2 # SPDX-License-Identifier: GPL-2.0+
3 # Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved.
7 BC=$(which bc 2> /dev/null) || BC=
9 # Some tests are not relevant or functional when testing XFS realtime
10 # subvolumes along with the rtinherit=1 mkfs option. In these cases,
11 # this test will opt-out of the test.
12 _require_no_rtinherit()
14 [ "$FSTYP" = "xfs" ] && echo "$MKFS_OPTIONS" |
15 egrep -q "rtinherit([^=]|=1|$)" && \
16 _notrun "rtinherit mkfs option is not supported by this test."
22 _notrun "this test requires 'bc' tool for doing math operations"
28 [ $# -le 0 ] && return
29 LANG=C echo "scale=0; $@" | "$BC" -q 2> /dev/null
34 if [ "$HOSTOS" == "Linux" ]
36 command dd --help 2>&1 | grep noxfer >/dev/null
40 command dd status=noxfer $@
49 # Prints the md5 checksum of a given file
52 md5sum $1 | cut -d ' ' -f1
55 # Write a byte into a range of a file
61 local xfs_io_args="$5"
63 $XFS_IO_PROG $xfs_io_args -f -c "pwrite -S $pattern $offset $len" "$file"
66 # mmap-write a byte into a range of a file
74 $XFS_IO_PROG -f -c "mmap -rw 0 $mmap_len" -c "mwrite -S $pattern $offset $len" "$file"
77 # ls -l w/ selinux sometimes puts a dot at the end:
78 # -rwxrw-r--. id1 id2 file1
79 # Also filter out lost+found directory on extN file system if present
83 ls -l $* | sed "s/\(^[-rwxdlbcpsStT]*\)\. /\1 /" | grep -v 'lost+found'
107 echo "$_err_msg" | tee -a $seqres.full
108 echo "(see $seqres.full for details)"
111 # make sure we have a standard umask
114 # check for correct setup and source the $FSTYP specific functions now
117 [ "$XFS_LOGPRINT_PROG" = "" ] && _fatal "xfs_logprint not found"
118 [ "$XFS_REPAIR_PROG" = "" ] && _fatal "xfs_repair not found"
119 [ "$XFS_DB_PROG" = "" ] && _fatal "xfs_db not found"
120 [ "$MKFS_XFS_PROG" = "" ] && _fatal "mkfs_xfs not found"
121 [ "$XFS_INFO_PROG" = "" ] && _fatal "xfs_info not found"
126 [ "$MKFS_UDF_PROG" = "" ] && _fatal "mkfs_udf/mkudffs not found"
129 [ "$MKFS_BTRFS_PROG" = "" ] && _fatal "mkfs.btrfs not found"
134 [ "$MKFS_EXT4_PROG" = "" ] && _fatal "mkfs.ext4 not found"
137 [ "$MKFS_F2FS_PROG" = "" ] && _fatal "mkfs.f2fs not found"
154 [ "$MKFS_REISER4_PROG" = "" ] && _fatal "mkfs.reiser4 not found"
159 [ "$UBIUPDATEVOL_PROG" = "" ] && _fatal "ubiupdatevol not found"
163 if [ ! -z "$REPORT_LIST" ]; then
173 # Get hugepagesize in bytes
176 local hugepgsz=$(awk '/Hugepagesize/ {print $2}' /proc/meminfo)
177 # Call _notrun if $hugepgsz is not a number
178 echo "$hugepgsz" | egrep -q ^[0-9]+$ || \
179 _notrun "Cannot get the value of Hugepagesize"
180 echo $((hugepgsz * 1024))
185 $MOUNT_PROG `_mount_ops_filter $*`
188 # Call _mount to do mount operation but also save mountpoint to
189 # MOUNTED_POINT_STACK. Note that the mount point must be the last parameter
192 local mnt_point=${!#}
193 local mnt_dev=${@:(-2):1}
194 local scratch_opts=""
195 if [ "$mnt_dev" = "$SCRATCH_DEV" ]; then
196 _scratch_options mount
197 scratch_opts="$SCRATCH_OPTIONS"
200 _mount $scratch_opts $*
201 if [ $? -eq 0 ]; then
202 # mount --move operation updates the mountpoint, so remove
203 # the old one and insert the new one
204 if [[ "$*" =~ --move|-M ]]; then
205 MOUNTED_POINT_STACK=`echo $MOUNTED_POINT_STACK | \
208 MOUNTED_POINT_STACK="$mnt_point $MOUNTED_POINT_STACK"
214 # Unmount the last mounted mountpoint in MOUNTED_POINT_STACK
215 # and return it to caller
218 local last_mnt=`echo $MOUNTED_POINT_STACK | awk '{print $1}'`
220 if [ -n "$last_mnt" ]; then
221 $UMOUNT_PROG $last_mnt
223 MOUNTED_POINT_STACK=`echo $MOUNTED_POINT_STACK | cut -d\ -f2-`
226 # Unmount all mountpoints in MOUNTED_POINT_STACK and clear the stack
229 if [ -n "$MOUNTED_POINT_STACK" ]; then
230 $UMOUNT_PROG $MOUNTED_POINT_STACK
232 MOUNTED_POINT_STACK=""
242 if [ "$FSTYP" != "xfs" ]; then
248 SCRATCH_OPTIONS="$SCRATCH_OPTIONS -f"
257 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_RTDEV" ] && \
258 SCRATCH_OPTIONS="$SCRATCH_OPTIONS ${rt_opt}rtdev=$SCRATCH_RTDEV"
259 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
260 SCRATCH_OPTIONS="$SCRATCH_OPTIONS ${log_opt}logdev=$SCRATCH_LOGDEV"
270 if [ "$FSTYP" != "xfs" ]; then
284 [ "$USE_EXTERNAL" = yes -a ! -z "$TEST_RTDEV" ] && \
285 TEST_OPTIONS="$TEST_OPTIONS ${rt_opt}rtdev=$TEST_RTDEV"
286 [ "$USE_EXTERNAL" = yes -a ! -z "$TEST_LOGDEV" ] && \
287 TEST_OPTIONS="$TEST_OPTIONS ${log_opt}logdev=$TEST_LOGDEV"
293 local last_index=$(( $# - 1 ))
295 #get mount point to handle dmapi mtpt option correctly
296 [ $last_index -gt 0 ] && shift $last_index
299 echo $params | sed -e 's/dmapi/dmi/' \
300 | $PERL_PROG -ne "s#mtpt=[^,|^\n|^\s]*#mtpt=$fs_escaped\1\2#; print;"
304 # Used for mounting non-scratch devices (e.g. loop, dm constructs)
305 # with the safe set of scratch mount options (e.g. loop image may be
306 # hosted on $SCRATCH_DEV, so can't use external scratch devices).
307 _common_dev_mount_options()
309 echo $MOUNT_OPTIONS $SELINUX_MOUNT_OPTIONS $*
312 _scratch_mount_options()
314 _scratch_options mount
316 echo `_common_dev_mount_options $*` $SCRATCH_OPTIONS \
317 $SCRATCH_DEV $SCRATCH_MNT
324 local fstyp=`$DF_PROG $dir | tail -1 | $AWK_PROG '{print $2}'`
327 $XFS_INFO_PROG $dir | grep -q "ftype=1"
330 local dev=`$DF_PROG $dir | tail -1 | $AWK_PROG '{print $1}'`
331 tune2fs -l $dev | grep -q filetype
334 local testfile=$dir/$$.ftype
336 # look for DT_UNKNOWN files
337 local unknowns=$($here/src/t_dir_type $dir u | wc -l)
339 # 0 unknowns is success
345 # mount scratch device with given options but don't check mount status
348 if [ "$FSTYP" == "overlay" ]; then
349 _overlay_scratch_mount $*
352 _mount -t $FSTYP `_scratch_mount_options $*`
355 # mount scratch device with given options and _fail if mount fails
358 _try_scratch_mount $* || _fail "mount failed"
365 _overlay_scratch_unmount
368 $UMOUNT_PROG $SCRATCH_MNT
371 $UMOUNT_PROG $SCRATCH_DEV
380 if test -n "$opts"; then
381 _try_scratch_mount "-o remount,$opts"
385 _scratch_cycle_mount()
389 if [ "$FSTYP" = tmpfs ]; then
390 _scratch_remount "$opts"
393 if test -n "$opts"; then
397 _try_scratch_mount "$opts" || _fail "cycle mount failed"
402 if [ $FSTYP = "overlay" ]; then
403 # In lagacy overlay usage, it may specify directory as
404 # SCRATCH_DEV, in this case OVL_BASE_SCRATCH_DEV
405 # will be null, so check OVL_BASE_SCRATCH_DEV before
406 # running shutdown to avoid shutting down base fs accidently.
407 if [ -z $OVL_BASE_SCRATCH_DEV ]; then
408 _fail "_scratch_shutdown: call _require_scratch_shutdown first in test"
410 $here/src/godown $* $OVL_BASE_SCRATCH_MNT
413 $here/src/godown $* $SCRATCH_MNT
417 # Return a file path that can be used to shut down the scratch filesystem.
418 # Caller should _require_scratch_shutdown before using this.
419 _scratch_shutdown_handle()
421 if [ $FSTYP = "overlay" ]; then
422 echo $OVL_BASE_SCRATCH_MNT
430 if [ "$FSTYP" == "overlay" ]; then
431 _overlay_test_mount $*
435 _mount -t $FSTYP $TEST_OPTIONS $TEST_FS_MOUNT_OPTS $SELINUX_MOUNT_OPTIONS $* $TEST_DEV $TEST_DIR
440 if [ "$FSTYP" == "overlay" ]; then
441 _overlay_test_unmount
443 $UMOUNT_PROG $TEST_DEV
449 if [ "$FSTYP" = tmpfs ]; then
456 _scratch_mkfs_options()
458 _scratch_options mkfs
459 echo $SCRATCH_OPTIONS $MKFS_OPTIONS $* $SCRATCH_DEV
462 # Do the actual mkfs work on SCRATCH_DEV. Firstly mkfs with both MKFS_OPTIONS
463 # and user specified mkfs options, if that fails (due to conflicts between mkfs
464 # options), do a second mkfs with only user provided mkfs options.
466 # First param is the mkfs command without any mkfs options and device.
467 # Second param is the filter to remove unnecessary messages from mkfs stderr.
468 # Other extra mkfs options are followed.
474 local extra_mkfs_options=$*
476 local tmp=`mktemp -u`
478 # save mkfs output in case conflict means we need to run again.
479 # only the output for the mkfs that applies should be shown
480 eval "$mkfs_cmd $MKFS_OPTIONS $extra_mkfs_options $SCRATCH_DEV" \
481 2>$tmp.mkfserr 1>$tmp.mkfsstd
484 # a mkfs failure may be caused by conflicts between $MKFS_OPTIONS and
485 # $extra_mkfs_options
486 if [ $mkfs_status -ne 0 -a -n "$extra_mkfs_options" ]; then
488 echo -n "** mkfs failed with extra mkfs options "
489 echo "added to \"$MKFS_OPTIONS\" by test $seq **"
490 echo -n "** attempting to mkfs using only test $seq "
491 echo "options: $extra_mkfs_options **"
494 # running mkfs again. overwrite previous mkfs output files
495 eval "$mkfs_cmd $extra_mkfs_options $SCRATCH_DEV" \
496 2>$tmp.mkfserr 1>$tmp.mkfsstd
500 # output stored mkfs output, filtering unnecessary output from stderr
502 eval "cat $tmp.mkfserr | $mkfs_filter" >&2
504 rm -f $tmp.mkfserr $tmp.mkfsstd
514 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
515 options="-l $SCRATCH_LOGDEV"
517 xfs_metadump $options "$@" $SCRATCH_DEV $dumpfile
520 _setup_large_ext4_fs()
525 [ "$LARGE_SCRATCH_DEV" != yes ] && return 0
526 [ -z "$SCRATCH_DEV_EMPTY_SPACE" ] && SCRATCH_DEV_EMPTY_SPACE=0
527 [ $SCRATCH_DEV_EMPTY_SPACE -ge $fs_size ] && return 0
529 # Default free space in the FS is 50GB, but you can specify more via
530 # SCRATCH_DEV_EMPTY_SPACE
531 local space_to_consume=$(($fs_size - 50*1024*1024*1024 - $SCRATCH_DEV_EMPTY_SPACE))
533 # mount the filesystem and create 16TB - 4KB files until we consume
534 # all the necessary space.
535 _try_scratch_mount 2>&1 >$tmp_dir/mnt.err
537 if [ $status -ne 0 ]; then
539 cat $tmp_dir/mnt.err >&2
540 rm -f $tmp_dir/mnt.err
543 rm -f $tmp_dir/mnt.err
545 local file_size=$((16*1024*1024*1024*1024 - 4096))
547 while [ $space_to_consume -gt $file_size ]; do
550 -c "truncate $file_size" \
551 -c "falloc -k 0 $file_size" \
552 $SCRATCH_MNT/.use_space.$nfiles 2>&1
554 if [ $status -ne 0 ]; then
558 space_to_consume=$(( $space_to_consume - $file_size ))
559 nfiles=$(($nfiles + 1))
562 # consume the remaining space.
563 if [ $space_to_consume -gt 0 ]; then
565 -c "truncate $space_to_consume" \
566 -c "falloc -k 0 $space_to_consume" \
567 $SCRATCH_MNT/.use_space.$nfiles 2>&1
570 export NUM_SPACE_FILES=$nfiles
573 if [ $status -ne 0 ]; then
574 echo "large file prealloc failed"
575 cat $tmp_dir/mnt.err >&2
583 local mkfs_cmd="$MKFS_EXT4_PROG -F"
584 local mkfs_filter="grep -v -e ^Warning: -e \"^mke2fs \" | grep -v \"^$\""
585 local tmp=`mktemp -u`
588 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
589 $mkfs_cmd -O journal_dev $MKFS_OPTIONS $SCRATCH_LOGDEV && \
590 mkfs_cmd="$mkfs_cmd -J device=$SCRATCH_LOGDEV"
592 _scratch_do_mkfs "$mkfs_cmd" "$mkfs_filter" $* 2>$tmp.mkfserr 1>$tmp.mkfsstd
595 if [ $mkfs_status -eq 0 -a "$LARGE_SCRATCH_DEV" = yes ]; then
596 # manually parse the mkfs output to get the fs size in bytes
597 local fs_size=`cat $tmp.mkfsstd | awk ' \
598 /^Block size/ { split($2, a, "="); bs = a[2] ; } \
599 / inodes, / { blks = $3 } \
600 /reserved for the super user/ { resv = $1 } \
601 END { fssize = bs * blks - resv; print fssize }'`
603 _setup_large_ext4_fs $fs_size
607 # output mkfs stdout and stderr
610 rm -f $tmp.mkfserr $tmp.mkfsstd
622 # do nothing for cifs
628 # do nothing for virtiofs
631 # do nothing for ceph
634 # do nothing for glusterfs
637 # do nothing for overlay
640 # do nothing for pvfs2
643 $MKFS_UDF_PROG $MKFS_OPTIONS $* $TEST_DEV > /dev/null
646 $MKFS_BTRFS_PROG $MKFS_OPTIONS $* $TEST_DEV > /dev/null
649 $MKFS_PROG -t $FSTYP -- -F $MKFS_OPTIONS $* $TEST_DEV
652 yes | $MKFS_PROG -t $FSTYP -- $MKFS_OPTIONS $* $TEST_DEV
659 local tmp=`mktemp -u`
668 # do nothing for virtiofs
671 # do nothing for overlay
674 # do nothing for pvfs2
677 $MKFS_UDF_PROG $MKFS_OPTIONS $* 2>$tmp.mkfserr 1>$tmp.mkfsstd
680 $MKFS_BTRFS_PROG $MKFS_OPTIONS $* 2>$tmp.mkfserr 1>$tmp.mkfsstd
683 $MKFS_PROG -t $FSTYP -- -F $MKFS_OPTIONS $* \
684 2>$tmp.mkfserr 1>$tmp.mkfsstd
687 $MKFS_PROG -t $FSTYP -- -f $MKFS_OPTIONS $* \
688 2>$tmp.mkfserr 1>$tmp.mkfsstd
691 yes | $MKFS_PROG -t $FSTYP -- $MKFS_OPTIONS $* \
692 2>$tmp.mkfserr 1>$tmp.mkfsstd
696 if [ $? -ne 0 ]; then
697 # output stored mkfs output
703 rm -f $tmp.mkfserr $tmp.mkfsstd
706 # remove all files in $SCRATCH_MNT, useful when testing on NFS/CIFS
707 _scratch_cleanup_files()
711 # Avoid rm -rf /* if we messed up
712 [ -n "$OVL_BASE_SCRATCH_MNT" ] || return 1
713 _overlay_base_scratch_mount || return 1
714 rm -rf $OVL_BASE_SCRATCH_MNT/* || return 1
715 _overlay_mkdirs $OVL_BASE_SCRATCH_MNT
716 # leave base fs mouted so tests can setup lower/upper dir files
719 [ -n "$SCRATCH_MNT" ] || return 1
721 rm -rf $SCRATCH_MNT/*
734 nfs*|cifs|ceph|overlay|glusterfs|pvfs2|9p|virtiofs)
735 # unable to re-create this fstyp, just remove all files in
736 # $SCRATCH_MNT to avoid EEXIST caused by the leftover files
737 # created in previous runs
738 _scratch_cleanup_files
742 # do nothing for tmpfs
746 # erase the UBI volume; reformated automatically on next mount
747 $UBIUPDATEVOL_PROG ${SCRATCH_DEV} -t
751 _scratch_mkfs_ext4 $*
759 mkfs_cmd="$MKFS_UDF_PROG"
763 mkfs_cmd="$MKFS_BTRFS_PROG"
767 mkfs_cmd="$MKFS_PROG -t $FSTYP -- -F"
768 mkfs_filter="grep -v -e ^Warning: -e \"^mke2fs \""
770 # put journal on separate device?
771 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
772 $mkfs_cmd -O journal_dev $MKFS_OPTIONS $SCRATCH_LOGDEV && \
773 mkfs_cmd="$mkfs_cmd -J device=$SCRATCH_LOGDEV"
776 mkfs_cmd="$MKFS_PROG -t $FSTYP -- -F"
777 mkfs_filter="grep -v -e ^Warning: -e \"^mke2fs \""
780 mkfs_cmd="$MKFS_F2FS_PROG"
784 mkfs_cmd="yes | $MKFS_PROG -t $FSTYP --"
785 mkfs_filter="grep -v -e ^mkfs\.ocfs2"
788 mkfs_cmd="yes | $MKFS_PROG -t $FSTYP --"
793 _scratch_do_mkfs "$mkfs_cmd" "$mkfs_filter" $*
797 # Helper function to get a spare or replace-target device from
798 # configured SCRATCH_DEV_POLL, must call _scratch_dev_pool_get()
799 # before _spare_dev_get(). Replace-target-device/Spare-device will
800 # be assigned to SPARE_DEV.
801 # As of now only one replace-target-device/spare-device can be
805 # _scratch_dev_pool_get() <ndevs>
809 # _scratch_dev_pool_put()
813 typeset -p SCRATCH_DEV_POOL_SAVED >/dev/null 2>&1
814 if [ $? -ne 0 ]; then
815 _fail "Bug: unset val, must call _scratch_dev_pool_get before _spare_dev_get"
818 if [ -z "$SCRATCH_DEV_POOL_SAVED" ]; then
819 _fail "Bug: str empty, must call _scratch_dev_pool_get before _spare_dev_get"
822 # Check if the spare is already assigned
823 typeset -p SPARE_DEV >/dev/null 2>&1
824 if [ $? -eq 0 ]; then
825 if [ ! -z "$SPARE_DEV" ]; then
826 _fail "Bug: SPARE_DEV = $SPARE_DEV already assigned"
830 local ndevs=`echo $SCRATCH_DEV_POOL| wc -w`
831 local config_ndevs=`echo $SCRATCH_DEV_POOL_SAVED| wc -w`
833 if [ $ndevs -eq $config_ndevs ]; then
834 _notrun "All devs used no spare"
836 # Get a dev that is not used
837 local -a devs="( $SCRATCH_DEV_POOL_SAVED )"
838 SPARE_DEV=${devs[@]:$ndevs:1}
844 typeset -p SPARE_DEV >/dev/null 2>&1
845 if [ $? -ne 0 ]; then
846 _fail "Bug: unset val, must call _spare_dev_get before its put"
849 if [ -z "$SPARE_DEV" ]; then
850 _fail "Bug: str empty, must call _spare_dev_get before its put"
857 # Generally test cases will have..
858 # _require_scratch_dev_pool X
859 # to make sure it has the enough scratch devices including
860 # replace-target and spare device. Now arg1 here is the
861 # required number of scratch devices by a-test-case excluding
862 # the replace-target and spare device. So this function will
863 # set SCRATCH_DEV_POOL to the specified number of devices.
866 # _scratch_dev_pool_get() <ndevs>
869 # _scratch_dev_pool_put()
871 _scratch_dev_pool_get()
873 if [ $# -ne 1 ]; then
874 _fail "Usage: _scratch_dev_pool_get ndevs"
878 local config_ndevs=`echo $SCRATCH_DEV_POOL| wc -w`
879 local -a devs="( $SCRATCH_DEV_POOL )"
881 typeset -p config_ndevs >/dev/null 2>&1
882 if [ $? -ne 0 ]; then
883 _fail "Bug: cant find SCRATCH_DEV_POOL ndevs"
886 if [ $config_ndevs -lt $test_ndevs ]; then
887 _notrun "Need at least test requested number of ndevs $test_ndevs"
890 SCRATCH_DEV_POOL_SAVED=${SCRATCH_DEV_POOL}
891 export SCRATCH_DEV_POOL_SAVED
892 SCRATCH_DEV_POOL=${devs[@]:0:$test_ndevs}
893 export SCRATCH_DEV_POOL
896 _scratch_dev_pool_put()
898 typeset -p SCRATCH_DEV_POOL_SAVED >/dev/null 2>&1
899 if [ $? -ne 0 ]; then
900 _fail "Bug: unset val, must call _scratch_dev_pool_get before _scratch_dev_pool_put"
903 if [ -z "$SCRATCH_DEV_POOL_SAVED" ]; then
904 _fail "Bug: str empty, must call _scratch_dev_pool_get before _scratch_dev_pool_put"
907 export SCRATCH_DEV_POOL=$SCRATCH_DEV_POOL_SAVED
908 export SCRATCH_DEV_POOL_SAVED=""
915 $MKFS_BTRFS_PROG $MKFS_OPTIONS $* $SCRATCH_DEV_POOL > /dev/null
918 echo "_scratch_pool_mkfs is not implemented for $FSTYP" 1>&2
923 # Return the amount of free memory available on the system
926 free -b | grep ^Mem | awk '{print $4}'
929 _available_memory_bytes()
931 nf=`free -b | grep ^Mem | awk '{print NF}'`
932 if [[ nf -lt 7 ]]; then
933 # Doesn't have available field. Fallback.
936 free -b | grep ^Mem | awk '{print $7}'
940 # Create fs of certain size on scratch device
941 # _scratch_mkfs_sized <size in bytes> [optional blocksize]
942 _scratch_mkfs_sized()
950 def_blksz=`echo $MKFS_OPTIONS|sed -rn 's/.*-b ?size= ?+([0-9]+).*/\1/p'`
952 ext2|ext3|ext4|ext4dev|udf|btrfs|reiser4|ocfs2|reiserfs)
953 def_blksz=`echo $MKFS_OPTIONS| sed -rn 's/.*-b ?+([0-9]+).*/\1/p'`
960 [ -n "$def_blksz" ] && blocksize=$def_blksz
961 [ -z "$blocksize" ] && blocksize=4096
965 if ! [[ $fssize =~ $re ]] ; then
966 _notrun "error: _scratch_mkfs_sized: fs size \"$fssize\" not an integer."
968 if ! [[ $blocksize =~ $re ]] ; then
969 _notrun "error: _scratch_mkfs_sized: block size \"$blocksize\" not an integer."
972 local blocks=`expr $fssize / $blocksize`
974 if [ "$HOSTOS" == "Linux" -a -b "$SCRATCH_DEV" ]; then
975 local devsize=`blockdev --getsize64 $SCRATCH_DEV`
976 [ "$fssize" -gt "$devsize" ] && _notrun "Scratch device too small"
981 # don't override MKFS_OPTIONS that set a block size.
982 echo $MKFS_OPTIONS |egrep -q "b?size="
983 if [ $? -eq 0 ]; then
984 _scratch_mkfs_xfs -d size=$fssize
986 _scratch_mkfs_xfs -d size=$fssize -b size=$blocksize
989 ext2|ext3|ext4|ext4dev)
990 ${MKFS_PROG}.$FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
993 # mkfs.gfs2 doesn't automatically shrink journal files on small
994 # filesystems, so the journal files may end up being bigger than the
995 # filesystem, which will cause mkfs.gfs2 to fail. Until that's fixed,
996 # shrink the journal size to at most one eigth of the filesystem and at
997 # least 8 MiB, the minimum size allowed.
998 local min_journal_size=8
999 local default_journal_size=128
1000 if (( fssize/8 / (1024*1024) < default_journal_size )); then
1001 local journal_size=$(( fssize/8 / (1024*1024) ))
1002 (( journal_size >= min_journal_size )) || journal_size=$min_journal_size
1003 MKFS_OPTIONS="-J $journal_size $MKFS_OPTIONS"
1005 ${MKFS_PROG}.$FSTYP $MKFS_OPTIONS -O -b $blocksize $SCRATCH_DEV $blocks
1008 yes | ${MKFS_PROG}.$FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
1011 $MKFS_UDF_PROG $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
1015 # minimum size that's needed without the mixed option.
1016 # Ref: btrfs-prog: btrfs_min_dev_size()
1017 # Non mixed mode is also the default option.
1018 (( fssize < $((256 * 1024 *1024)) )) && mixed_opt='--mixed'
1019 $MKFS_BTRFS_PROG $MKFS_OPTIONS $mixed_opt -b $fssize $SCRATCH_DEV
1022 ${MKFS_PROG}.$FSTYP $MKFS_OPTIONS $SCRATCH_DEV $blocks
1025 ${MKFS_PROG}.$FSTYP $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
1028 # mkfs.resier4 requires size in KB as input for creating filesystem
1029 $MKFS_REISER4_PROG $MKFS_OPTIONS -y -b $blocksize $SCRATCH_DEV \
1030 `expr $fssize / 1024`
1033 # mkfs.f2fs requires # of sectors as an input for the size
1034 local sector_size=`blockdev --getss $SCRATCH_DEV`
1035 $MKFS_F2FS_PROG $MKFS_OPTIONS $SCRATCH_DEV `expr $fssize / $sector_size`
1038 local free_mem=`_free_memory_bytes`
1039 if [ "$free_mem" -lt "$fssize" ] ; then
1040 _notrun "Not enough memory ($free_mem) for tmpfs with $fssize bytes"
1042 export MOUNT_OPTIONS="-o size=$fssize $TMPFS_MOUNT_OPTIONS"
1045 _notrun "Filesystem $FSTYP not supported in _scratch_mkfs_sized"
1050 # Emulate an N-data-disk stripe w/ various stripe units
1051 # _scratch_mkfs_geom <sunit bytes> <swidth multiplier> [optional blocksize]
1052 _scratch_mkfs_geom()
1054 local sunit_bytes=$1
1055 local swidth_mult=$2
1057 [ -z "$blocksize" ] && blocksize=4096
1059 local sunit_blocks=$(( sunit_bytes / blocksize ))
1060 local swidth_blocks=$(( sunit_blocks * swidth_mult ))
1064 if echo "$MKFS_OPTIONS" | egrep -q "b?size="; then
1065 MKFS_OPTIONS=$(echo "$MKFS_OPTIONS" | sed -r "s/(b?size=)[0-9]+/\1$blocksize/")
1067 MKFS_OPTIONS+=" -b size=$blocksize"
1070 if echo "$MKFS_OPTIONS" | egrep -q "(su|sunit|sw|swidth)="; then
1071 MKFS_OPTIONS=$(echo "$MKFS_OPTIONS" | sed -r \
1072 -e "s/(su|sunit)=[0-9kmg]+/su=$sunit_bytes/" \
1073 -e "s/(sw|swidth)=[0-9kmg]+/sw=$swidth_mult/")
1075 MKFS_OPTIONS+=" -d su=$sunit_bytes,sw=$swidth_mult"
1079 MKFS_OPTIONS+=" -b $blocksize -E stride=$sunit_blocks,stripe_width=$swidth_blocks"
1082 _notrun "can't mkfs $FSTYP with geometry"
1088 # Create fs of certain blocksize on scratch device
1089 # _scratch_mkfs_blocksized blocksize
1090 _scratch_mkfs_blocksized()
1095 if ! [[ $blocksize =~ $re ]] ; then
1096 _notrun "error: _scratch_mkfs_sized: block size \"$blocksize\" not an integer."
1101 _scratch_mkfs_xfs $MKFS_OPTIONS -b size=$blocksize
1104 ${MKFS_PROG}.$FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV
1107 ${MKFS_PROG}.$FSTYP $MKFS_OPTIONS -O -b $blocksize $SCRATCH_DEV
1110 yes | ${MKFS_PROG}.$FSTYP -F $MKFS_OPTIONS -b $blocksize -C $blocksize $SCRATCH_DEV
1113 _notrun "Filesystem $FSTYP not supported in _scratch_mkfs_blocksized"
1122 xfs_io -x -c "resblks $1" $SCRATCH_MNT
1130 # Repair scratch filesystem. Returns 0 if the FS is good to go (either no
1131 # errors found or errors were fixed) and nonzero otherwise; also spits out
1132 # a complaint on stderr if fsck didn't tell us that the FS is good to go.
1133 _repair_scratch_fs()
1137 _scratch_xfs_repair "$@" 2>&1
1139 if [ "$res" -ne 0 ]; then
1140 echo "xfs_repair returns $res; replay log?"
1143 if [ "$res" -gt 0 ]; then
1144 echo "mount returns $res; zap log?"
1145 _scratch_xfs_repair -L 2>&1
1146 echo "log zap returns $?"
1148 umount "$SCRATCH_MNT"
1150 _scratch_xfs_repair "$@" 2>&1
1153 if [ $res -ne 0 ]; then
1154 _dump_err2 "xfs_repair failed, err=$res"
1159 local dev=$SCRATCH_DEV
1161 if [ $FSTYP = "overlay" -a -n "$OVL_BASE_SCRATCH_DEV" ]; then
1162 _repair_overlay_scratch_fs
1163 # Fall through to repair base fs
1164 dev=$OVL_BASE_SCRATCH_DEV
1165 fstyp=$OVL_BASE_FSTYP
1166 $UMOUNT_PROG $OVL_BASE_SCRATCH_MNT
1168 # Let's hope fsck -y suffices...
1169 fsck -t $fstyp -y $dev 2>&1
1172 $FSCK_OK|$FSCK_NONDESTRUCT|$FSCK_REBOOT)
1176 _dump_err2 "fsck.$FSTYP failed, err=$res"
1188 echo "Usage: _get_pids_by_name process-name" 1>&2
1192 # Algorithm ... all ps(1) variants have a time of the form MM:SS or
1193 # HH:MM:SS before the psargs field, use this as the search anchor.
1195 # Matches with $1 (process-name) occur if the first psarg is $1
1196 # or ends in /$1 ... the matching uses sed's regular expressions,
1197 # so passing a regex into $1 will work.
1202 -e 's/[ ][ ]*/ /g' \
1205 -e "/[0-9]:[0-9][0-9] *[^ ]*\/$1 /s/ .*//p" \
1206 -e "/[0-9]:[0-9][0-9] *$1 /s/ .*//p"
1210 # _df_device : get an IRIX style df line for a given device
1212 # - returns "" if not mounted
1213 # - returns fs type in field two (ala IRIX)
1214 # - joins line together if split by fancy df formatting
1215 # - strips header etc
1222 echo "Usage: _df_device device" 1>&2
1226 # Note that we use "==" here so awk doesn't try to interpret an NFS over
1227 # IPv6 server as a regular expression.
1228 $DF_PROG 2>/dev/null | $AWK_PROG -v what=$1 '
1229 ($1==what) && (NF==1) {
1243 # _df_dir : get an IRIX style df line for device where a directory resides
1245 # - returns fs type in field two (ala IRIX)
1246 # - joins line together if split by fancy df formatting
1247 # - strips header etc
1254 echo "Usage: _df_dir device" 1>&2
1258 $DF_PROG $1 2>/dev/null | $AWK_PROG -v what=$1 '
1274 # return percentage used disk space for mounted device
1280 echo "Usage: _used device" 1>&2
1284 _df_device $1 | $AWK_PROG '{ sub("%", "") ; print $6 }'
1287 # return the FS type of a mounted device
1293 echo "Usage: _fs_type device" 1>&2
1298 # The Linux kernel shows NFSv4 filesystems in df output as
1299 # filesystem type nfs4, although we mounted it as nfs earlier.
1300 # Fix the filesystem type up here so that the callers don't
1301 # have to bother with this quirk.
1303 _df_device $1 | $AWK_PROG '{ print $2 }' | \
1304 sed -e 's/nfs4/nfs/' -e 's/fuse.glusterfs/glusterfs/'
1307 # return the FS mount options of a mounted device
1309 # should write a version which just parses the output of mount for IRIX
1310 # compatibility, but since this isn't used at all, at the moment I'll leave
1317 echo "Usage: _fs_options device" 1>&2
1321 $AWK_PROG -v dev=$1 '
1322 match($1,dev) { print $4 }
1326 # returns device number if a file is a block device
1332 echo "Usage: _is_block_dev dev" 1>&2
1337 if [ -L "$dev" ]; then
1338 dev=`readlink -f "$dev"`
1341 if [ -b "$dev" ]; then
1342 $here/src/lstat64 "$dev" | $AWK_PROG '/Device type:/ { print $9 }'
1346 # returns device number if a file is a character device
1350 if [ $# -ne 1 ]; then
1351 echo "Usage: _is_char_dev dev" 1>&2
1356 if [ -L "$dev" ]; then
1357 dev=`readlink -f "$dev"`
1360 if [ -c "$dev" ]; then
1361 $here/src/lstat64 "$dev" | $AWK_PROG '/Device type:/ { print $9 }'
1365 # Do a command, log it to $seqres.full, optionally test return status
1366 # and die if command fails. If called with one argument _do executes the
1367 # command, logs it, and returns its exit status. With two arguments _do
1368 # first prints the message passed in the first argument, and then "done"
1369 # or "fail" depending on the return status of the command passed in the
1370 # second argument. If the command fails and the variable _do_die_on_error
1371 # is set to "always" or the two argument form is used and _do_die_on_error
1372 # is set to "message_only" _do will print an error message to
1373 # $seqres.out and exit.
1377 if [ $# -eq 1 ]; then
1379 elif [ $# -eq 2 ]; then
1384 echo "Usage: _do [note] cmd" 1>&2
1388 (eval "echo '---' \"$cmd\"") >>$seqres.full
1389 (eval "$cmd") >$tmp._out 2>&1
1391 cat $tmp._out >>$seqres.full
1393 if [ $# -eq 2 ]; then
1394 if [ $ret -eq 0 ]; then
1401 && [ "$_do_die_on_error" = "always" \
1402 -o \( $# -eq 2 -a "$_do_die_on_error" = "message_only" \) ]
1404 [ $# -ne 2 ] && echo
1405 eval "echo \"$cmd\" failed \(returned $ret\): see $seqres.full"
1412 # bail out, setting up .notrun file. Need to kill the filesystem check files
1413 # here, otherwise they are set incorrectly for the next test.
1417 echo "$*" > $seqres.notrun
1418 echo "$seq not run: $*"
1419 rm -f ${RESULT_DIR}/require_test*
1420 rm -f ${RESULT_DIR}/require_scratch*
1426 # just plain bail out
1430 echo "$*" | tee -a $seqres.full
1431 echo "(see $seqres.full for details)"
1436 # tests whether $FSTYP is one of the supported filesystems for a test
1444 if [ "$f" = "$FSTYP" -o "$f" = "generic" ]
1450 _notrun "not suitable for this filesystem type: $FSTYP"
1454 # tests whether $FSTYP is one of the supported OSes for a test
1462 if [ "$h" = "$HOSTOS" ]
1468 _notrun "not suitable for this OS: $HOSTOS"
1471 # check if a FS on a device is mounted
1472 # if so, verify that it is mounted on mount point
1473 # if fstype is given as argument, verify that it is also
1474 # mounted with correct fs type
1484 # find $dev as the source, and print result in "$dev $mnt" format
1485 local mount_rec=`findmnt -rncv -S $dev -o SOURCE,TARGET`
1486 [ -n "$mount_rec" ] || return 1 # 1 = not mounted
1488 # if it's mounted, make sure its on $mnt
1489 if [ "$mount_rec" != "$dev $mnt" ]; then
1490 echo "$devname=$dev is mounted but not on $mntname=$mnt - aborting"
1491 echo "Already mounted result:"
1493 return 2 # 2 = mounted on wrong mnt
1496 if [ -n "$type" -a "`_fs_type $dev`" != "$type" ]; then
1497 echo "$devname=$dev is mounted but not a type $type filesystem"
1498 # raw $DF_PROG cannot handle NFS/CIFS/overlay correctly
1500 return 3 # 3 = mounted as wrong type
1502 return 0 # 0 = mounted as expected
1505 # this test needs a scratch partition - check we're ok & unmount it
1506 # No post-test check of the device is required. e.g. the test intentionally
1507 # finishes the test with the filesystem in a corrupt state
1508 _require_scratch_nocheck()
1512 echo $SCRATCH_DEV | egrep -q ":/?" > /dev/null 2>&1
1513 if [ -z "$SCRATCH_DEV" -o "$?" != "0" ]; then
1514 _notrun "this test requires a valid \$SCRATCH_DEV"
1516 if [ ! -d "$SCRATCH_MNT" ]; then
1517 _notrun "this test requires a valid \$SCRATCH_MNT"
1521 if [ -z "$SCRATCH_DEV" ]; then
1522 _notrun "this test requires a valid \$SCRATCH_DEV"
1524 if [ ! -d "$SCRATCH_MNT" ]; then
1525 _notrun "this test requires a valid \$SCRATCH_MNT"
1529 echo $SCRATCH_DEV | grep -q ":/" > /dev/null 2>&1
1530 if [ -z "$SCRATCH_DEV" -o "$?" != "0" ]; then
1531 _notrun "this test requires a valid \$SCRATCH_DEV"
1533 if [ ! -d "$SCRATCH_MNT" ]; then
1534 _notrun "this test requires a valid \$SCRATCH_MNT"
1538 echo $SCRATCH_DEV | grep -q "://" > /dev/null 2>&1
1539 if [ -z "$SCRATCH_DEV" -o "$?" != "0" ]; then
1540 _notrun "this test requires a valid \$SCRATCH_DEV"
1542 if [ ! -d "$SCRATCH_MNT" ]; then
1543 _notrun "this test requires a valid \$SCRATCH_MNT"
1547 echo $SCRATCH_DEV | grep -q "//" > /dev/null 2>&1
1548 if [ -z "$SCRATCH_DEV" -o "$?" != "0" ]; then
1549 _notrun "this test requires a valid \$SCRATCH_DEV"
1551 if [ ! -d "$SCRATCH_MNT" ]; then
1552 _notrun "this test requires a valid \$SCRATCH_MNT"
1556 if [ -z "$OVL_BASE_SCRATCH_MNT" -o ! -d "$OVL_BASE_SCRATCH_MNT" ]; then
1557 _notrun "this test requires a valid \$OVL_BASE_SCRATCH_MNT as ovl base dir"
1559 # if $SCRATCH_MNT is derived from $OVL_BASE_SCRATCH_MNT then
1560 # don't check $SCRATCH_MNT dir here because base fs may not be mounted
1561 # and we will create the mount point anyway on _overlay_mount
1562 if [ "$SCRATCH_MNT" != "$OVL_BASE_SCRATCH_MNT/$OVL_MNT" -a ! -d "$SCRATCH_MNT" ]; then
1563 _notrun "this test requires a valid \$SCRATCH_MNT"
1567 if [ -z "$SCRATCH_DEV" -o ! -d "$SCRATCH_MNT" ];
1569 _notrun "this test requires a valid \$SCRATCH_MNT and unique $SCRATCH_DEV"
1573 # ubifs needs an UBI volume. This will be a char device, not a block device.
1574 if [ ! -c "$SCRATCH_DEV" ]; then
1575 _notrun "this test requires a valid UBI volume for \$SCRATCH_DEV"
1577 if [ ! -d "$SCRATCH_MNT" ]; then
1578 _notrun "this test requires a valid \$SCRATCH_MNT"
1582 if [ -z "$SCRATCH_DEV" -o "`_is_block_dev "$SCRATCH_DEV"`" = "" ]
1584 _notrun "this test requires a valid \$SCRATCH_DEV"
1586 if [ "`_is_block_dev "$SCRATCH_DEV"`" = "`_is_block_dev "$TEST_DEV"`" ]
1588 _notrun "this test requires a valid \$SCRATCH_DEV"
1590 if [ ! -d "$SCRATCH_MNT" ]
1592 _notrun "this test requires a valid \$SCRATCH_MNT"
1597 _check_mounted_on SCRATCH_DEV $SCRATCH_DEV SCRATCH_MNT $SCRATCH_MNT
1599 [ $err -le 1 ] || exit 1
1602 # if it's mounted, unmount it
1603 if ! _scratch_unmount
1605 echo "failed to unmount $SCRATCH_DEV"
1609 rm -f ${RESULT_DIR}/require_scratch
1612 # we need the scratch device and it should be checked post test.
1615 _require_scratch_nocheck
1616 touch ${RESULT_DIR}/require_scratch
1619 # require a scratch dev of a minimum size (in kb)
1620 _require_scratch_size()
1622 [ $# -eq 1 ] || _fail "_require_scratch_size: expected size param"
1625 local devsize=`_get_device_size $SCRATCH_DEV`
1626 [ $devsize -lt $1 ] && _notrun "scratch dev too small"
1630 # this test needs a test partition - check we're ok & mount it
1636 echo $TEST_DEV | egrep -q ":/?" > /dev/null 2>&1
1637 if [ -z "$TEST_DEV" -o "$?" != "0" ]; then
1638 _notrun "this test requires a valid \$TEST_DEV"
1640 if [ ! -d "$TEST_DIR" ]; then
1641 _notrun "this test requires a valid \$TEST_DIR"
1645 if [ -z "$TEST_DEV" ]; then
1646 _notrun "this test requires a valid \$TEST_DEV"
1648 if [ ! -d "$TEST_DIR" ]; then
1649 _notrun "this test requires a valid \$TEST_DIR"
1653 echo $TEST_DEV | grep -q ":/" > /dev/null 2>&1
1654 if [ -z "$TEST_DEV" -o "$?" != "0" ]; then
1655 _notrun "this test requires a valid \$TEST_DEV"
1657 if [ ! -d "$TEST_DIR" ]; then
1658 _notrun "this test requires a valid \$TEST_DIR"
1662 echo $TEST_DEV | grep -q "//" > /dev/null 2>&1
1663 if [ -z "$TEST_DEV" -o "$?" != "0" ]; then
1664 _notrun "this test requires a valid \$TEST_DEV"
1666 if [ ! -d "$TEST_DIR" ]; then
1667 _notrun "this test requires a valid \$TEST_DIR"
1671 echo $TEST_DEV | grep -q "://" > /dev/null 2>&1
1672 if [ -z "$TEST_DEV" -o "$?" != "0" ]; then
1673 _notrun "this test requires a valid \$TEST_DIR"
1675 if [ ! -d "$TEST_DIR" ]; then
1676 _notrun "this test requires a valid \$TEST_DIR"
1680 if [ -z "$OVL_BASE_TEST_DIR" -o ! -d "$OVL_BASE_TEST_DIR" ]; then
1681 _notrun "this test requires a valid \$TEST_DIR as ovl base dir"
1683 if [ ! -d "$TEST_DIR" ]; then
1684 _notrun "this test requires a valid \$TEST_DIR"
1688 if [ -z "$TEST_DEV" -o ! -d "$TEST_DIR" ];
1690 _notrun "this test requires a valid \$TEST_DIR and unique $TEST_DEV"
1694 # ubifs needs an UBI volume. This will be a char device, not a block device.
1695 if [ ! -c "$TEST_DEV" ]; then
1696 _notrun "this test requires a valid UBI volume for \$TEST_DEV"
1698 if [ ! -d "$TEST_DIR" ]; then
1699 _notrun "this test requires a valid \$TEST_DIR"
1703 if [ -z "$TEST_DEV" ] || [ "`_is_block_dev "$TEST_DEV"`" = "" ]
1705 _notrun "this test requires a valid \$TEST_DEV"
1707 if [ "`_is_block_dev "$SCRATCH_DEV"`" = "`_is_block_dev "$TEST_DEV"`" ]
1709 _notrun "this test requires a valid \$TEST_DEV"
1711 if [ ! -d "$TEST_DIR" ]
1713 _notrun "this test requires a valid \$TEST_DIR"
1718 _check_mounted_on TEST_DEV $TEST_DEV TEST_DIR $TEST_DIR
1720 [ $err -le 1 ] || exit 1
1725 echo "!!! failed to mount $TEST_DEV on $TEST_DIR"
1729 touch ${RESULT_DIR}/require_test
1735 [ -z "$SCRATCH_LOGDEV" -o ! -b "$SCRATCH_LOGDEV" ] && ret=1
1736 [ "$USE_EXTERNAL" != yes ] && ret=1
1741 # this test needs a logdev
1745 [ -z "$SCRATCH_LOGDEV" -o ! -b "$SCRATCH_LOGDEV" ] && \
1746 _notrun "This test requires a valid \$SCRATCH_LOGDEV"
1747 [ "$USE_EXTERNAL" != yes ] && \
1748 _notrun "This test requires USE_EXTERNAL to be enabled"
1750 # ensure its not mounted
1751 $UMOUNT_PROG $SCRATCH_LOGDEV 2>/dev/null
1754 # this test requires loopback device support
1758 if [ "$HOSTOS" != "Linux" ]
1760 _notrun "This test requires linux for loopback device support"
1763 modprobe loop >/dev/null 2>&1
1764 if grep loop /proc/devices >/dev/null 2>&1
1768 _notrun "This test requires loopback device support"
1772 # this test requires ext2 filesystem support
1776 if [ "$HOSTOS" != "Linux" ]
1778 _notrun "This test requires linux for ext2 filesystem support"
1781 modprobe ext2 >/dev/null 2>&1
1782 if grep ext2 /proc/filesystems >/dev/null 2>&1
1786 _notrun "This test requires ext2 filesystem support"
1790 # this test requires tmpfs filesystem support
1794 modprobe tmpfs >/dev/null 2>&1
1795 grep -q tmpfs /proc/filesystems ||
1796 _notrun "this test requires tmpfs support"
1799 # this test requires that (large) loopback device files are not in use
1801 _require_no_large_scratch_dev()
1803 [ "$LARGE_SCRATCH_DEV" = yes ] && \
1804 _notrun "Large filesystem testing in progress, skipped this test"
1807 # this test requires that a realtime subvolume is in use, and
1808 # that the kernel supports realtime as well.
1812 [ "$USE_EXTERNAL" = yes ] || \
1813 _notrun "External volumes not in use, skipped this test"
1814 [ "$SCRATCH_RTDEV" = "" ] && \
1815 _notrun "Realtime device required, skipped this test"
1818 # This test requires that a realtime subvolume is not in use
1820 _require_no_realtime()
1822 [ "$USE_EXTERNAL" = "yes" ] && [ -n "$SCRATCH_RTDEV" ] && \
1823 _notrun "Test not compatible with realtime subvolumes, skipped this test"
1826 # this test requires that a specified command (executable) exists
1827 # $1 - command, $2 - name for error message
1829 # Note: the command string might have parameters, so strip them before checking
1830 # whether it is executable.
1833 if [ $# -eq 2 ]; then
1835 elif [ $# -eq 1 ]; then
1838 _fail "usage: _require_command <command> [<name>]"
1841 local command=`echo "$1" | awk '{ print $1 }'`
1842 if [ ! -x "$command" ]; then
1843 _notrun "$name utility required, skipped this test"
1847 # this test requires the device to be valid block device
1849 _require_block_device()
1851 if [ -z "$1" ]; then
1852 echo "Usage: _require_block_device <dev>" 1>&2
1855 if [ "`_is_block_dev "$1"`" == "" ]; then
1856 _notrun "require $1 to be valid block disk"
1860 # this test requires a path to refere to a local block or character device
1862 _require_local_device()
1864 if [ -z "$1" ]; then
1865 echo "Usage: _require_local_device <dev>" 1>&2
1868 if [ "`_is_block_dev "$1"`" != "" ]; then
1871 if [ "`_is_char_dev "$1"`" != "" ]; then
1874 _notrun "require $1 to be local device"
1877 # brd based ram disks erase the device when they receive a flush command when no
1878 # active references are present. This causes problems for DM devices sitting on
1879 # top of brd devices as DM doesn't hold active references to the brd device.
1880 _require_sane_bdev_flush()
1882 echo $1 | grep -q "^/dev/ram[0-9]\+$"
1883 if [ $? -eq 0 ]; then
1884 _notrun "This test requires a sane block device flush"
1888 # this test requires a specific device mapper target
1889 _require_dm_target()
1893 # require SCRATCH_DEV to be a valid block device with sane BLKFLSBUF
1895 _require_block_device $SCRATCH_DEV
1896 _require_sane_bdev_flush $SCRATCH_DEV
1897 _require_command "$DMSETUP_PROG" dmsetup
1899 _normalize_mount_options | egrep -q "dax(=always| |$)"
1900 if [ $? -eq 0 ]; then
1902 stripe|linear|log-writes)
1905 _notrun "Cannot run tests with DAX on $target devices."
1910 modprobe dm-$target >/dev/null 2>&1
1912 $DMSETUP_PROG targets 2>&1 | grep -q ^$target
1913 if [ $? -ne 0 ]; then
1914 _notrun "This test requires dm $target support"
1918 # this test requires the ext4 kernel support crc feature on scratch device
1920 _require_scratch_ext4_crc()
1922 _scratch_mkfs_ext4 >/dev/null 2>&1
1923 dumpe2fs -h $SCRATCH_DEV 2> /dev/null | grep -q metadata_csum || _notrun "metadata_csum not supported by this filesystem"
1924 _try_scratch_mount >/dev/null 2>&1 \
1925 || _notrun "Kernel doesn't support metadata_csum feature"
1929 # Check whether the specified feature whether it is supported by
1930 # mkfs.ext4 and the kernel.
1931 _require_scratch_ext4_feature()
1933 if [ -z "$1" ]; then
1934 echo "Usage: _require_scratch_ext4_feature feature"
1937 $MKFS_EXT4_PROG -F $MKFS_OPTIONS -O "$1" \
1938 $SCRATCH_DEV 512m >/dev/null 2>&1 \
1939 || _notrun "mkfs.ext4 doesn't support $1 feature"
1940 _try_scratch_mount >/dev/null 2>&1 \
1941 || _notrun "Kernel doesn't support the ext4 feature(s): $1"
1945 # this test requires that external log/realtime devices are not in use
1947 _require_nonexternal()
1949 [ "$USE_EXTERNAL" = yes ] && \
1950 _notrun "External device testing in progress, skipped this test"
1953 # this test requires that the kernel supports asynchronous I/O
1956 $here/src/feature -A
1961 _notrun "kernel does not support asynchronous I/O"
1964 _fail "unexpected error testing for asynchronous I/O support"
1969 # this test requires that a (specified) aio-dio executable exists
1970 # and that the kernel supports asynchronous I/O.
1971 # $1 - command (optional)
1977 AIO_TEST=$here/src/aio-dio-regress/aiodio_sparse2
1978 [ -x $AIO_TEST ] || _notrun "aio-dio utilities required"
1980 AIO_TEST=$here/src/aio-dio-regress/$1
1981 [ -x $AIO_TEST ] || _notrun "$AIO_TEST not built"
1987 # this test requires that a test program exists under src/
1988 # $1 - command (require)
1990 _require_test_program()
1992 local prog=$here/src/$1
1993 [ -x $prog ] || _notrun "$prog not built"
1996 # run an aio-dio program
2002 echo "usage: _run_aiodio command_name" 2>&1
2008 local testtemp=$TEST_DIR/aio-testfile
2010 $AIO_TEST $testtemp 2>&1
2017 _require_timestamp_range()
2019 local device=${1:-$TEST_DEV}
2022 read tsmin tsmax <<<$(_filesystem_timestamp_range $device)
2023 if [ $tsmin -eq -1 -a $tsmax -eq -1 ]; then
2024 _notrun "filesystem $FSTYP timestamp bounds are unknown"
2027 # expect console warning from rw scratch mount if fs limit is near
2028 if [ $tsmax -le $((1<<31)) ] && \
2029 ! _check_dmesg_for "filesystem being mounted at .* supports timestamps until"
2031 _notrun "Kernel does not support timestamp limits"
2035 _filesystem_timestamp_range()
2037 local device=${1:-$TEST_DEV}
2038 local fstyp=${2:-$FSTYP}
2039 u32max=$(((1<<32)-1))
2041 s32max=$(((1<<31)-1))
2042 s64max=$(((1<<63)-1))
2047 echo "$s32min $s32max"
2050 if [ $(dumpe2fs -h $device 2>/dev/null | grep "Inode size:" | cut -d: -f2) -gt 128 ]; then
2051 printf "%d %d\n" $s32min 0x37fffffff
2053 echo "$s32min $s32max"
2061 echo "$s32min $s32max"
2064 echo "$s64min $s64max"
2067 if [ ! -z $OVL_BASE_FSTYP -a $OVL_BASE_FSTYP != "overlay" ]; then
2068 _filesystem_timestamp_range $OVL_BASE_TEST_DEV $OVL_BASE_FSTYP
2079 # indicate whether YP/NIS is active or not
2084 dn=$(domainname 2>/dev/null)
2085 local ypcat=$(type -P ypcat)
2086 local rpcinfo=$(type -P rpcinfo)
2087 test -n "${dn}" -a "${dn}" != "(none)" -a "${dn}" != "localdomain" -a -n "${ypcat}" -a -n "${rpcinfo}" && \
2088 "${rpcinfo}" -p localhost 2>/dev/null | grep -q ypbind
2092 # cat the password file
2096 [ $(_yp_active) -eq 0 ] && ypcat passwd
2100 # cat the group file
2104 [ $(_yp_active) -eq 0 ] && ypcat group
2108 # check for a user on the machine, fsgqa as default
2116 _cat_passwd | grep -q $qa_user
2117 [ "$?" == "0" ] || _notrun "$qa_user user not defined."
2118 echo /bin/true | su $qa_user
2119 [ "$?" == "0" ] || _notrun "$qa_user cannot execute commands."
2122 # check for a group on the machine, fsgqa as default
2130 _cat_group | grep -q $qa_group
2131 [ "$?" == "0" ] || _notrun "$qa_group group not defined."
2137 s,.*Permission\sdenied.*,Permission denied,;
2138 s,.*no\saccess\sto\stty.*,,;
2139 s,.*no\sjob\scontrol\sin\sthis\sshell.*,,;
2146 echo $1 | su -s /bin/bash $qa_user 2>&1 | _filter_user_do
2149 _require_xfs_io_command()
2153 echo "Usage: _require_xfs_io_command command [switch]" 1>&2
2159 local param_checked=""
2163 local testfile=$TEST_DIR/$$.xfs_io
2167 # Test xfs_io lsattr support and filesystem FS_IOC_FSSETXATTR
2169 testio=`$XFS_IO_PROG -F -f -c "lsattr $param" $testfile 2>&1`
2170 param_checked="$param"
2173 local testdir=$TEST_DIR/$$.attr_dir
2174 mkdir $TEST_DIR/$$.attr_dir
2175 if [ -z "$param" ]; then
2178 # Test xfs_io chattr support AND
2179 # filesystem FS_IOC_FSSETXATTR support
2180 # 'tPnE' flags are only valid for a directory so check them on a directory.
2181 if echo "$param" | egrep -q 't|P|n|E'; then
2182 testio=`$XFS_IO_PROG -F -c "chattr +$param" $testdir 2>&1`
2183 attr_info=`$XFS_IO_PROG -F -r -c "lsattr" $testdir | awk '{print $1}'`
2184 $XFS_IO_PROG -F -r -c "chattr -$param" $testdir 2>&1
2186 testio=`$XFS_IO_PROG -F -f -c "chattr +$param" $testfile 2>&1`
2187 attr_info=`$XFS_IO_PROG -F -r -c "lsattr" $testfile | awk '{print $1}'`
2188 $XFS_IO_PROG -F -r -c "chattr -$param" $testfile 2>&1
2190 param_checked="+$param"
2191 rm -rf $testdir 2>&1 > /dev/null
2194 testio=`$XFS_IO_PROG -F -f -c "chproj 0" $testfile 2>&1`
2197 local testcopy=$TEST_DIR/$$.copy.xfs_io
2198 local copy_opts=$testfile
2199 if [ "$param" == "-f" ]; then
2200 # source file is the open destination file
2202 copy_opts="0 -d 4k -l 4k"
2204 $XFS_IO_PROG -F -f -c "pwrite 0 4k" $testfile > /dev/null 2>&1
2205 testio=`$XFS_IO_PROG -F -f -c "copy_range $param $copy_opts" $testcopy 2>&1`
2206 rm -f $testcopy > /dev/null 2>&1
2207 param_checked="$param"
2210 testio=`$XFS_IO_PROG -F -f -c "falloc $param 0 1m" $testfile 2>&1`
2211 param_checked="$param"
2213 "fpunch" | "fcollapse" | "zero" | "fzero" | "finsert" | "funshare")
2214 local blocksize=$(_get_block_size $TEST_DIR)
2215 testio=`$XFS_IO_PROG -F -f -c "pwrite 0 $((5 * $blocksize))" \
2216 -c "fsync" -c "$command $blocksize $((2 * $blocksize))" \
2220 # If 'ranged' is passed as argument then we check to see if fiemap supports
2221 # ranged query params
2222 if echo "$param" | grep -q "ranged"; then
2223 param=$(echo "$param" | sed "s/ranged//")
2224 $XFS_IO_PROG -c "help fiemap" | grep -q "\[offset \[len\]\]"
2225 [ $? -eq 0 ] || _notrun "xfs_io $command ranged support is missing"
2227 testio=`$XFS_IO_PROG -F -f -c "pwrite 0 20k" -c "fsync" \
2228 -c "fiemap -v $param" $testfile 2>&1`
2229 param_checked="$param"
2232 local testlink=$TEST_DIR/$$.link.xfs_io
2233 testio=`$XFS_IO_PROG -F -f -c "flink $testlink" $testfile 2>&1`
2234 rm -f $testlink > /dev/null 2>&1
2237 # Check O_TMPFILE support in xfs_io, kernel and fs
2238 testio=`$XFS_IO_PROG -T -c quit $TEST_DIR 2>&1`
2239 echo $testio | egrep -q "invalid option|Is a directory" && \
2240 _notrun "xfs_io $command support is missing"
2241 echo $testio | grep -q "Operation not supported" && \
2242 _notrun "O_TMPFILE is not supported"
2245 testio=`$XFS_IO_PROG -f -c "fsmap" $testfile 2>&1`
2246 echo $testio | grep -q "Inappropriate ioctl" && \
2247 _notrun "xfs_io $command support is missing"
2250 testio=`$XFS_IO_PROG -c "label" $TEST_DIR 2>&1`
2253 # -c "open $f" is broken in xfs_io <= 4.8. Along with the fix,
2254 # a new -C flag was introduced to execute one shot commands.
2255 # Check for -C flag support as an indication for the bug fix.
2256 testio=`$XFS_IO_PROG -F -f -C "open $testfile" $testfile 2>&1`
2257 echo $testio | grep -q "invalid option" && \
2258 _notrun "xfs_io $command support is missing"
2261 # -N (RWF_NOWAIT) only works with direct vectored I/O writes
2262 local pwrite_opts=" "
2263 if [ "$param" == "-N" ]; then
2265 pwrite_opts+="-V 1 -b 4k"
2267 testio=`$XFS_IO_PROG -f $opts -c \
2268 "pwrite $pwrite_opts $param 0 4k" $testfile 2>&1`
2269 param_checked="$pwrite_opts $param"
2272 testio=`$XFS_IO_PROG -x -c "$command probe" $TEST_DIR 2>&1`
2273 echo $testio | grep -q "Inappropriate ioctl" && \
2274 _notrun "xfs_io $command support is missing"
2277 testio=`$XFS_IO_PROG -f -c "utimes 0 0 0 0" $testfile 2>&1`
2281 testio=`$XFS_IO_PROG -c "syncfs" $testfile 2>&1`
2284 testio=`$XFS_IO_PROG -c "help $command" 2>&1`
2287 rm -f $testfile 2>&1 > /dev/null
2288 echo $testio | grep -q "not found" && \
2289 _notrun "xfs_io $command $param_checked support is missing"
2290 echo $testio | grep -q "Operation not supported\|Inappropriate ioctl" && \
2291 _notrun "xfs_io $command $param_checked failed (old kernel/wrong fs?)"
2292 echo $testio | grep -q "Invalid" && \
2293 _notrun "xfs_io $command $param_checked failed (old kernel/wrong fs/bad args?)"
2294 echo $testio | grep -q "foreign file active" && \
2295 _notrun "xfs_io $command $param_checked not supported on $FSTYP"
2296 echo $testio | grep -q "Function not implemented" && \
2297 _notrun "xfs_io $command $param_checked support is missing (missing syscall?)"
2298 echo $testio | grep -q "unknown flag" && \
2299 _notrun "xfs_io $command $param_checked support is missing (unknown flag)"
2301 [ -n "$param" ] || return
2303 if [ -z "$param_checked" ]; then
2304 $XFS_IO_PROG -c "help $command" | grep -E -q "^ $param ([a-zA-Z_]+ )?--" || \
2305 _notrun "xfs_io $command doesn't support $param"
2307 # xfs_io could result in "command %c not supported" if it was
2308 # built on kernels not supporting pwritev2() calls
2309 echo $testio | grep -q "\(invalid option\|not supported\)" && \
2310 _notrun "xfs_io $command doesn't support $param"
2313 # On XFS, ioctl(FSSETXATTR)(called by xfs_io -c "chattr") maskes off unsupported
2314 # or invalid flags silently so need to check these flags by extra ioctl(FSGETXATTR)
2315 # (called by xfs_io -c "lsattr").
2316 # The following URL explains why we don't change the behavior of XFS.
2317 # https://www.spinics.net/lists/linux-xfs/msg44725.html
2318 if [ -n "$attr_info" -a "$FSTYP" = "xfs" ]; then
2320 for i in $(seq 0 $((num-1))); do
2321 echo $attr_info | grep -q "${param:$i:1}" || \
2322 _notrun "xfs_io $command +${param:$i:1} support is missing (unknown flag in kernel)"
2327 # check that kernel and filesystem support direct I/O
2330 if [ $FSTYP = "ext4" ] || [ $FSTYP = "f2fs" ] ; then
2331 if echo "$MOUNT_OPTIONS" | grep -q "test_dummy_encryption"; then
2332 _notrun "$FSTYP encryption doesn't support O_DIRECT"
2335 if [ $FSTYP = "ext4" ] ; then
2336 if echo "$MOUNT_OPTIONS" | grep -q "data=journal"; then
2337 _notrun "ext4 data journaling doesn't support O_DIRECT"
2340 local testfile=$TEST_DIR/$$.direct
2341 $XFS_IO_PROG -F -f -d -c "pwrite 0 20k" $testfile > /dev/null 2>&1
2342 if [ $? -ne 0 ]; then
2343 _notrun "O_DIRECT is not supported"
2345 rm -f $testfile 2>&1 > /dev/null
2348 _format_swapfile() {
2355 # Swap files must be nocow on Btrfs.
2356 $CHATTR_PROG +C "$fname" > /dev/null 2>&1
2357 _pwrite_byte 0x61 0 "$sz" "$fname" >> $seqres.full
2358 $MKSWAP_PROG "$fname" >> $seqres.full
2361 # Check that the filesystem supports swapfiles
2362 _require_scratch_swapfile()
2365 _require_command "$MKSWAP_PROG" "mkswap"
2367 _scratch_mkfs >/dev/null 2>&1
2369 # With mounting SELinux context(e.g. system_u:object_r:root_t:s0),
2370 # standard mkswap tried to reset the type of default context to
2371 # swapfile_t if it's not swapfile_t, and then it failed and returned
2372 # ENOTSUP expectedly as we don't want to create any SELinux attr on
2373 # purpose. standard mkswap ignored this relabel error by commit
2374 # d97dc0e of util-linux, but it still reported the error before
2375 # commit d97dc0e. We mount swapfile context directly to skip the
2377 [ -n "$SELINUX_MOUNT_OPTIONS" ] && export \
2378 SELINUX_MOUNT_OPTIONS="-o context=system_u:object_r:swapfile_t:s0"
2382 # Minimum size for mkswap is 10 pages
2383 _format_swapfile "$SCRATCH_MNT/swap" $(($(get_page_size) * 10))
2385 if ! swapon "$SCRATCH_MNT/swap" >/dev/null 2>&1; then
2387 _notrun "swapfiles are not supported"
2390 swapoff "$SCRATCH_MNT/swap" >/dev/null 2>&1
2394 # Check that a fs has enough free space (in 1024b blocks)
2399 local blocks=$2 # in units of 1024
2400 local gb=$(( blocks / 1024 / 1024 ))
2402 local free_blocks=`df -kP $mnt | grep -v Filesystem | awk '{print $4}'`
2403 [ $free_blocks -lt $blocks ] && \
2404 _notrun "This test requires at least ${gb}GB free on $mnt to run"
2408 # Check if the filesystem supports sparse files.
2410 # Unfortunately there is no better way to do this than a manual black list.
2412 _require_sparse_files()
2416 _notrun "Sparse files not supported by this filesystem type: $FSTYP"
2425 #boot_params always present in debugfs
2426 [ -d "$DEBUGFS_MNT/boot_params" ] || _notrun "Debugfs not mounted"
2429 _require_fail_make_request()
2431 [ -f "$DEBUGFS_MNT/fail_make_request/probability" ] \
2432 || _notrun "$DEBUGFS_MNT/fail_make_request \
2433 not found. Seems that CONFIG_FAULT_INJECTION_DEBUG_FS kernel config option not enabled"
2436 # Disable extent zeroing for ext4 on the given device
2437 _ext4_disable_extent_zeroout()
2439 local dev=${1:-$TEST_DEV}
2440 local sdev=`_short_dev $dev`
2442 [ -f /sys/fs/ext4/$sdev/extent_max_zeroout_kb ] && \
2443 echo 0 >/sys/fs/ext4/$sdev/extent_max_zeroout_kb
2446 # The default behavior of SEEK_HOLE is to always return EOF.
2447 # Filesystems that implement non-default behavior return the offset
2448 # of holes with SEEK_HOLE. There is no way to query the filesystem
2449 # of which behavior it is implementing.
2450 # We use this whitelist FSTYP, to set expectation and avoid silent
2451 # regression of filesystem seek hole behavior.
2454 _fstyp_has_non_default_seek_data_hole()
2463 btrfs|ext4|xfs|cifs|f2fs|gfs2|ocfs2|tmpfs)
2467 # NFSv2 and NFSv3 only support default behavior of SEEK_HOLE,
2468 # while NFSv4 supports non-default behavior
2469 local nfsvers=`_df_device $TEST_DEV | $AWK_PROG '{ print $2 }'`
2470 [ "$nfsvers" = "nfs4" ]
2474 if [ ! -z $OVL_BASE_FSTYP -a $OVL_BASE_FSTYP != "overlay" ]; then
2475 _fstyp_has_non_default_seek_data_hole $OVL_BASE_FSTYP
2478 # Assume that base fs has default behavior
2483 # by default fstyp has default SEEK_HOLE behavior;
2484 # if your fs has non-default behavior, add it to whitelist above!
2490 # Run seek sanity test with predefined expectation for SEEK_DATA/HOLE behavior
2491 _run_seek_sanity_test()
2494 if _fstyp_has_non_default_seek_data_hole; then
2497 $here/src/seek_sanity_test $testseekargs $*
2500 # Check if the file system supports seek_data/hole
2501 _require_seek_data_hole()
2503 local dev=${1:-$TEST_DEV}
2504 local testfile=$TEST_DIR/$$.seek
2505 local testseek=`$here/src/seek_sanity_test -t $testfile 2>&1`
2507 rm -f $testfile &>/dev/null
2508 echo $testseek | grep -q "Kernel does not support" && \
2509 _notrun "File system does not support llseek(2) SEEK_DATA/HOLE"
2510 # Disable extent zeroing for ext4 as that change where holes are
2512 if [ "$FSTYP" = "ext4" ]; then
2513 _ext4_disable_extent_zeroout $dev
2519 _require_test_program "runas"
2524 "$here/src/runas" "$@"
2527 _require_richacl_prog()
2529 _require_command "$GETRICHACL_PROG" getrichacl
2530 _require_command "$SETRICHACL_PROG" setrichacl
2533 _require_scratch_richacl_xfs()
2535 _scratch_mkfs_xfs_supported -m richacl=1 >/dev/null 2>&1 \
2536 || _notrun "mkfs.xfs doesn't have richacl feature"
2537 _scratch_mkfs_xfs -m richacl=1 >/dev/null 2>&1
2538 _try_scratch_mount >/dev/null 2>&1 \
2539 || _notrun "kernel doesn't support richacl feature on $FSTYP"
2543 _require_scratch_richacl_ext4()
2545 _scratch_mkfs -O richacl >/dev/null 2>&1 \
2546 || _notrun "can't mkfs $FSTYP with option -O richacl"
2547 _try_scratch_mount >/dev/null 2>&1 \
2548 || _notrun "kernel doesn't support richacl feature on $FSTYP"
2552 _require_scratch_richacl_support()
2555 $GETFATTR_PROG -n system.richacl >/dev/null 2>&1 \
2556 || _notrun "this test requires richacl support on \$SCRATCH_DEV"
2560 _require_scratch_richacl()
2563 xfs) _require_scratch_richacl_xfs
2565 ext4) _require_scratch_richacl_ext4
2568 _require_scratch_richacl_support
2570 *) _notrun "this test requires richacl support on \$SCRATCH_DEV"
2575 _scratch_mkfs_richacl()
2578 xfs) _scratch_mkfs_xfs -m richacl=1
2580 ext4) _scratch_mkfs -O richacl
2588 # check if the given device is mounted, if so, return mount point
2592 local fstype=${2:-$FSTYP}
2594 if [ $# -lt 1 ]; then
2595 echo "Usage: _is_dev_mounted <device> [fstype]" 1>&2
2599 findmnt -rncv -S $dev -t $fstype -o TARGET | head -1
2602 # check if the given dir is a mount point, if so, return mount point
2603 _is_dir_mountpoint()
2606 local fstype=${2:-$FSTYP}
2608 if [ $# -lt 1 ]; then
2609 echo "Uasge: _is_dir_mountpoint <dir> [fstype]" 1>&2
2613 findmnt -rncv -t $fstype -o TARGET $dir | head -1
2616 # remount a FS to a new mode (ro or rw)
2622 echo "Usage: _remount device ro/rw" 1>&2
2628 if ! mount -o remount,$mode $device
2630 echo "_remount: failed to remount filesystem on $device as $mode"
2635 # Run the appropriate repair/check on a filesystem
2637 # if the filesystem is mounted, it's either remounted ro before being
2638 # checked or it's unmounted and then remounted
2641 # If set, we remount ro instead of unmounting for fsck
2644 _umount_or_remount_ro()
2648 echo "Usage: _umount_or_remount_ro <device>" 1>&2
2653 local mountpoint=`_is_dev_mounted $device`
2655 if [ $USE_REMOUNT -eq 0 ]; then
2656 $UMOUNT_PROG $device
2663 _mount_or_remount_rw()
2665 if [ $# -ne 3 ]; then
2666 echo "Usage: _mount_or_remount_rw <opts> <dev> <mnt>" 1>&2
2673 if [ $USE_REMOUNT -eq 0 ]; then
2674 if [ "$FSTYP" != "overlay" ]; then
2675 _mount -t $FSTYP $mount_opts $device $mountpoint
2677 _overlay_mount $device $mountpoint
2679 if [ $? -ne 0 ]; then
2680 _dump_err "!!! failed to remount $device on $mountpoint"
2690 # Check a generic filesystem in no-op mode; this assumes that the
2691 # underlying fsck program accepts "-n" for a no-op (check-only) run,
2692 # and that it will still return an errno for corruption in this mode.
2694 # Filesystems which don't support this will need to define their
2695 # own check routine.
2697 _check_generic_filesystem()
2701 # If type is set, we're mounted
2702 local type=`_fs_type $device`
2705 if [ "$type" = "$FSTYP" ]
2708 local mountpoint=`_umount_or_remount_ro $device`
2711 fsck -t $FSTYP $FSCK_OPTIONS $device >$tmp.fsck 2>&1
2714 _log_err "_check_generic_filesystem: filesystem on $device is inconsistent"
2715 echo "*** fsck.$FSTYP output ***" >>$seqres.full
2716 cat $tmp.fsck >>$seqres.full
2717 echo "*** end fsck.$FSTYP output" >>$seqres.full
2725 echo "*** mount output ***" >>$seqres.full
2726 _mount >>$seqres.full
2727 echo "*** end mount output" >>$seqres.full
2728 elif [ "$type" = "$FSTYP" ]
2731 _mount_or_remount_rw "$MOUNT_OPTIONS" $device $mountpoint
2735 if [ $ok -eq 0 ]; then
2737 if [ "$iam" != "check" ]; then
2746 # Filter the knowen errors the UDF Verifier reports.
2747 _udf_test_known_error_filter()
2749 egrep -v "PVD 60 Error: Interchange Level: 1, Maximum Interchange Level: 0|FSD 28 Error: Interchange Level: 1, Maximum Interchange Level: 1,|PVD 72 Warning: Volume Set Identifier: \"\*IRIX UDF\",|Warning: [0-9]+ unused blocks NOT marked as unallocated."
2753 _check_udf_filesystem()
2755 [ "$DISABLE_UDF_TEST" == "1" ] && return
2757 if [ $# -ne 1 -a $# -ne 2 ]
2759 echo "Usage: _check_udf_filesystem device [last_block]" 1>&2
2763 if [ ! -x $here/src/udf_test ]
2765 echo "udf_test not installed, please download and build the Philips"
2766 echo "UDF Verification Software from http://www.extra.research.philips.com/udf/."
2767 echo "Then copy the udf_test binary to $here/src/."
2768 echo "If you do not wish to run udf_test then set environment variable DISABLE_UDF_TEST"
2775 if [ $# -eq 2 ]; then
2776 opt_arg="-lastvalidblock $(( $2 - 1 ))"
2779 rm -f $seqres.checkfs
2780 sleep 1 # Due to a problem with time stamps in udf_test
2781 $here/src/udf_test $opt_arg $device | tee $seqres.checkfs | egrep "Error|Warning" | \
2782 _udf_test_known_error_filter | \
2783 egrep -iv "Error count:.*[0-9]+.*total occurrences:.*[0-9]+|Warning count:.*[0-9]+.*total occurrences:.*[0-9]+" && \
2784 echo "Warning UDF Verifier reported errors see $seqres.checkfs." && return 1
2795 # no way to check consistency for nfs
2798 # no way to check consistency for cifs
2801 # no way to check consistency for 9p
2804 # no way to check consistency for virtiofs
2807 # no way to check consistency for CephFS
2810 # no way to check consistency for GlusterFS
2813 _check_overlay_test_fs
2818 # do nothing for now
2821 _check_btrfs_filesystem $TEST_DEV
2824 # no way to check consistency for tmpfs
2827 # there is no fsck program for ubifs yet
2830 _check_generic_filesystem $TEST_DEV
2837 local device=$SCRATCH_DEV
2838 [ $# -eq 1 ] && device=$1
2842 local scratch_log="none"
2843 local scratch_rt="none"
2844 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
2845 scratch_log="$SCRATCH_LOGDEV"
2847 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_RTDEV" ] && \
2848 scratch_rt="$SCRATCH_RTDEV"
2850 _check_xfs_filesystem $device $scratch_log $scratch_rt
2853 _check_udf_filesystem $device $udf_fsize
2856 # Don't know how to check an NFS filesystem, yet.
2859 # Don't know how to check a CIFS filesystem, yet.
2862 # no way to check consistency for 9p
2865 # no way to check consistency for virtiofs
2868 # no way to check consistency for CephFS
2871 # no way to check consistency for GlusterFS
2874 _check_overlay_scratch_fs
2879 _check_btrfs_filesystem $device
2882 # no way to check consistency for tmpfs
2885 # there is no fsck program for ubifs yet
2888 _check_generic_filesystem $device
2893 _full_fstyp_details()
2895 [ -z "$FSTYP" ] && FSTYP=xfs
2896 if [ $FSTYP = xfs ]; then
2897 if [ -d /proc/fs/xfs ]; then
2898 if grep -q 'debug 0' /proc/fs/xfs/stat; then
2899 FSTYP="$FSTYP (non-debug)"
2900 elif grep -q 'debug 1' /proc/fs/xfs/stat; then
2901 FSTYP="$FSTYP (debug)"
2904 if uname -a | grep -qi 'debug'; then
2905 FSTYP="$FSTYP (debug)"
2907 FSTYP="$FSTYP (non-debug)"
2914 _full_platform_details()
2917 local host=`hostname -s`
2918 local kernel=`uname -rv`
2919 local platform=`uname -m`
2920 echo "$os/$platform $host $kernel"
2925 if [ "`uname`" == "Linux" ]; then
2928 echo Unknown operating system: `uname`
2933 _link_out_file_named()
2936 local suffix=$(FEATURES="$features" perl -e '
2938 my $feature, $result, $suffix, $opts;
2940 foreach $feature (split(/,/, $ENV{"FEATURES"})) {
2941 $feathash{$feature} = 1;
2943 $result = "default";
2948 ($opts, $suffix) = split(/ *: */);
2949 foreach my $opt (split(/,/, $opts)) {
2950 if (!exists($feathash{$opt})) {
2963 ln -fs $(basename $1).$suffix $1
2970 if [ $# -eq 0 ]; then
2971 features="$(_get_os_name),$FSTYP"
2972 if [ -n "$MOUNT_OPTIONS" ]; then
2973 features=$features,${MOUNT_OPTIONS##"-o "}
2979 _link_out_file_named $seqfull.out "$features"
2988 # convert urandom incompressible data to compressible text data
2991 od /dev/urandom | dd iflag=fullblock ${*}
2994 #takes files, randomdata
3002 if [ $size -gt 0 ]; then
3003 if [ "$2" == "false" ]; then
3004 dd if=/dev/zero of=$file bs=1024 count=$size 2>&1 | _filter_dd
3005 elif [ "$2" == "comp" ]; then
3006 _ddt of=$file bs=1024 count=$size 2>&1 | _filter_dd
3008 dd if=/dev/urandom of=$file bs=1024 count=$size 2>&1 | _filter_dd
3015 # takes dirname, depth, randomdata
3018 local dirname=$1 depth=$2 randomdata=$3
3019 mkdir $dirname || die "mkdir $dirname failed"
3022 _nfiles $files $randomdata # files for this dir and data type
3024 [ $depth -eq 0 ] && return
3025 local deep=$(( depth - 1 )) # go 1 down
3027 [ $verbose = true ] && echo "descending, depth from leaves = $deep"
3030 while [ $d -lt $dirs ]
3032 _descend d$d $deep &
3038 # Populate a filesystem with inodes for performance experiments
3040 # usage: populate [-v] [-n ndirs] [-f nfiles] [-d depth] [-r root] [-s size] [-x]
3045 local dirs=5 # ndirs in each subdir till leaves
3046 local size=0 # sizeof files in K
3047 local files=100 # num files in _each_ subdir
3048 local depth=2 # depth of tree from root to leaves
3050 local root=root # path of initial root of directory tree
3051 local randomdata=false # -x data type urandom, zero or compressible
3055 while getopts "d:f:n:r:s:v:x:c" c
3064 x) randomdata=true;;
3065 c) randomdata=comp;;
3069 _descend $root $depth $randomdata
3074 [ $verbose = true ] && echo done
3077 # query whether the given file has the given inode flag set
3084 if $XFS_IO_PROG -r -c 'lsattr -v' "$file" | grep -q "$flag" ; then
3090 # query the given files extsize allocator hint in bytes (if any)
3097 blocks=`$XFS_IO_PROG -r -c 'stat' "$file" | \
3098 awk '/^xattr.extsize =/ { print $3 }'`
3099 [ -z "$blocks" ] && blocks="0"
3103 # scratch_dev_pool should contain the disks pool for the btrfs raid
3104 _require_scratch_dev_pool()
3109 if [ -z "$SCRATCH_DEV_POOL" ]; then
3110 _notrun "this test requires a valid \$SCRATCH_DEV_POOL"
3113 if [ -z "$1" ]; then
3119 # btrfs test case needs ndevs or more scratch_dev_pool; other FS not sure
3123 if [ "`echo $SCRATCH_DEV_POOL|wc -w`" -lt $ndevs ]; then
3124 _notrun "btrfs and this test needs $ndevs or more disks in SCRATCH_DEV_POOL"
3128 _notrun "dev_pool is not supported by fstype \"$FSTYP\""
3132 for i in $SCRATCH_DEV_POOL; do
3133 if [ "`_is_block_dev "$i"`" = "" ]; then
3134 _notrun "this test requires valid block disk $i"
3136 if [ "`_is_block_dev "$i"`" = "`_is_block_dev "$TEST_DEV"`" ]; then
3137 _notrun "$i is part of TEST_DEV, this test requires unique disks"
3139 if _mount | grep -q $i; then
3140 if ! $UMOUNT_PROG $i; then
3141 echo "failed to unmount $i - aborting"
3145 # to help better debug when something fails, we remove
3146 # traces of previous btrfs FS on the dev.
3147 dd if=/dev/zero of=$i bs=4096 count=100 > /dev/null 2>&1
3151 # ensure devices in SCRATCH_DEV_POOL are of the same size
3152 # must be called after _require_scratch_dev_pool
3153 _require_scratch_dev_pool_equal_size()
3159 # SCRATCH_DEV has been set to the first device in SCRATCH_DEV_POOL
3160 size=`_get_device_size $SCRATCH_DEV`
3161 for dev in $SCRATCH_DEV_POOL; do
3162 newsize=`_get_device_size $dev`
3163 if [ $size -ne $newsize ]; then
3164 _notrun "This test requires devices in SCRATCH_DEV_POOL have the same size"
3170 # Check that fio is present, and it is able to execute given jobfile
3175 _require_command "$FIO_PROG" fio
3176 if [ -z "$1" ]; then
3180 $FIO_PROG --warnings-fatal --showcmd $job >> $seqres.full 2>&1
3181 [ $? -eq 0 ] || _notrun "$FIO_PROG too old, see $seqres.full"
3184 # Does freeze work on this fs?
3187 xfs_freeze -f "$TEST_DIR" >/dev/null 2>&1
3189 xfs_freeze -u "$TEST_DIR" >/dev/null 2>&1
3190 [ $result -eq 0 ] || _notrun "$FSTYP does not support freezing"
3193 # Does NFS export work on this fs?
3196 _require_test_program "open_by_handle"
3197 mkdir -p "$TEST_DIR"/exportfs_test
3198 $here/src/open_by_handle -c "$TEST_DIR"/exportfs_test 2>&1 \
3199 || _notrun "$FSTYP does not support NFS export"
3203 # Does shutdown work on this fs?
3204 _require_scratch_shutdown()
3206 [ -x $here/src/godown ] || _notrun "src/godown executable not found"
3208 _scratch_mkfs > /dev/null 2>&1 || _notrun "_scratch_mkfs failed on $SCRATCH_DEV"
3211 if [ $FSTYP = "overlay" ]; then
3212 if [ -z $OVL_BASE_SCRATCH_DEV ]; then
3213 # In lagacy overlay usage, it may specify directory as
3214 # SCRATCH_DEV, in this case OVL_BASE_SCRATCH_DEV
3215 # will be null, so check OVL_BASE_SCRATCH_DEV before
3216 # running shutdown to avoid shutting down base fs accidently.
3217 _notrun "This test requires a valid $OVL_BASE_SCRATCH_DEV as ovl base fs"
3219 $here/src/godown -f $OVL_BASE_SCRATCH_MNT 2>&1 \
3220 || _notrun "Underlying filesystem does not support shutdown"
3223 $here/src/godown -f $SCRATCH_MNT 2>&1 \
3224 || _notrun "$FSTYP does not support shutdown"
3235 local attributes=$($XFS_IO_PROG -c 'statx -r' $target | awk '/stat.attributes / { print $3 }')
3236 if [ $exp_s_dax -eq 0 ]; then
3237 (( attributes & 0x2000 )) && echo "$target has unexpected S_DAX flag"
3239 (( attributes & 0x2000 )) || echo "$target doesn't have expected S_DAX flag"
3248 if [ $exp_xflag -eq 0 ]; then
3249 _test_inode_flag dax $target && echo "$target has unexpected FS_XFLAG_DAX flag"
3251 _test_inode_flag dax $target || echo "$target doesn't have expected FS_XFLAG_DAX flag"
3255 # Check if dax mount options are supported
3257 # $1 can be either 'dax=always' or 'dax'
3260 # Check for the new dax options (dax=inode, dax=always or dax=never)
3261 # by passing "dax=always".
3263 # Check for the old dax or new dax=always by passing "dax".
3265 # This only accepts 'dax=always' because dax=always, dax=inode and
3266 # dax=never are always supported together. So if the other options are
3267 # required checking for 'dax=always' indicates support for the other 2.
3269 # Return 0 if filesystem/device supports the specified dax option.
3270 # Return 1 if mount fails with the specified dax option.
3271 # Return 2 if /proc/mounts shows wrong dax option.
3272 _check_scratch_dax_mountopt()
3277 _scratch_mkfs > /dev/null 2>&1
3279 _try_scratch_mount "-o $option" > /dev/null 2>&1 || return 1
3281 if _fs_options $SCRATCH_DEV | egrep -q "dax(=always|,|$)"; then
3290 # Throw notrun if _check_scratch_dax_mountopt() returns a non-zero value.
3291 _require_scratch_dax_mountopt()
3295 _check_scratch_dax_mountopt "$mountopt"
3298 [ $res -eq 1 ] && _notrun "mount $SCRATCH_DEV with $mountopt failed"
3299 [ $res -eq 2 ] && _notrun "$SCRATCH_DEV $FSTYP does not support -o $mountopt"
3302 _require_dax_iflag()
3304 _require_xfs_io_command "chattr" "x"
3307 # Does norecovery support by this fs?
3308 _require_norecovery()
3310 _try_scratch_mount -o ro,norecovery || \
3311 _notrun "$FSTYP does not support norecovery"
3315 # Does this filesystem support metadata journaling?
3316 # We exclude ones here that don't; otherwise we assume that it does, so the
3317 # test will run, fail, and motivate someone to update this test for a new
3320 # It's possible that TEST_DEV and SCRATCH_DEV have different features (it'd be
3321 # odd, but possible) so check $TEST_DEV by default, but we can optionall pass
3323 _has_metadata_journaling()
3332 ext2|vfat|msdos|udf|exfat)
3333 echo "$FSTYP does not support metadata journaling"
3337 # ext4 could be mkfs'd without a journal...
3339 $DUMPE2FS_PROG -h $dev 2>&1 | grep -q has_journal || {
3340 echo "$FSTYP on $dev not configured with metadata journaling"
3343 # ext4 might not load a journal
3344 if _normalize_mount_options | grep -qw "noload"; then
3345 echo "mount option \"noload\" not allowed in this test"
3350 # metadata journaling check is based on base filesystem configurations
3351 # and because -overlay option saves those configurations to OVL_BASE_*,
3352 # adding restore/override the configurations before/after the check.
3353 if [ ! -z $OVL_BASE_FSTYP -a $OVL_BASE_FSTYP != "overlay" ]; then
3356 _overlay_config_restore
3357 _has_metadata_journaling
3359 _overlay_config_override
3362 echo "No metadata journaling support for legacy overlay setup"
3367 # by default we pass; if you need to, add your fs above!
3373 _require_metadata_journaling()
3375 local msg=$(_has_metadata_journaling $@)
3376 if [ -n "$msg" ]; then
3383 $XFS_IO_PROG -r -c "fiemap" $1 | tail -n +2 | grep -v hole | wc -l
3386 # Similar to _count_extents() but if any extent is shared multiples times in
3387 # the file (reflinked to different file offsets), it is accounted as 1 extent
3388 # instead of N extents.
3389 _count_exclusive_extents()
3391 $XFS_IO_PROG -r -c "fiemap" $1 | tail -n +2 | grep -v hole | \
3392 cut -d ' ' -f 3 | sort | uniq | wc -l
3397 $XFS_IO_PROG -r -c "fiemap" $1 | tail -n +2 | grep hole | wc -l
3400 _count_attr_extents()
3402 $XFS_IO_PROG -c "fiemap -a" $1 | tail -n +2 | grep -v hole | wc -l
3405 # arg 1 is dev to remove and is output of the below eg.
3406 # ls -l /sys/class/block/sdd | rev | cut -d "/" -f 3 | rev
3412 echo 1 > /sys/class/scsi_device/${lun}/device/delete || _fail "Remove disk failed"
3414 stat $disk > /dev/null 2>&1
3415 while [ $? -eq 0 ]; do
3417 stat $disk > /dev/null 2>&1
3421 # arg 1 is dev to add and is output of the below eg.
3422 # ls -l /sys/class/block/sdd | rev | cut -d "/" -f 3 | rev
3427 # arg 1 will be in h:t:d:l format now in the h and "t d l" format
3428 h=`echo ${1} | cut -d":" -f 1`
3429 tdl=`echo ${1} | cut -d":" -f 2-|sed 's/:/ /g'`
3431 echo ${tdl} > /sys/class/scsi_host/host${h}/scan || _fail "Add disk failed"
3433 # ensure the device comes online
3434 local dev_back_oneline=0
3436 for i in `seq 1 10`; do
3437 if [ -d /sys/class/scsi_device/${1}/device/block ]; then
3438 local dev=`ls /sys/class/scsi_device/${1}/device/block`
3440 for j in `seq 1 10`;
3442 stat /dev/$dev > /dev/null 2>&1
3443 if [ $? -eq 0 ]; then
3454 if [ $dev_back_oneline -eq 0 ]; then
3455 echo "/dev/$dev online failed" >> $seqres.full
3457 echo "/dev/$dev is back online" >> $seqres.full
3463 if [ -z "$FSTRIM_PROG" ]; then
3464 _notrun "This test requires fstrim utility."
3468 _require_batched_discard()
3470 if [ $# -ne 1 ]; then
3471 echo "Usage: _require_batched_discard mnt_point" 1>&2
3475 $FSTRIM_PROG $1 > /dev/null 2>&1 || _notrun "FITRIM not supported on $1"
3480 if [ -z "$DUMPE2FS_PROG" ]; then
3481 _notrun "This test requires dumpe2fs utility."
3487 if [ ! -e /proc/self/uid_map ]; then
3488 _notrun "This test requires procfs uid_map support."
3490 if [ ! -e /proc/self/gid_map ]; then
3491 _notrun "This test requires procfs gid_map support."
3497 FSSUM_PROG=$here/src/fssum
3498 [ -x $FSSUM_PROG ] || _notrun "fssum not built"
3503 CLONER_PROG=$here/src/cloner
3504 [ -x $CLONER_PROG ] || \
3505 _notrun "cloner binary not present at $CLONER_PROG"
3508 # Normalize mount options from global $MOUNT_OPTIONS
3509 # Convert options like "-o opt1,opt2 -oopt3" to
3511 _normalize_mount_options()
3513 echo $MOUNT_OPTIONS | sed -n 's/-o\s*\(\S*\)/\1/gp'| sed 's/,/ /g'
3516 # skip test if MOUNT_OPTIONS contains the given strings
3517 # Both dax and dax=always are excluded if dax or dax=always is passed
3518 _exclude_scratch_mount_option()
3520 local mnt_opts=$(_normalize_mount_options)
3522 while [ $# -gt 0 ]; do
3524 echo "$pattern" | egrep -q "dax(=always|$)" && \
3525 pattern="dax(=always| |$)"
3526 if echo $mnt_opts | egrep -q "$pattern"; then
3527 _notrun "mount option \"$1\" not allowed in this test"
3535 _exclude_scratch_mount_option "noatime"
3538 _notrun "atime related mount options have no effect on $FSTYP"
3546 _scratch_mkfs > /dev/null 2>&1
3547 _try_scratch_mount -o relatime || \
3548 _notrun "relatime not supported by the current kernel"
3554 [ -x $here/src/nsexec ] || _notrun "src/nsexec executable not found"
3555 $here/src/nsexec -U true 2>/dev/null || _notrun "userns not supported by this kernel"
3558 _create_loop_device()
3561 dev=`losetup -f --show $file` || _fail "Cannot assign $file to a loop device"
3565 _destroy_loop_device()
3568 losetup -d $dev || _fail "Cannot destroy loop device $dev"
3571 _scale_fsstress_args()
3574 while [ $# -gt 0 ]; do
3576 -n) args="$args $1 $(($2 * $TIME_FACTOR))"; shift ;;
3577 -p) args="$args $1 $(($2 * $LOAD_FACTOR))"; shift ;;
3578 *) args="$args $1" ;;
3582 printf '%s\n' "$args"
3586 # Return the logical block size if running on a block device,
3587 # else substitute the page size.
3589 _min_dio_alignment()
3593 if [ -b "$dev" ]; then
3594 blockdev --getss $dev
3596 $here/src/feature -s
3602 echo "# $@" >> $seqres.full 2>&1
3603 "$@" >> $seqres.full 2>&1 || _fail "failed: '$@'"
3608 local target=`mktemp -p $TEST_DIR`
3609 local link=`mktemp -p $TEST_DIR -u`
3610 ln -s `basename $target` $link
3611 if [ "$?" -ne 0 ]; then
3613 _notrun "Require symlinks support"
3618 _require_hardlinks()
3620 local target=`mktemp -p $TEST_DIR`
3621 local link=`mktemp -p $TEST_DIR -u`
3623 if [ "$?" -ne 0 ]; then
3625 _notrun "No hardlink support"
3630 _require_test_fcntl_advisory_locks()
3632 [ "$FSTYP" != "cifs" ] && return 0
3633 cat /proc/mounts | grep $TEST_DEV | grep cifs | grep -q "nobrl" && return 0
3634 cat /proc/mounts | grep $TEST_DEV | grep cifs | grep -qE "nounix|forcemand" && \
3635 _notrun "Require fcntl advisory locks support"
3638 _require_test_fcntl_setlease()
3640 _require_test_program "locktest"
3641 touch $TEST_DIR/setlease_testfile
3642 $here/src/locktest -t $TEST_DIR/setlease_testfile >/dev/null 2>&1
3643 [ $? -eq 22 ] && _notrun "Require fcntl setlease support"
3646 _require_ofd_locks()
3648 # Give a test run by getlk wrlck on testfile.
3649 # If the running kernel does not support OFD locks,
3650 # EINVAL will be returned.
3651 _require_test_program "t_ofd_locks"
3652 touch $TEST_DIR/ofd_testfile
3653 $here/src/t_ofd_locks -t $TEST_DIR/ofd_testfile > /dev/null 2>&1
3654 [ $? -eq 22 ] && _notrun "Require OFD locks support"
3657 _require_test_lsattr()
3659 local testio=$(lsattr -d $TEST_DIR 2>&1)
3660 echo $testio | grep -q "Operation not supported" && \
3661 _notrun "lsattr not supported by test filesystem type: $FSTYP"
3662 echo $testio | grep -q "Inappropriate ioctl for device" && \
3663 _notrun "lsattr not supported by test filesystem type: $FSTYP"
3668 if [ -z "$1" ]; then
3669 echo "Usage: _require_chattr <attr>"
3674 touch $TEST_DIR/syscalltest
3675 chattr "+$attribute" $TEST_DIR/syscalltest > $TEST_DIR/syscalltest.out 2>&1
3677 chattr "-$attribute" $TEST_DIR/syscalltest > $TEST_DIR/syscalltest.out 2>&1
3678 if [ "$ret" -ne 0 ]; then
3679 _notrun "file system doesn't support chattr +$attribute"
3681 cat $TEST_DIR/syscalltest.out >> $seqres.full
3682 rm -f $TEST_DIR/syscalltest.out
3687 if [ -z "$1" ]; then
3688 echo "Usage: _get_total_inode <mnt>"
3692 nr_inode=`$DF_PROG -i $1 | tail -1 | awk '{print $3}'`
3698 if [ -z "$1" ]; then
3699 echo "Usage: _get_used_inode <mnt>"
3703 nr_inode=`$DF_PROG -i $1 | tail -1 | awk '{print $4}'`
3707 _get_used_inode_percent()
3709 if [ -z "$1" ]; then
3710 echo "Usage: _get_used_inode_percent <mnt>"
3714 pct_inode=`$DF_PROG -i $1 | tail -1 | awk '{ print $6 }' | \
3721 if [ -z "$1" ]; then
3722 echo "Usage: _get_free_inode <mnt>"
3726 nr_inode=`$DF_PROG -i $1 | tail -1 | awk '{print $5}'`
3730 # get the available space in bytes
3732 _get_available_space()
3734 if [ -z "$1" ]; then
3735 echo "Usage: _get_available_space <mnt>"
3739 avail_kb=`$DF_PROG $1 | tail -n1 | awk '{ print $5 }'`
3740 echo $((avail_kb * 1024))
3743 # return device size in kb
3746 grep -w `_short_dev $1` /proc/partitions | awk '{print $3}'
3749 # Make sure we actually have dmesg checking set up.
3750 _require_check_dmesg()
3752 test -w /dev/kmsg || \
3753 _notrun "Test requires writable /dev/kmsg."
3756 # Return the dmesg log since the start of this test. Caller must ensure that
3757 # /dev/kmsg was writable when the test was started so that we can find the
3758 # beginning of this test's log messages; _require_check_dmesg does this.
3759 _dmesg_since_test_start()
3761 # search the dmesg log of last run of $seqnum for possible failures
3762 # use sed \cregexpc address type, since $seqnum contains "/"
3763 dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | \
3767 # check dmesg log for a specific string, subject to the same requirements as
3768 # _dmesg_since_test_start.
3771 _dmesg_since_test_start | egrep -q "$1"
3774 # Default filter for dmesg scanning.
3775 # Ignore lockdep complaining about its own bugginess when scanning dmesg
3776 # output, because we shouldn't be failing filesystem tests on account of
3778 _check_dmesg_filter()
3780 egrep -v -e "BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low" \
3781 -e "BUG: MAX_STACK_TRACE_ENTRIES too low"
3784 # check dmesg log for WARNING/Oops/etc.
3787 if [ ! -f ${RESULT_DIR}/check_dmesg ]; then
3790 rm -f ${RESULT_DIR}/check_dmesg
3792 # default filter is a simple cat command, caller could provide a
3793 # customized filter and pass the name through the first argument, to
3794 # filter out intentional WARNINGs or Oopses
3795 local filter=${1:-_check_dmesg_filter}
3797 _dmesg_since_test_start | $filter >$seqres.dmesg
3798 egrep -q -e "kernel BUG at" \
3802 -e "possible recursive locking detected" \
3803 -e "Internal error" \
3804 -e "(INFO|ERR): suspicious RCU usage" \
3805 -e "INFO: possible circular locking dependency detected" \
3806 -e "general protection fault:" \
3807 -e "BUG .* remaining" \
3810 if [ $? -eq 0 ]; then
3811 _dump_err "_check_dmesg: something found in dmesg (see $seqres.dmesg)"
3814 if [ "$KEEP_DMESG" != "yes" ]; then
3821 # capture the kmemleak report
3824 local kern_knob="$DEBUGFS_MNT/kmemleak"
3825 local leak_file="$1"
3827 # Tell the kernel to scan for memory leaks. Apparently the write
3828 # returns before the scan is complete, so do it twice in the hopes
3829 # that twice is enough to capture all the leaks.
3830 echo "scan" > "$kern_knob"
3831 cat "$kern_knob" > /dev/null
3832 echo "scan" > "$kern_knob"
3833 cat "$kern_knob" > "$leak_file.tmp"
3834 if [ -s "$leak_file.tmp" ]; then
3835 cat > "$leak_file" << ENDL
3836 EXPERIMENTAL kmemleak reported some memory leaks! Due to the way kmemleak
3837 works, the leak might be from an earlier test, or something totally unrelated.
3839 cat "$leak_file.tmp" >> "$leak_file"
3841 rm -rf "$leak_file.tmp"
3842 echo "clear" > "$kern_knob"
3845 # Figure out if the running kernel supports kmemleak; if it does, clear out
3846 # anything that leaked before we even started testing. The leak checker only
3847 # needs to be primed like this once per ./check invocation.
3850 local kern_knob="$DEBUGFS_MNT/kmemleak"
3851 KMEMLEAK_CHECK_FILE="/tmp/check_kmemleak"
3853 # Since kernel v4.19-rc3, the kmemleak knob exists even if kmemleak is
3854 # disabled, but returns EBUSY on write. So instead of relying on
3855 # existance of writable knob file, we use a test file to indicate that
3856 # _check_kmemleak() is enabled only if we actually managed to write to
3858 rm -f "$KMEMLEAK_CHECK_FILE"
3860 if [ ! -w "$kern_knob" ]; then
3864 # Disable the automatic scan so that we can control it completely,
3865 # then dump all the leaks recorded so far.
3866 if echo "scan=off" > "$kern_knob" 2>/dev/null; then
3867 _capture_kmemleak /dev/null
3868 touch "$KMEMLEAK_CHECK_FILE"
3872 # Kick the kmemleak checker to scan for leaks. Background leak scan mode is
3873 # not enabled, so we must call the kernel to ask for a scan and deal with the
3874 # results appropriately. This we do after every test completes, whether or not
3875 # it was successful.
3878 local kern_knob="$DEBUGFS_MNT/kmemleak"
3879 local leak_file="$seqres.kmemleak"
3881 if [ ! -f "$KMEMLEAK_CHECK_FILE" ]; then
3885 # Not enabled, so discard any report of leaks found.
3886 if [ "$USE_KMEMLEAK" != "yes" ]; then
3887 _capture_kmemleak /dev/null
3891 # Capture and report any leaks
3892 _capture_kmemleak "$leak_file"
3893 if [ -s "$leak_file" ]; then
3894 _dump_err "_check_kmemleak: something found in kmemleak (see $leak_file)"
3902 # don't check dmesg log after test
3903 _disable_dmesg_check()
3905 rm -f ${RESULT_DIR}/check_dmesg
3910 # make some further configuration checks here
3911 if [ "$TEST_DEV" = "" ]
3913 echo "common/rc: Error: \$TEST_DEV is not set"
3917 # if $TEST_DEV is not mounted, mount it now as XFS
3918 if [ -z "`_fs_type $TEST_DEV`" ]
3920 # $TEST_DEV is not mounted
3923 echo "common/rc: retrying test device mount with external set"
3924 [ "$USE_EXTERNAL" != "yes" ] && export USE_EXTERNAL=yes
3927 echo "common/rc: could not mount $TEST_DEV on $TEST_DIR"
3933 # Sanity check that TEST partition is not mounted at another mount point
3934 # or as another fs type
3935 _check_mounted_on TEST_DEV $TEST_DEV TEST_DIR $TEST_DIR $FSTYP || exit 1
3936 if [ -n "$SCRATCH_DEV" ]; then
3937 # Sanity check that SCRATCH partition is not mounted at another
3938 # mount point, because it is about to be unmounted and formatted.
3939 # Another fs type for scratch is fine (bye bye old fs type).
3940 _check_mounted_on SCRATCH_DEV $SCRATCH_DEV SCRATCH_MNT $SCRATCH_MNT
3941 [ $? -le 1 ] || exit 1
3944 # Figure out if we need to add -F ("foreign", deprecated) option to xfs_io
3945 $XFS_IO_PROG -c stat $TEST_DIR 2>&1 | grep -q "is not on an XFS filesystem" && \
3946 export XFS_IO_PROG="$XFS_IO_PROG -F"
3948 # xfs_io -i option starts an idle thread for xfs_io.
3949 # With single threaded process, the file table is not shared
3950 # and file structs are not reference counted.
3951 # Spawning an idle thread can help detecting file struct
3952 # reference leaks, so we want to enable the option whenever
3954 $XFS_IO_PROG -i -c quit 2>/dev/null && \
3955 export XFS_IO_PROG="$XFS_IO_PROG -i"
3957 # xfs_copy on v5 filesystems do not require the "-d" option if xfs_db
3958 # can change the UUID on v5 filesystems
3959 if [ "$FSTYP" == "xfs" ]; then
3961 $MKFS_XFS_PROG -d file,name=/tmp/$$.img,size=512m >/dev/null 2>&1
3962 # xfs_db will return 0 even if it can't generate a new uuid, so
3963 # check the output to make sure if it can change UUID of V5 xfs
3964 $XFS_DB_PROG -x -c "uuid generate" /tmp/$$.img \
3965 | grep -q "invalid UUID\|supported on V5 fs" \
3966 && export XFS_COPY_PROG="$XFS_COPY_PROG -d"
3971 # get real device path name by following link
3975 if [ -b "$dev" ] && [ -L "$dev" ]; then
3976 dev=`readlink -f "$dev"`
3981 # basename of a device
3984 echo `basename $(_real_dev $1)`
3989 local dev=`_real_dev $1`
3990 local maj=$(stat -c%t $dev | tr [:lower:] [:upper:])
3991 local min=$(stat -c%T $dev | tr [:lower:] [:upper:])
3992 maj=$(echo "ibase=16; $maj" | bc)
3993 min=$(echo "ibase=16; $min" | bc)
3994 echo /sys/dev/block/$maj:$min
3997 # Get the minimum block size of a file. Usually this is the
3998 # minimum fs block size, but some filesystems (ocfs2) do block
3999 # mappings in larger units.
4000 _get_file_block_size()
4002 if [ -z $1 ] || [ ! -d $1 ]; then
4003 echo "Missing mount point argument for _get_file_block_size"
4006 if [ "$FSTYP" = "ocfs2" ]; then
4013 # Get the minimum block size of an fs.
4016 if [ -z $1 ] || [ ! -d $1 ]; then
4017 echo "Missing mount point argument for _get_block_size"
4025 echo $(getconf PAGE_SIZE)
4032 local args=`echo $@ | sed -e "s/ BSIZE / $bsize /g" -e "s/ PSIZE / $psize /g"`
4033 set -- $here/ltp/fsx $args $FSX_AVOID $TEST_DIR/junk
4034 echo "$@" >>$seqres.full
4035 rm -f $TEST_DIR/junk
4036 "$@" 2>&1 | tee -a $seqres.full >$tmp.fsx
4037 if [ ${PIPESTATUS[0]} -ne 0 ]; then
4045 # Test for the existence of a sysfs entry at /sys/fs/$FSTYP/DEV/$ATTR
4047 # Only one argument is needed:
4048 # - attr: path name under /sys/fs/$FSTYP/DEV
4051 # _require_fs_sysfs error/fail_at_unmount
4055 local dname=$(_short_dev $TEST_DEV)
4057 if [ -z "$attr" -o -z "$dname" ];then
4058 _fail "Usage: _require_fs_sysfs <sysfs_attr_path>"
4061 if [ ! -e /sys/fs/${FSTYP}/${dname}/${attr} ];then
4062 _notrun "This test requires /sys/fs/${FSTYP}/${dname}/${attr}"
4068 $here/src/stat_test --check-statx ||
4069 _notrun "This test requires the statx system call"
4072 # Write "content" into /sys/fs/$FSTYP/$DEV/$ATTR
4074 # All arguments are necessary, and in this order:
4075 # - dev: device name, e.g. $SCRATCH_DEV
4076 # - attr: path name under /sys/fs/$FSTYP/$dev
4077 # - content: the content of $attr
4080 # _set_fs_sysfs_attr /dev/mapper/scratch-dev error/fail_at_unmount 0
4081 _set_fs_sysfs_attr()
4089 if [ ! -b "$dev" -o -z "$attr" -o -z "$content" ];then
4090 _fail "Usage: _set_fs_sysfs_attr <mounted_device> <attr> <content>"
4093 local dname=$(_short_dev $dev)
4094 echo "$content" > /sys/fs/${FSTYP}/${dname}/${attr}
4097 # Print the content of /sys/fs/$FSTYP/$DEV/$ATTR
4099 # All arguments are necessary, and in this order:
4100 # - dev: device name, e.g. $SCRATCH_DEV
4101 # - attr: path name under /sys/fs/$FSTYP/$dev
4104 # _get_fs_sysfs_attr /dev/mapper/scratch-dev error/fail_at_unmount
4105 _get_fs_sysfs_attr()
4110 if [ ! -b "$dev" -o -z "$attr" ];then
4111 _fail "Usage: _get_fs_sysfs_attr <mounted_device> <attr>"
4114 local dname=$(_short_dev $dev)
4115 cat /sys/fs/${FSTYP}/${dname}/${attr}
4118 # Generic test for specific filesystem feature.
4119 # Currently only implemented to test overlayfs features.
4120 _require_scratch_feature()
4126 _require_scratch_overlay_features ${feature}
4129 _fail "Test for feature '${feature}' of ${FSTYP} is not implemented"
4134 # Get the maximum size of a file in $TEST_DIR (s_maxbytes). On ext4 this will
4135 # be UINT32_MAX * block_size, but other filesystems may allow up to LLONG_MAX.
4136 _get_max_file_size()
4138 local testfile=$TEST_DIR/maxfilesize.$seq
4140 local r=9223372036854775807 # LLONG_MAX
4143 while (( l < r )); do
4144 # Use _math() to avoid signed integer overflow.
4145 local m=$(_math "($l + $r + 1) / 2")
4146 if $XFS_IO_PROG -f -c "truncate $m" $testfile \
4147 |& grep -q 'File too large'
4157 # get MAX_LFS_FILESIZE
4158 _get_max_lfs_filesize()
4160 case "$(getconf LONG_BIT)" in
4162 local ulong_max=$(getconf ULONG_MAX)
4163 local page_size=$(getconf PAGE_SIZE)
4164 echo $(( ulong_max * page_size ))
4167 echo 9223372036854775807
4170 _fail "sizeof(long) == $(getconf LONG_BIT)?"
4175 # The maximum filesystem label length, /not/ including terminating NULL
4189 _notrun "$FSTYP does not define maximum label length"
4194 # Helper to check above early in a script
4195 _require_label_get_max()
4197 # Just call _label_get_max which will notrun if appropriate
4198 dummy=$(_label_get_max)
4203 $UDEV_SETTLE_PROG >/dev/null 2>&1
4204 $DMSETUP_PROG remove "$@" >>$seqres.full 2>&1
4205 $DMSETUP_PROG mknodes >/dev/null 2>&1
4210 $DMSETUP_PROG create "$@" >>$seqres.full 2>&1 || return 1
4211 $DMSETUP_PROG mknodes >/dev/null 2>&1
4212 $UDEV_SETTLE_PROG >/dev/null 2>&1
4217 # Note: filesystems are not required to report btime (creation time)
4218 # if the caller doesn't ask for it, so we define STATX_BTIME here and
4219 # pass it in to the statx command.
4220 export STATX_BTIME=0x800
4221 $XFS_IO_PROG -f $TEST_DIR/test_creation_time -c "statx -m $STATX_BTIME -v" \
4222 | grep btime >>$seqres.full 2>&1 || \
4223 _notrun "inode creation time not supported by this filesystem"
4224 rm -f $TEST_DIR/test_creation_time
4227 _require_scratch_btime()
4230 _scratch_mkfs > /dev/null 2>&1
4233 # Note: filesystems are not required to report btime (creation time)
4234 # if the caller doesn't ask for it, so we define STATX_BTIME here and
4235 # pass it in to the statx command.
4236 export STATX_BTIME=0x800
4237 $XFS_IO_PROG -f $SCRATCH_MNT/test_creation_time -c "statx -m $STATX_BTIME -v" \
4238 | grep btime >>$seqres.full 2>&1 || \
4239 _notrun "inode creation time not supported by this filesystem"
4244 _require_inode_limits()
4246 if [ $(_get_free_inode $TEST_DIR) -eq 0 ]; then
4247 _notrun "$FSTYP does not have a fixed number of inodes available"
4251 _require_filefrag_options()
4253 _require_command "$FILEFRAG_PROG" filefrag
4256 local file="$TEST_DIR/options_testfile"
4259 ${FILEFRAG_PROG} -$options $file 2>&1 | grep -q "invalid option" && \
4260 _notrun "filefrag doesn't support $options option"
4266 _require_filefrag_options "B"
4268 local file="$TEST_DIR/fibmap_testfile"
4271 ${FILEFRAG_PROG} -B $file 2>&1 | grep -q "FIBMAP[[:space:]]*unsupported"
4272 if [ $? -eq 0 ]; then
4273 _notrun "FIBMAP not supported by this filesystem"
4278 _try_wipe_scratch_devs()
4280 test -x "$WIPEFS_PROG" || return 0
4282 # Do specified filesystem wipe at first
4285 _try_wipe_scratch_xfs
4289 # Then do wipefs on all scratch devices
4290 for dev in $SCRATCH_DEV_POOL $SCRATCH_DEV $SCRATCH_LOGDEV $SCRATCH_RTDEV; do
4291 test -b $dev && $WIPEFS_PROG -a $dev
4295 # Only run this on xfs if xfs_scrub is available and has the unicode checker
4296 _check_xfs_scrub_does_unicode() {
4297 [ "${FSTYP}" == "xfs" ] || return 1
4302 _supports_xfs_scrub "${mount}" "${dev}" || return 1
4304 # We only care if xfs_scrub has unicode string support...
4305 if ! type ldd > /dev/null 2>&1 || \
4306 ! ldd "${XFS_SCRUB_PROG}" | grep -q libicui18n; then
4313 # exfat timestamps start at 1980 and cannot be prior to epoch
4314 _require_negative_timestamps() {
4317 _notrun "$FSTYP does not support negative timestamps"
4322 # Require the 'accton' userspace tool and CONFIG_BSD_PROCESS_ACCT=y.
4323 _require_bsd_process_accounting()
4325 _require_command "$ACCTON_PROG" accton
4326 $ACCTON_PROG on &> $tmp.test_accton
4327 cat $tmp.test_accton >> $seqres.full
4328 if grep 'Function not implemented' $tmp.test_accton; then
4329 _notrun "BSD process accounting support unavailable"
4331 $ACCTON_PROG off >> $seqres.full
4334 _require_sysctl_variable()
4337 sysctl $name &>/dev/null || _notrun "$name sysctl unavailable"
4342 mknod $TEST_DIR/$seq.null c 1 3 \
4343 || _notrun "$FSTYP does not support mknod/mkfifo"
4344 rm -f $TEST_DIR/$seq.null
4349 ################################################################################
4350 # make sure this script returns success