common/config

   1 ##/bin/bash
   2 # SPDX-License-Identifier: GPL-2.0
   3 # Copyright (c) 2000-2003,2006 Silicon Graphics, Inc.  All Rights Reserved.
   4 #
   5 # setup and check for config parameters, and in particular
   6 #
   7 # EMAIL -           email of the script runner.
   8 # TEST_DIR -        scratch test directory that is in an already
   9 #                   mounted XFS file system, needs to be be world
  10 #                   writeable
  11 # TEST_DEV -        device for file system containing TEST_DIR
  12 #
  13 # and optionally:
  14 # SCRATCH_DEV -     device you can make a scratch file system on
  15 # SCRATCH_MNT -     mount point for scratch file system
  16 # SCRATCH_LOGDEV -  scratch log device for external log testing
  17 # SCRATCH_RTDEV -   scratch rt dev
  18 # TEST_LOGDEV -     test log device for external log testing
  19 # TEST_RTDEV -      test rt dev
  20 # TAPE_DEV -        the tape device for the xfsdump tests
  21 # RMT_TAPE_DEV -    the remote tape device for the xfsdump tests
  22 # RMT_IRIXTAPE_DEV- the IRIX remote tape device for the xfsdump tests
  23 # RMT_TAPE_USER -   remote user for tape device
  24 # SELINUX_MOUNT_OPTIONS - Options to use when SELinux is enabled.
  25 # KEEP_DMESG -      whether to keep all dmesg for each test case.
  26 #                   yes: keep all dmesg
  27 #                   no: only keep dmesg with error/warning (default)
  28 #
  29 # - These can be added to $HOST_CONFIG_DIR (witch default to ./config)
  30 #   below or a separate local configuration file can be used (using
  31 #   the HOST_OPTIONS variable).
  32 # - This script is shared by the stress test system and the auto-qa
  33 #   system
  34 # - TEST_DEV & TEST_DIR must be assigned.
  35 # - this script shouldn't make any assertions about filesystem
  36 #   validity or mountedness.
  37 #
  38
  39 . common/test_names
  40
  41 # all tests should use a common language setting to prevent golden
  42 # output mismatches.
  43 export LANG=C
  44 export LC_ALL=C
  45
  46 PATH=".:$PATH"
  47
  48 export HOST=`hostname -s`
  49 test `uname -s` = "Linux" || _fatal "fstests only supports Linux"
  50
  51 export MODULAR=0               # using XFS as a module or not
  52 export BOOT="/boot"            # install target for kernels
  53 export EXTRA=${EXTRA:=xfs-qa}
  54
  55 # general parameters (mainly for auto-qa)
  56 export SOAK_PROC=3             # -p option to fsstress
  57 export SOAK_STRESS=10000       # -n option to fsstress
  58 export SOAK_PASSES=-1          # count of repetitions of fsstress (while soaking)
  59 export EMAIL=root@localhost    # where auto-qa will send its status messages
  60 export HOST_OPTIONS=${HOST_OPTIONS:=local.config}
  61 export CHECK_OPTIONS=${CHECK_OPTIONS:="-g auto"}
  62 export BENCH_PASSES=${BENCH_PASSES:=5}
  63 export XFS_MKFS_OPTIONS=${XFS_MKFS_OPTIONS:=-bsize=4096}
  64 export TIME_FACTOR=${TIME_FACTOR:=1}
  65 export LOAD_FACTOR=${LOAD_FACTOR:=1}
  66 export DEBUGFS_MNT=${DEBUGFS_MNT:="/sys/kernel/debug"}
  67
  68 # some constants for overlayfs setup
  69 export OVL_UPPER="ovl-upper"
  70 export OVL_LOWER="ovl-lower"
  71 export OVL_WORK="ovl-work"
  72 # overlay mount point parent must be the base fs root
  73 export OVL_MNT="ovl-mnt"
  74 # By default unionmount-testsuite is expected under src
  75 export UNIONMOUNT_TESTSUITE=${UNIONMOUNT_TESTSUITE:=$here/src/unionmount-testsuite}
  76
  77 # From e2fsprogs/e2fsck/e2fsck.h:
  78 # Exit code used by fsck-type programs
  79 export FSCK_OK=0
  80 export FSCK_NONDESTRUCT=1
  81 export FSCK_REBOOT=2
  82 export FSCK_UNCORRECTED=4
  83 export FSCK_ERROR=8
  84 export FSCK_USAGE=16
  85 export FSCK_CANCELED=32
  86 export FSCK_LIBRARY=128
  87
  88 export PWD=`pwd`
  89 #export DEBUG=${DEBUG:=...} # arbitrary CFLAGS really.
  90 export MALLOCLIB=${MALLOCLIB:=/usr/lib/libefence.a}
  91 export LOCAL_CONFIGURE_OPTIONS=${LOCAL_CONFIGURE_OPTIONS:=--enable-readline=yes}
  92
  93 export RECREATE_TEST_DEV=false
  94
  95 # Handle mkfs.$fstyp which does (or does not) require -f to overwrite
  96 set_mkfs_prog_path_with_opts()
  97 {
  98         local fstyp=$1
  99         local p=$(type -P mkfs.$fstyp)
 100
 101         # Note: mkfs.f2fs doesn't support the --help option yet, but it doesn't
 102         # matter since it also prints the help when an invalid option is given.
 103         if [ "$p" != "" ] && \
 104                 $p --help |& grep -q "[[:space:]]-f[[:space:]|]"; then
 105                 echo "$p -f"
 106         else
 107                 echo $p
 108         fi
 109 }
 110
 111 _fatal()
 112 {
 113     echo "$*"
 114     status=1
 115     exit 1
 116 }
 117
 118 export MKFS_PROG="$(type -P mkfs)"
 119 [ "$MKFS_PROG" = "" ] && _fatal "mkfs not found"
 120
 121 export MOUNT_PROG="$(type -P mount)"
 122 [ "$MOUNT_PROG" = "" ] && _fatal "mount not found"
 123
 124 export UMOUNT_PROG="$(type -P umount)"
 125 [ "$UMOUNT_PROG" = "" ] && _fatal "umount not found"
 126
 127 export FSSTRESS_PROG="./ltp/fsstress"
 128 [ ! -x $FSSTRESS_PROG ] && _fatal "fsstress not found or executable"
 129
 130 export PERL_PROG="$(type -P perl)"
 131 [ "$PERL_PROG" = "" ] && _fatal "perl not found"
 132
 133 export AWK_PROG="$(type -P awk)"
 134 [ "$AWK_PROG" = "" ] && _fatal "awk not found"
 135
 136 export SED_PROG="$(type -P sed)"
 137 [ "$SED_PROG" = "" ] && _fatal "sed not found"
 138
 139 export BC_PROG="$(type -P bc)"
 140 [ "$BC_PROG" = "" ] && _fatal "bc not found"
 141
 142 export PS_ALL_FLAGS="-ef"
 143
 144 export DF_PROG="$(type -P df)"
 145 [ "$DF_PROG" = "" ] && _fatal "df not found"
 146 export DF_PROG="$DF_PROG -T -P" # Linux
 147
 148 export XFS_IO_PROG="$(type -P xfs_io)"
 149 [ "$XFS_IO_PROG" = "" ] && _fatal "xfs_io not found"
 150
 151 export MKSWAP_PROG="$(type -P mkswap)"
 152 # mkswap from util-linux v2.17.2 or older needs "-f" option to force to erase
 153 # bootbits sectors
 154 MKSWAP_PROG="$MKSWAP_PROG -f"
 155
 156 export XFS_LOGPRINT_PROG="$(type -P xfs_logprint)"
 157 export XFS_REPAIR_PROG="$(type -P xfs_repair)"
 158 export XFS_DB_PROG="$(type -P xfs_db)"
 159 export XFS_ADMIN_PROG="$(type -P xfs_admin)"
 160 export XFS_GROWFS_PROG=$(type -P xfs_growfs)
 161 export XFS_SPACEMAN_PROG="$(type -P xfs_spaceman)"
 162 export XFS_SCRUB_PROG="$(type -P xfs_scrub)"
 163 export XFS_PARALLEL_REPAIR_PROG="$(type -P xfs_prepair)"
 164 export XFS_PARALLEL_REPAIR64_PROG="$(type -P xfs_prepair64)"
 165 export __XFSDUMP_PROG="$(type -P xfsdump)"
 166 if [ -n "$__XFSDUMP_PROG" ]; then
 167         export XFSDUMP_PROG="$__XFSDUMP_PROG -e"
 168 else
 169         export XFSDUMP_PROG=""
 170 fi
 171 export XFSRESTORE_PROG="$(type -P xfsrestore)"
 172 export XFSINVUTIL_PROG="$(type -P xfsinvutil)"
 173 export GETFATTR_PROG="$(type -P getfattr)"
 174 export SETFATTR_PROG="$(type -P setfattr)"
 175 export CHACL_PROG="$(type -P chacl)"
 176 export ATTR_PROG="$(type -P attr)"
 177 export QUOTA_PROG="$(type -P quota)"
 178 export XFS_QUOTA_PROG="$(type -P xfs_quota)"
 179 export KILLALL_PROG="$(type -P killall)"
 180 export INDENT_PROG="$(type -P indent)"
 181 export XFS_COPY_PROG="$(type -P xfs_copy)"
 182 export FSTRIM_PROG="$(type -P fstrim)"
 183 export DUMPE2FS_PROG="$(type -P dumpe2fs)"
 184 export RESIZE2FS_PROG="$(type -P resize2fs)"
 185 export F2FS_IO_PROG="$(type -P f2fs_io)"
 186 export FIO_PROG="$(type -P fio)"
 187 export FILEFRAG_PROG="$(type -P filefrag)"
 188 export E4DEFRAG_PROG="$(type -P e4defrag)"
 189 export LOGGER_PROG="$(type -P logger)"
 190 export DBENCH_PROG="$(type -P dbench)"
 191 export DMSETUP_PROG="$(type -P dmsetup)"
 192 export WIPEFS_PROG="$(type -P wipefs)"
 193 export BLKDISCARD_PROG="$(type -P blkdiscard)"
 194 export DUMP_PROG="$(type -P dump)"
 195 export RESTORE_PROG="$(type -P restore)"
 196 export LVM_PROG="$(type -P lvm)"
 197 export LSATTR_PROG="$(type -P lsattr)"
 198 export CHATTR_PROG="$(type -P chattr)"
 199 export DEBUGFS_PROG="$(type -P debugfs)"
 200 export UUIDGEN_PROG="$(type -P uuidgen)"
 201 export GETRICHACL_PROG="$(type -P getrichacl)"
 202 export SETRICHACL_PROG="$(type -P setrichacl)"
 203 export KEYCTL_PROG="$(type -P keyctl)"
 204 export XZ_PROG="$(type -P xz)"
 205 export FLOCK_PROG="$(type -P flock)"
 206 export LDD_PROG="$(type -P ldd)"
 207 export TIMEOUT_PROG="$(type -P timeout)"
 208 export MAN_PROG="$(type -P man)"
 209 export NFS4_SETFACL_PROG="$(type -P nfs4_setfacl)"
 210 export NFS4_GETFACL_PROG="$(type -P nfs4_getfacl)"
 211 export UBIUPDATEVOL_PROG="$(type -P ubiupdatevol)"
 212 export THIN_CHECK_PROG="$(type -P thin_check)"
 213 export PYTHON2_PROG="$(type -P python2)"
 214 export SQLITE3_PROG="$(type -P sqlite3)"
 215 export TIMEOUT_PROG="$(type -P timeout)"
 216 export SETCAP_PROG="$(type -P setcap)"
 217 export GETCAP_PROG="$(type -P getcap)"
 218 export CAPSH_PROG="$(type -P capsh)"
 219 export CHECKBASHISMS_PROG="$(type -P checkbashisms)"
 220 export XFS_INFO_PROG="$(type -P xfs_info)"
 221 export DUPEREMOVE_PROG="$(type -P duperemove)"
 222 export CC_PROG="$(type -P cc)"
 223 export FSVERITY_PROG="$(type -P fsverity)"
 224 export OPENSSL_PROG="$(type -P openssl)"
 225 export ACCTON_PROG="$(type -P accton)"
 226
 227 # use 'udevadm settle' or 'udevsettle' to wait for lv to be settled.
 228 # newer systems have udevadm command but older systems like RHEL5 don't.
 229 # But if neither one is available, just set it to "sleep 1" to wait for lv to
 230 # be settled
 231 UDEV_SETTLE_PROG="$(type -P udevadm)"
 232 if [ "$UDEV_SETTLE_PROG" == "" ]; then
 233         # try udevsettle command
 234         UDEV_SETTLE_PROG="$(type -P udevsettle)"
 235 else
 236         # udevadm is available, add 'settle' as subcommand
 237         UDEV_SETTLE_PROG="$UDEV_SETTLE_PROG settle"
 238 fi
 239 # neither command is available, use sleep 1
 240 if [ "$UDEV_SETTLE_PROG" == "" ]; then
 241         UDEV_SETTLE_PROG="sleep 1"
 242 fi
 243 export UDEV_SETTLE_PROG
 244
 245 export MKFS_XFS_PROG=$(type -P mkfs.xfs)
 246 export MKFS_EXT4_PROG=$(type -P mkfs.ext4)
 247 export MKFS_UDF_PROG=$(type -P mkudffs)
 248 export MKFS_BTRFS_PROG=$(set_mkfs_prog_path_with_opts btrfs)
 249 export MKFS_F2FS_PROG=$(set_mkfs_prog_path_with_opts f2fs)
 250 export DUMP_F2FS_PROG=$(type -P dump.f2fs)
 251 export F2FS_IO_PROG=$(type -P f2fs_io)
 252 export BTRFS_UTIL_PROG=$(type -P btrfs)
 253 export BTRFS_SHOW_SUPER_PROG=$(type -P btrfs-show-super)
 254 export BTRFS_CONVERT_PROG=$(type -P btrfs-convert)
 255 export BTRFS_TUNE_PROG=$(type -P btrfstune)
 256 export XFS_FSR_PROG=$(type -P xfs_fsr)
 257 export MKFS_NFS_PROG="false"
 258 export MKFS_CIFS_PROG="false"
 259 export MKFS_OVERLAY_PROG="false"
 260 export MKFS_REISER4_PROG=$(type -P mkfs.reiser4)
 261 export E2FSCK_PROG=$(type -P e2fsck)
 262 export TUNE2FS_PROG=$(type -P tune2fs)
 263 export FSCK_OVERLAY_PROG=$(type -P fsck.overlay)
 264
 265 # SELinux adds extra xattrs which can mess up our expected output.
 266 # So, mount with a context, and they won't be created.
 267 #
 268 # Since the context= option only accepts contexts defined in the SELinux
 269 # policy, and different systems may have different policies with
 270 # different context names, use the context of an existing directory.
 271 # Assume that any valid context is fine, since xfstests should really
 272 # only be run from an "unconfined" process, or with SELinux in permissive
 273 # mode.  But if not, just specify your own SELINUX_MOUNT_OPTIONS.
 274 if [ -x /usr/sbin/selinuxenabled ] && /usr/sbin/selinuxenabled; then
 275         : ${SELINUX_MOUNT_OPTIONS:="-o context=$(stat -c %C /)"}
 276         export SELINUX_MOUNT_OPTIONS
 277 fi
 278
 279 # check if mkfs.xfs supports v5 xfs
 280 if [ "$FSTYP" == "xfs" ]; then
 281         XFS_MKFS_HAS_NO_META_SUPPORT=""
 282         touch /tmp/crc_check.img
 283         $MKFS_XFS_PROG -N -d file,name=/tmp/crc_check.img,size=32m -m crc=0 \
 284                 >/dev/null 2>&1;
 285         if [ $? -ne 0 ]; then
 286                 XFS_MKFS_HAS_NO_META_SUPPORT=true
 287         fi
 288         rm -f /tmp/crc_check.img
 289         export XFS_MKFS_HAS_NO_META_SUPPORT
 290 fi
 291
 292 _mount_opts()
 293 {
 294         case $FSTYP in
 295         9p)
 296                 export MOUNT_OPTIONS=$PLAN9_MOUNT_OPTIONS
 297                 ;;
 298         xfs)
 299                 export MOUNT_OPTIONS=$XFS_MOUNT_OPTIONS
 300                 ;;
 301         udf)
 302                 export MOUNT_OPTIONS=$UDF_MOUNT_OPTIONS
 303                 ;;
 304         nfs)
 305                 export MOUNT_OPTIONS=$NFS_MOUNT_OPTIONS
 306                 ;;
 307         cifs)
 308                 export MOUNT_OPTIONS=$CIFS_MOUNT_OPTIONS
 309                 ;;
 310         ceph)
 311                 export MOUNT_OPTIONS=$CEPHFS_MOUNT_OPTIONS
 312                 ;;
 313         glusterfs)
 314                 export MOUNT_OPTIONS=$GLUSTERFS_MOUNT_OPTIONS
 315                 ;;
 316         overlay)
 317                 export MOUNT_OPTIONS=$OVERLAY_MOUNT_OPTIONS
 318                 ;;
 319         ext2|ext3|ext4|ext4dev)
 320                 # acls & xattrs aren't turned on by default on ext$FOO
 321                 export MOUNT_OPTIONS="-o acl,user_xattr $EXT_MOUNT_OPTIONS"
 322                 ;;
 323         f2fs)
 324                 export MOUNT_OPTIONS="-o acl,user_xattr $F2FS_MOUNT_OPTIONS"
 325                 ;;
 326         reiserfs)
 327                 # acls & xattrs aren't turned on by default on reiserfs
 328                 export MOUNT_OPTIONS="-o acl,user_xattr $REISERFS_MOUNT_OPTIONS"
 329                 ;;
 330        reiser4)
 331                # acls & xattrs aren't supported by reiser4
 332                export MOUNT_OPTIONS=$REISER4_MOUNT_OPTIONS
 333                ;;
 334         gfs2)
 335                 # acls aren't turned on by default on gfs2
 336                 export MOUNT_OPTIONS="-o acl $GFS2_MOUNT_OPTIONS"
 337                 ;;
 338         tmpfs)
 339                 # We need to specify the size at mount, use 1G by default
 340                 export MOUNT_OPTIONS="-o size=1G $TMPFS_MOUNT_OPTIONS"
 341                 ;;
 342         ubifs)
 343                 export MOUNT_OPTIONS=$UBIFS_MOUNT_OPTIONS
 344                 ;;
 345         *)
 346                 ;;
 347         esac
 348 }
 349
 350 _test_mount_opts()
 351 {
 352         case $FSTYP in
 353         9p)
 354                 export TEST_FS_MOUNT_OPTS=$PLAN9_MOUNT_OPTIONS
 355                 ;;
 356         cifs)
 357                 export TEST_FS_MOUNT_OPTS=$CIFS_MOUNT_OPTIONS
 358                 ;;
 359         ceph)
 360                 export TEST_FS_MOUNT_OPTS=$CEPHFS_MOUNT_OPTIONS
 361                 ;;
 362         nfs)
 363                 export TEST_FS_MOUNT_OPTS=$NFS_MOUNT_OPTIONS
 364                 ;;
 365         glusterfs)
 366                 export TEST_FS_MOUNT_OPTS=$GLUSTERFS_MOUNT_OPTIONS
 367                 ;;
 368         ext2|ext3|ext4|ext4dev)
 369                 # acls & xattrs aren't turned on by default on older ext$FOO
 370                 export TEST_FS_MOUNT_OPTS="-o acl,user_xattr $EXT_MOUNT_OPTIONS"
 371                 ;;
 372         *)
 373                 ;;
 374         esac
 375 }
 376
 377 _mkfs_opts()
 378 {
 379         case $FSTYP in
 380         xfs)
 381                 export MKFS_OPTIONS=$XFS_MKFS_OPTIONS
 382                 ;;
 383         udf)
 384                 [ ! -z "$udf_fsize" ] && \
 385                         UDF_MKFS_OPTIONS="$UDF_MKFS_OPTIONS -s $udf_fsize"
 386                 export MKFS_OPTIONS=$UDF_MKFS_OPTIONS
 387                 ;;
 388         nfs)
 389                 export MKFS_OPTIONS=$NFS_MKFS_OPTIONS
 390                 ;;
 391         cifs)
 392                 export MKFS_OPTIONS=$CIFS_MKFS_OPTIONS
 393                 ;;
 394         ceph)
 395                 export MKFS_OPTIONS=$CEPHFS_MKFS_OPTIONS
 396                 ;;
 397         reiserfs)
 398                 export MKFS_OPTIONS="$REISERFS_MKFS_OPTIONS -q"
 399                 ;;
 400        reiser4)
 401                 export MKFS_OPTIONS=$REISER4_MKFS_OPTIONS
 402                 ;;
 403         gfs2)
 404                 export MKFS_OPTIONS="$GFS2_MKFS_OPTIONS -O -p lock_nolock"
 405                 ;;
 406         jfs)
 407                 export MKFS_OPTIONS="$JFS_MKFS_OPTIONS -q"
 408                 ;;
 409         f2fs)
 410                 export MKFS_OPTIONS="$F2FS_MKFS_OPTIONS"
 411                 ;;
 412         *)
 413                 ;;
 414         esac
 415 }
 416
 417 _fsck_opts()
 418 {
 419         case $FSTYP in
 420         ext2|ext3|ext4|ext4dev)
 421                 export FSCK_OPTIONS="-nf"
 422                 ;;
 423         reiser*)
 424                 export FSCK_OPTIONS="--yes"
 425                 ;;
 426         f2fs)
 427                 export FSCK_OPTIONS=""
 428                 ;;
 429         *)
 430                 export FSCK_OPTIONS="-n"
 431                 ;;
 432         esac
 433 }
 434
 435 known_hosts()
 436 {
 437         [ "$HOST_CONFIG_DIR" ] || HOST_CONFIG_DIR=`pwd`/configs
 438
 439         [ -f /etc/xfsqa.config ]             && export HOST_OPTIONS=/etc/xfsqa.config
 440         [ -f $HOST_CONFIG_DIR/$HOST ]        && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST
 441         [ -f $HOST_CONFIG_DIR/$HOST.config ] && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST.config
 442 }
 443
 444 # Returns a list of sections in config file
 445 # Each section starts with the section name in the format
 446 # [section_name1]. Only alphanumeric characters and '_' is allowed
 447 # in the section name otherwise the section will not be resognised.
 448 # Section name must be contained between square brackets.
 449 get_config_sections() {
 450         sed -n -e "s/^\[\([[:alnum:]_-]*\)\]/\1/p" < $1
 451 }
 452
 453 if [ ! -f "$HOST_OPTIONS" ]; then
 454         known_hosts
 455 fi
 456
 457 export HOST_OPTIONS_SECTIONS="-no-sections-"
 458 export OPTIONS_HAVE_SECTIONS=false
 459 if [ -f "$HOST_OPTIONS" ]; then
 460         export HOST_OPTIONS_SECTIONS=`get_config_sections $HOST_OPTIONS`
 461         if [ -z "$HOST_OPTIONS_SECTIONS" ]; then
 462                 . $HOST_OPTIONS
 463                 export HOST_OPTIONS_SECTIONS="-no-sections-"
 464         else
 465                 export OPTIONS_HAVE_SECTIONS=true
 466         fi
 467 fi
 468
 469 _check_device()
 470 {
 471         local name=$1
 472         local dev_needed=$2
 473         local dev=$3
 474
 475         if [ -z "$dev" ]; then
 476                 if [ "$dev_needed" == "required" ]; then
 477                         _fatal "common/config: $name is required but not defined!"
 478                 fi
 479                 return 0
 480         fi
 481
 482         if [ -b "$dev" ] || ( echo $dev | grep -qE ":|//" ); then
 483                 # block device or a network url
 484                 return 0
 485         fi
 486
 487         case "$FSTYP" in
 488         9p|tmpfs|virtiofs)
 489                 # 9p and virtiofs mount tags are just plain strings, so anything is allowed
 490                 # tmpfs doesn't use mount source, ignore
 491                 ;;
 492         overlay)
 493                 if [ ! -d "$dev" ]; then
 494                         _fatal "common/config: $name ($dev) is not a directory for overlay"
 495                 fi
 496                 ;;
 497         ubifs)
 498                 if [ ! -c "$dev" ]; then
 499                         _fatal "common/config: $name ($dev) is not a character device"
 500                 fi
 501                 ;;
 502         *)
 503                 _fatal "common/config: $name ($dev) is not a block device or a network filesystem"
 504         esac
 505 }
 506
 507 # check and return a canonical mount point path
 508 _canonicalize_mountpoint()
 509 {
 510         local name=$1
 511         local dir=$2
 512
 513         if [ -d "$dir" ]; then
 514                 # this follows symlinks and removes all trailing "/"s
 515                 readlink -e "$dir"
 516                 return 0
 517         fi
 518
 519         if [ "$FSTYP" != "overlay" ] || [[ "$name" == OVL_BASE_* ]]; then
 520                 _fatal "common/config: $name ($dir) is not a directory"
 521         fi
 522
 523         # base fs may not be mounted yet, so just check that parent dir
 524         # exists (where base fs will be mounted) because we are going to
 525         # mkdir the overlay mount point dir anyway
 526         local base=`basename $dir`
 527         local parent=`dirname $dir`
 528         parent=`_canonicalize_mountpoint OVL_BASE_$name "$parent"`
 529
 530         # prepend the overlay mount point to canonical parent path
 531         echo "$parent/$base"
 532 }
 533
 534 # On check -overlay, for the non multi section config case, this
 535 # function is called on every test, before init_rc().
 536 # When SCRATCH/TEST_* vars are defined in config file, config file
 537 # is sourced on every test and this function overrides the vars
 538 # every time.
 539 # When SCRATCH/TEST_* vars are defined in evironment and not
 540 # in config file, this function is called after vars have already
 541 # been overriden in the previous test.
 542 # In that case, TEST_DEV is a directory and not a blockdev/chardev and
 543 # the function will return without overriding the SCRATCH/TEST_* vars.
 544 _overlay_config_override()
 545 {
 546         # There are 2 options for configuring overlayfs tests:
 547         #
 548         # 1. (legacy) SCRATCH/TEST_DEV point to existing directories
 549         #    on an already mounted fs.  In this case, the new
 550         #    OVL_BASE_SCRATCH/TEST_* vars are set to use the legacy
 551         #    vars values (even though they may not be mount points).
 552         #
 553         [ ! -d "$TEST_DEV" ] || export OVL_BASE_TEST_DIR="$TEST_DEV"
 554         [ ! -d "$SCRATCH_DEV" ] || export OVL_BASE_SCRATCH_MNT="$SCRATCH_DEV"
 555
 556         # 2. SCRATCH/TEST_DEV point to the base fs partitions.  In this case,
 557         #    the new OVL_BASE_SCRATCH/TEST_DEV/MNT vars are set to the values
 558         #    of the configured base fs and SCRATCH/TEST_DEV vars are set to the
 559         #    overlayfs base and mount dirs inside base fs mount.
 560         [ -b "$TEST_DEV" ] || [ -c "$TEST_DEV" ] || return 0
 561
 562         # Config file may specify base fs type, but we obay -overlay flag
 563         [ "$FSTYP" == overlay ] || export OVL_BASE_FSTYP="$FSTYP"
 564         export FSTYP=overlay
 565
 566         # Store original base fs vars
 567         export OVL_BASE_TEST_DEV="$TEST_DEV"
 568         export OVL_BASE_TEST_DIR="$TEST_DIR"
 569         # If config does not set MOUNT_OPTIONS, its value may be
 570         # leftover from previous _overlay_config_override, so
 571         # don't use that value for base fs mount
 572         [ "$MOUNT_OPTIONS" != "$OVERLAY_MOUNT_OPTIONS" ] || unset MOUNT_OPTIONS
 573         export OVL_BASE_MOUNT_OPTIONS="$MOUNT_OPTIONS"
 574
 575         # Set TEST vars to overlay base and mount dirs inside base fs
 576         export TEST_DEV="$OVL_BASE_TEST_DIR"
 577         export TEST_DIR="$OVL_BASE_TEST_DIR/$OVL_MNT"
 578         export MOUNT_OPTIONS="$OVERLAY_MOUNT_OPTIONS"
 579
 580         [ -b "$SCRATCH_DEV" ] || [ -c "$SCRATCH_DEV" ] || return 0
 581
 582         # Store original base fs vars
 583         export OVL_BASE_SCRATCH_DEV="$SCRATCH_DEV"
 584         export OVL_BASE_SCRATCH_MNT="$SCRATCH_MNT"
 585
 586         # Set SCRATCH vars to overlay base and mount dirs inside base fs
 587         export SCRATCH_DEV="$OVL_BASE_SCRATCH_MNT"
 588         export SCRATCH_MNT="$OVL_BASE_SCRATCH_MNT/$OVL_MNT"
 589
 590         # Set fsck options, use default if user not set directly.
 591         export FSCK_OPTIONS="$OVERLAY_FSCK_OPTIONS"
 592         [ -z "$FSCK_OPTIONS" ] && _fsck_opts
 593 }
 594
 595 _overlay_config_restore()
 596 {
 597         export OVERLAY=true
 598         [ -z "$OVL_BASE_FSTYP" ] || export FSTYP=$OVL_BASE_FSTYP
 599         [ -z "$OVL_BASE_TEST_DEV" ] || export TEST_DEV=$OVL_BASE_TEST_DEV
 600         [ -z "$OVL_BASE_TEST_DIR" ] || export TEST_DIR=$OVL_BASE_TEST_DIR
 601         [ -z "$OVL_BASE_SCRATCH_DEV" ] || export SCRATCH_DEV=$OVL_BASE_SCRATCH_DEV
 602         [ -z "$OVL_BASE_SCRATCH_MNT" ] || export SCRATCH_MNT=$OVL_BASE_SCRATCH_MNT
 603         [ -z "$OVL_BASE_MOUNT_OPTIONS" ] || export MOUNT_OPTIONS=$OVL_BASE_MOUNT_OPTIONS
 604 }
 605
 606 # Parse config section options. This function will parse all the configuration
 607 # within a single section which name is passed as an argument. For section
 608 # name format see comments in get_config_sections().
 609 # Empty lines and everything after '#' will be ignored.
 610 # Configuration options should be defined in the format
 611 #
 612 # CONFIG_OPTION=value
 613 #
 614 # This 'CONFIG_OPTION' variable and will be exported as an environment variable.
 615 parse_config_section() {
 616         SECTION=$1
 617         if ! $OPTIONS_HAVE_SECTIONS; then
 618                 return 0
 619         fi
 620         eval `sed -e 's/[[:space:]]*\=[[:space:]]*/=/g' \
 621                 -e 's/#.*$//' \
 622                 -e 's/[[:space:]]*$//' \
 623                 -e 's/^[[:space:]]*//' \
 624                 -e "s/^\([^=]*\)=\"\?'\?\([^\"']*\)\"\?'\?$/export \1=\"\2\"/" \
 625                 < $HOST_OPTIONS \
 626                 | sed -n -e "/^\[$SECTION\]/,/^\s*\[/{/^[^#].*\=.*/p;}"`
 627 }
 628
 629 get_next_config() {
 630         if [ ! -z "$CONFIG_INCLUDED" ] && ! $OPTIONS_HAVE_SECTIONS; then
 631                 return 0
 632         fi
 633
 634         # We might have overriden FSTYP and TEST/SCRATCH vars with overlay values
 635         # in the previous section, so restore them to original values stored in
 636         # OVL_BASE_*.
 637         # We need to do this *before* old FSTYP and MOUNT_OPTIONS are recorded
 638         # and *before* SCRATCH_DEV and MOUNT_OPTIONS are unset
 639         if [ "$FSTYP" == "overlay" ]; then
 640                 _overlay_config_restore
 641         fi
 642
 643         local OLD_FSTYP=$FSTYP
 644         local OLD_MOUNT_OPTIONS=$MOUNT_OPTIONS
 645         local OLD_TEST_FS_MOUNT_OPTS=$TEST_FS_MOUNT_OPTS
 646         local OLD_MKFS_OPTIONS=$MKFS_OPTIONS
 647         local OLD_FSCK_OPTIONS=$FSCK_OPTIONS
 648         local OLD_USE_EXTERNAL=$USE_EXTERNAL
 649
 650         unset MOUNT_OPTIONS
 651         unset TEST_FS_MOUNT_OPTS
 652         unset MKFS_OPTIONS
 653         unset FSCK_OPTIONS
 654         unset USE_EXTERNAL
 655
 656         # We might have deduced SCRATCH_DEV from the SCRATCH_DEV_POOL in the previous
 657         # run, so we have to unset it now.
 658         if [ "$SCRATCH_DEV_NOT_SET" == "true" ]; then
 659                 unset SCRATCH_DEV
 660         fi
 661
 662         parse_config_section $1
 663
 664         if [ ! -z "$OLD_FSTYP" ] && [ $OLD_FSTYP != $FSTYP ]; then
 665                 [ -z "$MOUNT_OPTIONS" ] && _mount_opts
 666                 [ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
 667                 [ -z "$MKFS_OPTIONS" ] && _mkfs_opts
 668                 [ -z "$FSCK_OPTIONS" ] && _fsck_opts
 669
 670                 # clear the external devices if we are not using them
 671                 if [ -z "$USE_EXTERNAL" ]; then
 672                         unset TEST_RTDEV
 673                         unset TEST_LOGDEV
 674                         unset SCRATCH_RTDEV
 675                         unset SCRATCH_LOGDEV
 676                 fi
 677         else
 678                 [ -z "$MOUNT_OPTIONS" ] && export MOUNT_OPTIONS=$OLD_MOUNT_OPTIONS
 679                 [ -z "$TEST_FS_MOUNT_OPTS" ] && export TEST_FS_MOUNT_OPTS=$OLD_TEST_FS_MOUNT_OPTS
 680                 [ -z "$MKFS_OPTIONS" ] && export MKFS_OPTIONS=$OLD_MKFS_OPTIONS
 681                 [ -z "$FSCK_OPTIONS" ] && export FSCK_OPTIONS=$OLD_FSCK_OPTIONS
 682                 [ -z "$USE_EXTERNAL" ] && export USE_EXTERNAL=$OLD_USE_EXTERNAL
 683         fi
 684
 685         # set default RESULT_BASE
 686         if [ -z "$RESULT_BASE" ]; then
 687                 export RESULT_BASE="$here/results/"
 688         fi
 689
 690         if [ "$FSTYP" == "tmpfs" ]; then
 691                 if [ -z "TEST_DEV" ]; then
 692                         export TEST_DEV=tmpfs_test
 693                 fi
 694                 if [ -z "SCRATCH_DEV" ]; then
 695                         export TEST_DEV=tmpfs_scratch
 696                 fi
 697         fi
 698
 699         #  Mandatory Config values.
 700         MC=""
 701         [ -z "$EMAIL" ]          && MC="$MC EMAIL"
 702         [ -z "$TEST_DIR" ]       && MC="$MC TEST_DIR"
 703         [ -z "$TEST_DEV" ]       && MC="$MC TEST_DEV"
 704
 705         if [ -n "$MC" ]; then
 706                 echo "Warning: need to define parameters for host $HOST"
 707                 echo "       or set variables:"
 708                 echo "       $MC"
 709                 exit 1
 710         fi
 711
 712         _check_device TEST_DEV required $TEST_DEV
 713         export TEST_DIR=`_canonicalize_mountpoint TEST_DIR $TEST_DIR`
 714
 715         # a btrfs tester will set only SCRATCH_DEV_POOL, we will put first of its dev
 716         # to SCRATCH_DEV and rest to SCRATCH_DEV_POOL to maintain the backward compatibility
 717         if [ ! -z "$SCRATCH_DEV_POOL" ]; then
 718                 if [ ! -z "$SCRATCH_DEV" ]; then
 719                         echo "common/config: Error: \$SCRATCH_DEV ($SCRATCH_DEV) should be unset when \$SCRATCH_DEV_POOL ($SCRATCH_DEV_POOL) is set"
 720                         exit 1
 721                 fi
 722                 SCRATCH_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'`
 723                 export SCRATCH_DEV
 724                 export SCRATCH_DEV_NOT_SET=true
 725         fi
 726
 727         _check_device SCRATCH_DEV optional $SCRATCH_DEV
 728         export SCRATCH_MNT=`_canonicalize_mountpoint SCRATCH_MNT $SCRATCH_MNT`
 729
 730         if [ -n "$USE_EXTERNAL" ]; then
 731                 _check_device TEST_RTDEV optional $TEST_RTDEV
 732                 _check_device TEST_LOGDEV optional $TEST_LOGDEV
 733                 _check_device SCRATCH_RTDEV optional $SCRATCH_RTDEV
 734                 _check_device SCRATCH_LOGDEV optional $SCRATCH_LOGDEV
 735         fi
 736
 737         # Override FSTYP from config when running ./check -overlay
 738         # and maybe override base fs TEST/SCRATCH_DEV with overlay base dirs.
 739         # We need to do this *after* default mount options are set by base FSTYP
 740         # and *after* SCRATCH_DEV is deduced from SCRATCH_DEV_POOL
 741         if [ "$OVERLAY" == "true" -o "$FSTYP" == "overlay" ]; then
 742                 _overlay_config_override
 743         fi
 744 }
 745
 746 if [ -z "$CONFIG_INCLUDED" ]; then
 747         get_next_config `echo $HOST_OPTIONS_SECTIONS | cut -f1 -d" "`
 748         export CONFIG_INCLUDED=true
 749
 750         # Autodetect fs type based on what's on $TEST_DEV unless it's been set
 751         # externally
 752         if [ -z "$FSTYP" ] && [ ! -z "$TEST_DEV" ]; then
 753                 FSTYP=`blkid -c /dev/null -s TYPE -o value $TEST_DEV`
 754         fi
 755         FSTYP=${FSTYP:=xfs}
 756         export FSTYP
 757         [ -z "$MOUNT_OPTIONS" ] && _mount_opts
 758         [ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
 759         [ -z "$MKFS_OPTIONS" ] && _mkfs_opts
 760         [ -z "$FSCK_OPTIONS" ] && _fsck_opts
 761 else
 762         # We get here for the non multi section case, on every test that sources
 763         # common/rc after re-sourcing the HOST_OPTIONS config file.
 764         # Because of this re-sourcing, we need to re-canonicalize the configured
 765         # mount points and re-override TEST/SCRATCH_DEV overlay vars.
 766
 767         # canonicalize the mount points
 768         # this follows symlinks and removes all trailing "/"s
 769         export TEST_DIR=`_canonicalize_mountpoint TEST_DIR $TEST_DIR`
 770         export SCRATCH_MNT=`_canonicalize_mountpoint SCRATCH_MNT $SCRATCH_MNT`
 771
 772         # Override FSTYP from config when running ./check -overlay
 773         # and maybe override base fs TEST/SCRATCH_DEV with overlay base dirs
 774         if [ "$OVERLAY" == "true" -o "$FSTYP" == "overlay" ]; then
 775                 _overlay_config_override
 776         fi
 777 fi
 778
 779 # make sure this script returns success
 780 /bin/true