This is because the spin_lock would change to rt_mutex in PREEMPT_RT,
however the sprd_gpio->lock would use in hard-irq, this is unsafe.
So change the spin_lock_t to raw_spin_lock_t to use the spinlock
in hard-irq.
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20260126094209.9855-1-xuewen.yan@unisoc.com
[Bartosz: tweaked the commit message] Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Linus Torvalds [Tue, 27 Jan 2026 18:39:17 +0000 (10:39 -0800)]
Merge tag 'vfio-v6.19-rc8' of https://github.com/awilliam/linux-vfio
Pull VFIO fix from Alex Williamson:
- Fix a gap in the initial VFIO DMABUF implementation where it's
required to explicitly implement a failing pin callback to prevent
pinned importers that cannot properly support move_notify.
(Leon Romanovsky)
* tag 'vfio-v6.19-rc8' of https://github.com/awilliam/linux-vfio:
vfio: Prevent from pinned DMABUF importers to attach to VFIO DMABUF
Josh Poimboeuf [Mon, 26 Jan 2026 23:56:44 +0000 (15:56 -0800)]
livepatch/klp-build: Fix klp-build vs CONFIG_MODULE_SRCVERSION_ALL
When building a patch to a single-file kernel module with
CONFIG_MODULE_SRCVERSION_ALL enabled, the klp-build module link fails in
modpost:
Diffing objects
drivers/md/raid0.o: changed function: raid0_run
Building patch module: livepatch-0001-patch-raid0_run.ko
drivers/md/raid0.c: No such file or directory
...
The problem here is that klp-build copied drivers/md/.raid0.o.cmd to the
module build directory, but it didn't also copy over the input source
file listed in the .cmd file:
source_drivers/md/raid0.o := drivers/md/raid0.c
So modpost dies due to the missing .c file which is needed for
calculating checksums for CONFIG_MODULE_SRCVERSION_ALL.
Instead of copying the original .cmd file, just create an empty one.
Modpost only requires that it exists. The original object's build
dependencies are irrelevant for the frankenobjects used by klp-build.
Josh Poimboeuf [Mon, 26 Jan 2026 05:56:39 +0000 (21:56 -0800)]
objtool/klp: Fix bug table handling for __WARN_printf()
Running objtool klp-diff on a changed function which uses WARN() can
fail with:
vmlinux.o: error: objtool: md_run+0x866: failed to convert reloc sym '__bug_table' to its proper format
The problem is that since commit 5b472b6e5bd9 ("x86_64/bug: Implement
__WARN_printf()"), each __WARN_printf() call site now directly
references its bug table entry. klp-diff errors out when it can't
convert such section-based references to object symbols (because bug
table entries don't have symbols).
Luckily, klp-diff already has code to create symbols for bug table
entries. Move that code earlier, before function diffing.
Petr Pavlu [Mon, 26 Jan 2026 15:13:48 +0000 (16:13 +0100)]
objtool: Replace custom macros in elf.c with shared ones
The source file tools/objtool/elf.c defines the macros ALIGN_UP(),
ALIGN_UP_POW2() and MAX(). These macros unnecessarily duplicate
functionality already available under tools/include/, specifically ALIGN(),
roundup_pow_of_two() and max().
More importantly, the definition of ALIGN_UP_POW2() is incorrect when the
input is 1, as it results in a call to __builtin_clz(0), which produces an
undefined result. This issue impacts the function elf_alloc_reloc(). When
adding the first relocation to a section, the function allocates an
undefined number of relocations.
Replace the custom macros with the shared functionality to resolve these
issues.
Dmitry Safonov [Mon, 26 Jan 2026 04:57:35 +0000 (04:57 +0000)]
objtool: Print bfd_vma as unsigned long long on ia32-x86_64 cross build
When objtool is cross-compiled in ia32 container for x86_64 target it
fails with the following errors:
> disas.c: In function 'disas_print_addr_sym':
> disas.c:173:38: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'bfd_vma' {aka 'long long unsigned int'} [-Werror=format=]
> 173 | DINFO_FPRINTF(dinfo, "0x%lx <%s>", addr, symstr);
> | ^~~~~~~~~~~~ ~~~~
> | |
> | bfd_vma {aka long long unsigned int}
Provide a correct printf-fmt depending on sizeof(bfd_vma).
Ioana Ciornei [Thu, 22 Jan 2026 13:40:34 +0000 (15:40 +0200)]
bus: simple-pm-bus: Probe the Layerscape SCFG node
Make the simple-pm-bus driver probe the Layerscape SCFG dt nodes and
populate platform_device structures from its child dt nodes.
This is now needed because its child interrupt-controller - ls-extirq -
is being handled as a platform_device instead of being initialized
through the IRQCHIP_DECLARE infrastructure which impeded its parent IRQ
retrieval through the blamed commit.
Note that this does not set ONLY_BUS because that enables the
of_platform_populate() call. The extra power management operations which
are enabled by that are not required but harmless.
Fixes: 1b1f04d8271e ("of/irq: Ignore interrupt parent for nodes without interrupts") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20260122134034.3274053-3-ioana.ciornei@nxp.com
Ioana Ciornei [Thu, 22 Jan 2026 13:40:33 +0000 (15:40 +0200)]
irqchip/ls-extirq: Convert to a platform driver to make it work again
Starting with the blamed commit, the ls-extirq driver stopped working. This
is because ls-extirq, being one of the interrupt-map property abusers, does
not pass the DT checks added by the referenced commit, making it unable to
determine its interrupt parent:
Instead of reverting the referenced commit, convert the ls-extirq to a
platform driver to avoid the irqchip_init() -> of_irq_init() code path
completely.
As part of the conversion, use the managed resources APIs and
dev_err_probe() so that there is no need for a .remove() callback or for
complicated error handling.
Fixes: 1b1f04d8271e ("of/irq: Ignore interrupt parent for nodes without interrupts") Co-developed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260122134034.3274053-2-ioana.ciornei@nxp.com
Jacky Bai [Fri, 23 Jan 2026 02:51:26 +0000 (10:51 +0800)]
pmdomain: imx: gpcv2: Fix the imx8mm gpu hang due to wrong adb400 reset
On i.MX8MM, the GPUMIX, GPU2D, and GPU3D blocks share a common reset
domain. Due to this hardware limitation, powering off/on GPU2D or GPU3D
also triggers a reset of the GPUMIX domain, including its ADB400 port.
However, the ADB400 interface must always be placed into power‑down mode
before being reset.
Currently the GPUMIX and GPU2D/3D power domains rely on runtime PM to
handle dependency ordering. In some corner cases, the GPUMIX power off
sequence is skipped, leaving the ADB400 port active when GPU2D/3D reset.
This causes the GPUMIX ADB400 port to be reset while still active,
leading to unpredictable bus behavior and GPU hangs.
To avoid this, refine the power‑domain control logic so that the GPUMIX
ADB400 port is explicitly powered down and powered up as part of the GPU
power domain on/off sequence. This ensures proper ordering and prevents
incorrect ADB400 reset.
Suggested-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
bonding: fix use-after-free due to enslave fail after slave array update
Fix a use-after-free which happens due to enslave failure after the new
slave has been added to the array. Since the new slave can be used for Tx
immediately, we can use it after it has been freed by the enslave error
cleanup path which frees the allocated slave memory. Slave update array is
supposed to be called last when further enslave failures are not expected.
Move it after xdp setup to avoid any problems.
It is very easy to reproduce the problem with a simple xdp_pass prog:
ip l add bond1 type bond mode balance-xor
ip l set bond1 up
ip l set dev bond1 xdp object xdp_pass.o sec xdp_pass
ip l add dumdum type dummy
Then run in parallel:
while :; do ip l set dumdum master bond1 1>/dev/null 2>&1; done;
mausezahn bond1 -a own -b rand -A rand -B 1.1.1.1 -c 0 -t tcp "dp=1-1023, flags=syn"
Fixes: 9e2ee5c7e7c3 ("net, bonding: Add XDP support to the bonding driver") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reported-by: Chen Zhen <chenzhen126@huawei.com> Closes: https://lore.kernel.org/netdev/fae17c21-4940-5605-85b2-1d5e17342358@huawei.com/ CC: Jussi Maki <joamaki@gmail.com> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://patch.msgid.link/20260123120659.571187-1-razor@blackwall.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Gabor Juhos [Thu, 22 Jan 2026 17:20:12 +0000 (18:20 +0100)]
pmdomain: qcom: rpmpd: fix off-by-one error in clamping to the highest state
As it is indicated by the comment, the rpmpd_aggregate_corner() function
tries to clamp the state to the highest corner/level supported by the
given power domain, however the calculation of the highest state contains
an off-by-one error.
The 'max_state' member of the 'rpmpd' structure indicates the highest
corner/level, and as such it does not needs to be decremented.
Change the code to use the 'max_state' value directly to avoid the error.
Merge tag 'cpufreq-arm-fixes-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull a CPUFreq driver fix for 6.19 from Viresh Kumar:
- Add sentinel to qcom_cpufreq_ipq806x_match_list (Pei Xiao).
* tag 'cpufreq-arm-fixes-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-nvmem: add sentinel to qcom_cpufreq_ipq806x_match_list
The headphone GPIO should be set to the inverse of speaker_en.
When speakers are enabled, headphones should be disabled and vice versa.
Currently both GPIOs are set to the same value (speaker_en), causing
audio to play through both speakers and headphones simultaneously
when headphones are plugged in.
Tested on Huawei Matebook (BOD-WXX9) with ES8336 codec.
pinctrl: lpass-lpi: implement .get_direction() for the GPIO driver
GPIO controller driver should typically implement the .get_direction()
callback as GPIOLIB internals may try to use it to determine the state
of a pin. Add it for the LPASS LPI driver.
Reported-by: Abel Vesa <abelvesa@kernel.org> Cc: stable@vger.kernel.org Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # X1E CRD Tested-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Signed-off-by: Linus Walleij <linusw@kernel.org>
Robin Murphy [Mon, 26 Jan 2026 12:12:26 +0000 (12:12 +0000)]
gpio: rockchip: Stop calling pinctrl for set_direction
Marking the whole controller as sleeping due to the pinctrl calls in the
.direction_{input,output} callbacks has the unfortunate side effect that
legitimate invocations of .get and .set, which cannot themselves sleep,
in atomic context now spew WARN()s from gpiolib.
However, as Heiko points out, the driver doing this is a bit silly to
begin with, as the pinctrl .gpio_set_direction hook doesn't even care
about the direction, the hook is only used to claim the mux. And sure
enough, the .gpio_request_enable hook exists to serve this very purpose,
so switch to that and remove the problematic business entirely.
Cc: stable@vger.kernel.org Fixes: 20cf2aed89ac ("gpio: rockchip: mark the GPIO controller as sleeping") Suggested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/bddc0469f25843ca5ae0cf578ab3671435ae98a7.1769429546.git.robin.murphy@arm.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Pei Xiao [Thu, 22 Jan 2026 01:44:48 +0000 (09:44 +0800)]
cpufreq: qcom-nvmem: add sentinel to qcom_cpufreq_ipq806x_match_list
The of_device_id table is expected to be NULL-terminated. Without the
sentinel, the traversal of the array can lead to out-of-bound access,
causing undefined behavior.
This adds the missing sentinel to the qcom_cpufreq_ipq806x_match_list
array.
Fixes: 58f5d39d5ed8 ("cpufreq: qcom-nvmem: add compatible fallback for ipq806x for no SMEM") Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
nfc: llcp: Fix memleak in nfc_llcp_send_ui_frame().
syzbot reported various memory leaks related to NFC, struct
nfc_llcp_sock, sk_buff, nfc_dev, etc. [0]
The leading log hinted that nfc_llcp_send_ui_frame() failed
to allocate skb due to sock_error(sk) being -ENXIO.
ENXIO is set by nfc_llcp_socket_release() when struct
nfc_llcp_local is destroyed by local_cleanup().
The problem is that there is no synchronisation between
nfc_llcp_send_ui_frame() and local_cleanup(), and skb
could be put into local->tx_queue after it was purged in
local_cleanup():
Vivian Wang [Fri, 23 Jan 2026 03:52:23 +0000 (11:52 +0800)]
net: spacemit: Check for netif_carrier_ok() in emac_stats_update()
Some PHYs stop the refclk for power saving, usually while link down.
This causes reading stats to time out.
Therefore, in emac_stats_update(), also don't update and reschedule if
!netif_carrier_ok(). But that means we could be missing later updates if
the link comes back up, so also reschedule when link up is detected in
emac_adjust_link().
While we're at it, improve the comments and error message prints around
this to reflect the better understanding of how this could happen.
Hopefully if this happens again on new hardware, these comments will
direct towards a solution.
Closes: https://lore.kernel.org/r/20260119141620.1318102-1-amadeus@jmu.edu.cn/ Fixes: bfec6d7f2001 ("net: spacemit: Add K1 Ethernet MAC") Co-developed-by: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn> Link: https://patch.msgid.link/20260123-k1-ethernet-clarify-stat-timeout-v3-1-93b9df627e87@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kery Qi [Fri, 23 Jan 2026 21:10:31 +0000 (05:10 +0800)]
rocker: fix memory leak in rocker_world_port_post_fini()
In rocker_world_port_pre_init(), rocker_port->wpriv is allocated with
kzalloc(wops->port_priv_size, GFP_KERNEL). However, in
rocker_world_port_post_fini(), the memory is only freed when
wops->port_post_fini callback is set:
if (!wops->port_post_fini)
return;
wops->port_post_fini(rocker_port);
kfree(rocker_port->wpriv);
Since rocker_ofdpa_ops does not implement port_post_fini callback
(it is NULL), the wpriv memory allocated for each port is never freed
when ports are removed. This leads to a memory leak of
sizeof(struct ofdpa_port) bytes per port on every device removal.
Fix this by always calling kfree(rocker_port->wpriv) regardless of
whether the port_post_fini callback exists.
Fixes: e420114eef4a ("rocker: introduce worlds infrastructure") Signed-off-by: Kery Qi <qikeyu2017@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260123211030.2109-2-qikeyu2017@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao [Thu, 22 Jan 2026 10:39:36 +0000 (02:39 -0800)]
vmcoreinfo: make hwerr_data visible for debugging
If the kernel is compiled with LTO, hwerr_data symbol might be lost, and
vmcoreinfo doesn't have it dumped. This is currently seen in some
production kernels with LTO enabled.
Remove the static qualifier from hwerr_data so that the information is
still preserved when the kernel is built with LTO. Making hwerr_data a
global symbol ensures its debug info survives the LTO link process and
appears in kallsyms. Also document it, so it doesn't get removed in
the future as suggested by akpm.
Link: https://lkml.kernel.org/r/20260122-fix_vmcoreinfo-v2-1-2d6311f9e36c@debian.org Fixes: 3fa805c37dd4 ("vmcoreinfo: track and log recoverable hardware errors") Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Omar Sandoval <osandov@osandov.com> Cc: Shuai Xue <xueshuai@linux.alibaba.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Zhiquan Li <zhiquan1.li@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Brost [Fri, 16 Jan 2026 11:10:16 +0000 (12:10 +0100)]
mm/zone_device: reinitialize large zone device private folios
Reinitialize metadata for large zone device private folios in
zone_device_page_init prior to creating a higher-order zone device private
folio. This step is necessary when the folio's order changes dynamically
between zone_device_page_init calls to avoid building a corrupt folio. As
part of the metadata reinitialization, the dev_pagemap must be passed in
from the caller because the pgmap stored in the folio page may have been
overwritten with a compound head.
Without this fix, individual pages could have invalid pgmap fields and
flags (with PG_locked being notably problematic) due to prior different
order allocations, which can, and will, result in kernel crashes.
Link: https://lkml.kernel.org/r/20260116111325.1736137-2-francois.dugast@intel.com Fixes: d245f9b4ab80 ("mm/zone_device: support large zone device private folios") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Francois Dugast <francois.dugast@intel.com> Acked-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Balbir Singh <balbirs@nvidia.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <ziy@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Christophe Leroy (CS GROUP)" <chleroy@kernel.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Simona Vetter <simona@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Lyude Paul <lyude@redhat.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: David Hildenbrand <david@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Leon Romanovsky <leon@kernel.org> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Waiman Long [Thu, 22 Jan 2026 18:43:43 +0000 (13:43 -0500)]
mm/mm_init: don't cond_resched() in deferred_init_memmap_chunk() if called from deferred_grow_zone()
Commit 3acb913c9d5b ("mm/mm_init: use deferred_init_memmap_chunk() in
deferred_grow_zone()") made deferred_grow_zone() call
deferred_init_memmap_chunk() within a pgdat_resize_lock() critical section
with irqs disabled. It did check for irqs_disabled() in
deferred_init_memmap_chunk() to avoid calling cond_resched(). For a
PREEMPT_RT kernel build, however, spin_lock_irqsave() does not disable
interrupt but rcu_read_lock() is called. This leads to the following bug
report.
Fix it adding a new argument to deferred_init_memmap_chunk() to explicitly
tell it if cond_resched() is allowed or not instead of relying on some
current state information which may vary depending on the exact kernel
configuration options that are enabled.
Link: https://lkml.kernel.org/r/20260122184343.546627-1-longman@redhat.com Fixes: 3acb913c9d5b ("mm/mm_init: use deferred_init_memmap_chunk() in deferred_grow_zone()") Signed-off-by: Waiman Long <longman@redhat.com> Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: David Hildenbrand <david@kernel.org> Cc: "Paul E . McKenney" <paulmck@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: <stable@vger.kernrl.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pimyn Girgis [Tue, 20 Jan 2026 16:15:10 +0000 (17:15 +0100)]
mm/kfence: randomize the freelist on initialization
Randomize the KFENCE freelist during pool initialization to make
allocation patterns less predictable. This is achieved by shuffling the
order in which metadata objects are added to the freelist using
get_random_u32_below().
Additionally, ensure the error path correctly calculates the address range
to be reset if initialization fails, as the address increment logic has
been moved to a separate loop.
Ran Xiaokai [Thu, 22 Jan 2026 13:27:40 +0000 (13:27 +0000)]
kho: init alloc tags when restoring pages from reserved memory
Memblock pages (including reserved memory) should have their allocation
tags initialized to CODETAG_EMPTY via clear_page_tag_ref() before being
released to the page allocator. When kho restores pages through
kho_restore_page(), missing this call causes mismatched
allocation/deallocation tracking and below warning message:
alloc_tag was not set
WARNING: include/linux/alloc_tag.h:164 at ___free_pages+0xb8/0x260, CPU#1: swapper/0/1
RIP: 0010:___free_pages+0xb8/0x260
kho_restore_vmalloc+0x187/0x2e0
kho_test_init+0x3c4/0xa30
do_one_initcall+0x62/0x2b0
kernel_init_freeable+0x25b/0x480
kernel_init+0x1a/0x1c0
ret_from_fork+0x2d1/0x360
Add missing clear_page_tag_ref() annotation in kho_restore_page() to
fix this.
Link: https://lkml.kernel.org/r/20260122132740.176468-1-ranxiaokai627@163.com Fixes: fc33e4b44b27 ("kexec: enable KHO support for memory preservation") Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn> Reviewed-by: Pratyush Yadav <pratyush@kernel.org> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Alexander Graf <graf@amazon.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm: memfd_luo: use memfd_alloc_file() instead of shmem_file_setup()
When restoring a memfd, the file is created using shmem_file_setup().
While memfd creation also calls this function to get the file, it also
does other things:
1. The O_LARGEFILE flag is set on the file. If this is not done,
writes on the memfd exceeding 2 GiB fail.
2. FMODE_LSEEK, FMODE_PREAD, and FMODE_PWRITE are set on the file.
This makes sure the file is seekable and can be used with pread() and
pwrite().
3. Initializes the security field for the inode and makes sure that
inode creation is permitted by the security module.
Currently, none of those things are done. This means writes above 2 GiB
fail, pread(), and pwrite() fail, and so on. lseek() happens to work
because file_init_path() sets it because shmem defines fop->llseek.
Fix this by using memfd_alloc_file() to get the file to make sure the
initialization sequence for normal and preserved memfd is the same.
This series contains a couple of fixes for memfd preservation using LUO.
This patch (of 3):
The Live Update Orchestrator's (LUO) memfd preservation works by
preserving all the folios of a memfd, re-creating an empty memfd on the
next boot, and then inserting back the preserved folios.
Currently it creates the file by directly calling shmem_file_setup().
This leaves out other work done by alloc_file() like setting up the file
mode, flags, or calling the security hooks.
Export alloc_file() to let memfd_luo use it. Rename it to
memfd_alloc_file() since it is no longer private and thus needs a
subsystem prefix.
Jan Kara [Wed, 21 Jan 2026 11:27:30 +0000 (12:27 +0100)]
flex_proportions: make fprop_new_period() hardirq safe
Bernd has reported a lockdep splat from flexible proportions code that is
essentially complaining about the following race:
<timer fires>
run_timer_softirq - we are in softirq context
call_timer_fn
writeout_period
fprop_new_period
write_seqcount_begin(&p->sequence);
<hardirq is raised>
...
blk_mq_end_request()
blk_update_request()
ext4_end_bio()
folio_end_writeback()
__wb_writeout_add()
__fprop_add_percpu_max()
if (unlikely(max_frac < FPROP_FRAC_BASE)) {
fprop_fraction_percpu()
seq = read_seqcount_begin(&p->sequence);
- sees odd sequence so loops indefinitely
Note that a deadlock like this is only possible if the bdi has configured
maximum fraction of writeout throughput which is very rare in general but
frequent for example for FUSE bdis. To fix this problem we have to make
sure write section of the sequence counter is irqsafe.
Link: https://lkml.kernel.org/r/20260121112729.24463-2-jack@suse.cz Fixes: a91befde3503 ("lib/flex_proportions.c: remove local_irq_ops in fprop_new_period()") Signed-off-by: Jan Kara <jack@suse.cz> Reported-by: Bernd Schubert <bernd@bsbernd.com> Link: https://lore.kernel.org/all/9b845a47-9aee-43dd-99bc-1a82bea00442@bsbernd.com/ Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Joanne Koong <joannelkoong@gmail.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Map my address <adeep@lexina.in> to new personal address <v@baodeep.com>
Old domain lexina.in will no longer be accessible due to registration
expiration.
Jane Chu [Tue, 20 Jan 2026 23:22:34 +0000 (16:22 -0700)]
mm/memory-failure: teach kill_accessing_process to accept hugetlb tail page pfn
When a hugetlb folio is being poisoned again, try_memory_failure_hugetlb()
passed head pfn to kill_accessing_process(), that is not right. The
precise pfn of the poisoned page should be used in order to determine the
precise vaddr as the SIGBUS payload.
This issue has already been taken care of in the normal path, that is,
hwpoison_user_mappings(), see [1][2]. Further more, for [3] to work
correctly in the hugetlb repoisoning case, it's essential to inform VM the
precise poisoned page, not the head page.
Link: https://lkml.kernel.org/r/20260120232234.3462258-2-jane.chu@oracle.com Signed-off-by: Jane Chu <jane.chu@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Acked-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Chris Mason <clm@meta.com> Cc: David Hildenbrand <david@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Suren Baghdasaryan <surenb@google.com> Cc: William Roche <william.roche@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jane Chu [Tue, 20 Jan 2026 23:22:33 +0000 (16:22 -0700)]
mm/memory-failure: fix missing ->mf_stats count in hugetlb poison
When a newly poisoned subpage ends up in an already poisoned hugetlb
folio, 'num_poisoned_pages' is incremented, but the per node ->mf_stats is
not. Fix the inconsistency by designating action_result() to update them
both.
While at it, define __get_huge_page_for_hwpoison() return values in terms
of symbol names for better readibility. Also rename
folio_set_hugetlb_hwpoison() to hugetlb_update_hwpoison() since the
function does more than the conventional bit setting and the fact three
possible return values are expected.
Link: https://lkml.kernel.org/r/20260120232234.3462258-1-jane.chu@oracle.com Fixes: 18f41fa616ee ("mm: memory-failure: bump memory failure stats to pglist_data") Signed-off-by: Jane Chu <jane.chu@oracle.com> Acked-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Chris Mason <clm@meta.com> Cc: David Hildenbrand <david@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Suren Baghdasaryan <surenb@google.com> Cc: William Roche <william.roche@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
robin.kuo [Fri, 16 Jan 2026 06:25:00 +0000 (14:25 +0800)]
mm, swap: restore swap_space attr aviod kernel panic
commit 8b47299a411a ("mm, swap: mark swap address space ro and add context
debug check") made the swap address space read-only. It may lead to
kernel panic if arch_prepare_to_swap returns a failure under heavy memory
pressure as follows,
Restore swap address space as not ro to avoid the panic.
Link: https://lkml.kernel.org/r/20260116062535.306453-2-robin.kuo@mediatek.com Fixes: 8b47299a411a ("mm, swap: mark swap address space ro and add context debug check") Signed-off-by: robin.kuo <robin.kuo@mediatek.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: andrew.yang <andrew.yang@mediatek.com> Cc: AngeloGiaocchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <baohua@kernel.org> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Chris Li <chrisl@kernel.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kairui Song <ryncsn@gmail.com> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Mathias Brugger <matthias.bgg@gmail.com> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Qun-wei Lin <Qun-wei.Lin@mediatek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrey Ryabinin [Tue, 13 Jan 2026 19:15:15 +0000 (20:15 +0100)]
mm/kasan: fix KASAN poisoning in vrealloc()
A KASAN warning can be triggered when vrealloc() changes the requested
size to a value that is not aligned to KASAN_GRANULE_SIZE.
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1 at mm/kasan/shadow.c:174 kasan_unpoison+0x40/0x48
...
pc : kasan_unpoison+0x40/0x48
lr : __kasan_unpoison_vmalloc+0x40/0x68
Call trace:
kasan_unpoison+0x40/0x48 (P)
vrealloc_node_align_noprof+0x200/0x320
bpf_patch_insn_data+0x90/0x2f0
convert_ctx_accesses+0x8c0/0x1158
bpf_check+0x1488/0x1900
bpf_prog_load+0xd20/0x1258
__sys_bpf+0x96c/0xdf0
__arm64_sys_bpf+0x50/0xa0
invoke_syscall+0x90/0x160
Introduce a dedicated kasan_vrealloc() helper that centralizes KASAN
handling for vmalloc reallocations. The helper accounts for KASAN granule
alignment when growing or shrinking an allocation and ensures that partial
granules are handled correctly.
Use this helper from vrealloc_node_align_noprof() to fix poisoning logic.
Kairui Song [Mon, 19 Jan 2026 16:11:21 +0000 (00:11 +0800)]
mm/shmem, swap: fix race of truncate and swap entry split
The helper for shmem swap freeing is not handling the order of swap
entries correctly. It uses xa_cmpxchg_irq to erase the swap entry, but it
gets the entry order before that using xa_get_order without lock
protection, and it may get an outdated order value if the entry is split
or changed in other ways after the xa_get_order and before the
xa_cmpxchg_irq.
And besides, the order could grow and be larger than expected, and cause
truncation to erase data beyond the end border. For example, if the
target entry and following entries are swapped in or freed, then a large
folio was added in place and swapped out, using the same entry, the
xa_cmpxchg_irq will still succeed, it's very unlikely to happen though.
To fix that, open code the Xarray cmpxchg and put the order retrieval and
value checking in the same critical section. Also, ensure the order won't
exceed the end border, skip it if the entry goes across the border.
Skipping large swap entries crosses the end border is safe here. Shmem
truncate iterates the range twice, in the first iteration,
find_lock_entries already filtered such entries, and shmem will swapin the
entries that cross the end border and partially truncate the folio (split
the folio or at least zero part of it). So in the second loop here, if we
see a swap entry that crosses the end order, it must at least have its
content erased already.
I observed random swapoff hangs and kernel panics when stress testing
ZSWAP with shmem. After applying this patch, all problems are gone.
Link: https://lkml.kernel.org/r/20260120-shmem-swap-fix-v3-1-3d33ebfbc057@tencent.com Fixes: 809bc86517cc ("mm: shmem: support large folio swap out") Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Chris Li <chrisl@kernel.org> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <baohua@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds [Mon, 26 Jan 2026 17:30:48 +0000 (09:30 -0800)]
Merge tag 'vfs-6.19-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix the the buggy conversion of fuse_reverse_inval_entry() introduced
during the creation rework
- Disallow nfs delegation requests for directories by setting
simple_nosetlease()
- Require an opt-in for getting readdir flag bits outside of S_DT_MASK
set in d_type
- Fix scheduling delayed writeback work by only scheduling when the
dirty time expiry interval is non-zero and cancel the delayed work if
the interval is set to zero
- Use rounded_jiffies_interval for dirty time work
- Check the return value of sb_set_blocksize() for romfs
- Wait for batched folios to be stable in __iomap_get_folio()
- Use private naming for fuse hash size
- Fix the stale dentry cleanup to prevent a race that causes a UAF
* tag 'vfs-6.19-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: document d_dispose_if_unused()
fuse: shrink once after all buckets have been scanned
fuse: clean up fuse_dentry_tree_work()
fuse: add need_resched() before unlocking bucket
fuse: make sure dentry is evicted if stale
fuse: fix race when disposing stale dentries
fuse: use private naming for fuse hash size
writeback: use round_jiffies_relative for dirtytime_work
iomap: wait for batched folios to be stable in __iomap_get_folio
romfs: check sb_set_blocksize() return value
docs: clarify that dirtytime_expire_seconds=0 disables writeback
writeback: fix 100% CPU usage when dirtytime_expire_interval is 0
readdir: require opt-in for d_type flags
vboxsf: don't allow delegations to be set on directories
ceph: don't allow delegations to be set on directories
gfs2: don't allow delegations to be set on directories
9p: don't allow delegations to be set on directories
smb/client: properly disallow delegations on directories
nfs: properly disallow delegation requests on directories
fuse: fix conversion of fuse_reverse_inval_entry() to start_removing()
Carlos Llamas [Fri, 23 Jan 2026 17:57:02 +0000 (17:57 +0000)]
binder: fix BR_FROZEN_REPLY error log
The error logging for failed transactions is misleading as it always
reports "dead process or thread" even when the target is actually
frozen. Additionally, the pid and tid are reversed which can further
confuse debugging efforts. Fix both issues.
Cc: stable@kernel.org Cc: Steven Moreland <smoreland@google.com> Fixes: a15dac8b2286 ("binder: additional transaction error logs") Signed-off-by: Carlos Llamas <cmllamas@google.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://patch.msgid.link/20260123175702.2154348-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alice Ryhl [Fri, 23 Jan 2026 16:23:56 +0000 (16:23 +0000)]
rust_binder: add additional alignment checks
This adds some alignment checks to match C Binder more closely. This
causes the driver to reject more transactions. I don't think any of the
transactions in question are harmful, but it's still a bug because it's
the wrong uapi to accept them.
The cases where usize is changed for u64, it will affect only 32-bit
kernels.
Carlos Llamas [Thu, 22 Jan 2026 18:02:02 +0000 (18:02 +0000)]
binder: fix UAF in binder_netlink_report()
Oneway transactions sent to frozen targets via binder_proc_transaction()
return a BR_TRANSACTION_PENDING_FROZEN error but they are still treated
as successful since the target is expected to thaw at some point. It is
then not safe to access 't' after BR_TRANSACTION_PENDING_FROZEN errors
as the transaction could have been consumed by the now thawed target.
This is the case for binder_netlink_report() which derreferences 't'
after a pending frozen error, as pointed out by the following KASAN
report:
==================================================================
BUG: KASAN: slab-use-after-free in binder_netlink_report.isra.0+0x694/0x6c8
Read of size 8 at addr ffff00000f98ba38 by task binder-util/522
Allocated by task 522:
__kmalloc_cache_noprof+0x17c/0x50c
binder_transaction+0x584/0x79b8
binder_thread_write+0xab4/0x4440
binder_ioctl+0x1fd4/0x2940
[...]
Freed by task 488:
kfree+0x1d0/0x420
binder_free_transaction+0x150/0x234
binder_thread_read+0x2d08/0x3ce4
binder_ioctl+0x488/0x2940
[...]
==================================================================
Instead, make a transaction copy so the data can be safely accessed by
binder_netlink_report() after a pending frozen error. While here, add a
comment about not using t->buffer in binder_netlink_report().
Cc: stable@vger.kernel.org Fixes: 63740349eba7 ("binder: introduce transaction reports via netlink") Signed-off-by: Carlos Llamas <cmllamas@google.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://patch.msgid.link/20260122180203.1502637-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alice Ryhl [Mon, 29 Dec 2025 15:38:14 +0000 (15:38 +0000)]
rust_binder: correctly handle FDA objects of length zero
Fix a bug where an empty FDA (fd array) object with 0 fds would cause an
out-of-bounds error. The previous implementation used `skip == 0` to
mean "this is a pointer fixup", but 0 is also the correct skip length
for an empty FDA. If the FDA is at the end of the buffer, then this
results in an attempt to write 8-bytes out of bounds. This is caught and
results in an EINVAL error being returned to userspace.
The pattern of using `skip == 0` as a special value originates from the
C-implementation of Binder. As part of fixing this bug, this pattern is
replaced with a Rust enum.
I considered the alternate option of not pushing a fixup when the length
is zero, but I think it's cleaner to just get rid of the zero-is-special
stuff.
The root cause of this bug was diagnosed by Gemini CLI on first try. I
used the following prompt:
> There appears to be a bug in @drivers/android/binder/thread.rs where
> the Fixups oob bug is triggered with 316 304 316 324. This implies
> that we somehow ended up with a fixup where buffer A has a pointer to
> buffer B, but the pointer is located at an index in buffer A that is
> out of bounds. Please investigate the code to find the bug. You may
> compare with @drivers/android/binder.c that implements this correctly.
The PSS telemetry info parsing incorrectly applies
TELEM_INFO_SRAMEVTS_MASK when extracting event register
count from firmware response. This reads bits 15-8 instead
of the correct bits 7-0, causing misdetection of hardware
capabilities.
The IOSS path correctly uses TELEM_INFO_NENABLES_MASK for
register count. Apply the same mask to PSS parsing for
consistency.
platform/x86: intel_telemetry: Fix swapped arrays in PSS output
The LTR blocking statistics and wakeup event counters are incorrectly
cross-referenced during debugfs output rendering. The code populates
pss_ltr_blkd[] with LTR blocking data and pss_s0ix_wakeup[] with wakeup
data, but the display loops reference the wrong arrays.
This causes the "LTR Blocking Status" section to print wakeup events
and the "Wakes Status" section to print LTR blockers, misleading power
management analysis and S0ix residency debugging.
Fix by aligning array usage with the intended output section labels.
platform/x86: panasonic-laptop: Fix sysfs group leak in error path
The acpi_pcc_hotkey_add() error path leaks sysfs group pcc_attr_group
if platform_device_register_simple() fails for the "panasonic" platform
device.
Address this by making it call sysfs_remove_group() in that case for
the group in question.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/3398370.44csPzL39Z@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Nitin Gote [Tue, 20 Jan 2026 05:47:25 +0000 (11:17 +0530)]
drm/xe: derive mem copy capability from graphics version
Drop .has_mem_copy_instr from the platform descriptors and set it
in xe_info_init() after handle_gmdid() populates graphics_verx100.
Centralizing the GRAPHICS_VER(xe) >= 20 check keeps MEM_COPY enabled
on Xe2+ and removes redundant per-platform plumbing.
Bspec: 57561
Fixes: 1e12dbae9d72 ("drm/xe/migrate: support MEM_COPY instruction") Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Suggested-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Nitin Gote <nitin.r.gote@intel.com> Link: https://patch.msgid.link/20260120054724.1982608-2-nitin.r.gote@intel.com Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit 6ef02656c3222b1e12032a40d644ed56806b14fc) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Shuicheng Lin [Thu, 22 Jan 2026 21:40:54 +0000 (21:40 +0000)]
drm/xe: Skip address copy for sync-only execs
For parallel exec queues, xe_exec_ioctl() copied the batch buffer address
array from userspace without checking num_batch_buffer.
If user creates a sync-only exec that doesn't use the address field, the
exec will fail with -EFAULT.
Add num_batch_buffer check to skip the copy, and the exec could be executed
successfully.
Here is the sync-only exec:
struct drm_xe_exec exec = {
.extensions = 0,
.exec_queue_id = qid,
.num_syncs = 1,
.syncs = (uintptr_t)&sync,
.address = 0, /* ignored for sync-only */
.num_batch_buffer = 0, /* sync-only */
};
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260122214053.3189366-2-shuicheng.lin@intel.com
(cherry picked from commit 4761791c1e736273d612ff564f318bfbbb04fa4e) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Tvrtko Ursulin [Fri, 23 Jan 2026 14:15:40 +0000 (14:15 +0000)]
drm: Do not allow userspace to trigger kernel warnings in drm_gem_change_handle_ioctl()
Since GEM bo handles are u32 in the uapi and the internal implementation
uses idr_alloc() which uses int ranges, passing a new handle larger than
INT_MAX trivially triggers a kernel warning:
idr_alloc():
...
if (WARN_ON_ONCE(start < 0))
return -EINVAL;
...
Fix it by rejecting new handles above INT_MAX and at the same time make
the end limit calculation more obvious by moving into int domain.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reported-by: Zhi Wang <wangzhi@stu.xidian.edu.cn> Fixes: 53096728b891 ("drm: Add DRM prime interface to reassign GEM handle") Cc: David Francis <David.Francis@amd.com> Cc: Felix Kuehling <felix.kuehling@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: <stable@vger.kernel.org> # v6.18+ Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Link: https://lore.kernel.org/r/20260123141540.76540-1-tvrtko.ursulin@igalia.com
Guodong Xu [Thu, 22 Jan 2026 09:43:42 +0000 (17:43 +0800)]
regulator: spacemit-p1: Fix n_voltages for BUCK and LDO regulators
Higher voltage settings were unusable due to incorrect n_voltages values
causing registration failures. For example, setting aldo4 to 3.3V failed
with -EINVAL because the required selector (123) exceeded the allowed
range (n_voltages=117).
Fix by aligning n_voltages with the hardware register widths per the P1
datasheet [1]:
- BUCK: 255 (was 254), allows selectors 0-254, selector 255 is reserved
- LDO: 128 (was 117), allows selectors 0-127, selectors 0-10 are for
suspend mode, valid operational range is 11-127
This enables the full voltage range supported by the hardware.
Zhang Heng [Mon, 26 Jan 2026 07:35:07 +0000 (15:35 +0800)]
ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machine
The HP EliteBook 630 G11 (103c:8c8f) is using ALC236 codec which used 0x02
to control mute LED and 0x01 to control micmute LED. Therefore, add a quirk
to make it works.
Andreas Schwab [Mon, 26 Jan 2026 04:09:04 +0000 (21:09 -0700)]
errata/sifive: remove unreliable warn_miss_errata
When both the SiFive and MIPS errata are enabled then
sifive_errata_patch_func emits a wrong and misleading warning claiming
that the SiFive errata haven't been applied. This happens because
sifive_errata_patch_func is being called twice, once for the kernel image
and once for the vdso image. The vdso image has alternative entries
for the MIPS errata, but none for the SiFive errata.
Austin Kim [Mon, 26 Jan 2026 04:08:59 +0000 (21:08 -0700)]
riscv: fix minor typo in syscall.h comment
Some developers may be confused because RISC-V does not have
a register named r0. Also, orig_r0 is not available in pt_regs structure,
which is specific to riscv. So we had better fix this minor typo.
Paul Walmsley [Mon, 26 Jan 2026 04:08:53 +0000 (21:08 -0700)]
riscv: signal: fix some warnings reported by sparse
Clean up a few warnings reported by sparse in
arch/riscv/kernel/signal.c. These come from code that was added
recently; they were missed when I initially reviewed the patch.
Fixes: 818d78ba1b3f ("riscv: signal: abstract header saving for setup_sigcontext") Cc: Andy Chiu <andybnac@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202601171848.ydLTJYrz-lkp@intel.com/
[pjw@kernel.org: updated to apply] Signed-off-by: Paul Walmsley <pjw@kernel.org>
Shivam Kalra [Fri, 23 Jan 2026 13:21:13 +0000 (18:51 +0530)]
rust: num: bounded: clean __new documentation and comments
Following commit 3a1ec424dd9c ("rust: num: bounded: mark __new as
unsafe"), remove the redundant paragraph in the documentation of __new now
that the Safety section explicitly covers the requirement.
Additionally, add an INVARIANT comment inside the function body where
the Bounded instance is actually constructed to document that the type
invariant is upheld.
Shawn Guo [Wed, 21 Jan 2026 14:20:47 +0000 (22:20 +0800)]
MAINTAINERS: Replace Shawn with Frank as i.MX platform maintainer
Shawn is no longer interested in maintaining i.MX platform, and would like
to step down. On the other hand, Frank seems to be the best successor
for this role.
- He has been one of the most outstanding contributors to i.MX platform
in the recent years.
- He has been actively working as a co-maintainer reviewing i.MX
patches and keep the platform support in good shape.
- He works for NXP and could be the bridge and coordinator between
NXP internal developers and community contributors.
Acked-by: Peng Fan <peng.fan@nxp.com> Acked-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
SeungJong Ha [Fri, 23 Jan 2026 13:18:44 +0000 (13:18 +0000)]
scripts: generate_rust_analyzer: fix resolution of #[pin_data] macros
Currently, rust-analyzer fails to properly resolve structs annotated with
`#[pin_data]`. This prevents IDE features like "Go to Definition" from
working correctly for those structs.
Add the missing configuration to `generate_rust_analyzer.py` to ensure
the `pin-init` crate macros are handled correctly.
Signed-off-by: SeungJong Ha <engineer.jjhama@gmail.com> Fixes: d7659acca7a3 ("rust: add pin-init crate build infrastructure") Cc: stable@vger.kernel.org Tested-by: Tamir Duberstein <tamird@kernel.org> Acked-by: Tamir Duberstein <tamird@kernel.org> Acked-by: Gary Guo <gary@garyguo.net> Reviewed-by: Jesung Yang <y.j3ms.n@gmail.com> Link: https://patch.msgid.link/20260123-fix-pin-init-crate-dependecies-v2-1-bb1c2500e54c@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Miguel Ojeda [Sat, 24 Jan 2026 16:09:48 +0000 (17:09 +0100)]
drm/tyr: depend on `COMMON_CLK` to fix build error
Tyr needs `CONFIG_COMMON_CLK` to build:
error[E0432]: unresolved import `kernel::clk::Clk`
--> drivers/gpu/drm/tyr/driver.rs:3:5
|
3 | use kernel::clk::Clk;
| ^^^^^^^^^^^^^^^^ no `Clk` in `clk`
error[E0432]: unresolved import `kernel::clk::OptionalClk`
--> drivers/gpu/drm/tyr/driver.rs:4:5
|
4 | use kernel::clk::OptionalClk;
| ^^^^^^^^^^^^^^^^^^^^^^^^ no `OptionalClk` in `clk`
Thus add the dependency to fix it.
Fixes: cf4fd52e3236 ("rust: drm: Introduce the Tyr driver for Arm Mali GPUs") Cc: stable@vger.kernel.org Acked-by: Alice Ryhl <aliceryhl@google.com> Link: https://patch.msgid.link/20260124160948.67508-1-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Miguel Ojeda [Fri, 23 Jan 2026 23:34:32 +0000 (00:34 +0100)]
rust: sync: atomic: Provide stub for `rusttest` 32-bit hosts
For arm32, on a x86_64 builder, running the `rusttest` target yields:
error[E0080]: evaluation of constant value failed
--> rust/kernel/static_assert.rs:37:23
|
37 | const _: () = ::core::assert!($condition $(,$arg)?);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ the evaluated program panicked at 'assertion failed: size_of::<isize>() == size_of::<isize_atomic_repr>()', rust/kernel/sync/atomic/predefine.rs:68:1
|
::: rust/kernel/sync/atomic/predefine.rs:68:1
|
68 | static_assert!(size_of::<isize>() == size_of::<isize_atomic_repr>());
| -------------------------------------------------------------------- in this macro invocation
|
= note: this error originates in the macro `::core::assert` which comes from the expansion of the macro `static_assert` (in Nightly builds, run with -Z macro-backtrace for more info)
The reason is that `rusttest` runs on the host, so for e.g. a x86_64
builder `isize` is 64 bits but it is not a `CONFIG_64BIT` build.
Fix it by providing a stub for `rusttest` as usual.
Reported by the following Smatch static checker warning:
drivers/net/dsa/yt921x.c:702 yt921x_read_mib()
warn: was expecting a 64 bit value instead of '(~0)'
Fixes: 186623f4aa72 ("net: dsa: yt921x: Add support for Motorcomm YT921x") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/netdev/aPsjYKQMzpY0nSXm@stanley.mountain/ Suggested-by: David Laight <david.laight.linux@gmail.com> Signed-off-by: David Yang <mmyangfl@gmail.com> Link: https://patch.msgid.link/20260122170512.2713738-1-mmyangfl@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zeng Chi [Fri, 23 Jan 2026 08:57:49 +0000 (16:57 +0800)]
net/mlx5: Fix return type mismatch in mlx5_esw_vport_vhca_id()
The function mlx5_esw_vport_vhca_id() is declared to return bool,
but returns -EOPNOTSUPP (-45), which is an int error code. This
causes a signedness bug as reported by smatch.
This patch fixes this smatch report:
drivers/net/ethernet/mellanox/mlx5/core/eswitch.h:981 mlx5_esw_vport_vhca_id()
warn: signedness bug returning '(-45)'
Fixes: 1baf30426553 ("net/mlx5: E-Switch, Set/Query hca cap via vhca id") Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Zeng Chi <zengchi@kylinos.cn> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20260123085749.1401969-1-zeng_chi911@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kery Qi [Thu, 22 Jan 2026 17:04:01 +0000 (01:04 +0800)]
net: wwan: t7xx: fix potential skb->frags overflow in RX path
When receiving data in the DPMAIF RX path,
the t7xx_dpmaif_set_frag_to_skb() function adds
page fragments to an skb without checking if the number of
fragments has exceeded MAX_SKB_FRAGS. This could lead to a buffer overflow
in skb_shinfo(skb)->frags[] array, corrupting adjacent memory and
potentially causing kernel crashes or other undefined behavior.
This issue was identified through static code analysis by comparing with a
similar vulnerability fixed in the mt76 driver commit b102f0c522cf ("mt76:
fix array overflow on receiving too many fragments for a packet").
The vulnerability could be triggered if the modem firmware sends packets
with excessive fragments. While under normal protocol conditions (MTU 3080
bytes, BAT buffer 3584 bytes),
a single packet should not require additional
fragments, the kernel should not blindly trust firmware behavior.
Malicious, buggy, or compromised firmware could potentially craft packets
with more fragments than the kernel expects.
Fix this by adding a bounds check before calling skb_add_rx_frag() to
ensure nr_frags does not exceed MAX_SKB_FRAGS.
The check must be performed before unmapping to avoid a page leak
and double DMA unmap during device teardown.
ipv6: use the right ifindex when replying to icmpv6 from localhost
When replying to a ICMPv6 echo request that comes from localhost address
the right output ifindex is 1 (lo) and not rt6i_idev dev index. Use the
skb device ifindex instead. This fixes pinging to a local address from
localhost source address.
$ ping6 -I ::1 2001:1:1::2 -c 3
PING 2001:1:1::2 (2001:1:1::2) from ::1 : 56 data bytes
64 bytes from 2001:1:1::2: icmp_seq=1 ttl=64 time=0.037 ms
64 bytes from 2001:1:1::2: icmp_seq=2 ttl=64 time=0.069 ms
64 bytes from 2001:1:1::2: icmp_seq=3 ttl=64 time=0.122 ms
2001:1:1::2 ping statistics
3 packets transmitted, 3 received, 0% packet loss, time 2032ms
rtt min/avg/max/mdev = 0.037/0.076/0.122/0.035 ms
Fixes: 1b70d792cf67 ("ipv6: Use rt6i_idev index for echo replies to a local address") Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20260121194409.6749-1-fmancera@suse.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zilin Guan [Fri, 23 Jan 2026 06:57:16 +0000 (06:57 +0000)]
net: mvpp2: cls: Fix memory leak in mvpp2_ethtool_cls_rule_ins()
In mvpp2_ethtool_cls_rule_ins(), the ethtool_rule is allocated by
ethtool_rx_flow_rule_create(). If the subsequent conversion to flow
type fails, the function jumps to the clean_rule label.
However, the clean_rule label only frees efs, skipping the cleanup
of ethtool_rule, which leads to a memory leak.
Fix this by jumping to the clean_eth_rule label, which properly calls
ethtool_rx_flow_rule_destroy() before freeing efs.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: f4f1ba18195d ("net: mvpp2: cls: Report an error for unsupported flow types") Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260123065716.2248324-1-zilin@seu.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Fri, 23 Jan 2026 16:16:34 +0000 (16:16 +0000)]
sfc: fix deadlock in RSS config read
Since cited commit, core locks the net_device's rss_lock when handling
ethtool -x command, so driver's implementation should not lock it
again. Remove the latter.
Fixes: 040cef30b5e6 ("net: ethtool: move get_rxfh callback under the rss_lock") Reported-by: Damir Mansurov <damir.mansurov@oktetlabs.ru> Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1126015 Suggested-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/20260123161634.1215006-1-edward.cree@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Sun, 25 Jan 2026 20:06:15 +0000 (12:06 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Only one core change, the rest are drivers.
The core change reorders some state operations in the error handler to
try to prevent missed wake ups of the error handler (which can halt
error processing and effectively freeze the entire system)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Sanitize payload size to prevent member overflow
scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count()
scsi: target: iscsi: Fix use-after-free in iscsit_dec_conn_usage_count()
scsi: core: Wake up the error handler when final completions race against each other
scsi: storvsc: Process unsupported MODE_SENSE_10
scsi: xen: scsiback: Fix potential memory leak in scsiback_remove()
Linus Torvalds [Sun, 25 Jan 2026 18:06:23 +0000 (10:06 -0800)]
Merge tag 'keys-trusted-next-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull keys fix from Jarkko Sakkinen.
* tag 'keys-trusted-next-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
keys/trusted_keys: fix handle passed to tpm_buf_append_name during unseal
Linus Torvalds [Sun, 25 Jan 2026 17:57:31 +0000 (09:57 -0800)]
Merge tag 'char-misc-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/iio driver fixes from Greg KH:
"Here are some small char/misc/iio and some other minor driver
subsystem fixes for 6.19-rc7. Nothing huge here, just some fixes for
reported issues including:
- lots of little iio driver fixes
- comedi driver fixes
- mux driver fix
- w1 driver fixes
- uio driver fix
- slimbus driver fixes
- hwtracing bugfix
- other tiny bugfixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
comedi: dmm32at: serialize use of paged registers
mei: trace: treat reg parameter as string
uio: pci_sva: correct '-ENODEV' check logic
uacce: ensure safe queue release with state management
uacce: implement mremap in uacce_vm_ops to return -EPERM
uacce: fix isolate sysfs check condition
uacce: fix cdev handling in the cleanup path
slimbus: core: clean up of_slim_get_device()
slimbus: core: fix of_slim_get_device() kernel doc
slimbus: core: amend slim_get_device() kernel doc
slimbus: core: fix device reference leak on report present
slimbus: core: fix runtime PM imbalance on report present
slimbus: core: fix OF node leak on registration failure
intel_th: rename error label
intel_th: fix device leak on output open()
comedi: Fix getting range information for subdevices 16 to 255
mux: mmio: Fix IS_ERR() vs NULL check in probe()
interconnect: debugfs: initialize src_node and dst_node to empty strings
iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source
iio: accel: iis328dq: fix gain values
...
Linus Torvalds [Sun, 25 Jan 2026 17:53:28 +0000 (09:53 -0800)]
Merge tag 'tty-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are three small serial driver fixes for 6.19-rc7 that resolve
some reported issues. They include:
- tty->port race condition fix for a reported problem
- qcom_geni serial driver fix
- 8250_pci serial driver fix
All of these have been in linux-next with no reported issues"
* tag 'tty-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: Fix not set tty->port race condition
serial: 8250_pci: Fix broken RS485 for F81504/508/512
serial: qcom_geni: Fix BT failure regression on RB2 platform
Linus Torvalds [Sun, 25 Jan 2026 17:42:25 +0000 (09:42 -0800)]
Merge tag 'input-for-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a couple of quirks to i8042 to enable keyboard on a Asus and MECHREVO
laptops
* tag 'input-for-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add quirks for MECHREVO Wujie 15X Pro
Input: i8042 - add quirk for ASUS Zenbook UX425QA_UM425QA
Srish Srinivasan [Fri, 23 Jan 2026 16:55:03 +0000 (22:25 +0530)]
keys/trusted_keys: fix handle passed to tpm_buf_append_name during unseal
TPM2_Unseal[1] expects the handle of a loaded data object, and not the
handle of the parent key. But the tpm2_unseal_cmd provides the parent
keyhandle instead of blob_handle for the session HMAC calculation. This
causes unseal to fail.
Fix this by passing blob_handle to tpm_buf_append_name().
Fixes: 6e9722e9a7bf ("tpm2-sessions: Fix out of range indexing in name_size") Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
gongqi [Thu, 22 Jan 2026 15:54:59 +0000 (23:54 +0800)]
Input: i8042 - add quirks for MECHREVO Wujie 15X Pro
The MECHREVO Wujie 15X Pro requires several i8042 quirks to function
correctly. Specifically, NOMUX, RESET_ALWAYS, NOLOOP, and NOPNP are
needed to ensure the keyboard and touchpad work reliably.
feng [Sun, 25 Jan 2026 05:44:12 +0000 (21:44 -0800)]
Input: i8042 - add quirk for ASUS Zenbook UX425QA_UM425QA
The ASUS Zenbook UX425QA_UM425QA fails to initialize the keyboard after
a cold boot.
A quirk already exists for "ZenBook UX425", but some Zenbooks report
"Zenbook" with a lowercase 'b'. Since DMI matching is case-sensitive,
the existing quirk is not applied to these "extra special" Zenbooks.
Testing confirms that this model needs the same quirks as the ZenBook
UX425 variants.
Linus Torvalds [Sun, 25 Jan 2026 02:55:48 +0000 (18:55 -0800)]
Merge tag 'riscv-for-linus-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"The notable changes here are the three RISC-V timer compare register
update sequence patches. These only apply to RV32 systems and are
related to the 64-bit timer compare value being split across two
separate 32-bit registers.
We weren't using the appropriate three-write sequence, documented in
the RISC-V ISA specifications, to avoid spurious timer interrupts
during the update sequence; so, these patches now use the recommended
sequence.
This doesn't affect 64-bit RISC-V systems, since the timer compare
value fits inside a single register and can be updated with a single
write.
- Fix the RISC-V timer compare register update sequence on RV32
systems to use the recommended sequence in the RISC-V ISA manual
This avoids spurious interrupts during updates
- Add a dependence on the new CONFIG_CACHEMAINT_FOR_DMA Kconfig
symbol for Renesas and StarFive RISC-V SoCs
- Add a temporary workaround for a Clang compiler bug caused by using
asm_goto_output for get_user()
- Clarify our documentation to specifically state a particular ISA
specification version for a chapter number reference"
* tag 'riscv-for-linus-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add intermediate cast to 'unsigned long' in __get_user_asm
riscv: Use 64-bit variable for output in __get_user_asm
soc: renesas: Fix missing dependency on new CONFIG_CACHEMAINT_FOR_DMA
riscv: ERRATA_STARFIVE_JH7100: Fix missing dependency on new CONFIG_CACHEMAINT_FOR_DMA
riscv: suspend: Fix stimecmp update hazard on RV32
riscv: kvm: Fix vstimecmp update hazard on RV32
riscv: clocksource: Fix stimecmp update hazard on RV32
Documentation: riscv: uabi: Clarify ISA spec version for canonical order
Linus Torvalds [Sun, 25 Jan 2026 01:18:57 +0000 (17:18 -0800)]
Merge tag 'trace-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix a crash with passing a stacktrace between synthetic events
A synthetic event is an event that combines two events into a single
event that can display fields from both events as well as the time
delta that took place between the events. It can also pass a
stacktrace from the first event so that it can be displayed by the
synthetic event (this is useful to get a stacktrace of a task
scheduling out when blocked and recording the time it was blocked
for).
A synthetic event can also connect an existing synthetic event to
another event. An issue was found that if the first synthetic event
had a stacktrace as one of its fields, and that stacktrace field was
passed to the new synthetic event to be displayed, it would crash the
kernel. This was due to the stacktrace not being saved as a
stacktrace but was still marked as one. When the stacktrace was read,
it would try to read an array but instead read the integer metadata
of the stacktrace and dereferenced a bad value.
Fix this by saving the stacktrace field as a stacktrace.
- Fix possible overflow in cmp_mod_entry() compare function
A binary search is used to find a module address and if the addresses
are greater than 2GB apart it could lead to truncation and cause a
bad search result. Use normal compares instead of a subtraction
between addresses to calculate the compare value.
- Fix output of entry arguments in function graph tracer
Depending on the configurations enabled, the entry can be two
different types that hold the argument array. The macro
FGRAPH_ENTRY_ARGS() is used to find the correct arguments from the
given type. One location was missed and still referenced the
arguments directly via entry->args and could produce the wrong value
depending on how the kernel was configured.
- Fix memory leak in scripts/tracepoint-update build tool
If the array fails to allocate, the memory for the values needs to be
freed and was not. Free the allocated values if the array failed to
allocate.
* tag 'trace-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
scripts/tracepoint-update: Fix memory leak in add_string() on failure
function_graph: Fix args pointer mismatch in print_graph_retval()
tracing: Avoid possible signed 64-bit truncation
tracing: Fix crash on synthetic stacktrace field usage
Dan Williams [Sat, 24 Jan 2026 01:22:56 +0000 (17:22 -0800)]
Documentation: Project continuity
Document project continuity procedures. This is a plan for a plan for
navigating events that affect the forward progress of the canonical
Linux repository, torvalds/linux.git.
It is a follow-up from Maintainer Summit [1].
Co-developed-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Kees Cook <kees@kernel.org> Reviewed-by: Jiri Kosina <jkosina@suse.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Link: https://lwn.net/Articles/1050179/ Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 24 Jan 2026 18:13:22 +0000 (10:13 -0800)]
Merge tag 'driver-core-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Always inline I/O and IRQ methods using build_assert!() to avoid
false positive build errors
- Do not free the driver's device private data in I2C shutdown()
avoiding race conditions that can lead to UAF bugs
- Drop the driver's device private data after the driver has been
fully unbound from its device to avoid UAF bugs from &Device<Bound>
scopes, such as IRQ callbacks
* tag 'driver-core-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
rust: driver: drop device private data post unbind
rust: driver: add DriverData type to the DriverLayout trait
rust: driver: add DEVICE_DRIVER_OFFSET to the DriverLayout trait
rust: driver: introduce a DriverLayout trait
rust: auxiliary: add Driver::unbind() callback
rust: i2c: do not drop device private data on shutdown()
rust: irq: always inline functions using build_assert with arguments
rust: io: always inline functions using build_assert with arguments
Linus Torvalds [Sat, 24 Jan 2026 17:36:03 +0000 (09:36 -0800)]
Merge tag 'timers-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
- Fix auxiliary timekeeper update & locking bug
- Reduce the sensitivity of the clocksource watchdog,
to fix false positive measurements that marked the
TSC clocksource unstable
* tag 'timers-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Reduce watchdog readout delay limit to prevent false positives
timekeeping: Adjust the leap state for the correct auxiliary timekeeper
Linus Torvalds [Sat, 24 Jan 2026 17:24:17 +0000 (09:24 -0800)]
Merge tag 'perf-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Fix mmap_count warning & bug when creating a group member event
with the PERF_FLAG_FD_OUTPUT flag
- Disable the sample period == 1 branch events BTS optimization
on guests, because BTS is not virtualized
* tag 'perf-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Do not enable BTS for guests
perf: Fix refcount warning on event->mmap_count increment
Linus Torvalds [Sat, 24 Jan 2026 17:02:56 +0000 (09:02 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull arm64 kvm fixes from Paolo Bonzini:
- Ensure early return semantics are preserved for pKVM fault handlers
- Fix case where the kernel runs with the guest's PAN value when
CONFIG_ARM64_PAN is not set
- Make stage-1 walks to set the access flag respect the access
permission of the underlying stage-2, when enabled
- Propagate computed FGT values to the pKVM view of the vCPU at
vcpu_load()
- Correctly program PXN and UXN privilege bits for hVHE's stage-1 page
tables
- Check that the VM is actually using VGICv3 before accessing the GICv3
CPU interface
- Delete some unused code
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Invert KVM_PGTABLE_WALK_HANDLE_FAULT to fix pKVM walkers
KVM: arm64: Don't blindly set set PSTATE.PAN on guest exit
KVM: arm64: nv: Respect stage-2 write permssion when setting stage-1 AF
KVM: arm64: Remove unused vcpu_{clear,set}_wfx_traps()
KVM: arm64: Remove unused parameter in synchronize_vcpu_pstate()
KVM: arm64: Remove extra argument for __pvkm_host_{share,unshare}_hyp()
KVM: arm64: Inject UNDEF for a register trap without accessor
KVM: arm64: Copy FGT traps to unprotected pKVM VCPU on VCPU load
KVM: arm64: Fix EL2 S1 XN handling for hVHE setups
KVM: arm64: gic: Check for vGICv3 when clearing TWI
Ajay Neeli [Wed, 24 Dec 2025 05:39:50 +0000 (11:09 +0530)]
scsi: ufs: amd-versal2: Fix PHY initialization in HCE enable notify
Move the PHY initialization from PRE_CHANGE to POST_CHANGE in the
ufs_versal2_hce_enable_notify() callback. This ensures that the PHY is
initialized after the host controller enable sequence is complete, rather
than before it starts.
The PHY initialization requires the UFS host controller to be in a stable
enabled state to properly configure the MPHY registers. Moving this to
POST_CHANGE aligns with the expected initialization order and prevents
potential timing issues during controller startup.
Fixes: 769b8b2ffded ("scsi: ufs: amd-versal2: Add UFS support for AMD Versal Gen 2 SoC") Signed-off-by: Ajay Neeli <ajay.neeli@amd.com> Link: https://patch.msgid.link/20251224053950.54213-1-ajay.neeli@amd.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The value 70000 passes the "tpgt > UINT_MAX" check since 70000 is far less
than 4294967295. However, when assigned to the u16 field tpg->tport_tpgt,
the value is silently truncated to 4464 (70000 & 0xFFFF). This causes the
value the user specified to differ from what is actually stored, leading to
confusion and potential unexpected behavior.
Fix this by changing the type of "tpgt" to u16 and using kstrtou16() which
will properly reject values outside the u16 range.
Fixes: a511ce339780 ("sbp-target: Initial merge of firewire/ieee-1394 target mode support") Signed-off-by: Kery Qi <qikeyu2017@gmail.com> Link: https://patch.msgid.link/20260121114515.1829-2-qikeyu2017@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
projects / ceph-client.git / log