3 # Copyright (c) 2000-2003,2006 Silicon Graphics, Inc. All Rights Reserved.
5 # This program is free software; you can redistribute it and/or
6 # modify it under the terms of the GNU General Public License as
7 # published by the Free Software Foundation.
9 # This program is distributed in the hope that it would be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 # GNU General Public License for more details.
14 # You should have received a copy of the GNU General Public License
15 # along with this program; if not, write the Free Software Foundation,
16 # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
19 # setup and check for config parameters, and in particular
21 # EMAIL - email of the script runner.
22 # TEST_DIR - scratch test directory that is in an already
23 # mounted XFS file system, needs to be be world
25 # TEST_DEV - device for file system containing TEST_DIR
28 # SCRATCH_DEV - device you can make a scratch file system on
29 # SCRATCH_MNT - mount point for scratch file system
30 # SCRATCH_LOGDEV - scratch log device for external log testing
31 # SCRATCH_RTDEV - scratch rt dev
32 # TEST_LOGDEV - test log device for external log testing
33 # TEST_RTDEV - test rt dev
34 # TAPE_DEV - the tape device for the xfsdump tests
35 # RMT_TAPE_DEV - the remote tape device for the xfsdump tests
36 # RMT_IRIXTAPE_DEV- the IRIX remote tape device for the xfsdump tests
37 # RMT_TAPE_USER - remote user for tape device
38 # SELINUX_MOUNT_OPTIONS - Options to use when SELinux is enabled.
40 # - These can be added to $HOST_CONFIG_DIR (witch default to ./config)
41 # below or a separate local configuration file can be used (using
42 # the HOST_OPTIONS variable).
43 # - This script is shared by the stress test system and the auto-qa
45 # - TEST_DEV & TEST_DIR must be assigned.
46 # - this script shouldn't make any assertions about filesystem
47 # validity or mountedness.
50 # all tests should use a common language setting to prevent golden
57 export HOST=`hostname -s`
58 export HOSTOS=`uname -s`
60 export MODULAR=0 # using XFS as a module or not
61 export BOOT="/boot" # install target for kernels
62 export EXTRA=${EXTRA:=xfs-qa}
64 # general parameters (mainly for auto-qa)
65 export SOAK_PROC=3 # -p option to fsstress
66 export SOAK_STRESS=10000 # -n option to fsstress
67 export SOAK_PASSES=-1 # count of repetitions of fsstress (while soaking)
68 export EMAIL=root@localhost # where auto-qa will send its status messages
69 export HOST_OPTIONS=${HOST_OPTIONS:=local.config}
70 export CHECK_OPTIONS=${CHECK_OPTIONS:="-g auto"}
71 export BENCH_PASSES=${BENCH_PASSES:=5}
72 export XFS_MKFS_OPTIONS=${XFS_MKFS_OPTIONS:=-bsize=4096}
73 export TIME_FACTOR=${TIME_FACTOR:=1}
74 export LOAD_FACTOR=${LOAD_FACTOR:=1}
75 export DEBUGFS_MNT=${DEBUGFS_MNT:="/sys/kernel/debug"}
77 # some constants for overlayfs setup
78 export OVL_UPPER="ovl-upper"
79 export OVL_LOWER="ovl-lower"
80 export OVL_WORK="ovl-work"
81 # overlay mount point parent must be the base fs root
82 export OVL_MNT="ovl-mnt"
85 #export DEBUG=${DEBUG:=...} # arbitrary CFLAGS really.
86 export MALLOCLIB=${MALLOCLIB:=/usr/lib/libefence.a}
87 export LOCAL_CONFIGURE_OPTIONS=${LOCAL_CONFIGURE_OPTIONS:=--enable-readline=yes}
89 export RECREATE_TEST_DEV=false
91 # $1 = prog to look for
97 # Handle mkfs.btrfs which does (or does not) require -f to overwrite
98 set_btrfs_mkfs_prog_path_with_opts()
100 p=`set_prog_path mkfs.btrfs`
101 if [ "$p" != "" ] && grep -q 'force overwrite' $p; then
115 export MKFS_PROG="`set_prog_path mkfs`"
116 [ "$MKFS_PROG" = "" ] && _fatal "mkfs not found"
118 export MOUNT_PROG="`set_prog_path mount`"
119 [ "$MOUNT_PROG" = "" ] && _fatal "mount not found"
121 export UMOUNT_PROG="`set_prog_path umount`"
122 [ "$UMOUNT_PROG" = "" ] && _fatal "umount not found"
124 export FSSTRESS_PROG="./ltp/fsstress"
125 [ ! -x $FSSTRESS_PROG ] && _fatal "fsstress not found or executable"
127 export PERL_PROG="`set_prog_path perl`"
128 [ "$PERL_PROG" = "" ] && _fatal "perl not found"
130 export AWK_PROG="`set_prog_path awk`"
131 [ "$AWK_PROG" = "" ] && _fatal "awk not found"
133 export SED_PROG="`set_prog_path sed`"
134 [ "$SED_PROG" = "" ] && _fatal "sed not found"
136 export BC_PROG="`set_prog_path bc`"
137 [ "$BC_PROG" = "" ] && _fatal "bc not found"
139 export PS_ALL_FLAGS="-ef"
141 export DF_PROG="`set_prog_path df`"
142 [ "$DF_PROG" = "" ] && _fatal "df not found"
143 [ "$HOSTOS" = "Linux" ] && export DF_PROG="$DF_PROG -T -P"
145 export XFS_IO_PROG="`set_prog_path xfs_io`"
146 [ "$XFS_IO_PROG" = "" ] && _fatal "xfs_io not found"
148 export XFS_LOGPRINT_PROG="`set_prog_path xfs_logprint`"
149 export XFS_REPAIR_PROG="`set_prog_path xfs_repair`"
150 export XFS_DB_PROG="`set_prog_path xfs_db`"
151 export XFS_GROWFS_PROG=`set_prog_path xfs_growfs`
152 export XFS_SPACEMAN_PROG="`set_prog_path xfs_spaceman`"
153 export XFS_SCRUB_PROG="`set_prog_path xfs_scrub`"
154 export XFS_PARALLEL_REPAIR_PROG="`set_prog_path xfs_prepair`"
155 export XFS_PARALLEL_REPAIR64_PROG="`set_prog_path xfs_prepair64`"
156 export __XFSDUMP_PROG="`set_prog_path xfsdump`"
157 if [ -n "$__XFSDUMP_PROG" ]; then
158 export XFSDUMP_PROG="$__XFSDUMP_PROG -e"
160 export XFSDUMP_PROG=""
162 export XFSRESTORE_PROG="`set_prog_path xfsrestore`"
163 export XFSINVUTIL_PROG="`set_prog_path xfsinvutil`"
164 export GETFATTR_PROG="`set_prog_path getfattr`"
165 export SETFATTR_PROG="`set_prog_path setfattr`"
166 export CHACL_PROG="`set_prog_path chacl`"
167 export ATTR_PROG="`set_prog_path attr`"
168 export QUOTA_PROG="`set_prog_path quota`"
169 export XFS_QUOTA_PROG="`set_prog_path xfs_quota`"
170 export KILLALL_PROG="`set_prog_path killall`"
171 export INDENT_PROG="`set_prog_path indent`"
172 export XFS_COPY_PROG="`set_prog_path xfs_copy`"
173 export FSTRIM_PROG="`set_prog_path fstrim`"
174 export DUMPE2FS_PROG="`set_prog_path dumpe2fs`"
175 export FIO_PROG="`set_prog_path fio`"
176 export FILEFRAG_PROG="`set_prog_path filefrag`"
177 export E4DEFRAG_PROG="`set_prog_path e4defrag`"
178 export LOGGER_PROG="`set_prog_path logger`"
179 export DBENCH_PROG="`set_prog_path dbench`"
180 export DMSETUP_PROG="`set_prog_path dmsetup`"
181 export WIPEFS_PROG="`set_prog_path wipefs`"
182 export DUMP_PROG="`set_prog_path dump`"
183 export RESTORE_PROG="`set_prog_path restore`"
184 export LVM_PROG="`set_prog_path lvm`"
185 export CHATTR_PROG="`set_prog_path chattr`"
186 export DEBUGFS_PROG="`set_prog_path debugfs`"
187 export UUIDGEN_PROG="`set_prog_path uuidgen`"
188 export GETRICHACL_PROG="`set_prog_path getrichacl`"
189 export SETRICHACL_PROG="`set_prog_path setrichacl`"
190 export KEYCTL_PROG="`set_prog_path keyctl`"
191 export XZ_PROG="`set_prog_path xz`"
192 export FLOCK_PROG="`set_prog_path flock`"
193 export LDD_PROG="`set_prog_path ldd`"
194 export TIMEOUT_PROG="`set_prog_path timeout`"
195 export MAN_PROG="`set_prog_path man`"
196 export NFS4_SETFACL_PROG="`set_prog_path nfs4_setfacl`"
197 export NFS4_GETFACL_PROG="`set_prog_path nfs4_getfacl`"
198 export UBIUPDATEVOL_PROG="`set_prog_path ubiupdatevol`"
200 # use 'udevadm settle' or 'udevsettle' to wait for lv to be settled.
201 # newer systems have udevadm command but older systems like RHEL5 don't.
202 # But if neither one is available, just set it to "sleep 1" to wait for lv to
204 UDEV_SETTLE_PROG="`set_prog_path udevadm`"
205 if [ "$UDEV_SETTLE_PROG" == "" ]; then
206 # try udevsettle command
207 UDEV_SETTLE_PROG="`set_prog_path udevsettle`"
209 # udevadm is available, add 'settle' as subcommand
210 UDEV_SETTLE_PROG="$UDEV_SETTLE_PROG settle"
212 # neither command is available, use sleep 1
213 if [ "$UDEV_SETTLE_PROG" == "" ]; then
214 UDEV_SETTLE_PROG="sleep 1"
216 export UDEV_SETTLE_PROG
220 export MKFS_XFS_PROG="`set_prog_path mkfs.xfs`"
221 export MKFS_EXT4_PROG="`set_prog_path mkfs.ext4`"
222 export MKFS_UDF_PROG="`set_prog_path mkudffs`"
223 export MKFS_BTRFS_PROG="`set_btrfs_mkfs_prog_path_with_opts`"
224 export MKFS_F2FS_PROG="`set_prog_path mkfs.f2fs`"
225 export DUMP_F2FS_PROG="`set_prog_path dump.f2fs`"
226 export BTRFS_UTIL_PROG="`set_prog_path btrfs`"
227 export BTRFS_SHOW_SUPER_PROG="`set_prog_path btrfs-show-super`"
228 export BTRFS_CONVERT_PROG="`set_prog_path btrfs-convert`"
229 export XFS_FSR_PROG="`set_prog_path xfs_fsr`"
230 export MKFS_NFS_PROG="false"
231 export MKFS_CIFS_PROG="false"
232 export MKFS_OVERLAY_PROG="false"
233 export MKFS_REISER4_PROG="`set_prog_path mkfs.reiser4`"
234 export E2FSCK_PROG="`set_prog_path e2fsck`"
235 export TUNE2FS_PROG="`set_prog_path tune2fs`"
239 # SELinux adds extra xattrs which can mess up our expected output.
240 # So, mount with a context, and they won't be created.
242 # Since the context= option only accepts contexts defined in the SELinux
243 # policy, and different systems may have different policies with
244 # different context names, use the context of an existing directory.
245 # Assume that any valid context is fine, since xfstests should really
246 # only be run from an "unconfined" process, or with SELinux in permissive
247 # mode. But if not, just specify your own SELINUX_MOUNT_OPTIONS.
248 if [ -x /usr/sbin/selinuxenabled ] && /usr/sbin/selinuxenabled; then
249 : ${SELINUX_MOUNT_OPTIONS:="-o context=$(stat -c %C /)"}
250 export SELINUX_MOUNT_OPTIONS
253 # check if mkfs.xfs supports v5 xfs
254 XFS_MKFS_HAS_NO_META_SUPPORT=""
255 touch /tmp/crc_check.img
256 $MKFS_XFS_PROG -N -d file,name=/tmp/crc_check.img,size=32m -m crc=0 \
258 if [ $? -ne 0 ]; then
259 XFS_MKFS_HAS_NO_META_SUPPORT=true
261 rm -f /tmp/crc_check.img
262 export XFS_MKFS_HAS_NO_META_SUPPORT
264 # new doesn't need config file parsed, we can stop here
265 if [ "$iam" == "new" ]; then
273 export MOUNT_OPTIONS=$XFS_MOUNT_OPTIONS
276 export MOUNT_OPTIONS=$UDF_MOUNT_OPTIONS
279 export MOUNT_OPTIONS=$NFS_MOUNT_OPTIONS
282 export MOUNT_OPTIONS=$CIFS_MOUNT_OPTIONS
285 export MOUNT_OPTIONS=$CEPHFS_MOUNT_OPTIONS
288 export MOUNT_OPTIONS=$GLUSTERFS_MOUNT_OPTIONS
291 export MOUNT_OPTIONS=$OVERLAY_MOUNT_OPTIONS
293 ext2|ext3|ext4|ext4dev)
294 # acls & xattrs aren't turned on by default on ext$FOO
295 export MOUNT_OPTIONS="-o acl,user_xattr $EXT_MOUNT_OPTIONS"
298 export MOUNT_OPTIONS="-o acl,user_xattr $F2FS_MOUNT_OPTIONS"
301 # acls & xattrs aren't turned on by default on reiserfs
302 export MOUNT_OPTIONS="-o acl,user_xattr $REISERFS_MOUNT_OPTIONS"
305 # acls & xattrs aren't supported by reiser4
306 export MOUNT_OPTIONS=$REISER4_MOUNT_OPTIONS
309 # acls aren't turned on by default on gfs2
310 export MOUNT_OPTIONS="-o acl $GFS2_MOUNT_OPTIONS"
313 # We need to specify the size at mount, use 1G by default
314 export MOUNT_OPTIONS="-o size=1G $TMPFS_MOUNT_OPTIONS"
317 export MOUNT_OPTIONS=$UBIFS_MOUNT_OPTIONS
328 export TEST_FS_MOUNT_OPTS=$CIFS_MOUNT_OPTIONS
331 export TEST_FS_MOUNT_OPTS=$CEPHFS_MOUNT_OPTIONS
334 export TEST_FS_MOUNT_OPTS=$NFS_MOUNT_OPTIONS
337 export TEST_FS_MOUNT_OPTS=$GLUSTERFS_MOUNT_OPTIONS
339 ext2|ext3|ext4|ext4dev)
340 # acls & xattrs aren't turned on by default on older ext$FOO
341 export TEST_FS_MOUNT_OPTS="-o acl,user_xattr $EXT_MOUNT_OPTIONS"
352 export MKFS_OPTIONS=$XFS_MKFS_OPTIONS
355 [ ! -z "$udf_fsize" ] && \
356 UDF_MKFS_OPTIONS="$UDF_MKFS_OPTIONS -s $udf_fsize"
357 export MKFS_OPTIONS=$UDF_MKFS_OPTIONS
360 export MKFS_OPTIONS=$NFS_MKFS_OPTIONS
363 export MKFS_OPTIONS=$CIFS_MKFS_OPTIONS
366 export MKFS_OPTIONS=$CEPHFS_MKFS_OPTIONS
369 export MKFS_OPTIONS="$REISERFS_MKFS_OPTIONS -q"
372 export MKFS_OPTIONS=$REISER4_MKFS_OPTIONS
375 export MKFS_OPTIONS="$GFS2_MKFS_OPTIONS -O -p lock_nolock"
378 export MKFS_OPTIONS="$JFS_MKFS_OPTIONS -q"
381 export MKFS_OPTIONS="$F2FS_MKFS_OPTIONS"
391 ext2|ext3|ext4|ext4dev)
392 export FSCK_OPTIONS="-nf"
395 export FSCK_OPTIONS="--yes"
398 export FSCK_OPTIONS=""
401 export FSCK_OPTIONS="-n"
408 [ "$HOST_CONFIG_DIR" ] || HOST_CONFIG_DIR=`pwd`/configs
410 [ -f /etc/xfsqa.config ] && export HOST_OPTIONS=/etc/xfsqa.config
411 [ -f $HOST_CONFIG_DIR/$HOST ] && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST
412 [ -f $HOST_CONFIG_DIR/$HOST.config ] && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST.config
415 # Returns a list of sections in config file
416 # Each section starts with the section name in the format
417 # [section_name1]. Only alphanumeric characters and '_' is allowed
418 # in the section name otherwise the section will not be resognised.
419 # Section name must be contained between square brackets.
420 get_config_sections() {
421 sed -n -e "s/^\[\([[:alnum:]_]*\)\]/\1/p" < $1
424 if [ ! -f "$HOST_OPTIONS" ]; then
428 export HOST_OPTIONS_SECTIONS="-no-sections-"
429 export OPTIONS_HAVE_SECTIONS=false
430 if [ -f "$HOST_OPTIONS" ]; then
431 export HOST_OPTIONS_SECTIONS=`get_config_sections $HOST_OPTIONS`
432 if [ -z "$HOST_OPTIONS_SECTIONS" ]; then
434 export HOST_OPTIONS_SECTIONS="-no-sections-"
436 export OPTIONS_HAVE_SECTIONS=true
446 if [ -z "$dev" ]; then
447 if [ "$dev_needed" == "required" ]; then
448 _fatal "common/config: $name is required but not defined!"
453 if [ -b "$dev" ] || ( echo $dev | grep -qE ":|//" ); then
454 # block device or a network url
460 if [ ! -d "$dev" ]; then
461 _fatal "common/config: $name ($dev) is not a directory for overlay"
465 if [ ! -c "$dev" ]; then
466 _fatal "common/config: $name ($dev) is not a character device"
470 _fatal "common/config: $name ($dev) is not a block device or a network filesystem"
474 # check and return a canonical mount point path
475 _canonicalize_mountpoint()
480 if [ -d "$dir" ]; then
481 # this follows symlinks and removes all trailing "/"s
486 if [ "$FSTYP" != "overlay" ] || [[ "$name" == OVL_BASE_* ]]; then
487 _fatal "common/config: $name ($dir) is not a directory"
490 # base fs may not be mounted yet, so just check that parent dir
491 # exists (where base fs will be mounted) because we are going to
492 # mkdir the overlay mount point dir anyway
493 local base=`basename $dir`
494 local parent=`dirname $dir`
495 parent=`_canonicalize_mountpoint OVL_BASE_$name "$parent"`
497 # prepend the overlay mount point to canonical parent path
501 # On check -overlay, for the non multi section config case, this
502 # function is called on every test, before init_rc().
503 # When SCRATCH/TEST_* vars are defined in config file, config file
504 # is sourced on every test and this function overrides the vars
506 # When SCRATCH/TEST_* vars are defined in evironment and not
507 # in config file, this function is called after vars have already
508 # been overriden in the previous test.
509 # In that case, TEST_DEV is a directory and not a blockdev and
510 # the function will return without overriding the SCRATCH/TEST_* vars.
511 _overlay_config_override()
513 # There are 2 options for configuring overlayfs tests:
515 # 1. (legacy) SCRATCH/TEST_DEV point to existing directories
516 # on an already mounted fs. In this case, the new
517 # OVL_BASE_SCRATCH/TEST_* vars are set to use the legacy
518 # vars values (even though they may not be mount points).
520 [ ! -d "$TEST_DEV" ] || export OVL_BASE_TEST_DIR="$TEST_DEV"
521 [ ! -d "$SCRATCH_DEV" ] || export OVL_BASE_SCRATCH_MNT="$SCRATCH_DEV"
523 # 2. SCRATCH/TEST_DEV point to the base fs partitions. In this case,
524 # the new OVL_BASE_SCRATCH/TEST_DEV/MNT vars are set to the values
525 # of the configured base fs and SCRATCH/TEST_DEV vars are set to the
526 # overlayfs base and mount dirs inside base fs mount.
527 [ -b "$TEST_DEV" ] || return 0
529 # Config file may specify base fs type, but we obay -overlay flag
530 export OVL_BASE_FSTYP="$FSTYP"
533 # Store original base fs vars
534 export OVL_BASE_TEST_DEV="$TEST_DEV"
535 export OVL_BASE_TEST_DIR="$TEST_DIR"
536 # If config does not set MOUNT_OPTIONS, its value may be
537 # leftover from previous _overlay_config_override, so
538 # don't use that value for base fs mount
539 [ "$MOUNT_OPTIONS" != "$OVERLAY_MOUNT_OPTIONS" ] || unset MOUNT_OPTIONS
540 export OVL_BASE_MOUNT_OPTIONS="$MOUNT_OPTIONS"
542 # Set TEST vars to overlay base and mount dirs inside base fs
543 export TEST_DEV="$OVL_BASE_TEST_DIR"
544 export TEST_DIR="$OVL_BASE_TEST_DIR/$OVL_MNT"
545 export MOUNT_OPTIONS="$OVERLAY_MOUNT_OPTIONS"
547 [ -b "$SCRATCH_DEV" ] || return 0
549 # Store original base fs vars
550 export OVL_BASE_SCRATCH_DEV="$SCRATCH_DEV"
551 export OVL_BASE_SCRATCH_MNT="$SCRATCH_MNT"
553 # Set SCRATCH vars to overlay base and mount dirs inside base fs
554 export SCRATCH_DEV="$OVL_BASE_SCRATCH_MNT"
555 export SCRATCH_MNT="$OVL_BASE_SCRATCH_MNT/$OVL_MNT"
558 _overlay_config_restore()
561 [ -z "$OVL_BASE_FSTYP" ] || export FSTYP=$OVL_BASE_FSTYP
562 [ -z "$OVL_BASE_TEST_DEV" ] || export TEST_DEV=$OVL_BASE_TEST_DEV
563 [ -z "$OVL_BASE_TEST_DIR" ] || export TEST_DIR=$OVL_BASE_TEST_DIR
564 [ -z "$OVL_BASE_SCRATCH_DEV" ] || export SCRATCH_DEV=$OVL_BASE_SCRATCH_DEV
565 [ -z "$OVL_BASE_SCRATCH_MNT" ] || export SCRATCH_MNT=$OVL_BASE_SCRATCH_MNT
566 [ -z "$OVL_BASE_MOUNT_OPTIONS" ] || export MOUNT_OPTIONS=$OVL_BASE_MOUNT_OPTIONS
569 # Parse config section options. This function will parse all the configuration
570 # within a single section which name is passed as an argument. For section
571 # name format see comments in get_config_sections().
572 # Empty lines and everything after '#' will be ignored.
573 # Configuration options should be defined in the format
575 # CONFIG_OPTION=value
577 # This 'CONFIG_OPTION' variable and will be exported as an environment variable.
578 parse_config_section() {
580 if ! $OPTIONS_HAVE_SECTIONS; then
583 eval `sed -e 's/[[:space:]]*\=[[:space:]]*/=/g' \
585 -e 's/[[:space:]]*$//' \
586 -e 's/^[[:space:]]*//' \
587 -e "s/^\([^=]*\)=\"\?'\?\([^\"']*\)\"\?'\?$/export \1=\"\2\"/" \
589 | sed -n -e "/^\[$SECTION\]/,/^\s*\[/{/^[^#].*\=.*/p;}"`
593 if [ ! -z "$CONFIG_INCLUDED" ] && ! $OPTIONS_HAVE_SECTIONS; then
597 # We might have overriden FSTYP and TEST/SCRATCH vars with overlay values
598 # in the previous section, so restore them to original values stored in
600 # We need to do this *before* old FSTYP and MOUNT_OPTIONS are recorded
601 # and *before* SCRATCH_DEV and MOUNT_OPTIONS are unset
602 if [ "$FSTYP" == "overlay" ]; then
603 _overlay_config_restore
606 local OLD_FSTYP=$FSTYP
607 local OLD_MOUNT_OPTIONS=$MOUNT_OPTIONS
608 local OLD_TEST_FS_MOUNT_OPTS=$TEST_FS_MOUNT_OPTS
609 local OLD_MKFS_OPTIONS=$MKFS_OPTIONS
610 local OLD_FSCK_OPTIONS=$FSCK_OPTIONS
611 local OLD_USE_EXTERNAL=$USE_EXTERNAL
614 unset TEST_FS_MOUNT_OPTS
619 # We might have deduced SCRATCH_DEV from the SCRATCH_DEV_POOL in the previous
620 # run, so we have to unset it now.
621 if [ "$SCRATCH_DEV_NOT_SET" == "true" ]; then
625 parse_config_section $1
627 if [ ! -z "$OLD_FSTYP" ] && [ $OLD_FSTYP != $FSTYP ]; then
628 [ -z "$MOUNT_OPTIONS" ] && _mount_opts
629 [ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
630 [ -z "$MKFS_OPTIONS" ] && _mkfs_opts
631 [ -z "$FSCK_OPTIONS" ] && _fsck_opts
633 # clear the external devices if we are not using them
634 if [ -z "$USE_EXTERNAL" ]; then
641 [ -z "$MOUNT_OPTIONS" ] && export MOUNT_OPTIONS=$OLD_MOUNT_OPTIONS
642 [ -z "$TEST_FS_MOUNT_OPTS" ] && export TEST_FS_MOUNT_OPTS=$OLD_TEST_FS_MOUNT_OPTS
643 [ -z "$MKFS_OPTIONS" ] && export MKFS_OPTIONS=$OLD_MKFS_OPTIONS
644 [ -z "$FSCK_OPTIONS" ] && export FSCK_OPTIONS=$OLD_FSCK_OPTIONS
645 [ -z "$USE_EXTERNAL" ] && export USE_EXTERNAL=$OLD_USE_EXTERNAL
648 # set default RESULT_BASE
649 if [ -z "$RESULT_BASE" ]; then
650 export RESULT_BASE="$here/results/"
653 # Mandatory Config values.
655 [ -z "$EMAIL" ] && MC="$MC EMAIL"
656 [ -z "$TEST_DIR" ] && MC="$MC TEST_DIR"
657 [ -z "$TEST_DEV" ] && MC="$MC TEST_DEV"
659 if [ -n "$MC" ]; then
660 echo "Warning: need to define parameters for host $HOST"
661 echo " or set variables:"
666 _check_device TEST_DEV required $TEST_DEV
667 export TEST_DIR=`_canonicalize_mountpoint TEST_DIR $TEST_DIR`
669 # a btrfs tester will set only SCRATCH_DEV_POOL, we will put first of its dev
670 # to SCRATCH_DEV and rest to SCRATCH_DEV_POOL to maintain the backward compatibility
671 if [ ! -z "$SCRATCH_DEV_POOL" ]; then
672 if [ ! -z "$SCRATCH_DEV" ]; then
673 echo "common/config: Error: \$SCRATCH_DEV ($SCRATCH_DEV) should be unset when \$SCRATCH_DEV_POOL ($SCRATCH_DEV_POOL) is set"
676 SCRATCH_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'`
678 export SCRATCH_DEV_NOT_SET=true
681 _check_device SCRATCH_DEV optional $SCRATCH_DEV
682 export SCRATCH_MNT=`_canonicalize_mountpoint SCRATCH_MNT $SCRATCH_MNT`
684 if [ -n "$USE_EXTERNAL" ]; then
685 _check_device TEST_RTDEV optional $TEST_RTDEV
686 _check_device TEST_LOGDEV optional $TEST_LOGDEV
687 _check_device SCRATCH_RTDEV optional $SCRATCH_RTDEV
688 _check_device SCRATCH_LOGDEV optional $SCRATCH_LOGDEV
691 # Override FSTYP from config when running ./check -overlay
692 # and maybe override base fs TEST/SCRATCH_DEV with overlay base dirs.
693 # We need to do this *after* default mount options are set by base FSTYP
694 # and *after* SCRATCH_DEV is deduced from SCRATCH_DEV_POOL
695 if [ "$OVERLAY" == "true" -o "$FSTYP" == "overlay" ]; then
696 _overlay_config_override
700 if [ -z "$CONFIG_INCLUDED" ]; then
701 get_next_config `echo $HOST_OPTIONS_SECTIONS | cut -f1 -d" "`
702 export CONFIG_INCLUDED=true
704 # Autodetect fs type based on what's on $TEST_DEV unless it's been set
706 if [ -z "$FSTYP" ] && \
707 [ "$HOSTOS" == "Linux" -o "$OSTYPE" == "linux-gnu" ] && \
708 [ ! -z "$TEST_DEV" ]; then
709 FSTYP=`blkid -c /dev/null -s TYPE -o value $TEST_DEV`
713 [ -z "$MOUNT_OPTIONS" ] && _mount_opts
714 [ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
715 [ -z "$MKFS_OPTIONS" ] && _mkfs_opts
716 [ -z "$FSCK_OPTIONS" ] && _fsck_opts
718 # We get here for the non multi section case, on every test that sources
719 # common/rc after re-sourcing the HOST_OPTIONS config file.
720 # Because of this re-sourcing, we need to re-canonicalize the configured
721 # mount points and re-override TEST/SCRATCH_DEV overlay vars.
723 # canonicalize the mount points
724 # this follows symlinks and removes all trailing "/"s
725 export TEST_DIR=`_canonicalize_mountpoint TEST_DIR $TEST_DIR`
726 export SCRATCH_MNT=`_canonicalize_mountpoint SCRATCH_MNT $SCRATCH_MNT`
728 # Override FSTYP from config when running ./check -overlay
729 # and maybe override base fs TEST/SCRATCH_DEV with overlay base dirs
730 if [ "$OVERLAY" == "true" -o "$FSTYP" == "overlay" ]; then
731 _overlay_config_override
735 # make sure this script returns success