2 # SPDX-License-Identifier: GPL-2.0
3 # Copyright (c) 2000-2003,2006 Silicon Graphics, Inc. All Rights Reserved.
5 # setup and check for config parameters, and in particular
7 # EMAIL - email of the script runner.
8 # TEST_DIR - scratch test directory that is in an already
9 # mounted XFS file system, needs to be be world
11 # TEST_DEV - device for file system containing TEST_DIR
14 # SCRATCH_DEV - device you can make a scratch file system on
15 # SCRATCH_MNT - mount point for scratch file system
16 # SCRATCH_LOGDEV - scratch log device for external log testing
17 # SCRATCH_RTDEV - scratch rt dev
18 # TEST_LOGDEV - test log device for external log testing
19 # TEST_RTDEV - test rt dev
20 # TAPE_DEV - the tape device for the xfsdump tests
21 # RMT_TAPE_DEV - the remote tape device for the xfsdump tests
22 # RMT_IRIXTAPE_DEV- the IRIX remote tape device for the xfsdump tests
23 # RMT_TAPE_USER - remote user for tape device
24 # SELINUX_MOUNT_OPTIONS - Options to use when SELinux is enabled.
26 # - These can be added to $HOST_CONFIG_DIR (witch default to ./config)
27 # below or a separate local configuration file can be used (using
28 # the HOST_OPTIONS variable).
29 # - This script is shared by the stress test system and the auto-qa
31 # - TEST_DEV & TEST_DIR must be assigned.
32 # - this script shouldn't make any assertions about filesystem
33 # validity or mountedness.
38 # all tests should use a common language setting to prevent golden
45 export HOST=`hostname -s`
46 export HOSTOS=`uname -s`
48 export MODULAR=0 # using XFS as a module or not
49 export BOOT="/boot" # install target for kernels
50 export EXTRA=${EXTRA:=xfs-qa}
52 # general parameters (mainly for auto-qa)
53 export SOAK_PROC=3 # -p option to fsstress
54 export SOAK_STRESS=10000 # -n option to fsstress
55 export SOAK_PASSES=-1 # count of repetitions of fsstress (while soaking)
56 export EMAIL=root@localhost # where auto-qa will send its status messages
57 export HOST_OPTIONS=${HOST_OPTIONS:=local.config}
58 export CHECK_OPTIONS=${CHECK_OPTIONS:="-g auto"}
59 export BENCH_PASSES=${BENCH_PASSES:=5}
60 export XFS_MKFS_OPTIONS=${XFS_MKFS_OPTIONS:=-bsize=4096}
61 export TIME_FACTOR=${TIME_FACTOR:=1}
62 export LOAD_FACTOR=${LOAD_FACTOR:=1}
63 export DEBUGFS_MNT=${DEBUGFS_MNT:="/sys/kernel/debug"}
65 # some constants for overlayfs setup
66 export OVL_UPPER="ovl-upper"
67 export OVL_LOWER="ovl-lower"
68 export OVL_WORK="ovl-work"
69 # overlay mount point parent must be the base fs root
70 export OVL_MNT="ovl-mnt"
72 # From e2fsprogs/e2fsck/e2fsck.h:
73 # Exit code used by fsck-type programs
75 export FSCK_NONDESTRUCT=1
77 export FSCK_UNCORRECTED=4
80 export FSCK_CANCELED=32
81 export FSCK_LIBRARY=128
84 #export DEBUG=${DEBUG:=...} # arbitrary CFLAGS really.
85 export MALLOCLIB=${MALLOCLIB:=/usr/lib/libefence.a}
86 export LOCAL_CONFIGURE_OPTIONS=${LOCAL_CONFIGURE_OPTIONS:=--enable-readline=yes}
88 export RECREATE_TEST_DEV=false
90 # Handle mkfs.$fstyp which does (or does not) require -f to overwrite
91 set_mkfs_prog_path_with_opts()
94 local p=$(type -P mkfs.$fstyp)
96 # Note: mkfs.f2fs doesn't support the --help option yet, but it doesn't
97 # matter since it also prints the help when an invalid option is given.
98 if [ "$p" != "" ] && \
99 $p --help |& grep -q "[[:space:]]-f[[:space:]|]"; then
113 export MKFS_PROG="$(type -P mkfs)"
114 [ "$MKFS_PROG" = "" ] && _fatal "mkfs not found"
116 export MOUNT_PROG="$(type -P mount)"
117 [ "$MOUNT_PROG" = "" ] && _fatal "mount not found"
119 export UMOUNT_PROG="$(type -P umount)"
120 [ "$UMOUNT_PROG" = "" ] && _fatal "umount not found"
122 export FSSTRESS_PROG="./ltp/fsstress"
123 [ ! -x $FSSTRESS_PROG ] && _fatal "fsstress not found or executable"
125 export PERL_PROG="$(type -P perl)"
126 [ "$PERL_PROG" = "" ] && _fatal "perl not found"
128 export AWK_PROG="$(type -P awk)"
129 [ "$AWK_PROG" = "" ] && _fatal "awk not found"
131 export SED_PROG="$(type -P sed)"
132 [ "$SED_PROG" = "" ] && _fatal "sed not found"
134 export BC_PROG="$(type -P bc)"
135 [ "$BC_PROG" = "" ] && _fatal "bc not found"
137 export PS_ALL_FLAGS="-ef"
139 export DF_PROG="$(type -P df)"
140 [ "$DF_PROG" = "" ] && _fatal "df not found"
141 [ "$HOSTOS" = "Linux" ] && export DF_PROG="$DF_PROG -T -P"
143 export XFS_IO_PROG="$(type -P xfs_io)"
144 [ "$XFS_IO_PROG" = "" ] && _fatal "xfs_io not found"
146 export MKSWAP_PROG="$(type -P mkswap)"
147 # mkswap from util-linux v2.17.2 or older needs "-f" option to force to erase
149 MKSWAP_PROG="$MKSWAP_PROG -f"
151 export XFS_LOGPRINT_PROG="$(type -P xfs_logprint)"
152 export XFS_REPAIR_PROG="$(type -P xfs_repair)"
153 export XFS_DB_PROG="$(type -P xfs_db)"
154 export XFS_GROWFS_PROG=$(type -P xfs_growfs)
155 export XFS_SPACEMAN_PROG="$(type -P xfs_spaceman)"
156 export XFS_SCRUB_PROG="$(type -P xfs_scrub)"
157 export XFS_PARALLEL_REPAIR_PROG="$(type -P xfs_prepair)"
158 export XFS_PARALLEL_REPAIR64_PROG="$(type -P xfs_prepair64)"
159 export __XFSDUMP_PROG="$(type -P xfsdump)"
160 if [ -n "$__XFSDUMP_PROG" ]; then
161 export XFSDUMP_PROG="$__XFSDUMP_PROG -e"
163 export XFSDUMP_PROG=""
165 export XFSRESTORE_PROG="$(type -P xfsrestore)"
166 export XFSINVUTIL_PROG="$(type -P xfsinvutil)"
167 export GETFATTR_PROG="$(type -P getfattr)"
168 export SETFATTR_PROG="$(type -P setfattr)"
169 export CHACL_PROG="$(type -P chacl)"
170 export ATTR_PROG="$(type -P attr)"
171 export QUOTA_PROG="$(type -P quota)"
172 export XFS_QUOTA_PROG="$(type -P xfs_quota)"
173 export KILLALL_PROG="$(type -P killall)"
174 export INDENT_PROG="$(type -P indent)"
175 export XFS_COPY_PROG="$(type -P xfs_copy)"
176 export FSTRIM_PROG="$(type -P fstrim)"
177 export DUMPE2FS_PROG="$(type -P dumpe2fs)"
178 export RESIZE2FS_PROG="$(type -P resize2fs)"
179 export FIO_PROG="$(type -P fio)"
180 export FILEFRAG_PROG="$(type -P filefrag)"
181 export E4DEFRAG_PROG="$(type -P e4defrag)"
182 export LOGGER_PROG="$(type -P logger)"
183 export DBENCH_PROG="$(type -P dbench)"
184 export DMSETUP_PROG="$(type -P dmsetup)"
185 export WIPEFS_PROG="$(type -P wipefs)"
186 export DUMP_PROG="$(type -P dump)"
187 export RESTORE_PROG="$(type -P restore)"
188 export LVM_PROG="$(type -P lvm)"
189 export LSATTR_PROG="$(type -P lsattr)"
190 export CHATTR_PROG="$(type -P chattr)"
191 export DEBUGFS_PROG="$(type -P debugfs)"
192 export UUIDGEN_PROG="$(type -P uuidgen)"
193 export GETRICHACL_PROG="$(type -P getrichacl)"
194 export SETRICHACL_PROG="$(type -P setrichacl)"
195 export KEYCTL_PROG="$(type -P keyctl)"
196 export XZ_PROG="$(type -P xz)"
197 export FLOCK_PROG="$(type -P flock)"
198 export LDD_PROG="$(type -P ldd)"
199 export TIMEOUT_PROG="$(type -P timeout)"
200 export MAN_PROG="$(type -P man)"
201 export NFS4_SETFACL_PROG="$(type -P nfs4_setfacl)"
202 export NFS4_GETFACL_PROG="$(type -P nfs4_getfacl)"
203 export UBIUPDATEVOL_PROG="$(type -P ubiupdatevol)"
204 export THIN_CHECK_PROG="$(type -P thin_check)"
205 export PYTHON2_PROG="$(type -P python2)"
206 export SQLITE3_PROG="$(type -P sqlite3)"
207 export TIMEOUT_PROG="$(type -P timeout)"
208 export SETCAP_PROG="$(type -P setcap)"
209 export GETCAP_PROG="$(type -P getcap)"
210 export CAPSH_PROG="$(type -P capsh)"
211 export CHECKBASHISMS_PROG="$(type -P checkbashisms)"
212 export XFS_INFO_PROG="$(type -P xfs_info)"
213 export DUPEREMOVE_PROG="$(type -P duperemove)"
214 export CC_PROG="$(type -P cc)"
216 # use 'udevadm settle' or 'udevsettle' to wait for lv to be settled.
217 # newer systems have udevadm command but older systems like RHEL5 don't.
218 # But if neither one is available, just set it to "sleep 1" to wait for lv to
220 UDEV_SETTLE_PROG="$(type -P udevadm)"
221 if [ "$UDEV_SETTLE_PROG" == "" ]; then
222 # try udevsettle command
223 UDEV_SETTLE_PROG="$(type -P udevsettle)"
225 # udevadm is available, add 'settle' as subcommand
226 UDEV_SETTLE_PROG="$UDEV_SETTLE_PROG settle"
228 # neither command is available, use sleep 1
229 if [ "$UDEV_SETTLE_PROG" == "" ]; then
230 UDEV_SETTLE_PROG="sleep 1"
232 export UDEV_SETTLE_PROG
236 export MKFS_XFS_PROG=$(type -P mkfs.xfs)
237 export MKFS_EXT4_PROG=$(type -P mkfs.ext4)
238 export MKFS_UDF_PROG=$(type -P mkudffs)
239 export MKFS_BTRFS_PROG=$(set_mkfs_prog_path_with_opts btrfs)
240 export MKFS_F2FS_PROG=$(set_mkfs_prog_path_with_opts f2fs)
241 export DUMP_F2FS_PROG=$(type -P dump.f2fs)
242 export BTRFS_UTIL_PROG=$(type -P btrfs)
243 export BTRFS_SHOW_SUPER_PROG=$(type -P btrfs-show-super)
244 export BTRFS_CONVERT_PROG=$(type -P btrfs-convert)
245 export BTRFS_TUNE_PROG=$(type -P btrfstune)
246 export XFS_FSR_PROG=$(type -P xfs_fsr)
247 export MKFS_NFS_PROG="false"
248 export MKFS_CIFS_PROG="false"
249 export MKFS_OVERLAY_PROG="false"
250 export MKFS_REISER4_PROG=$(type -P mkfs.reiser4)
251 export E2FSCK_PROG=$(type -P e2fsck)
252 export TUNE2FS_PROG=$(type -P tune2fs)
253 export FSCK_OVERLAY_PROG=$(type -P fsck.overlay)
257 # SELinux adds extra xattrs which can mess up our expected output.
258 # So, mount with a context, and they won't be created.
260 # Since the context= option only accepts contexts defined in the SELinux
261 # policy, and different systems may have different policies with
262 # different context names, use the context of an existing directory.
263 # Assume that any valid context is fine, since xfstests should really
264 # only be run from an "unconfined" process, or with SELinux in permissive
265 # mode. But if not, just specify your own SELINUX_MOUNT_OPTIONS.
266 if [ -x /usr/sbin/selinuxenabled ] && /usr/sbin/selinuxenabled; then
267 : ${SELINUX_MOUNT_OPTIONS:="-o context=$(stat -c %C /)"}
268 export SELINUX_MOUNT_OPTIONS
271 # check if mkfs.xfs supports v5 xfs
272 if [ "$FSTYP" == "xfs" ]; then
273 XFS_MKFS_HAS_NO_META_SUPPORT=""
274 touch /tmp/crc_check.img
275 $MKFS_XFS_PROG -N -d file,name=/tmp/crc_check.img,size=32m -m crc=0 \
277 if [ $? -ne 0 ]; then
278 XFS_MKFS_HAS_NO_META_SUPPORT=true
280 rm -f /tmp/crc_check.img
281 export XFS_MKFS_HAS_NO_META_SUPPORT
288 export MOUNT_OPTIONS=$PLAN9_MOUNT_OPTIONS
291 export MOUNT_OPTIONS=$XFS_MOUNT_OPTIONS
294 export MOUNT_OPTIONS=$UDF_MOUNT_OPTIONS
297 export MOUNT_OPTIONS=$NFS_MOUNT_OPTIONS
300 export MOUNT_OPTIONS=$CIFS_MOUNT_OPTIONS
303 export MOUNT_OPTIONS=$CEPHFS_MOUNT_OPTIONS
306 export MOUNT_OPTIONS=$GLUSTERFS_MOUNT_OPTIONS
309 export MOUNT_OPTIONS=$OVERLAY_MOUNT_OPTIONS
311 ext2|ext3|ext4|ext4dev)
312 # acls & xattrs aren't turned on by default on ext$FOO
313 export MOUNT_OPTIONS="-o acl,user_xattr $EXT_MOUNT_OPTIONS"
316 export MOUNT_OPTIONS="-o acl,user_xattr $F2FS_MOUNT_OPTIONS"
319 # acls & xattrs aren't turned on by default on reiserfs
320 export MOUNT_OPTIONS="-o acl,user_xattr $REISERFS_MOUNT_OPTIONS"
323 # acls & xattrs aren't supported by reiser4
324 export MOUNT_OPTIONS=$REISER4_MOUNT_OPTIONS
327 # acls aren't turned on by default on gfs2
328 export MOUNT_OPTIONS="-o acl $GFS2_MOUNT_OPTIONS"
331 # We need to specify the size at mount, use 1G by default
332 export MOUNT_OPTIONS="-o size=1G $TMPFS_MOUNT_OPTIONS"
335 export MOUNT_OPTIONS=$UBIFS_MOUNT_OPTIONS
346 export TEST_FS_MOUNT_OPTS=$PLAN9_MOUNT_OPTIONS
349 export TEST_FS_MOUNT_OPTS=$CIFS_MOUNT_OPTIONS
352 export TEST_FS_MOUNT_OPTS=$CEPHFS_MOUNT_OPTIONS
355 export TEST_FS_MOUNT_OPTS=$NFS_MOUNT_OPTIONS
358 export TEST_FS_MOUNT_OPTS=$GLUSTERFS_MOUNT_OPTIONS
360 ext2|ext3|ext4|ext4dev)
361 # acls & xattrs aren't turned on by default on older ext$FOO
362 export TEST_FS_MOUNT_OPTS="-o acl,user_xattr $EXT_MOUNT_OPTIONS"
373 export MKFS_OPTIONS=$XFS_MKFS_OPTIONS
376 [ ! -z "$udf_fsize" ] && \
377 UDF_MKFS_OPTIONS="$UDF_MKFS_OPTIONS -s $udf_fsize"
378 export MKFS_OPTIONS=$UDF_MKFS_OPTIONS
381 export MKFS_OPTIONS=$NFS_MKFS_OPTIONS
384 export MKFS_OPTIONS=$CIFS_MKFS_OPTIONS
387 export MKFS_OPTIONS=$CEPHFS_MKFS_OPTIONS
390 export MKFS_OPTIONS="$REISERFS_MKFS_OPTIONS -q"
393 export MKFS_OPTIONS=$REISER4_MKFS_OPTIONS
396 export MKFS_OPTIONS="$GFS2_MKFS_OPTIONS -O -p lock_nolock"
399 export MKFS_OPTIONS="$JFS_MKFS_OPTIONS -q"
402 export MKFS_OPTIONS="$F2FS_MKFS_OPTIONS"
412 ext2|ext3|ext4|ext4dev)
413 export FSCK_OPTIONS="-nf"
416 export FSCK_OPTIONS="--yes"
419 export FSCK_OPTIONS=""
422 export FSCK_OPTIONS="-n"
429 [ "$HOST_CONFIG_DIR" ] || HOST_CONFIG_DIR=`pwd`/configs
431 [ -f /etc/xfsqa.config ] && export HOST_OPTIONS=/etc/xfsqa.config
432 [ -f $HOST_CONFIG_DIR/$HOST ] && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST
433 [ -f $HOST_CONFIG_DIR/$HOST.config ] && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST.config
436 # Returns a list of sections in config file
437 # Each section starts with the section name in the format
438 # [section_name1]. Only alphanumeric characters and '_' is allowed
439 # in the section name otherwise the section will not be resognised.
440 # Section name must be contained between square brackets.
441 get_config_sections() {
442 sed -n -e "s/^\[\([[:alnum:]_]*\)\]/\1/p" < $1
445 if [ ! -f "$HOST_OPTIONS" ]; then
449 export HOST_OPTIONS_SECTIONS="-no-sections-"
450 export OPTIONS_HAVE_SECTIONS=false
451 if [ -f "$HOST_OPTIONS" ]; then
452 export HOST_OPTIONS_SECTIONS=`get_config_sections $HOST_OPTIONS`
453 if [ -z "$HOST_OPTIONS_SECTIONS" ]; then
455 export HOST_OPTIONS_SECTIONS="-no-sections-"
457 export OPTIONS_HAVE_SECTIONS=true
467 if [ -z "$dev" ]; then
468 if [ "$dev_needed" == "required" ]; then
469 _fatal "common/config: $name is required but not defined!"
474 if [ -b "$dev" ] || ( echo $dev | grep -qE ":|//" ); then
475 # block device or a network url
481 # 9p mount tags are just plain strings, so anything is allowed
482 # tmpfs doesn't use mount source, ignore
485 if [ ! -d "$dev" ]; then
486 _fatal "common/config: $name ($dev) is not a directory for overlay"
490 if [ ! -c "$dev" ]; then
491 _fatal "common/config: $name ($dev) is not a character device"
495 _fatal "common/config: $name ($dev) is not a block device or a network filesystem"
499 # check and return a canonical mount point path
500 _canonicalize_mountpoint()
505 if [ -d "$dir" ]; then
506 # this follows symlinks and removes all trailing "/"s
511 if [ "$FSTYP" != "overlay" ] || [[ "$name" == OVL_BASE_* ]]; then
512 _fatal "common/config: $name ($dir) is not a directory"
515 # base fs may not be mounted yet, so just check that parent dir
516 # exists (where base fs will be mounted) because we are going to
517 # mkdir the overlay mount point dir anyway
518 local base=`basename $dir`
519 local parent=`dirname $dir`
520 parent=`_canonicalize_mountpoint OVL_BASE_$name "$parent"`
522 # prepend the overlay mount point to canonical parent path
526 # On check -overlay, for the non multi section config case, this
527 # function is called on every test, before init_rc().
528 # When SCRATCH/TEST_* vars are defined in config file, config file
529 # is sourced on every test and this function overrides the vars
531 # When SCRATCH/TEST_* vars are defined in evironment and not
532 # in config file, this function is called after vars have already
533 # been overriden in the previous test.
534 # In that case, TEST_DEV is a directory and not a blockdev and
535 # the function will return without overriding the SCRATCH/TEST_* vars.
536 _overlay_config_override()
538 # There are 2 options for configuring overlayfs tests:
540 # 1. (legacy) SCRATCH/TEST_DEV point to existing directories
541 # on an already mounted fs. In this case, the new
542 # OVL_BASE_SCRATCH/TEST_* vars are set to use the legacy
543 # vars values (even though they may not be mount points).
545 [ ! -d "$TEST_DEV" ] || export OVL_BASE_TEST_DIR="$TEST_DEV"
546 [ ! -d "$SCRATCH_DEV" ] || export OVL_BASE_SCRATCH_MNT="$SCRATCH_DEV"
548 # 2. SCRATCH/TEST_DEV point to the base fs partitions. In this case,
549 # the new OVL_BASE_SCRATCH/TEST_DEV/MNT vars are set to the values
550 # of the configured base fs and SCRATCH/TEST_DEV vars are set to the
551 # overlayfs base and mount dirs inside base fs mount.
552 [ -b "$TEST_DEV" ] || return 0
554 # Config file may specify base fs type, but we obay -overlay flag
555 [ "$FSTYP" == overlay ] || export OVL_BASE_FSTYP="$FSTYP"
558 # Store original base fs vars
559 export OVL_BASE_TEST_DEV="$TEST_DEV"
560 export OVL_BASE_TEST_DIR="$TEST_DIR"
561 # If config does not set MOUNT_OPTIONS, its value may be
562 # leftover from previous _overlay_config_override, so
563 # don't use that value for base fs mount
564 [ "$MOUNT_OPTIONS" != "$OVERLAY_MOUNT_OPTIONS" ] || unset MOUNT_OPTIONS
565 export OVL_BASE_MOUNT_OPTIONS="$MOUNT_OPTIONS"
567 # Set TEST vars to overlay base and mount dirs inside base fs
568 export TEST_DEV="$OVL_BASE_TEST_DIR"
569 export TEST_DIR="$OVL_BASE_TEST_DIR/$OVL_MNT"
570 export MOUNT_OPTIONS="$OVERLAY_MOUNT_OPTIONS"
572 [ -b "$SCRATCH_DEV" ] || return 0
574 # Store original base fs vars
575 export OVL_BASE_SCRATCH_DEV="$SCRATCH_DEV"
576 export OVL_BASE_SCRATCH_MNT="$SCRATCH_MNT"
578 # Set SCRATCH vars to overlay base and mount dirs inside base fs
579 export SCRATCH_DEV="$OVL_BASE_SCRATCH_MNT"
580 export SCRATCH_MNT="$OVL_BASE_SCRATCH_MNT/$OVL_MNT"
582 # Set fsck options, use default if user not set directly.
583 export FSCK_OPTIONS="$OVERLAY_FSCK_OPTIONS"
584 [ -z "$FSCK_OPTIONS" ] && _fsck_opts
587 _overlay_config_restore()
590 [ -z "$OVL_BASE_FSTYP" ] || export FSTYP=$OVL_BASE_FSTYP
591 [ -z "$OVL_BASE_TEST_DEV" ] || export TEST_DEV=$OVL_BASE_TEST_DEV
592 [ -z "$OVL_BASE_TEST_DIR" ] || export TEST_DIR=$OVL_BASE_TEST_DIR
593 [ -z "$OVL_BASE_SCRATCH_DEV" ] || export SCRATCH_DEV=$OVL_BASE_SCRATCH_DEV
594 [ -z "$OVL_BASE_SCRATCH_MNT" ] || export SCRATCH_MNT=$OVL_BASE_SCRATCH_MNT
595 [ -z "$OVL_BASE_MOUNT_OPTIONS" ] || export MOUNT_OPTIONS=$OVL_BASE_MOUNT_OPTIONS
598 # Parse config section options. This function will parse all the configuration
599 # within a single section which name is passed as an argument. For section
600 # name format see comments in get_config_sections().
601 # Empty lines and everything after '#' will be ignored.
602 # Configuration options should be defined in the format
604 # CONFIG_OPTION=value
606 # This 'CONFIG_OPTION' variable and will be exported as an environment variable.
607 parse_config_section() {
609 if ! $OPTIONS_HAVE_SECTIONS; then
612 eval `sed -e 's/[[:space:]]*\=[[:space:]]*/=/g' \
614 -e 's/[[:space:]]*$//' \
615 -e 's/^[[:space:]]*//' \
616 -e "s/^\([^=]*\)=\"\?'\?\([^\"']*\)\"\?'\?$/export \1=\"\2\"/" \
618 | sed -n -e "/^\[$SECTION\]/,/^\s*\[/{/^[^#].*\=.*/p;}"`
622 if [ ! -z "$CONFIG_INCLUDED" ] && ! $OPTIONS_HAVE_SECTIONS; then
626 # We might have overriden FSTYP and TEST/SCRATCH vars with overlay values
627 # in the previous section, so restore them to original values stored in
629 # We need to do this *before* old FSTYP and MOUNT_OPTIONS are recorded
630 # and *before* SCRATCH_DEV and MOUNT_OPTIONS are unset
631 if [ "$FSTYP" == "overlay" ]; then
632 _overlay_config_restore
635 local OLD_FSTYP=$FSTYP
636 local OLD_MOUNT_OPTIONS=$MOUNT_OPTIONS
637 local OLD_TEST_FS_MOUNT_OPTS=$TEST_FS_MOUNT_OPTS
638 local OLD_MKFS_OPTIONS=$MKFS_OPTIONS
639 local OLD_FSCK_OPTIONS=$FSCK_OPTIONS
640 local OLD_USE_EXTERNAL=$USE_EXTERNAL
643 unset TEST_FS_MOUNT_OPTS
648 # We might have deduced SCRATCH_DEV from the SCRATCH_DEV_POOL in the previous
649 # run, so we have to unset it now.
650 if [ "$SCRATCH_DEV_NOT_SET" == "true" ]; then
654 parse_config_section $1
656 if [ ! -z "$OLD_FSTYP" ] && [ $OLD_FSTYP != $FSTYP ]; then
657 [ -z "$MOUNT_OPTIONS" ] && _mount_opts
658 [ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
659 [ -z "$MKFS_OPTIONS" ] && _mkfs_opts
660 [ -z "$FSCK_OPTIONS" ] && _fsck_opts
662 # clear the external devices if we are not using them
663 if [ -z "$USE_EXTERNAL" ]; then
670 [ -z "$MOUNT_OPTIONS" ] && export MOUNT_OPTIONS=$OLD_MOUNT_OPTIONS
671 [ -z "$TEST_FS_MOUNT_OPTS" ] && export TEST_FS_MOUNT_OPTS=$OLD_TEST_FS_MOUNT_OPTS
672 [ -z "$MKFS_OPTIONS" ] && export MKFS_OPTIONS=$OLD_MKFS_OPTIONS
673 [ -z "$FSCK_OPTIONS" ] && export FSCK_OPTIONS=$OLD_FSCK_OPTIONS
674 [ -z "$USE_EXTERNAL" ] && export USE_EXTERNAL=$OLD_USE_EXTERNAL
677 # set default RESULT_BASE
678 if [ -z "$RESULT_BASE" ]; then
679 export RESULT_BASE="$here/results/"
682 if [ "$FSTYP" == "tmpfs" ]; then
683 if [ -z "TEST_DEV" ]; then
684 export TEST_DEV=tmpfs_test
686 if [ -z "SCRATCH_DEV" ]; then
687 export TEST_DEV=tmpfs_scratch
691 # Mandatory Config values.
693 [ -z "$EMAIL" ] && MC="$MC EMAIL"
694 [ -z "$TEST_DIR" ] && MC="$MC TEST_DIR"
695 [ -z "$TEST_DEV" ] && MC="$MC TEST_DEV"
697 if [ -n "$MC" ]; then
698 echo "Warning: need to define parameters for host $HOST"
699 echo " or set variables:"
704 _check_device TEST_DEV required $TEST_DEV
705 export TEST_DIR=`_canonicalize_mountpoint TEST_DIR $TEST_DIR`
707 # a btrfs tester will set only SCRATCH_DEV_POOL, we will put first of its dev
708 # to SCRATCH_DEV and rest to SCRATCH_DEV_POOL to maintain the backward compatibility
709 if [ ! -z "$SCRATCH_DEV_POOL" ]; then
710 if [ ! -z "$SCRATCH_DEV" ]; then
711 echo "common/config: Error: \$SCRATCH_DEV ($SCRATCH_DEV) should be unset when \$SCRATCH_DEV_POOL ($SCRATCH_DEV_POOL) is set"
714 SCRATCH_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'`
716 export SCRATCH_DEV_NOT_SET=true
719 _check_device SCRATCH_DEV optional $SCRATCH_DEV
720 export SCRATCH_MNT=`_canonicalize_mountpoint SCRATCH_MNT $SCRATCH_MNT`
722 if [ -n "$USE_EXTERNAL" ]; then
723 _check_device TEST_RTDEV optional $TEST_RTDEV
724 _check_device TEST_LOGDEV optional $TEST_LOGDEV
725 _check_device SCRATCH_RTDEV optional $SCRATCH_RTDEV
726 _check_device SCRATCH_LOGDEV optional $SCRATCH_LOGDEV
729 # Override FSTYP from config when running ./check -overlay
730 # and maybe override base fs TEST/SCRATCH_DEV with overlay base dirs.
731 # We need to do this *after* default mount options are set by base FSTYP
732 # and *after* SCRATCH_DEV is deduced from SCRATCH_DEV_POOL
733 if [ "$OVERLAY" == "true" -o "$FSTYP" == "overlay" ]; then
734 _overlay_config_override
738 if [ -z "$CONFIG_INCLUDED" ]; then
739 get_next_config `echo $HOST_OPTIONS_SECTIONS | cut -f1 -d" "`
740 export CONFIG_INCLUDED=true
742 # Autodetect fs type based on what's on $TEST_DEV unless it's been set
744 if [ -z "$FSTYP" ] && \
745 [ "$HOSTOS" == "Linux" -o "$OSTYPE" == "linux-gnu" ] && \
746 [ ! -z "$TEST_DEV" ]; then
747 FSTYP=`blkid -c /dev/null -s TYPE -o value $TEST_DEV`
751 [ -z "$MOUNT_OPTIONS" ] && _mount_opts
752 [ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
753 [ -z "$MKFS_OPTIONS" ] && _mkfs_opts
754 [ -z "$FSCK_OPTIONS" ] && _fsck_opts
756 # We get here for the non multi section case, on every test that sources
757 # common/rc after re-sourcing the HOST_OPTIONS config file.
758 # Because of this re-sourcing, we need to re-canonicalize the configured
759 # mount points and re-override TEST/SCRATCH_DEV overlay vars.
761 # canonicalize the mount points
762 # this follows symlinks and removes all trailing "/"s
763 export TEST_DIR=`_canonicalize_mountpoint TEST_DIR $TEST_DIR`
764 export SCRATCH_MNT=`_canonicalize_mountpoint SCRATCH_MNT $SCRATCH_MNT`
766 # Override FSTYP from config when running ./check -overlay
767 # and maybe override base fs TEST/SCRATCH_DEV with overlay base dirs
768 if [ "$OVERLAY" == "true" -o "$FSTYP" == "overlay" ]; then
769 _overlay_config_override
773 # make sure this script returns success