3 # Copyright (c) 2000-2003,2006 Silicon Graphics, Inc. All Rights Reserved.
5 # This program is free software; you can redistribute it and/or
6 # modify it under the terms of the GNU General Public License as
7 # published by the Free Software Foundation.
9 # This program is distributed in the hope that it would be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 # GNU General Public License for more details.
14 # You should have received a copy of the GNU General Public License
15 # along with this program; if not, write the Free Software Foundation,
16 # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
19 # setup and check for config parameters, and in particular
21 # EMAIL - email of the script runner.
22 # TEST_DIR - scratch test directory that is in an already
23 # mounted XFS file system, needs to be be world
25 # TEST_DEV - device for file system containing TEST_DIR
28 # SCRATCH_DEV - device you can make a scratch file system on
29 # SCRATCH_MNT - mount point for scratch file system
30 # SCRATCH_LOGDEV - scratch log device for external log testing
31 # SCRATCH_RTDEV - scratch rt dev
32 # TEST_LOGDEV - test log device for external log testing
33 # TEST_RTDEV - test rt dev
34 # TAPE_DEV - the tape device for the xfsdump tests
35 # RMT_TAPE_DEV - the remote tape device for the xfsdump tests
36 # RMT_IRIXTAPE_DEV- the IRIX remote tape device for the xfsdump tests
37 # RMT_TAPE_USER - remote user for tape device
38 # SELINUX_MOUNT_OPTIONS - Options to use when SELinux is enabled.
40 # - These can be added to $HOST_CONFIG_DIR (witch default to ./config)
41 # below or a separate local configuration file can be used (using
42 # the HOST_OPTIONS variable).
43 # - This script is shared by the stress test system and the auto-qa
45 # - TEST_DEV & TEST_DIR must be assigned.
46 # - this script shouldn't make any assertions about filesystem
47 # validity or mountedness.
50 # all tests should use a common language setting to prevent golden
57 export HOST=`hostname -s`
58 export HOSTOS=`uname -s`
60 export MODULAR=0 # using XFS as a module or not
61 export BOOT="/boot" # install target for kernels
62 export EXTRA=${EXTRA:=xfs-qa}
64 # general parameters (mainly for auto-qa)
65 export SOAK_PROC=3 # -p option to fsstress
66 export SOAK_STRESS=10000 # -n option to fsstress
67 export SOAK_PASSES=-1 # count of repetitions of fsstress (while soaking)
68 export EMAIL=root@localhost # where auto-qa will send its status messages
69 export HOST_OPTIONS=${HOST_OPTIONS:=local.config}
70 export CHECK_OPTIONS=${CHECK_OPTIONS:="-g auto"}
71 export BENCH_PASSES=${BENCH_PASSES:=5}
72 export XFS_MKFS_OPTIONS=${XFS_MKFS_OPTIONS:=-bsize=4096}
73 export TIME_FACTOR=${TIME_FACTOR:=1}
74 export LOAD_FACTOR=${LOAD_FACTOR:=1}
75 export DEBUGFS_MNT=${DEBUGFS_MNT:="/sys/kernel/debug"}
77 # some constants for overlayfs setup
78 export OVL_UPPER="ovl-upper"
79 export OVL_LOWER="ovl-lower"
80 export OVL_WORK="ovl-work"
81 # overlay mount point parent must be the base fs root
82 export OVL_MNT="ovl-mnt"
85 #export DEBUG=${DEBUG:=...} # arbitrary CFLAGS really.
86 export MALLOCLIB=${MALLOCLIB:=/usr/lib/libefence.a}
87 export LOCAL_CONFIGURE_OPTIONS=${LOCAL_CONFIGURE_OPTIONS:=--enable-readline=yes}
89 export RECREATE_TEST_DEV=false
91 # $1 = prog to look for
97 # Handle mkfs.btrfs which does (or does not) require -f to overwrite
98 set_btrfs_mkfs_prog_path_with_opts()
100 p=`set_prog_path mkfs.btrfs`
101 if [ "$p" != "" ] && grep -q 'force overwrite' $p; then
115 export MKFS_PROG="`set_prog_path mkfs`"
116 [ "$MKFS_PROG" = "" ] && _fatal "mkfs not found"
118 export MOUNT_PROG="`set_prog_path mount`"
119 [ "$MOUNT_PROG" = "" ] && _fatal "mount not found"
121 export UMOUNT_PROG="`set_prog_path umount`"
122 [ "$UMOUNT_PROG" = "" ] && _fatal "umount not found"
124 export FSSTRESS_PROG="./ltp/fsstress"
125 [ ! -x $FSSTRESS_PROG ] && _fatal "fsstress not found or executable"
127 export PERL_PROG="`set_prog_path perl`"
128 [ "$PERL_PROG" = "" ] && _fatal "perl not found"
130 export AWK_PROG="`set_prog_path awk`"
131 [ "$AWK_PROG" = "" ] && _fatal "awk not found"
133 export SED_PROG="`set_prog_path sed`"
134 [ "$SED_PROG" = "" ] && _fatal "sed not found"
136 export BC_PROG="`set_prog_path bc`"
137 [ "$BC_PROG" = "" ] && _fatal "bc not found"
139 export PS_ALL_FLAGS="-ef"
141 export DF_PROG="`set_prog_path df`"
142 [ "$DF_PROG" = "" ] && _fatal "df not found"
143 [ "$HOSTOS" = "Linux" ] && export DF_PROG="$DF_PROG -T -P"
145 export XFS_IO_PROG="`set_prog_path xfs_io`"
146 [ "$XFS_IO_PROG" = "" ] && _fatal "xfs_io not found"
148 export XFS_LOGPRINT_PROG="`set_prog_path xfs_logprint`"
149 export XFS_REPAIR_PROG="`set_prog_path xfs_repair`"
150 export XFS_DB_PROG="`set_prog_path xfs_db`"
151 export XFS_GROWFS_PROG=`set_prog_path xfs_growfs`
152 export XFS_SCRUB_PROG="`set_prog_path xfs_scrub`"
153 export XFS_PARALLEL_REPAIR_PROG="`set_prog_path xfs_prepair`"
154 export XFS_PARALLEL_REPAIR64_PROG="`set_prog_path xfs_prepair64`"
155 export __XFSDUMP_PROG="`set_prog_path xfsdump`"
156 if [ -n "$__XFSDUMP_PROG" ]; then
157 export XFSDUMP_PROG="$__XFSDUMP_PROG -e"
159 export XFSDUMP_PROG=""
161 export XFSRESTORE_PROG="`set_prog_path xfsrestore`"
162 export XFSINVUTIL_PROG="`set_prog_path xfsinvutil`"
163 export GETFATTR_PROG="`set_prog_path getfattr`"
164 export SETFATTR_PROG="`set_prog_path setfattr`"
165 export CHACL_PROG="`set_prog_path chacl`"
166 export ATTR_PROG="`set_prog_path attr`"
167 export QUOTA_PROG="`set_prog_path quota`"
168 export XFS_QUOTA_PROG="`set_prog_path xfs_quota`"
169 export KILLALL_PROG="`set_prog_path killall`"
170 export INDENT_PROG="`set_prog_path indent`"
171 export XFS_COPY_PROG="`set_prog_path xfs_copy`"
172 export FSTRIM_PROG="`set_prog_path fstrim`"
173 export DUMPE2FS_PROG="`set_prog_path dumpe2fs`"
174 export FIO_PROG="`set_prog_path fio`"
175 export FILEFRAG_PROG="`set_prog_path filefrag`"
176 export E4DEFRAG_PROG="`set_prog_path e4defrag`"
177 export LOGGER_PROG="`set_prog_path logger`"
178 export DBENCH_PROG="`set_prog_path dbench`"
179 export DMSETUP_PROG="`set_prog_path dmsetup`"
180 export WIPEFS_PROG="`set_prog_path wipefs`"
181 export DUMP_PROG="`set_prog_path dump`"
182 export RESTORE_PROG="`set_prog_path restore`"
183 export LVM_PROG="`set_prog_path lvm`"
184 export CHATTR_PROG="`set_prog_path chattr`"
185 export DEBUGFS_PROG="`set_prog_path debugfs`"
186 export UUIDGEN_PROG="`set_prog_path uuidgen`"
187 export GETRICHACL_PROG="`set_prog_path getrichacl`"
188 export SETRICHACL_PROG="`set_prog_path setrichacl`"
189 export KEYCTL_PROG="`set_prog_path keyctl`"
190 export XZ_PROG="`set_prog_path xz`"
191 export FLOCK_PROG="`set_prog_path flock`"
192 export LDD_PROG="`set_prog_path ldd`"
193 export TIMEOUT_PROG="`set_prog_path timeout`"
194 export MAN_PROG="`set_prog_path man`"
195 export NFS4_SETFACL_PROG="`set_prog_path nfs4_setfacl`"
196 export NFS4_GETFACL_PROG="`set_prog_path nfs4_getfacl`"
197 export UBIUPDATEVOL_PROG="`set_prog_path ubiupdatevol`"
199 # use 'udevadm settle' or 'udevsettle' to wait for lv to be settled.
200 # newer systems have udevadm command but older systems like RHEL5 don't.
201 # But if neither one is available, just set it to "sleep 1" to wait for lv to
203 UDEV_SETTLE_PROG="`set_prog_path udevadm`"
204 if [ "$UDEV_SETTLE_PROG" == "" ]; then
205 # try udevsettle command
206 UDEV_SETTLE_PROG="`set_prog_path udevsettle`"
208 # udevadm is available, add 'settle' as subcommand
209 UDEV_SETTLE_PROG="$UDEV_SETTLE_PROG settle"
211 # neither command is available, use sleep 1
212 if [ "$UDEV_SETTLE_PROG" == "" ]; then
213 UDEV_SETTLE_PROG="sleep 1"
215 export UDEV_SETTLE_PROG
219 export MKFS_XFS_PROG="`set_prog_path mkfs.xfs`"
220 export MKFS_EXT4_PROG="`set_prog_path mkfs.ext4`"
221 export MKFS_UDF_PROG="`set_prog_path mkudffs`"
222 export MKFS_BTRFS_PROG="`set_btrfs_mkfs_prog_path_with_opts`"
223 export MKFS_F2FS_PROG="`set_prog_path mkfs.f2fs`"
224 export DUMP_F2FS_PROG="`set_prog_path dump.f2fs`"
225 export BTRFS_UTIL_PROG="`set_prog_path btrfs`"
226 export BTRFS_SHOW_SUPER_PROG="`set_prog_path btrfs-show-super`"
227 export BTRFS_CONVERT_PROG="`set_prog_path btrfs-convert`"
228 export XFS_FSR_PROG="`set_prog_path xfs_fsr`"
229 export MKFS_NFS_PROG="false"
230 export MKFS_CIFS_PROG="false"
231 export MKFS_OVERLAY_PROG="false"
232 export MKFS_REISER4_PROG="`set_prog_path mkfs.reiser4`"
233 export E2FSCK_PROG="`set_prog_path e2fsck`"
234 export TUNE2FS_PROG="`set_prog_path tune2fs`"
238 # SELinux adds extra xattrs which can mess up our expected output.
239 # So, mount with a context, and they won't be created.
241 # Since the context= option only accepts contexts defined in the SELinux
242 # policy, and different systems may have different policies with
243 # different context names, use the context of an existing directory.
244 # Assume that any valid context is fine, since xfstests should really
245 # only be run from an "unconfined" process, or with SELinux in permissive
246 # mode. But if not, just specify your own SELINUX_MOUNT_OPTIONS.
247 if [ -x /usr/sbin/selinuxenabled ] && /usr/sbin/selinuxenabled; then
248 : ${SELINUX_MOUNT_OPTIONS:="-o context=$(stat -c %C /)"}
249 export SELINUX_MOUNT_OPTIONS
252 # check if mkfs.xfs supports v5 xfs
253 XFS_MKFS_HAS_NO_META_SUPPORT=""
254 touch /tmp/crc_check.img
255 $MKFS_XFS_PROG -N -d file,name=/tmp/crc_check.img,size=32m -m crc=0 \
257 if [ $? -ne 0 ]; then
258 XFS_MKFS_HAS_NO_META_SUPPORT=true
260 rm -f /tmp/crc_check.img
261 export XFS_MKFS_HAS_NO_META_SUPPORT
263 # new doesn't need config file parsed, we can stop here
264 if [ "$iam" == "new" ]; then
272 export MOUNT_OPTIONS=$XFS_MOUNT_OPTIONS
275 export MOUNT_OPTIONS=$UDF_MOUNT_OPTIONS
278 export MOUNT_OPTIONS=$NFS_MOUNT_OPTIONS
281 export MOUNT_OPTIONS=$CIFS_MOUNT_OPTIONS
284 export MOUNT_OPTIONS=$CEPHFS_MOUNT_OPTIONS
287 export MOUNT_OPTIONS=$GLUSTERFS_MOUNT_OPTIONS
290 export MOUNT_OPTIONS=$OVERLAY_MOUNT_OPTIONS
292 ext2|ext3|ext4|ext4dev)
293 # acls & xattrs aren't turned on by default on ext$FOO
294 export MOUNT_OPTIONS="-o acl,user_xattr $EXT_MOUNT_OPTIONS"
297 export MOUNT_OPTIONS="-o acl,user_xattr $F2FS_MOUNT_OPTIONS"
300 # acls & xattrs aren't turned on by default on reiserfs
301 export MOUNT_OPTIONS="-o acl,user_xattr $REISERFS_MOUNT_OPTIONS"
304 # acls & xattrs aren't supported by reiser4
305 export MOUNT_OPTIONS=$REISER4_MOUNT_OPTIONS
308 # acls aren't turned on by default on gfs2
309 export MOUNT_OPTIONS="-o acl $GFS2_MOUNT_OPTIONS"
312 # We need to specify the size at mount, use 1G by default
313 export MOUNT_OPTIONS="-o size=1G $TMPFS_MOUNT_OPTIONS"
316 export MOUNT_OPTIONS=$UBIFS_MOUNT_OPTIONS
327 export TEST_FS_MOUNT_OPTS=$CIFS_MOUNT_OPTIONS
330 export TEST_FS_MOUNT_OPTS=$CEPHFS_MOUNT_OPTIONS
333 export TEST_FS_MOUNT_OPTS=$NFS_MOUNT_OPTIONS
336 export TEST_FS_MOUNT_OPTS=$GLUSTERFS_MOUNT_OPTIONS
338 ext2|ext3|ext4|ext4dev)
339 # acls & xattrs aren't turned on by default on older ext$FOO
340 export TEST_FS_MOUNT_OPTS="-o acl,user_xattr $EXT_MOUNT_OPTIONS"
351 export MKFS_OPTIONS=$XFS_MKFS_OPTIONS
354 [ ! -z "$udf_fsize" ] && \
355 UDF_MKFS_OPTIONS="$UDF_MKFS_OPTIONS -s $udf_fsize"
356 export MKFS_OPTIONS=$UDF_MKFS_OPTIONS
359 export MKFS_OPTIONS=$NFS_MKFS_OPTIONS
362 export MKFS_OPTIONS=$CIFS_MKFS_OPTIONS
365 export MKFS_OPTIONS=$CEPHFS_MKFS_OPTIONS
368 export MKFS_OPTIONS="$REISERFS_MKFS_OPTIONS -q"
371 export MKFS_OPTIONS=$REISER4_MKFS_OPTIONS
374 export MKFS_OPTIONS="$GFS2_MKFS_OPTIONS -O -p lock_nolock"
377 export MKFS_OPTIONS="$JFS_MKFS_OPTIONS -q"
380 export MKFS_OPTIONS="$F2FS_MKFS_OPTIONS"
390 ext2|ext3|ext4|ext4dev)
391 export FSCK_OPTIONS="-nf"
394 export FSCK_OPTIONS="--yes"
397 export FSCK_OPTIONS=""
400 export FSCK_OPTIONS="-n"
407 [ "$HOST_CONFIG_DIR" ] || HOST_CONFIG_DIR=`pwd`/configs
409 [ -f /etc/xfsqa.config ] && export HOST_OPTIONS=/etc/xfsqa.config
410 [ -f $HOST_CONFIG_DIR/$HOST ] && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST
411 [ -f $HOST_CONFIG_DIR/$HOST.config ] && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST.config
414 # Returns a list of sections in config file
415 # Each section starts with the section name in the format
416 # [section_name1]. Only alphanumeric characters and '_' is allowed
417 # in the section name otherwise the section will not be resognised.
418 # Section name must be contained between square brackets.
419 get_config_sections() {
420 sed -n -e "s/^\[\([[:alnum:]_]*\)\]/\1/p" < $1
423 if [ ! -f "$HOST_OPTIONS" ]; then
427 export HOST_OPTIONS_SECTIONS="-no-sections-"
428 export OPTIONS_HAVE_SECTIONS=false
429 if [ -f "$HOST_OPTIONS" ]; then
430 export HOST_OPTIONS_SECTIONS=`get_config_sections $HOST_OPTIONS`
431 if [ -z "$HOST_OPTIONS_SECTIONS" ]; then
433 export HOST_OPTIONS_SECTIONS="-no-sections-"
435 export OPTIONS_HAVE_SECTIONS=true
445 if [ -z "$dev" ]; then
446 if [ "$dev_needed" == "required" ]; then
447 _fatal "common/config: $name is required but not defined!"
452 if [ -b "$dev" ] || ( echo $dev | grep -qE ":|//" ); then
453 # block device or a network url
459 if [ ! -d "$dev" ]; then
460 _fatal "common/config: $name ($dev) is not a directory for overlay"
464 if [ ! -c "$dev" ]; then
465 _fatal "common/config: $name ($dev) is not a character device"
469 _fatal "common/config: $name ($dev) is not a block device or a network filesystem"
473 # check and return a canonical mount point path
474 _canonicalize_mountpoint()
479 if [ -d "$dir" ]; then
480 # this follows symlinks and removes all trailing "/"s
485 if [ "$FSTYP" != "overlay" ] || [[ "$name" == OVL_BASE_* ]]; then
486 _fatal "common/config: $name ($dir) is not a directory"
489 # base fs may not be mounted yet, so just check that parent dir
490 # exists (where base fs will be mounted) because we are going to
491 # mkdir the overlay mount point dir anyway
492 local base=`basename $dir`
493 local parent=`dirname $dir`
494 parent=`_canonicalize_mountpoint OVL_BASE_$name "$parent"`
496 # prepend the overlay mount point to canonical parent path
500 # On check -overlay, for the non multi section config case, this
501 # function is called on every test, before init_rc().
502 # When SCRATCH/TEST_* vars are defined in config file, config file
503 # is sourced on every test and this function overrides the vars
505 # When SCRATCH/TEST_* vars are defined in evironment and not
506 # in config file, this function is called after vars have already
507 # been overriden in the previous test.
508 # In that case, TEST_DEV is a directory and not a blockdev and
509 # the function will return without overriding the SCRATCH/TEST_* vars.
510 _overlay_config_override()
512 # There are 2 options for configuring overlayfs tests:
514 # 1. (legacy) SCRATCH/TEST_DEV point to existing directories
515 # on an already mounted fs. In this case, the new
516 # OVL_BASE_SCRATCH/TEST_* vars are set to use the legacy
517 # vars values (even though they may not be mount points).
519 [ ! -d "$TEST_DEV" ] || export OVL_BASE_TEST_DIR="$TEST_DEV"
520 [ ! -d "$SCRATCH_DEV" ] || export OVL_BASE_SCRATCH_MNT="$SCRATCH_DEV"
522 # 2. SCRATCH/TEST_DEV point to the base fs partitions. In this case,
523 # the new OVL_BASE_SCRATCH/TEST_DEV/MNT vars are set to the values
524 # of the configured base fs and SCRATCH/TEST_DEV vars are set to the
525 # overlayfs base and mount dirs inside base fs mount.
526 [ -b "$TEST_DEV" ] || return 0
528 # Config file may specify base fs type, but we obay -overlay flag
529 export OVL_BASE_FSTYP="$FSTYP"
532 # Store original base fs vars
533 export OVL_BASE_TEST_DEV="$TEST_DEV"
534 export OVL_BASE_TEST_DIR="$TEST_DIR"
535 # If config does not set MOUNT_OPTIONS, its value may be
536 # leftover from previous _overlay_config_override, so
537 # don't use that value for base fs mount
538 [ "$MOUNT_OPTIONS" != "$OVERLAY_MOUNT_OPTIONS" ] || unset MOUNT_OPTIONS
539 export OVL_BASE_MOUNT_OPTIONS="$MOUNT_OPTIONS"
541 # Set TEST vars to overlay base and mount dirs inside base fs
542 export TEST_DEV="$OVL_BASE_TEST_DIR"
543 export TEST_DIR="$OVL_BASE_TEST_DIR/$OVL_MNT"
544 export MOUNT_OPTIONS="$OVERLAY_MOUNT_OPTIONS"
546 [ -b "$SCRATCH_DEV" ] || return 0
548 # Store original base fs vars
549 export OVL_BASE_SCRATCH_DEV="$SCRATCH_DEV"
550 export OVL_BASE_SCRATCH_MNT="$SCRATCH_MNT"
552 # Set SCRATCH vars to overlay base and mount dirs inside base fs
553 export SCRATCH_DEV="$OVL_BASE_SCRATCH_MNT"
554 export SCRATCH_MNT="$OVL_BASE_SCRATCH_MNT/$OVL_MNT"
557 _overlay_config_restore()
560 [ -z "$OVL_BASE_FSTYP" ] || export FSTYP=$OVL_BASE_FSTYP
561 [ -z "$OVL_BASE_TEST_DEV" ] || export TEST_DEV=$OVL_BASE_TEST_DEV
562 [ -z "$OVL_BASE_TEST_DIR" ] || export TEST_DIR=$OVL_BASE_TEST_DIR
563 [ -z "$OVL_BASE_SCRATCH_DEV" ] || export SCRATCH_DEV=$OVL_BASE_SCRATCH_DEV
564 [ -z "$OVL_BASE_SCRATCH_MNT" ] || export SCRATCH_MNT=$OVL_BASE_SCRATCH_MNT
565 [ -z "$OVL_BASE_MOUNT_OPTIONS" ] || export MOUNT_OPTIONS=$OVL_BASE_MOUNT_OPTIONS
568 # Parse config section options. This function will parse all the configuration
569 # within a single section which name is passed as an argument. For section
570 # name format see comments in get_config_sections().
571 # Empty lines and everything after '#' will be ignored.
572 # Configuration options should be defined in the format
574 # CONFIG_OPTION=value
576 # This 'CONFIG_OPTION' variable and will be exported as an environment variable.
577 parse_config_section() {
579 if ! $OPTIONS_HAVE_SECTIONS; then
582 eval `sed -e 's/[[:space:]]*\=[[:space:]]*/=/g' \
584 -e 's/[[:space:]]*$//' \
585 -e 's/^[[:space:]]*//' \
586 -e "s/^\([^=]*\)=\"\?'\?\([^\"']*\)\"\?'\?$/export \1=\"\2\"/" \
588 | sed -n -e "/^\[$SECTION\]/,/^\s*\[/{/^[^#].*\=.*/p;}"`
592 if [ ! -z "$CONFIG_INCLUDED" ] && ! $OPTIONS_HAVE_SECTIONS; then
596 # We might have overriden FSTYP and TEST/SCRATCH vars with overlay values
597 # in the previous section, so restore them to original values stored in
599 # We need to do this *before* old FSTYP and MOUNT_OPTIONS are recorded
600 # and *before* SCRATCH_DEV and MOUNT_OPTIONS are unset
601 if [ "$FSTYP" == "overlay" ]; then
602 _overlay_config_restore
605 local OLD_FSTYP=$FSTYP
606 local OLD_MOUNT_OPTIONS=$MOUNT_OPTIONS
607 local OLD_TEST_FS_MOUNT_OPTS=$TEST_FS_MOUNT_OPTS
608 local OLD_MKFS_OPTIONS=$MKFS_OPTIONS
609 local OLD_FSCK_OPTIONS=$FSCK_OPTIONS
610 local OLD_USE_EXTERNAL=$USE_EXTERNAL
613 unset TEST_FS_MOUNT_OPTS
618 # We might have deduced SCRATCH_DEV from the SCRATCH_DEV_POOL in the previous
619 # run, so we have to unset it now.
620 if [ "$SCRATCH_DEV_NOT_SET" == "true" ]; then
624 parse_config_section $1
626 if [ ! -z "$OLD_FSTYP" ] && [ $OLD_FSTYP != $FSTYP ]; then
627 [ -z "$MOUNT_OPTIONS" ] && _mount_opts
628 [ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
629 [ -z "$MKFS_OPTIONS" ] && _mkfs_opts
630 [ -z "$FSCK_OPTIONS" ] && _fsck_opts
632 # clear the external devices if we are not using them
633 if [ -z "$USE_EXTERNAL" ]; then
640 [ -z "$MOUNT_OPTIONS" ] && export MOUNT_OPTIONS=$OLD_MOUNT_OPTIONS
641 [ -z "$TEST_FS_MOUNT_OPTS" ] && export TEST_FS_MOUNT_OPTS=$OLD_TEST_FS_MOUNT_OPTS
642 [ -z "$MKFS_OPTIONS" ] && export MKFS_OPTIONS=$OLD_MKFS_OPTIONS
643 [ -z "$FSCK_OPTIONS" ] && export FSCK_OPTIONS=$OLD_FSCK_OPTIONS
644 [ -z "$USE_EXTERNAL" ] && export USE_EXTERNAL=$OLD_USE_EXTERNAL
647 # set default RESULT_BASE
648 if [ -z "$RESULT_BASE" ]; then
649 export RESULT_BASE="$here/results/"
652 # Mandatory Config values.
654 [ -z "$EMAIL" ] && MC="$MC EMAIL"
655 [ -z "$TEST_DIR" ] && MC="$MC TEST_DIR"
656 [ -z "$TEST_DEV" ] && MC="$MC TEST_DEV"
658 if [ -n "$MC" ]; then
659 echo "Warning: need to define parameters for host $HOST"
660 echo " or set variables:"
665 _check_device TEST_DEV required $TEST_DEV
666 export TEST_DIR=`_canonicalize_mountpoint TEST_DIR $TEST_DIR`
668 # a btrfs tester will set only SCRATCH_DEV_POOL, we will put first of its dev
669 # to SCRATCH_DEV and rest to SCRATCH_DEV_POOL to maintain the backward compatibility
670 if [ ! -z "$SCRATCH_DEV_POOL" ]; then
671 if [ ! -z "$SCRATCH_DEV" ]; then
672 echo "common/config: Error: \$SCRATCH_DEV ($SCRATCH_DEV) should be unset when \$SCRATCH_DEV_POOL ($SCRATCH_DEV_POOL) is set"
675 SCRATCH_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'`
677 export SCRATCH_DEV_NOT_SET=true
680 _check_device SCRATCH_DEV optional $SCRATCH_DEV
681 export SCRATCH_MNT=`_canonicalize_mountpoint SCRATCH_MNT $SCRATCH_MNT`
683 if [ -n "$USE_EXTERNAL" ]; then
684 _check_device TEST_RTDEV optional $TEST_RTDEV
685 _check_device TEST_LOGDEV optional $TEST_LOGDEV
686 _check_device SCRATCH_RTDEV optional $SCRATCH_RTDEV
687 _check_device SCRATCH_LOGDEV optional $SCRATCH_LOGDEV
690 # Override FSTYP from config when running ./check -overlay
691 # and maybe override base fs TEST/SCRATCH_DEV with overlay base dirs.
692 # We need to do this *after* default mount options are set by base FSTYP
693 # and *after* SCRATCH_DEV is deduced from SCRATCH_DEV_POOL
694 if [ "$OVERLAY" == "true" -o "$FSTYP" == "overlay" ]; then
695 _overlay_config_override
699 if [ -z "$CONFIG_INCLUDED" ]; then
700 get_next_config `echo $HOST_OPTIONS_SECTIONS | cut -f1 -d" "`
701 export CONFIG_INCLUDED=true
703 # Autodetect fs type based on what's on $TEST_DEV unless it's been set
705 if [ -z "$FSTYP" ] && \
706 [ "$HOSTOS" == "Linux" -o "$OSTYPE" == "linux-gnu" ] && \
707 [ ! -z "$TEST_DEV" ]; then
708 FSTYP=`blkid -c /dev/null -s TYPE -o value $TEST_DEV`
712 [ -z "$MOUNT_OPTIONS" ] && _mount_opts
713 [ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
714 [ -z "$MKFS_OPTIONS" ] && _mkfs_opts
715 [ -z "$FSCK_OPTIONS" ] && _fsck_opts
717 # We get here for the non multi section case, on every test that sources
718 # common/rc after re-sourcing the HOST_OPTIONS config file.
719 # Because of this re-sourcing, we need to re-canonicalize the configured
720 # mount points and re-override TEST/SCRATCH_DEV overlay vars.
722 # canonicalize the mount points
723 # this follows symlinks and removes all trailing "/"s
724 export TEST_DIR=`_canonicalize_mountpoint TEST_DIR $TEST_DIR`
725 export SCRATCH_MNT=`_canonicalize_mountpoint SCRATCH_MNT $SCRATCH_MNT`
727 # Override FSTYP from config when running ./check -overlay
728 # and maybe override base fs TEST/SCRATCH_DEV with overlay base dirs
729 if [ "$OVERLAY" == "true" -o "$FSTYP" == "overlay" ]; then
730 _overlay_config_override
734 # make sure this script returns success