2 # SPDX-License-Identifier: GPL-2.0
3 # Copyright (c) 2000-2003,2006 Silicon Graphics, Inc. All Rights Reserved.
5 # setup and check for config parameters, and in particular
7 # EMAIL - email of the script runner.
8 # TEST_DIR - scratch test directory that is in an already
9 # mounted XFS file system, needs to be be world
11 # TEST_DEV - device for file system containing TEST_DIR
14 # SCRATCH_DEV - device you can make a scratch file system on
15 # SCRATCH_MNT - mount point for scratch file system
16 # SCRATCH_LOGDEV - scratch log device for external log testing
17 # SCRATCH_RTDEV - scratch rt dev
18 # TEST_LOGDEV - test log device for external log testing
19 # TEST_RTDEV - test rt dev
20 # TAPE_DEV - the tape device for the xfsdump tests
21 # RMT_TAPE_DEV - the remote tape device for the xfsdump tests
22 # RMT_IRIXTAPE_DEV- the IRIX remote tape device for the xfsdump tests
23 # RMT_TAPE_USER - remote user for tape device
24 # SELINUX_MOUNT_OPTIONS - Options to use when SELinux is enabled.
26 # - These can be added to $HOST_CONFIG_DIR (witch default to ./config)
27 # below or a separate local configuration file can be used (using
28 # the HOST_OPTIONS variable).
29 # - This script is shared by the stress test system and the auto-qa
31 # - TEST_DEV & TEST_DIR must be assigned.
32 # - this script shouldn't make any assertions about filesystem
33 # validity or mountedness.
38 # all tests should use a common language setting to prevent golden
45 export HOST=`hostname -s`
46 export HOSTOS=`uname -s`
48 export MODULAR=0 # using XFS as a module or not
49 export BOOT="/boot" # install target for kernels
50 export EXTRA=${EXTRA:=xfs-qa}
52 # general parameters (mainly for auto-qa)
53 export SOAK_PROC=3 # -p option to fsstress
54 export SOAK_STRESS=10000 # -n option to fsstress
55 export SOAK_PASSES=-1 # count of repetitions of fsstress (while soaking)
56 export EMAIL=root@localhost # where auto-qa will send its status messages
57 export HOST_OPTIONS=${HOST_OPTIONS:=local.config}
58 export CHECK_OPTIONS=${CHECK_OPTIONS:="-g auto"}
59 export BENCH_PASSES=${BENCH_PASSES:=5}
60 export XFS_MKFS_OPTIONS=${XFS_MKFS_OPTIONS:=-bsize=4096}
61 export TIME_FACTOR=${TIME_FACTOR:=1}
62 export LOAD_FACTOR=${LOAD_FACTOR:=1}
63 export DEBUGFS_MNT=${DEBUGFS_MNT:="/sys/kernel/debug"}
65 # some constants for overlayfs setup
66 export OVL_UPPER="ovl-upper"
67 export OVL_LOWER="ovl-lower"
68 export OVL_WORK="ovl-work"
69 # overlay mount point parent must be the base fs root
70 export OVL_MNT="ovl-mnt"
73 #export DEBUG=${DEBUG:=...} # arbitrary CFLAGS really.
74 export MALLOCLIB=${MALLOCLIB:=/usr/lib/libefence.a}
75 export LOCAL_CONFIGURE_OPTIONS=${LOCAL_CONFIGURE_OPTIONS:=--enable-readline=yes}
77 export RECREATE_TEST_DEV=false
79 # Handle mkfs.$fstyp which does (or does not) require -f to overwrite
80 set_mkfs_prog_path_with_opts()
83 local p=$(type -P mkfs.$fstyp)
85 # Note: mkfs.f2fs doesn't support the --help option yet, but it doesn't
86 # matter since it also prints the help when an invalid option is given.
87 if [ "$p" != "" ] && \
88 $p --help |& grep -q "[[:space:]]-f[[:space:]|]"; then
102 export MKFS_PROG="$(type -P mkfs)"
103 [ "$MKFS_PROG" = "" ] && _fatal "mkfs not found"
105 export MOUNT_PROG="$(type -P mount)"
106 [ "$MOUNT_PROG" = "" ] && _fatal "mount not found"
108 export UMOUNT_PROG="$(type -P umount)"
109 [ "$UMOUNT_PROG" = "" ] && _fatal "umount not found"
111 export FSSTRESS_PROG="./ltp/fsstress"
112 [ ! -x $FSSTRESS_PROG ] && _fatal "fsstress not found or executable"
114 export PERL_PROG="$(type -P perl)"
115 [ "$PERL_PROG" = "" ] && _fatal "perl not found"
117 export AWK_PROG="$(type -P awk)"
118 [ "$AWK_PROG" = "" ] && _fatal "awk not found"
120 export SED_PROG="$(type -P sed)"
121 [ "$SED_PROG" = "" ] && _fatal "sed not found"
123 export BC_PROG="$(type -P bc)"
124 [ "$BC_PROG" = "" ] && _fatal "bc not found"
126 export PS_ALL_FLAGS="-ef"
128 export DF_PROG="$(type -P df)"
129 [ "$DF_PROG" = "" ] && _fatal "df not found"
130 [ "$HOSTOS" = "Linux" ] && export DF_PROG="$DF_PROG -T -P"
132 export XFS_IO_PROG="$(type -P xfs_io)"
133 [ "$XFS_IO_PROG" = "" ] && _fatal "xfs_io not found"
135 export XFS_LOGPRINT_PROG="$(type -P xfs_logprint)"
136 export XFS_REPAIR_PROG="$(type -P xfs_repair)"
137 export XFS_DB_PROG="$(type -P xfs_db)"
138 export XFS_GROWFS_PROG=$(type -P xfs_growfs)
139 export XFS_SPACEMAN_PROG="$(type -P xfs_spaceman)"
140 export XFS_SCRUB_PROG="$(type -P xfs_scrub)"
141 export XFS_PARALLEL_REPAIR_PROG="$(type -P xfs_prepair)"
142 export XFS_PARALLEL_REPAIR64_PROG="$(type -P xfs_prepair64)"
143 export __XFSDUMP_PROG="$(type -P xfsdump)"
144 if [ -n "$__XFSDUMP_PROG" ]; then
145 export XFSDUMP_PROG="$__XFSDUMP_PROG -e"
147 export XFSDUMP_PROG=""
149 export XFSRESTORE_PROG="$(type -P xfsrestore)"
150 export XFSINVUTIL_PROG="$(type -P xfsinvutil)"
151 export GETFATTR_PROG="$(type -P getfattr)"
152 export SETFATTR_PROG="$(type -P setfattr)"
153 export CHACL_PROG="$(type -P chacl)"
154 export ATTR_PROG="$(type -P attr)"
155 export QUOTA_PROG="$(type -P quota)"
156 export XFS_QUOTA_PROG="$(type -P xfs_quota)"
157 export KILLALL_PROG="$(type -P killall)"
158 export INDENT_PROG="$(type -P indent)"
159 export XFS_COPY_PROG="$(type -P xfs_copy)"
160 export FSTRIM_PROG="$(type -P fstrim)"
161 export DUMPE2FS_PROG="$(type -P dumpe2fs)"
162 export RESIZE2FS_PROG="$(type -P resize2fs)"
163 export FIO_PROG="$(type -P fio)"
164 export FILEFRAG_PROG="$(type -P filefrag)"
165 export E4DEFRAG_PROG="$(type -P e4defrag)"
166 export LOGGER_PROG="$(type -P logger)"
167 export DBENCH_PROG="$(type -P dbench)"
168 export DMSETUP_PROG="$(type -P dmsetup)"
169 export WIPEFS_PROG="$(type -P wipefs)"
170 export DUMP_PROG="$(type -P dump)"
171 export RESTORE_PROG="$(type -P restore)"
172 export LVM_PROG="$(type -P lvm)"
173 export CHATTR_PROG="$(type -P chattr)"
174 export DEBUGFS_PROG="$(type -P debugfs)"
175 export UUIDGEN_PROG="$(type -P uuidgen)"
176 export GETRICHACL_PROG="$(type -P getrichacl)"
177 export SETRICHACL_PROG="$(type -P setrichacl)"
178 export KEYCTL_PROG="$(type -P keyctl)"
179 export XZ_PROG="$(type -P xz)"
180 export FLOCK_PROG="$(type -P flock)"
181 export LDD_PROG="$(type -P ldd)"
182 export TIMEOUT_PROG="$(type -P timeout)"
183 export MAN_PROG="$(type -P man)"
184 export NFS4_SETFACL_PROG="$(type -P nfs4_setfacl)"
185 export NFS4_GETFACL_PROG="$(type -P nfs4_getfacl)"
186 export UBIUPDATEVOL_PROG="$(type -P ubiupdatevol)"
187 export THIN_CHECK_PROG="$(type -P thin_check)"
188 export PYTHON2_PROG="$(type -P python2)"
189 export SQLITE3_PROG="$(type -P sqlite3)"
190 export TIMEOUT_PROG="$(type -P timeout)"
191 export SETCAP_PROG="$(type -P setcap)"
192 export GETCAP_PROG="$(type -P getcap)"
193 export CHECKBASHISMS_PROG="$(type -P checkbashisms)"
194 export XFS_INFO_PROG="$(type -P xfs_info)"
195 export DUPEREMOVE_PROG="$(type -P duperemove)"
197 # use 'udevadm settle' or 'udevsettle' to wait for lv to be settled.
198 # newer systems have udevadm command but older systems like RHEL5 don't.
199 # But if neither one is available, just set it to "sleep 1" to wait for lv to
201 UDEV_SETTLE_PROG="$(type -P udevadm)"
202 if [ "$UDEV_SETTLE_PROG" == "" ]; then
203 # try udevsettle command
204 UDEV_SETTLE_PROG="$(type -P udevsettle)"
206 # udevadm is available, add 'settle' as subcommand
207 UDEV_SETTLE_PROG="$UDEV_SETTLE_PROG settle"
209 # neither command is available, use sleep 1
210 if [ "$UDEV_SETTLE_PROG" == "" ]; then
211 UDEV_SETTLE_PROG="sleep 1"
213 export UDEV_SETTLE_PROG
217 export MKFS_XFS_PROG=$(type -P mkfs.xfs)
218 export MKFS_EXT4_PROG=$(type -P mkfs.ext4)
219 export MKFS_UDF_PROG=$(type -P mkudffs)
220 export MKFS_BTRFS_PROG=$(set_mkfs_prog_path_with_opts btrfs)
221 export MKFS_F2FS_PROG=$(set_mkfs_prog_path_with_opts f2fs)
222 export DUMP_F2FS_PROG=$(type -P dump.f2fs)
223 export BTRFS_UTIL_PROG=$(type -P btrfs)
224 export BTRFS_SHOW_SUPER_PROG=$(type -P btrfs-show-super)
225 export BTRFS_CONVERT_PROG=$(type -P btrfs-convert)
226 export BTRFS_TUNE_PROG=$(type -P btrfstune)
227 export XFS_FSR_PROG=$(type -P xfs_fsr)
228 export MKFS_NFS_PROG="false"
229 export MKFS_CIFS_PROG="false"
230 export MKFS_OVERLAY_PROG="false"
231 export MKFS_REISER4_PROG=$(type -P mkfs.reiser4)
232 export E2FSCK_PROG=$(type -P e2fsck)
233 export TUNE2FS_PROG=$(type -P tune2fs)
234 export FSCK_OVERLAY_PROG=$(type -P fsck.overlay)
238 # SELinux adds extra xattrs which can mess up our expected output.
239 # So, mount with a context, and they won't be created.
241 # Since the context= option only accepts contexts defined in the SELinux
242 # policy, and different systems may have different policies with
243 # different context names, use the context of an existing directory.
244 # Assume that any valid context is fine, since xfstests should really
245 # only be run from an "unconfined" process, or with SELinux in permissive
246 # mode. But if not, just specify your own SELINUX_MOUNT_OPTIONS.
247 if [ -x /usr/sbin/selinuxenabled ] && /usr/sbin/selinuxenabled; then
248 : ${SELINUX_MOUNT_OPTIONS:="-o context=$(stat -c %C /)"}
249 export SELINUX_MOUNT_OPTIONS
252 # check if mkfs.xfs supports v5 xfs
253 XFS_MKFS_HAS_NO_META_SUPPORT=""
254 touch /tmp/crc_check.img
255 $MKFS_XFS_PROG -N -d file,name=/tmp/crc_check.img,size=32m -m crc=0 \
257 if [ $? -ne 0 ]; then
258 XFS_MKFS_HAS_NO_META_SUPPORT=true
260 rm -f /tmp/crc_check.img
261 export XFS_MKFS_HAS_NO_META_SUPPORT
267 export MOUNT_OPTIONS=$PLAN9_MOUNT_OPTIONS
270 export MOUNT_OPTIONS=$XFS_MOUNT_OPTIONS
273 export MOUNT_OPTIONS=$UDF_MOUNT_OPTIONS
276 export MOUNT_OPTIONS=$NFS_MOUNT_OPTIONS
279 export MOUNT_OPTIONS=$CIFS_MOUNT_OPTIONS
282 export MOUNT_OPTIONS=$CEPHFS_MOUNT_OPTIONS
285 export MOUNT_OPTIONS=$GLUSTERFS_MOUNT_OPTIONS
288 export MOUNT_OPTIONS=$OVERLAY_MOUNT_OPTIONS
290 ext2|ext3|ext4|ext4dev)
291 # acls & xattrs aren't turned on by default on ext$FOO
292 export MOUNT_OPTIONS="-o acl,user_xattr $EXT_MOUNT_OPTIONS"
295 export MOUNT_OPTIONS="-o acl,user_xattr $F2FS_MOUNT_OPTIONS"
298 # acls & xattrs aren't turned on by default on reiserfs
299 export MOUNT_OPTIONS="-o acl,user_xattr $REISERFS_MOUNT_OPTIONS"
302 # acls & xattrs aren't supported by reiser4
303 export MOUNT_OPTIONS=$REISER4_MOUNT_OPTIONS
306 # acls aren't turned on by default on gfs2
307 export MOUNT_OPTIONS="-o acl $GFS2_MOUNT_OPTIONS"
310 # We need to specify the size at mount, use 1G by default
311 export MOUNT_OPTIONS="-o size=1G $TMPFS_MOUNT_OPTIONS"
314 export MOUNT_OPTIONS=$UBIFS_MOUNT_OPTIONS
325 export TEST_FS_MOUNT_OPTS=$PLAN9_MOUNT_OPTIONS
328 export TEST_FS_MOUNT_OPTS=$CIFS_MOUNT_OPTIONS
331 export TEST_FS_MOUNT_OPTS=$CEPHFS_MOUNT_OPTIONS
334 export TEST_FS_MOUNT_OPTS=$NFS_MOUNT_OPTIONS
337 export TEST_FS_MOUNT_OPTS=$GLUSTERFS_MOUNT_OPTIONS
339 ext2|ext3|ext4|ext4dev)
340 # acls & xattrs aren't turned on by default on older ext$FOO
341 export TEST_FS_MOUNT_OPTS="-o acl,user_xattr $EXT_MOUNT_OPTIONS"
352 export MKFS_OPTIONS=$XFS_MKFS_OPTIONS
355 [ ! -z "$udf_fsize" ] && \
356 UDF_MKFS_OPTIONS="$UDF_MKFS_OPTIONS -s $udf_fsize"
357 export MKFS_OPTIONS=$UDF_MKFS_OPTIONS
360 export MKFS_OPTIONS=$NFS_MKFS_OPTIONS
363 export MKFS_OPTIONS=$CIFS_MKFS_OPTIONS
366 export MKFS_OPTIONS=$CEPHFS_MKFS_OPTIONS
369 export MKFS_OPTIONS="$REISERFS_MKFS_OPTIONS -q"
372 export MKFS_OPTIONS=$REISER4_MKFS_OPTIONS
375 export MKFS_OPTIONS="$GFS2_MKFS_OPTIONS -O -p lock_nolock"
378 export MKFS_OPTIONS="$JFS_MKFS_OPTIONS -q"
381 export MKFS_OPTIONS="$F2FS_MKFS_OPTIONS"
391 ext2|ext3|ext4|ext4dev)
392 export FSCK_OPTIONS="-nf"
395 export FSCK_OPTIONS="--yes"
398 export FSCK_OPTIONS=""
401 export FSCK_OPTIONS="-n"
408 [ "$HOST_CONFIG_DIR" ] || HOST_CONFIG_DIR=`pwd`/configs
410 [ -f /etc/xfsqa.config ] && export HOST_OPTIONS=/etc/xfsqa.config
411 [ -f $HOST_CONFIG_DIR/$HOST ] && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST
412 [ -f $HOST_CONFIG_DIR/$HOST.config ] && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST.config
415 # Returns a list of sections in config file
416 # Each section starts with the section name in the format
417 # [section_name1]. Only alphanumeric characters and '_' is allowed
418 # in the section name otherwise the section will not be resognised.
419 # Section name must be contained between square brackets.
420 get_config_sections() {
421 sed -n -e "s/^\[\([[:alnum:]_]*\)\]/\1/p" < $1
424 if [ ! -f "$HOST_OPTIONS" ]; then
428 export HOST_OPTIONS_SECTIONS="-no-sections-"
429 export OPTIONS_HAVE_SECTIONS=false
430 if [ -f "$HOST_OPTIONS" ]; then
431 export HOST_OPTIONS_SECTIONS=`get_config_sections $HOST_OPTIONS`
432 if [ -z "$HOST_OPTIONS_SECTIONS" ]; then
434 export HOST_OPTIONS_SECTIONS="-no-sections-"
436 export OPTIONS_HAVE_SECTIONS=true
446 if [ -z "$dev" ]; then
447 if [ "$dev_needed" == "required" ]; then
448 _fatal "common/config: $name is required but not defined!"
453 if [ -b "$dev" ] || ( echo $dev | grep -qE ":|//" ); then
454 # block device or a network url
460 # 9p mount tags are just plain strings, so anything is allowed
463 if [ ! -d "$dev" ]; then
464 _fatal "common/config: $name ($dev) is not a directory for overlay"
468 if [ ! -c "$dev" ]; then
469 _fatal "common/config: $name ($dev) is not a character device"
473 _fatal "common/config: $name ($dev) is not a block device or a network filesystem"
477 # check and return a canonical mount point path
478 _canonicalize_mountpoint()
483 if [ -d "$dir" ]; then
484 # this follows symlinks and removes all trailing "/"s
489 if [ "$FSTYP" != "overlay" ] || [[ "$name" == OVL_BASE_* ]]; then
490 _fatal "common/config: $name ($dir) is not a directory"
493 # base fs may not be mounted yet, so just check that parent dir
494 # exists (where base fs will be mounted) because we are going to
495 # mkdir the overlay mount point dir anyway
496 local base=`basename $dir`
497 local parent=`dirname $dir`
498 parent=`_canonicalize_mountpoint OVL_BASE_$name "$parent"`
500 # prepend the overlay mount point to canonical parent path
504 # On check -overlay, for the non multi section config case, this
505 # function is called on every test, before init_rc().
506 # When SCRATCH/TEST_* vars are defined in config file, config file
507 # is sourced on every test and this function overrides the vars
509 # When SCRATCH/TEST_* vars are defined in evironment and not
510 # in config file, this function is called after vars have already
511 # been overriden in the previous test.
512 # In that case, TEST_DEV is a directory and not a blockdev and
513 # the function will return without overriding the SCRATCH/TEST_* vars.
514 _overlay_config_override()
516 # There are 2 options for configuring overlayfs tests:
518 # 1. (legacy) SCRATCH/TEST_DEV point to existing directories
519 # on an already mounted fs. In this case, the new
520 # OVL_BASE_SCRATCH/TEST_* vars are set to use the legacy
521 # vars values (even though they may not be mount points).
523 [ ! -d "$TEST_DEV" ] || export OVL_BASE_TEST_DIR="$TEST_DEV"
524 [ ! -d "$SCRATCH_DEV" ] || export OVL_BASE_SCRATCH_MNT="$SCRATCH_DEV"
526 # 2. SCRATCH/TEST_DEV point to the base fs partitions. In this case,
527 # the new OVL_BASE_SCRATCH/TEST_DEV/MNT vars are set to the values
528 # of the configured base fs and SCRATCH/TEST_DEV vars are set to the
529 # overlayfs base and mount dirs inside base fs mount.
530 [ -b "$TEST_DEV" ] || return 0
532 # Config file may specify base fs type, but we obay -overlay flag
533 [ "$FSTYP" == overlay ] || export OVL_BASE_FSTYP="$FSTYP"
536 # Store original base fs vars
537 export OVL_BASE_TEST_DEV="$TEST_DEV"
538 export OVL_BASE_TEST_DIR="$TEST_DIR"
539 # If config does not set MOUNT_OPTIONS, its value may be
540 # leftover from previous _overlay_config_override, so
541 # don't use that value for base fs mount
542 [ "$MOUNT_OPTIONS" != "$OVERLAY_MOUNT_OPTIONS" ] || unset MOUNT_OPTIONS
543 export OVL_BASE_MOUNT_OPTIONS="$MOUNT_OPTIONS"
545 # Set TEST vars to overlay base and mount dirs inside base fs
546 export TEST_DEV="$OVL_BASE_TEST_DIR"
547 export TEST_DIR="$OVL_BASE_TEST_DIR/$OVL_MNT"
548 export MOUNT_OPTIONS="$OVERLAY_MOUNT_OPTIONS"
550 [ -b "$SCRATCH_DEV" ] || return 0
552 # Store original base fs vars
553 export OVL_BASE_SCRATCH_DEV="$SCRATCH_DEV"
554 export OVL_BASE_SCRATCH_MNT="$SCRATCH_MNT"
556 # Set SCRATCH vars to overlay base and mount dirs inside base fs
557 export SCRATCH_DEV="$OVL_BASE_SCRATCH_MNT"
558 export SCRATCH_MNT="$OVL_BASE_SCRATCH_MNT/$OVL_MNT"
560 # Set fsck options, use default if user not set directly.
561 export FSCK_OPTIONS="$OVERLAY_FSCK_OPTIONS"
562 [ -z "$FSCK_OPTIONS" ] && _fsck_opts
565 _overlay_config_restore()
568 [ -z "$OVL_BASE_FSTYP" ] || export FSTYP=$OVL_BASE_FSTYP
569 [ -z "$OVL_BASE_TEST_DEV" ] || export TEST_DEV=$OVL_BASE_TEST_DEV
570 [ -z "$OVL_BASE_TEST_DIR" ] || export TEST_DIR=$OVL_BASE_TEST_DIR
571 [ -z "$OVL_BASE_SCRATCH_DEV" ] || export SCRATCH_DEV=$OVL_BASE_SCRATCH_DEV
572 [ -z "$OVL_BASE_SCRATCH_MNT" ] || export SCRATCH_MNT=$OVL_BASE_SCRATCH_MNT
573 [ -z "$OVL_BASE_MOUNT_OPTIONS" ] || export MOUNT_OPTIONS=$OVL_BASE_MOUNT_OPTIONS
576 # Parse config section options. This function will parse all the configuration
577 # within a single section which name is passed as an argument. For section
578 # name format see comments in get_config_sections().
579 # Empty lines and everything after '#' will be ignored.
580 # Configuration options should be defined in the format
582 # CONFIG_OPTION=value
584 # This 'CONFIG_OPTION' variable and will be exported as an environment variable.
585 parse_config_section() {
587 if ! $OPTIONS_HAVE_SECTIONS; then
590 eval `sed -e 's/[[:space:]]*\=[[:space:]]*/=/g' \
592 -e 's/[[:space:]]*$//' \
593 -e 's/^[[:space:]]*//' \
594 -e "s/^\([^=]*\)=\"\?'\?\([^\"']*\)\"\?'\?$/export \1=\"\2\"/" \
596 | sed -n -e "/^\[$SECTION\]/,/^\s*\[/{/^[^#].*\=.*/p;}"`
600 if [ ! -z "$CONFIG_INCLUDED" ] && ! $OPTIONS_HAVE_SECTIONS; then
604 # We might have overriden FSTYP and TEST/SCRATCH vars with overlay values
605 # in the previous section, so restore them to original values stored in
607 # We need to do this *before* old FSTYP and MOUNT_OPTIONS are recorded
608 # and *before* SCRATCH_DEV and MOUNT_OPTIONS are unset
609 if [ "$FSTYP" == "overlay" ]; then
610 _overlay_config_restore
613 local OLD_FSTYP=$FSTYP
614 local OLD_MOUNT_OPTIONS=$MOUNT_OPTIONS
615 local OLD_TEST_FS_MOUNT_OPTS=$TEST_FS_MOUNT_OPTS
616 local OLD_MKFS_OPTIONS=$MKFS_OPTIONS
617 local OLD_FSCK_OPTIONS=$FSCK_OPTIONS
618 local OLD_USE_EXTERNAL=$USE_EXTERNAL
621 unset TEST_FS_MOUNT_OPTS
626 # We might have deduced SCRATCH_DEV from the SCRATCH_DEV_POOL in the previous
627 # run, so we have to unset it now.
628 if [ "$SCRATCH_DEV_NOT_SET" == "true" ]; then
632 parse_config_section $1
634 if [ ! -z "$OLD_FSTYP" ] && [ $OLD_FSTYP != $FSTYP ]; then
635 [ -z "$MOUNT_OPTIONS" ] && _mount_opts
636 [ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
637 [ -z "$MKFS_OPTIONS" ] && _mkfs_opts
638 [ -z "$FSCK_OPTIONS" ] && _fsck_opts
640 # clear the external devices if we are not using them
641 if [ -z "$USE_EXTERNAL" ]; then
648 [ -z "$MOUNT_OPTIONS" ] && export MOUNT_OPTIONS=$OLD_MOUNT_OPTIONS
649 [ -z "$TEST_FS_MOUNT_OPTS" ] && export TEST_FS_MOUNT_OPTS=$OLD_TEST_FS_MOUNT_OPTS
650 [ -z "$MKFS_OPTIONS" ] && export MKFS_OPTIONS=$OLD_MKFS_OPTIONS
651 [ -z "$FSCK_OPTIONS" ] && export FSCK_OPTIONS=$OLD_FSCK_OPTIONS
652 [ -z "$USE_EXTERNAL" ] && export USE_EXTERNAL=$OLD_USE_EXTERNAL
655 # set default RESULT_BASE
656 if [ -z "$RESULT_BASE" ]; then
657 export RESULT_BASE="$here/results/"
660 # Mandatory Config values.
662 [ -z "$EMAIL" ] && MC="$MC EMAIL"
663 [ -z "$TEST_DIR" ] && MC="$MC TEST_DIR"
664 [ -z "$TEST_DEV" ] && MC="$MC TEST_DEV"
666 if [ -n "$MC" ]; then
667 echo "Warning: need to define parameters for host $HOST"
668 echo " or set variables:"
673 _check_device TEST_DEV required $TEST_DEV
674 export TEST_DIR=`_canonicalize_mountpoint TEST_DIR $TEST_DIR`
676 # a btrfs tester will set only SCRATCH_DEV_POOL, we will put first of its dev
677 # to SCRATCH_DEV and rest to SCRATCH_DEV_POOL to maintain the backward compatibility
678 if [ ! -z "$SCRATCH_DEV_POOL" ]; then
679 if [ ! -z "$SCRATCH_DEV" ]; then
680 echo "common/config: Error: \$SCRATCH_DEV ($SCRATCH_DEV) should be unset when \$SCRATCH_DEV_POOL ($SCRATCH_DEV_POOL) is set"
683 SCRATCH_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'`
685 export SCRATCH_DEV_NOT_SET=true
688 _check_device SCRATCH_DEV optional $SCRATCH_DEV
689 export SCRATCH_MNT=`_canonicalize_mountpoint SCRATCH_MNT $SCRATCH_MNT`
691 if [ -n "$USE_EXTERNAL" ]; then
692 _check_device TEST_RTDEV optional $TEST_RTDEV
693 _check_device TEST_LOGDEV optional $TEST_LOGDEV
694 _check_device SCRATCH_RTDEV optional $SCRATCH_RTDEV
695 _check_device SCRATCH_LOGDEV optional $SCRATCH_LOGDEV
698 # Override FSTYP from config when running ./check -overlay
699 # and maybe override base fs TEST/SCRATCH_DEV with overlay base dirs.
700 # We need to do this *after* default mount options are set by base FSTYP
701 # and *after* SCRATCH_DEV is deduced from SCRATCH_DEV_POOL
702 if [ "$OVERLAY" == "true" -o "$FSTYP" == "overlay" ]; then
703 _overlay_config_override
707 if [ -z "$CONFIG_INCLUDED" ]; then
708 get_next_config `echo $HOST_OPTIONS_SECTIONS | cut -f1 -d" "`
709 export CONFIG_INCLUDED=true
711 # Autodetect fs type based on what's on $TEST_DEV unless it's been set
713 if [ -z "$FSTYP" ] && \
714 [ "$HOSTOS" == "Linux" -o "$OSTYPE" == "linux-gnu" ] && \
715 [ ! -z "$TEST_DEV" ]; then
716 FSTYP=`blkid -c /dev/null -s TYPE -o value $TEST_DEV`
720 [ -z "$MOUNT_OPTIONS" ] && _mount_opts
721 [ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
722 [ -z "$MKFS_OPTIONS" ] && _mkfs_opts
723 [ -z "$FSCK_OPTIONS" ] && _fsck_opts
725 # We get here for the non multi section case, on every test that sources
726 # common/rc after re-sourcing the HOST_OPTIONS config file.
727 # Because of this re-sourcing, we need to re-canonicalize the configured
728 # mount points and re-override TEST/SCRATCH_DEV overlay vars.
730 # canonicalize the mount points
731 # this follows symlinks and removes all trailing "/"s
732 export TEST_DIR=`_canonicalize_mountpoint TEST_DIR $TEST_DIR`
733 export SCRATCH_MNT=`_canonicalize_mountpoint SCRATCH_MNT $SCRATCH_MNT`
735 # Override FSTYP from config when running ./check -overlay
736 # and maybe override base fs TEST/SCRATCH_DEV with overlay base dirs
737 if [ "$OVERLAY" == "true" -o "$FSTYP" == "overlay" ]; then
738 _overlay_config_override
742 # make sure this script returns success