3 # Copyright (c) 2000-2003,2006 Silicon Graphics, Inc. All Rights Reserved.
5 # This program is free software; you can redistribute it and/or
6 # modify it under the terms of the GNU General Public License as
7 # published by the Free Software Foundation.
9 # This program is distributed in the hope that it would be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 # GNU General Public License for more details.
14 # You should have received a copy of the GNU General Public License
15 # along with this program; if not, write the Free Software Foundation,
16 # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
19 # setup and check for config parameters, and in particular
21 # EMAIL - email of the script runner.
22 # TEST_DIR - scratch test directory that is in an already
23 # mounted XFS file system, needs to be be world
25 # TEST_DEV - device for file system containing TEST_DIR
28 # SCRATCH_DEV - device you can make a scratch file system on
29 # SCRATCH_MNT - mount point for scratch file system
30 # SCRATCH_LOGDEV - scratch log device for external log testing
31 # SCRATCH_RTDEV - scratch rt dev
32 # TEST_LOGDEV - test log device for external log testing
33 # TEST_RTDEV - test rt dev
34 # TAPE_DEV - the tape device for the xfsdump tests
35 # RMT_TAPE_DEV - the remote tape device for the xfsdump tests
36 # RMT_IRIXTAPE_DEV- the IRIX remote tape device for the xfsdump tests
37 # RMT_TAPE_USER - remote user for tape device
39 # - These can be added to $HOST_CONFIG_DIR (witch default to ./config)
40 # below or a separate local configuration file can be used (using
41 # the HOST_OPTIONS variable).
42 # - This script is shared by the stress test system and the auto-qa
44 # - TEST_DEV & TEST_DIR must be assigned.
45 # - this script shouldn't make any assertions about filesystem
46 # validity or mountedness.
49 # all tests should use a common language setting to prevent golden
54 # Warning: don't put freeware before /usr/bsd on IRIX coz you'll
55 # get the wrong hostname and set your system name to -s :)
56 [ -d /usr/bsd ] && PATH=$PATH:/usr/bsd
57 [ -d /usr/freeware/bin ] && PATH=$PATH:/usr/freeware/bin
60 export HOST=`hostname -s`
61 export HOSTOS=`uname -s`
62 [ "$HOSTOS" = "IRIX64" ] && export HOSTOS="IRIX"
64 export MODULAR=0 # using XFS as a module or not
65 export BOOT="/boot" # install target for kernels
66 export EXTRA=${EXTRA:=xfs-qa}
68 # general parameters (mainly for auto-qa)
69 export SOAK_PROC=3 # -p option to fsstress
70 export SOAK_STRESS=10000 # -n option to fsstress
71 export SOAK_PASSES=-1 # count of repetitions of fsstress (while soaking)
72 export EMAIL=root@localhost # where auto-qa will send its status messages
73 export HOST_OPTIONS=${HOST_OPTIONS:=local.config}
74 export CHECK_OPTIONS=${CHECK_OPTIONS:="-g auto"}
75 export BENCH_PASSES=${BENCH_PASSES:=5}
76 export XFS_MKFS_OPTIONS=${XFS_MKFS_OPTIONS:=-bsize=4096}
77 export TIME_FACTOR=${TIME_FACTOR:=1}
78 export LOAD_FACTOR=${LOAD_FACTOR:=1}
79 export DEBUGFS_MNT=${DEBUGFS_MNT:="/sys/kernel/debug"}
81 # some constants for overlayfs setup
82 export OVL_UPPER="ovl-upper"
83 export OVL_LOWER="ovl-lower"
84 export OVL_WORK="ovl-work"
85 # overlay mount point parent must be the base fs root
86 export OVL_MNT="ovl-mnt"
89 #export DEBUG=${DEBUG:=...} # arbitrary CFLAGS really.
90 export MALLOCLIB=${MALLOCLIB:=/usr/lib/libefence.a}
91 export LOCAL_CONFIGURE_OPTIONS=${LOCAL_CONFIGURE_OPTIONS:=--enable-readline=yes}
93 export RECREATE_TEST_DEV=false
95 # $1 = prog to look for, $2* = default pathnames if not found in $PATH
98 p=`which $1 2> /dev/null`
99 if [ -n "$p" -a -x "$p" ]; then
117 # Handle mkfs.btrfs which does (or does not) require -f to overwrite
118 set_btrfs_mkfs_prog_path_with_opts()
120 p=`set_prog_path mkfs.btrfs`
121 if [ "$p" != "" ] && grep -q 'force overwrite' $p; then
135 export MKFS_PROG="`set_prog_path mkfs`"
136 [ "$MKFS_PROG" = "" ] && _fatal "mkfs not found"
138 export MOUNT_PROG="`set_prog_path mount`"
139 [ "$MOUNT_PROG" = "" ] && _fatal "mount not found"
141 export UMOUNT_PROG="`set_prog_path umount`"
142 [ "$UMOUNT_PROG" = "" ] && _fatal "umount not found"
144 export FSSTRESS_PROG="./ltp/fsstress"
145 [ ! -x $FSSTRESS_PROG ] && _fatal "fsstress not found or executable"
147 export PERL_PROG="`set_prog_path perl`"
148 [ "$PERL_PROG" = "" ] && _fatal "perl not found"
150 export AWK_PROG="`set_prog_path awk`"
151 [ "$AWK_PROG" = "" ] && _fatal "awk not found"
153 export SED_PROG="`set_prog_path sed`"
154 [ "$SED_PROG" = "" ] && _fatal "sed not found"
156 export BC_PROG="`set_prog_path bc`"
157 [ "$BC_PROG" = "" ] && _fatal "bc not found"
159 export PS_ALL_FLAGS="-ef"
161 export DF_PROG="`set_prog_path df`"
162 [ "$DF_PROG" = "" ] && _fatal "df not found"
163 [ "$HOSTOS" = "Linux" ] && export DF_PROG="$DF_PROG -T -P"
165 export XFS_IO_PROG="`set_prog_path xfs_io`"
166 [ "$XFS_IO_PROG" = "" ] && _fatal "xfs_io not found"
168 export XFS_LOGPRINT_PROG="`set_prog_path xfs_logprint`"
169 export XFS_REPAIR_PROG="`set_prog_path xfs_repair`"
170 export XFS_DB_PROG="`set_prog_path xfs_db`"
171 export XFS_GROWFS_PROG=`set_prog_path xfs_growfs`
172 export XFS_SCRUB_PROG="`set_prog_path xfs_scrub`"
173 export XFS_PARALLEL_REPAIR_PROG="`set_prog_path xfs_prepair`"
174 export XFS_PARALLEL_REPAIR64_PROG="`set_prog_path xfs_prepair64`"
175 export __XFSDUMP_PROG="`set_prog_path xfsdump`"
176 if [ -n "$__XFSDUMP_PROG" ]; then
177 export XFSDUMP_PROG="$__XFSDUMP_PROG -e"
179 export XFSDUMP_PROG=""
181 export XFSRESTORE_PROG="`set_prog_path xfsrestore`"
182 export XFSINVUTIL_PROG="`set_prog_path xfsinvutil`"
183 export GETFATTR_PROG="`set_prog_path getfattr`"
184 export SETFATTR_PROG="`set_prog_path setfattr`"
185 export CHACL_PROG="`set_prog_path chacl`"
186 export ATTR_PROG="`set_prog_path attr`"
187 export QUOTA_PROG="`set_prog_path quota`"
188 export XFS_QUOTA_PROG="`set_prog_path xfs_quota`"
189 export KILLALL_PROG="`set_prog_path killall`"
190 export INDENT_PROG="`set_prog_path indent`"
191 export XFS_COPY_PROG="`set_prog_path xfs_copy`"
192 export FSTRIM_PROG="`set_prog_path fstrim`"
193 export DUMPE2FS_PROG="`set_prog_path dumpe2fs`"
194 export FIO_PROG="`set_prog_path fio`"
195 export FILEFRAG_PROG="`set_prog_path filefrag`"
196 export E4DEFRAG_PROG="`set_prog_path e4defrag`"
197 export LOGGER_PROG="`set_prog_path logger`"
198 export DBENCH_PROG="`set_prog_path dbench`"
199 export DMSETUP_PROG="`set_prog_path dmsetup`"
200 export WIPEFS_PROG="`set_prog_path wipefs`"
201 export DUMP_PROG="`set_prog_path dump`"
202 export RESTORE_PROG="`set_prog_path restore`"
203 export LVM_PROG="`set_prog_path lvm`"
204 export CHATTR_PROG="`set_prog_path chattr`"
205 export DEBUGFS_PROG="`set_prog_path debugfs`"
206 export UUIDGEN_PROG="`set_prog_path uuidgen`"
207 export GETRICHACL_PROG="`set_prog_path getrichacl`"
208 export SETRICHACL_PROG="`set_prog_path setrichacl`"
209 export KEYCTL_PROG="`set_prog_path keyctl`"
210 export XZ_PROG="`set_prog_path xz`"
211 export FLOCK_PROG="`set_prog_path flock`"
212 export LDD_PROG="`set_prog_path ldd`"
213 export TIMEOUT_PROG="`set_prog_path timeout`"
215 # use 'udevadm settle' or 'udevsettle' to wait for lv to be settled.
216 # newer systems have udevadm command but older systems like RHEL5 don't.
217 # But if neither one is available, just set it to "sleep 1" to wait for lv to
219 UDEV_SETTLE_PROG="`set_prog_path udevadm`"
220 if [ "$UDEV_SETTLE_PROG" == "" ]; then
221 # try udevsettle command
222 UDEV_SETTLE_PROG="`set_prog_path udevsettle`"
224 # udevadm is available, add 'settle' as subcommand
225 UDEV_SETTLE_PROG="$UDEV_SETTLE_PROG settle"
227 # neither command is available, use sleep 1
228 if [ "$UDEV_SETTLE_PROG" == "" ]; then
229 UDEV_SETTLE_PROG="sleep 1"
231 export UDEV_SETTLE_PROG
235 export MKFS_XFS_PROG="`set_prog_path mkfs_xfs`"
236 export MKFS_UDF_PROG="`set_prog_path mkfs_udf`"
237 export XFS_FSR_PROG="`set_prog_path /usr/etc/fsr_xfs`"
238 export MKFS_NFS_PROG="false"
239 export MKFS_CIFS_PROG="false"
242 export MKFS_XFS_PROG="`set_prog_path mkfs.xfs`"
243 export MKFS_EXT4_PROG="`set_prog_path mkfs.ext4`"
244 export MKFS_UDF_PROG="`set_prog_path mkudffs`"
245 export MKFS_BTRFS_PROG="`set_btrfs_mkfs_prog_path_with_opts`"
246 export MKFS_F2FS_PROG="`set_prog_path mkfs.f2fs`"
247 export DUMP_F2FS_PROG="`set_prog_path dump.f2fs`"
248 export BTRFS_UTIL_PROG="`set_prog_path btrfs`"
249 export BTRFS_SHOW_SUPER_PROG="`set_prog_path btrfs-show-super`"
250 export BTRFS_CONVERT_PROG="`set_prog_path btrfs-convert`"
251 export XFS_FSR_PROG="`set_prog_path xfs_fsr`"
252 export MKFS_NFS_PROG="false"
253 export MKFS_CIFS_PROG="false"
254 export MKFS_OVERLAY_PROG="false"
255 export MKFS_REISER4_PROG="`set_prog_path mkfs.reiser4`"
256 export E2FSCK_PROG="`set_prog_path e2fsck`"
257 export TUNE2FS_PROG="`set_prog_path tune2fs`"
261 # SELinux adds extra xattrs which can mess up our expected output.
262 # So, mount with a context, and they won't be created
263 # # nfs_t is a "liberal" context so we can use it.
264 if [ -x /usr/sbin/selinuxenabled ] && /usr/sbin/selinuxenabled; then
265 SELINUX_MOUNT_OPTIONS="-o context=system_u:object_r:nfs_t:s0"
266 export SELINUX_MOUNT_OPTIONS
269 # check if mkfs.xfs supports v5 xfs
270 XFS_MKFS_HAS_NO_META_SUPPORT=""
271 touch /tmp/crc_check.img
272 $MKFS_XFS_PROG -N -d file,name=/tmp/crc_check.img,size=32m -m crc=0 \
274 if [ $? -ne 0 ]; then
275 XFS_MKFS_HAS_NO_META_SUPPORT=true
277 rm -f /tmp/crc_check.img
278 export XFS_MKFS_HAS_NO_META_SUPPORT
280 # new doesn't need config file parsed, we can stop here
281 if [ "$iam" == "new" ]; then
289 export MOUNT_OPTIONS=$XFS_MOUNT_OPTIONS
292 export MOUNT_OPTIONS=$UDF_MOUNT_OPTIONS
295 export MOUNT_OPTIONS=$NFS_MOUNT_OPTIONS
298 export MOUNT_OPTIONS=$CIFS_MOUNT_OPTIONS
301 export MOUNT_OPTIONS=$CEPHFS_MOUNT_OPTIONS
304 export MOUNT_OPTIONS=$OVERLAY_MOUNT_OPTIONS
306 ext2|ext3|ext4|ext4dev)
307 # acls & xattrs aren't turned on by default on ext$FOO
308 export MOUNT_OPTIONS="-o acl,user_xattr $EXT_MOUNT_OPTIONS"
311 export MOUNT_OPTIONS="-o acl,user_xattr $F2FS_MOUNT_OPTIONS"
314 # acls & xattrs aren't turned on by default on reiserfs
315 export MOUNT_OPTIONS="-o acl,user_xattr $REISERFS_MOUNT_OPTIONS"
318 # acls & xattrs aren't supported by reiser4
319 export MOUNT_OPTIONS=$REISER4_MOUNT_OPTIONS
322 # acls aren't turned on by default on gfs2
323 export MOUNT_OPTIONS="-o acl $GFS2_MOUNT_OPTIONS"
326 # We need to specify the size at mount, use 1G by default
327 export MOUNT_OPTIONS="-o size=1G $TMPFS_MOUNT_OPTIONS"
338 export TEST_FS_MOUNT_OPTS=$CIFS_MOUNT_OPTIONS
341 export TEST_FS_MOUNT_OPTS=$CEPHFS_MOUNT_OPTIONS
352 export MKFS_OPTIONS=$XFS_MKFS_OPTIONS
355 [ ! -z "$udf_fsize" ] && \
356 UDF_MKFS_OPTIONS="$UDF_MKFS_OPTIONS -s $udf_fsize"
357 export MKFS_OPTIONS=$UDF_MKFS_OPTIONS
360 export MKFS_OPTIONS=$NFS_MKFS_OPTIONS
363 export MKFS_OPTIONS=$CIFS_MKFS_OPTIONS
366 export MKFS_OPTIONS=$CEPHFS_MKFS_OPTIONS
369 export MKFS_OPTIONS="$REISERFS_MKFS_OPTIONS -q"
372 export MKFS_OPTIONS=$REISER4_MKFS_OPTIONS
375 export MKFS_OPTIONS="$GFS2_MKFS_OPTIONS -O -p lock_nolock"
378 export MKFS_OPTIONS="$JFS_MKFS_OPTIONS -q"
381 export MKFS_OPTIONS="$F2FS_MKFS_OPTIONS"
391 ext2|ext3|ext4|ext4dev)
392 export FSCK_OPTIONS="-nf"
395 export FSCK_OPTIONS="--yes"
398 export FSCK_OPTIONS=""
401 export FSCK_OPTIONS="-n"
408 [ "$HOST_CONFIG_DIR" ] || HOST_CONFIG_DIR=`pwd`/configs
410 [ -f /etc/xfsqa.config ] && export HOST_OPTIONS=/etc/xfsqa.config
411 [ -f $HOST_CONFIG_DIR/$HOST ] && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST
412 [ -f $HOST_CONFIG_DIR/$HOST.config ] && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST.config
415 # Returns a list of sections in config file
416 # Each section starts with the section name in the format
417 # [section_name1]. Only alphanumeric characters and '_' is allowed
418 # in the section name otherwise the section will not be resognised.
419 # Section name must be contained between square brackets.
420 get_config_sections() {
421 sed -n -e "s/^\[\([[:alnum:]_]*\)\]/\1/p" < $1
424 if [ ! -f "$HOST_OPTIONS" ]; then
428 export HOST_OPTIONS_SECTIONS="-no-sections-"
429 export OPTIONS_HAVE_SECTIONS=false
430 if [ -f "$HOST_OPTIONS" ]; then
431 export HOST_OPTIONS_SECTIONS=`get_config_sections $HOST_OPTIONS`
432 if [ -z "$HOST_OPTIONS_SECTIONS" ]; then
434 export HOST_OPTIONS_SECTIONS="-no-sections-"
436 export OPTIONS_HAVE_SECTIONS=true
446 if [ -z "$dev" ]; then
447 if [ "$dev_needed" == "required" ]; then
448 _fatal "common/config: $name is required but not defined!"
453 if [ -b "$dev" ] || ( echo $dev | grep -qE ":|//" ); then
454 # block device or a network url
458 if [ "$FSTYP" == "overlay" ]; then
459 if [ ! -d "$dev" ]; then
460 _fatal "common/config: $name ($dev) is not a directory for overlay"
463 _fatal "common/config: $name ($dev) is not a block device or a network filesystem"
467 # check and return a canonical mount point path
468 _canonicalize_mountpoint()
473 if [ -d "$dir" ]; then
474 # this follows symlinks and removes all trailing "/"s
479 if [ "$FSTYP" != "overlay" ] || [[ "$name" == OVL_BASE_* ]]; then
480 _fatal "common/config: $name ($dir) is not a directory"
483 # base fs may not be mounted yet, so just check that parent dir
484 # exists (where base fs will be mounted) because we are going to
485 # mkdir the overlay mount point dir anyway
486 local base=`basename $dir`
487 local parent=`dirname $dir`
488 parent=`_canonicalize_mountpoint OVL_BASE_$name "$parent"`
490 # prepend the overlay mount point to canonical parent path
494 # On check -overlay, for the non multi section config case, this
495 # function is called on every test, before init_rc().
496 # When SCRATCH/TEST_* vars are defined in config file, config file
497 # is sourced on every test and this function overrides the vars
499 # When SCRATCH/TEST_* vars are defined in evironment and not
500 # in config file, this function is called after vars have already
501 # been overriden in the previous test.
502 # In that case, TEST_DEV is a directory and not a blockdev and
503 # the function will return without overriding the SCRATCH/TEST_* vars.
504 _overlay_config_override()
506 # There are 2 options for configuring overlayfs tests:
508 # 1. (legacy) SCRATCH/TEST_DEV point to existing directories
509 # on an already mounted fs. In this case, the new
510 # OVL_BASE_SCRATCH/TEST_* vars are set to use the legacy
511 # vars values (even though they may not be mount points).
513 [ ! -d "$TEST_DEV" ] || export OVL_BASE_TEST_DIR="$TEST_DEV"
514 [ ! -d "$SCRATCH_DEV" ] || export OVL_BASE_SCRATCH_MNT="$SCRATCH_DEV"
516 # 2. SCRATCH/TEST_DEV point to the base fs partitions. In this case,
517 # the new OVL_BASE_SCRATCH/TEST_DEV/MNT vars are set to the values
518 # of the configured base fs and SCRATCH/TEST_DEV vars are set to the
519 # overlayfs base and mount dirs inside base fs mount.
520 [ -b "$TEST_DEV" ] || return 0
522 # Config file may specify base fs type, but we obay -overlay flag
523 export OVL_BASE_FSTYP="$FSTYP"
526 # Store original base fs vars
527 export OVL_BASE_TEST_DEV="$TEST_DEV"
528 export OVL_BASE_TEST_DIR="$TEST_DIR"
529 export OVL_BASE_MOUNT_OPTIONS="$MOUNT_OPTIONS"
531 # Set TEST vars to overlay base and mount dirs inside base fs
532 export TEST_DEV="$OVL_BASE_TEST_DIR"
533 export TEST_DIR="$OVL_BASE_TEST_DIR/$OVL_MNT"
534 export MOUNT_OPTIONS="$OVERLAY_MOUNT_OPTIONS"
536 [ -b "$SCRATCH_DEV" ] || return 0
538 # Store original base fs vars
539 export OVL_BASE_SCRATCH_DEV="$SCRATCH_DEV"
540 export OVL_BASE_SCRATCH_MNT="$SCRATCH_MNT"
542 # Set SCRATCH vars to overlay base and mount dirs inside base fs
543 export SCRATCH_DEV="$OVL_BASE_SCRATCH_MNT"
544 export SCRATCH_MNT="$OVL_BASE_SCRATCH_MNT/$OVL_MNT"
547 _overlay_config_restore()
550 [ -z "$OVL_BASE_FSTYP" ] || export FSTYP=$OVL_BASE_FSTYP
551 [ -z "$OVL_BASE_TEST_DEV" ] || export TEST_DEV=$OVL_BASE_TEST_DEV
552 [ -z "$OVL_BASE_TEST_DIR" ] || export TEST_DIR=$OVL_BASE_TEST_DIR
553 [ -z "$OVL_BASE_SCRATCH_DEV" ] || export SCRATCH_DEV=$OVL_BASE_SCRATCH_DEV
554 [ -z "$OVL_BASE_SCRATCH_MNT" ] || export SCRATCH_MNT=$OVL_BASE_SCRATCH_MNT
555 [ -z "$OVL_BASE_MOUNT_OPTIONS" ] || export MOUNT_OPTIONS=$OVL_BASE_MOUNT_OPTIONS
558 # Parse config section options. This function will parse all the configuration
559 # within a single section which name is passed as an argument. For section
560 # name format see comments in get_config_sections().
561 # Empty lines and everything after '#' will be ignored.
562 # Configuration options should be defined in the format
564 # CONFIG_OPTION=value
566 # This 'CONFIG_OPTION' variable and will be exported as an environment variable.
567 parse_config_section() {
569 if ! $OPTIONS_HAVE_SECTIONS; then
572 eval `sed -e 's/[[:space:]]*\=[[:space:]]*/=/g' \
574 -e 's/[[:space:]]*$//' \
575 -e 's/^[[:space:]]*//' \
576 -e "s/^\([^=]*\)=\"\?'\?\([^\"']*\)\"\?'\?$/export \1=\"\2\"/" \
578 | sed -n -e "/^\[$SECTION\]/,/^\s*\[/{/^[^#].*\=.*/p;}"`
582 if [ ! -z "$CONFIG_INCLUDED" ] && ! $OPTIONS_HAVE_SECTIONS; then
586 # We might have overriden FSTYP and TEST/SCRATCH vars with overlay values
587 # in the previous section, so restore them to original values stored in
589 # We need to do this *before* old FSTYP and MOUNT_OPTIONS are recorded
590 # and *before* SCRATCH_DEV and MOUNT_OPTIONS are unset
591 if [ "$FSTYP" == "overlay" ]; then
592 _overlay_config_restore
595 local OLD_FSTYP=$FSTYP
596 local OLD_MOUNT_OPTIONS=$MOUNT_OPTIONS
597 local OLD_TEST_FS_MOUNT_OPTS=$TEST_FS_MOUNT_OPTS
598 local OLD_MKFS_OPTIONS=$MKFS_OPTIONS
599 local OLD_FSCK_OPTIONS=$FSCK_OPTIONS
600 local OLD_USE_EXTERNAL=$USE_EXTERNAL
607 # We might have deduced SCRATCH_DEV from the SCRATCH_DEV_POOL in the previous
608 # run, so we have to unset it now.
609 if [ "$SCRATCH_DEV_NOT_SET" == "true" ]; then
613 parse_config_section $1
615 if [ ! -z "$OLD_FSTYP" ] && [ $OLD_FSTYP != $FSTYP ]; then
616 [ -z "$MOUNT_OPTIONS" ] && _mount_opts
617 [ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
618 [ -z "$MKFS_OPTIONS" ] && _mkfs_opts
619 [ -z "$FSCK_OPTIONS" ] && _fsck_opts
621 # clear the external devices if we are not using them
622 if [ -z "$USE_EXTERNAL" ]; then
629 [ -z "$MOUNT_OPTIONS" ] && export MOUNT_OPTIONS=$OLD_MOUNT_OPTIONS
630 [ -z "$TEST_FS_MOUNT_OPTS" ] && export TEST_FS_MOUNT_OPTS=$OLD_TEST_FS_MOUNT_OPTS
631 [ -z "$MKFS_OPTIONS" ] && export MKFS_OPTIONS=$OLD_MKFS_OPTIONS
632 [ -z "$FSCK_OPTIONS" ] && export FSCK_OPTIONS=$OLD_FSCK_OPTIONS
633 [ -z "$USE_EXTERNAL" ] && export USE_EXTERNAL=$OLD_USE_EXTERNAL
636 # set default RESULT_BASE
637 if [ -z "$RESULT_BASE" ]; then
638 export RESULT_BASE="$here/results/"
641 # Mandatory Config values.
643 [ -z "$EMAIL" ] && MC="$MC EMAIL"
644 [ -z "$TEST_DIR" ] && MC="$MC TEST_DIR"
645 [ -z "$TEST_DEV" ] && MC="$MC TEST_DEV"
647 if [ -n "$MC" ]; then
648 echo "Warning: need to define parameters for host $HOST"
649 echo " or set variables:"
654 _check_device TEST_DEV required $TEST_DEV
655 export TEST_DIR=`_canonicalize_mountpoint TEST_DIR $TEST_DIR`
657 # a btrfs tester will set only SCRATCH_DEV_POOL, we will put first of its dev
658 # to SCRATCH_DEV and rest to SCRATCH_DEV_POOL to maintain the backward compatibility
659 if [ ! -z "$SCRATCH_DEV_POOL" ]; then
660 if [ ! -z "$SCRATCH_DEV" ]; then
661 echo "common/config: Error: \$SCRATCH_DEV ($SCRATCH_DEV) should be unset when \$SCRATCH_DEV_POOL ($SCRATCH_DEV_POOL) is set"
664 SCRATCH_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'`
666 export SCRATCH_DEV_NOT_SET=true
669 _check_device SCRATCH_DEV optional $SCRATCH_DEV
670 export SCRATCH_MNT=`_canonicalize_mountpoint SCRATCH_MNT $SCRATCH_MNT`
672 if [ -n "$USE_EXTERNAL" ]; then
673 _check_device TEST_RTDEV optional $TEST_RTDEV
674 _check_device TEST_LOGDEV optional $TEST_LOGDEV
675 _check_device SCRATCH_RTDEV optional $SCRATCH_RTDEV
676 _check_device SCRATCH_LOGDEV optional $SCRATCH_LOGDEV
679 # Override FSTYP from config when running ./check -overlay
680 # and maybe override base fs TEST/SCRATCH_DEV with overlay base dirs.
681 # We need to do this *after* default mount options are set by base FSTYP
682 # and *after* SCRATCH_DEV is deduced from SCRATCH_DEV_POOL
683 if [ "$OVERLAY" == "true" -o "$FSTYP" == "overlay" ]; then
684 _overlay_config_override
688 if [ -z "$CONFIG_INCLUDED" ]; then
689 get_next_config `echo $HOST_OPTIONS_SECTIONS | cut -f1 -d" "`
690 export CONFIG_INCLUDED=true
692 # Autodetect fs type based on what's on $TEST_DEV unless it's been set
694 if [ -z "$FSTYP" ] && \
695 [ "$HOSTOS" == "Linux" -o "$OSTYPE" == "linux-gnu" ] && \
696 [ ! -z "$TEST_DEV" ]; then
697 FSTYP=`blkid -c /dev/null -s TYPE -o value $TEST_DEV`
701 [ -z "$MOUNT_OPTIONS" ] && _mount_opts
702 [ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
703 [ -z "$MKFS_OPTIONS" ] && _mkfs_opts
704 [ -z "$FSCK_OPTIONS" ] && _fsck_opts
706 # We get here for the non multi section case, on every test that sources
707 # common/rc after re-sourcing the HOST_OPTIONS config file.
708 # Because of this re-sourcing, we need to re-canonicalize the configured
709 # mount points and re-override TEST/SCRATCH_DEV overlay vars.
711 # canonicalize the mount points
712 # this follows symlinks and removes all trailing "/"s
713 export TEST_DIR=`_canonicalize_mountpoint TEST_DIR $TEST_DIR`
714 export SCRATCH_MNT=`_canonicalize_mountpoint SCRATCH_MNT $SCRATCH_MNT`
716 # Override FSTYP from config when running ./check -overlay
717 # and maybe override base fs TEST/SCRATCH_DEV with overlay base dirs
718 if [ "$OVERLAY" == "true" -o "$FSTYP" == "overlay" ]; then
719 _overlay_config_override
723 # make sure this script returns success