2 # SPDX-License-Identifier: GPL-2.0+
3 # Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved.
7 BC=$(which bc 2> /dev/null) || BC=
9 # Some tests are not relevant or functional when testing XFS realtime
10 # subvolumes along with the rtinherit=1 mkfs option. In these cases,
11 # this test will opt-out of the test.
12 _require_no_rtinherit()
14 [ "$FSTYP" = "xfs" ] && echo "$MKFS_OPTIONS" |
15 egrep -q "rtinherit([^=]|=1|$)" && \
16 _notrun "rtinherit mkfs option is not supported by this test."
22 _notrun "this test requires 'bc' tool for doing math operations"
28 [ $# -le 0 ] && return
29 LANG=C echo "scale=0; $@" | "$BC" -q 2> /dev/null
34 command dd --help 2>&1 | grep noxfer >/dev/null
37 command dd status=noxfer $@
43 # Prints the md5 checksum of a given file
46 md5sum $1 | cut -d ' ' -f1
49 # Write a byte into a range of a file
55 local xfs_io_args="$5"
57 $XFS_IO_PROG $xfs_io_args -f -c "pwrite -S $pattern $offset $len" "$file"
60 # mmap-write a byte into a range of a file
68 $XFS_IO_PROG -f -c "mmap -rw 0 $mmap_len" -c "mwrite -S $pattern $offset $len" "$file"
71 # ls -l w/ selinux sometimes puts a dot at the end:
72 # -rwxrw-r--. id1 id2 file1
73 # Also filter out lost+found directory on extN file system if present
77 ls -l $* | sed "s/\(^[-rwxdlbcpsStT]*\)\. /\1 /" | grep -v 'lost+found'
101 echo "$_err_msg" | tee -a $seqres.full
102 echo "(see $seqres.full for details)"
105 # make sure we have a standard umask
108 # check for correct setup and source the $FSTYP specific functions now
111 [ "$XFS_LOGPRINT_PROG" = "" ] && _fatal "xfs_logprint not found"
112 [ "$XFS_REPAIR_PROG" = "" ] && _fatal "xfs_repair not found"
113 [ "$XFS_DB_PROG" = "" ] && _fatal "xfs_db not found"
114 [ "$MKFS_XFS_PROG" = "" ] && _fatal "mkfs_xfs not found"
115 [ "$XFS_INFO_PROG" = "" ] && _fatal "xfs_info not found"
120 [ "$MKFS_UDF_PROG" = "" ] && _fatal "mkfs_udf/mkudffs not found"
123 [ "$MKFS_BTRFS_PROG" = "" ] && _fatal "mkfs.btrfs not found"
128 [ "$MKFS_EXT4_PROG" = "" ] && _fatal "mkfs.ext4 not found"
131 [ "$MKFS_F2FS_PROG" = "" ] && _fatal "mkfs.f2fs not found"
148 [ "$MKFS_REISER4_PROG" = "" ] && _fatal "mkfs.reiser4 not found"
153 [ "$UBIUPDATEVOL_PROG" = "" ] && _fatal "ubiupdatevol not found"
157 if [ ! -z "$REPORT_LIST" ]; then
167 # Get hugepagesize in bytes
170 local hugepgsz=$(awk '/Hugepagesize/ {print $2}' /proc/meminfo)
171 # Call _notrun if $hugepgsz is not a number
172 echo "$hugepgsz" | egrep -q ^[0-9]+$ || \
173 _notrun "Cannot get the value of Hugepagesize"
174 echo $((hugepgsz * 1024))
179 $MOUNT_PROG `_mount_ops_filter $*`
182 # Call _mount to do mount operation but also save mountpoint to
183 # MOUNTED_POINT_STACK. Note that the mount point must be the last parameter
186 local mnt_point=${!#}
187 local mnt_dev=${@:(-2):1}
188 local scratch_opts=""
189 if [ "$mnt_dev" = "$SCRATCH_DEV" ]; then
190 _scratch_options mount
191 scratch_opts="$SCRATCH_OPTIONS"
194 _mount $scratch_opts $*
195 if [ $? -eq 0 ]; then
196 # mount --move operation updates the mountpoint, so remove
197 # the old one and insert the new one
198 if [[ "$*" =~ --move|-M ]]; then
199 MOUNTED_POINT_STACK=`echo $MOUNTED_POINT_STACK | \
202 MOUNTED_POINT_STACK="$mnt_point $MOUNTED_POINT_STACK"
208 # Unmount the last mounted mountpoint in MOUNTED_POINT_STACK
209 # and return it to caller
212 local last_mnt=`echo $MOUNTED_POINT_STACK | awk '{print $1}'`
214 if [ -n "$last_mnt" ]; then
215 $UMOUNT_PROG $last_mnt
217 MOUNTED_POINT_STACK=`echo $MOUNTED_POINT_STACK | cut -d\ -f2-`
220 # Unmount all mountpoints in MOUNTED_POINT_STACK and clear the stack
223 if [ -n "$MOUNTED_POINT_STACK" ]; then
224 $UMOUNT_PROG $MOUNTED_POINT_STACK
226 MOUNTED_POINT_STACK=""
236 if [ "$FSTYP" != "xfs" ]; then
242 SCRATCH_OPTIONS="$SCRATCH_OPTIONS -f"
251 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_RTDEV" ] && \
252 SCRATCH_OPTIONS="$SCRATCH_OPTIONS ${rt_opt}rtdev=$SCRATCH_RTDEV"
253 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
254 SCRATCH_OPTIONS="$SCRATCH_OPTIONS ${log_opt}logdev=$SCRATCH_LOGDEV"
264 if [ "$FSTYP" != "xfs" ]; then
278 [ "$USE_EXTERNAL" = yes -a ! -z "$TEST_RTDEV" ] && \
279 TEST_OPTIONS="$TEST_OPTIONS ${rt_opt}rtdev=$TEST_RTDEV"
280 [ "$USE_EXTERNAL" = yes -a ! -z "$TEST_LOGDEV" ] && \
281 TEST_OPTIONS="$TEST_OPTIONS ${log_opt}logdev=$TEST_LOGDEV"
287 local last_index=$(( $# - 1 ))
289 #get mount point to handle dmapi mtpt option correctly
290 [ $last_index -gt 0 ] && shift $last_index
293 echo $params | sed -e 's/dmapi/dmi/' \
294 | $PERL_PROG -ne "s#mtpt=[^,|^\n|^\s]*#mtpt=$fs_escaped\1\2#; print;"
298 # Used for mounting non-scratch devices (e.g. loop, dm constructs)
299 # with the safe set of scratch mount options (e.g. loop image may be
300 # hosted on $SCRATCH_DEV, so can't use external scratch devices).
301 _common_dev_mount_options()
303 echo $MOUNT_OPTIONS $SELINUX_MOUNT_OPTIONS $*
306 _scratch_mount_options()
308 _scratch_options mount
310 echo `_common_dev_mount_options $*` $SCRATCH_OPTIONS \
311 $SCRATCH_DEV $SCRATCH_MNT
318 local fstyp=`$DF_PROG $dir | tail -1 | $AWK_PROG '{print $2}'`
321 $XFS_INFO_PROG $dir | grep -q "ftype=1"
324 local dev=`$DF_PROG $dir | tail -1 | $AWK_PROG '{print $1}'`
325 tune2fs -l $dev | grep -q filetype
328 local testfile=$dir/$$.ftype
330 # look for DT_UNKNOWN files
331 local unknowns=$($here/src/t_dir_type $dir u | wc -l)
333 # 0 unknowns is success
339 # mount scratch device with given options but don't check mount status
342 if [ "$FSTYP" == "overlay" ]; then
343 _overlay_scratch_mount $*
346 _mount -t $FSTYP `_scratch_mount_options $*`
349 # mount scratch device with given options and _fail if mount fails
352 _try_scratch_mount $* || _fail "mount failed"
359 _overlay_scratch_unmount
362 $UMOUNT_PROG $SCRATCH_MNT
365 $UMOUNT_PROG $SCRATCH_DEV
374 if test -n "$opts"; then
375 _try_scratch_mount "-o remount,$opts"
379 _scratch_cycle_mount()
383 if [ "$FSTYP" = tmpfs ]; then
384 _scratch_remount "$opts"
387 if test -n "$opts"; then
391 _try_scratch_mount "$opts" || _fail "cycle mount failed"
396 if [ $FSTYP = "overlay" ]; then
397 # In lagacy overlay usage, it may specify directory as
398 # SCRATCH_DEV, in this case OVL_BASE_SCRATCH_DEV
399 # will be null, so check OVL_BASE_SCRATCH_DEV before
400 # running shutdown to avoid shutting down base fs accidently.
401 if [ -z $OVL_BASE_SCRATCH_DEV ]; then
402 _fail "_scratch_shutdown: call _require_scratch_shutdown first in test"
404 $here/src/godown $* $OVL_BASE_SCRATCH_MNT
407 $here/src/godown $* $SCRATCH_MNT
411 # Return a file path that can be used to shut down the scratch filesystem.
412 # Caller should _require_scratch_shutdown before using this.
413 _scratch_shutdown_handle()
415 if [ $FSTYP = "overlay" ]; then
416 echo $OVL_BASE_SCRATCH_MNT
424 if [ "$FSTYP" == "overlay" ]; then
425 _overlay_test_mount $*
429 _mount -t $FSTYP $TEST_OPTIONS $TEST_FS_MOUNT_OPTS $SELINUX_MOUNT_OPTIONS $* $TEST_DEV $TEST_DIR
434 if [ "$FSTYP" == "overlay" ]; then
435 _overlay_test_unmount
437 $UMOUNT_PROG $TEST_DEV
443 if [ "$FSTYP" = tmpfs ]; then
450 _scratch_mkfs_options()
452 _scratch_options mkfs
453 echo $SCRATCH_OPTIONS $MKFS_OPTIONS $* $SCRATCH_DEV
456 # Do the actual mkfs work on SCRATCH_DEV. Firstly mkfs with both MKFS_OPTIONS
457 # and user specified mkfs options, if that fails (due to conflicts between mkfs
458 # options), do a second mkfs with only user provided mkfs options.
460 # First param is the mkfs command without any mkfs options and device.
461 # Second param is the filter to remove unnecessary messages from mkfs stderr.
462 # Other extra mkfs options are followed.
468 local extra_mkfs_options=$*
470 local tmp=`mktemp -u`
472 # save mkfs output in case conflict means we need to run again.
473 # only the output for the mkfs that applies should be shown
474 eval "$mkfs_cmd $MKFS_OPTIONS $extra_mkfs_options $SCRATCH_DEV" \
475 2>$tmp.mkfserr 1>$tmp.mkfsstd
478 # a mkfs failure may be caused by conflicts between $MKFS_OPTIONS and
479 # $extra_mkfs_options
480 if [ $mkfs_status -ne 0 -a -n "$extra_mkfs_options" ]; then
482 echo -n "** mkfs failed with extra mkfs options "
483 echo "added to \"$MKFS_OPTIONS\" by test $seq **"
484 echo -n "** attempting to mkfs using only test $seq "
485 echo "options: $extra_mkfs_options **"
488 # running mkfs again. overwrite previous mkfs output files
489 eval "$mkfs_cmd $extra_mkfs_options $SCRATCH_DEV" \
490 2>$tmp.mkfserr 1>$tmp.mkfsstd
494 # output stored mkfs output, filtering unnecessary output from stderr
496 eval "cat $tmp.mkfserr | $mkfs_filter" >&2
498 rm -f $tmp.mkfserr $tmp.mkfsstd
508 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
509 options="-l $SCRATCH_LOGDEV"
511 xfs_metadump $options "$@" $SCRATCH_DEV $dumpfile
514 _setup_large_ext4_fs()
519 [ "$LARGE_SCRATCH_DEV" != yes ] && return 0
520 [ -z "$SCRATCH_DEV_EMPTY_SPACE" ] && SCRATCH_DEV_EMPTY_SPACE=0
521 [ $SCRATCH_DEV_EMPTY_SPACE -ge $fs_size ] && return 0
523 # Default free space in the FS is 50GB, but you can specify more via
524 # SCRATCH_DEV_EMPTY_SPACE
525 local space_to_consume=$(($fs_size - 50*1024*1024*1024 - $SCRATCH_DEV_EMPTY_SPACE))
527 # mount the filesystem and create 16TB - 4KB files until we consume
528 # all the necessary space.
529 _try_scratch_mount 2>&1 >$tmp_dir/mnt.err
531 if [ $status -ne 0 ]; then
533 cat $tmp_dir/mnt.err >&2
534 rm -f $tmp_dir/mnt.err
537 rm -f $tmp_dir/mnt.err
539 local file_size=$((16*1024*1024*1024*1024 - 4096))
541 while [ $space_to_consume -gt $file_size ]; do
544 -c "truncate $file_size" \
545 -c "falloc -k 0 $file_size" \
546 $SCRATCH_MNT/.use_space.$nfiles 2>&1
548 if [ $status -ne 0 ]; then
552 space_to_consume=$(( $space_to_consume - $file_size ))
553 nfiles=$(($nfiles + 1))
556 # consume the remaining space.
557 if [ $space_to_consume -gt 0 ]; then
559 -c "truncate $space_to_consume" \
560 -c "falloc -k 0 $space_to_consume" \
561 $SCRATCH_MNT/.use_space.$nfiles 2>&1
564 export NUM_SPACE_FILES=$nfiles
567 if [ $status -ne 0 ]; then
568 echo "large file prealloc failed"
569 cat $tmp_dir/mnt.err >&2
577 local mkfs_cmd="$MKFS_EXT4_PROG -F"
578 local mkfs_filter="grep -v -e ^Warning: -e \"^mke2fs \" | grep -v \"^$\""
579 local tmp=`mktemp -u`
582 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
583 $mkfs_cmd -O journal_dev $MKFS_OPTIONS $SCRATCH_LOGDEV && \
584 mkfs_cmd="$mkfs_cmd -J device=$SCRATCH_LOGDEV"
586 _scratch_do_mkfs "$mkfs_cmd" "$mkfs_filter" $* 2>$tmp.mkfserr 1>$tmp.mkfsstd
589 if [ $mkfs_status -eq 0 -a "$LARGE_SCRATCH_DEV" = yes ]; then
590 # manually parse the mkfs output to get the fs size in bytes
591 local fs_size=`cat $tmp.mkfsstd | awk ' \
592 /^Block size/ { split($2, a, "="); bs = a[2] ; } \
593 / inodes, / { blks = $3 } \
594 /reserved for the super user/ { resv = $1 } \
595 END { fssize = bs * blks - resv; print fssize }'`
597 _setup_large_ext4_fs $fs_size
601 # output mkfs stdout and stderr
604 rm -f $tmp.mkfserr $tmp.mkfsstd
616 # do nothing for cifs
622 # do nothing for virtiofs
625 # do nothing for ceph
628 # do nothing for glusterfs
631 # do nothing for overlay
634 # do nothing for pvfs2
637 $MKFS_UDF_PROG $MKFS_OPTIONS $* $TEST_DEV > /dev/null
640 $MKFS_BTRFS_PROG $MKFS_OPTIONS $* $TEST_DEV > /dev/null
643 $MKFS_PROG -t $FSTYP -- -F $MKFS_OPTIONS $* $TEST_DEV
646 yes | $MKFS_PROG -t $FSTYP -- $MKFS_OPTIONS $* $TEST_DEV
653 local tmp=`mktemp -u`
662 # do nothing for virtiofs
665 # do nothing for overlay
668 # do nothing for pvfs2
671 $MKFS_UDF_PROG $MKFS_OPTIONS $* 2>$tmp.mkfserr 1>$tmp.mkfsstd
674 $MKFS_BTRFS_PROG $MKFS_OPTIONS $* 2>$tmp.mkfserr 1>$tmp.mkfsstd
677 $MKFS_PROG -t $FSTYP -- -F $MKFS_OPTIONS $* \
678 2>$tmp.mkfserr 1>$tmp.mkfsstd
681 $MKFS_PROG -t $FSTYP -- -f $MKFS_OPTIONS $* \
682 2>$tmp.mkfserr 1>$tmp.mkfsstd
685 yes | $MKFS_PROG -t $FSTYP -- $MKFS_OPTIONS $* \
686 2>$tmp.mkfserr 1>$tmp.mkfsstd
690 if [ $? -ne 0 ]; then
691 # output stored mkfs output
697 rm -f $tmp.mkfserr $tmp.mkfsstd
700 # remove all files in $SCRATCH_MNT, useful when testing on NFS/CIFS
701 _scratch_cleanup_files()
705 # Avoid rm -rf /* if we messed up
706 [ -n "$OVL_BASE_SCRATCH_MNT" ] || return 1
707 _overlay_base_scratch_mount || return 1
708 rm -rf $OVL_BASE_SCRATCH_MNT/* || return 1
709 _overlay_mkdirs $OVL_BASE_SCRATCH_MNT
710 # leave base fs mouted so tests can setup lower/upper dir files
713 [ -n "$SCRATCH_MNT" ] || return 1
715 rm -rf $SCRATCH_MNT/*
728 nfs*|cifs|ceph|overlay|glusterfs|pvfs2|9p|virtiofs)
729 # unable to re-create this fstyp, just remove all files in
730 # $SCRATCH_MNT to avoid EEXIST caused by the leftover files
731 # created in previous runs
732 _scratch_cleanup_files
736 # do nothing for tmpfs
740 # erase the UBI volume; reformated automatically on next mount
741 $UBIUPDATEVOL_PROG ${SCRATCH_DEV} -t
745 _scratch_mkfs_ext4 $*
753 mkfs_cmd="$MKFS_UDF_PROG"
757 mkfs_cmd="$MKFS_BTRFS_PROG"
761 mkfs_cmd="$MKFS_PROG -t $FSTYP -- -F"
762 mkfs_filter="grep -v -e ^Warning: -e \"^mke2fs \""
764 # put journal on separate device?
765 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
766 $mkfs_cmd -O journal_dev $MKFS_OPTIONS $SCRATCH_LOGDEV && \
767 mkfs_cmd="$mkfs_cmd -J device=$SCRATCH_LOGDEV"
770 mkfs_cmd="$MKFS_PROG -t $FSTYP -- -F"
771 mkfs_filter="grep -v -e ^Warning: -e \"^mke2fs \""
774 mkfs_cmd="$MKFS_F2FS_PROG"
778 mkfs_cmd="yes | $MKFS_PROG -t $FSTYP --"
779 mkfs_filter="grep -v -e ^mkfs\.ocfs2"
782 mkfs_cmd="yes | $MKFS_PROG -t $FSTYP --"
787 _scratch_do_mkfs "$mkfs_cmd" "$mkfs_filter" $*
791 # Helper function to get a spare or replace-target device from
792 # configured SCRATCH_DEV_POLL, must call _scratch_dev_pool_get()
793 # before _spare_dev_get(). Replace-target-device/Spare-device will
794 # be assigned to SPARE_DEV.
795 # As of now only one replace-target-device/spare-device can be
799 # _scratch_dev_pool_get() <ndevs>
803 # _scratch_dev_pool_put()
807 typeset -p SCRATCH_DEV_POOL_SAVED >/dev/null 2>&1
808 if [ $? -ne 0 ]; then
809 _fail "Bug: unset val, must call _scratch_dev_pool_get before _spare_dev_get"
812 if [ -z "$SCRATCH_DEV_POOL_SAVED" ]; then
813 _fail "Bug: str empty, must call _scratch_dev_pool_get before _spare_dev_get"
816 # Check if the spare is already assigned
817 typeset -p SPARE_DEV >/dev/null 2>&1
818 if [ $? -eq 0 ]; then
819 if [ ! -z "$SPARE_DEV" ]; then
820 _fail "Bug: SPARE_DEV = $SPARE_DEV already assigned"
824 local ndevs=`echo $SCRATCH_DEV_POOL| wc -w`
825 local config_ndevs=`echo $SCRATCH_DEV_POOL_SAVED| wc -w`
827 if [ $ndevs -eq $config_ndevs ]; then
828 _notrun "All devs used no spare"
830 # Get a dev that is not used
831 local -a devs="( $SCRATCH_DEV_POOL_SAVED )"
832 SPARE_DEV=${devs[@]:$ndevs:1}
838 typeset -p SPARE_DEV >/dev/null 2>&1
839 if [ $? -ne 0 ]; then
840 _fail "Bug: unset val, must call _spare_dev_get before its put"
843 if [ -z "$SPARE_DEV" ]; then
844 _fail "Bug: str empty, must call _spare_dev_get before its put"
851 # Generally test cases will have..
852 # _require_scratch_dev_pool X
853 # to make sure it has the enough scratch devices including
854 # replace-target and spare device. Now arg1 here is the
855 # required number of scratch devices by a-test-case excluding
856 # the replace-target and spare device. So this function will
857 # set SCRATCH_DEV_POOL to the specified number of devices.
860 # _scratch_dev_pool_get() <ndevs>
863 # _scratch_dev_pool_put()
865 _scratch_dev_pool_get()
867 if [ $# -ne 1 ]; then
868 _fail "Usage: _scratch_dev_pool_get ndevs"
872 local config_ndevs=`echo $SCRATCH_DEV_POOL| wc -w`
873 local -a devs="( $SCRATCH_DEV_POOL )"
875 typeset -p config_ndevs >/dev/null 2>&1
876 if [ $? -ne 0 ]; then
877 _fail "Bug: cant find SCRATCH_DEV_POOL ndevs"
880 if [ $config_ndevs -lt $test_ndevs ]; then
881 _notrun "Need at least test requested number of ndevs $test_ndevs"
884 SCRATCH_DEV_POOL_SAVED=${SCRATCH_DEV_POOL}
885 export SCRATCH_DEV_POOL_SAVED
886 SCRATCH_DEV_POOL=${devs[@]:0:$test_ndevs}
887 export SCRATCH_DEV_POOL
890 _scratch_dev_pool_put()
892 typeset -p SCRATCH_DEV_POOL_SAVED >/dev/null 2>&1
893 if [ $? -ne 0 ]; then
894 _fail "Bug: unset val, must call _scratch_dev_pool_get before _scratch_dev_pool_put"
897 if [ -z "$SCRATCH_DEV_POOL_SAVED" ]; then
898 _fail "Bug: str empty, must call _scratch_dev_pool_get before _scratch_dev_pool_put"
901 export SCRATCH_DEV_POOL=$SCRATCH_DEV_POOL_SAVED
902 export SCRATCH_DEV_POOL_SAVED=""
909 $MKFS_BTRFS_PROG $MKFS_OPTIONS $* $SCRATCH_DEV_POOL > /dev/null
912 echo "_scratch_pool_mkfs is not implemented for $FSTYP" 1>&2
917 # Return the amount of free memory available on the system
920 free -b | grep ^Mem | awk '{print $4}'
923 _available_memory_bytes()
925 nf=`free -b | grep ^Mem | awk '{print NF}'`
926 if [[ nf -lt 7 ]]; then
927 # Doesn't have available field. Fallback.
930 free -b | grep ^Mem | awk '{print $7}'
934 # Create fs of certain size on scratch device
935 # _scratch_mkfs_sized <size in bytes> [optional blocksize]
936 _scratch_mkfs_sized()
944 def_blksz=`echo $MKFS_OPTIONS | sed -rn 's/.*-b ?size= ?+([0-9]+).*/\1/p'`
946 ext2|ext3|ext4|ext4dev|udf|btrfs|reiser4|ocfs2|reiserfs)
947 def_blksz=`echo $MKFS_OPTIONS | sed -rn 's/.*-b ?+([0-9]+).*/\1/p'`
954 [ -n "$def_blksz" ] && blocksize=$def_blksz
955 [ -z "$blocksize" ] && blocksize=4096
958 if ! [[ $fssize =~ $re ]] ; then
959 _notrun "error: _scratch_mkfs_sized: fs size \"$fssize\" not an integer."
961 if ! [[ $blocksize =~ $re ]] ; then
962 _notrun "error: _scratch_mkfs_sized: block size \"$blocksize\" not an integer."
965 local blocks=`expr $fssize / $blocksize`
967 if [ -b "$SCRATCH_DEV" ]; then
968 local devsize=`blockdev --getsize64 $SCRATCH_DEV`
969 [ "$fssize" -gt "$devsize" ] && _notrun "Scratch device too small"
972 if [ "$FSTYP" = "xfs" ] && [ -b "$SCRATCH_RTDEV" ]; then
973 local rtdevsize=`blockdev --getsize64 $SCRATCH_RTDEV`
974 [ "$fssize" -gt "$rtdevsize" ] && _notrun "Scratch rt device too small"
975 rt_ops="-r size=$fssize"
980 # don't override MKFS_OPTIONS that set a block size.
981 echo $MKFS_OPTIONS |egrep -q "b?size="
982 if [ $? -eq 0 ]; then
983 _scratch_mkfs_xfs -d size=$fssize $rt_ops
985 _scratch_mkfs_xfs -d size=$fssize $rt_ops -b size=$blocksize
988 ext2|ext3|ext4|ext4dev)
989 ${MKFS_PROG}.$FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
992 # mkfs.gfs2 doesn't automatically shrink journal files on small
993 # filesystems, so the journal files may end up being bigger than the
994 # filesystem, which will cause mkfs.gfs2 to fail. Until that's fixed,
995 # shrink the journal size to at most one eigth of the filesystem and at
996 # least 8 MiB, the minimum size allowed.
997 local min_journal_size=8
998 local default_journal_size=128
999 if (( fssize/8 / (1024*1024) < default_journal_size )); then
1000 local journal_size=$(( fssize/8 / (1024*1024) ))
1001 (( journal_size >= min_journal_size )) || journal_size=$min_journal_size
1002 MKFS_OPTIONS="-J $journal_size $MKFS_OPTIONS"
1004 ${MKFS_PROG}.$FSTYP $MKFS_OPTIONS -O -b $blocksize $SCRATCH_DEV $blocks
1007 yes | ${MKFS_PROG}.$FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
1010 $MKFS_UDF_PROG $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
1014 # minimum size that's needed without the mixed option.
1015 # Ref: btrfs-prog: btrfs_min_dev_size()
1016 # Non mixed mode is also the default option.
1017 (( fssize < $((256 * 1024 *1024)) )) && mixed_opt='--mixed'
1018 $MKFS_BTRFS_PROG $MKFS_OPTIONS $mixed_opt -b $fssize $SCRATCH_DEV
1021 ${MKFS_PROG}.$FSTYP $MKFS_OPTIONS $SCRATCH_DEV $blocks
1024 ${MKFS_PROG}.$FSTYP $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
1027 # mkfs.resier4 requires size in KB as input for creating filesystem
1028 $MKFS_REISER4_PROG $MKFS_OPTIONS -y -b $blocksize $SCRATCH_DEV \
1029 `expr $fssize / 1024`
1032 # mkfs.f2fs requires # of sectors as an input for the size
1033 local sector_size=`blockdev --getss $SCRATCH_DEV`
1034 $MKFS_F2FS_PROG $MKFS_OPTIONS $SCRATCH_DEV `expr $fssize / $sector_size`
1037 local free_mem=`_free_memory_bytes`
1038 if [ "$free_mem" -lt "$fssize" ] ; then
1039 _notrun "Not enough memory ($free_mem) for tmpfs with $fssize bytes"
1041 export MOUNT_OPTIONS="-o size=$fssize $TMPFS_MOUNT_OPTIONS"
1044 _notrun "Filesystem $FSTYP not supported in _scratch_mkfs_sized"
1049 # Emulate an N-data-disk stripe w/ various stripe units
1050 # _scratch_mkfs_geom <sunit bytes> <swidth multiplier> [optional blocksize]
1051 _scratch_mkfs_geom()
1053 local sunit_bytes=$1
1054 local swidth_mult=$2
1056 [ -z "$blocksize" ] && blocksize=4096
1058 local sunit_blocks=$(( sunit_bytes / blocksize ))
1059 local swidth_blocks=$(( sunit_blocks * swidth_mult ))
1063 if echo "$MKFS_OPTIONS" | egrep -q "b?size="; then
1064 MKFS_OPTIONS=$(echo "$MKFS_OPTIONS" | sed -r "s/(b?size=)[0-9]+/\1$blocksize/")
1066 MKFS_OPTIONS+=" -b size=$blocksize"
1069 if echo "$MKFS_OPTIONS" | egrep -q "(su|sunit|sw|swidth)="; then
1070 MKFS_OPTIONS=$(echo "$MKFS_OPTIONS" | sed -r \
1071 -e "s/(su|sunit)=[0-9kmg]+/su=$sunit_bytes/" \
1072 -e "s/(sw|swidth)=[0-9kmg]+/sw=$swidth_mult/")
1074 MKFS_OPTIONS+=" -d su=$sunit_bytes,sw=$swidth_mult"
1078 MKFS_OPTIONS+=" -b $blocksize -E stride=$sunit_blocks,stripe_width=$swidth_blocks"
1081 _notrun "can't mkfs $FSTYP with geometry"
1087 # Create fs of certain blocksize on scratch device
1088 # _scratch_mkfs_blocksized blocksize
1089 _scratch_mkfs_blocksized()
1094 if ! [[ $blocksize =~ $re ]] ; then
1095 _notrun "error: _scratch_mkfs_sized: block size \"$blocksize\" not an integer."
1100 _scratch_mkfs_xfs $MKFS_OPTIONS -b size=$blocksize
1103 ${MKFS_PROG}.$FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV
1106 ${MKFS_PROG}.$FSTYP $MKFS_OPTIONS -O -b $blocksize $SCRATCH_DEV
1109 yes | ${MKFS_PROG}.$FSTYP -F $MKFS_OPTIONS -b $blocksize -C $blocksize $SCRATCH_DEV
1112 _notrun "Filesystem $FSTYP not supported in _scratch_mkfs_blocksized"
1121 xfs_io -x -c "resblks $1" $SCRATCH_MNT
1129 # Repair scratch filesystem. Returns 0 if the FS is good to go (either no
1130 # errors found or errors were fixed) and nonzero otherwise; also spits out
1131 # a complaint on stderr if fsck didn't tell us that the FS is good to go.
1132 _repair_scratch_fs()
1136 _scratch_xfs_repair "$@" 2>&1
1138 if [ "$res" -ne 0 ]; then
1139 echo "xfs_repair returns $res; replay log?"
1142 if [ "$res" -gt 0 ]; then
1143 echo "mount returns $res; zap log?"
1144 _scratch_xfs_repair -L 2>&1
1145 echo "log zap returns $?"
1147 umount "$SCRATCH_MNT"
1149 _scratch_xfs_repair "$@" 2>&1
1152 if [ $res -ne 0 ]; then
1153 _dump_err2 "xfs_repair failed, err=$res"
1158 local dev=$SCRATCH_DEV
1160 if [ $FSTYP = "overlay" -a -n "$OVL_BASE_SCRATCH_DEV" ]; then
1161 _repair_overlay_scratch_fs
1162 # Fall through to repair base fs
1163 dev=$OVL_BASE_SCRATCH_DEV
1164 fstyp=$OVL_BASE_FSTYP
1165 $UMOUNT_PROG $OVL_BASE_SCRATCH_MNT
1167 # Let's hope fsck -y suffices...
1168 fsck -t $fstyp -y $dev 2>&1
1171 $FSCK_OK|$FSCK_NONDESTRUCT|$FSCK_REBOOT)
1175 _dump_err2 "fsck.$FSTYP failed, err=$res"
1187 echo "Usage: _get_pids_by_name process-name" 1>&2
1191 # Algorithm ... all ps(1) variants have a time of the form MM:SS or
1192 # HH:MM:SS before the psargs field, use this as the search anchor.
1194 # Matches with $1 (process-name) occur if the first psarg is $1
1195 # or ends in /$1 ... the matching uses sed's regular expressions,
1196 # so passing a regex into $1 will work.
1201 -e 's/[ ][ ]*/ /g' \
1204 -e "/[0-9]:[0-9][0-9] *[^ ]*\/$1 /s/ .*//p" \
1205 -e "/[0-9]:[0-9][0-9] *$1 /s/ .*//p"
1209 # _df_device : get an IRIX style df line for a given device
1211 # - returns "" if not mounted
1212 # - returns fs type in field two (ala IRIX)
1213 # - joins line together if split by fancy df formatting
1214 # - strips header etc
1221 echo "Usage: _df_device device" 1>&2
1225 # Note that we use "==" here so awk doesn't try to interpret an NFS over
1226 # IPv6 server as a regular expression.
1227 $DF_PROG 2>/dev/null | $AWK_PROG -v what=$1 '
1228 ($1==what) && (NF==1) {
1242 # _df_dir : get an IRIX style df line for device where a directory resides
1244 # - returns fs type in field two (ala IRIX)
1245 # - joins line together if split by fancy df formatting
1246 # - strips header etc
1253 echo "Usage: _df_dir device" 1>&2
1257 $DF_PROG $1 2>/dev/null | $AWK_PROG -v what=$1 '
1273 # return percentage used disk space for mounted device
1279 echo "Usage: _used device" 1>&2
1283 _df_device $1 | $AWK_PROG '{ sub("%", "") ; print $6 }'
1286 # return the FS type of a mounted device
1292 echo "Usage: _fs_type device" 1>&2
1297 # The Linux kernel shows NFSv4 filesystems in df output as
1298 # filesystem type nfs4, although we mounted it as nfs earlier.
1299 # Fix the filesystem type up here so that the callers don't
1300 # have to bother with this quirk.
1302 _df_device $1 | $AWK_PROG '{ print $2 }' | \
1303 sed -e 's/nfs4/nfs/' -e 's/fuse.glusterfs/glusterfs/'
1306 # return the FS mount options of a mounted device
1308 # should write a version which just parses the output of mount for IRIX
1309 # compatibility, but since this isn't used at all, at the moment I'll leave
1316 echo "Usage: _fs_options device" 1>&2
1320 $AWK_PROG -v dev=$1 '
1321 match($1,dev) { print $4 }
1325 # returns device number if a file is a block device
1331 echo "Usage: _is_block_dev dev" 1>&2
1336 if [ -L "$dev" ]; then
1337 dev=`readlink -f "$dev"`
1340 if [ -b "$dev" ]; then
1341 $here/src/lstat64 "$dev" | $AWK_PROG '/Device type:/ { print $9 }'
1345 # returns device number if a file is a character device
1349 if [ $# -ne 1 ]; then
1350 echo "Usage: _is_char_dev dev" 1>&2
1355 if [ -L "$dev" ]; then
1356 dev=`readlink -f "$dev"`
1359 if [ -c "$dev" ]; then
1360 $here/src/lstat64 "$dev" | $AWK_PROG '/Device type:/ { print $9 }'
1364 # Do a command, log it to $seqres.full, optionally test return status
1365 # and die if command fails. If called with one argument _do executes the
1366 # command, logs it, and returns its exit status. With two arguments _do
1367 # first prints the message passed in the first argument, and then "done"
1368 # or "fail" depending on the return status of the command passed in the
1369 # second argument. If the command fails and the variable _do_die_on_error
1370 # is set to "always" or the two argument form is used and _do_die_on_error
1371 # is set to "message_only" _do will print an error message to
1372 # $seqres.out and exit.
1376 if [ $# -eq 1 ]; then
1378 elif [ $# -eq 2 ]; then
1383 echo "Usage: _do [note] cmd" 1>&2
1387 (eval "echo '---' \"$cmd\"") >>$seqres.full
1388 (eval "$cmd") >$tmp._out 2>&1
1390 cat $tmp._out >>$seqres.full
1392 if [ $# -eq 2 ]; then
1393 if [ $ret -eq 0 ]; then
1400 && [ "$_do_die_on_error" = "always" \
1401 -o \( $# -eq 2 -a "$_do_die_on_error" = "message_only" \) ]
1403 [ $# -ne 2 ] && echo
1404 eval "echo \"$cmd\" failed \(returned $ret\): see $seqres.full"
1411 # bail out, setting up .notrun file. Need to kill the filesystem check files
1412 # here, otherwise they are set incorrectly for the next test.
1416 echo "$*" > $seqres.notrun
1417 echo "$seq not run: $*"
1418 rm -f ${RESULT_DIR}/require_test*
1419 rm -f ${RESULT_DIR}/require_scratch*
1425 # just plain bail out
1429 echo "$*" | tee -a $seqres.full
1430 echo "(see $seqres.full for details)"
1435 # tests whether $FSTYP is one of the supported filesystems for a test
1443 if [ "$f" = "$FSTYP" -o "$f" = "generic" ]
1449 _notrun "not suitable for this filesystem type: $FSTYP"
1452 # check if a FS on a device is mounted
1453 # if so, verify that it is mounted on mount point
1454 # if fstype is given as argument, verify that it is also
1455 # mounted with correct fs type
1465 # find $dev as the source, and print result in "$dev $mnt" format
1466 local mount_rec=`findmnt -rncv -S $dev -o SOURCE,TARGET`
1467 [ -n "$mount_rec" ] || return 1 # 1 = not mounted
1469 # if it's mounted, make sure its on $mnt
1470 if [ "$mount_rec" != "$dev $mnt" ]; then
1471 echo "$devname=$dev is mounted but not on $mntname=$mnt - aborting"
1472 echo "Already mounted result:"
1474 return 2 # 2 = mounted on wrong mnt
1477 if [ -n "$type" -a "`_fs_type $dev`" != "$type" ]; then
1478 echo "$devname=$dev is mounted but not a type $type filesystem"
1479 # raw $DF_PROG cannot handle NFS/CIFS/overlay correctly
1481 return 3 # 3 = mounted as wrong type
1483 return 0 # 0 = mounted as expected
1486 # this test needs a scratch partition - check we're ok & unmount it
1487 # No post-test check of the device is required. e.g. the test intentionally
1488 # finishes the test with the filesystem in a corrupt state
1489 _require_scratch_nocheck()
1493 echo $SCRATCH_DEV | egrep -q ":/?" > /dev/null 2>&1
1494 if [ -z "$SCRATCH_DEV" -o "$?" != "0" ]; then
1495 _notrun "this test requires a valid \$SCRATCH_DEV"
1497 if [ ! -d "$SCRATCH_MNT" ]; then
1498 _notrun "this test requires a valid \$SCRATCH_MNT"
1502 if [ -z "$SCRATCH_DEV" ]; then
1503 _notrun "this test requires a valid \$SCRATCH_DEV"
1505 if [ ! -d "$SCRATCH_MNT" ]; then
1506 _notrun "this test requires a valid \$SCRATCH_MNT"
1510 echo $SCRATCH_DEV | grep -q ":/" > /dev/null 2>&1
1511 if [ -z "$SCRATCH_DEV" -o "$?" != "0" ]; then
1512 _notrun "this test requires a valid \$SCRATCH_DEV"
1514 if [ ! -d "$SCRATCH_MNT" ]; then
1515 _notrun "this test requires a valid \$SCRATCH_MNT"
1519 echo $SCRATCH_DEV | grep -q "://" > /dev/null 2>&1
1520 if [ -z "$SCRATCH_DEV" -o "$?" != "0" ]; then
1521 _notrun "this test requires a valid \$SCRATCH_DEV"
1523 if [ ! -d "$SCRATCH_MNT" ]; then
1524 _notrun "this test requires a valid \$SCRATCH_MNT"
1528 echo $SCRATCH_DEV | grep -q "//" > /dev/null 2>&1
1529 if [ -z "$SCRATCH_DEV" -o "$?" != "0" ]; then
1530 _notrun "this test requires a valid \$SCRATCH_DEV"
1532 if [ ! -d "$SCRATCH_MNT" ]; then
1533 _notrun "this test requires a valid \$SCRATCH_MNT"
1537 if [ -z "$OVL_BASE_SCRATCH_MNT" -o ! -d "$OVL_BASE_SCRATCH_MNT" ]; then
1538 _notrun "this test requires a valid \$OVL_BASE_SCRATCH_MNT as ovl base dir"
1540 # if $SCRATCH_MNT is derived from $OVL_BASE_SCRATCH_MNT then
1541 # don't check $SCRATCH_MNT dir here because base fs may not be mounted
1542 # and we will create the mount point anyway on _overlay_mount
1543 if [ "$SCRATCH_MNT" != "$OVL_BASE_SCRATCH_MNT/$OVL_MNT" -a ! -d "$SCRATCH_MNT" ]; then
1544 _notrun "this test requires a valid \$SCRATCH_MNT"
1548 if [ -z "$SCRATCH_DEV" -o ! -d "$SCRATCH_MNT" ];
1550 _notrun "this test requires a valid \$SCRATCH_MNT and unique $SCRATCH_DEV"
1554 # ubifs needs an UBI volume. This will be a char device, not a block device.
1555 if [ ! -c "$SCRATCH_DEV" ]; then
1556 _notrun "this test requires a valid UBI volume for \$SCRATCH_DEV"
1558 if [ ! -d "$SCRATCH_MNT" ]; then
1559 _notrun "this test requires a valid \$SCRATCH_MNT"
1563 if [ -z "$SCRATCH_DEV" -o "`_is_block_dev "$SCRATCH_DEV"`" = "" ]
1565 _notrun "this test requires a valid \$SCRATCH_DEV"
1567 if [ "`_is_block_dev "$SCRATCH_DEV"`" = "`_is_block_dev "$TEST_DEV"`" ]
1569 _notrun "this test requires a valid \$SCRATCH_DEV"
1571 if [ ! -d "$SCRATCH_MNT" ]
1573 _notrun "this test requires a valid \$SCRATCH_MNT"
1578 _check_mounted_on SCRATCH_DEV $SCRATCH_DEV SCRATCH_MNT $SCRATCH_MNT
1580 [ $err -le 1 ] || exit 1
1583 # if it's mounted, unmount it
1584 if ! _scratch_unmount
1586 echo "failed to unmount $SCRATCH_DEV"
1590 rm -f ${RESULT_DIR}/require_scratch
1593 # we need the scratch device and it should be checked post test.
1596 _require_scratch_nocheck
1597 touch ${RESULT_DIR}/require_scratch
1600 # require a scratch dev of a minimum size (in kb)
1601 _require_scratch_size()
1603 [ $# -eq 1 ] || _fail "_require_scratch_size: expected size param"
1606 local devsize=`_get_device_size $SCRATCH_DEV`
1607 [ $devsize -lt $1 ] && _notrun "scratch dev too small"
1611 # this test needs a test partition - check we're ok & mount it
1617 echo $TEST_DEV | egrep -q ":/?" > /dev/null 2>&1
1618 if [ -z "$TEST_DEV" -o "$?" != "0" ]; then
1619 _notrun "this test requires a valid \$TEST_DEV"
1621 if [ ! -d "$TEST_DIR" ]; then
1622 _notrun "this test requires a valid \$TEST_DIR"
1626 if [ -z "$TEST_DEV" ]; then
1627 _notrun "this test requires a valid \$TEST_DEV"
1629 if [ ! -d "$TEST_DIR" ]; then
1630 _notrun "this test requires a valid \$TEST_DIR"
1634 echo $TEST_DEV | grep -q ":/" > /dev/null 2>&1
1635 if [ -z "$TEST_DEV" -o "$?" != "0" ]; then
1636 _notrun "this test requires a valid \$TEST_DEV"
1638 if [ ! -d "$TEST_DIR" ]; then
1639 _notrun "this test requires a valid \$TEST_DIR"
1643 echo $TEST_DEV | grep -q "//" > /dev/null 2>&1
1644 if [ -z "$TEST_DEV" -o "$?" != "0" ]; then
1645 _notrun "this test requires a valid \$TEST_DEV"
1647 if [ ! -d "$TEST_DIR" ]; then
1648 _notrun "this test requires a valid \$TEST_DIR"
1652 echo $TEST_DEV | grep -q "://" > /dev/null 2>&1
1653 if [ -z "$TEST_DEV" -o "$?" != "0" ]; then
1654 _notrun "this test requires a valid \$TEST_DIR"
1656 if [ ! -d "$TEST_DIR" ]; then
1657 _notrun "this test requires a valid \$TEST_DIR"
1661 if [ -z "$OVL_BASE_TEST_DIR" -o ! -d "$OVL_BASE_TEST_DIR" ]; then
1662 _notrun "this test requires a valid \$TEST_DIR as ovl base dir"
1664 if [ ! -d "$TEST_DIR" ]; then
1665 _notrun "this test requires a valid \$TEST_DIR"
1669 if [ -z "$TEST_DEV" -o ! -d "$TEST_DIR" ];
1671 _notrun "this test requires a valid \$TEST_DIR and unique $TEST_DEV"
1675 # ubifs needs an UBI volume. This will be a char device, not a block device.
1676 if [ ! -c "$TEST_DEV" ]; then
1677 _notrun "this test requires a valid UBI volume for \$TEST_DEV"
1679 if [ ! -d "$TEST_DIR" ]; then
1680 _notrun "this test requires a valid \$TEST_DIR"
1684 if [ -z "$TEST_DEV" ] || [ "`_is_block_dev "$TEST_DEV"`" = "" ]
1686 _notrun "this test requires a valid \$TEST_DEV"
1688 if [ "`_is_block_dev "$SCRATCH_DEV"`" = "`_is_block_dev "$TEST_DEV"`" ]
1690 _notrun "this test requires a valid \$TEST_DEV"
1692 if [ ! -d "$TEST_DIR" ]
1694 _notrun "this test requires a valid \$TEST_DIR"
1699 _check_mounted_on TEST_DEV $TEST_DEV TEST_DIR $TEST_DIR
1701 [ $err -le 1 ] || exit 1
1706 echo "!!! failed to mount $TEST_DEV on $TEST_DIR"
1710 touch ${RESULT_DIR}/require_test
1716 [ -z "$SCRATCH_LOGDEV" -o ! -b "$SCRATCH_LOGDEV" ] && ret=1
1717 [ "$USE_EXTERNAL" != yes ] && ret=1
1722 # this test needs a logdev
1726 [ -z "$SCRATCH_LOGDEV" -o ! -b "$SCRATCH_LOGDEV" ] && \
1727 _notrun "This test requires a valid \$SCRATCH_LOGDEV"
1728 [ "$USE_EXTERNAL" != yes ] && \
1729 _notrun "This test requires USE_EXTERNAL to be enabled"
1731 # ensure its not mounted
1732 $UMOUNT_PROG $SCRATCH_LOGDEV 2>/dev/null
1735 # this test requires loopback device support
1739 modprobe loop >/dev/null 2>&1
1740 if grep loop /proc/devices >/dev/null 2>&1
1744 _notrun "This test requires loopback device support"
1748 # this test requires ext2 filesystem support
1752 modprobe ext2 >/dev/null 2>&1
1753 if grep ext2 /proc/filesystems >/dev/null 2>&1
1757 _notrun "This test requires ext2 filesystem support"
1761 # this test requires tmpfs filesystem support
1765 modprobe tmpfs >/dev/null 2>&1
1766 grep -q tmpfs /proc/filesystems ||
1767 _notrun "this test requires tmpfs support"
1770 # this test requires that (large) loopback device files are not in use
1772 _require_no_large_scratch_dev()
1774 [ "$LARGE_SCRATCH_DEV" = yes ] && \
1775 _notrun "Large filesystem testing in progress, skipped this test"
1778 # this test requires that a realtime subvolume is in use, and
1779 # that the kernel supports realtime as well.
1783 [ "$USE_EXTERNAL" = yes ] || \
1784 _notrun "External volumes not in use, skipped this test"
1785 [ "$SCRATCH_RTDEV" = "" ] && \
1786 _notrun "Realtime device required, skipped this test"
1789 # This test requires that a realtime subvolume is not in use
1791 _require_no_realtime()
1793 [ "$USE_EXTERNAL" = "yes" ] && [ -n "$SCRATCH_RTDEV" ] && \
1794 _notrun "Test not compatible with realtime subvolumes, skipped this test"
1797 # this test requires that a specified command (executable) exists
1798 # $1 - command, $2 - name for error message
1800 # Note: the command string might have parameters, so strip them before checking
1801 # whether it is executable.
1804 if [ $# -eq 2 ]; then
1806 elif [ $# -eq 1 ]; then
1809 _fail "usage: _require_command <command> [<name>]"
1812 local command=`echo "$1" | awk '{ print $1 }'`
1813 if [ ! -x "$command" ]; then
1814 _notrun "$name utility required, skipped this test"
1818 # this test requires the device to be valid block device
1820 _require_block_device()
1822 if [ -z "$1" ]; then
1823 echo "Usage: _require_block_device <dev>" 1>&2
1826 if [ "`_is_block_dev "$1"`" == "" ]; then
1827 _notrun "require $1 to be valid block disk"
1831 # this test requires a path to refere to a local block or character device
1833 _require_local_device()
1835 if [ -z "$1" ]; then
1836 echo "Usage: _require_local_device <dev>" 1>&2
1839 if [ "`_is_block_dev "$1"`" != "" ]; then
1842 if [ "`_is_char_dev "$1"`" != "" ]; then
1845 _notrun "require $1 to be local device"
1848 # brd based ram disks erase the device when they receive a flush command when no
1849 # active references are present. This causes problems for DM devices sitting on
1850 # top of brd devices as DM doesn't hold active references to the brd device.
1851 _require_sane_bdev_flush()
1853 echo $1 | grep -q "^/dev/ram[0-9]\+$"
1854 if [ $? -eq 0 ]; then
1855 _notrun "This test requires a sane block device flush"
1859 # this test requires a specific device mapper target
1860 _require_dm_target()
1864 # require SCRATCH_DEV to be a valid block device with sane BLKFLSBUF
1866 _require_block_device $SCRATCH_DEV
1867 _require_sane_bdev_flush $SCRATCH_DEV
1868 _require_command "$DMSETUP_PROG" dmsetup
1870 _normalize_mount_options | egrep -q "dax(=always| |$)"
1871 if [ $? -eq 0 ]; then
1873 stripe|linear|log-writes)
1876 _notrun "Cannot run tests with DAX on $target devices."
1881 modprobe dm-$target >/dev/null 2>&1
1883 $DMSETUP_PROG targets 2>&1 | grep -q ^$target
1884 if [ $? -ne 0 ]; then
1885 _notrun "This test requires dm $target support"
1889 # this test requires the ext4 kernel support crc feature on scratch device
1891 _require_scratch_ext4_crc()
1893 _scratch_mkfs_ext4 >/dev/null 2>&1
1894 dumpe2fs -h $SCRATCH_DEV 2> /dev/null | grep -q metadata_csum || _notrun "metadata_csum not supported by this filesystem"
1895 _try_scratch_mount >/dev/null 2>&1 \
1896 || _notrun "Kernel doesn't support metadata_csum feature"
1900 # Check whether the specified feature whether it is supported by
1901 # mkfs.ext4 and the kernel.
1902 _require_scratch_ext4_feature()
1904 if [ -z "$1" ]; then
1905 echo "Usage: _require_scratch_ext4_feature feature"
1908 $MKFS_EXT4_PROG -F $MKFS_OPTIONS -O "$1" \
1909 $SCRATCH_DEV 512m >/dev/null 2>&1 \
1910 || _notrun "mkfs.ext4 doesn't support $1 feature"
1911 _try_scratch_mount >/dev/null 2>&1 \
1912 || _notrun "Kernel doesn't support the ext4 feature(s): $1"
1916 # this test requires that external log/realtime devices are not in use
1918 _require_nonexternal()
1920 [ "$USE_EXTERNAL" = yes ] && \
1921 _notrun "External device testing in progress, skipped this test"
1924 # this test requires that the kernel supports asynchronous I/O
1927 $here/src/feature -A
1932 _notrun "kernel does not support asynchronous I/O"
1935 _fail "unexpected error testing for asynchronous I/O support"
1940 # this test requires that a (specified) aio-dio executable exists
1941 # and that the kernel supports asynchronous I/O.
1942 # $1 - command (optional)
1948 AIO_TEST=$here/src/aio-dio-regress/aiodio_sparse2
1949 [ -x $AIO_TEST ] || _notrun "aio-dio utilities required"
1951 AIO_TEST=$here/src/aio-dio-regress/$1
1952 [ -x $AIO_TEST ] || _notrun "$AIO_TEST not built"
1958 # this test requires that a test program exists under src/
1959 # $1 - command (require)
1961 _require_test_program()
1963 local prog=$here/src/$1
1964 [ -x $prog ] || _notrun "$prog not built"
1967 # run an aio-dio program
1973 echo "usage: _run_aiodio command_name" 2>&1
1979 local testtemp=$TEST_DIR/aio-testfile
1981 $AIO_TEST $testtemp 2>&1
1988 _require_timestamp_range()
1990 local device=${1:-$TEST_DEV}
1993 read tsmin tsmax <<<$(_filesystem_timestamp_range $device)
1994 if [ $tsmin -eq -1 -a $tsmax -eq -1 ]; then
1995 _notrun "filesystem $FSTYP timestamp bounds are unknown"
1998 # expect console warning from rw scratch mount if fs limit is near
1999 if [ $tsmax -le $((1<<31)) ] && \
2000 ! _check_dmesg_for "filesystem being mounted at .* supports timestamps until"
2002 _notrun "Kernel does not support timestamp limits"
2006 _filesystem_timestamp_range()
2008 local device=${1:-$TEST_DEV}
2009 local fstyp=${2:-$FSTYP}
2010 u32max=$(((1<<32)-1))
2012 s32max=$(((1<<31)-1))
2013 s64max=$(((1<<63)-1))
2018 echo "$s32min $s32max"
2021 if [ $(dumpe2fs -h $device 2>/dev/null | grep "Inode size:" | cut -d: -f2) -gt 128 ]; then
2022 printf "%d %d\n" $s32min 0x37fffffff
2024 echo "$s32min $s32max"
2032 echo "$s32min $s32max"
2035 echo "$s64min $s64max"
2038 if [ ! -z $OVL_BASE_FSTYP -a $OVL_BASE_FSTYP != "overlay" ]; then
2039 _filesystem_timestamp_range $OVL_BASE_TEST_DEV $OVL_BASE_FSTYP
2050 # indicate whether YP/NIS is active or not
2055 dn=$(domainname 2>/dev/null)
2056 local ypcat=$(type -P ypcat)
2057 local rpcinfo=$(type -P rpcinfo)
2058 test -n "${dn}" -a "${dn}" != "(none)" -a "${dn}" != "localdomain" -a -n "${ypcat}" -a -n "${rpcinfo}" && \
2059 "${rpcinfo}" -p localhost 2>/dev/null | grep -q ypbind
2063 # cat the password file
2067 [ $(_yp_active) -eq 0 ] && ypcat passwd
2071 # cat the group file
2075 [ $(_yp_active) -eq 0 ] && ypcat group
2079 # check for a user on the machine, fsgqa as default
2087 _cat_passwd | grep -q $qa_user
2088 [ "$?" == "0" ] || _notrun "$qa_user user not defined."
2089 echo /bin/true | su $qa_user
2090 [ "$?" == "0" ] || _notrun "$qa_user cannot execute commands."
2093 # check for a group on the machine, fsgqa as default
2101 _cat_group | grep -q $qa_group
2102 [ "$?" == "0" ] || _notrun "$qa_group group not defined."
2108 s,.*Permission\sdenied.*,Permission denied,;
2109 s,.*no\saccess\sto\stty.*,,;
2110 s,.*no\sjob\scontrol\sin\sthis\sshell.*,,;
2117 echo $1 | su -s /bin/bash $qa_user 2>&1 | _filter_user_do
2120 _require_xfs_io_command()
2124 echo "Usage: _require_xfs_io_command command [switch]" 1>&2
2130 local param_checked=""
2134 local testfile=$TEST_DIR/$$.xfs_io
2138 # Test xfs_io lsattr support and filesystem FS_IOC_FSSETXATTR
2140 testio=`$XFS_IO_PROG -F -f -c "lsattr $param" $testfile 2>&1`
2141 param_checked="$param"
2144 local testdir=$TEST_DIR/$$.attr_dir
2145 mkdir $TEST_DIR/$$.attr_dir
2146 if [ -z "$param" ]; then
2149 # Test xfs_io chattr support AND
2150 # filesystem FS_IOC_FSSETXATTR support
2151 # 'tPnE' flags are only valid for a directory so check them on a directory.
2152 if echo "$param" | egrep -q 't|P|n|E'; then
2153 testio=`$XFS_IO_PROG -F -c "chattr +$param" $testdir 2>&1`
2154 attr_info=`$XFS_IO_PROG -F -r -c "lsattr" $testdir | awk '{print $1}'`
2155 $XFS_IO_PROG -F -r -c "chattr -$param" $testdir 2>&1
2157 testio=`$XFS_IO_PROG -F -f -c "chattr +$param" $testfile 2>&1`
2158 attr_info=`$XFS_IO_PROG -F -r -c "lsattr" $testfile | awk '{print $1}'`
2159 $XFS_IO_PROG -F -r -c "chattr -$param" $testfile 2>&1
2161 param_checked="+$param"
2162 rm -rf $testdir 2>&1 > /dev/null
2165 testio=`$XFS_IO_PROG -F -f -c "chproj 0" $testfile 2>&1`
2168 local testcopy=$TEST_DIR/$$.copy.xfs_io
2169 local copy_opts=$testfile
2170 if [ "$param" == "-f" ]; then
2171 # source file is the open destination file
2173 copy_opts="0 -d 4k -l 4k"
2175 $XFS_IO_PROG -F -f -c "pwrite 0 4k" $testfile > /dev/null 2>&1
2176 testio=`$XFS_IO_PROG -F -f -c "copy_range $param $copy_opts" $testcopy 2>&1`
2177 rm -f $testcopy > /dev/null 2>&1
2178 param_checked="$param"
2181 testio=`$XFS_IO_PROG -F -f -c "falloc $param 0 1m" $testfile 2>&1`
2182 param_checked="$param"
2184 "fpunch" | "fcollapse" | "zero" | "fzero" | "finsert" | "funshare")
2185 local blocksize=$(_get_block_size $TEST_DIR)
2186 testio=`$XFS_IO_PROG -F -f -c "pwrite 0 $((5 * $blocksize))" \
2187 -c "fsync" -c "$command $blocksize $((2 * $blocksize))" \
2191 # If 'ranged' is passed as argument then we check to see if fiemap supports
2192 # ranged query params
2193 if echo "$param" | grep -q "ranged"; then
2194 param=$(echo "$param" | sed "s/ranged//")
2195 $XFS_IO_PROG -c "help fiemap" | grep -q "\[offset \[len\]\]"
2196 [ $? -eq 0 ] || _notrun "xfs_io $command ranged support is missing"
2198 testio=`$XFS_IO_PROG -F -f -c "pwrite 0 20k" -c "fsync" \
2199 -c "fiemap -v $param" $testfile 2>&1`
2200 param_checked="$param"
2203 local testlink=$TEST_DIR/$$.link.xfs_io
2204 testio=`$XFS_IO_PROG -F -f -c "flink $testlink" $testfile 2>&1`
2205 rm -f $testlink > /dev/null 2>&1
2208 # Check O_TMPFILE support in xfs_io, kernel and fs
2209 testio=`$XFS_IO_PROG -T -c quit $TEST_DIR 2>&1`
2210 echo $testio | egrep -q "invalid option|Is a directory" && \
2211 _notrun "xfs_io $command support is missing"
2212 echo $testio | grep -q "Operation not supported" && \
2213 _notrun "O_TMPFILE is not supported"
2216 testio=`$XFS_IO_PROG -f -c "fsmap" $testfile 2>&1`
2217 echo $testio | grep -q "Inappropriate ioctl" && \
2218 _notrun "xfs_io $command support is missing"
2221 testio=`$XFS_IO_PROG -c "label" $TEST_DIR 2>&1`
2224 # -c "open $f" is broken in xfs_io <= 4.8. Along with the fix,
2225 # a new -C flag was introduced to execute one shot commands.
2226 # Check for -C flag support as an indication for the bug fix.
2227 testio=`$XFS_IO_PROG -F -f -C "open $testfile" $testfile 2>&1`
2228 echo $testio | grep -q "invalid option" && \
2229 _notrun "xfs_io $command support is missing"
2232 # -N (RWF_NOWAIT) only works with direct vectored I/O writes
2233 local pwrite_opts=" "
2234 if [ "$param" == "-N" ]; then
2236 pwrite_opts+="-V 1 -b 4k"
2238 testio=`$XFS_IO_PROG -f $opts -c \
2239 "pwrite $pwrite_opts $param 0 4k" $testfile 2>&1`
2240 param_checked="$pwrite_opts $param"
2243 testio=`$XFS_IO_PROG -x -c "$command probe" $TEST_DIR 2>&1`
2244 echo $testio | grep -q "Inappropriate ioctl" && \
2245 _notrun "xfs_io $command support is missing"
2248 testio=`$XFS_IO_PROG -f -c "utimes 0 0 0 0" $testfile 2>&1`
2252 testio=`$XFS_IO_PROG -c "syncfs" $testfile 2>&1`
2255 testio=`$XFS_IO_PROG -c "help $command" 2>&1`
2258 rm -f $testfile 2>&1 > /dev/null
2259 echo $testio | grep -q "not found" && \
2260 _notrun "xfs_io $command $param_checked support is missing"
2261 echo $testio | grep -q "Operation not supported\|Inappropriate ioctl" && \
2262 _notrun "xfs_io $command $param_checked failed (old kernel/wrong fs?)"
2263 echo $testio | grep -q "Invalid" && \
2264 _notrun "xfs_io $command $param_checked failed (old kernel/wrong fs/bad args?)"
2265 echo $testio | grep -q "foreign file active" && \
2266 _notrun "xfs_io $command $param_checked not supported on $FSTYP"
2267 echo $testio | grep -q "Function not implemented" && \
2268 _notrun "xfs_io $command $param_checked support is missing (missing syscall?)"
2269 echo $testio | grep -q "unknown flag" && \
2270 _notrun "xfs_io $command $param_checked support is missing (unknown flag)"
2272 [ -n "$param" ] || return
2274 if [ -z "$param_checked" ]; then
2275 $XFS_IO_PROG -c "help $command" | grep -E -q "^ $param ([a-zA-Z_]+ )?--" || \
2276 _notrun "xfs_io $command doesn't support $param"
2278 # xfs_io could result in "command %c not supported" if it was
2279 # built on kernels not supporting pwritev2() calls
2280 echo $testio | grep -q "\(invalid option\|not supported\)" && \
2281 _notrun "xfs_io $command doesn't support $param"
2284 # On XFS, ioctl(FSSETXATTR)(called by xfs_io -c "chattr") maskes off unsupported
2285 # or invalid flags silently so need to check these flags by extra ioctl(FSGETXATTR)
2286 # (called by xfs_io -c "lsattr").
2287 # The following URL explains why we don't change the behavior of XFS.
2288 # https://www.spinics.net/lists/linux-xfs/msg44725.html
2289 if [ -n "$attr_info" -a "$FSTYP" = "xfs" ]; then
2291 for i in $(seq 0 $((num-1))); do
2292 echo $attr_info | grep -q "${param:$i:1}" || \
2293 _notrun "xfs_io $command +${param:$i:1} support is missing (unknown flag in kernel)"
2298 # check that kernel and filesystem support direct I/O
2301 if [ $FSTYP = "ext4" ] || [ $FSTYP = "f2fs" ] ; then
2302 if echo "$MOUNT_OPTIONS" | grep -q "test_dummy_encryption"; then
2303 _notrun "$FSTYP encryption doesn't support O_DIRECT"
2306 if [ $FSTYP = "ext4" ] ; then
2307 if echo "$MOUNT_OPTIONS" | grep -q "data=journal"; then
2308 _notrun "ext4 data journaling doesn't support O_DIRECT"
2311 local testfile=$TEST_DIR/$$.direct
2312 $XFS_IO_PROG -F -f -d -c "pwrite 0 20k" $testfile > /dev/null 2>&1
2313 if [ $? -ne 0 ]; then
2314 _notrun "O_DIRECT is not supported"
2316 rm -f $testfile 2>&1 > /dev/null
2319 _format_swapfile() {
2326 # Swap files must be nocow on Btrfs.
2327 $CHATTR_PROG +C "$fname" > /dev/null 2>&1
2328 _pwrite_byte 0x61 0 "$sz" "$fname" >> $seqres.full
2329 $MKSWAP_PROG "$fname" >> $seqres.full
2332 # Check that the filesystem supports swapfiles
2333 _require_scratch_swapfile()
2336 _require_command "$MKSWAP_PROG" "mkswap"
2338 _scratch_mkfs >/dev/null 2>&1
2340 # With mounting SELinux context(e.g. system_u:object_r:root_t:s0),
2341 # standard mkswap tried to reset the type of default context to
2342 # swapfile_t if it's not swapfile_t, and then it failed and returned
2343 # ENOTSUP expectedly as we don't want to create any SELinux attr on
2344 # purpose. standard mkswap ignored this relabel error by commit
2345 # d97dc0e of util-linux, but it still reported the error before
2346 # commit d97dc0e. We mount swapfile context directly to skip the
2348 [ -n "$SELINUX_MOUNT_OPTIONS" ] && export \
2349 SELINUX_MOUNT_OPTIONS="-o context=system_u:object_r:swapfile_t:s0"
2353 # Minimum size for mkswap is 10 pages
2354 _format_swapfile "$SCRATCH_MNT/swap" $(($(get_page_size) * 10))
2356 if ! swapon "$SCRATCH_MNT/swap" >/dev/null 2>&1; then
2358 _notrun "swapfiles are not supported"
2361 swapoff "$SCRATCH_MNT/swap" >/dev/null 2>&1
2365 # Check that a fs has enough free space (in 1024b blocks)
2370 local blocks=$2 # in units of 1024
2371 local gb=$(( blocks / 1024 / 1024 ))
2373 local free_blocks=`df -kP $mnt | grep -v Filesystem | awk '{print $4}'`
2374 [ $free_blocks -lt $blocks ] && \
2375 _notrun "This test requires at least ${gb}GB free on $mnt to run"
2379 # Check if the filesystem supports sparse files.
2381 # Unfortunately there is no better way to do this than a manual black list.
2383 _require_sparse_files()
2387 _notrun "Sparse files not supported by this filesystem type: $FSTYP"
2396 #boot_params always present in debugfs
2397 [ -d "$DEBUGFS_MNT/boot_params" ] || _notrun "Debugfs not mounted"
2400 _require_fail_make_request()
2402 [ -f "$DEBUGFS_MNT/fail_make_request/probability" ] \
2403 || _notrun "$DEBUGFS_MNT/fail_make_request \
2404 not found. Seems that CONFIG_FAULT_INJECTION_DEBUG_FS kernel config option not enabled"
2407 # Disable extent zeroing for ext4 on the given device
2408 _ext4_disable_extent_zeroout()
2410 local dev=${1:-$TEST_DEV}
2411 local sdev=`_short_dev $dev`
2413 [ -f /sys/fs/ext4/$sdev/extent_max_zeroout_kb ] && \
2414 echo 0 >/sys/fs/ext4/$sdev/extent_max_zeroout_kb
2417 # The default behavior of SEEK_HOLE is to always return EOF.
2418 # Filesystems that implement non-default behavior return the offset
2419 # of holes with SEEK_HOLE. There is no way to query the filesystem
2420 # of which behavior it is implementing.
2421 # We use this whitelist FSTYP, to set expectation and avoid silent
2422 # regression of filesystem seek hole behavior.
2425 _fstyp_has_non_default_seek_data_hole()
2434 btrfs|ext4|xfs|cifs|f2fs|gfs2|ocfs2|tmpfs)
2438 # NFSv2 and NFSv3 only support default behavior of SEEK_HOLE,
2439 # while NFSv4 supports non-default behavior
2440 local nfsvers=`_df_device $TEST_DEV | $AWK_PROG '{ print $2 }'`
2441 [ "$nfsvers" = "nfs4" ]
2445 if [ ! -z $OVL_BASE_FSTYP -a $OVL_BASE_FSTYP != "overlay" ]; then
2446 _fstyp_has_non_default_seek_data_hole $OVL_BASE_FSTYP
2449 # Assume that base fs has default behavior
2454 # by default fstyp has default SEEK_HOLE behavior;
2455 # if your fs has non-default behavior, add it to whitelist above!
2461 # Run seek sanity test with predefined expectation for SEEK_DATA/HOLE behavior
2462 _run_seek_sanity_test()
2465 if _fstyp_has_non_default_seek_data_hole; then
2468 $here/src/seek_sanity_test $testseekargs $*
2471 # Check if the file system supports seek_data/hole
2472 _require_seek_data_hole()
2474 local dev=${1:-$TEST_DEV}
2475 local testfile=$TEST_DIR/$$.seek
2476 local testseek=`$here/src/seek_sanity_test -t $testfile 2>&1`
2478 rm -f $testfile &>/dev/null
2479 echo $testseek | grep -q "Kernel does not support" && \
2480 _notrun "File system does not support llseek(2) SEEK_DATA/HOLE"
2481 # Disable extent zeroing for ext4 as that change where holes are
2483 if [ "$FSTYP" = "ext4" ]; then
2484 _ext4_disable_extent_zeroout $dev
2490 _require_test_program "runas"
2495 "$here/src/runas" "$@"
2498 _require_richacl_prog()
2500 _require_command "$GETRICHACL_PROG" getrichacl
2501 _require_command "$SETRICHACL_PROG" setrichacl
2504 _require_scratch_richacl_xfs()
2506 _scratch_mkfs_xfs_supported -m richacl=1 >/dev/null 2>&1 \
2507 || _notrun "mkfs.xfs doesn't have richacl feature"
2508 _scratch_mkfs_xfs -m richacl=1 >/dev/null 2>&1
2509 _try_scratch_mount >/dev/null 2>&1 \
2510 || _notrun "kernel doesn't support richacl feature on $FSTYP"
2514 _require_scratch_richacl_ext4()
2516 _scratch_mkfs -O richacl >/dev/null 2>&1 \
2517 || _notrun "can't mkfs $FSTYP with option -O richacl"
2518 _try_scratch_mount >/dev/null 2>&1 \
2519 || _notrun "kernel doesn't support richacl feature on $FSTYP"
2523 _require_scratch_richacl_support()
2526 $GETFATTR_PROG -n system.richacl >/dev/null 2>&1 \
2527 || _notrun "this test requires richacl support on \$SCRATCH_DEV"
2531 _require_scratch_richacl()
2534 xfs) _require_scratch_richacl_xfs
2536 ext4) _require_scratch_richacl_ext4
2539 _require_scratch_richacl_support
2541 *) _notrun "this test requires richacl support on \$SCRATCH_DEV"
2546 _scratch_mkfs_richacl()
2549 xfs) _scratch_mkfs_xfs -m richacl=1
2551 ext4) _scratch_mkfs -O richacl
2559 # check if the given device is mounted, if so, return mount point
2563 local fstype=${2:-$FSTYP}
2565 if [ $# -lt 1 ]; then
2566 echo "Usage: _is_dev_mounted <device> [fstype]" 1>&2
2570 findmnt -rncv -S $dev -t $fstype -o TARGET | head -1
2573 # check if the given dir is a mount point, if so, return mount point
2574 _is_dir_mountpoint()
2577 local fstype=${2:-$FSTYP}
2579 if [ $# -lt 1 ]; then
2580 echo "Uasge: _is_dir_mountpoint <dir> [fstype]" 1>&2
2584 findmnt -rncv -t $fstype -o TARGET $dir | head -1
2587 # remount a FS to a new mode (ro or rw)
2593 echo "Usage: _remount device ro/rw" 1>&2
2599 if ! mount -o remount,$mode $device
2601 echo "_remount: failed to remount filesystem on $device as $mode"
2606 # Run the appropriate repair/check on a filesystem
2608 # if the filesystem is mounted, it's either remounted ro before being
2609 # checked or it's unmounted and then remounted
2612 # If set, we remount ro instead of unmounting for fsck
2615 _umount_or_remount_ro()
2619 echo "Usage: _umount_or_remount_ro <device>" 1>&2
2624 local mountpoint=`_is_dev_mounted $device`
2626 if [ $USE_REMOUNT -eq 0 ]; then
2627 $UMOUNT_PROG $device
2634 _mount_or_remount_rw()
2636 if [ $# -ne 3 ]; then
2637 echo "Usage: _mount_or_remount_rw <opts> <dev> <mnt>" 1>&2
2644 if [ $USE_REMOUNT -eq 0 ]; then
2645 if [ "$FSTYP" != "overlay" ]; then
2646 _mount -t $FSTYP $mount_opts $device $mountpoint
2648 _overlay_mount $device $mountpoint
2650 if [ $? -ne 0 ]; then
2651 _dump_err "!!! failed to remount $device on $mountpoint"
2661 # Check a generic filesystem in no-op mode; this assumes that the
2662 # underlying fsck program accepts "-n" for a no-op (check-only) run,
2663 # and that it will still return an errno for corruption in this mode.
2665 # Filesystems which don't support this will need to define their
2666 # own check routine.
2668 _check_generic_filesystem()
2672 # If type is set, we're mounted
2673 local type=`_fs_type $device`
2676 if [ "$type" = "$FSTYP" ]
2679 local mountpoint=`_umount_or_remount_ro $device`
2682 fsck -t $FSTYP $FSCK_OPTIONS $device >$tmp.fsck 2>&1
2685 _log_err "_check_generic_filesystem: filesystem on $device is inconsistent"
2686 echo "*** fsck.$FSTYP output ***" >>$seqres.full
2687 cat $tmp.fsck >>$seqres.full
2688 echo "*** end fsck.$FSTYP output" >>$seqres.full
2696 echo "*** mount output ***" >>$seqres.full
2697 _mount >>$seqres.full
2698 echo "*** end mount output" >>$seqres.full
2699 elif [ "$type" = "$FSTYP" ]
2702 _mount_or_remount_rw "$MOUNT_OPTIONS" $device $mountpoint
2706 if [ $ok -eq 0 ]; then
2708 if [ "$iam" != "check" ]; then
2717 # Filter the knowen errors the UDF Verifier reports.
2718 _udf_test_known_error_filter()
2720 egrep -v "PVD 60 Error: Interchange Level: 1, Maximum Interchange Level: 0|FSD 28 Error: Interchange Level: 1, Maximum Interchange Level: 1,|PVD 72 Warning: Volume Set Identifier: \"\*IRIX UDF\",|Warning: [0-9]+ unused blocks NOT marked as unallocated."
2724 _check_udf_filesystem()
2726 [ "$DISABLE_UDF_TEST" == "1" ] && return
2728 if [ $# -ne 1 -a $# -ne 2 ]
2730 echo "Usage: _check_udf_filesystem device [last_block]" 1>&2
2734 if [ ! -x $here/src/udf_test ]
2736 echo "udf_test not installed, please download and build the Philips"
2737 echo "UDF Verification Software from http://www.extra.research.philips.com/udf/."
2738 echo "Then copy the udf_test binary to $here/src/."
2739 echo "If you do not wish to run udf_test then set environment variable DISABLE_UDF_TEST"
2746 if [ $# -eq 2 ]; then
2747 opt_arg="-lastvalidblock $(( $2 - 1 ))"
2750 rm -f $seqres.checkfs
2751 sleep 1 # Due to a problem with time stamps in udf_test
2752 $here/src/udf_test $opt_arg $device | tee $seqres.checkfs | egrep "Error|Warning" | \
2753 _udf_test_known_error_filter | \
2754 egrep -iv "Error count:.*[0-9]+.*total occurrences:.*[0-9]+|Warning count:.*[0-9]+.*total occurrences:.*[0-9]+" && \
2755 echo "Warning UDF Verifier reported errors see $seqres.checkfs." && return 1
2766 # no way to check consistency for nfs
2769 # no way to check consistency for cifs
2772 # no way to check consistency for 9p
2775 # no way to check consistency for virtiofs
2778 # no way to check consistency for CephFS
2781 # no way to check consistency for GlusterFS
2784 _check_overlay_test_fs
2789 # do nothing for now
2792 _check_btrfs_filesystem $TEST_DEV
2795 # no way to check consistency for tmpfs
2798 # there is no fsck program for ubifs yet
2801 _check_generic_filesystem $TEST_DEV
2808 local device=$SCRATCH_DEV
2809 [ $# -eq 1 ] && device=$1
2813 local scratch_log="none"
2814 local scratch_rt="none"
2815 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
2816 scratch_log="$SCRATCH_LOGDEV"
2818 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_RTDEV" ] && \
2819 scratch_rt="$SCRATCH_RTDEV"
2821 _check_xfs_filesystem $device $scratch_log $scratch_rt
2824 _check_udf_filesystem $device $udf_fsize
2827 # Don't know how to check an NFS filesystem, yet.
2830 # Don't know how to check a CIFS filesystem, yet.
2833 # no way to check consistency for 9p
2836 # no way to check consistency for virtiofs
2839 # no way to check consistency for CephFS
2842 # no way to check consistency for GlusterFS
2845 _check_overlay_scratch_fs
2850 _check_btrfs_filesystem $device
2853 # no way to check consistency for tmpfs
2856 # there is no fsck program for ubifs yet
2859 _check_generic_filesystem $device
2864 _full_fstyp_details()
2866 [ -z "$FSTYP" ] && FSTYP=xfs
2867 if [ $FSTYP = xfs ]; then
2868 if [ -d /proc/fs/xfs ]; then
2869 if grep -q 'debug 0' /proc/fs/xfs/stat; then
2870 FSTYP="$FSTYP (non-debug)"
2871 elif grep -q 'debug 1' /proc/fs/xfs/stat; then
2872 FSTYP="$FSTYP (debug)"
2875 if uname -a | grep -qi 'debug'; then
2876 FSTYP="$FSTYP (debug)"
2878 FSTYP="$FSTYP (non-debug)"
2885 _full_platform_details()
2888 local host=`hostname -s`
2889 local kernel=`uname -rv`
2890 local platform=`uname -m`
2891 echo "$os/$platform $host $kernel"
2896 if [ "`uname`" == "Linux" ]; then
2899 echo Unknown operating system: `uname`
2904 _link_out_file_named()
2907 local suffix=$(FEATURES="$features" perl -e '
2909 my $feature, $result, $suffix, $opts;
2911 foreach $feature (split(/,/, $ENV{"FEATURES"})) {
2912 $feathash{$feature} = 1;
2914 $result = "default";
2919 ($opts, $suffix) = split(/ *: */);
2920 foreach my $opt (split(/,/, $opts)) {
2921 if (!exists($feathash{$opt})) {
2934 ln -fs $(basename $1).$suffix $1
2941 if [ $# -eq 0 ]; then
2942 features="$(_get_os_name),$FSTYP"
2943 if [ -n "$MOUNT_OPTIONS" ]; then
2944 features=$features,${MOUNT_OPTIONS##"-o "}
2950 _link_out_file_named $seqfull.out "$features"
2959 # convert urandom incompressible data to compressible text data
2962 od /dev/urandom | dd iflag=fullblock ${*}
2965 #takes files, randomdata
2973 if [ $size -gt 0 ]; then
2974 if [ "$2" == "false" ]; then
2975 dd if=/dev/zero of=$file bs=1024 count=$size 2>&1 | _filter_dd
2976 elif [ "$2" == "comp" ]; then
2977 _ddt of=$file bs=1024 count=$size 2>&1 | _filter_dd
2979 dd if=/dev/urandom of=$file bs=1024 count=$size 2>&1 | _filter_dd
2986 # takes dirname, depth, randomdata
2989 local dirname=$1 depth=$2 randomdata=$3
2990 mkdir $dirname || die "mkdir $dirname failed"
2993 _nfiles $files $randomdata # files for this dir and data type
2995 [ $depth -eq 0 ] && return
2996 local deep=$(( depth - 1 )) # go 1 down
2998 [ $verbose = true ] && echo "descending, depth from leaves = $deep"
3001 while [ $d -lt $dirs ]
3003 _descend d$d $deep &
3009 # Populate a filesystem with inodes for performance experiments
3011 # usage: populate [-v] [-n ndirs] [-f nfiles] [-d depth] [-r root] [-s size] [-x]
3016 local dirs=5 # ndirs in each subdir till leaves
3017 local size=0 # sizeof files in K
3018 local files=100 # num files in _each_ subdir
3019 local depth=2 # depth of tree from root to leaves
3021 local root=root # path of initial root of directory tree
3022 local randomdata=false # -x data type urandom, zero or compressible
3026 while getopts "d:f:n:r:s:v:x:c" c
3035 x) randomdata=true;;
3036 c) randomdata=comp;;
3040 _descend $root $depth $randomdata
3045 [ $verbose = true ] && echo done
3048 # query whether the given file has the given inode flag set
3055 if $XFS_IO_PROG -r -c 'lsattr -v' "$file" | grep -q "$flag" ; then
3061 # query the given files extsize allocator hint in bytes (if any)
3068 blocks=`$XFS_IO_PROG -r -c 'stat' "$file" | \
3069 awk '/^xattr.extsize =/ { print $3 }'`
3070 [ -z "$blocks" ] && blocks="0"
3074 # scratch_dev_pool should contain the disks pool for the btrfs raid
3075 _require_scratch_dev_pool()
3080 if [ -z "$SCRATCH_DEV_POOL" ]; then
3081 _notrun "this test requires a valid \$SCRATCH_DEV_POOL"
3084 if [ -z "$1" ]; then
3090 # btrfs test case needs ndevs or more scratch_dev_pool; other FS not sure
3094 if [ "`echo $SCRATCH_DEV_POOL|wc -w`" -lt $ndevs ]; then
3095 _notrun "btrfs and this test needs $ndevs or more disks in SCRATCH_DEV_POOL"
3099 _notrun "dev_pool is not supported by fstype \"$FSTYP\""
3103 for i in $SCRATCH_DEV_POOL; do
3104 if [ "`_is_block_dev "$i"`" = "" ]; then
3105 _notrun "this test requires valid block disk $i"
3107 if [ "`_is_block_dev "$i"`" = "`_is_block_dev "$TEST_DEV"`" ]; then
3108 _notrun "$i is part of TEST_DEV, this test requires unique disks"
3110 if _mount | grep -q $i; then
3111 if ! $UMOUNT_PROG $i; then
3112 echo "failed to unmount $i - aborting"
3116 # to help better debug when something fails, we remove
3117 # traces of previous btrfs FS on the dev.
3118 dd if=/dev/zero of=$i bs=4096 count=100 > /dev/null 2>&1
3122 # ensure devices in SCRATCH_DEV_POOL are of the same size
3123 # must be called after _require_scratch_dev_pool
3124 _require_scratch_dev_pool_equal_size()
3130 # SCRATCH_DEV has been set to the first device in SCRATCH_DEV_POOL
3131 size=`_get_device_size $SCRATCH_DEV`
3132 for dev in $SCRATCH_DEV_POOL; do
3133 newsize=`_get_device_size $dev`
3134 if [ $size -ne $newsize ]; then
3135 _notrun "This test requires devices in SCRATCH_DEV_POOL have the same size"
3141 # Check that fio is present, and it is able to execute given jobfile
3146 _require_command "$FIO_PROG" fio
3147 if [ -z "$1" ]; then
3151 $FIO_PROG --warnings-fatal --showcmd $job >> $seqres.full 2>&1
3152 [ $? -eq 0 ] || _notrun "$FIO_PROG too old, see $seqres.full"
3155 # Does freeze work on this fs?
3158 xfs_freeze -f "$TEST_DIR" >/dev/null 2>&1
3160 xfs_freeze -u "$TEST_DIR" >/dev/null 2>&1
3161 [ $result -eq 0 ] || _notrun "$FSTYP does not support freezing"
3164 # Does NFS export work on this fs?
3167 _require_test_program "open_by_handle"
3168 mkdir -p "$TEST_DIR"/exportfs_test
3169 $here/src/open_by_handle -c "$TEST_DIR"/exportfs_test 2>&1 \
3170 || _notrun "$FSTYP does not support NFS export"
3174 # Does shutdown work on this fs?
3175 _require_scratch_shutdown()
3177 [ -x $here/src/godown ] || _notrun "src/godown executable not found"
3179 _scratch_mkfs > /dev/null 2>&1 || _notrun "_scratch_mkfs failed on $SCRATCH_DEV"
3182 if [ $FSTYP = "overlay" ]; then
3183 if [ -z $OVL_BASE_SCRATCH_DEV ]; then
3184 # In lagacy overlay usage, it may specify directory as
3185 # SCRATCH_DEV, in this case OVL_BASE_SCRATCH_DEV
3186 # will be null, so check OVL_BASE_SCRATCH_DEV before
3187 # running shutdown to avoid shutting down base fs accidently.
3188 _notrun "This test requires a valid $OVL_BASE_SCRATCH_DEV as ovl base fs"
3190 $here/src/godown -f $OVL_BASE_SCRATCH_MNT 2>&1 \
3191 || _notrun "Underlying filesystem does not support shutdown"
3194 $here/src/godown -f $SCRATCH_MNT 2>&1 \
3195 || _notrun "$FSTYP does not support shutdown"
3206 local attributes=$($XFS_IO_PROG -c 'statx -r' $target | awk '/stat.attributes / { print $3 }')
3207 if [ $exp_s_dax -eq 0 ]; then
3208 (( attributes & 0x2000 )) && echo "$target has unexpected S_DAX flag"
3210 (( attributes & 0x2000 )) || echo "$target doesn't have expected S_DAX flag"
3219 if [ $exp_xflag -eq 0 ]; then
3220 _test_inode_flag dax $target && echo "$target has unexpected FS_XFLAG_DAX flag"
3222 _test_inode_flag dax $target || echo "$target doesn't have expected FS_XFLAG_DAX flag"
3226 # Check if dax mount options are supported
3228 # $1 can be either 'dax=always' or 'dax'
3231 # Check for the new dax options (dax=inode, dax=always or dax=never)
3232 # by passing "dax=always".
3234 # Check for the old dax or new dax=always by passing "dax".
3236 # This only accepts 'dax=always' because dax=always, dax=inode and
3237 # dax=never are always supported together. So if the other options are
3238 # required checking for 'dax=always' indicates support for the other 2.
3240 # Return 0 if filesystem/device supports the specified dax option.
3241 # Return 1 if mount fails with the specified dax option.
3242 # Return 2 if /proc/mounts shows wrong dax option.
3243 _check_scratch_dax_mountopt()
3248 _scratch_mkfs > /dev/null 2>&1
3250 _try_scratch_mount "-o $option" > /dev/null 2>&1 || return 1
3252 if _fs_options $SCRATCH_DEV | egrep -q "dax(=always|,|$)"; then
3261 # Throw notrun if _check_scratch_dax_mountopt() returns a non-zero value.
3262 _require_scratch_dax_mountopt()
3266 _check_scratch_dax_mountopt "$mountopt"
3269 [ $res -eq 1 ] && _notrun "mount $SCRATCH_DEV with $mountopt failed"
3270 [ $res -eq 2 ] && _notrun "$SCRATCH_DEV $FSTYP does not support -o $mountopt"
3273 _require_dax_iflag()
3275 _require_xfs_io_command "chattr" "x"
3278 # Does norecovery support by this fs?
3279 _require_norecovery()
3281 _try_scratch_mount -o ro,norecovery || \
3282 _notrun "$FSTYP does not support norecovery"
3286 # Does this filesystem support metadata journaling?
3287 # We exclude ones here that don't; otherwise we assume that it does, so the
3288 # test will run, fail, and motivate someone to update this test for a new
3291 # It's possible that TEST_DEV and SCRATCH_DEV have different features (it'd be
3292 # odd, but possible) so check $TEST_DEV by default, but we can optionall pass
3294 _has_metadata_journaling()
3303 ext2|vfat|msdos|udf|exfat)
3304 echo "$FSTYP does not support metadata journaling"
3308 # ext4 could be mkfs'd without a journal...
3310 $DUMPE2FS_PROG -h $dev 2>&1 | grep -q has_journal || {
3311 echo "$FSTYP on $dev not configured with metadata journaling"
3314 # ext4 might not load a journal
3315 if _normalize_mount_options | grep -qw "noload"; then
3316 echo "mount option \"noload\" not allowed in this test"
3321 # metadata journaling check is based on base filesystem configurations
3322 # and because -overlay option saves those configurations to OVL_BASE_*,
3323 # adding restore/override the configurations before/after the check.
3324 if [ ! -z $OVL_BASE_FSTYP -a $OVL_BASE_FSTYP != "overlay" ]; then
3327 _overlay_config_restore
3328 _has_metadata_journaling
3330 _overlay_config_override
3333 echo "No metadata journaling support for legacy overlay setup"
3338 # by default we pass; if you need to, add your fs above!
3344 _require_metadata_journaling()
3346 local msg=$(_has_metadata_journaling $@)
3347 if [ -n "$msg" ]; then
3354 $XFS_IO_PROG -r -c "fiemap" $1 | tail -n +2 | grep -v hole | wc -l
3357 # Similar to _count_extents() but if any extent is shared multiples times in
3358 # the file (reflinked to different file offsets), it is accounted as 1 extent
3359 # instead of N extents.
3360 _count_exclusive_extents()
3362 $XFS_IO_PROG -r -c "fiemap" $1 | tail -n +2 | grep -v hole | \
3363 cut -d ' ' -f 3 | sort | uniq | wc -l
3368 $XFS_IO_PROG -r -c "fiemap" $1 | tail -n +2 | grep hole | wc -l
3371 _count_attr_extents()
3373 $XFS_IO_PROG -c "fiemap -a" $1 | tail -n +2 | grep -v hole | wc -l
3376 # arg 1 is dev to remove and is output of the below eg.
3377 # ls -l /sys/class/block/sdd | rev | cut -d "/" -f 3 | rev
3383 echo 1 > /sys/class/scsi_device/${lun}/device/delete || _fail "Remove disk failed"
3385 stat $disk > /dev/null 2>&1
3386 while [ $? -eq 0 ]; do
3388 stat $disk > /dev/null 2>&1
3392 # arg 1 is dev to add and is output of the below eg.
3393 # ls -l /sys/class/block/sdd | rev | cut -d "/" -f 3 | rev
3398 # arg 1 will be in h:t:d:l format now in the h and "t d l" format
3399 h=`echo ${1} | cut -d":" -f 1`
3400 tdl=`echo ${1} | cut -d":" -f 2-|sed 's/:/ /g'`
3402 echo ${tdl} > /sys/class/scsi_host/host${h}/scan || _fail "Add disk failed"
3404 # ensure the device comes online
3405 local dev_back_oneline=0
3407 for i in `seq 1 10`; do
3408 if [ -d /sys/class/scsi_device/${1}/device/block ]; then
3409 local dev=`ls /sys/class/scsi_device/${1}/device/block`
3411 for j in `seq 1 10`;
3413 stat /dev/$dev > /dev/null 2>&1
3414 if [ $? -eq 0 ]; then
3425 if [ $dev_back_oneline -eq 0 ]; then
3426 echo "/dev/$dev online failed" >> $seqres.full
3428 echo "/dev/$dev is back online" >> $seqres.full
3434 if [ -z "$FSTRIM_PROG" ]; then
3435 _notrun "This test requires fstrim utility."
3439 _require_batched_discard()
3441 if [ $# -ne 1 ]; then
3442 echo "Usage: _require_batched_discard mnt_point" 1>&2
3446 $FSTRIM_PROG $1 > /dev/null 2>&1 || _notrun "FITRIM not supported on $1"
3451 if [ -z "$DUMPE2FS_PROG" ]; then
3452 _notrun "This test requires dumpe2fs utility."
3458 if [ ! -e /proc/self/uid_map ]; then
3459 _notrun "This test requires procfs uid_map support."
3461 if [ ! -e /proc/self/gid_map ]; then
3462 _notrun "This test requires procfs gid_map support."
3468 FSSUM_PROG=$here/src/fssum
3469 [ -x $FSSUM_PROG ] || _notrun "fssum not built"
3474 CLONER_PROG=$here/src/cloner
3475 [ -x $CLONER_PROG ] || \
3476 _notrun "cloner binary not present at $CLONER_PROG"
3479 # Normalize mount options from global $MOUNT_OPTIONS
3480 # Convert options like "-o opt1,opt2 -oopt3" to
3482 _normalize_mount_options()
3484 echo $MOUNT_OPTIONS | sed -n 's/-o\s*\(\S*\)/\1/gp'| sed 's/,/ /g'
3487 # skip test if MOUNT_OPTIONS contains the given strings
3488 # Both dax and dax=always are excluded if dax or dax=always is passed
3489 _exclude_scratch_mount_option()
3491 local mnt_opts=$(_normalize_mount_options)
3493 while [ $# -gt 0 ]; do
3495 echo "$pattern" | egrep -q "dax(=always|$)" && \
3496 pattern="dax(=always| |$)"
3497 if echo $mnt_opts | egrep -q "$pattern"; then
3498 _notrun "mount option \"$1\" not allowed in this test"
3506 _exclude_scratch_mount_option "noatime"
3509 _notrun "atime related mount options have no effect on $FSTYP"
3517 _scratch_mkfs > /dev/null 2>&1
3518 _try_scratch_mount -o relatime || \
3519 _notrun "relatime not supported by the current kernel"
3525 [ -x $here/src/nsexec ] || _notrun "src/nsexec executable not found"
3526 $here/src/nsexec -U true 2>/dev/null || _notrun "userns not supported by this kernel"
3529 _create_loop_device()
3532 dev=`losetup -f --show $file` || _fail "Cannot assign $file to a loop device"
3536 _destroy_loop_device()
3539 losetup -d $dev || _fail "Cannot destroy loop device $dev"
3542 _scale_fsstress_args()
3545 while [ $# -gt 0 ]; do
3547 -n) args="$args $1 $(($2 * $TIME_FACTOR))"; shift ;;
3548 -p) args="$args $1 $(($2 * $LOAD_FACTOR))"; shift ;;
3549 *) args="$args $1" ;;
3553 printf '%s\n' "$args"
3557 # Return the logical block size if running on a block device,
3558 # else substitute the page size.
3560 _min_dio_alignment()
3564 if [ -b "$dev" ]; then
3565 blockdev --getss $dev
3567 $here/src/feature -s
3573 echo "# $@" >> $seqres.full 2>&1
3574 "$@" >> $seqres.full 2>&1 || _fail "failed: '$@'"
3579 local target=`mktemp -p $TEST_DIR`
3580 local link=`mktemp -p $TEST_DIR -u`
3581 ln -s `basename $target` $link
3582 if [ "$?" -ne 0 ]; then
3584 _notrun "Require symlinks support"
3589 _require_hardlinks()
3591 local target=`mktemp -p $TEST_DIR`
3592 local link=`mktemp -p $TEST_DIR -u`
3594 if [ "$?" -ne 0 ]; then
3596 _notrun "No hardlink support"
3601 _require_test_fcntl_advisory_locks()
3603 [ "$FSTYP" != "cifs" ] && return 0
3604 cat /proc/mounts | grep $TEST_DEV | grep cifs | grep -q "nobrl" && return 0
3605 cat /proc/mounts | grep $TEST_DEV | grep cifs | grep -qE "nounix|forcemand" && \
3606 _notrun "Require fcntl advisory locks support"
3609 _require_test_fcntl_setlease()
3611 _require_test_program "locktest"
3612 touch $TEST_DIR/setlease_testfile
3613 $here/src/locktest -t $TEST_DIR/setlease_testfile >/dev/null 2>&1
3614 [ $? -eq 22 ] && _notrun "Require fcntl setlease support"
3617 _require_ofd_locks()
3619 # Give a test run by getlk wrlck on testfile.
3620 # If the running kernel does not support OFD locks,
3621 # EINVAL will be returned.
3622 _require_test_program "t_ofd_locks"
3623 touch $TEST_DIR/ofd_testfile
3624 $here/src/t_ofd_locks -t $TEST_DIR/ofd_testfile > /dev/null 2>&1
3625 [ $? -eq 22 ] && _notrun "Require OFD locks support"
3628 _require_test_lsattr()
3630 local testio=$(lsattr -d $TEST_DIR 2>&1)
3631 echo $testio | grep -q "Operation not supported" && \
3632 _notrun "lsattr not supported by test filesystem type: $FSTYP"
3633 echo $testio | grep -q "Inappropriate ioctl for device" && \
3634 _notrun "lsattr not supported by test filesystem type: $FSTYP"
3639 if [ -z "$1" ]; then
3640 echo "Usage: _require_chattr <attr>"
3645 touch $TEST_DIR/syscalltest
3646 chattr "+$attribute" $TEST_DIR/syscalltest > $TEST_DIR/syscalltest.out 2>&1
3648 chattr "-$attribute" $TEST_DIR/syscalltest > $TEST_DIR/syscalltest.out 2>&1
3649 if [ "$ret" -ne 0 ]; then
3650 _notrun "file system doesn't support chattr +$attribute"
3652 cat $TEST_DIR/syscalltest.out >> $seqres.full
3653 rm -f $TEST_DIR/syscalltest.out
3658 if [ -z "$1" ]; then
3659 echo "Usage: _get_total_inode <mnt>"
3663 nr_inode=`$DF_PROG -i $1 | tail -1 | awk '{print $3}'`
3669 if [ -z "$1" ]; then
3670 echo "Usage: _get_used_inode <mnt>"
3674 nr_inode=`$DF_PROG -i $1 | tail -1 | awk '{print $4}'`
3678 _get_used_inode_percent()
3680 if [ -z "$1" ]; then
3681 echo "Usage: _get_used_inode_percent <mnt>"
3685 pct_inode=`$DF_PROG -i $1 | tail -1 | awk '{ print $6 }' | \
3692 if [ -z "$1" ]; then
3693 echo "Usage: _get_free_inode <mnt>"
3697 nr_inode=`$DF_PROG -i $1 | tail -1 | awk '{print $5}'`
3701 # get the available space in bytes
3703 _get_available_space()
3705 if [ -z "$1" ]; then
3706 echo "Usage: _get_available_space <mnt>"
3710 avail_kb=`$DF_PROG $1 | tail -n1 | awk '{ print $5 }'`
3711 echo $((avail_kb * 1024))
3714 # return device size in kb
3717 grep -w `_short_dev $1` /proc/partitions | awk '{print $3}'
3720 # Make sure we actually have dmesg checking set up.
3721 _require_check_dmesg()
3723 test -w /dev/kmsg || \
3724 _notrun "Test requires writable /dev/kmsg."
3727 # Return the dmesg log since the start of this test. Caller must ensure that
3728 # /dev/kmsg was writable when the test was started so that we can find the
3729 # beginning of this test's log messages; _require_check_dmesg does this.
3730 _dmesg_since_test_start()
3732 # search the dmesg log of last run of $seqnum for possible failures
3733 # use sed \cregexpc address type, since $seqnum contains "/"
3734 dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | \
3738 # check dmesg log for a specific string, subject to the same requirements as
3739 # _dmesg_since_test_start.
3742 _dmesg_since_test_start | egrep -q "$1"
3745 # Default filter for dmesg scanning.
3746 # Ignore lockdep complaining about its own bugginess when scanning dmesg
3747 # output, because we shouldn't be failing filesystem tests on account of
3749 _check_dmesg_filter()
3751 egrep -v -e "BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low" \
3752 -e "BUG: MAX_STACK_TRACE_ENTRIES too low"
3755 # check dmesg log for WARNING/Oops/etc.
3758 if [ ! -f ${RESULT_DIR}/check_dmesg ]; then
3761 rm -f ${RESULT_DIR}/check_dmesg
3763 # default filter is a simple cat command, caller could provide a
3764 # customized filter and pass the name through the first argument, to
3765 # filter out intentional WARNINGs or Oopses
3766 local filter=${1:-_check_dmesg_filter}
3768 _dmesg_since_test_start | $filter >$seqres.dmesg
3769 egrep -q -e "kernel BUG at" \
3773 -e "possible recursive locking detected" \
3774 -e "Internal error" \
3775 -e "(INFO|ERR): suspicious RCU usage" \
3776 -e "INFO: possible circular locking dependency detected" \
3777 -e "general protection fault:" \
3778 -e "BUG .* remaining" \
3781 if [ $? -eq 0 ]; then
3782 _dump_err "_check_dmesg: something found in dmesg (see $seqres.dmesg)"
3785 if [ "$KEEP_DMESG" != "yes" ]; then
3792 # capture the kmemleak report
3795 local kern_knob="$DEBUGFS_MNT/kmemleak"
3796 local leak_file="$1"
3798 # Tell the kernel to scan for memory leaks. Apparently the write
3799 # returns before the scan is complete, so do it twice in the hopes
3800 # that twice is enough to capture all the leaks.
3801 echo "scan" > "$kern_knob"
3802 cat "$kern_knob" > /dev/null
3803 echo "scan" > "$kern_knob"
3804 cat "$kern_knob" > "$leak_file.tmp"
3805 if [ -s "$leak_file.tmp" ]; then
3806 cat > "$leak_file" << ENDL
3807 EXPERIMENTAL kmemleak reported some memory leaks! Due to the way kmemleak
3808 works, the leak might be from an earlier test, or something totally unrelated.
3810 cat "$leak_file.tmp" >> "$leak_file"
3812 rm -rf "$leak_file.tmp"
3813 echo "clear" > "$kern_knob"
3816 # Figure out if the running kernel supports kmemleak; if it does, clear out
3817 # anything that leaked before we even started testing. The leak checker only
3818 # needs to be primed like this once per ./check invocation.
3821 local kern_knob="$DEBUGFS_MNT/kmemleak"
3822 KMEMLEAK_CHECK_FILE="/tmp/check_kmemleak"
3824 # Since kernel v4.19-rc3, the kmemleak knob exists even if kmemleak is
3825 # disabled, but returns EBUSY on write. So instead of relying on
3826 # existance of writable knob file, we use a test file to indicate that
3827 # _check_kmemleak() is enabled only if we actually managed to write to
3829 rm -f "$KMEMLEAK_CHECK_FILE"
3831 if [ ! -w "$kern_knob" ]; then
3835 # Disable the automatic scan so that we can control it completely,
3836 # then dump all the leaks recorded so far.
3837 if echo "scan=off" > "$kern_knob" 2>/dev/null; then
3838 _capture_kmemleak /dev/null
3839 touch "$KMEMLEAK_CHECK_FILE"
3843 # Kick the kmemleak checker to scan for leaks. Background leak scan mode is
3844 # not enabled, so we must call the kernel to ask for a scan and deal with the
3845 # results appropriately. This we do after every test completes, whether or not
3846 # it was successful.
3849 local kern_knob="$DEBUGFS_MNT/kmemleak"
3850 local leak_file="$seqres.kmemleak"
3852 if [ ! -f "$KMEMLEAK_CHECK_FILE" ]; then
3856 # Not enabled, so discard any report of leaks found.
3857 if [ "$USE_KMEMLEAK" != "yes" ]; then
3858 _capture_kmemleak /dev/null
3862 # Capture and report any leaks
3863 _capture_kmemleak "$leak_file"
3864 if [ -s "$leak_file" ]; then
3865 _dump_err "_check_kmemleak: something found in kmemleak (see $leak_file)"
3873 # don't check dmesg log after test
3874 _disable_dmesg_check()
3876 rm -f ${RESULT_DIR}/check_dmesg
3881 # make some further configuration checks here
3882 if [ "$TEST_DEV" = "" ]
3884 echo "common/rc: Error: \$TEST_DEV is not set"
3888 # if $TEST_DEV is not mounted, mount it now as XFS
3889 if [ -z "`_fs_type $TEST_DEV`" ]
3891 # $TEST_DEV is not mounted
3894 echo "common/rc: retrying test device mount with external set"
3895 [ "$USE_EXTERNAL" != "yes" ] && export USE_EXTERNAL=yes
3898 echo "common/rc: could not mount $TEST_DEV on $TEST_DIR"
3904 # Sanity check that TEST partition is not mounted at another mount point
3905 # or as another fs type
3906 _check_mounted_on TEST_DEV $TEST_DEV TEST_DIR $TEST_DIR $FSTYP || exit 1
3907 if [ -n "$SCRATCH_DEV" ]; then
3908 # Sanity check that SCRATCH partition is not mounted at another
3909 # mount point, because it is about to be unmounted and formatted.
3910 # Another fs type for scratch is fine (bye bye old fs type).
3911 _check_mounted_on SCRATCH_DEV $SCRATCH_DEV SCRATCH_MNT $SCRATCH_MNT
3912 [ $? -le 1 ] || exit 1
3915 # Figure out if we need to add -F ("foreign", deprecated) option to xfs_io
3916 $XFS_IO_PROG -c stat $TEST_DIR 2>&1 | grep -q "is not on an XFS filesystem" && \
3917 export XFS_IO_PROG="$XFS_IO_PROG -F"
3919 # xfs_io -i option starts an idle thread for xfs_io.
3920 # With single threaded process, the file table is not shared
3921 # and file structs are not reference counted.
3922 # Spawning an idle thread can help detecting file struct
3923 # reference leaks, so we want to enable the option whenever
3925 $XFS_IO_PROG -i -c quit 2>/dev/null && \
3926 export XFS_IO_PROG="$XFS_IO_PROG -i"
3928 # xfs_copy on v5 filesystems do not require the "-d" option if xfs_db
3929 # can change the UUID on v5 filesystems
3930 if [ "$FSTYP" == "xfs" ]; then
3932 $MKFS_XFS_PROG -d file,name=/tmp/$$.img,size=512m >/dev/null 2>&1
3933 # xfs_db will return 0 even if it can't generate a new uuid, so
3934 # check the output to make sure if it can change UUID of V5 xfs
3935 $XFS_DB_PROG -x -c "uuid generate" /tmp/$$.img \
3936 | grep -q "invalid UUID\|supported on V5 fs" \
3937 && export XFS_COPY_PROG="$XFS_COPY_PROG -d"
3942 # get real device path name by following link
3946 if [ -b "$dev" ] && [ -L "$dev" ]; then
3947 dev=`readlink -f "$dev"`
3952 # basename of a device
3955 echo `basename $(_real_dev $1)`
3960 local dev=`_real_dev $1`
3961 local maj=$(stat -c%t $dev | tr [:lower:] [:upper:])
3962 local min=$(stat -c%T $dev | tr [:lower:] [:upper:])
3963 maj=$(echo "ibase=16; $maj" | bc)
3964 min=$(echo "ibase=16; $min" | bc)
3965 echo /sys/dev/block/$maj:$min
3968 # Get the minimum block size of a file. Usually this is the
3969 # minimum fs block size, but some filesystems (ocfs2) do block
3970 # mappings in larger units.
3971 _get_file_block_size()
3973 if [ -z $1 ] || [ ! -d $1 ]; then
3974 echo "Missing mount point argument for _get_file_block_size"
3977 if [ "$FSTYP" = "ocfs2" ]; then
3984 # Get the minimum block size of an fs.
3987 if [ -z $1 ] || [ ! -d $1 ]; then
3988 echo "Missing mount point argument for _get_block_size"
3996 echo $(getconf PAGE_SIZE)
4003 local args=`echo $@ | sed -e "s/ BSIZE / $bsize /g" -e "s/ PSIZE / $psize /g"`
4004 set -- $here/ltp/fsx $args $FSX_AVOID $TEST_DIR/junk
4005 echo "$@" >>$seqres.full
4006 rm -f $TEST_DIR/junk
4007 "$@" 2>&1 | tee -a $seqres.full >$tmp.fsx
4008 if [ ${PIPESTATUS[0]} -ne 0 ]; then
4016 # Test for the existence of a sysfs entry at /sys/fs/$FSTYP/DEV/$ATTR
4018 # Only one argument is needed:
4019 # - attr: path name under /sys/fs/$FSTYP/DEV
4022 # _require_fs_sysfs error/fail_at_unmount
4026 local dname=$(_short_dev $TEST_DEV)
4028 if [ -z "$attr" -o -z "$dname" ];then
4029 _fail "Usage: _require_fs_sysfs <sysfs_attr_path>"
4032 if [ ! -e /sys/fs/${FSTYP}/${dname}/${attr} ];then
4033 _notrun "This test requires /sys/fs/${FSTYP}/${dname}/${attr}"
4039 $here/src/stat_test --check-statx ||
4040 _notrun "This test requires the statx system call"
4043 # Write "content" into /sys/fs/$FSTYP/$DEV/$ATTR
4045 # All arguments are necessary, and in this order:
4046 # - dev: device name, e.g. $SCRATCH_DEV
4047 # - attr: path name under /sys/fs/$FSTYP/$dev
4048 # - content: the content of $attr
4051 # _set_fs_sysfs_attr /dev/mapper/scratch-dev error/fail_at_unmount 0
4052 _set_fs_sysfs_attr()
4060 if [ ! -b "$dev" -o -z "$attr" -o -z "$content" ];then
4061 _fail "Usage: _set_fs_sysfs_attr <mounted_device> <attr> <content>"
4064 local dname=$(_short_dev $dev)
4065 echo "$content" > /sys/fs/${FSTYP}/${dname}/${attr}
4068 # Print the content of /sys/fs/$FSTYP/$DEV/$ATTR
4070 # All arguments are necessary, and in this order:
4071 # - dev: device name, e.g. $SCRATCH_DEV
4072 # - attr: path name under /sys/fs/$FSTYP/$dev
4075 # _get_fs_sysfs_attr /dev/mapper/scratch-dev error/fail_at_unmount
4076 _get_fs_sysfs_attr()
4081 if [ ! -b "$dev" -o -z "$attr" ];then
4082 _fail "Usage: _get_fs_sysfs_attr <mounted_device> <attr>"
4085 local dname=$(_short_dev $dev)
4086 cat /sys/fs/${FSTYP}/${dname}/${attr}
4089 # Generic test for specific filesystem feature.
4090 # Currently only implemented to test overlayfs features.
4091 _require_scratch_feature()
4097 _require_scratch_overlay_features ${feature}
4100 _fail "Test for feature '${feature}' of ${FSTYP} is not implemented"
4105 # Get the maximum size of a file in $TEST_DIR (s_maxbytes). On ext4 this will
4106 # be UINT32_MAX * block_size, but other filesystems may allow up to LLONG_MAX.
4107 _get_max_file_size()
4109 local testfile=$TEST_DIR/maxfilesize.$seq
4111 local r=9223372036854775807 # LLONG_MAX
4114 while (( l < r )); do
4115 # Use _math() to avoid signed integer overflow.
4116 local m=$(_math "($l + $r + 1) / 2")
4117 if $XFS_IO_PROG -f -c "truncate $m" $testfile \
4118 |& grep -q 'File too large'
4128 # get MAX_LFS_FILESIZE
4129 _get_max_lfs_filesize()
4131 case "$(getconf LONG_BIT)" in
4133 local ulong_max=$(getconf ULONG_MAX)
4134 local page_size=$(getconf PAGE_SIZE)
4135 echo $(( ulong_max * page_size ))
4138 echo 9223372036854775807
4141 _fail "sizeof(long) == $(getconf LONG_BIT)?"
4146 # The maximum filesystem label length, /not/ including terminating NULL
4160 _notrun "$FSTYP does not define maximum label length"
4165 # Helper to check above early in a script
4166 _require_label_get_max()
4168 # Just call _label_get_max which will notrun if appropriate
4169 dummy=$(_label_get_max)
4174 $UDEV_SETTLE_PROG >/dev/null 2>&1
4175 $DMSETUP_PROG remove "$@" >>$seqres.full 2>&1
4176 $DMSETUP_PROG mknodes >/dev/null 2>&1
4181 $DMSETUP_PROG create "$@" >>$seqres.full 2>&1 || return 1
4182 $DMSETUP_PROG mknodes >/dev/null 2>&1
4183 $UDEV_SETTLE_PROG >/dev/null 2>&1
4188 # Note: filesystems are not required to report btime (creation time)
4189 # if the caller doesn't ask for it, so we define STATX_BTIME here and
4190 # pass it in to the statx command.
4191 export STATX_BTIME=0x800
4192 $XFS_IO_PROG -f $TEST_DIR/test_creation_time -c "statx -m $STATX_BTIME -v" \
4193 | grep btime >>$seqres.full 2>&1 || \
4194 _notrun "inode creation time not supported by this filesystem"
4195 rm -f $TEST_DIR/test_creation_time
4198 _require_scratch_btime()
4201 _scratch_mkfs > /dev/null 2>&1
4204 # Note: filesystems are not required to report btime (creation time)
4205 # if the caller doesn't ask for it, so we define STATX_BTIME here and
4206 # pass it in to the statx command.
4207 export STATX_BTIME=0x800
4208 $XFS_IO_PROG -f $SCRATCH_MNT/test_creation_time -c "statx -m $STATX_BTIME -v" \
4209 | grep btime >>$seqres.full 2>&1 || \
4210 _notrun "inode creation time not supported by this filesystem"
4215 _require_inode_limits()
4217 if [ $(_get_free_inode $TEST_DIR) -eq 0 ]; then
4218 _notrun "$FSTYP does not have a fixed number of inodes available"
4222 _require_filefrag_options()
4224 _require_command "$FILEFRAG_PROG" filefrag
4227 local file="$TEST_DIR/options_testfile"
4230 ${FILEFRAG_PROG} -$options $file 2>&1 | grep -q "invalid option" && \
4231 _notrun "filefrag doesn't support $options option"
4237 _require_filefrag_options "B"
4239 local file="$TEST_DIR/fibmap_testfile"
4242 ${FILEFRAG_PROG} -B $file 2>&1 | grep -q "FIBMAP[[:space:]]*unsupported"
4243 if [ $? -eq 0 ]; then
4244 _notrun "FIBMAP not supported by this filesystem"
4249 _try_wipe_scratch_devs()
4251 test -x "$WIPEFS_PROG" || return 0
4253 # Do specified filesystem wipe at first
4256 _try_wipe_scratch_xfs
4260 # Then do wipefs on all scratch devices
4261 for dev in $SCRATCH_DEV_POOL $SCRATCH_DEV $SCRATCH_LOGDEV $SCRATCH_RTDEV; do
4262 test -b $dev && $WIPEFS_PROG -a $dev
4266 # Only run this on xfs if xfs_scrub is available and has the unicode checker
4267 _check_xfs_scrub_does_unicode() {
4268 [ "${FSTYP}" == "xfs" ] || return 1
4273 _supports_xfs_scrub "${mount}" "${dev}" || return 1
4275 # We only care if xfs_scrub has unicode string support...
4276 if ! type ldd > /dev/null 2>&1 || \
4277 ! ldd "${XFS_SCRUB_PROG}" | grep -q libicui18n; then
4284 # exfat timestamps start at 1980 and cannot be prior to epoch
4285 _require_negative_timestamps() {
4288 _notrun "$FSTYP does not support negative timestamps"
4293 # Require the 'accton' userspace tool and CONFIG_BSD_PROCESS_ACCT=y.
4294 _require_bsd_process_accounting()
4296 _require_command "$ACCTON_PROG" accton
4297 $ACCTON_PROG on &> $tmp.test_accton
4298 cat $tmp.test_accton >> $seqres.full
4299 if grep 'Function not implemented' $tmp.test_accton; then
4300 _notrun "BSD process accounting support unavailable"
4302 $ACCTON_PROG off >> $seqres.full
4305 _require_sysctl_variable()
4308 sysctl $name &>/dev/null || _notrun "$name sysctl unavailable"
4313 mknod $TEST_DIR/$seq.null c 1 3 \
4314 || _notrun "$FSTYP does not support mknod/mkfifo"
4315 rm -f $TEST_DIR/$seq.null
4320 ################################################################################
4321 # make sure this script returns success