common/config

   1 ##/bin/bash
   2 #
   3 # Copyright (c) 2000-2003,2006 Silicon Graphics, Inc.  All Rights Reserved.
   4 #
   5 # This program is free software; you can redistribute it and/or
   6 # modify it under the terms of the GNU General Public License as
   7 # published by the Free Software Foundation.
   8 #
   9 # This program is distributed in the hope that it would be useful,
  10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12 # GNU General Public License for more details.
  13 #
  14 # You should have received a copy of the GNU General Public License
  15 # along with this program; if not, write the Free Software Foundation,
  16 # Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  17 #
  18 #
  19 # setup and check for config parameters, and in particular
  20 #
  21 # EMAIL -           email of the script runner.
  22 # TEST_DIR -        scratch test directory that is in an already
  23 #                   mounted XFS file system, needs to be be world
  24 #                   writeable
  25 # TEST_DEV -        device for file system containing TEST_DIR
  26 #
  27 # and optionally:
  28 # SCRATCH_DEV -     device you can make a scratch file system on
  29 # SCRATCH_MNT -     mount point for scratch file system
  30 # SCRATCH_LOGDEV -  scratch log device for external log testing
  31 # SCRATCH_RTDEV -   scratch rt dev
  32 # TEST_LOGDEV -     test log device for external log testing
  33 # TEST_RTDEV -      test rt dev
  34 # TAPE_DEV -        the tape device for the xfsdump tests
  35 # RMT_TAPE_DEV -    the remote tape device for the xfsdump tests
  36 # RMT_IRIXTAPE_DEV- the IRIX remote tape device for the xfsdump tests
  37 # RMT_TAPE_USER -   remote user for tape device
  38 #
  39 # - These can be added to $HOST_CONFIG_DIR (witch default to ./config)
  40 #   below or a separate local configuration file can be used (using
  41 #   the HOST_OPTIONS variable).
  42 # - This script is shared by the stress test system and the auto-qa
  43 #   system
  44 # - TEST_DEV & TEST_DIR must be assigned.
  45 # - this script shouldn't make any assertions about filesystem
  46 #   validity or mountedness.
  47 #
  48
  49 # all tests should use a common language setting to prevent golden
  50 # output mismatches.
  51 export LANG=C
  52 export LC_ALL=C
  53
  54 # Warning: don't put freeware before /usr/bsd on IRIX coz you'll
  55 #  get the wrong hostname and set your system name to -s  :)
  56 [ -d /usr/bsd ] && PATH=$PATH:/usr/bsd
  57 [ -d /usr/freeware/bin ] && PATH=$PATH:/usr/freeware/bin
  58 PATH=".:$PATH"
  59
  60 export HOST=`hostname -s`
  61 export HOSTOS=`uname -s`
  62 [ "$HOSTOS" = "IRIX64" ] && export HOSTOS="IRIX"
  63
  64 export MODULAR=0               # using XFS as a module or not
  65 export BOOT="/boot"            # install target for kernels
  66 export EXTRA=${EXTRA:=xfs-qa}
  67
  68 # general parameters (mainly for auto-qa)
  69 export SOAK_PROC=3             # -p option to fsstress
  70 export SOAK_STRESS=10000       # -n option to fsstress
  71 export SOAK_PASSES=-1          # count of repetitions of fsstress (while soaking)
  72 export EMAIL=root@localhost    # where auto-qa will send its status messages
  73 export HOST_OPTIONS=${HOST_OPTIONS:=local.config}
  74 export CHECK_OPTIONS=${CHECK_OPTIONS:="-g auto"}
  75 export BENCH_PASSES=${BENCH_PASSES:=5}
  76 export XFS_MKFS_OPTIONS=${XFS_MKFS_OPTIONS:=-bsize=4096}
  77 export TIME_FACTOR=${TIME_FACTOR:=1}
  78 export LOAD_FACTOR=${LOAD_FACTOR:=1}
  79 export DEBUGFS_MNT=${DEBUGFS_MNT:="/sys/kernel/debug"}
  80 export OVERLAY_UPPER_DIR=${OVERLAY_UPPER_DIR:="upper"}
  81 export OVERLAY_LOWER_DIR=${OVERLAY_LOWER_DIR:="lower"}
  82 export OVERLAY_WORK_DIR=${OVERLAY_WORK_DIR:="work"}
  83
  84 export PWD=`pwd`
  85 #export DEBUG=${DEBUG:=...} # arbitrary CFLAGS really.
  86 export MALLOCLIB=${MALLOCLIB:=/usr/lib/libefence.a}
  87 export LOCAL_CONFIGURE_OPTIONS=${LOCAL_CONFIGURE_OPTIONS:=--enable-readline=yes}
  88
  89 export RECREATE_TEST_DEV=false
  90
  91 # $1 = prog to look for, $2* = default pathnames if not found in $PATH
  92 set_prog_path()
  93 {
  94     p=`which $1 2> /dev/null`
  95     if [ -n "$p" -a -x "$p" ]; then
  96         echo $p
  97         return 0
  98     fi
  99     p=$1
 100
 101     shift
 102     for f; do
 103         if [ -x $f ]; then
 104             echo $f
 105             return 0
 106         fi
 107     done
 108
 109     echo ""
 110     return 1
 111 }
 112
 113 # Handle mkfs.btrfs which does (or does not) require -f to overwrite
 114 set_btrfs_mkfs_prog_path_with_opts()
 115 {
 116         p=`set_prog_path mkfs.btrfs`
 117         if [ "$p" != "" ] && grep -q 'force overwrite' $p; then
 118                 echo "$p -f"
 119         else
 120                 echo $p
 121         fi
 122 }
 123
 124 _fatal()
 125 {
 126     echo "$*"
 127     status=1
 128     exit 1
 129 }
 130
 131 export MKFS_PROG="`set_prog_path mkfs`"
 132 [ "$MKFS_PROG" = "" ] && _fatal "mkfs not found"
 133
 134 export MOUNT_PROG="`set_prog_path mount`"
 135 [ "$MOUNT_PROG" = "" ] && _fatal "mount not found"
 136
 137 export UMOUNT_PROG="`set_prog_path umount`"
 138 [ "$UMOUNT_PROG" = "" ] && _fatal "umount not found"
 139
 140 export FSSTRESS_PROG="./ltp/fsstress"
 141 [ ! -x $FSSTRESS_PROG ] && _fatal "fsstress not found or executable"
 142
 143 export PERL_PROG="`set_prog_path perl`"
 144 [ "$PERL_PROG" = "" ] && _fatal "perl not found"
 145
 146 export AWK_PROG="`set_prog_path awk`"
 147 [ "$AWK_PROG" = "" ] && _fatal "awk not found"
 148
 149 export SED_PROG="`set_prog_path sed`"
 150 [ "$SED_PROG" = "" ] && _fatal "sed not found"
 151
 152 export BC_PROG="`set_prog_path bc`"
 153 [ "$BC_PROG" = "" ] && _fatal "bc not found"
 154
 155 export PS_ALL_FLAGS="-ef"
 156
 157 export DF_PROG="`set_prog_path df`"
 158 [ "$DF_PROG" = "" ] && _fatal "df not found"
 159 [ "$HOSTOS" = "Linux" ] && export DF_PROG="$DF_PROG -T -P"
 160
 161 export XFS_IO_PROG="`set_prog_path xfs_io`"
 162 [ "$XFS_IO_PROG" = "" ] && _fatal "xfs_io not found"
 163
 164 export XFS_LOGPRINT_PROG="`set_prog_path xfs_logprint`"
 165 export XFS_REPAIR_PROG="`set_prog_path xfs_repair`"
 166 export XFS_DB_PROG="`set_prog_path xfs_db`"
 167 export XFS_GROWFS_PROG=`set_prog_path xfs_growfs`
 168 export XFS_SCRUB_PROG="`set_prog_path xfs_scrub`"
 169 export XFS_PARALLEL_REPAIR_PROG="`set_prog_path xfs_prepair`"
 170 export XFS_PARALLEL_REPAIR64_PROG="`set_prog_path xfs_prepair64`"
 171 export __XFSDUMP_PROG="`set_prog_path xfsdump`"
 172 if [ -n "$__XFSDUMP_PROG" ]; then
 173         export XFSDUMP_PROG="$__XFSDUMP_PROG -e"
 174 else
 175         export XFSDUMP_PROG=""
 176 fi
 177 export XFSRESTORE_PROG="`set_prog_path xfsrestore`"
 178 export XFSINVUTIL_PROG="`set_prog_path xfsinvutil`"
 179 export GETFATTR_PROG="`set_prog_path getfattr`"
 180 export SETFATTR_PROG="`set_prog_path setfattr`"
 181 export CHACL_PROG="`set_prog_path chacl`"
 182 export ATTR_PROG="`set_prog_path attr`"
 183 export QUOTA_PROG="`set_prog_path quota`"
 184 export XFS_QUOTA_PROG="`set_prog_path xfs_quota`"
 185 export KILLALL_PROG="`set_prog_path killall`"
 186 export INDENT_PROG="`set_prog_path indent`"
 187 export XFS_COPY_PROG="`set_prog_path xfs_copy`"
 188 export FSTRIM_PROG="`set_prog_path fstrim`"
 189 export DUMPE2FS_PROG="`set_prog_path dumpe2fs`"
 190 export FIO_PROG="`set_prog_path fio`"
 191 export FILEFRAG_PROG="`set_prog_path filefrag`"
 192 export E4DEFRAG_PROG="`set_prog_path e4defrag`"
 193 export LOGGER_PROG="`set_prog_path logger`"
 194 export DBENCH_PROG="`set_prog_path dbench`"
 195 export DMSETUP_PROG="`set_prog_path dmsetup`"
 196 export WIPEFS_PROG="`set_prog_path wipefs`"
 197 export DUMP_PROG="`set_prog_path dump`"
 198 export RESTORE_PROG="`set_prog_path restore`"
 199 export LVM_PROG="`set_prog_path lvm`"
 200 export CHATTR_PROG="`set_prog_path chattr`"
 201 export DEBUGFS_PROG="`set_prog_path debugfs`"
 202 export UUIDGEN_PROG="`set_prog_path uuidgen`"
 203 export GETRICHACL_PROG="`set_prog_path getrichacl`"
 204 export SETRICHACL_PROG="`set_prog_path setrichacl`"
 205
 206 # use 'udevadm settle' or 'udevsettle' to wait for lv to be settled.
 207 # newer systems have udevadm command but older systems like RHEL5 don't.
 208 # But if neither one is available, just set it to "sleep 1" to wait for lv to
 209 # be settled
 210 UDEV_SETTLE_PROG="`set_prog_path udevadm`"
 211 if [ "$UDEV_SETTLE_PROG" == "" ]; then
 212         # try udevsettle command
 213         UDEV_SETTLE_PROG="`set_prog_path udevsettle`"
 214 else
 215         # udevadm is available, add 'settle' as subcommand
 216         UDEV_SETTLE_PROG="$UDEV_SETTLE_PROG settle"
 217 fi
 218 # neither command is available, use sleep 1
 219 if [ "$UDEV_SETTLE_PROG" == "" ]; then
 220         UDEV_SETTLE_PROG="sleep 1"
 221 fi
 222 export UDEV_SETTLE_PROG
 223
 224 # Generate a comparable xfsprogs version number in the form of
 225 # major * 10000 + minor * 100 + release
 226 #
 227 # $ xfs_db -V
 228 # xfs_db version 2.9.7
 229 #
 230 # so, 2.9.7 = 20907
 231 _version=`$XFS_DB_PROG -V | $AWK_PROG '
 232         /version/ {
 233                 if (split($3,ver,".") == 3)
 234                         print (ver[1] * 10000) + (ver[2] * 100) + ver[3];
 235         }'`
 236 [ -z "$_version" ] && _fatal "xfsprogs version cannot be found"
 237 export XFSPROGS_VERSION="$_version"
 238
 239 case "$HOSTOS" in
 240     IRIX*)
 241         export MKFS_XFS_PROG="`set_prog_path mkfs_xfs`"
 242         export MKFS_UDF_PROG="`set_prog_path mkfs_udf`"
 243         export XFS_FSR_PROG="`set_prog_path /usr/etc/fsr_xfs`"
 244         export MKFS_NFS_PROG="false"
 245         export MKFS_CIFS_PROG="false"
 246         ;;
 247     Linux)
 248         export MKFS_XFS_PROG="`set_prog_path mkfs.xfs`"
 249         export MKFS_EXT4_PROG="`set_prog_path mkfs.ext4`"
 250         export MKFS_UDF_PROG="`set_prog_path mkudffs`"
 251         export MKFS_BTRFS_PROG="`set_btrfs_mkfs_prog_path_with_opts`"
 252         export MKFS_F2FS_PROG="`set_prog_path mkfs.f2fs`"
 253         export DUMP_F2FS_PROG="`set_prog_path dump.f2fs`"
 254         export BTRFS_UTIL_PROG="`set_prog_path btrfs`"
 255         export BTRFS_SHOW_SUPER_PROG="`set_prog_path btrfs-show-super`"
 256         export XFS_FSR_PROG="`set_prog_path xfs_fsr`"
 257         export MKFS_NFS_PROG="false"
 258         export MKFS_CIFS_PROG="false"
 259         export MKFS_OVERLAY_PROG="false"
 260         export MKFS_REISER4_PROG="`set_prog_path mkfs.reiser4`"
 261         ;;
 262 esac
 263
 264 # SELinux adds extra xattrs which can mess up our expected output.
 265 # So, mount with a context, and they won't be created
 266 # # nfs_t is a "liberal" context so we can use it.
 267 if [ -x /usr/sbin/selinuxenabled ] && /usr/sbin/selinuxenabled; then
 268         SELINUX_MOUNT_OPTIONS="-o context=system_u:object_r:nfs_t:s0"
 269         export SELINUX_MOUNT_OPTIONS
 270 fi
 271
 272 # check if mkfs.xfs supports v5 xfs
 273 XFS_MKFS_HAS_NO_META_SUPPORT=""
 274 touch /tmp/crc_check.img
 275 $MKFS_XFS_PROG -N -d file,name=/tmp/crc_check.img,size=32m -m crc=0 \
 276         >/dev/null 2>&1;
 277 if [ $? -ne 0 ]; then
 278         XFS_MKFS_HAS_NO_META_SUPPORT=true
 279 fi
 280 rm -f /tmp/crc_check.img
 281 export XFS_MKFS_HAS_NO_META_SUPPORT
 282
 283 # new doesn't need config file parsed, we can stop here
 284 if [ "$iam" == "new" ]; then
 285         return 0
 286 fi
 287
 288 _mount_opts()
 289 {
 290         case $FSTYP in
 291         xfs)
 292                 export MOUNT_OPTIONS=$XFS_MOUNT_OPTIONS
 293                 ;;
 294         udf)
 295                 export MOUNT_OPTIONS=$UDF_MOUNT_OPTIONS
 296                 ;;
 297         nfs)
 298                 export MOUNT_OPTIONS=$NFS_MOUNT_OPTIONS
 299                 ;;
 300         cifs)
 301                 export MOUNT_OPTIONS=$CIFS_MOUNT_OPTIONS
 302                 ;;
 303         ceph)
 304                 export MOUNT_OPTIONS=$CEPHFS_MOUNT_OPTIONS
 305                 ;;
 306         overlay)
 307                 export MOUNT_OPTIONS=$OVERLAY_MOUNT_OPTIONS
 308                 ;;
 309         ext2|ext3|ext4|ext4dev)
 310                 # acls & xattrs aren't turned on by default on ext$FOO
 311                 export MOUNT_OPTIONS="-o acl,user_xattr $EXT_MOUNT_OPTIONS"
 312                 ;;
 313         f2fs)
 314                 export MOUNT_OPTIONS="-o acl,user_xattr $F2FS_MOUNT_OPTIONS"
 315                 ;;
 316         reiserfs)
 317                 # acls & xattrs aren't turned on by default on reiserfs
 318                 export MOUNT_OPTIONS="-o acl,user_xattr $REISERFS_MOUNT_OPTIONS"
 319                 ;;
 320        reiser4)
 321                # acls & xattrs aren't supported by reiser4
 322                export MOUNT_OPTIONS=$REISER4_MOUNT_OPTIONS
 323                ;;
 324         gfs2)
 325                 # acls aren't turned on by default on gfs2
 326                 export MOUNT_OPTIONS="-o acl $GFS2_MOUNT_OPTIONS"
 327                 ;;
 328         tmpfs)
 329                 # We need to specify the size at mount, use 1G by default
 330                 export MOUNT_OPTIONS="-o size=1G $TMPFS_MOUNT_OPTIONS"
 331                 ;;
 332         *)
 333                 ;;
 334         esac
 335 }
 336
 337 _test_mount_opts()
 338 {
 339         case $FSTYP in
 340         cifs)
 341                 export TEST_FS_MOUNT_OPTS=$CIFS_MOUNT_OPTIONS
 342                 ;;
 343         ceph)
 344                 export TEST_FS_MOUNT_OPTS=$CEPHFS_MOUNT_OPTIONS
 345                 ;;
 346         *)
 347                 ;;
 348         esac
 349 }
 350
 351 _mkfs_opts()
 352 {
 353         case $FSTYP in
 354         xfs)
 355                 export MKFS_OPTIONS=$XFS_MKFS_OPTIONS
 356                 ;;
 357         udf)
 358                 [ ! -z "$udf_fsize" ] && \
 359                         UDF_MKFS_OPTIONS="$UDF_MKFS_OPTIONS -s $udf_fsize"
 360                 export MKFS_OPTIONS=$UDF_MKFS_OPTIONS
 361                 ;;
 362         nfs)
 363                 export MKFS_OPTIONS=$NFS_MKFS_OPTIONS
 364                 ;;
 365         cifs)
 366                 export MKFS_OPTIONS=$CIFS_MKFS_OPTIONS
 367                 ;;
 368         ceph)
 369                 export MKFS_OPTIONS=$CEPHFS_MKFS_OPTIONS
 370                 ;;
 371         reiserfs)
 372                 export MKFS_OPTIONS="$REISERFS_MKFS_OPTIONS -q"
 373                 ;;
 374        reiser4)
 375                 export MKFS_OPTIONS=$REISER4_MKFS_OPTIONS
 376                 ;;
 377         gfs2)
 378                 export MKFS_OPTIONS="$GFS2_MKFS_OPTIONS -O -p lock_nolock"
 379                 ;;
 380         jfs)
 381                 export MKFS_OPTIONS="$JFS_MKFS_OPTIONS -q"
 382                 ;;
 383         f2fs)
 384                 export MKFS_OPTIONS="$F2FS_MKFS_OPTIONS"
 385                 ;;
 386         *)
 387                 ;;
 388         esac
 389 }
 390
 391 _fsck_opts()
 392 {
 393         case $FSTYP in
 394         ext2|ext3|ext4|ext4dev)
 395                 export FSCK_OPTIONS="-nf"
 396                 ;;
 397         reiser*)
 398                 export FSCK_OPTIONS="--yes"
 399                 ;;
 400         f2fs)
 401                 export FSCK_OPTIONS=""
 402                 ;;
 403         *)
 404                 export FSCK_OPTIONS="-n"
 405                 ;;
 406         esac
 407 }
 408
 409 known_hosts()
 410 {
 411         [ "$HOST_CONFIG_DIR" ] || HOST_CONFIG_DIR=`pwd`/configs
 412
 413         [ -f /etc/xfsqa.config ]             && export HOST_OPTIONS=/etc/xfsqa.config
 414         [ -f $HOST_CONFIG_DIR/$HOST ]        && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST
 415         [ -f $HOST_CONFIG_DIR/$HOST.config ] && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST.config
 416 }
 417
 418 # Returns a list of sections in config file
 419 # Each section starts with the section name in the format
 420 # [section_name1]. Only alphanumeric characters and '_' is allowed
 421 # in the section name otherwise the section will not be resognised.
 422 # Section name must be contained between square brackets.
 423 get_config_sections() {
 424         sed -n -e "s/^\[\([[:alnum:]_]*\)\]/\1/p" < $1
 425 }
 426
 427 if [ ! -f "$HOST_OPTIONS" ]; then
 428         known_hosts
 429 fi
 430
 431 export HOST_OPTIONS_SECTIONS="-no-sections-"
 432 export OPTIONS_HAVE_SECTIONS=false
 433 if [ -f "$HOST_OPTIONS" ]; then
 434         export HOST_OPTIONS_SECTIONS=`get_config_sections $HOST_OPTIONS`
 435         if [ -z "$HOST_OPTIONS_SECTIONS" ]; then
 436                 . $HOST_OPTIONS
 437                 export HOST_OPTIONS_SECTIONS="-no-sections-"
 438         else
 439                 export OPTIONS_HAVE_SECTIONS=true
 440         fi
 441 fi
 442
 443 _check_device()
 444 {
 445         local name=$1
 446         local dev_needed=$2
 447         local dev=$3
 448
 449         if [ -z "$dev" ]; then
 450                 if [ "$dev_needed" == "required" ]; then
 451                         _fatal "common/config: $name is required but not defined!"
 452                 fi
 453                 return
 454         fi
 455
 456         echo $dev | grep -qE ":|//" > /dev/null 2>&1
 457         network_dev=$?
 458         if [ "$FSTYP" == "overlay" ]; then
 459                 if [ ! -d "$dev" ]; then
 460                         _fatal "common/config: $name ($dev) is not a directory for overlay"
 461                 fi
 462         elif [ ! -b "$dev" -a "$network_dev" != "0" ]; then
 463                 _fatal "common/config: $name ($dev) is not a block device or a network filesystem"
 464         fi
 465 }
 466
 467 # Parse config section options. This function will parse all the configuration
 468 # within a single section which name is passed as an argument. For section
 469 # name format see comments in get_config_sections().
 470 # Empty lines and everything after '#' will be ignored.
 471 # Configuration options should be defined in the format
 472 #
 473 # CONFIG_OPTION=value
 474 #
 475 # This 'CONFIG_OPTION' variable and will be exported as an environment variable.
 476 parse_config_section() {
 477         SECTION=$1
 478         if ! $OPTIONS_HAVE_SECTIONS; then
 479                 return 0
 480         fi
 481         eval `sed -e 's/[[:space:]]*\=[[:space:]]*/=/g' \
 482                 -e 's/#.*$//' \
 483                 -e 's/[[:space:]]*$//' \
 484                 -e 's/^[[:space:]]*//' \
 485                 -e "s/^\([^=]*\)=\"\?'\?\([^\"']*\)\"\?'\?$/export \1=\"\2\"/" \
 486                 < $HOST_OPTIONS \
 487                 | sed -n -e "/^\[$SECTION\]/,/^\s*\[/{/^[^#].*\=.*/p;}"`
 488 }
 489
 490 get_next_config() {
 491         if [ ! -z "$CONFIG_INCLUDED" ] && ! $OPTIONS_HAVE_SECTIONS; then
 492                 return 0
 493         fi
 494
 495         local OLD_FSTYP=$FSTYP
 496         local OLD_MOUNT_OPTIONS=$MOUNT_OPTIONS
 497         local OLD_TEST_FS_MOUNT_OPTS=$TEST_FS_MOUNT_OPTS
 498         local OLD_MKFS_OPTIONS=$MKFS_OPTIONS
 499         local OLD_FSCK_OPTIONS=$FSCK_OPTIONS
 500         local OLD_USE_EXTERNAL=$USE_EXTERNAL
 501
 502         unset MOUNT_OPTIONS
 503         unset MKFS_OPTIONS
 504         unset FSCK_OPTIONS
 505         unset USE_EXTERNAL
 506
 507         # We might have deduced SCRATCH_DEV from the SCRATCH_DEV_POOL in the previous
 508         # run, so we have to unset it now.
 509         if [ "$SCRATCH_DEV_NOT_SET" == "true" ]; then
 510                 unset SCRATCH_DEV
 511         fi
 512
 513         parse_config_section $1
 514
 515         if [ ! -z "$OLD_FSTYP" ] && [ $OLD_FSTYP != $FSTYP ]; then
 516                 [ -z "$MOUNT_OPTIONS" ] && _mount_opts
 517                 [ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
 518                 [ -z "$MKFS_OPTIONS" ] && _mkfs_opts
 519                 [ -z "$FSCK_OPTIONS" ] && _fsck_opts
 520
 521                 # clear the external devices if we are not using them
 522                 if [ -z "$USE_EXTERNAL" ]; then
 523                         unset TEST_RTDEV
 524                         unset TEST_LOGDEV
 525                         unset SCRATCH_RTDEV
 526                         unset SCRATCH_LOGDEV
 527                 fi
 528         else
 529                 [ -z "$MOUNT_OPTIONS" ] && export MOUNT_OPTIONS=$OLD_MOUNT_OPTIONS
 530                 [ -z "$TEST_FS_MOUNT_OPTS" ] && export TEST_FS_MOUNT_OPTS=$OLD_TEST_FS_MOUNT_OPTS
 531                 [ -z "$MKFS_OPTIONS" ] && export MKFS_OPTIONS=$OLD_MKFS_OPTIONS
 532                 [ -z "$FSCK_OPTIONS" ] && export FSCK_OPTIONS=$OLD_FSCK_OPTIONS
 533                 [ -z "$USE_EXTERNAL" ] && export USE_EXTERNAL=$OLD_USE_EXTERNAL
 534         fi
 535
 536         # set default RESULT_BASE
 537         if [ -z "$RESULT_BASE" ]; then
 538                 export RESULT_BASE="$here/results/"
 539         fi
 540
 541         #  Mandatory Config values.
 542         MC=""
 543         [ -z "$EMAIL" ]          && MC="$MC EMAIL"
 544         [ -z "$TEST_DIR" ]       && MC="$MC TEST_DIR"
 545         [ -z "$TEST_DEV" ]       && MC="$MC TEST_DEV"
 546
 547         if [ -n "$MC" ]; then
 548                 echo "Warning: need to define parameters for host $HOST"
 549                 echo "       or set variables:"
 550                 echo "       $MC"
 551                 exit 1
 552         fi
 553
 554         _check_device TEST_DEV required $TEST_DEV
 555         if [ ! -d "$TEST_DIR" ]; then
 556                 echo "common/config: Error: \$TEST_DIR ($TEST_DIR) is not a directory"
 557                 exit 1
 558         fi
 559
 560         # a btrfs tester will set only SCRATCH_DEV_POOL, we will put first of its dev
 561         # to SCRATCH_DEV and rest to SCRATCH_DEV_POOL to maintain the backward compatibility
 562         if [ ! -z "$SCRATCH_DEV_POOL" ]; then
 563                 if [ ! -z "$SCRATCH_DEV" ]; then
 564                         echo "common/config: Error: \$SCRATCH_DEV ($SCRATCH_DEV) should be unset when \$SCRATCH_DEV_POOL ($SCRATCH_DEV_POOL) is set"
 565                         exit 1
 566                 fi
 567                 SCRATCH_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'`
 568                 export SCRATCH_DEV
 569                 export SCRATCH_DEV_NOT_SET=true
 570         fi
 571
 572         _check_device SCRATCH_DEV optional $SCRATCH_DEV
 573         if [ ! -z "$SCRATCH_MNT" -a ! -d "$SCRATCH_MNT" ]; then
 574                 echo "common/config: Error: \$SCRATCH_MNT ($SCRATCH_MNT) is not a directory"
 575                 exit 1
 576         fi
 577
 578         if [ -n "$USE_EXTERNAL" ]; then
 579                 _check_device TEST_RTDEV optional $TEST_RTDEV
 580                 _check_device TEST_LOGDEV optional $TEST_LOGDEV
 581                 _check_device SCRATCH_RTDEV optional $SCRATCH_RTDEV
 582                 _check_device SCRATCH_LOGDEV optional $SCRATCH_LOGDEV
 583         fi
 584 }
 585
 586 if [ -z "$CONFIG_INCLUDED" ]; then
 587         get_next_config `echo $HOST_OPTIONS_SECTIONS | cut -f1 -d" "`
 588         export CONFIG_INCLUDED=true
 589
 590         # Autodetect fs type based on what's on $TEST_DEV unless it's been set
 591         # externally
 592         if [ -z "$FSTYP" ] && \
 593            [ "$HOSTOS" == "Linux" -o "$OSTYPE" == "linux-gnu" ] && \
 594            [ ! -z "$TEST_DEV" ]; then
 595                 FSTYP=`blkid -c /dev/null -s TYPE -o value $TEST_DEV`
 596         fi
 597         FSTYP=${FSTYP:=xfs}
 598         export FSTYP
 599         [ -z "$MOUNT_OPTIONS" ] && _mount_opts
 600         [ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
 601         [ -z "$MKFS_OPTIONS" ] && _mkfs_opts
 602         [ -z "$FSCK_OPTIONS" ] && _fsck_opts
 603 fi
 604
 605 # canonicalize the mount points
 606 # this follows symlinks and removes all trailing "/"s
 607 export TEST_DIR=`readlink -e "$TEST_DIR"`
 608 export SCRATCH_MNT=`readlink -e "$SCRATCH_MNT"`
 609
 610 # make sure this script returns success
 611 /bin/true