From 997bb80ba231c4a21237485ac6780d573be992c2 Mon Sep 17 00:00:00 2001 From: Jason Dillaman Date: Fri, 3 Nov 2017 10:09:38 -0400 Subject: [PATCH] doc/rbd: tweaks to the Windows iSCSI initiator directions Signed-off-by: Jason Dillaman --- doc/rbd/iscsi-initiator-win.rst | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/doc/rbd/iscsi-initiator-win.rst b/doc/rbd/iscsi-initiator-win.rst index c0f023b4180..4e2d672d64f 100644 --- a/doc/rbd/iscsi-initiator-win.rst +++ b/doc/rbd/iscsi-initiator-win.rst @@ -4,14 +4,15 @@ iSCSI Initiator for Microsoft Windows **Prerequisite:** -- Microsoft Windows 2016 +- Microsoft Windows Server 2016 **iSCSI Initiator, Discovery and Setup:** #. Install the iSCSI initiator driver and MPIO tools. -#. Launch the MPIO program, click on the “Discover Multi-Paths” tab select “Add - support for iSCSI devices”. +#. Launch the MPIO program, click on the "Discover Multi-Paths" tab, check the + "Add support for iSCSI devices” box, and click "Add". This will require a + reboot. #. On the iSCSI Initiator Properties window, on the "Discovery" tab, add a target portal. Enter the IP address or DNS name and Port of the Ceph iSCSI gateway. @@ -32,7 +33,7 @@ iSCSI Initiator for Microsoft Windows Configuring the MPIO load balancing policy, setting the timeout and retry options are using PowerShell with the ``mpclaim`` command. The -reset is done in the MPIO tool. +rest is done in the iSCSI Initiator tool. .. note:: It is recommended to increase the ``PDORemovePeriod`` option to 120 @@ -53,8 +54,8 @@ reset is done in the MPIO tool. mpclaim -s -m MSDSM-wide Load Balance Policy: Fail Over Only -#. Using the MPIO tool, from the “Targets” tab, click on the - “Devices...” button. +#. Using the iSCSI Initiator tool, from the “Targets” tab, click on + the “Devices...” button. #. From the Devices window, select a disk and click the “MPIO...” button. -- 2.39.5