOMAP_DIO_USER_BACKED
iomap: free the bio before completing the dio
iomap: share code between iomap_dio_bio_end_io and iomap_finish_ioend_direct
iomap: split out the per-bio logic from iomap_dio_bio_iter
iomap: simplify iomap_dio_bio_iter
iomap: fix submission side handling of completion side errors
block: add helpers to bounce buffer an iov_iter into bios
block: remove bio_release_page
iov_iter: extract a iov_iter_extract_bvecs helper from bio code
block: open code bio_add_page and fix handling of mismatching P2P ranges
block: refactor get_contig_folio_len
block: add a BIO_MAX_SIZE constant and use it
Linus Torvalds [Tue, 10 Feb 2026 01:57:21 +0000 (17:57 -0800)]
Merge tag 'for-7.0/block-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Support for batch request processing for ublk, improving the
efficiency of the kernel/ublk server communication. This can yield
nice 7-12% performance improvements
- Support for integrity data for ublk
- Various other ublk improvements and additions, including a ton of
selftests additions and updated
- Move the handling of blk-crypto software fallback from below the
block layer to above it. This reduces the complexity of dealing with
bio splitting
- Series fixing a number of potential deadlocks in blk-mq related to
the queue usage counter and writeback throttling and rq-qos debugfs
handling
- Add an async_depth queue attribute, to resolve a performance
regression that's been around for a qhilw related to the scheduler
depth handling
- Only use task_work for IOPOLL completions on NVMe, if it is necessary
to do so. An earlier fix for an issue resulted in all these
completions being punted to task_work, to guarantee that completions
were only run for a given io_uring ring when it was local to that
ring. With the new changes, we can detect if it's necessary to use
task_work or not, and avoid it if possible.
- rnbd fixes:
- Fix refcount underflow in device unmap path
- Handle PREFLUSH and NOUNMAP flags properly in protocol
- Fix server-side bi_size for special IOs
- Zero response buffer before use
- Fix trace format for flags
- Add .release to rnbd_dev_ktype
- MD pull requests via Yu Kuai
- Fix raid5_run() to return error when log_init() fails
- Fix IO hang with degraded array with llbitmap
- Fix percpu_ref not resurrected on suspend timeout in llbitmap
- Fix GPF in write_page caused by resize race
- Fix NULL pointer dereference in process_metadata_update
- Fix hang when stopping arrays with metadata through dm-raid
- Fix any_working flag handling in raid10_sync_request
- Refactor sync/recovery code path, improve error handling for
badblocks, and remove unused recovery_disabled field
- Consolidate mddev boolean fields into mddev_flags
- Use mempool to allocate stripe_request_ctx and make sure
max_sectors is not less than io_opt in raid5
- Fix return value of mddev_trylock
- Fix memory leak in raid1_run()
- Add Li Nan as mdraid reviewer
- Move phys_vec definitions to the kernel types, mostly in preparation
for some VFIO and RDMA changes
- Improve the speed for secure erase for some devices
- Various little rust updates
- Various other minor fixes, improvements, and cleanups
* tag 'for-7.0/block-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
blk-mq: ABI/sysfs-block: fix docs build warnings
selftests: ublk: organize test directories by test ID
block: decouple secure erase size limit from discard size limit
block: remove redundant kill_bdev() call in set_blocksize()
blk-mq: add documentation for new queue attribute async_dpeth
block, bfq: convert to use request_queue->async_depth
mq-deadline: covert to use request_queue->async_depth
kyber: covert to use request_queue->async_depth
blk-mq: add a new queue sysfs attribute async_depth
blk-mq: factor out a helper blk_mq_limit_depth()
blk-mq-sched: unify elevators checking for async requests
block: convert nr_requests to unsigned int
block: don't use strcpy to copy blockdev name
blk-mq-debugfs: warn about possible deadlock
blk-mq-debugfs: add missing debugfs_mutex in blk_mq_debugfs_register_hctxs()
blk-mq-debugfs: remove blk_mq_debugfs_unregister_rqos()
blk-mq-debugfs: make blk_mq_debugfs_register_rqos() static
blk-rq-qos: fix possible debugfs_mutex deadlock
blk-mq-debugfs: factor out a helper to register debugfs for all rq_qos
blk-wbt: fix possible deadlock to nest pcpu_alloc_mutex under q_usage_counter
...
Linus Torvalds [Tue, 10 Feb 2026 01:31:17 +0000 (17:31 -0800)]
Merge tag 'io_uring-bpf-restrictions.4-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring bpf filters from Jens Axboe:
"This adds support for both cBPF filters for io_uring, as well as task
inherited restrictions and filters.
seccomp and io_uring don't play along nicely, as most of the
interesting data to filter on resides somewhat out-of-band, in the
submission queue ring.
As a result, things like containers and systemd that apply seccomp
filters, can't filter io_uring operations.
That leaves them with just one choice if filtering is critical -
filter the actual io_uring_setup(2) system call to simply disallow
io_uring. That's rather unfortunate, and has limited us because of it.
io_uring already has some filtering support. It requires the ring to
be setup in a disabled state, and then a filter set can be applied.
This filter set is completely bi-modal - an opcode is either enabled
or it's not. Once a filter set is registered, the ring can be enabled.
This is very restrictive, and it's not useful at all to systemd or
containers which really want both broader and more specific control.
This first adds support for cBPF filters for opcodes, which enables
tighter control over what exactly a specific opcode may do. As
examples, specific support is added for IORING_OP_OPENAT/OPENAT2,
allowing filtering on resolve flags. And another example is added for
IORING_OP_SOCKET, allowing filtering on domain/type/protocol. These
are both common use cases. cBPF was chosen rather than eBPF, because
the latter is often restricted in containers as well.
These filters are run post the init phase of the request, which allows
filters to even dip into data that is being passed in struct in user
memory, as the init side of requests make that data stable by bringing
it into the kernel. This allows filtering without needing to copy this
data twice, or have filters etc know about the exact layout of the
user data. The filters get the already copied and sanitized data
passed.
On top of that support is added for per-task filters, meaning that any
ring created with a task that has a per-task filter will get those
filters applied when it's created. These filters are inherited across
fork as well. Once a filter has been registered, any further added
filters may only further restrict what operations are permitted.
Filters cannot change the return value of an operation, they can only
permit or deny it based on the contents"
* tag 'io_uring-bpf-restrictions.4-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: allow registration of per-task restrictions
io_uring: add task fork hook
io_uring/bpf_filter: add ref counts to struct io_bpf_filter
io_uring/bpf_filter: cache lookup table in ctx->bpf_filters
io_uring/bpf_filter: allow filtering on contents of struct open_how
io_uring/net: allow filtering on IORING_OP_SOCKET data
io_uring: add support for BPF filtering for opcode restrictions
Linus Torvalds [Tue, 10 Feb 2026 01:22:00 +0000 (17:22 -0800)]
Merge tag 'for-7.0/io_uring-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Clean up the IORING_SETUP_R_DISABLED and submitter task checking,
mostly just in preparation for relaxing the locking for SINGLE_ISSUER
in the future.
- Improve IOPOLL by using a doubly linked list to manage completions.
Previously it was singly listed, which meant that to complete request
N in the chain 0..N-1 had to have completed first. With a doubly
linked list we can complete whatever request completes in that order,
rather than need to wait for a consecutive range to be available.
This reduces latencies.
- Improve the restriction setup and checking. Mostly in preparation for
adding further features on top of that. Coming in a separate pull
request.
- Split out task_work and wait handling into separate files. These are
mostly nicely abstracted already, but still remained in the
io_uring.c file which is on the larger side.
- Use GFP_KERNEL_ACCOUNT in a few more spots, where appropriate.
- Ensure even the idle io-wq worker exits if a task no longer has any
rings open.
- Add support for a non-circular submission queue.
By default, the SQ ring keeps moving around, even if only a few
entries are used for each submission. This can be wasteful in terms
of cachelines.
If IORING_SETUP_SQ_REWIND is set for the ring when created, each
submission will start at offset 0 instead of where we last left off
doing submissions.
- Various little cleanups
* tag 'for-7.0/io_uring-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (30 commits)
io_uring/kbuf: fix memory leak if io_buffer_add_list fails
io_uring: Add SPDX id lines to remaining source files
io_uring: allow io-wq workers to exit when unused
io_uring/io-wq: add exit-on-idle state
io_uring/net: don't continue send bundle if poll was required for retry
io_uring/rsrc: use GFP_KERNEL_ACCOUNT consistently
io_uring/futex: use GFP_KERNEL_ACCOUNT for futex data allocation
io_uring/io-wq: handle !sysctl_hung_task_timeout_secs
io_uring: fix bad indentation for setup flags if statement
io_uring/rsrc: take unsigned index in io_rsrc_node_lookup()
io_uring: introduce non-circular SQ
io_uring: split out CQ waiting code into wait.c
io_uring: split out task work code into tw.c
io_uring/io-wq: don't trigger hung task for syzbot craziness
io_uring: add IO_URING_EXIT_WAIT_MAX definition
io_uring/sync: validate passed in offset
io_uring/eventfd: remove unused ctx->evfd_last_cq_tail member
io_uring/timeout: annotate data race in io_flush_timeouts()
io_uring/uring_cmd: explicitly disallow cancelations for IOPOLL
io_uring: fix IOPOLL with passthrough I/O
...
Linus Torvalds [Tue, 10 Feb 2026 00:58:28 +0000 (16:58 -0800)]
Merge tag 'pull-filename' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs 'struct filename' updates from Al Viro:
"[Mostly] sanitize struct filename handling"
* tag 'pull-filename' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (68 commits)
sysfs(2): fs_index() argument is _not_ a pathname
alpha: switch osf_mount() to strndup_user()
ksmbd: use CLASS(filename_kernel)
mqueue: switch to CLASS(filename)
user_statfs(): switch to CLASS(filename)
statx: switch to CLASS(filename_maybe_null)
quotactl_block(): switch to CLASS(filename)
chroot(2): switch to CLASS(filename)
move_mount(2): switch to CLASS(filename_maybe_null)
namei.c: switch user pathname imports to CLASS(filename{,_flags})
namei.c: convert getname_kernel() callers to CLASS(filename_kernel)
do_f{chmod,chown,access}at(): use CLASS(filename_uflags)
do_readlinkat(): switch to CLASS(filename_flags)
do_sys_truncate(): switch to CLASS(filename)
do_utimes_path(): switch to CLASS(filename_uflags)
chdir(2): unspaghettify a bit...
do_fchownat(): unspaghettify a bit...
fspick(2): use CLASS(filename_flags)
name_to_handle_at(): use CLASS(filename_uflags)
vfs_open_tree(): use CLASS(filename_uflags)
...
Steven Rostedt [Tue, 10 Feb 2026 00:46:31 +0000 (19:46 -0500)]
tracing: Move d_max_latency out of CONFIG_FSNOTIFY protection
The tracing_max_latency shouldn't be limited if CONFIG_FSNOTIFY is defined
or not and it was moved out of that protection to be always available with
CONFIG_TRACER_MAX_TRACE. All was moved out except the dentry descriptor
for it (d_max_latency) and it failed to build on some configs.
Move that out of the CONFIG_FSNOTIFY protection too.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://patch.msgid.link/20260209194631.788bfc85@fedora Fixes: ba73713da50e ("tracing: Clean up use of trace_create_maxlat_file()") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202602092133.fTdojd95-lkp@intel.com/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Linus Torvalds [Tue, 10 Feb 2026 00:40:43 +0000 (16:40 -0800)]
Merge tag 'dlm-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This includes several minor code cleanups, and one notable fix for
recovery of in-progress lock conversions which would lead to a the
convert operation never completing"
* tag 'dlm-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: Avoid -Wflex-array-member-not-at-end warning
fs/dlm/dir: remove unuse variable count_match
dlm: Constify struct configfs_item_operations and configfs_group_operations
fs/dlm: use list_add_tail() instead of open-coding list insertion
dlm: validate length in dlm_search_rsb_tree
dlm: fix recovery pending middle conversion
Linus Torvalds [Tue, 10 Feb 2026 00:11:27 +0000 (16:11 -0800)]
Merge tag 'xfs-merge-7.0' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Carlos Maiolino:
"This contains several improvements to zoned device support,
performance improvements for the parent pointers, and a new health
monitoring feature. There are some improvements in the journaling code
too but no behavior change expected.
Last but not least, some code refactoring and bug fixes are also
included in this series"
* tag 'xfs-merge-7.0' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (67 commits)
xfs: add sysfs stats for zoned GC
xfs: give the defer_relog stat a xs_ prefix
xfs: add zone reset error injection
xfs: refactor zone reset handling
xfs: don't mark all discard issued by zoned GC as sync
xfs: allow setting errortags at mount time
xfs: use WRITE_ONCE/READ_ONCE for m_errortag
xfs: move the guts of XFS_ERRORTAG_DELAY out of line
xfs: don't validate error tags in the I/O path
xfs: allocate m_errortag early
xfs: fix the errno sign for the xfs_errortag_{add,clearall} stubs
xfs: validate log record version against superblock log version
xfs: fix spacing style issues in xfs_alloc.c
xfs: remove xfs_zone_gc_space_available
xfs: use a seprate member to track space availabe in the GC scatch buffer
xfs: check for deleted cursors when revalidating two btrees
xfs: fix UAF in xchk_btree_check_block_owner
xfs: check return value of xchk_scrub_create_subord
xfs: only call xf{array,blob}_destroy if we have a valid pointer
xfs: get rid of the xchk_xfile_*_descr calls
...
Linus Torvalds [Tue, 10 Feb 2026 00:08:40 +0000 (16:08 -0800)]
Merge tag 'erofs-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, inode page cache sharing among filesystems on the same
machine is now supported, which is particularly useful for
high-density hosts running tens of thousands of containers.
In addition, we fully isolate the EROFS core on-disk format from other
optional encoded layouts since the core on-disk part is designed to be
simple, effective, and secure. Users can use the core format to build
unique golden immutable images and import their filesystem trees
directly from raw block devices via DMA, page-mapped DAX devices,
and/or file-backed mounts without having to worry about unnecessary
intrinsic consistency issues found in other generic filesystems by
design. However, the full vision is still working in progress and will
spend more time to achieve final goals.
There are other improvements and bug fixes as usual, as listed below:
- Support inode page cache sharing among filesystems
- Formally separate optional encoded (aka compressed) inode layouts
(and the implementations) from the EROFS core on-disk aligned plain
format for future zero-trust security usage
- Improve performance by caching the fact that an inode does not have
a POSIX ACL
- Improve LZ4 decompression error reporting
- Enable LZMA by default and promote DEFLATE and Zstandard algorithms
out of EXPERIMENTAL status
- Switch to inode_set_cached_link() to cache symlink lengths
- random bugfixes and minor cleanups"
* tag 'erofs-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: (31 commits)
erofs: fix UAF issue for file-backed mounts w/ directio option
erofs: update compression algorithm status
erofs: fix inline data read failure for ztailpacking pclusters
erofs: avoid some unnecessary #ifdefs
erofs: handle end of filesystem properly for file-backed mounts
erofs: separate plain and compressed filesystems formally
erofs: use inode_set_cached_link()
erofs: mark inodes without acls in erofs_read_inode()
erofs: implement .fadvise for page cache share
erofs: support compressed inodes for page cache share
erofs: support unencoded inodes for page cache share
erofs: pass inode to trace_erofs_read_folio
erofs: introduce the page cache share feature
erofs: using domain_id in the safer way
erofs: add erofs_inode_set_aops helper to set the aops
erofs: support user-defined fingerprint name
erofs: decouple `struct erofs_anon_fs_type`
fs: Export alloc_empty_backing_file
erofs: tidy up erofs_init_inode_xattrs()
erofs: add missing documentation about `directio` mount option
...
Linus Torvalds [Tue, 10 Feb 2026 00:00:21 +0000 (16:00 -0800)]
Merge tag 'hfs-v7.0-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/hfs
Pull hfs/hfsplus updates from Viacheslav Dubeyko:
"This pull request contains several fixes of syzbot reported issues and
HFS+ fixes of xfstests failures.
- fix an issue reported by syzbot triggering BUG_ON() in the case of
corrupted superblock, replacing the BUG_ON()s with proper error
handling (Jori Koolstra)
- fix memory leaks in the mount logic of HFS/HFS+ file systems. When
HFS/HFS+ were converted to the new mount api a bug was introduced
by changing the allocation pattern of sb->s_fs_info (Mehdi Ben Hadj
Khelifa)
- fix hfs_bnode_create() by returning ERR_PTR(-EEXIST) instead of
the node pointer when it's already hashed. This avoids a double
unload_nls() on mount failure (suggested by Shardul Bankar)
- set inode's mode as regular file for system inodes (Tetsuo Handa)
The rest fix failures in generic/020, generic/037, generic/062,
generic/480, and generic/498 xfstests for the case of HFS+ file
system. Currently, only 30 xfstests' test-cases experience failures
for HFS+ file system (initially, it was around 100 failed xfstests)"
* tag 'hfs-v7.0-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/hfs:
hfsplus: avoid double unload_nls() on mount failure
hfsplus: fix warning issue in inode.c
hfsplus: fix generic/062 xfstests failure
hfsplus: fix generic/037 xfstests failure
hfsplus: pretend special inodes as regular files
hfsplus: return error when node already exists in hfs_bnode_create
hfs: Replace BUG_ON with error handling for CNID count checks
hfsplus: fix generic/020 xfstests failure
hfsplus: fix volume corruption issue for generic/498
hfsplus: fix volume corruption issue for generic/480
hfsplus: ensure sb->s_fs_info is always cleaned up
hfs: ensure sb->s_fs_info is always cleaned up
Linus Torvalds [Mon, 9 Feb 2026 23:55:41 +0000 (15:55 -0800)]
Merge tag 'nilfs2-v7.0-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/nilfs2
Pull nilfs2 updates from Viacheslav Dubeyko:
- Fix potential block overflow that cause system hang
When executing the FITRIM command, an underflow can occur in the
calculation of nblocks. This ultimately leads to the block layer
function __blkdev_issue_discard() taking an excessively long time
to process the bio chain, and the ns_segctor_sem lock remains held
for a long period.
This prevents other tasks from acquiring the ns_segctor_sem lock,
resulting in a hang reported by syzbot (Edward Adam Davis)
- Fix missing struct keywords in nilfs2_api.h kernel-doc (Ryusuke
Konishi)
- Convert nilfs_super_block to kernel-doc
Eliminate 40+ kernel-doc warnings in nilfs2_ondisk.h by converting
all of the struct member comments to kernel-doc comments (Randy
Dunlap)
* tag 'nilfs2-v7.0-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/nilfs2:
nilfs2: fix missing struct keywords in nilfs2_api.h kernel-doc
nilfs2: convert nilfs_super_block to kernel-doc
nilfs2: Fix potential block overflow that cause system hang
Namjae Jeon [Mon, 9 Feb 2026 12:33:44 +0000 (21:33 +0900)]
ksmbd: convert tree_conns_lock to rw_semaphore
Converts tree_conns_lock to an rw_semaphore to allow sleeping while
the lock is held. Additionally, it simplifies the locking logic in
ksmbd_tree_conn_session_logoff() and introduces
__ksmbd_tree_conn_disconnect() to avoid redundant locking.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Namjae Jeon [Mon, 9 Feb 2026 12:01:01 +0000 (21:01 +0900)]
ksmbd: fix missing chann_lock while iterating session channel list
Add chann_lock while iterating ksmbd_chann_list in show_proc_session() and
show_proc_sessions(). This will prevents a race condition with concurrent
channel list modifications.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Mon, 9 Feb 2026 23:45:21 +0000 (15:45 -0800)]
Merge tag 'for-6.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"User visible changes, feature updates:
- when using block size > page size, enable direct IO
- fallback to buffered IO if the data profile has duplication,
workaround to avoid checksum mismatches on block group profiles
with redundancy, real direct IO is possible on single or RAID0
- redo export of zoned statistics, moved from sysfs to
/proc/pid/mountstats due to size limitations of the former
Experimental features:
- remove offload checksum tunable, intended to find best way to do it
but since we've switched to offload to thread for everything we
don't need it anymore
- initial support for remap-tree feature, a translation layer of
logical block addresses that allow changes without moving/rewriting
blocks to do eg. relocation, or other changes that require COW
Notable fixes:
- automatic removal of accidentally leftover chunks when
free-space-tree is enabled since mkfs.btrfs v6.16.1
- zoned mode:
- do not try to append to conventional zones when RAID is mixing
zoned and conventional drives
- fixup write pointers when mixing zoned and conventional on
DUP/RAID* profiles
- when using squota, relax deletion rules for qgroups with 0 members
to allow easier recovery from accounting bugs, also add more checks
to detect bad accounting
- fix periodic reclaim scanning, properly check boundary conditions
not to trigger it unexpectedly or miss the time to run it
- trim:
- continue after first error
- change reporting to the first detected error
- add more cancellation points
- reduce contention of big device lock that can block other
operations when there's lots of trimmed space
- when chunk allocation is forced (needs experimental build) fix
transaction abort when unexpected space layout is detected
Core:
- switch to crypto library API for checksumming, removed module
dependencies, pointer indirections, etc.
- error handling improvements
- adjust how and where transaction commit or abort are done and are
maybe not necessary
- minor compression optimization to skip single block ranges
- improve how compression folios are handled
- new and updated selftests
- cleanups, refactoring:
- auto-freeing and other automatic variable cleanup conversion
- structure size optimizations
- condition annotations"
* tag 'for-6.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (137 commits)
btrfs: get rid of compressed_bio::compressed_folios[]
btrfs: get rid of compressed_folios[] usage for encoded writes
btrfs: get rid of compressed_folios[] usage for compressed read
btrfs: remove the old btrfs_compress_folios() infrastructure
btrfs: switch to btrfs_compress_bio() interface for compressed writes
btrfs: introduce btrfs_compress_bio() helper
btrfs: zlib: introduce zlib_compress_bio() helper
btrfs: zstd: introduce zstd_compress_bio() helper
btrfs: lzo: introduce lzo_compress_bio() helper
btrfs: zoned: factor out the zone loading part into a testable function
btrfs: add cleanup function for btrfs_free_chunk_map
btrfs: tests: add cleanup functions for test specific functions
btrfs: raid56: fix memory leak of btrfs_raid_bio::stripe_uptodate_bitmap
btrfs: tests: add unit tests for pending extent walking functions
btrfs: fix EEXIST abort due to non-consecutive gaps in chunk allocation
btrfs: fix transaction commit blocking during trim of unallocated space
btrfs: handle user interrupt properly in btrfs_trim_fs()
btrfs: preserve first error in btrfs_trim_fs()
btrfs: continue trimming remaining devices on failure
btrfs: do not BUG_ON() in btrfs_remove_block_group()
...
Linus Torvalds [Mon, 9 Feb 2026 23:13:05 +0000 (15:13 -0800)]
Merge tag 'vfs-7.0-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains a mix of VFS cleanups, performance improvements, API
fixes, documentation, and a deprecation notice.
Scalability and performance:
- Rework pid allocation to only take pidmap_lock once instead of
twice during alloc_pid(), improving thread creation/teardown
throughput by 10-16% depending on false-sharing luck. Pad the
namespace refcount to reduce false-sharing
- Track file lock presence via a flag in ->i_opflags instead of
reading ->i_flctx, avoiding false-sharing with ->i_readcount on
open/close hot paths. Measured 4-16% improvement on 24-core
open-in-a-loop benchmarks
- Use a consume fence in locks_inode_context() to match the
store-release/load-consume idiom, eliminating a hardware fence on
some architectures
- Annotate cdev_lock with __cacheline_aligned_in_smp to prevent
false-sharing
- Remove a redundant DCACHE_MANAGED_DENTRY check in
__follow_mount_rcu() that never fires since the caller already
verifies it, eliminating a 100% mispredicted branch
- Fix a 100% mispredicted likely() in devcgroup_inode_permission()
that became wrong after a prior code reorder
Bug fixes and correctness:
- Make insert_inode_locked() wait for inode destruction instead of
skipping, fixing a corner case where two matching inodes could
exist in the hash
- Move f_mode initialization before file_ref_init() in alloc_file()
to respect the SLAB_TYPESAFE_BY_RCU ordering contract
- Add a WARN_ON_ONCE guard in try_to_free_buffers() for folios with
no buffers attached, preventing a null pointer dereference when
AS_RELEASE_ALWAYS is set but no release_folio op exists
- Fix select restart_block to store end_time as timespec64, avoiding
truncation of tv_sec on 32-bit architectures
- Make dump_inode() use get_kernel_nofault() to safely access inode
and superblock fields, matching the dump_mapping() pattern
API modernization:
- Make posix_acl_to_xattr() allocate the buffer internally since
every single caller was doing it anyway. Reduces boilerplate and
unnecessary error checking across ~15 filesystems
- Replace deprecated simple_strtoul() with kstrtoul() for the
ihash_entries, dhash_entries, mhash_entries, and mphash_entries
boot parameters, adding proper error handling
- Convert chardev code to use guard(mutex) and __free(kfree) cleanup
patterns
- Replace min_t() with min() or umin() in VFS code to avoid silently
truncating unsigned long to unsigned int
- Gate LOOKUP_RCU assertions behind CONFIG_DEBUG_VFS since callers
already check the flag
Deprecation:
- Begin deprecating legacy BSD process accounting (acct(2)). The
interface has numerous footguns and better alternatives exist
(eBPF)
Documentation:
- Fix and complete kernel-doc for struct export_operations, removing
duplicated documentation between ReST and source
- Fix kernel-doc warnings for __start_dirop() and ilookup5_nowait()
Testing:
- Add a kunit test for initramfs cpio handling of entries with
filesize > PATH_MAX
Misc:
- Add missing <linux/init_task.h> include in fs_struct.c"
* tag 'vfs-7.0-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (28 commits)
posix_acl: make posix_acl_to_xattr() alloc the buffer
fs: make insert_inode_locked() wait for inode destruction
initramfs_test: kunit test for cpio.filesize > PATH_MAX
fs: improve dump_inode() to safely access inode fields
fs: add <linux/init_task.h> for 'init_fs'
docs: exportfs: Use source code struct documentation
fs: move initializing f_mode before file_ref_init()
exportfs: Complete kernel-doc for struct export_operations
exportfs: Mark struct export_operations functions at kernel-doc
exportfs: Fix kernel-doc output for get_name()
acct(2): begin the deprecation of legacy BSD process accounting
device_cgroup: remove branch hint after code refactor
VFS: fix __start_dirop() kernel-doc warnings
fs: Describe @isnew parameter in ilookup5_nowait()
fs/namei: Remove redundant DCACHE_MANAGED_DENTRY check in __follow_mount_rcu
fs: only assert on LOOKUP_RCU when built with CONFIG_DEBUG_VFS
select: store end_time as timespec64 in restart block
chardev: Switch to guard(mutex) and __free(kfree)
namespace: Replace simple_strtoul with kstrtoul to parse boot params
dcache: Replace simple_strtoul with kstrtoul in set_dhash_entries
...
Linus Torvalds [Mon, 9 Feb 2026 23:08:16 +0000 (15:08 -0800)]
Merge tag 'vfs-7.0-rc1.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs iomap updates from Christian Brauner:
- Erofs page cache sharing preliminaries:
Plumb a void *private parameter through iomap_read_folio() and
iomap_readahead() into iomap_iter->private, matching iomap DIO. Erofs
uses this to replace a bogus kmap_to_page() call, as preparatory work
for page cache sharing.
- Fix for invalid folio access:
Fix an invalid folio access when a folio without iomap_folio_state
is fully submitted to the IO helper — the helper may call
folio_end_read() at any time, so ctx->cur_folio must be invalidated
after full submission.
* tag 'vfs-7.0-rc1.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: fix invalid folio access after folio_end_read()
erofs: hold read context in iomap_iter if needed
iomap: stash iomap read ctx in the private field of iomap_iter
Linus Torvalds [Mon, 9 Feb 2026 22:43:47 +0000 (14:43 -0800)]
Merge tag 'vfs-7.0-rc1.namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
- statmount: accept fd as a parameter
Extend struct mnt_id_req with a file descriptor field and a new
STATMOUNT_BY_FD flag. When set, statmount() returns mount information
for the mount the fd resides on — including detached mounts
(unmounted via umount2(MNT_DETACH)).
For detached mounts the STATMOUNT_MNT_POINT and STATMOUNT_MNT_NS_ID
mask bits are cleared since neither is meaningful. The capability
check is skipped for STATMOUNT_BY_FD since holding an fd already
implies prior access to the mount and equivalent information is
available through fstatfs() and /proc/pid/mountinfo without
privilege. Includes comprehensive selftests covering both attached
and detached mount cases.
- fs: Remove internal old mount API code (1 patch)
Now that every in-tree filesystem has been converted to the new
mount API, remove all the legacy shim code in fs_context.c that
handled unconverted filesystems. This deletes ~280 lines including
legacy_init_fs_context(), the legacy_fs_context struct, and
associated wrappers. The mount(2) syscall path for userspace remains
untouched. Documentation references to the legacy callbacks are
cleaned up.
- mount: add OPEN_TREE_NAMESPACE to open_tree()
Container runtimes currently use CLONE_NEWNS to copy the caller's
entire mount namespace — only to then pivot_root() and recursively
unmount everything they just copied. With large mount tables and
thousands of parallel container launches this creates significant
contention on the namespace semaphore.
OPEN_TREE_NAMESPACE copies only the specified mount tree (like
OPEN_TREE_CLONE) but returns a mount namespace fd instead of a
detached mount fd. The new namespace contains the copied tree mounted
on top of a clone of the real rootfs.
This functions as a combined unshare(CLONE_NEWNS) + pivot_root() in a
single syscall. Works with user namespaces: an unshare(CLONE_NEWUSER)
followed by OPEN_TREE_NAMESPACE creates a mount namespace owned by
the new user namespace. Mount namespace file mounts are excluded from
the copy to prevent cycles. Includes ~1000 lines of selftests"
* tag 'vfs-7.0-rc1.namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/open_tree: add OPEN_TREE_NAMESPACE tests
mount: add OPEN_TREE_NAMESPACE
fs: Remove internal old mount API code
selftests: statmount: tests for STATMOUNT_BY_FD
statmount: accept fd as a parameter
statmount: permission check should return EPERM
Feng Jiang [Mon, 26 Jan 2026 04:09:58 +0000 (21:09 -0700)]
riscv: lib: optimize strlen loop efficiency
Optimize the generic strlen implementation by using a pre-decrement
pointer. This reduces the loop body from 4 instructions to 3 and
eliminates the unconditional jump ('j').
Add a test to v_ptrace test suite to verify that ptrace accepts the
valid input combinations of vector csr registers. Use kselftest
fixture variants to create multiple inputs for the test.
The test simulates a debug scenario with three breakpoints:
0. init: let the tracee set up its initial vector configuration
1. 1st bp: modify the tracee's vector csr registers from the debugger
- resume the tracee to execute a block without vector instructions
2. 2nd bp: read back the tracees's vector csr registers from the debugger
- compare with values set by the debugger
- resume the tracee to execute a block with vector instructions
3. 3rd bp: read back the tracess's vector csr registers again
- compare with values set by the debugger
The last check helps to confirm that ptrace validation check for vector
csr registers input values works properly and maintains an accurate view
of the tracee's vector context in debugger.
Add a test to v_ptrace test suite to verify that ptrace rejects the
invalid input combinations of vector csr registers. Use kselftest
fixture variants to create multiple invalid inputs for the test.
Add a test to v_ptrace test suite to verify that vector csr registers
are clobbered on syscalls.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Reviewed-by: Andy Chiu <andybnac@gmail.com> Tested-by: Andy Chiu <andybnac@gmail.com> Link: https://patch.msgid.link/20251214163537.1054292-8-geomatsi@gmail.com
[pjw@kernel.org: cleaned up a checkpatch issue] Signed-off-by: Paul Walmsley <pjw@kernel.org>
Add a test case to check ptrace behavior in the case when vector
extension is supported by the system, but vector context is not
yet enabled for the traced process.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Reviewed-by: Andy Chiu <andybnac@gmail.com> Tested-by: Andy Chiu <andybnac@gmail.com> Link: https://patch.msgid.link/20251214163537.1054292-6-geomatsi@gmail.com
[pjw@kernel.org: dropped duplicate sys/wait.h include] Signed-off-by: Paul Walmsley <pjw@kernel.org>
Add strict validation for vector csr registers when setting them via
ptrace:
- reject attempts to set reserved bits or invalid field combinations
- enforce strict VL checks against calculated VLMAX values
Vector specs 0.7.1 and 1.0 allow normal applications to set candidate
VL values and read back the hardware-adjusted results, see section 6
for details. Disallow such flexibility in vector ptrace operations
and strictly enforce valid VL input.
The traced process may not update its saved vector context if no vector
instructions execute between breakpoints. So the purpose of the strict
ptrace approach is to make sure that debuggers maintain an accurate view
of the tracee's vector context across multiple halt/resume debug cycles.
riscv: vector: init vector context with proper vlenb
The vstate in thread_struct is zeroed when the vector context is
initialized. That includes read-only register vlenb, which holds
the vector register length in bytes. Zeroed state persists until
mstatus.VS becomes 'dirty' and a context switch saves the actual
hardware values.
This can expose the zero vlenb value to the user-space in early
debug scenarios, e.g. when ptrace attaches to a traced process
early, before any vector instruction except the first one was
executed.
Fix this by specifying proper vlenb on vector context init.
Linus Torvalds [Mon, 9 Feb 2026 22:25:37 +0000 (14:25 -0800)]
Merge tag 'vfs-7.0-rc1.atomic_open' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs atomic_open updates from Christian Brauner:
"Allow knfsd to use atomic_open()
While knfsd offers combined exclusive create and open results to
clients, on some filesystems those results are not atomic. The
separate vfs_create() + vfs_open() sequence in dentry_create() can
produce races and unexpected errors. For example, open O_CREAT with
mode 0 will succeed in creating the file but return -EACCES from
vfs_open(). Additionally, network filesystems benefit from reducing
remote round-trip operations by using a single atomic_open() call.
Teach dentry_create() -- whose sole caller is knfsd -- to use
atomic_open() for filesystems that support it"
* tag 'vfs-7.0-rc1.atomic_open' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/namei: fix kernel-doc markup for dentry_create
VFS/knfsd: Teach dentry_create() to use atomic_open()
VFS: Prepare atomic_open() for dentry_create()
VFS: move dentry_create() from fs/open.c to fs/namei.c
Linus Torvalds [Mon, 9 Feb 2026 21:41:34 +0000 (13:41 -0800)]
Merge tag 'vfs-7.0-rc1.nullfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs nullfs update from Christian Brauner:
"Add a completely catatonic minimal pseudo filesystem called "nullfs"
and make pivot_root() work in the initramfs.
Currently pivot_root() does not work on the real rootfs because it
cannot be unmounted. Userspace has to recursively delete initramfs
contents manually before continuing boot, using the fragile
switch_root sequence (overmount + chroot).
Add nullfs, a minimal immutable filesystem that serves as the true
root of the mount hierarchy. The mutable rootfs (tmpfs/ramfs) is
mounted on top of it. This allows userspace to simply:
without the traditional switch_root workarounds. systemd already
handles this correctly. It tries pivot_root() first and falls back
to MS_MOVE only when that fails.
This also means rootfs mounts in unprivileged namespaces no longer
need MNT_LOCKED, since the immutable nullfs guarantees nothing can be
revealed by unmounting the covering mount.
nullfs is a single-instance filesystem (get_tree_single()) marked
SB_NOUSER | SB_I_NOEXEC | SB_I_NODEV with an immutable empty root
directory. This means sooner or later it can be used to overmount
other directories to hide their contents without any additional
protection needed.
We enable it unconditionally. If we see any real regression we'll
hide it behind a boot option.
nullfs has extensions beyond this in the future. It will serve as a
concept to support the creation of completely empty mount namespaces -
which is work coming up in the next cycle"
* tag 'vfs-7.0-rc1.nullfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: use nullfs unconditionally as the real rootfs
docs: mention nullfs
fs: add immutable rootfs
fs: add init_pivot_root()
fs: ensure that internal tmpfs mount gets mount id zero
Daniel Hodges [Fri, 6 Feb 2026 20:41:46 +0000 (15:41 -0500)]
SUNRPC: fix gss_auth kref leak in gss_alloc_msg error path
Commit 5940d1cf9f42 ("SUNRPC: Rebalance a kref in auth_gss.c") added
a kref_get(&gss_auth->kref) call to balance the gss_put_auth() done
in gss_release_msg(), but forgot to add a corresponding kref_put()
on the error path when kstrdup_const() fails.
If service_name is non-NULL and kstrdup_const() fails, the function
jumps to err_put_pipe_version which calls put_pipe_version() and
kfree(gss_msg), but never releases the gss_auth reference. This leads
to a kref leak where the gss_auth structure is never freed.
Add a forward declaration for gss_free_callback() and call kref_put()
in the err_put_pipe_version error path to properly release the
reference taken earlier.
Fixes: 5940d1cf9f42 ("SUNRPC: Rebalance a kref in auth_gss.c") Cc: stable@vger.kernel.org Signed-off-by: Daniel Hodges <git@danielhodges.dev> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Linus Torvalds [Mon, 9 Feb 2026 21:38:07 +0000 (13:38 -0800)]
Merge tag 'vfs-7.0-rc1.minix' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull minix update from Christian Brauner:
"Consolidate and strengthen superblock validation in
minix_check_superblock()
The minix filesystem driver does not validate several superblock
fields before using them during mount, allowing a crafted filesystem
image to trigger out-of-bounds accesses (reported by syzbot)"
* tag 'vfs-7.0-rc1.minix' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
minix: Add required sanity checking to minix_check_superblock()
Linus Torvalds [Mon, 9 Feb 2026 21:05:35 +0000 (13:05 -0800)]
Merge tag 'vfs-7.0-rc1.btrfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs updates for btrfs from Christian Brauner:
"This contains some changes for btrfs that are taken to the vfs tree to
stop duplicating VFS code for subvolume/snapshot dentry
Btrfs has carried private copies of the VFS may_delete() and
may_create() functions in fs/btrfs/ioctl.c for permission checks
during subvolume creation and snapshot destruction. These copies have
drifted out of sync with the VFS originals — btrfs_may_delete() is
missing the uid/gid validity check and btrfs_may_create() is missing
the audit_inode_child() call.
Export the VFS functions as may_{create,delete}_dentry() and switch
btrfs to use them, removing ~70 lines of duplicated code"
* tag 'vfs-7.0-rc1.btrfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
btrfs: use may_create_dentry() in btrfs_mksubvol()
btrfs: use may_delete_dentry() in btrfs_ioctl_snap_destroy()
fs: export may_create() as may_create_dentry()
fs: export may_delete() as may_delete_dentry()
Linus Torvalds [Mon, 9 Feb 2026 20:21:37 +0000 (12:21 -0800)]
Merge tag 'vfs-7.0-rc1.fserror' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs error reporting updates from Christian Brauner:
"This contains the changes to support generic I/O error reporting.
Filesystems currently have no standard mechanism for reporting
metadata corruption and file I/O errors to userspace via fsnotify.
Each filesystem (xfs, ext4, erofs, f2fs, etc.) privately defines
EFSCORRUPTED, and error reporting to fanotify is inconsistent or
absent entirely.
This introduces a generic fserror infrastructure built around struct
super_block that gives filesystems a standard way to queue metadata
and file I/O error reports for delivery to fsnotify.
Errors are queued via mempools and queue_work to avoid holding
filesystem locks in the notification path; unmount waits for pending
events to drain. A new super_operations::report_error callback lets
filesystem drivers respond to file I/O errors themselves (to be used
by an upcoming XFS self-healing patchset).
On the uapi side, EFSCORRUPTED and EUCLEAN are promoted from private
per-filesystem definitions to canonical errno.h values across all
architectures"
* tag 'vfs-7.0-rc1.fserror' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ext4: convert to new fserror helpers
xfs: translate fsdax media errors into file "data lost" errors when convenient
xfs: report fs metadata errors via fsnotify
iomap: report file I/O errors to the VFS
fs: report filesystem and file I/O errors to fsnotify
uapi: promote EFSCORRUPTED and EUCLEAN to errno.h
Linus Torvalds [Mon, 9 Feb 2026 19:59:07 +0000 (11:59 -0800)]
Merge tag 'vfs-7.0-rc1.leases' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs lease updates from Christian Brauner:
"This contains updates for lease support to require filesystems to
explicitly opt-in to lease support
Currently kernel_setlease() falls through to generic_setlease() when a
a filesystem does not define ->setlease(), silently granting lease
support to every filesystem regardless of whether it is prepared for
it.
This is a poor default: most filesystems never intended to support
leases, and the silent fallthrough makes it impossible to distinguish
"supports leases" from "never thought about it".
This inverts the default. It adds explicit
.setlease = generic_setlease;
assignments to every in-tree filesystem that should retain lease
support, then changes kernel_setlease() to return -EINVAL when
->setlease is NULL.
With the new default in place, simple_nosetlease() is redundant and
is removed along with all references to it"
docs: process: maintainer-pgp-guide: update kernel.org docs link
Update http link to the documentation about how to add a kernel.org UID to
the maintainer's key. Add missing SPDX-License-Identifier to fix a
checkpatch warning.
Signed-off-by: Amitabh Srivastava <amitabh@amidevlab.com> Reviewed-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260205115554.7795-1-amitabh@amidevlab.com>
Randy Dunlap [Fri, 6 Feb 2026 06:54:40 +0000 (22:54 -0800)]
docs: kdoc_parser: allow __exit in function prototypes
Handle functions that are marked with __exit to prevent warnings:
Documentation/networking/iucv:35: ../net/iucv/iucv.c:1918: WARNING: Error in declarator or parameters
Invalid C declaration: Expecting "(" in parameters. [error at 12]
void __exit iucv_exit (void)
------------^
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260206065440.2412185-1-rdunlap@infradead.org>
Linus Torvalds [Mon, 9 Feb 2026 19:25:01 +0000 (11:25 -0800)]
Merge tag 'vfs-7.0-rc1.nonblocking_timestamps' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs timestamp updates from Christian Brauner:
"This contains the changes to support non-blocking timestamp updates.
Since commit 66fa3cedf16a ("fs: Add async write file modification
handling") file_update_time_flags() unconditionally returns -EAGAIN
when any timestamp needs updating and IOCB_NOWAIT is set. This makes
non-blocking direct writes impossible on file systems with granular
enough timestamps, which in practice means all of them.
This reworks the timestamp update path to propagate IOCB_NOWAIT
through ->update_time so that file systems which can update timestamps
without blocking are no longer penalized.
With that groundwork in place, the core change passes IOCB_NOWAIT into
->update_time and returns -EAGAIN only when the file system indicates
it would block.
XFS implements non-blocking timestamp updates by using the new
->sync_lazytime and open-coding generic_update_time without the
S_NOWAIT check, since the lazytime path through the generic helpers
can never block in XFS"
* tag 'vfs-7.0-rc1.nonblocking_timestamps' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
xfs: enable non-blocking timestamp updates
xfs: implement ->sync_lazytime
fs: refactor file_update_time_flags
fs: add support for non-blocking timestamp updates
fs: add a ->sync_lazytime method
fs: factor out a sync_lazytime helper
fs: refactor ->update_time handling
fat: cleanup the flags for fat_truncate_time
nfs: split nfs_update_timestamps
fs: allow error returns from generic_update_time
fs: remove inode_update_time
Chen Ni [Tue, 3 Feb 2026 01:09:40 +0000 (09:09 +0800)]
nfs: nfs4proc: Convert comma to semicolon
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Chenguang Zhao [Mon, 8 Dec 2025 08:53:48 +0000 (16:53 +0800)]
SUNRPC: Change list definition method
The LIST_HEAD macro can both define a linked list and initialize
it in one step. To simplify code, we replace the separate operations
of linked list definition and manual initialization with the LIST_HEAD
macro.
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Ben Dooks [Tue, 6 Jan 2026 17:37:45 +0000 (17:37 +0000)]
sunrpc: rpc_debug and others are defined even if CONFIG_SUNRPC_DEBUG unset
The rpc_debug, nfs_debug, nfsd_debug and nlm_debug are exported
even if CONFIG_SUNRPC_DEBUG is not set. This means that the
debug header should also define these to remove the following
sparse warnings:
net/sunrpc/sysctl.c:29:17: warning: symbol 'rpc_debug' was not declared. Should it be static?
net/sunrpc/sysctl.c:32:17: warning: symbol 'nfs_debug' was not declared. Should it be static?
net/sunrpc/sysctl.c:35:17: warning: symbol 'nfsd_debug' was not declared. Should it be static?
net/sunrpc/sysctl.c:38:17: warning: symbol 'nlm_debug' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Linus Torvalds [Mon, 9 Feb 2026 19:03:25 +0000 (11:03 -0800)]
Merge tag 'vfs-7.0-rc1.initrd' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs initrd removal from Christian Brauner:
"Remove the deprecated linuxrc-based initrd code path and related dead
code. The linuxrc initrd path was deprecated in 2020 and this series
completes its removal. If we see real-life regressions we'll revert.
The core change removes handle_initrd() and init_linuxrc() — the
entire flow that ran /linuxrc from an initrd, pivoted roots, and
handed off to the real root filesystem. With that gone, initrd_load()
becomes void (no longer short-circuits prepare_namespace()),
rd_load_image() is simplified to always load /initrd.image instead of
taking a path, and rd_load_disk() is deleted.
The /proc/sys/kernel/real-root-dev sysctl and its backing variable are
removed since they only existed for linuxrc to communicate the real
root device back to the kernel.
The no-op load_ramdisk= and prompt_ramdisk= parameters are dropped,
and noinitrd and ramdisk_start= gain deprecation warnings.
Initramfs is entirely unaffected. The non-linuxrc initrd path
(root=/dev/ram0) is preserved but now carries a deprecation warning
targeting January 2027 removal"
* tag 'vfs-7.0-rc1.initrd' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
init: remove /proc/sys/kernel/real-root-dev
initrd: remove deprecated code path (linuxrc)
init: remove deprecated "load_ramdisk" and "prompt_ramdisk" command line parameters
Thomas Richter [Mon, 9 Feb 2026 15:32:56 +0000 (16:32 +0100)]
perf test: Fix test case perftool-testsuite_report for s390
Test case perftool-testsuite_report fails on s390 for some time
now.
Root cause is a time out which is too tight for large s390 machines.
The time out value addr2line_timeout_ms is per default set to 1 second.
This is the maximum time the function read_addr2line_record() waits for
a reply from the forked off tool addr2line, which is started as a child
in interactive mode.
It reads stdin (an address in hexadecimal) and replies on stdout with
function name, file name and line number. This might take more than one
second.
However one second is not always enough and the reply from addr2line
tool is not received. Function read_addr2line_record() fails and emits
a warning, which is not expected by the test case. It fails.
Output before:
# perf test -F 133
-- [ PASS ] -- perf_report :: setup :: prepare the perf.data file
==================
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.087 MB \
/tmp/perftool-testsuite_report.FHz/perf_report/perf.data.1 \
(207 samples) ]
==================
-- [ PASS ] -- perf_report :: setup :: prepare the perf.data.1 file
## [ PASS ] ## perf_report :: setup SUMMARY
-- [ SKIP ] -- perf_report :: test_basic :: help message :: testcase skipped
Line did not match any pattern: "cmd__addr2line /usr/lib/debug/lib/modules/
6.19.0-20260205.rc8.git366.9845cf73f7db.300.fc43.s390x+next/
vmlinux: could not read first record"
Line did not match any pattern: "cmd__addr2line /usr/lib/debug/lib/modules/
6.19.0-20260205.rc8.git366.9845cf73f7db.300.fc43.s390x+next/
vmlinux: could not read first record"
-- [ FAIL ] -- perf_report :: test_basic :: basic execution
(output regexp parsing)
....
133: perftool-testsuite_report : FAILED!
perf test code_with_type.sh: Skip test if rust wasn't available at build time
$ perf test 'perf data type profiling tests'
83: perf data type profiling tests : Skip
$ perf test -vv 'perf data type profiling tests'
83: perf data type profiling tests:
--- start ---
test child forked, pid 977213
Skip: code_with_type workload not built in 'perf test'
---- end(-2) ----
83: perf data type profiling tests : Skip
$
Cc: Dmitrii Dolgov <9erthalion6@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Mon, 9 Feb 2026 18:41:56 +0000 (10:41 -0800)]
Merge tag 'vfs-7.0-rc1.rust' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs rust updates from Christian Brauner:
"Allow inlining C helpers into Rust when using LTO: Add the
__rust_helper annotation to all VFS-related Rust helper functions.
Currently, C helpers cannot be inlined into Rust code even under LTO
because LLVM detects slightly different codegen options between the C
and Rust compilation units (differing null-pointer-check flags,
builtin lists, and target feature strings). The __rust_helper macro is
the first step toward fixing this: it is currently #defined to
nothing, but a follow-up series will change it to __always_inline when
compiling with LTO (while keeping it empty for bindgen, which ignores
inline functions).
This picks up the VFS portion (fs, pid_namespace, poll) of a larger
tree-wide series"
* tag 'vfs-7.0-rc1.rust' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
rust: poll: add __rust_helper to helpers
rust: pid_namespace: add __rust_helper to helpers
rust: fs: add __rust_helper to helpers
Sergey Shtylyov [Mon, 8 Dec 2025 20:15:04 +0000 (23:15 +0300)]
NFSv4: limit lease period in nfs4_set_lease_period()
In nfs4_set_lease_period(), the passed 32-bit lease period in seconds is
multiplied by HZ -- that might overflow before being implicitly cast to
*unsigned long* (32/64-bit type), while initializing the lease variable.
Cap the lease period at MAX_LEASE_PERIOD (#define'd to 1 hour for now),
before multipying to avoid such overflow...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Sergey Shtylyov [Mon, 8 Dec 2025 20:15:03 +0000 (23:15 +0300)]
NFSv4: pass lease period in seconds to nfs4_set_lease_period()
There's no need to multiply the lease period by HZ at all the call sites of
nfs4_set_lease_period() -- it makes more sense to do that only once, inside
that function, by passing to it lease period as 32-bit # of seconds instead
of 32/64-bit *unsigned long* # of jiffies...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Stephen Smalley [Wed, 3 Dec 2025 19:57:28 +0000 (14:57 -0500)]
nfs: unify security_inode_listsecurity() calls
commit 243fea134633 ("NFSv4.2: fix listxattr to return selinux
security label") introduced a direct call to
security_inode_listsecurity() in nfs4_listxattr(). However,
nfs4_listxattr() already indirectly called
security_inode_listsecurity() via nfs4_listxattr_nfs4_label() if
CONFIG_NFS_V4_SECURITY_LABEL is enabled and the server has the
NFS_CAP_SECURITY_LABEL capability enabled. This duplication was fixed
by commit 9acb237deff7 ("NFSv4.2: another fix for listxattr") by
making the second call conditional on NFS_CAP_SECURITY_LABEL not being
set by the server. However, the combination of the two changes
effectively makes one call to security_inode_listsecurity() in every
case - which is the desired behavior since getxattr() always returns a
security xattr even if it has to synthesize one. Further, the two
different calls produce different xattr name ordering between
security.* and user.* xattr names. Unify the two separate calls into a
single call and get rid of nfs4_listxattr_nfs4_label() altogether.
Sagi Grimberg [Sat, 27 Dec 2025 10:46:29 +0000 (12:46 +0200)]
fs/nfs: Fix readdir slow-start regression
Commit 580f236737d1 ("NFS: Adjust the amount of readahead
performed by NFS readdir") reduces the amount of readahead names
caching done by the client.
The downside of this approach is READDIR now may suffer from
a slow-start issue, where initially it will fetch names that fit
in a single page, then in 2, 4, 8 until the maximum supported
transfer size (usually 1M).
This patch tries to take a balanced approach between mitigating
the slow-start issue still maintaining some efficiency gains.
Fixes: 580f236737d1 ("NFS: Adjust the amount of readahead performed by NFS readdir") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Linus Torvalds [Mon, 9 Feb 2026 18:38:05 +0000 (10:38 -0800)]
Merge tag 'selinux-pr-20260203' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Add support for SELinux based access control of BPF tokens
We worked with the BPF devs to add the necessary LSM hooks when the
BPF token code was first introduced, but it took us a bit longer to
add the SELinux wiring and support.
In order to preserve existing token-unaware SELinux policies, the new
code is gated by the new "bpf_token_perms" policy capability.
Additional details regarding the new permissions, and behaviors can
be found in the associated commit.
- Remove a BUG() from the SELinux capability code
We now perform a similar check during compile time so we can safely
remove the BUG() call.
* tag 'selinux-pr-20260203' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: drop the BUG() in cred_has_capability()
selinux: fix a capabilities parsing typo in selinux_bpf_token_capable()
selinux: add support for BPF token access control
selinux: move the selinux_blob_sizes struct
Linus Torvalds [Mon, 9 Feb 2026 18:16:48 +0000 (10:16 -0800)]
Merge tag 'lsm-pr-20260203' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Unify the security_inode_listsecurity() calls in NFSv4
While looking at security_inode_listsecurity() with an eye towards
improving the interface, we realized that the NFSv4 code was making
multiple calls to the LSM hook that could be consolidated into one.
- Mark the LSM static branch keys as static - this helps resolve some
sparse warnings
- Add __rust_helper annotations to the LSM and cred wrapper functions
- Remove the unsused set_security_override_from_ctx() function
- Minor fixes to some of the LSM kdoc comment blocks
* tag 'lsm-pr-20260203' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: make keys for static branch static
cred: remove unused set_security_override_from_ctx()
rust: security: add __rust_helper to helpers
rust: cred: add __rust_helper to helpers
nfs: unify security_inode_listsecurity() calls
lsm: fix kernel-doc struct member names
Linus Torvalds [Mon, 9 Feb 2026 18:13:03 +0000 (10:13 -0800)]
Merge tag 'audit-pr-20260203' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
- Improve the NETFILTER_PKT audit records
Add source and destination ports to the NETFILTER_PKT audit records
while also consolidating a lot of the code into a new, singular
audit_log_nf_skb() function. This new approach to structuring the
NETFILTER_PKT record generation should eliminate some unnecessary
overhead when audit is not built into the kernel.
- Update the audit syscall classifier code
Add the listxattrat(), getxattrat(), and fchmodat2() syscall to the
audit code which classifies syscalls into categories of operations,
e.g. "read" or "change attributes".
- Move the syscall classifier declarations into audit_arch.h
Shuffle around some header file declarations to resolve some sparse
warnings.
* tag 'audit-pr-20260203' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: move the compat_xxx_class[] extern declarations to audit_arch.h
audit: add missing syscalls to read class
audit: include source and destination ports to NETFILTER_PKT
audit: add audit_log_nf_skb helper function
audit: add fchmodat2() to change attributes class
* tag 'i3c/for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (52 commits)
i3c: dw-i3c-master: fix SIR reject bit mapping for dynamic addresses
i3c: dw-i3c-master: convert spinlock usage to scoped guards
i3c: dw: Fix memory leak in dw_i3c_master_i2c_xfers()
i3c: mipi-i3c-hci-pci: Add System Suspend support
i3c: mipi-i3c-hci: Add optional System Suspend support
i3c: master: Add i3c_master_do_daa_ext() for post-hibernation address recovery
i3c: dw: Initialize spinlock to avoid upsetting lockdep
i3c: mipi-i3c-hci-pci: Add Runtime PM support
i3c: mipi-i3c-hci: Add optional Runtime PM support
i3c: master: Introduce optional Runtime PM support
i3c: mipi-i3c-hci: Factor out master dynamic address setting into helper
i3c: mipi-i3c-hci: Allow core re-initialization for Runtime PM support
i3c: mipi-i3c-hci: Factor out core initialization into helper
i3c: mipi-i3c-hci: Factor out IO mode setting into helper
i3c: mipi-i3c-hci: Factor out software reset into helper
i3c: mipi-i3c-hci: Add PIO suspend and resume support
i3c: mipi-i3c-hci: Refactor PIO register initialization
i3c: mipi-i3c-hci: Add DMA suspend and resume support
i3c: mipi-i3c-hci: Extract ring initialization from hci_dma_init()
i3c: mipi-i3c-hci: Introduce helper to restore DAT
...
Paolo Bonzini [Mon, 9 Feb 2026 17:53:47 +0000 (18:53 +0100)]
Merge tag 'kvm-x86-misc-6.20' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.20
- Disallow changing the virtual CPU model if L2 is active, for all the same
reasons KVM disallows change the model after the first KVM_RUN.
- Fix a bug where KVM would incorrectly reject host accesses to PV MSRs that
were advertised as supported to userspace when running with
KVM_CAP_ENFORCE_PV_FEATURE_CPUID enabled.
- Fix a bug where KVM would attempt to read protect guest state (CR3) when
configuring an async #PF entry.
- Fail the build if EXPORT_SYMBOL_GPL or EXPORT_SYMBOL is used in KVM (for x86
only) to enforce usage of EXPORT_SYMBOL_FOR_KVM_INTERNAL. Explicitly allow
the few exports that are intended for external usage.
- Ignore -EBUSY when checking nested events after a vCPU exits blocking as
the WARN is user-triggerable, and because exiting to userspace on -EBUSY
does more harm than good in pretty much every situation.
- Throw in the towel and drop the WARN on INIT/SIPI being blocked when vCPU is
in Wait-For-SIPI, as playing whack-a-mole with syzkaller turned out to be an
unwinnable game.
- Add support for new Intel instructions that don't require anything beyond
enumerating feature flags to userspace.
- Grab SRCU when reading PDPTRs in KVM_GET_SREGS2.
- Add WARNs to guard against modifying KVM's CPU caps outside of the intended
setup flow, as nested VMX in particular is sensitive to unexpected changes
in KVM's golden configuration.
- Add a quirk to allow userspace to opt-in to actually suppress EOI broadcasts
when the suppression feature is enabled by the guest (currently limited to
split IRQCHIP, i.e. userspace I/O APIC). Sadly, simply fixing KVM to honor
Suppress EOI Broadcasts isn't an option as some userspaces have come to rely
on KVM's buggy behavior (KVM advertises Supress EOI Broadcast irrespective
of whether or not userspace I/O APIC supports Directed EOIs).
Paolo Bonzini [Mon, 9 Feb 2026 17:51:37 +0000 (18:51 +0100)]
Merge tag 'kvm-x86-svm-6.20' of https://github.com/kvm-x86/linux into HEAD
KVM SVM changes for 6.20
- Drop a user-triggerable WARN on nested_svm_load_cr3() failure.
- Add support for virtualizing ERAPS. Note, correct virtualization of ERAPS
relies on an upcoming, publicly announced change in the APM to reduce the
set of conditions where hardware (i.e. KVM) *must* flush the RAP.
- Ignore nSVM intercepts for instructions that are not supported according to
L1's virtual CPU model.
- Add support for expedited writes to the fast MMIO bus, a la VMX's fastpath
for EPT Misconfig.
- Don't set GIF when clearing EFER.SVME, as GIF exists independently of SVM,
and allow userspace to restore nested state with GIF=0.
- Treat exit_code as an unsigned 64-bit value through all of KVM.
- Add support for fetching SNP certificates from userspace.
- Fix a bug where KVM would use vmcb02 instead of vmcb01 when emulating VMLOAD
or VMSAVE on behalf of L2.
Paolo Bonzini [Mon, 9 Feb 2026 17:50:04 +0000 (18:50 +0100)]
Merge tag 'kvm-x86-vmx-6.20' of https://github.com/kvm-x86/linux into HEAD
KVM VMX changes for 6.20
- Fix an SGX bug where KVM would incorrectly try to handle EPCM #PFs by always
relecting EPCM #PFs back into the guest. KVM doesn't shadow EPCM entries,
and so EPCM violations cannot be due to KVM interference, and can't be
resolved by KVM.
- Fix a bug where KVM would register its posted interrupt wakeup handler even
if loading kvm-intel.ko ultimately failed.
- Disallow access to vmcb12 fields that aren't fully supported, mostly to
avoid weirdness and complexity for FRED and other features, where KVM wants
enable VMCS shadowing for fields that conditionally exist.
- Print out the "bad" offsets and values if kvm-intel.ko refuses to load (or
refuses to online a CPU) due to a VMCS config mismatch.
Linus Torvalds [Mon, 9 Feb 2026 17:46:26 +0000 (09:46 -0800)]
Merge tag 'rcu.release.v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Boqun Feng:
- RCU Tasks Trace:
Re-implement RCU tasks trace in term of SRCU-fast, not only more than
500 lines of code are saved because of the reimplementation, a new
set of API, rcu_read_{,un}lock_tasks_trace(), becomes possible as
well. Compared to the previous rcu_read_{,un}lock_trace(), the new
API avoid the task_struct accesses thanks to the SRCU-fast semantics.
As a result, the old rcu_read{,un}lock_trace() API is now deprecated.
- RCU Torture Test:
- Multiple improvements on kvm-series.sh (parallel run and
progress showing metrics)
- Add context checks to rcu_torture_timer()
- Make config2csv.sh properly handle comments in .boot files
- Include commit discription in testid.txt
- Miscellaneous RCU changes:
- Reduce synchronize_rcu() latency by reporting GP kthread's
CPU QS early
- Use suitable gfp_flags for the init_srcu_struct_nodes()
- Fix rcu_read_unlock() deadloop due to softirq
- Correctly compute probability to invoke ->exp_current()
in rcutorture
- Make expedited RCU CPU stall warnings detect stall-end races
- RCU nocb:
- Remove unnecessary WakeOvfIsDeferred wake path and callback
overload handling
- Extract nocb_defer_wakeup_cancel() helper
* tag 'rcu.release.v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (25 commits)
rcu/nocb: Extract nocb_defer_wakeup_cancel() helper
rcu/nocb: Remove dead callback overload handling
rcu/nocb: Remove unnecessary WakeOvfIsDeferred wake path
rcu: Reduce synchronize_rcu() latency by reporting GP kthread's CPU QS early
srcu: Use suitable gfp_flags for the init_srcu_struct_nodes()
rcu: Fix rcu_read_unlock() deadloop due to softirq
rcutorture: Correctly compute probability to invoke ->exp_current()
rcu: Make expedited RCU CPU stall warnings detect stall-end races
rcutorture: Add --kill-previous option to terminate previous kvm.sh runs
rcutorture: Prevent concurrent kvm.sh runs on same source tree
torture: Include commit discription in testid.txt
torture: Make config2csv.sh properly handle comments in .boot files
torture: Make kvm-series.sh give run numbers and totals
torture: Make kvm-series.sh give build numbers and totals
torture: Parallelize kvm-series.sh guest-OS execution
rcutorture: Add context checks to rcu_torture_timer()
rcutorture: Test rcu_tasks_trace_expedite_current()
srcu: Create an rcu_tasks_trace_expedite_current() function
checkpatch: Deprecate rcu_read_{,un}lock_trace()
rcu: Update Requirements.rst for RCU Tasks Trace
...
Linus Torvalds [Mon, 9 Feb 2026 17:42:21 +0000 (09:42 -0800)]
Merge tag 'linux_kselftest-next-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
"resctrl test:
- fix division by zero error on Hygon
- fix non-contiguous CBM check for Hygon
- define CPU vendor IDs as bits to match usage
- add CPU vendor detection for Hygon
misc:
- coredeump test: use __builtin_trap() instead of a null pointer
- anon_inode: replace null pointers with empty arrays
- kublk: include message in _Static_assert for C11 compatibility
- run_kselftest.sh: add `--skip` argument option
- pidfd: fix typo in comment"
* tag 'linux_kselftest-next-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/pidfd: fix typo in comment
selftests/run_kselftest.sh: Add `--skip` argument option
selftests/resctrl: Fix non-contiguous CBM check for Hygon
selftests/resctrl: Add CPU vendor detection for Hygon
selftests/resctrl: Define CPU vendor IDs as bits to match usage
selftests/resctrl: Fix a division by zero error on Hygon
kselftest/kublk: include message in _Static_assert for C11 compatibility
kselftest/anon_inode: replace null pointers with empty arrays
kselftest/coredump: use __builtin_trap() instead of null pointer
Paolo Bonzini [Mon, 9 Feb 2026 17:38:54 +0000 (18:38 +0100)]
Merge tag 'kvm-x86-selftests-6.20' of https://github.com/kvm-x86/linux into HEAD
KVM selftests changes for 6.20
- Add a regression test for TPR<=>CR8 synchronization and IRQ masking.
- Overhaul selftest's MMU infrastructure to genericize stage-2 MMU support,
and extend x86's infrastructure to support EPT and NPT (for L2 guests).
- Extend several nested VMX tests to also cover nested SVM.
- Add a selftest for nested VMLOAD/VMSAVE.
- Rework the nested dirty log test, originally added as a regression test for
PML where KVM logged L2 GPAs instead of L1 GPAs, to improve test coverage
and to hopefully make the test easier to understand and maintain.
Linus Torvalds [Mon, 9 Feb 2026 17:37:55 +0000 (09:37 -0800)]
Merge tag 'linux_kselftest-kunit-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
"kunit:
- add __rust_helper to helpers
- fix up const mismatch in many assert functions
- fix up const mismatch in test_list_sort
- protect KUNIT_BINARY_STR_ASSERTION against ERR_PTR values
- respect KBUILD_OUTPUT env variable by default
- add bash completion
kunit tool:
- add test for nested test result reporting
- do not overwrite test status based on subtest counts
- add 32-bit big endian ARM configuration to qemu_configs
- rename test_data_path() to _test_data_path()
- do not rely on implicit working directory change"
* tag 'linux_kselftest-kunit-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: add bash completion
kunit: tool: test: Don't rely on implicit working directory change
kunit: tool: test: Rename test_data_path() to _test_data_path()
kunit: qemu_configs: Add 32-bit big endian ARM configuration
kunit: tool: Don't overwrite test status based on subtest counts
kunit: tool: Add test for nested test result reporting
kunit: respect KBUILD_OUTPUT env variable by default
kunit: Protect KUNIT_BINARY_STR_ASSERTION against ERR_PTR values
test_list_sort: fix up const mismatch
kunit: fix up const mis-match in many assert functions
rust: kunit: add __rust_helper to helpers
Arnd Bergmann [Mon, 2 Feb 2026 22:48:07 +0000 (23:48 +0100)]
vduse: avoid adding implicit padding
The vduse_iova_range_v2 and vduse_iotlb_entry_v2 structures are both
defined in a way that adds implicit padding and is incompatible between
i386 and x86_64 userspace because of the different structure alignment
requirements. Building the header with -Wpadded shows these new warnings:
vduse.h:305:1: error: padding struct size to alignment boundary with 4 bytes [-Werror=padded]
vduse.h:374:1: error: padding struct size to alignment boundary with 4 bytes [-Werror=padded]
Change the amount of padding in these two structures to align them to
64 bit words and avoid those problems. Since the v1 vduse_iotlb_entry
already has an inconsistent size, do not attempt to reuse the structure
but rather list the members indiviudally, with a fixed amount of
padding.
Fixes: 079212f6877e ("vduse: add vq group asid support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20260202224835.559538-1-arnd@kernel.org>
Paolo Bonzini [Mon, 9 Feb 2026 17:17:01 +0000 (18:17 +0100)]
Merge tag 'loongarch-kvm-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.20
1. Add more CPUCFG mask bits.
2. Improve feature detection.
3. Add FPU/LBT delay load support.
4. Set default return value in KVM IO bus ops.
5. Add paravirt preempt feature support.
6. Add KVM steal time test case for tools/selftests.
Takashi Iwai [Mon, 9 Feb 2026 16:39:11 +0000 (17:39 +0100)]
Merge tag 'asoc-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v7.0
This release is almost all abut driers, there's very little core work
here, although some of that driver work is in more generic areas like
SDCA and SOF:
- Generic SDCA support for reporting jack events.
- Continuing platform support, cleanup and feature improements for the
AMD, Intel, Qualcomm and SOF code.
- Platform description improvements for the Cirrus drivers.
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B.
We also pulled in one small SPI API update and some more substantial
regmap work (cache description improvements) for use in drivers.
projects / ceph-client.git / log