4 # Test Linux LVM snapshot creation
6 # The timing and placement of kills and waits is particularily sensitive.
7 # Don't change them unless you want to spend some time getting it right again.
9 #-----------------------------------------------------------------------
10 # Copyright (c) 2000, 2002 Silicon Graphics, Inc. All Rights Reserved.
12 # This program is free software; you can redistribute it and/or modify it
13 # under the terms of version 2 of the GNU General Public License as
14 # published by the Free Software Foundation.
16 # This program is distributed in the hope that it would be useful, but
17 # WITHOUT ANY WARRANTY; without even the implied warranty of
18 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
20 # Further, this software is distributed without any warranty that it is
21 # free of the rightful claim of any third person regarding infringement
22 # or the like. Any license provided herein, whether implied or
23 # otherwise, applies only to this software file. Patent licenses, if
24 # any, provided herein do not apply to combinations of this program with
25 # other software, or any other product whatsoever.
27 # You should have received a copy of the GNU General Public License along
28 # with this program; if not, write the Free Software Foundation, Inc., 59
29 # Temple Place - Suite 330, Boston MA 02111-1307, USA.
31 # Contact information: Silicon Graphics, Inc., 1600 Amphitheatre Pkwy,
32 # Mountain View, CA 94043, or:
36 # For further information regarding this notice, see:
38 # http://oss.sgi.com/projects/GenInfo/SGIGPLNoticeExplan/
39 #-----------------------------------------------------------------------
42 owner=freemyer@NorcrossGroup.com
45 echo "QA output created by $seq"
50 status=1 # failure is the default!
52 # Either "dd" or "fsstress" can be used to generate io load.
53 # Setting both to "FALSE" tests with no io load.
54 GENERATE_IO_LOAD_VIA_DD=TRUE
55 GENERATE_IO_LOAD_VIA_FSSTRESS=TRUE
56 DELAY_BETWEEN_ITERATIONS=10
61 SCRATCH_SNAP_MNT="$tmp/scratch_snap"
63 # Only needed if running by hand, ie. check sets these
64 #SCRATCH_LVM_DEV=/dev/xxxx
69 echo Cleanup beginning
72 xfs_freeze -u "$SCRATCH_MNT"
74 sleep 10 # Give the dd loop time to finish
76 # Comment out unless needed.
77 # If needed, wrap with logic to ensure the FS is mounted.
78 # Kill off any other possible stray stragglers that may be out there.
79 # There should not be any.
80 #fuser -k -m "$SCRATCH_SNAP_MNT/dummy" >/dev/null 2>&1
81 #fuser -k -m "$SCRATCH_MNT/dummy" >/dev/null 2>&1
85 umount "$SCRATCH_SNAP_MNT" > /dev/null 2>&1
86 rmdir "$SCRATCH_SNAP_MNT" > /dev/null 2>&1
87 umount "$SCRATCH_MNT" > /dev/null 2>&1
89 lvremove -f "$VG/scratch_snap" > /dev/null 2>&1
90 lvremove -f "$VG/scratch" > /dev/null 2>&1
94 rm -rf "$tmp" # if we ever use tmp files
99 trap "_cleanup" 0 1 2 3 15
102 # get standard environment, filters and checks
106 if [ -e "$SCRATCH_SNAP_MNT" ]; then
107 rmdir "$SCRATCH_SNAP_MNT" || _notrun "Cannot rmdir $SCRATCH_SNAP_MNT"
109 mkdir "$SCRATCH_SNAP_MNT"
111 #Verify we have the lvm user tools
112 [ -x /sbin/lvcreate ] || _notrun "lvcreate utility is not installed in /sbin"
113 [ -x /sbin/lvremove ] || _notrun "lvremove utility is not installed in /sbin"
115 # If the above fails for LVM 2, the below may be useful notes
116 # try "lvm vgdisplay --version" and look for a > 1.9x version number, eg,
118 # LVM version: 1.95.10-cvs (2002-05-31)
119 # Library version: 0.96.03-ioctl-cvs (2002-06-27)
120 # Driver version: 1.0.3
125 # Check if LVM 1 is in the kernel
126 if grep lvm /proc/devices > /dev/null; then LVM=true; fi
128 # Check if LVM 2 is in the kernel
129 if grep device-mapper /proc/devices > /dev/null; then LVM=true; fi
131 # Check if EVMS is in the kernel
132 #TODO # I don't know how to do this one.
134 [ "$LVM" = false ] && _notrun "LVM is not present in the running kernel."
137 # real QA test starts here
139 # Create a PV set from the scratch partition
140 #TODO # (I don't know if this is needed.and it is dangerous because it intentionally deletes the partition table!!!
141 #TODO # dd if=/dev/zero of="$SCRATCH_LVM_DEV" bs=512 count=1
142 #TODO # pvcreate "$SCRATCH_LVM_DEV"
144 # Create a VG from the PV
145 #TODO # vgcreate "$VG" "$SCRATCH_LVM_DEV"
147 # Create a LV in the VG to snapshot
148 #TODO # lvcreate -L 2G -n scratch "$VG"
153 mount "$VG/scratch" "$SCRATCH_MNT"
157 if [ "$GENERATE_IO_LOAD_VIA_DD" != FALSE ]
159 # Create a large 64 Meg zero filled file on the LV
160 dd if=/dev/zero of=$SCRATCH_MNT/dummy bs=64k count=1000 >/dev/null 2>&1
162 # Setup infinite loop copying the large file, thus generating heavy I/O
164 while [ -f "$tmp/running" ]
166 dd if="$SCRATCH_MNT/dummy" of="$SCRATCH_MNT/junk" bs=64k \
168 # This forces metadata updates the next time around
169 rm "$SCRATCH_MNT/junk"
174 if [ "$GENERATE_IO_LOAD_VIA_FSSTRESS" != FALSE ]
176 STRESS_DIR="$SCRATCH_MNT/fsstress_test_dir"
179 while [ -f "$tmp/running" ]
181 # -n 10 makes this take about 10 seconds,
182 # This allows the loop to end shortly after $tmp/running
184 $here/ltp/fsstress -d "$STRESS_DIR" -n 10 > /dev/null 2>&1
193 while [ $ii -le "$ITERATIONS" ]
196 # Useful if running interactively, but not from the xfs test scripts
199 # If the VFS lock patch is present, the calls to xfs_freeze
200 # are redundant, but should cause no problems
202 xfs_freeze -f "$SCRATCH_MNT"
203 [ $? != 0 ] && echo xfs_freeze -f "$SCRATCH_MNT" failed
205 lvcreate --snapshot --size 1G --name scratch_snap "$VG/scratch"\
209 echo "Snapshot $SCRATCH_MNT create failed, status=$ret"
211 SNAPSHOT_shell_pid=$!
213 # If the Snapshot has not completed in ten minutes, kill it
215 # I have NOT figured out how to kill the sleep 600 before
216 # it exits naturally.
217 # This does not cause a problem, but it clutters the ps table.
220 # The kill $TIMEOUT_shell_pid keeps the below from occuring
221 echo Snapshot Lockup Occured on loop $ii
222 xfs_freeze -u "$SCRATCH_MNT"
227 wait "$SNAPSHOT_shell_pid"
229 exec 2> /dev/null # Send the shells stderr to /dev/null
230 kill "$TIMEOUT_shell_pid" # Cancel the timeout
231 wait "$TIMEOUT_shell_pid" # This causes consistent shell
232 # notification for some unknown reason
233 exec 2>&1 # Put it back to the same as stdout
235 # If the VFS lock patch is present, the calls to xfs_freeze
236 # are redundant, but should cause no problems
238 xfs_freeze -u "$SCRATCH_MNT"
239 [ $? != 0 ] && echo xfs_freeze -u "$SCRATCH_MNT" failed
242 mount -t xfs -o ro,nouuid "$VG/scratch_snap" "$SCRATCH_SNAP_MNT"
243 [ $? -eq 0 ] || echo mount for "$SCRATCH_SNAP_MNT" failed
245 umount "$SCRATCH_SNAP_MNT"
246 [ $? -eq 0 ] || echo umount for "$SCRATCH_SNAP_MNT" failed
248 lvremove -f "$VG/scratch_snap" > /dev/null 2>&1
249 [ $? -eq 0 ] || echo lvremove for "$VG/scratch_snap" failed
253 sleep "$DELAY_BETWEEN_ITERATIONS"
254 # The VG seems to need time to stabalize between snapshots
255 # With LVM 1.0.3 and XFS 1.1, I have tried this at 3600 seconds
256 # and still had failures
261 echo SUCCESS, COMPLETED ALL ITERATIONS WITH NO TIME OUTS!!!!!!!!!!!!
264 exit 1 # _cleanup should exit, so we should never get here.