3 # Copyright (c) 2000-2003,2006 Silicon Graphics, Inc. All Rights Reserved.
5 # This program is free software; you can redistribute it and/or
6 # modify it under the terms of the GNU General Public License as
7 # published by the Free Software Foundation.
9 # This program is distributed in the hope that it would be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 # GNU General Public License for more details.
14 # You should have received a copy of the GNU General Public License
15 # along with this program; if not, write the Free Software Foundation,
16 # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
19 # setup and check for config parameters, and in particular
21 # EMAIL - email of the script runner.
22 # TEST_DIR - scratch test directory that is in an already
23 # mounted XFS file system, needs to be be world
25 # TEST_DEV - device for file system containing TEST_DIR
28 # SCRATCH_DEV - device you can make a scratch file system on
29 # SCRATCH_MNT - mount point for scratch file system
30 # SCRATCH_LOGDEV - scratch log device for external log testing
31 # SCRATCH_RTDEV - scratch rt dev
32 # TEST_LOGDEV - test log device for external log testing
33 # TEST_RTDEV - test rt dev
34 # TAPE_DEV - the tape device for the xfsdump tests
35 # RMT_TAPE_DEV - the remote tape device for the xfsdump tests
36 # RMT_IRIXTAPE_DEV- the IRIX remote tape device for the xfsdump tests
37 # RMT_TAPE_USER - remote user for tape device
38 # SELINUX_MOUNT_OPTIONS - Options to use when SELinux is enabled.
40 # - These can be added to $HOST_CONFIG_DIR (witch default to ./config)
41 # below or a separate local configuration file can be used (using
42 # the HOST_OPTIONS variable).
43 # - This script is shared by the stress test system and the auto-qa
45 # - TEST_DEV & TEST_DIR must be assigned.
46 # - this script shouldn't make any assertions about filesystem
47 # validity or mountedness.
50 # all tests should use a common language setting to prevent golden
55 # Warning: don't put freeware before /usr/bsd on IRIX coz you'll
56 # get the wrong hostname and set your system name to -s :)
57 [ -d /usr/bsd ] && PATH=$PATH:/usr/bsd
58 [ -d /usr/freeware/bin ] && PATH=$PATH:/usr/freeware/bin
61 export HOST=`hostname -s`
62 export HOSTOS=`uname -s`
63 [ "$HOSTOS" = "IRIX64" ] && export HOSTOS="IRIX"
65 export MODULAR=0 # using XFS as a module or not
66 export BOOT="/boot" # install target for kernels
67 export EXTRA=${EXTRA:=xfs-qa}
69 # general parameters (mainly for auto-qa)
70 export SOAK_PROC=3 # -p option to fsstress
71 export SOAK_STRESS=10000 # -n option to fsstress
72 export SOAK_PASSES=-1 # count of repetitions of fsstress (while soaking)
73 export EMAIL=root@localhost # where auto-qa will send its status messages
74 export HOST_OPTIONS=${HOST_OPTIONS:=local.config}
75 export CHECK_OPTIONS=${CHECK_OPTIONS:="-g auto"}
76 export BENCH_PASSES=${BENCH_PASSES:=5}
77 export XFS_MKFS_OPTIONS=${XFS_MKFS_OPTIONS:=-bsize=4096}
78 export TIME_FACTOR=${TIME_FACTOR:=1}
79 export LOAD_FACTOR=${LOAD_FACTOR:=1}
80 export DEBUGFS_MNT=${DEBUGFS_MNT:="/sys/kernel/debug"}
82 # some constants for overlayfs setup
83 export OVL_UPPER="ovl-upper"
84 export OVL_LOWER="ovl-lower"
85 export OVL_WORK="ovl-work"
86 # overlay mount point parent must be the base fs root
87 export OVL_MNT="ovl-mnt"
90 #export DEBUG=${DEBUG:=...} # arbitrary CFLAGS really.
91 export MALLOCLIB=${MALLOCLIB:=/usr/lib/libefence.a}
92 export LOCAL_CONFIGURE_OPTIONS=${LOCAL_CONFIGURE_OPTIONS:=--enable-readline=yes}
94 export RECREATE_TEST_DEV=false
96 # $1 = prog to look for
102 # Handle mkfs.btrfs which does (or does not) require -f to overwrite
103 set_btrfs_mkfs_prog_path_with_opts()
105 p=`set_prog_path mkfs.btrfs`
106 if [ "$p" != "" ] && grep -q 'force overwrite' $p; then
120 export MKFS_PROG="`set_prog_path mkfs`"
121 [ "$MKFS_PROG" = "" ] && _fatal "mkfs not found"
123 export MOUNT_PROG="`set_prog_path mount`"
124 [ "$MOUNT_PROG" = "" ] && _fatal "mount not found"
126 export UMOUNT_PROG="`set_prog_path umount`"
127 [ "$UMOUNT_PROG" = "" ] && _fatal "umount not found"
129 export FSSTRESS_PROG="./ltp/fsstress"
130 [ ! -x $FSSTRESS_PROG ] && _fatal "fsstress not found or executable"
132 export PERL_PROG="`set_prog_path perl`"
133 [ "$PERL_PROG" = "" ] && _fatal "perl not found"
135 export AWK_PROG="`set_prog_path awk`"
136 [ "$AWK_PROG" = "" ] && _fatal "awk not found"
138 export SED_PROG="`set_prog_path sed`"
139 [ "$SED_PROG" = "" ] && _fatal "sed not found"
141 export BC_PROG="`set_prog_path bc`"
142 [ "$BC_PROG" = "" ] && _fatal "bc not found"
144 export PS_ALL_FLAGS="-ef"
146 export DF_PROG="`set_prog_path df`"
147 [ "$DF_PROG" = "" ] && _fatal "df not found"
148 [ "$HOSTOS" = "Linux" ] && export DF_PROG="$DF_PROG -T -P"
150 export XFS_IO_PROG="`set_prog_path xfs_io`"
151 [ "$XFS_IO_PROG" = "" ] && _fatal "xfs_io not found"
153 export XFS_LOGPRINT_PROG="`set_prog_path xfs_logprint`"
154 export XFS_REPAIR_PROG="`set_prog_path xfs_repair`"
155 export XFS_DB_PROG="`set_prog_path xfs_db`"
156 export XFS_GROWFS_PROG=`set_prog_path xfs_growfs`
157 export XFS_SCRUB_PROG="`set_prog_path xfs_scrub`"
158 export XFS_PARALLEL_REPAIR_PROG="`set_prog_path xfs_prepair`"
159 export XFS_PARALLEL_REPAIR64_PROG="`set_prog_path xfs_prepair64`"
160 export __XFSDUMP_PROG="`set_prog_path xfsdump`"
161 if [ -n "$__XFSDUMP_PROG" ]; then
162 export XFSDUMP_PROG="$__XFSDUMP_PROG -e"
164 export XFSDUMP_PROG=""
166 export XFSRESTORE_PROG="`set_prog_path xfsrestore`"
167 export XFSINVUTIL_PROG="`set_prog_path xfsinvutil`"
168 export GETFATTR_PROG="`set_prog_path getfattr`"
169 export SETFATTR_PROG="`set_prog_path setfattr`"
170 export CHACL_PROG="`set_prog_path chacl`"
171 export ATTR_PROG="`set_prog_path attr`"
172 export QUOTA_PROG="`set_prog_path quota`"
173 export XFS_QUOTA_PROG="`set_prog_path xfs_quota`"
174 export KILLALL_PROG="`set_prog_path killall`"
175 export INDENT_PROG="`set_prog_path indent`"
176 export XFS_COPY_PROG="`set_prog_path xfs_copy`"
177 export FSTRIM_PROG="`set_prog_path fstrim`"
178 export DUMPE2FS_PROG="`set_prog_path dumpe2fs`"
179 export FIO_PROG="`set_prog_path fio`"
180 export FILEFRAG_PROG="`set_prog_path filefrag`"
181 export E4DEFRAG_PROG="`set_prog_path e4defrag`"
182 export LOGGER_PROG="`set_prog_path logger`"
183 export DBENCH_PROG="`set_prog_path dbench`"
184 export DMSETUP_PROG="`set_prog_path dmsetup`"
185 export WIPEFS_PROG="`set_prog_path wipefs`"
186 export DUMP_PROG="`set_prog_path dump`"
187 export RESTORE_PROG="`set_prog_path restore`"
188 export LVM_PROG="`set_prog_path lvm`"
189 export CHATTR_PROG="`set_prog_path chattr`"
190 export DEBUGFS_PROG="`set_prog_path debugfs`"
191 export UUIDGEN_PROG="`set_prog_path uuidgen`"
192 export GETRICHACL_PROG="`set_prog_path getrichacl`"
193 export SETRICHACL_PROG="`set_prog_path setrichacl`"
194 export KEYCTL_PROG="`set_prog_path keyctl`"
195 export XZ_PROG="`set_prog_path xz`"
196 export FLOCK_PROG="`set_prog_path flock`"
197 export LDD_PROG="`set_prog_path ldd`"
198 export TIMEOUT_PROG="`set_prog_path timeout`"
199 export MAN_PROG="`set_prog_path man`"
200 export NFS4_SETFACL_PROG="`set_prog_path nfs4_setfacl`"
201 export NFS4_GETFACL_PROG="`set_prog_path nfs4_getfacl`"
203 # use 'udevadm settle' or 'udevsettle' to wait for lv to be settled.
204 # newer systems have udevadm command but older systems like RHEL5 don't.
205 # But if neither one is available, just set it to "sleep 1" to wait for lv to
207 UDEV_SETTLE_PROG="`set_prog_path udevadm`"
208 if [ "$UDEV_SETTLE_PROG" == "" ]; then
209 # try udevsettle command
210 UDEV_SETTLE_PROG="`set_prog_path udevsettle`"
212 # udevadm is available, add 'settle' as subcommand
213 UDEV_SETTLE_PROG="$UDEV_SETTLE_PROG settle"
215 # neither command is available, use sleep 1
216 if [ "$UDEV_SETTLE_PROG" == "" ]; then
217 UDEV_SETTLE_PROG="sleep 1"
219 export UDEV_SETTLE_PROG
223 export MKFS_XFS_PROG="`set_prog_path mkfs_xfs`"
224 export MKFS_UDF_PROG="`set_prog_path mkfs_udf`"
225 export XFS_FSR_PROG="`set_prog_path /usr/etc/fsr_xfs`"
226 export MKFS_NFS_PROG="false"
227 export MKFS_CIFS_PROG="false"
230 export MKFS_XFS_PROG="`set_prog_path mkfs.xfs`"
231 export MKFS_EXT4_PROG="`set_prog_path mkfs.ext4`"
232 export MKFS_UDF_PROG="`set_prog_path mkudffs`"
233 export MKFS_BTRFS_PROG="`set_btrfs_mkfs_prog_path_with_opts`"
234 export MKFS_F2FS_PROG="`set_prog_path mkfs.f2fs`"
235 export DUMP_F2FS_PROG="`set_prog_path dump.f2fs`"
236 export BTRFS_UTIL_PROG="`set_prog_path btrfs`"
237 export BTRFS_SHOW_SUPER_PROG="`set_prog_path btrfs-show-super`"
238 export BTRFS_CONVERT_PROG="`set_prog_path btrfs-convert`"
239 export XFS_FSR_PROG="`set_prog_path xfs_fsr`"
240 export MKFS_NFS_PROG="false"
241 export MKFS_CIFS_PROG="false"
242 export MKFS_OVERLAY_PROG="false"
243 export MKFS_REISER4_PROG="`set_prog_path mkfs.reiser4`"
244 export E2FSCK_PROG="`set_prog_path e2fsck`"
245 export TUNE2FS_PROG="`set_prog_path tune2fs`"
249 # SELinux adds extra xattrs which can mess up our expected output.
250 # So, mount with a context, and they won't be created.
252 # Since the context= option only accepts contexts defined in the SELinux
253 # policy, and different systems may have different policies with
254 # different context names, use the context of an existing directory.
255 # Assume that any valid context is fine, since xfstests should really
256 # only be run from an "unconfined" process, or with SELinux in permissive
257 # mode. But if not, just specify your own SELINUX_MOUNT_OPTIONS.
258 if [ -x /usr/sbin/selinuxenabled ] && /usr/sbin/selinuxenabled; then
259 : ${SELINUX_MOUNT_OPTIONS:="-o context=$(stat -c %C /)"}
260 export SELINUX_MOUNT_OPTIONS
263 # check if mkfs.xfs supports v5 xfs
264 XFS_MKFS_HAS_NO_META_SUPPORT=""
265 touch /tmp/crc_check.img
266 $MKFS_XFS_PROG -N -d file,name=/tmp/crc_check.img,size=32m -m crc=0 \
268 if [ $? -ne 0 ]; then
269 XFS_MKFS_HAS_NO_META_SUPPORT=true
271 rm -f /tmp/crc_check.img
272 export XFS_MKFS_HAS_NO_META_SUPPORT
274 # new doesn't need config file parsed, we can stop here
275 if [ "$iam" == "new" ]; then
283 export MOUNT_OPTIONS=$XFS_MOUNT_OPTIONS
286 export MOUNT_OPTIONS=$UDF_MOUNT_OPTIONS
289 export MOUNT_OPTIONS=$NFS_MOUNT_OPTIONS
292 export MOUNT_OPTIONS=$CIFS_MOUNT_OPTIONS
295 export MOUNT_OPTIONS=$CEPHFS_MOUNT_OPTIONS
298 export MOUNT_OPTIONS=$GLUSTERFS_MOUNT_OPTIONS
301 export MOUNT_OPTIONS=$OVERLAY_MOUNT_OPTIONS
303 ext2|ext3|ext4|ext4dev)
304 # acls & xattrs aren't turned on by default on ext$FOO
305 export MOUNT_OPTIONS="-o acl,user_xattr $EXT_MOUNT_OPTIONS"
308 export MOUNT_OPTIONS="-o acl,user_xattr $F2FS_MOUNT_OPTIONS"
311 # acls & xattrs aren't turned on by default on reiserfs
312 export MOUNT_OPTIONS="-o acl,user_xattr $REISERFS_MOUNT_OPTIONS"
315 # acls & xattrs aren't supported by reiser4
316 export MOUNT_OPTIONS=$REISER4_MOUNT_OPTIONS
319 # acls aren't turned on by default on gfs2
320 export MOUNT_OPTIONS="-o acl $GFS2_MOUNT_OPTIONS"
323 # We need to specify the size at mount, use 1G by default
324 export MOUNT_OPTIONS="-o size=1G $TMPFS_MOUNT_OPTIONS"
335 export TEST_FS_MOUNT_OPTS=$CIFS_MOUNT_OPTIONS
338 export TEST_FS_MOUNT_OPTS=$CEPHFS_MOUNT_OPTIONS
341 export TEST_FS_MOUNT_OPTS=$NFS_MOUNT_OPTIONS
344 export TEST_FS_MOUNT_OPTS=$GLUSTERFS_MOUNT_OPTIONS
355 export MKFS_OPTIONS=$XFS_MKFS_OPTIONS
358 [ ! -z "$udf_fsize" ] && \
359 UDF_MKFS_OPTIONS="$UDF_MKFS_OPTIONS -s $udf_fsize"
360 export MKFS_OPTIONS=$UDF_MKFS_OPTIONS
363 export MKFS_OPTIONS=$NFS_MKFS_OPTIONS
366 export MKFS_OPTIONS=$CIFS_MKFS_OPTIONS
369 export MKFS_OPTIONS=$CEPHFS_MKFS_OPTIONS
372 export MKFS_OPTIONS="$REISERFS_MKFS_OPTIONS -q"
375 export MKFS_OPTIONS=$REISER4_MKFS_OPTIONS
378 export MKFS_OPTIONS="$GFS2_MKFS_OPTIONS -O -p lock_nolock"
381 export MKFS_OPTIONS="$JFS_MKFS_OPTIONS -q"
384 export MKFS_OPTIONS="$F2FS_MKFS_OPTIONS"
394 ext2|ext3|ext4|ext4dev)
395 export FSCK_OPTIONS="-nf"
398 export FSCK_OPTIONS="--yes"
401 export FSCK_OPTIONS=""
404 export FSCK_OPTIONS="-n"
411 [ "$HOST_CONFIG_DIR" ] || HOST_CONFIG_DIR=`pwd`/configs
413 [ -f /etc/xfsqa.config ] && export HOST_OPTIONS=/etc/xfsqa.config
414 [ -f $HOST_CONFIG_DIR/$HOST ] && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST
415 [ -f $HOST_CONFIG_DIR/$HOST.config ] && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST.config
418 # Returns a list of sections in config file
419 # Each section starts with the section name in the format
420 # [section_name1]. Only alphanumeric characters and '_' is allowed
421 # in the section name otherwise the section will not be resognised.
422 # Section name must be contained between square brackets.
423 get_config_sections() {
424 sed -n -e "s/^\[\([[:alnum:]_]*\)\]/\1/p" < $1
427 if [ ! -f "$HOST_OPTIONS" ]; then
431 export HOST_OPTIONS_SECTIONS="-no-sections-"
432 export OPTIONS_HAVE_SECTIONS=false
433 if [ -f "$HOST_OPTIONS" ]; then
434 export HOST_OPTIONS_SECTIONS=`get_config_sections $HOST_OPTIONS`
435 if [ -z "$HOST_OPTIONS_SECTIONS" ]; then
437 export HOST_OPTIONS_SECTIONS="-no-sections-"
439 export OPTIONS_HAVE_SECTIONS=true
449 if [ -z "$dev" ]; then
450 if [ "$dev_needed" == "required" ]; then
451 _fatal "common/config: $name is required but not defined!"
456 if [ -b "$dev" ] || ( echo $dev | grep -qE ":|//" ); then
457 # block device or a network url
461 if [ "$FSTYP" == "overlay" ]; then
462 if [ ! -d "$dev" ]; then
463 _fatal "common/config: $name ($dev) is not a directory for overlay"
466 _fatal "common/config: $name ($dev) is not a block device or a network filesystem"
470 # check and return a canonical mount point path
471 _canonicalize_mountpoint()
476 if [ -d "$dir" ]; then
477 # this follows symlinks and removes all trailing "/"s
482 if [ "$FSTYP" != "overlay" ] || [[ "$name" == OVL_BASE_* ]]; then
483 _fatal "common/config: $name ($dir) is not a directory"
486 # base fs may not be mounted yet, so just check that parent dir
487 # exists (where base fs will be mounted) because we are going to
488 # mkdir the overlay mount point dir anyway
489 local base=`basename $dir`
490 local parent=`dirname $dir`
491 parent=`_canonicalize_mountpoint OVL_BASE_$name "$parent"`
493 # prepend the overlay mount point to canonical parent path
497 # On check -overlay, for the non multi section config case, this
498 # function is called on every test, before init_rc().
499 # When SCRATCH/TEST_* vars are defined in config file, config file
500 # is sourced on every test and this function overrides the vars
502 # When SCRATCH/TEST_* vars are defined in evironment and not
503 # in config file, this function is called after vars have already
504 # been overriden in the previous test.
505 # In that case, TEST_DEV is a directory and not a blockdev and
506 # the function will return without overriding the SCRATCH/TEST_* vars.
507 _overlay_config_override()
509 # There are 2 options for configuring overlayfs tests:
511 # 1. (legacy) SCRATCH/TEST_DEV point to existing directories
512 # on an already mounted fs. In this case, the new
513 # OVL_BASE_SCRATCH/TEST_* vars are set to use the legacy
514 # vars values (even though they may not be mount points).
516 [ ! -d "$TEST_DEV" ] || export OVL_BASE_TEST_DIR="$TEST_DEV"
517 [ ! -d "$SCRATCH_DEV" ] || export OVL_BASE_SCRATCH_MNT="$SCRATCH_DEV"
519 # 2. SCRATCH/TEST_DEV point to the base fs partitions. In this case,
520 # the new OVL_BASE_SCRATCH/TEST_DEV/MNT vars are set to the values
521 # of the configured base fs and SCRATCH/TEST_DEV vars are set to the
522 # overlayfs base and mount dirs inside base fs mount.
523 [ -b "$TEST_DEV" ] || return 0
525 # Config file may specify base fs type, but we obay -overlay flag
526 export OVL_BASE_FSTYP="$FSTYP"
529 # Store original base fs vars
530 export OVL_BASE_TEST_DEV="$TEST_DEV"
531 export OVL_BASE_TEST_DIR="$TEST_DIR"
532 export OVL_BASE_MOUNT_OPTIONS="$MOUNT_OPTIONS"
534 # Set TEST vars to overlay base and mount dirs inside base fs
535 export TEST_DEV="$OVL_BASE_TEST_DIR"
536 export TEST_DIR="$OVL_BASE_TEST_DIR/$OVL_MNT"
537 export MOUNT_OPTIONS="$OVERLAY_MOUNT_OPTIONS"
539 [ -b "$SCRATCH_DEV" ] || return 0
541 # Store original base fs vars
542 export OVL_BASE_SCRATCH_DEV="$SCRATCH_DEV"
543 export OVL_BASE_SCRATCH_MNT="$SCRATCH_MNT"
545 # Set SCRATCH vars to overlay base and mount dirs inside base fs
546 export SCRATCH_DEV="$OVL_BASE_SCRATCH_MNT"
547 export SCRATCH_MNT="$OVL_BASE_SCRATCH_MNT/$OVL_MNT"
550 _overlay_config_restore()
553 [ -z "$OVL_BASE_FSTYP" ] || export FSTYP=$OVL_BASE_FSTYP
554 [ -z "$OVL_BASE_TEST_DEV" ] || export TEST_DEV=$OVL_BASE_TEST_DEV
555 [ -z "$OVL_BASE_TEST_DIR" ] || export TEST_DIR=$OVL_BASE_TEST_DIR
556 [ -z "$OVL_BASE_SCRATCH_DEV" ] || export SCRATCH_DEV=$OVL_BASE_SCRATCH_DEV
557 [ -z "$OVL_BASE_SCRATCH_MNT" ] || export SCRATCH_MNT=$OVL_BASE_SCRATCH_MNT
558 [ -z "$OVL_BASE_MOUNT_OPTIONS" ] || export MOUNT_OPTIONS=$OVL_BASE_MOUNT_OPTIONS
561 # Parse config section options. This function will parse all the configuration
562 # within a single section which name is passed as an argument. For section
563 # name format see comments in get_config_sections().
564 # Empty lines and everything after '#' will be ignored.
565 # Configuration options should be defined in the format
567 # CONFIG_OPTION=value
569 # This 'CONFIG_OPTION' variable and will be exported as an environment variable.
570 parse_config_section() {
572 if ! $OPTIONS_HAVE_SECTIONS; then
575 eval `sed -e 's/[[:space:]]*\=[[:space:]]*/=/g' \
577 -e 's/[[:space:]]*$//' \
578 -e 's/^[[:space:]]*//' \
579 -e "s/^\([^=]*\)=\"\?'\?\([^\"']*\)\"\?'\?$/export \1=\"\2\"/" \
581 | sed -n -e "/^\[$SECTION\]/,/^\s*\[/{/^[^#].*\=.*/p;}"`
585 if [ ! -z "$CONFIG_INCLUDED" ] && ! $OPTIONS_HAVE_SECTIONS; then
589 # We might have overriden FSTYP and TEST/SCRATCH vars with overlay values
590 # in the previous section, so restore them to original values stored in
592 # We need to do this *before* old FSTYP and MOUNT_OPTIONS are recorded
593 # and *before* SCRATCH_DEV and MOUNT_OPTIONS are unset
594 if [ "$FSTYP" == "overlay" ]; then
595 _overlay_config_restore
598 local OLD_FSTYP=$FSTYP
599 local OLD_MOUNT_OPTIONS=$MOUNT_OPTIONS
600 local OLD_TEST_FS_MOUNT_OPTS=$TEST_FS_MOUNT_OPTS
601 local OLD_MKFS_OPTIONS=$MKFS_OPTIONS
602 local OLD_FSCK_OPTIONS=$FSCK_OPTIONS
603 local OLD_USE_EXTERNAL=$USE_EXTERNAL
610 # We might have deduced SCRATCH_DEV from the SCRATCH_DEV_POOL in the previous
611 # run, so we have to unset it now.
612 if [ "$SCRATCH_DEV_NOT_SET" == "true" ]; then
616 parse_config_section $1
618 if [ ! -z "$OLD_FSTYP" ] && [ $OLD_FSTYP != $FSTYP ]; then
619 [ -z "$MOUNT_OPTIONS" ] && _mount_opts
620 [ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
621 [ -z "$MKFS_OPTIONS" ] && _mkfs_opts
622 [ -z "$FSCK_OPTIONS" ] && _fsck_opts
624 # clear the external devices if we are not using them
625 if [ -z "$USE_EXTERNAL" ]; then
632 [ -z "$MOUNT_OPTIONS" ] && export MOUNT_OPTIONS=$OLD_MOUNT_OPTIONS
633 [ -z "$TEST_FS_MOUNT_OPTS" ] && export TEST_FS_MOUNT_OPTS=$OLD_TEST_FS_MOUNT_OPTS
634 [ -z "$MKFS_OPTIONS" ] && export MKFS_OPTIONS=$OLD_MKFS_OPTIONS
635 [ -z "$FSCK_OPTIONS" ] && export FSCK_OPTIONS=$OLD_FSCK_OPTIONS
636 [ -z "$USE_EXTERNAL" ] && export USE_EXTERNAL=$OLD_USE_EXTERNAL
639 # set default RESULT_BASE
640 if [ -z "$RESULT_BASE" ]; then
641 export RESULT_BASE="$here/results/"
644 # Mandatory Config values.
646 [ -z "$EMAIL" ] && MC="$MC EMAIL"
647 [ -z "$TEST_DIR" ] && MC="$MC TEST_DIR"
648 [ -z "$TEST_DEV" ] && MC="$MC TEST_DEV"
650 if [ -n "$MC" ]; then
651 echo "Warning: need to define parameters for host $HOST"
652 echo " or set variables:"
657 _check_device TEST_DEV required $TEST_DEV
658 export TEST_DIR=`_canonicalize_mountpoint TEST_DIR $TEST_DIR`
660 # a btrfs tester will set only SCRATCH_DEV_POOL, we will put first of its dev
661 # to SCRATCH_DEV and rest to SCRATCH_DEV_POOL to maintain the backward compatibility
662 if [ ! -z "$SCRATCH_DEV_POOL" ]; then
663 if [ ! -z "$SCRATCH_DEV" ]; then
664 echo "common/config: Error: \$SCRATCH_DEV ($SCRATCH_DEV) should be unset when \$SCRATCH_DEV_POOL ($SCRATCH_DEV_POOL) is set"
667 SCRATCH_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'`
669 export SCRATCH_DEV_NOT_SET=true
672 _check_device SCRATCH_DEV optional $SCRATCH_DEV
673 export SCRATCH_MNT=`_canonicalize_mountpoint SCRATCH_MNT $SCRATCH_MNT`
675 if [ -n "$USE_EXTERNAL" ]; then
676 _check_device TEST_RTDEV optional $TEST_RTDEV
677 _check_device TEST_LOGDEV optional $TEST_LOGDEV
678 _check_device SCRATCH_RTDEV optional $SCRATCH_RTDEV
679 _check_device SCRATCH_LOGDEV optional $SCRATCH_LOGDEV
682 # Override FSTYP from config when running ./check -overlay
683 # and maybe override base fs TEST/SCRATCH_DEV with overlay base dirs.
684 # We need to do this *after* default mount options are set by base FSTYP
685 # and *after* SCRATCH_DEV is deduced from SCRATCH_DEV_POOL
686 if [ "$OVERLAY" == "true" -o "$FSTYP" == "overlay" ]; then
687 _overlay_config_override
691 if [ -z "$CONFIG_INCLUDED" ]; then
692 get_next_config `echo $HOST_OPTIONS_SECTIONS | cut -f1 -d" "`
693 export CONFIG_INCLUDED=true
695 # Autodetect fs type based on what's on $TEST_DEV unless it's been set
697 if [ -z "$FSTYP" ] && \
698 [ "$HOSTOS" == "Linux" -o "$OSTYPE" == "linux-gnu" ] && \
699 [ ! -z "$TEST_DEV" ]; then
700 FSTYP=`blkid -c /dev/null -s TYPE -o value $TEST_DEV`
704 [ -z "$MOUNT_OPTIONS" ] && _mount_opts
705 [ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
706 [ -z "$MKFS_OPTIONS" ] && _mkfs_opts
707 [ -z "$FSCK_OPTIONS" ] && _fsck_opts
709 # We get here for the non multi section case, on every test that sources
710 # common/rc after re-sourcing the HOST_OPTIONS config file.
711 # Because of this re-sourcing, we need to re-canonicalize the configured
712 # mount points and re-override TEST/SCRATCH_DEV overlay vars.
714 # canonicalize the mount points
715 # this follows symlinks and removes all trailing "/"s
716 export TEST_DIR=`_canonicalize_mountpoint TEST_DIR $TEST_DIR`
717 export SCRATCH_MNT=`_canonicalize_mountpoint SCRATCH_MNT $SCRATCH_MNT`
719 # Override FSTYP from config when running ./check -overlay
720 # and maybe override base fs TEST/SCRATCH_DEV with overlay base dirs
721 if [ "$OVERLAY" == "true" -o "$FSTYP" == "overlay" ]; then
722 _overlay_config_override
726 # make sure this script returns success