[xfstests-dev.git] / common / config

##/bin/bash
#
# Copyright (c) 2000-2003,2006 Silicon Graphics, Inc.  All Rights Reserved.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it would be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write the Free Software Foundation,
# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
#
#
# setup and check for config parameters, and in particular
#
# EMAIL -           email of the script runner.
# TEST_DIR -        scratch test directory that is in an already
#                   mounted XFS file system, needs to be be world
#                   writeable
# TEST_DEV -        device for file system containing TEST_DIR
#
# and optionally:
# SCRATCH_DEV -     device you can make a scratch file system on
# SCRATCH_MNT -     mount point for scratch file system
# SCRATCH_LOGDEV -  scratch log device for external log testing
# SCRATCH_RTDEV -   scratch rt dev
# TEST_LOGDEV -     test log device for external log testing
# TEST_RTDEV -      test rt dev
# TAPE_DEV -        the tape device for the xfsdump tests
# RMT_TAPE_DEV -    the remote tape device for the xfsdump tests
# RMT_IRIXTAPE_DEV- the IRIX remote tape device for the xfsdump tests
# RMT_TAPE_USER -   remote user for tape device
# SELINUX_MOUNT_OPTIONS - Options to use when SELinux is enabled.
#
# - These can be added to $HOST_CONFIG_DIR (witch default to ./config)
#   below or a separate local configuration file can be used (using
#   the HOST_OPTIONS variable).
# - This script is shared by the stress test system and the auto-qa
#   system
# - TEST_DEV & TEST_DIR must be assigned.
# - this script shouldn't make any assertions about filesystem
#   validity or mountedness.
#

# all tests should use a common language setting to prevent golden
# output mismatches.
export LANG=C
export LC_ALL=C

PATH=".:$PATH"

export HOST=`hostname -s`
export HOSTOS=`uname -s`

export MODULAR=0               # using XFS as a module or not
export BOOT="/boot"            # install target for kernels
export EXTRA=${EXTRA:=xfs-qa}

# general parameters (mainly for auto-qa)
export SOAK_PROC=3             # -p option to fsstress
export SOAK_STRESS=10000       # -n option to fsstress
export SOAK_PASSES=-1          # count of repetitions of fsstress (while soaking)
export EMAIL=root@localhost    # where auto-qa will send its status messages
export HOST_OPTIONS=${HOST_OPTIONS:=local.config}
export CHECK_OPTIONS=${CHECK_OPTIONS:="-g auto"}
export BENCH_PASSES=${BENCH_PASSES:=5}
export XFS_MKFS_OPTIONS=${XFS_MKFS_OPTIONS:=-bsize=4096}
export TIME_FACTOR=${TIME_FACTOR:=1}
export LOAD_FACTOR=${LOAD_FACTOR:=1}
export DEBUGFS_MNT=${DEBUGFS_MNT:="/sys/kernel/debug"}

# some constants for overlayfs setup
export OVL_UPPER="ovl-upper"
export OVL_LOWER="ovl-lower"
export OVL_WORK="ovl-work"
# overlay mount point parent must be the base fs root
export OVL_MNT="ovl-mnt"

export PWD=`pwd`
#export DEBUG=${DEBUG:=...} # arbitrary CFLAGS really.
export MALLOCLIB=${MALLOCLIB:=/usr/lib/libefence.a}
export LOCAL_CONFIGURE_OPTIONS=${LOCAL_CONFIGURE_OPTIONS:=--enable-readline=yes}

export RECREATE_TEST_DEV=false

# $1 = prog to look for
set_prog_path()
{
        type -P $1
}

# Handle mkfs.btrfs which does (or does not) require -f to overwrite
set_btrfs_mkfs_prog_path_with_opts()
{
        p=`set_prog_path mkfs.btrfs`
        if [ "$p" != "" ] && grep -q 'force overwrite' $p; then
                echo "$p -f"
        else
                echo $p
        fi
}

_fatal()
{
    echo "$*"
    status=1
    exit 1
}

export MKFS_PROG="`set_prog_path mkfs`"
[ "$MKFS_PROG" = "" ] && _fatal "mkfs not found"

export MOUNT_PROG="`set_prog_path mount`"
[ "$MOUNT_PROG" = "" ] && _fatal "mount not found"

export UMOUNT_PROG="`set_prog_path umount`"
[ "$UMOUNT_PROG" = "" ] && _fatal "umount not found"

export FSSTRESS_PROG="./ltp/fsstress"
[ ! -x $FSSTRESS_PROG ] && _fatal "fsstress not found or executable"

export PERL_PROG="`set_prog_path perl`"
[ "$PERL_PROG" = "" ] && _fatal "perl not found"

export AWK_PROG="`set_prog_path awk`"
[ "$AWK_PROG" = "" ] && _fatal "awk not found"

export SED_PROG="`set_prog_path sed`"
[ "$SED_PROG" = "" ] && _fatal "sed not found"

export BC_PROG="`set_prog_path bc`"
[ "$BC_PROG" = "" ] && _fatal "bc not found"

export PS_ALL_FLAGS="-ef"

export DF_PROG="`set_prog_path df`"
[ "$DF_PROG" = "" ] && _fatal "df not found"
[ "$HOSTOS" = "Linux" ] && export DF_PROG="$DF_PROG -T -P"

export XFS_IO_PROG="`set_prog_path xfs_io`"
[ "$XFS_IO_PROG" = "" ] && _fatal "xfs_io not found"

export XFS_LOGPRINT_PROG="`set_prog_path xfs_logprint`"
export XFS_REPAIR_PROG="`set_prog_path xfs_repair`"
export XFS_DB_PROG="`set_prog_path xfs_db`"
export XFS_GROWFS_PROG=`set_prog_path xfs_growfs`
export XFS_SPACEMAN_PROG="`set_prog_path xfs_spaceman`"
export XFS_SCRUB_PROG="`set_prog_path xfs_scrub`"
export XFS_PARALLEL_REPAIR_PROG="`set_prog_path xfs_prepair`"
export XFS_PARALLEL_REPAIR64_PROG="`set_prog_path xfs_prepair64`"
export __XFSDUMP_PROG="`set_prog_path xfsdump`"
if [ -n "$__XFSDUMP_PROG" ]; then
        export XFSDUMP_PROG="$__XFSDUMP_PROG -e"
else
        export XFSDUMP_PROG=""
fi
export XFSRESTORE_PROG="`set_prog_path xfsrestore`"
export XFSINVUTIL_PROG="`set_prog_path xfsinvutil`"
export GETFATTR_PROG="`set_prog_path getfattr`"
export SETFATTR_PROG="`set_prog_path setfattr`"
export CHACL_PROG="`set_prog_path chacl`"
export ATTR_PROG="`set_prog_path attr`"
export QUOTA_PROG="`set_prog_path quota`"
export XFS_QUOTA_PROG="`set_prog_path xfs_quota`"
export KILLALL_PROG="`set_prog_path killall`"
export INDENT_PROG="`set_prog_path indent`"
export XFS_COPY_PROG="`set_prog_path xfs_copy`"
export FSTRIM_PROG="`set_prog_path fstrim`"
export DUMPE2FS_PROG="`set_prog_path dumpe2fs`"
export FIO_PROG="`set_prog_path fio`"
export FILEFRAG_PROG="`set_prog_path filefrag`"
export E4DEFRAG_PROG="`set_prog_path e4defrag`"
export LOGGER_PROG="`set_prog_path logger`"
export DBENCH_PROG="`set_prog_path dbench`"
export DMSETUP_PROG="`set_prog_path dmsetup`"
export WIPEFS_PROG="`set_prog_path wipefs`"
export DUMP_PROG="`set_prog_path dump`"
export RESTORE_PROG="`set_prog_path restore`"
export LVM_PROG="`set_prog_path lvm`"
export CHATTR_PROG="`set_prog_path chattr`"
export DEBUGFS_PROG="`set_prog_path debugfs`"
export UUIDGEN_PROG="`set_prog_path uuidgen`"
export GETRICHACL_PROG="`set_prog_path getrichacl`"
export SETRICHACL_PROG="`set_prog_path setrichacl`"
export KEYCTL_PROG="`set_prog_path keyctl`"
export XZ_PROG="`set_prog_path xz`"
export FLOCK_PROG="`set_prog_path flock`"
export LDD_PROG="`set_prog_path ldd`"
export TIMEOUT_PROG="`set_prog_path timeout`"
export MAN_PROG="`set_prog_path man`"
export NFS4_SETFACL_PROG="`set_prog_path nfs4_setfacl`"
export NFS4_GETFACL_PROG="`set_prog_path nfs4_getfacl`"
export UBIUPDATEVOL_PROG="`set_prog_path ubiupdatevol`"
export THIN_CHECK_PROG="$(set_prog_path thin_check)"
export PYTHON2_PROG="`set_prog_path python2`"
export SQLITE3_PROG="`set_prog_path sqlite3`"

# use 'udevadm settle' or 'udevsettle' to wait for lv to be settled.
# newer systems have udevadm command but older systems like RHEL5 don't.
# But if neither one is available, just set it to "sleep 1" to wait for lv to
# be settled
UDEV_SETTLE_PROG="`set_prog_path udevadm`"
if [ "$UDEV_SETTLE_PROG" == "" ]; then
        # try udevsettle command
        UDEV_SETTLE_PROG="`set_prog_path udevsettle`"
else
        # udevadm is available, add 'settle' as subcommand
        UDEV_SETTLE_PROG="$UDEV_SETTLE_PROG settle"
fi
# neither command is available, use sleep 1
if [ "$UDEV_SETTLE_PROG" == "" ]; then
        UDEV_SETTLE_PROG="sleep 1"
fi
export UDEV_SETTLE_PROG

case "$HOSTOS" in
    Linux)
        export MKFS_XFS_PROG="`set_prog_path mkfs.xfs`"
        export MKFS_EXT4_PROG="`set_prog_path mkfs.ext4`"
        export MKFS_UDF_PROG="`set_prog_path mkudffs`"
        export MKFS_BTRFS_PROG="`set_btrfs_mkfs_prog_path_with_opts`"
        export MKFS_F2FS_PROG="`set_prog_path mkfs.f2fs`"
        export DUMP_F2FS_PROG="`set_prog_path dump.f2fs`"
        export BTRFS_UTIL_PROG="`set_prog_path btrfs`"
        export BTRFS_SHOW_SUPER_PROG="`set_prog_path btrfs-show-super`"
        export BTRFS_CONVERT_PROG="`set_prog_path btrfs-convert`"
        export XFS_FSR_PROG="`set_prog_path xfs_fsr`"
        export MKFS_NFS_PROG="false"
        export MKFS_CIFS_PROG="false"
        export MKFS_OVERLAY_PROG="false"
        export MKFS_REISER4_PROG="`set_prog_path mkfs.reiser4`"
        export E2FSCK_PROG="`set_prog_path e2fsck`"
        export TUNE2FS_PROG="`set_prog_path tune2fs`"
        ;;
esac

# SELinux adds extra xattrs which can mess up our expected output.
# So, mount with a context, and they won't be created.
#
# Since the context= option only accepts contexts defined in the SELinux
# policy, and different systems may have different policies with
# different context names, use the context of an existing directory.
# Assume that any valid context is fine, since xfstests should really
# only be run from an "unconfined" process, or with SELinux in permissive
# mode.  But if not, just specify your own SELINUX_MOUNT_OPTIONS.
if [ -x /usr/sbin/selinuxenabled ] && /usr/sbin/selinuxenabled; then
        : ${SELINUX_MOUNT_OPTIONS:="-o context=$(stat -c %C /)"}
        export SELINUX_MOUNT_OPTIONS
fi

# check if mkfs.xfs supports v5 xfs
XFS_MKFS_HAS_NO_META_SUPPORT=""
touch /tmp/crc_check.img
$MKFS_XFS_PROG -N -d file,name=/tmp/crc_check.img,size=32m -m crc=0 \
        >/dev/null 2>&1;
if [ $? -ne 0 ]; then
        XFS_MKFS_HAS_NO_META_SUPPORT=true
fi
rm -f /tmp/crc_check.img
export XFS_MKFS_HAS_NO_META_SUPPORT

# new doesn't need config file parsed, we can stop here
if [ "$iam" == "new" ]; then
        return 0
fi

_mount_opts()
{
        case $FSTYP in
        9p)
                export MOUNT_OPTIONS=$PLAN9_MOUNT_OPTIONS
                ;;
        xfs)
                export MOUNT_OPTIONS=$XFS_MOUNT_OPTIONS
                ;;
        udf)
                export MOUNT_OPTIONS=$UDF_MOUNT_OPTIONS
                ;;
        nfs)
                export MOUNT_OPTIONS=$NFS_MOUNT_OPTIONS
                ;;
        cifs)
                export MOUNT_OPTIONS=$CIFS_MOUNT_OPTIONS
                ;;
        ceph)
                export MOUNT_OPTIONS=$CEPHFS_MOUNT_OPTIONS
                ;;
        glusterfs)
                export MOUNT_OPTIONS=$GLUSTERFS_MOUNT_OPTIONS
                ;;
        overlay)
                export MOUNT_OPTIONS=$OVERLAY_MOUNT_OPTIONS
                ;;
        ext2|ext3|ext4|ext4dev)
                # acls & xattrs aren't turned on by default on ext$FOO
                export MOUNT_OPTIONS="-o acl,user_xattr $EXT_MOUNT_OPTIONS"
                ;;
        f2fs)
                export MOUNT_OPTIONS="-o acl,user_xattr $F2FS_MOUNT_OPTIONS"
                ;;
        reiserfs)
                # acls & xattrs aren't turned on by default on reiserfs
                export MOUNT_OPTIONS="-o acl,user_xattr $REISERFS_MOUNT_OPTIONS"
                ;;
       reiser4)
               # acls & xattrs aren't supported by reiser4
               export MOUNT_OPTIONS=$REISER4_MOUNT_OPTIONS
               ;;
        gfs2)
                # acls aren't turned on by default on gfs2
                export MOUNT_OPTIONS="-o acl $GFS2_MOUNT_OPTIONS"
                ;;
        tmpfs)
                # We need to specify the size at mount, use 1G by default
                export MOUNT_OPTIONS="-o size=1G $TMPFS_MOUNT_OPTIONS"
                ;;
        ubifs)
                export MOUNT_OPTIONS=$UBIFS_MOUNT_OPTIONS
                ;;
        *)
                ;;
        esac
}

_test_mount_opts()
{
        case $FSTYP in
        9p)
                export TEST_FS_MOUNT_OPTS=$PLAN9_MOUNT_OPTIONS
                ;;
        cifs)
                export TEST_FS_MOUNT_OPTS=$CIFS_MOUNT_OPTIONS
                ;;
        ceph)
                export TEST_FS_MOUNT_OPTS=$CEPHFS_MOUNT_OPTIONS
                ;;
        nfs)
                export TEST_FS_MOUNT_OPTS=$NFS_MOUNT_OPTIONS
                ;;
        glusterfs)
                export TEST_FS_MOUNT_OPTS=$GLUSTERFS_MOUNT_OPTIONS
                ;;
        ext2|ext3|ext4|ext4dev)
                # acls & xattrs aren't turned on by default on older ext$FOO
                export TEST_FS_MOUNT_OPTS="-o acl,user_xattr $EXT_MOUNT_OPTIONS"
                ;;
        *)
                ;;
        esac
}

_mkfs_opts()
{
        case $FSTYP in
        xfs)
                export MKFS_OPTIONS=$XFS_MKFS_OPTIONS
                ;;
        udf)
                [ ! -z "$udf_fsize" ] && \
                        UDF_MKFS_OPTIONS="$UDF_MKFS_OPTIONS -s $udf_fsize"
                export MKFS_OPTIONS=$UDF_MKFS_OPTIONS
                ;;
        nfs)
                export MKFS_OPTIONS=$NFS_MKFS_OPTIONS
                ;;
        cifs)
                export MKFS_OPTIONS=$CIFS_MKFS_OPTIONS
                ;;
        ceph)
                export MKFS_OPTIONS=$CEPHFS_MKFS_OPTIONS
                ;;
        reiserfs)
                export MKFS_OPTIONS="$REISERFS_MKFS_OPTIONS -q"
                ;;
       reiser4)
                export MKFS_OPTIONS=$REISER4_MKFS_OPTIONS
                ;;
        gfs2)
                export MKFS_OPTIONS="$GFS2_MKFS_OPTIONS -O -p lock_nolock"
                ;;
        jfs)
                export MKFS_OPTIONS="$JFS_MKFS_OPTIONS -q"
                ;;
        f2fs)
                export MKFS_OPTIONS="$F2FS_MKFS_OPTIONS"
                ;;
        *)
                ;;
        esac
}

_fsck_opts()
{
        case $FSTYP in
        ext2|ext3|ext4|ext4dev)
                export FSCK_OPTIONS="-nf"
                ;;
        reiser*)
                export FSCK_OPTIONS="--yes"
                ;;
        f2fs)
                export FSCK_OPTIONS=""
                ;;
        *)
                export FSCK_OPTIONS="-n"
                ;;
        esac
}

known_hosts()
{
        [ "$HOST_CONFIG_DIR" ] || HOST_CONFIG_DIR=`pwd`/configs

        [ -f /etc/xfsqa.config ]             && export HOST_OPTIONS=/etc/xfsqa.config
        [ -f $HOST_CONFIG_DIR/$HOST ]        && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST
        [ -f $HOST_CONFIG_DIR/$HOST.config ] && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST.config
}

# Returns a list of sections in config file
# Each section starts with the section name in the format
# [section_name1]. Only alphanumeric characters and '_' is allowed
# in the section name otherwise the section will not be resognised.
# Section name must be contained between square brackets.
get_config_sections() {
        sed -n -e "s/^\[\([[:alnum:]_]*\)\]/\1/p" < $1
}

if [ ! -f "$HOST_OPTIONS" ]; then
        known_hosts
fi

export HOST_OPTIONS_SECTIONS="-no-sections-"
export OPTIONS_HAVE_SECTIONS=false
if [ -f "$HOST_OPTIONS" ]; then
        export HOST_OPTIONS_SECTIONS=`get_config_sections $HOST_OPTIONS`
        if [ -z "$HOST_OPTIONS_SECTIONS" ]; then
                . $HOST_OPTIONS
                export HOST_OPTIONS_SECTIONS="-no-sections-"
        else
                export OPTIONS_HAVE_SECTIONS=true
        fi
fi

_check_device()
{
        local name=$1
        local dev_needed=$2
        local dev=$3

        if [ -z "$dev" ]; then
                if [ "$dev_needed" == "required" ]; then
                        _fatal "common/config: $name is required but not defined!"
                fi
                return 0
        fi

        if [ -b "$dev" ] || ( echo $dev | grep -qE ":|//" ); then
                # block device or a network url
                return 0
        fi

        case "$FSTYP" in
        9p)
                # 9p mount tags are just plain strings, so anything is allowed
                ;;
        overlay)
                if [ ! -d "$dev" ]; then
                        _fatal "common/config: $name ($dev) is not a directory for overlay"
                fi
                ;;
        ubifs)
                if [ ! -c "$dev" ]; then
                        _fatal "common/config: $name ($dev) is not a character device"
                fi
                ;;
        *)
                _fatal "common/config: $name ($dev) is not a block device or a network filesystem"
        esac
}

# check and return a canonical mount point path
_canonicalize_mountpoint()
{
        local name=$1
        local dir=$2

        if [ -d "$dir" ]; then
                # this follows symlinks and removes all trailing "/"s
                readlink -e "$dir"
                return 0
        fi

        if [ "$FSTYP" != "overlay" ] || [[ "$name" == OVL_BASE_* ]]; then
                _fatal "common/config: $name ($dir) is not a directory"
        fi

        # base fs may not be mounted yet, so just check that parent dir
        # exists (where base fs will be mounted) because we are going to
        # mkdir the overlay mount point dir anyway
        local base=`basename $dir`
        local parent=`dirname $dir`
        parent=`_canonicalize_mountpoint OVL_BASE_$name "$parent"`

        # prepend the overlay mount point to canonical parent path
        echo "$parent/$base"
}

# On check -overlay, for the non multi section config case, this
# function is called on every test, before init_rc().
# When SCRATCH/TEST_* vars are defined in config file, config file
# is sourced on every test and this function overrides the vars
# every time.
# When SCRATCH/TEST_* vars are defined in evironment and not
# in config file, this function is called after vars have already
# been overriden in the previous test.
# In that case, TEST_DEV is a directory and not a blockdev and
# the function will return without overriding the SCRATCH/TEST_* vars.
_overlay_config_override()
{
        # There are 2 options for configuring overlayfs tests:
        #
        # 1. (legacy) SCRATCH/TEST_DEV point to existing directories
        #    on an already mounted fs.  In this case, the new
        #    OVL_BASE_SCRATCH/TEST_* vars are set to use the legacy
        #    vars values (even though they may not be mount points).
        #
        [ ! -d "$TEST_DEV" ] || export OVL_BASE_TEST_DIR="$TEST_DEV"
        [ ! -d "$SCRATCH_DEV" ] || export OVL_BASE_SCRATCH_MNT="$SCRATCH_DEV"

        # 2. SCRATCH/TEST_DEV point to the base fs partitions.  In this case,
        #    the new OVL_BASE_SCRATCH/TEST_DEV/MNT vars are set to the values
        #    of the configured base fs and SCRATCH/TEST_DEV vars are set to the
        #    overlayfs base and mount dirs inside base fs mount.
        [ -b "$TEST_DEV" ] || return 0

        # Config file may specify base fs type, but we obay -overlay flag
        export OVL_BASE_FSTYP="$FSTYP"
        export FSTYP=overlay

        # Store original base fs vars
        export OVL_BASE_TEST_DEV="$TEST_DEV"
        export OVL_BASE_TEST_DIR="$TEST_DIR"
        # If config does not set MOUNT_OPTIONS, its value may be
        # leftover from previous _overlay_config_override, so
        # don't use that value for base fs mount
        [ "$MOUNT_OPTIONS" != "$OVERLAY_MOUNT_OPTIONS" ] || unset MOUNT_OPTIONS
        export OVL_BASE_MOUNT_OPTIONS="$MOUNT_OPTIONS"

        # Set TEST vars to overlay base and mount dirs inside base fs
        export TEST_DEV="$OVL_BASE_TEST_DIR"
        export TEST_DIR="$OVL_BASE_TEST_DIR/$OVL_MNT"
        export MOUNT_OPTIONS="$OVERLAY_MOUNT_OPTIONS"

        [ -b "$SCRATCH_DEV" ] || return 0

        # Store original base fs vars
        export OVL_BASE_SCRATCH_DEV="$SCRATCH_DEV"
        export OVL_BASE_SCRATCH_MNT="$SCRATCH_MNT"

        # Set SCRATCH vars to overlay base and mount dirs inside base fs
        export SCRATCH_DEV="$OVL_BASE_SCRATCH_MNT"
        export SCRATCH_MNT="$OVL_BASE_SCRATCH_MNT/$OVL_MNT"
}

_overlay_config_restore()
{
        export OVERLAY=true
        [ -z "$OVL_BASE_FSTYP" ] || export FSTYP=$OVL_BASE_FSTYP
        [ -z "$OVL_BASE_TEST_DEV" ] || export TEST_DEV=$OVL_BASE_TEST_DEV
        [ -z "$OVL_BASE_TEST_DIR" ] || export TEST_DIR=$OVL_BASE_TEST_DIR
        [ -z "$OVL_BASE_SCRATCH_DEV" ] || export SCRATCH_DEV=$OVL_BASE_SCRATCH_DEV
        [ -z "$OVL_BASE_SCRATCH_MNT" ] || export SCRATCH_MNT=$OVL_BASE_SCRATCH_MNT
        [ -z "$OVL_BASE_MOUNT_OPTIONS" ] || export MOUNT_OPTIONS=$OVL_BASE_MOUNT_OPTIONS
}

# Parse config section options. This function will parse all the configuration
# within a single section which name is passed as an argument. For section
# name format see comments in get_config_sections().
# Empty lines and everything after '#' will be ignored.
# Configuration options should be defined in the format
#
# CONFIG_OPTION=value
#
# This 'CONFIG_OPTION' variable and will be exported as an environment variable.
parse_config_section() {
        SECTION=$1
        if ! $OPTIONS_HAVE_SECTIONS; then
                return 0
        fi
        eval `sed -e 's/[[:space:]]*\=[[:space:]]*/=/g' \
                -e 's/#.*$//' \
                -e 's/[[:space:]]*$//' \
                -e 's/^[[:space:]]*//' \
                -e "s/^\([^=]*\)=\"\?'\?\([^\"']*\)\"\?'\?$/export \1=\"\2\"/" \
                < $HOST_OPTIONS \
                | sed -n -e "/^\[$SECTION\]/,/^\s*\[/{/^[^#].*\=.*/p;}"`
}

get_next_config() {
        if [ ! -z "$CONFIG_INCLUDED" ] && ! $OPTIONS_HAVE_SECTIONS; then
                return 0
        fi

        # We might have overriden FSTYP and TEST/SCRATCH vars with overlay values
        # in the previous section, so restore them to original values stored in
        # OVL_BASE_*.
        # We need to do this *before* old FSTYP and MOUNT_OPTIONS are recorded
        # and *before* SCRATCH_DEV and MOUNT_OPTIONS are unset
        if [ "$FSTYP" == "overlay" ]; then
                _overlay_config_restore
        fi

        local OLD_FSTYP=$FSTYP
        local OLD_MOUNT_OPTIONS=$MOUNT_OPTIONS
        local OLD_TEST_FS_MOUNT_OPTS=$TEST_FS_MOUNT_OPTS
        local OLD_MKFS_OPTIONS=$MKFS_OPTIONS
        local OLD_FSCK_OPTIONS=$FSCK_OPTIONS
        local OLD_USE_EXTERNAL=$USE_EXTERNAL

        unset MOUNT_OPTIONS
        unset TEST_FS_MOUNT_OPTS
        unset MKFS_OPTIONS
        unset FSCK_OPTIONS
        unset USE_EXTERNAL

        # We might have deduced SCRATCH_DEV from the SCRATCH_DEV_POOL in the previous
        # run, so we have to unset it now.
        if [ "$SCRATCH_DEV_NOT_SET" == "true" ]; then
                unset SCRATCH_DEV
        fi

        parse_config_section $1

        if [ ! -z "$OLD_FSTYP" ] && [ $OLD_FSTYP != $FSTYP ]; then
                [ -z "$MOUNT_OPTIONS" ] && _mount_opts
                [ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
                [ -z "$MKFS_OPTIONS" ] && _mkfs_opts
                [ -z "$FSCK_OPTIONS" ] && _fsck_opts

                # clear the external devices if we are not using them
                if [ -z "$USE_EXTERNAL" ]; then
                        unset TEST_RTDEV
                        unset TEST_LOGDEV
                        unset SCRATCH_RTDEV
                        unset SCRATCH_LOGDEV
                fi
        else
                [ -z "$MOUNT_OPTIONS" ] && export MOUNT_OPTIONS=$OLD_MOUNT_OPTIONS
                [ -z "$TEST_FS_MOUNT_OPTS" ] && export TEST_FS_MOUNT_OPTS=$OLD_TEST_FS_MOUNT_OPTS
                [ -z "$MKFS_OPTIONS" ] && export MKFS_OPTIONS=$OLD_MKFS_OPTIONS
                [ -z "$FSCK_OPTIONS" ] && export FSCK_OPTIONS=$OLD_FSCK_OPTIONS
                [ -z "$USE_EXTERNAL" ] && export USE_EXTERNAL=$OLD_USE_EXTERNAL
        fi

        # set default RESULT_BASE
        if [ -z "$RESULT_BASE" ]; then
                export RESULT_BASE="$here/results/"
        fi

        #  Mandatory Config values.
        MC=""
        [ -z "$EMAIL" ]          && MC="$MC EMAIL"
        [ -z "$TEST_DIR" ]       && MC="$MC TEST_DIR"
        [ -z "$TEST_DEV" ]       && MC="$MC TEST_DEV"

        if [ -n "$MC" ]; then
                echo "Warning: need to define parameters for host $HOST"
                echo "       or set variables:"
                echo "       $MC"
                exit 1
        fi

        _check_device TEST_DEV required $TEST_DEV
        export TEST_DIR=`_canonicalize_mountpoint TEST_DIR $TEST_DIR`

        # a btrfs tester will set only SCRATCH_DEV_POOL, we will put first of its dev
        # to SCRATCH_DEV and rest to SCRATCH_DEV_POOL to maintain the backward compatibility
        if [ ! -z "$SCRATCH_DEV_POOL" ]; then
                if [ ! -z "$SCRATCH_DEV" ]; then
                        echo "common/config: Error: \$SCRATCH_DEV ($SCRATCH_DEV) should be unset when \$SCRATCH_DEV_POOL ($SCRATCH_DEV_POOL) is set"
                        exit 1
                fi
                SCRATCH_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'`
                export SCRATCH_DEV
                export SCRATCH_DEV_NOT_SET=true
        fi

        _check_device SCRATCH_DEV optional $SCRATCH_DEV
        export SCRATCH_MNT=`_canonicalize_mountpoint SCRATCH_MNT $SCRATCH_MNT`

        if [ -n "$USE_EXTERNAL" ]; then
                _check_device TEST_RTDEV optional $TEST_RTDEV
                _check_device TEST_LOGDEV optional $TEST_LOGDEV
                _check_device SCRATCH_RTDEV optional $SCRATCH_RTDEV
                _check_device SCRATCH_LOGDEV optional $SCRATCH_LOGDEV
        fi

        # Override FSTYP from config when running ./check -overlay
        # and maybe override base fs TEST/SCRATCH_DEV with overlay base dirs.
        # We need to do this *after* default mount options are set by base FSTYP
        # and *after* SCRATCH_DEV is deduced from SCRATCH_DEV_POOL
        if [ "$OVERLAY" == "true" -o "$FSTYP" == "overlay" ]; then
                _overlay_config_override
        fi
}

if [ -z "$CONFIG_INCLUDED" ]; then
        get_next_config `echo $HOST_OPTIONS_SECTIONS | cut -f1 -d" "`
        export CONFIG_INCLUDED=true

        # Autodetect fs type based on what's on $TEST_DEV unless it's been set
        # externally
        if [ -z "$FSTYP" ] && \
           [ "$HOSTOS" == "Linux" -o "$OSTYPE" == "linux-gnu" ] && \
           [ ! -z "$TEST_DEV" ]; then
                FSTYP=`blkid -c /dev/null -s TYPE -o value $TEST_DEV`
        fi
        FSTYP=${FSTYP:=xfs}
        export FSTYP
        [ -z "$MOUNT_OPTIONS" ] && _mount_opts
        [ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
        [ -z "$MKFS_OPTIONS" ] && _mkfs_opts
        [ -z "$FSCK_OPTIONS" ] && _fsck_opts
else
        # We get here for the non multi section case, on every test that sources
        # common/rc after re-sourcing the HOST_OPTIONS config file.
        # Because of this re-sourcing, we need to re-canonicalize the configured
        # mount points and re-override TEST/SCRATCH_DEV overlay vars.

        # canonicalize the mount points
        # this follows symlinks and removes all trailing "/"s
        export TEST_DIR=`_canonicalize_mountpoint TEST_DIR $TEST_DIR`
        export SCRATCH_MNT=`_canonicalize_mountpoint SCRATCH_MNT $SCRATCH_MNT`

        # Override FSTYP from config when running ./check -overlay
        # and maybe override base fs TEST/SCRATCH_DEV with overlay base dirs
        if [ "$OVERLAY" == "true" -o "$FSTYP" == "overlay" ]; then
                _overlay_config_override
        fi
fi

# make sure this script returns success
/bin/true