2 #-----------------------------------------------------------------------
3 # Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved.
4 # This program is free software; you can redistribute it and/or modify
5 # it under the terms of the GNU General Public License as published by
6 # the Free Software Foundation; either version 2 of the License, or
7 # (at your option) any later version.
9 # This program is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 # GNU General Public License for more details.
14 # You should have received a copy of the GNU General Public License
15 # along with this program; if not, write to the Free Software
16 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
19 # Contact information: Silicon Graphics, Inc., 1500 Crittenden Lane,
20 # Mountain View, CA 94043, USA, or: http://www.sgi.com
21 #-----------------------------------------------------------------------
23 BC=$(which bc 2> /dev/null) || BC=
25 # Valid test names start with 3 digits "NNN":
27 # followed by an optional "-":
29 # followed by an optional combination of alphanumeric and "-" chars:
31 # e.g. 999-the-mark-of-fstests
33 VALID_TEST_ID="[0-9]\{3\}"
34 VALID_TEST_NAME="$VALID_TEST_ID-\?[[:alnum:]-]*"
39 _notrun "this test requires 'bc' tool for doing math operations"
45 [ $# -le 0 ] && return
47 result=$(LANG=C echo "scale=0; $@" | "$BC" -q 2> /dev/null)
49 _notrun "this test requires 'bc' tool for doing math operations"
56 if [ "$HOSTOS" == "Linux" ]
58 command dd --help 2>&1 | grep noxfer >/dev/null
62 command dd status=noxfer $@
76 $BTRFS_UTIL_PROG sub list $mnt | grep $name | awk '{ print $2 }'
79 # Prints the md5 checksum of a given file
82 md5sum $1 | cut -d ' ' -f1
85 # Write a byte into a range of a file
93 "$XFS_IO_PROG" $xfs_io_args -f -c "pwrite -S $pattern $offset $len" "$file"
96 # mmap-write a byte into a range of a file
104 "$XFS_IO_PROG" -f -c "mmap -rw 0 $mmap_len" -c "mwrite -S $pattern $offset $len" "$file"
107 # ls -l w/ selinux sometimes puts a dot at the end:
108 # -rwxrw-r--. id1 id2 file1
109 # Also filter out lost+found directory on extN file system if present
113 ls -l $* | sed "s/\(^[-rwxdlbcpsStT]*\)\. /\1 /" | grep -v 'lost+found'
116 # we need common/config
117 if [ "$iam" != "check" ]
119 if ! . ./common/config
121 echo "$iam: failed to source common/config"
126 # check for correct setup
129 [ "$XFS_LOGPRINT_PROG" = "" ] && _fatal "xfs_logprint not found"
130 [ "$XFS_REPAIR_PROG" = "" ] && _fatal "xfs_repair not found"
131 [ "$XFS_DB_PROG" = "" ] && _fatal "xfs_db not found"
132 [ "$MKFS_XFS_PROG" = "" ] && _fatal "mkfs_xfs not found"
135 [ "$MKFS_UDF_PROG" = "" ] && _fatal "mkfs_udf/mkudffs not found"
138 [ "$MKFS_BTRFS_PROG" = "" ] && _fatal "mkfs.btrfs not found"
141 [ "$MKFS_EXT4_PROG" = "" ] && _fatal "mkfs.ext4 not found"
144 [ "$MKFS_F2FS_PROG" = "" ] && _fatal "mkfs.f2fs not found"
153 [ "$MKFS_REISER4_PROG" = "" ] && _fatal "mkfs.reiser4 not found"
157 # make sure we have a standard umask
162 $MOUNT_PROG `_mount_ops_filter $*`
170 if [ "$FSTYP" != "xfs" ]; then
176 [ "$HOSTOS" != "IRIX" ] && SCRATCH_OPTIONS="$SCRATCH_OPTIONS -f"
185 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_RTDEV" ] && \
186 SCRATCH_OPTIONS="$SCRATCH_OPTIONS ${rt_opt}rtdev=$SCRATCH_RTDEV"
187 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
188 SCRATCH_OPTIONS="$SCRATCH_OPTIONS ${log_opt}logdev=$SCRATCH_LOGDEV"
196 if [ "$FSTYP" != "xfs" ]; then
210 [ "$USE_EXTERNAL" = yes -a ! -z "$TEST_RTDEV" ] && \
211 TEST_OPTIONS="$TEST_OPTIONS ${rt_opt}rtdev=$TEST_RTDEV"
212 [ "$USE_EXTERNAL" = yes -a ! -z "$TEST_LOGDEV" ] && \
213 TEST_OPTIONS="$TEST_OPTIONS ${log_opt}logdev=$TEST_LOGDEV"
220 #get mount point to handle dmapi mtpt option correctly
222 [ $last_index -gt 0 ] && shift $last_index
225 # irix is fussy about how it is fed its mount options
226 # - multiple -o's are not allowed
227 # - no spaces between comma delimitered options
228 # the sed script replaces all -o's (except the first) with a comma
229 # not required for linux, but won't hurt
231 echo $params | sed -e 's/[[:space:]]\+-o[[:space:]]*/UnIqUe/1; s/[[:space:]]\+-o[[:space:]]*/,/g; s/UnIqUe/ -o /1' \
232 | sed -e 's/dmapi/dmi/' \
233 | $PERL_PROG -ne "s#mtpt=[^,|^\n|^\s]*#mtpt=$FS_ESCAPED\1\2#; print;"
237 # Used for mounting non-scratch devices (e.g. loop, dm constructs)
238 # with the safe set of scratch mount options (e.g. loop image may be
239 # hosted on $SCRATCH_DEV, so can't use external scratch devices).
240 _common_dev_mount_options()
242 echo $MOUNT_OPTIONS $SELINUX_MOUNT_OPTIONS $*
245 _overlay_basic_mount_options()
247 echo "-o lowerdir=$1/$OVERLAY_LOWER_DIR,upperdir=$1/$OVERLAY_UPPER_DIR,workdir=$1/$OVERLAY_WORK_DIR"
250 _overlay_mount_options()
252 echo `_common_dev_mount_options` \
253 `_overlay_basic_mount_options $1` \
254 $OVERLAY_MOUNT_OPTIONS
257 _scratch_mount_options()
259 _scratch_options mount
261 if [ "$FSTYP" == "overlay" ]; then
262 echo `_overlay_mount_options $SCRATCH_DEV`
265 echo `_common_dev_mount_options $*` $SCRATCH_OPTIONS \
266 $SCRATCH_DEV $SCRATCH_MNT
269 # helper function to do the actual overlayfs mount operation
270 _overlay_mount_dirs()
277 $MOUNT_PROG -t overlay -o lowerdir=$lowerdir -o upperdir=$upperdir \
278 -o workdir=$workdir $*
281 # Given a dir, set up 3 subdirectories and mount on the given mnt.
282 # The dir is used as the mount device so it can be seen from df or mount
289 local upper_fst=$(df --output=fstype $dir | tail -1)
292 if ! xfs_info $dir | grep -q "ftype=1" ; then
293 _notrun "upper fs needs to support d_type"
297 if ! tune2fs -l $(df --output=source $dir | tail -1) | \
298 grep -q filetype ; then
299 _notrun "upper fs needs to support d_type"
304 mkdir -p $dir/$OVERLAY_UPPER_DIR
305 mkdir -p $dir/$OVERLAY_LOWER_DIR
306 mkdir -p $dir/$OVERLAY_WORK_DIR
308 _overlay_mount_dirs $dir/$OVERLAY_LOWER_DIR $dir/$OVERLAY_UPPER_DIR \
309 $dir/$OVERLAY_WORK_DIR $OVERLAY_MOUNT_OPTIONS \
310 $SELINUX_MOUNT_OPTIONS $* $dir $mnt
313 _overlay_test_mount()
315 _overlay_mount $TEST_DEV $TEST_DIR $*
318 _overlay_scratch_mount()
320 _overlay_mount $SCRATCH_DEV $SCRATCH_MNT $*
323 _overlay_test_unmount()
325 $UMOUNT_PROG $TEST_DIR
328 _overlay_scratch_unmount()
330 $UMOUNT_PROG $SCRATCH_MNT
335 if [ "$FSTYP" == "overlay" ]; then
336 _overlay_scratch_mount $*
339 _mount -t $FSTYP `_scratch_mount_options $*`
346 _overlay_scratch_unmount
349 $UMOUNT_PROG $SCRATCH_MNT
352 $UMOUNT_PROG $SCRATCH_DEV
361 if test -n "$opts"; then
362 mount -o "remount,$opts" $SCRATCH_MNT
366 _scratch_cycle_mount()
370 if [ "$FSTYP" = tmpfs ]; then
371 _scratch_remount "$opts"
374 if test -n "$opts"; then
378 _scratch_mount "$opts"
383 if [ "$FSTYP" == "overlay" ]; then
384 _overlay_test_mount $*
388 _mount -t $FSTYP $TEST_OPTIONS $TEST_FS_MOUNT_OPTS $SELINUX_MOUNT_OPTIONS $* $TEST_DEV $TEST_DIR
393 if [ "$FSTYP" == "overlay" ]; then
394 _overlay_test_unmount
396 $UMOUNT_PROG $TEST_DEV
402 if [ "$FSTYP" = tmpfs ]; then
409 _scratch_mkfs_options()
411 _scratch_options mkfs
412 echo $SCRATCH_OPTIONS $MKFS_OPTIONS $* $SCRATCH_DEV
420 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
421 options="-l $SCRATCH_LOGDEV"
423 xfs_metadump $options $SCRATCH_DEV $dumpfile
426 _setup_large_xfs_fs()
431 [ "$LARGE_SCRATCH_DEV" != yes ] && return 0
432 [ -z "$SCRATCH_DEV_EMPTY_SPACE" ] && SCRATCH_DEV_EMPTY_SPACE=0
433 [ $SCRATCH_DEV_EMPTY_SPACE -ge $fs_size ] && return 0
435 # calculate the size of the file we need to allocate.
436 # Default free space in the FS is 50GB, but you can specify more via
437 # SCRATCH_DEV_EMPTY_SPACE
438 file_size=$(($fs_size - 50*1024*1024*1024))
439 file_size=$(($file_size - $SCRATCH_DEV_EMPTY_SPACE))
441 # mount the filesystem, create the file, unmount it
442 _scratch_mount 2>&1 >$tmp_dir/mnt.err
444 if [ $status -ne 0 ]; then
446 cat $tmp_dir/mnt.err >&2
447 rm -f $tmp_dir/mnt.err
450 rm -f $tmp_dir/mnt.err
453 -c "truncate $file_size" \
454 -c "falloc -k 0 $file_size" \
456 $SCRATCH_MNT/.use_space 2>&1 > /dev/null
457 export NUM_SPACE_FILES=1
460 if [ $status -ne 0 ]; then
461 echo "large file prealloc failed"
462 cat $tmp_dir/mnt.err >&2
468 _scratch_mkfs_xfs_opts()
472 # remove metadata related mkfs options if mkfs.xfs doesn't them
473 if [ -n "$XFS_MKFS_HAS_NO_META_SUPPORT" ]; then
474 mkfs_opts=`echo $mkfs_opts | sed "s/-m\s\+\S\+//g"`
477 _scratch_options mkfs
479 $MKFS_XFS_PROG $SCRATCH_OPTIONS $mkfs_opts $SCRATCH_DEV
483 _scratch_mkfs_xfs_supported()
487 _scratch_options mkfs
489 $MKFS_XFS_PROG -N $MKFS_OPTIONS $SCRATCH_OPTIONS $mkfs_opts $SCRATCH_DEV
492 # a mkfs failure may be caused by conflicts between $MKFS_OPTIONS and
493 # $mkfs_opts, try again without $MKFS_OPTIONS
494 if [ $mkfs_status -ne 0 -a -n "$mkfs_opts" ]; then
495 $MKFS_XFS_PROG -N $SCRATCH_OPTIONS $mkfs_opts $SCRATCH_DEV
503 # extra mkfs options can be added by tests
504 local extra_mkfs_options=$*
508 # save mkfs output in case conflict means we need to run again.
509 # only the output for the mkfs that applies should be shown
510 _scratch_mkfs_xfs_opts $MKFS_OPTIONS $extra_mkfs_options \
511 2>$tmp_dir.mkfserr 1>$tmp_dir.mkfsstd
515 # a mkfs failure may be caused by conflicts between
516 # $MKFS_OPTIONS and $extra_mkfs_options
517 if [ $mkfs_status -ne 0 -a ! -z "$extra_mkfs_options" ]; then
519 echo -n "** mkfs failed with extra mkfs options "
520 echo "added to \"$MKFS_OPTIONS\" by test $seq **"
521 echo -n "** attempting to mkfs using only test $seq "
522 echo "options: $extra_mkfs_options **"
525 # running mkfs again. overwrite previous mkfs output files
526 _scratch_mkfs_xfs_opts $extra_mkfs_options \
527 2>$tmp_dir.mkfserr 1>$tmp_dir.mkfsstd
531 if [ $mkfs_status -eq 0 -a "$LARGE_SCRATCH_DEV" = yes ]; then
532 # manually parse the mkfs output to get the fs size in bytes
534 fs_size=`cat $tmp_dir.mkfsstd | perl -ne '
535 if (/^data\s+=\s+bsize=(\d+)\s+blocks=(\d+)/) {
537 print STDOUT "$size\n";
539 _setup_large_xfs_fs $fs_size
543 # output stored mkfs output, filtering unnecessary warnings from stderr
545 cat $tmp_dir.mkfserr | sed \
546 -e '/less than device physical sector/d' \
547 -e '/switching to logical sector/d' \
549 rm -f $tmp_dir.mkfserr $tmp_dir.mkfsstd
554 # xfs_check script is planned to be deprecated. But, we want to
555 # be able to invoke "xfs_check" behavior in xfstests in order to
556 # maintain the current verification levels.
561 USAGE="Usage: xfs_check [-fsvV] [-l logdev] [-i ino]... [-b bno]... special"
563 while getopts "b:fi:l:stvV" c
569 i) OPTS=$OPTS"-i "$OPTARG" ";;
570 b) OPTS=$OPTS"-b "$OPTARG" ";;
571 f) DBOPTS=$DBOPTS" -f";;
572 l) DBOPTS=$DBOPTS" -l "$OPTARG" ";;
573 V) $XFS_DB_PROG -p xfs_check -V
581 1) ${XFS_DB_PROG}${DBOPTS} -F -i -p xfs_check -c "check$OPTS" $1
591 _setup_large_ext4_fs()
596 [ "$LARGE_SCRATCH_DEV" != yes ] && return 0
597 [ -z "$SCRATCH_DEV_EMPTY_SPACE" ] && SCRATCH_DEV_EMPTY_SPACE=0
598 [ $SCRATCH_DEV_EMPTY_SPACE -ge $fs_size ] && return 0
600 # Default free space in the FS is 50GB, but you can specify more via
601 # SCRATCH_DEV_EMPTY_SPACE
602 space_to_consume=$(($fs_size - 50*1024*1024*1024 - $SCRATCH_DEV_EMPTY_SPACE))
604 # mount the filesystem and create 16TB - 4KB files until we consume
605 # all the necessary space.
606 _scratch_mount 2>&1 >$tmp_dir/mnt.err
608 if [ $status -ne 0 ]; then
610 cat $tmp_dir/mnt.err >&2
611 rm -f $tmp_dir/mnt.err
614 rm -f $tmp_dir/mnt.err
616 file_size=$((16*1024*1024*1024*1024 - 4096))
618 while [ $space_to_consume -gt $file_size ]; do
621 -c "truncate $file_size" \
622 -c "falloc -k 0 $file_size" \
623 $SCRATCH_MNT/.use_space.$nfiles 2>&1
625 if [ $status -ne 0 ]; then
629 space_to_consume=$(( $space_to_consume - $file_size ))
630 nfiles=$(($nfiles + 1))
633 # consume the remaining space.
634 if [ $space_to_consume -gt 0 ]; then
636 -c "truncate $space_to_consume" \
637 -c "falloc -k 0 $space_to_consume" \
638 $SCRATCH_MNT/.use_space.$nfiles 2>&1
641 export NUM_SPACE_FILES=$nfiles
644 if [ $status -ne 0 ]; then
645 echo "large file prealloc failed"
646 cat $tmp_dir/mnt.err >&2
654 # extra mkfs options can be added by tests
655 local extra_mkfs_options=$*
659 $MKFS_EXT4_PROG -F $MKFS_OPTIONS $extra_mkfs_options $SCRATCH_DEV \
660 2>$tmp_dir.mkfserr 1>$tmp_dir.mkfsstd
663 # a mkfs failure may be caused by conflicts between
664 # $MKFS_OPTIONS and $extra_mkfs_options
665 if [ $mkfs_status -ne 0 -a ! -z "$extra_mkfs_options" ]; then
667 echo -n "** mkfs failed with extra mkfs options "
668 echo "added to \"$MKFS_OPTIONS\" by test $seq **"
669 echo -n "** attempting to mkfs using only test $seq "
670 echo "options: $extra_mkfs_options **"
673 # running mkfs again. overwrite previous mkfs output files
674 $MKFS_EXT4_PROG -F $extra_mkfs_options $SCRATCH_DEV \
675 2>$tmp_dir.mkfserr 1>$tmp_dir.mkfsstd
679 if [ $mkfs_status -eq 0 -a "$LARGE_SCRATCH_DEV" = yes ]; then
680 # manually parse the mkfs output to get the fs size in bytes
681 fs_size=`cat $tmp_dir.mkfsstd | awk ' \
682 /^Block size/ { split($2, a, "="); bs = a[2] ; } \
683 / inodes, / { blks = $3 } \
684 /reserved for the super user/ { resv = $1 } \
685 END { fssize = bs * blks - resv; print fssize }'`
687 _setup_large_ext4_fs $fs_size
691 # output stored mkfs output
692 grep -v -e ^Warning: -e "^mke2fs " $tmp_dir.mkfserr >&2
694 rm -f $tmp_dir.mkfserr $tmp_dir.mkfsstd
706 # do nothing for cifs
709 # do nothing for overlay
712 $MKFS_UDF_PROG $MKFS_OPTIONS $* $TEST_DEV > /dev/null
715 $MKFS_BTRFS_PROG $MKFS_OPTIONS $* $TEST_DEV > /dev/null
718 $MKFS_PROG -t $FSTYP -- -F $MKFS_OPTIONS $* $TEST_DEV
721 yes | $MKFS_PROG -t $FSTYP -- $MKFS_OPTIONS $* $TEST_DEV
733 # do nothing for overlay
736 $MKFS_UDF_PROG $MKFS_OPTIONS $* 2>$tmp_dir.mkfserr 1>$tmp_dir.mkfsstd
739 $MKFS_BTRFS_PROG $MKFS_OPTIONS $* 2>$tmp_dir.mkfserr 1>$tmp_dir.mkfsstd
742 $MKFS_PROG -t $FSTYP -- -F $MKFS_OPTIONS $* \
743 2>$tmp_dir.mkfserr 1>$tmp_dir.mkfsstd
747 yes | $MKFS_PROG -t $FSTYP -- $MKFS_OPTIONS $* \
748 2>$tmp_dir.mkfserr 1>$tmp_dir.mkfsstd
752 if [ $? -ne 0 ]; then
753 # output stored mkfs output
754 cat $tmp_dir.mkfserr >&2
759 rm -f $tmp_dir.mkfserr $tmp_dir.mkfsstd
762 # remove all files in $SCRATCH_MNT, useful when testing on NFS/CIFS
763 _scratch_cleanup_files()
767 # $SCRATCH_DEV is a valid directory in overlay case
768 rm -rf $SCRATCH_DEV/*
772 rm -rf $SCRATCH_MNT/*
785 # unable to re-create NFS, just remove all files in $SCRATCH_MNT to
786 # avoid EEXIST caused by the leftover files created in previous runs
787 _scratch_cleanup_files
790 # unable to re-create CIFS, just remove all files in $SCRATCH_MNT to
791 # avoid EEXIST caused by the leftover files created in previous runs
792 _scratch_cleanup_files
795 # unable to re-create overlay, remove all files in $SCRATCH_MNT to
796 # avoid EEXIST caused by the leftover files created in previous runs
797 _scratch_cleanup_files
800 $MKFS_UDF_PROG $MKFS_OPTIONS $* $SCRATCH_DEV > /dev/null
803 $MKFS_BTRFS_PROG $MKFS_OPTIONS $* $SCRATCH_DEV > /dev/null
806 $MKFS_PROG -t $FSTYP -- -F $MKFS_OPTIONS $* $SCRATCH_DEV
809 _scratch_mkfs_ext4 $*
812 # do nothing for tmpfs
815 $MKFS_F2FS_PROG $MKFS_OPTIONS $* $SCRATCH_DEV > /dev/null
818 yes | $MKFS_PROG -t $FSTYP -- $MKFS_OPTIONS $* $SCRATCH_DEV
823 # Helper function to get a spare or replace-target device from
824 # configured SCRATCH_DEV_POLL, must call _scratch_dev_pool_get()
825 # before _spare_dev_get(). Replace-target-device/Spare-device will
826 # be assigned to SPARE_DEV.
827 # As of now only one replace-target-device/spare-device can be
831 # _scratch_dev_pool_get() <ndevs>
835 # _scratch_dev_pool_put()
839 typeset -p SCRATCH_DEV_POOL_SAVED >/dev/null 2>&1
840 if [ $? -ne 0 ]; then
841 _fail "Bug: unset val, must call _scratch_dev_pool_get before _spare_dev_get"
844 if [ -z "$SCRATCH_DEV_POOL_SAVED" ]; then
845 _fail "Bug: str empty, must call _scratch_dev_pool_get before _spare_dev_get"
848 # Check if the spare is already assigned
849 typeset -p SPARE_DEV >/dev/null 2>&1
850 if [ $? -eq 0 ]; then
851 if [ ! -z "$SPARE_DEV" ]; then
852 _fail "Bug: SPARE_DEV = $SPARE_DEV already assigned"
856 local ndevs=`echo $SCRATCH_DEV_POOL| wc -w`
857 local config_ndevs=`echo $SCRATCH_DEV_POOL_SAVED| wc -w`
859 if [ $ndevs -eq $config_ndevs ]; then
860 _notrun "All devs used no spare"
862 # Get a dev that is not used
863 local devs[]="( $SCRATCH_DEV_POOL_SAVED )"
864 SPARE_DEV=${devs[@]:$ndevs:1}
870 typeset -p SPARE_DEV >/dev/null 2>&1
871 if [ $? -ne 0 ]; then
872 _fail "Bug: unset val, must call _spare_dev_get before its put"
875 if [ -z "$SPARE_DEV" ]; then
876 _fail "Bug: str empty, must call _spare_dev_get before its put"
883 # Generally test cases will have..
884 # _require_scratch_dev_pool X
885 # to make sure it has the enough scratch devices including
886 # replace-target and spare device. Now arg1 here is the
887 # required number of scratch devices by a-test-case excluding
888 # the replace-target and spare device. So this function will
889 # set SCRATCH_DEV_POOL to the specified number of devices.
892 # _scratch_dev_pool_get() <ndevs>
895 # _scratch_dev_pool_put()
897 _scratch_dev_pool_get()
899 if [ $# -ne 1 ]; then
900 _fail "Usage: _scratch_dev_pool_get ndevs"
904 local config_ndevs=`echo $SCRATCH_DEV_POOL| wc -w`
905 local devs[]="( $SCRATCH_DEV_POOL )"
907 typeset -p config_ndevs >/dev/null 2>&1
908 if [ $? -ne 0 ]; then
909 _fail "Bug: cant find SCRATCH_DEV_POOL ndevs"
912 if [ $config_ndevs -lt $test_ndevs ]; then
913 _notrun "Need at least test requested number of ndevs $test_ndevs"
916 SCRATCH_DEV_POOL_SAVED=${SCRATCH_DEV_POOL}
917 export SCRATCH_DEV_POOL_SAVED
918 SCRATCH_DEV_POOL=${devs[@]:0:$test_ndevs}
919 export SCRATCH_DEV_POOL
922 _scratch_dev_pool_put()
924 typeset -p SCRATCH_DEV_POOL_SAVED >/dev/null 2>&1
925 if [ $? -ne 0 ]; then
926 _fail "Bug: unset val, must call _scratch_dev_pool_get before _scratch_dev_pool_put"
929 if [ -z "$SCRATCH_DEV_POOL_SAVED" ]; then
930 _fail "Bug: str empty, must call _scratch_dev_pool_get before _scratch_dev_pool_put"
933 export SCRATCH_DEV_POOL=$SCRATCH_DEV_POOL_SAVED
934 export SCRATCH_DEV_POOL_SAVED=""
941 # if dup profile is in mkfs options call _scratch_mkfs instead
942 # because dup profile only works with single device
943 if [[ "$*" =~ dup ]]; then
946 $MKFS_BTRFS_PROG $MKFS_OPTIONS $* $SCRATCH_DEV_POOL > /dev/null
950 echo "_scratch_pool_mkfs is not implemented for $FSTYP" 1>&2
955 # Return the amount of free memory available on the system
958 free -b | grep ^Mem | awk '{print $4}'
961 # Create fs of certain size on scratch device
962 # _scratch_mkfs_sized <size in bytes> [optional blocksize]
963 _scratch_mkfs_sized()
970 def_blksz=`echo $MKFS_OPTIONS|sed -rn 's/.*-b ?size= ?+([0-9]+).*/\1/p'`
972 ext2|ext3|ext4|ext4dev|udf|btrfs|reiser4)
973 def_blksz=`echo $MKFS_OPTIONS| sed -rn 's/.*-b ?+([0-9]+).*/\1/p'`
977 [ -n "$def_blksz" ] && blocksize=$def_blksz
978 [ -z "$blocksize" ] && blocksize=4096
982 if ! [[ $fssize =~ $re ]] ; then
983 _notrun "error: _scratch_mkfs_sized: fs size \"$fssize\" not an integer."
985 if ! [[ $blocksize =~ $re ]] ; then
986 _notrun "error: _scratch_mkfs_sized: block size \"$blocksize\" not an integer."
989 blocks=`expr $fssize / $blocksize`
991 if [ "$HOSTOS" == "Linux" -a -b "$SCRATCH_DEV" ]; then
992 devsize=`blockdev --getsize64 $SCRATCH_DEV`
993 [ "$fssize" -gt "$devsize" ] && _notrun "Scratch device too small"
998 # don't override MKFS_OPTIONS that set a block size.
999 echo $MKFS_OPTIONS |egrep -q "b?size="
1000 if [ $? -eq 0 ]; then
1001 _scratch_mkfs_xfs -d size=$fssize
1003 _scratch_mkfs_xfs -d size=$fssize -b size=$blocksize
1006 ext2|ext3|ext4|ext4dev)
1007 ${MKFS_PROG}.$FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
1010 $MKFS_UDF_PROG $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
1014 (( fssize <= 100 * 1024 * 1024 )) && mixed_opt='--mixed'
1015 $MKFS_BTRFS_PROG $MKFS_OPTIONS $mixed_opt -b $fssize $SCRATCH_DEV
1018 # mkfs.resier4 requires size in KB as input for creating filesystem
1019 $MKFS_REISER4_PROG $MKFS_OPTIONS -y -b $blocksize $SCRATCH_DEV \
1020 `expr $fssize / 1024`
1023 # mkfs.f2fs requires # of sectors as an input for the size
1024 sector_size=`blockdev --getss $SCRATCH_DEV`
1025 $MKFS_F2FS_PROG $MKFS_OPTIONS $SCRATCH_DEV `expr $fssize / $sector_size`
1028 free_mem=`_free_memory_bytes`
1029 if [ "$free_mem" -lt "$fssize" ] ; then
1030 _notrun "Not enough memory ($free_mem) for tmpfs with $fssize bytes"
1032 export MOUNT_OPTIONS="-o size=$fssize $TMPFS_MOUNT_OPTIONS"
1035 _notrun "Filesystem $FSTYP not supported in _scratch_mkfs_sized"
1040 # Emulate an N-data-disk stripe w/ various stripe units
1041 # _scratch_mkfs_geom <sunit bytes> <swidth multiplier> [optional blocksize]
1042 _scratch_mkfs_geom()
1047 [ -z "$blocksize" ] && blocksize=4096
1049 let sunit_blocks=$sunit_bytes/$blocksize
1050 let swidth_blocks=$sunit_blocks*$swidth_mult
1054 MKFS_OPTIONS+=" -b size=$blocksize, -d su=$sunit_bytes,sw=$swidth_mult"
1057 MKFS_OPTIONS+=" -b $blocksize -E stride=$sunit_blocks,stripe_width=$swidth_blocks"
1060 _notrun "can't mkfs $FSTYP with geometry"
1066 # Create fs of certain blocksize on scratch device
1067 # _scratch_mkfs_blocksized blocksize
1068 _scratch_mkfs_blocksized()
1073 if ! [[ $blocksize =~ $re ]] ; then
1074 _notrun "error: _scratch_mkfs_sized: block size \"$blocksize\" not an integer."
1079 _scratch_mkfs_xfs $MKFS_OPTIONS -b size=$blocksize
1081 ext2|ext3|ext4|ocfs2)
1082 ${MKFS_PROG}.$FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV
1085 _notrun "Filesystem $FSTYP not supported in _scratch_mkfs_blocksized"
1094 xfs_io -x -c "resblks $1" $SCRATCH_MNT
1101 _scratch_xfs_db_options()
1104 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
1105 SCRATCH_OPTIONS="-l$SCRATCH_LOGDEV"
1106 echo $SCRATCH_OPTIONS $* $SCRATCH_DEV
1111 $XFS_DB_PROG "$@" $(_scratch_xfs_db_options)
1114 _scratch_xfs_logprint()
1117 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
1118 SCRATCH_OPTIONS="-l$SCRATCH_LOGDEV"
1119 $XFS_LOGPRINT_PROG $SCRATCH_OPTIONS $* $SCRATCH_DEV
1122 _test_xfs_logprint()
1125 [ "$USE_EXTERNAL" = yes -a ! -z "$TEST_LOGDEV" ] && \
1126 TEST_OPTIONS="-l$TEST_LOGDEV"
1127 $XFS_LOGPRINT_PROG $TEST_OPTIONS $* $TEST_DEV
1130 _scratch_xfs_check()
1133 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
1134 SCRATCH_OPTIONS="-l $SCRATCH_LOGDEV"
1135 [ "$LARGE_SCRATCH_DEV" = yes ] && \
1136 SCRATCH_OPTIONS=$SCRATCH_OPTIONS" -t"
1137 _xfs_check $SCRATCH_OPTIONS $* $SCRATCH_DEV
1140 _scratch_xfs_repair()
1143 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
1144 SCRATCH_OPTIONS="-l$SCRATCH_LOGDEV"
1145 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_RTDEV" ] && \
1146 SCRATCH_OPTIONS=$SCRATCH_OPTIONS" -r$SCRATCH_RTDEV"
1147 [ "$LARGE_SCRATCH_DEV" = yes ] && SCRATCH_OPTIONS=$SCRATCH_OPTIONS" -t"
1148 $XFS_REPAIR_PROG $SCRATCH_OPTIONS $* $SCRATCH_DEV
1151 # Repair scratch filesystem. Returns 0 if the FS is good to go (either no
1152 # errors found or errors were fixed) and nonzero otherwise; also spits out
1153 # a complaint on stderr if fsck didn't tell us that the FS is good to go.
1154 _repair_scratch_fs()
1158 _scratch_xfs_repair "$@" 2>&1
1160 if [ "$res" -ne 0 ]; then
1161 echo "xfs_repair returns $res; replay log?"
1164 if [ "$res" -gt 0 ]; then
1165 echo "mount returns $res; zap log?"
1166 _scratch_xfs_repair -L 2>&1
1167 echo "log zap returns $?"
1169 umount "$SCRATCH_MNT"
1171 _scratch_xfs_repair "$@" 2>&1
1174 test $res -ne 0 && >&2 echo "xfs_repair failed, err=$res"
1178 # Let's hope fsck -y suffices...
1179 fsck -t $FSTYP -y $SCRATCH_DEV 2>&1
1186 >&2 echo "fsck.$FSTYP failed, err=$res"
1198 echo "Usage: _get_pids_by_name process-name" 1>&2
1202 # Algorithm ... all ps(1) variants have a time of the form MM:SS or
1203 # HH:MM:SS before the psargs field, use this as the search anchor.
1205 # Matches with $1 (process-name) occur if the first psarg is $1
1206 # or ends in /$1 ... the matching uses sed's regular expressions,
1207 # so passing a regex into $1 will work.
1212 -e 's/[ ][ ]*/ /g' \
1215 -e "/[0-9]:[0-9][0-9] *[^ ]*\/$1 /s/ .*//p" \
1216 -e "/[0-9]:[0-9][0-9] *$1 /s/ .*//p"
1219 # fix malloc libs output
1223 # filter out the Electric Fence notice
1226 if (defined $o && /^\s+Electric Fence/) {
1232 print $o if (defined $o);
1236 print $o if (defined $o);
1241 # _df_device : get an IRIX style df line for a given device
1243 # - returns "" if not mounted
1244 # - returns fs type in field two (ala IRIX)
1245 # - joins line together if split by fancy df formatting
1246 # - strips header etc
1253 echo "Usage: _df_device device" 1>&2
1257 # Note that we use "==" here so awk doesn't try to interpret an NFS over
1258 # IPv6 server as a regular expression.
1259 $DF_PROG 2>/dev/null | $AWK_PROG -v what=$1 '
1260 ($1==what) && (NF==1) {
1274 # _df_dir : get an IRIX style df line for device where a directory resides
1276 # - returns fs type in field two (ala IRIX)
1277 # - joins line together if split by fancy df formatting
1278 # - strips header etc
1285 echo "Usage: _df_dir device" 1>&2
1289 $DF_PROG $1 2>/dev/null | $AWK_PROG -v what=$1 '
1305 # return percentage used disk space for mounted device
1311 echo "Usage: _used device" 1>&2
1315 _df_device $1 | $AWK_PROG '{ sub("%", "") ; print $6 }'
1318 # return the FS type of a mounted device
1324 echo "Usage: _fs_type device" 1>&2
1329 # The Linux kernel shows NFSv4 filesystems in df output as
1330 # filesystem type nfs4, although we mounted it as nfs earlier.
1331 # Fix the filesystem type up here so that the callers don't
1332 # have to bother with this quirk.
1334 _df_device $1 | $AWK_PROG '{ print $2 }' | sed -e 's/nfs4/nfs/'
1337 # return the FS mount options of a mounted device
1339 # should write a version which just parses the output of mount for IRIX
1340 # compatibility, but since this isn't used at all, at the moment I'll leave
1347 echo "Usage: _fs_options device" 1>&2
1351 $AWK_PROG -v dev=$1 '
1352 match($1,dev) { print $4 }
1356 # returns device number if a file is a block device
1362 echo "Usage: _is_block_dev dev" 1>&2
1367 if [ -L "${_dev}" ]; then
1368 _dev=`readlink -f "${_dev}"`
1371 if [ -b "${_dev}" ]; then
1372 src/lstat64 "${_dev}" | $AWK_PROG '/Device type:/ { print $9 }'
1376 # Do a command, log it to $seqres.full, optionally test return status
1377 # and die if command fails. If called with one argument _do executes the
1378 # command, logs it, and returns its exit status. With two arguments _do
1379 # first prints the message passed in the first argument, and then "done"
1380 # or "fail" depending on the return status of the command passed in the
1381 # second argument. If the command fails and the variable _do_die_on_error
1382 # is set to "always" or the two argument form is used and _do_die_on_error
1383 # is set to "message_only" _do will print an error message to
1384 # $seqres.out and exit.
1388 if [ $# -eq 1 ]; then
1390 elif [ $# -eq 2 ]; then
1393 echo -n "$_note... "
1395 echo "Usage: _do [note] cmd" 1>&2
1399 (eval "echo '---' \"$_cmd\"") >>$seqres.full
1400 (eval "$_cmd") >$tmp._out 2>&1; ret=$?
1401 cat $tmp._out | _fix_malloc >>$seqres.full
1402 if [ $# -eq 2 ]; then
1403 if [ $ret -eq 0 ]; then
1410 && [ "$_do_die_on_error" = "always" \
1411 -o \( $# -eq 2 -a "$_do_die_on_error" = "message_only" \) ]
1413 [ $# -ne 2 ] && echo
1414 eval "echo \"$_cmd\" failed \(returned $ret\): see $seqres.full"
1421 # bail out, setting up .notrun file. Need to kill the filesystem check files
1422 # here, otherwise they are set incorrectly for the next test.
1426 echo "$*" > $seqres.notrun
1427 echo "$seq not run: $*"
1428 rm -f ${RESULT_DIR}/require_test
1429 rm -f ${RESULT_DIR}/require_scratch
1434 # just plain bail out
1438 echo "$*" | tee -a $seqres.full
1439 echo "(see $seqres.full for details)"
1444 # tests whether $FSTYP is one of the supported filesystems for a test
1450 if [ "$f" = "$FSTYP" -o "$f" = "generic" ]
1456 _notrun "not suitable for this filesystem type: $FSTYP"
1460 # tests whether $FSTYP is one of the supported OSes for a test
1466 if [ "$h" = "$HOSTOS" ]
1472 _notrun "not suitable for this OS: $HOSTOS"
1475 _require_btrfs_loadable()
1477 modprobe -r btrfs || _notrun "btrfs unloadable"
1478 modprobe btrfs || _notrun "Can't load btrfs"
1483 modprobe -r btrfs || _fail "btrfs unload failed"
1484 modprobe btrfs || _fail "btrfs load failed"
1487 # this test needs a scratch partition - check we're ok & unmount it
1488 # No post-test check of the device is required. e.g. the test intentionally
1489 # finishes the test with the filesystem in a corrupt state
1490 _require_scratch_nocheck()
1494 echo $SCRATCH_DEV | grep -q ":/" > /dev/null 2>&1
1495 if [ -z "$SCRATCH_DEV" -o "$?" != "0" ]; then
1496 _notrun "this test requires a valid \$SCRATCH_DEV"
1498 if [ ! -d "$SCRATCH_MNT" ]; then
1499 _notrun "this test requires a valid \$SCRATCH_MNT"
1503 echo $SCRATCH_DEV | grep -q "//" > /dev/null 2>&1
1504 if [ -z "$SCRATCH_DEV" -o "$?" != "0" ]; then
1505 _notrun "this test requires a valid \$SCRATCH_DEV"
1507 if [ ! -d "$SCRATCH_MNT" ]; then
1508 _notrun "this test requires a valid \$SCRATCH_MNT"
1512 if [ -z "$SCRATCH_DEV" -o ! -d "$SCRATCH_DEV" ]; then
1513 _notrun "this test requires a valid \$SCRATCH_DEV as ovl base dir"
1515 if [ ! -d "$SCRATCH_MNT" ]; then
1516 _notrun "this test requires a valid \$SCRATCH_MNT"
1520 if [ -z "$SCRATCH_DEV" -o ! -d "$SCRATCH_MNT" ];
1522 _notrun "this test requires a valid \$SCRATCH_MNT and unique $SCRATCH_DEV"
1526 if [ -z "$SCRATCH_DEV" -o "`_is_block_dev "$SCRATCH_DEV"`" = "" ]
1528 _notrun "this test requires a valid \$SCRATCH_DEV"
1530 if [ "`_is_block_dev "$SCRATCH_DEV"`" = "`_is_block_dev "$TEST_DEV"`" ]
1532 _notrun "this test requires a valid \$SCRATCH_DEV"
1534 if [ ! -d "$SCRATCH_MNT" ]
1536 _notrun "this test requires a valid \$SCRATCH_MNT"
1542 # Note that we use -F here so grep doesn't try to interpret an NFS over
1543 # IPv6 server as a regular expression.
1544 mount_rec=`_mount | grep -F $SCRATCH_DEV`
1547 # if it's mounted, make sure its on $SCRATCH_MNT
1548 if ! echo $mount_rec | grep -q $SCRATCH_MNT
1550 echo "\$SCRATCH_DEV=$SCRATCH_DEV is mounted but not on \$SCRATCH_MNT=$SCRATCH_MNT - aborting"
1551 echo "Already mounted result:"
1555 # and then unmount it
1556 if ! _scratch_unmount
1558 echo "failed to unmount $SCRATCH_DEV"
1562 rm -f ${RESULT_DIR}/require_scratch
1565 # we need the scratch device and it should be checked post test.
1568 _require_scratch_nocheck
1569 touch ${RESULT_DIR}/require_scratch
1573 # this test needs a test partition - check we're ok & mount it
1579 echo $TEST_DEV | grep -q ":/" > /dev/null 2>&1
1580 if [ -z "$TEST_DEV" -o "$?" != "0" ]; then
1581 _notrun "this test requires a valid \$TEST_DIR"
1583 if [ ! -d "$TEST_DIR" ]; then
1584 _notrun "this test requires a valid \$TEST_DIR"
1588 echo $TEST_DEV | grep -q "//" > /dev/null 2>&1
1589 if [ -z "$TEST_DEV" -o "$?" != "0" ]; then
1590 _notrun "this test requires a valid \$TEST_DEV"
1592 if [ ! -d "$TEST_DIR" ]; then
1593 _notrun "this test requires a valid \$TEST_DIR"
1597 if [ -z "$TEST_DEV" -o ! -d "$TEST_DEV" ]; then
1598 _notrun "this test requires a valid \$TEST_DEV as ovl base dir"
1600 if [ ! -d "$TEST_DIR" ]; then
1601 _notrun "this test requires a valid \$TEST_DIR"
1605 if [ -z "$TEST_DEV" -o ! -d "$TEST_DIR" ];
1607 _notrun "this test requires a valid \$TEST_DIR and unique $TEST_DEV"
1611 if [ -z "$TEST_DEV" ] || [ "`_is_block_dev "$TEST_DEV"`" = "" ]
1613 _notrun "this test requires a valid \$TEST_DEV"
1615 if [ "`_is_block_dev "$SCRATCH_DEV"`" = "`_is_block_dev "$TEST_DEV"`" ]
1617 _notrun "this test requires a valid \$TEST_DEV"
1619 if [ ! -d "$TEST_DIR" ]
1621 _notrun "this test requires a valid \$TEST_DIR"
1627 # Note that we use -F here so grep doesn't try to interpret an NFS over
1628 # IPv6 server as a regular expression.
1629 mount_rec=`_mount | grep -F $TEST_DEV`
1632 # if it's mounted, make sure its on $TEST_DIR
1633 if ! echo $mount_rec | grep -q $TEST_DIR
1635 echo "\$TEST_DEV=$TEST_DEV is mounted but not on \$TEST_DIR=$TEST_DIR - aborting"
1636 echo "Already mounted result:"
1641 out=`_mount_or_remount_rw "$MOUNT_OPTIONS" $TEST_DEV $TEST_DIR`
1642 if [ $? -ne 1 ]; then
1647 touch ${RESULT_DIR}/require_test
1650 # this test needs a logdev
1654 [ -z "$SCRATCH_LOGDEV" -o ! -b "$SCRATCH_LOGDEV" ] && \
1655 _notrun "This test requires a valid \$SCRATCH_LOGDEV"
1656 [ "$USE_EXTERNAL" != yes ] && \
1657 _notrun "This test requires USE_EXTERNAL to be enabled"
1659 # ensure its not mounted
1660 $UMOUNT_PROG $SCRATCH_LOGDEV 2>/dev/null
1663 # this test requires loopback device support
1667 if [ "$HOSTOS" != "Linux" ]
1669 _notrun "This test requires linux for loopback device support"
1672 modprobe loop >/dev/null 2>&1
1673 if grep loop /proc/devices >/dev/null 2>&1
1677 _notrun "This test requires loopback device support"
1681 # this test requires ext2 filesystem support
1685 if [ "$HOSTOS" != "Linux" ]
1687 _notrun "This test requires linux for ext2 filesystem support"
1690 modprobe ext2 >/dev/null 2>&1
1691 if grep ext2 /proc/filesystems >/dev/null 2>&1
1695 _notrun "This test requires ext2 filesystem support"
1699 # this test requires that (large) loopback device files are not in use
1701 _require_no_large_scratch_dev()
1703 [ "$LARGE_SCRATCH_DEV" = yes ] && \
1704 _notrun "Large filesystem testing in progress, skipped this test"
1707 # this test requires that a realtime subvolume is in use, and
1708 # that the kernel supports realtime as well.
1712 [ "$USE_EXTERNAL" = yes ] || \
1713 _notrun "External volumes not in use, skipped this test"
1714 [ "$SCRATCH_RTDEV" = "" ] && \
1715 _notrun "Realtime device required, skipped this test"
1718 # this test requires that a specified command (executable) exists
1719 # $1 - command, $2 - name for error message
1721 # Note: the command string might have parameters, so strip them before checking
1722 # whether it is executable.
1725 if [ $# -eq 2 ]; then
1727 elif [ $# -eq 1 ]; then
1730 _fail "usage: _require_command <command> [<name>]"
1733 _command=`echo "$1" | awk '{ print $1 }'`
1734 if [ ! -x "$_command" ]; then
1735 _notrun "$_name utility required, skipped this test"
1739 # this test requires the device to be valid block device
1741 _require_block_device()
1743 if [ -z "$1" ]; then
1744 echo "Usage: _require_block_device <dev>" 1>&2
1747 if [ "`_is_block_dev "$1"`" == "" ]; then
1748 _notrun "require $1 to be valid block disk"
1752 # brd based ram disks erase the device when they receive a flush command when no
1753 # active references are present. This causes problems for DM devices sitting on
1754 # top of brd devices as DM doesn't hold active references to the brd device.
1755 _require_sane_bdev_flush()
1757 echo $1 | grep -q "^/dev/ram[0-9]\+$"
1758 if [ $? -eq 0 ]; then
1759 _notrun "This test requires a sane block device flush"
1763 # this test requires a specific device mapper target
1764 _require_dm_target()
1768 # require SCRATCH_DEV to be a valid block device with sane BLKFLSBUF
1770 _require_block_device $SCRATCH_DEV
1771 _require_sane_bdev_flush $SCRATCH_DEV
1772 _require_command "$DMSETUP_PROG" dmsetup
1774 modprobe dm-$_target >/dev/null 2>&1
1776 $DMSETUP_PROG targets 2>&1 | grep -q ^$_target
1777 if [ $? -ne 0 ]; then
1778 _notrun "This test requires dm $_target support"
1782 # this test requires the projid32bit feature to be available in mkfs.xfs.
1784 _require_projid32bit()
1786 _scratch_mkfs_xfs_supported -i projid32bit=1 >/dev/null 2>&1 \
1787 || _notrun "mkfs.xfs doesn't have projid32bit feature"
1790 _require_projid16bit()
1792 _scratch_mkfs_xfs_supported -i projid32bit=0 >/dev/null 2>&1 \
1793 || _notrun "16 bit project IDs not supported on $SCRATCH_DEV"
1796 # this test requires the crc feature to be available in mkfs.xfs
1798 _require_xfs_mkfs_crc()
1800 _scratch_mkfs_xfs_supported -m crc=1 >/dev/null 2>&1 \
1801 || _notrun "mkfs.xfs doesn't have crc feature"
1804 # this test requires the xfs kernel support crc feature
1808 _scratch_mkfs_xfs -m crc=1 >/dev/null 2>&1
1809 _scratch_mount >/dev/null 2>&1 \
1810 || _notrun "Kernel doesn't support crc feature"
1814 # this test requires the ext4 kernel support crc feature on scratch device
1816 _require_scratch_ext4_crc()
1818 _scratch_mkfs_ext4 >/dev/null 2>&1
1819 dumpe2fs -h $SCRATCH_DEV 2> /dev/null | grep -q metadata_csum || _notrun "metadata_csum not supported by this filesystem"
1820 _scratch_mount >/dev/null 2>&1 \
1821 || _notrun "Kernel doesn't support metadata_csum feature"
1825 # this test requires the xfs kernel support crc feature on scratch device
1827 _require_scratch_xfs_crc()
1829 _scratch_mkfs_xfs >/dev/null 2>&1
1830 _scratch_mount >/dev/null 2>&1 \
1831 || _notrun "Kernel doesn't support crc feature"
1832 xfs_info $SCRATCH_MNT | grep -q 'crc=1' || _notrun "crc feature not supported by this filesystem"
1836 # this test requires the bigalloc feature to be available in mkfs.ext4
1838 _require_ext4_mkfs_bigalloc()
1840 $MKFS_EXT4_PROG -F -O bigalloc -n $SCRATCH_DEV 512m >/dev/null 2>&1 \
1841 || _notrun "mkfs.ext4 doesn't have bigalloc feature"
1844 # this test requires the ext4 kernel support bigalloc feature
1846 _require_ext4_bigalloc()
1848 $MKFS_EXT4_PROG -F -O bigalloc $SCRATCH_DEV 512m >/dev/null 2>&1
1849 _scratch_mount >/dev/null 2>&1 \
1850 || _notrun "Ext4 kernel doesn't support bigalloc feature"
1854 # this test requires the finobt feature to be available in mkfs.xfs
1856 _require_xfs_mkfs_finobt()
1858 _scratch_mkfs_xfs_supported -m crc=1,finobt=1 >/dev/null 2>&1 \
1859 || _notrun "mkfs.xfs doesn't have finobt feature"
1862 # this test requires the xfs kernel support finobt feature
1864 _require_xfs_finobt()
1866 _scratch_mkfs_xfs -m crc=1,finobt=1 >/dev/null 2>&1
1867 _scratch_mount >/dev/null 2>&1 \
1868 || _notrun "Kernel doesn't support finobt feature"
1872 # this test requires xfs sysfs attribute support
1874 _require_xfs_sysfs()
1877 sysfsdir=/sys/fs/xfs
1879 if [ ! -e $sysfsdir ]; then
1880 _notrun "no kernel support for XFS sysfs attributes"
1883 if [ ! -z $1 ] && [ ! -e $sysfsdir/$attr ]; then
1884 _notrun "sysfs attribute '$attr' is not supported"
1888 # this test requires the xfs sparse inode feature
1890 _require_xfs_sparse_inodes()
1892 _scratch_mkfs_xfs_supported -m crc=1 -i sparse > /dev/null 2>&1 \
1893 || _notrun "mkfs.xfs does not support sparse inodes"
1894 _scratch_mkfs_xfs -m crc=1 -i sparse > /dev/null 2>&1
1895 _scratch_mount >/dev/null 2>&1 \
1896 || _notrun "kernel does not support sparse inodes"
1900 # this test requires that external log/realtime devices are not in use
1902 _require_nonexternal()
1904 [ "$USE_EXTERNAL" = yes ] && \
1905 _notrun "External device testing in progress, skipped this test"
1908 # this test requires that a (specified) aio-dio executable exists
1909 # $1 - command (optional)
1915 AIO_TEST=src/aio-dio-regress/aiodio_sparse2
1916 [ -x $AIO_TEST ] || _notrun "aio-dio utilities required"
1918 AIO_TEST=src/aio-dio-regress/$1
1919 [ -x $AIO_TEST ] || _notrun "$AIO_TEST not built"
1924 # this test requires that a test program exists under src/
1925 # $1 - command (require)
1927 _require_test_program()
1930 [ -x $SRC_TEST ] || _notrun "$SRC_TEST not built"
1933 # run an aio-dio program
1939 echo "usage: _run_aiodio command_name" 2>&1
1945 local testtemp=$TEST_DIR/aio-testfile
1947 $AIO_TEST $testtemp 2>&1
1954 # indicate whether YP/NIS is active or not
1959 dn=$(domainname 2>/dev/null)
1960 test -n "${dn}" -a "${dn}" != "(none)"
1964 # cat the password file
1968 [ $(_yp_active) -eq 0 ] && ypcat passwd
1972 # cat the group file
1976 [ $(_yp_active) -eq 0 ] && ypcat group
1980 # check for a user on the machine, fsgqa as default
1988 _cat_passwd | grep -q $qa_user
1989 [ "$?" == "0" ] || _notrun "$qa_user user not defined."
1990 echo /bin/true | su $qa_user
1991 [ "$?" == "0" ] || _notrun "$qa_user cannot execute commands."
1994 # check for a group on the machine, fsgqa as default
2002 _cat_group | grep -q $qa_group
2003 [ "$?" == "0" ] || _notrun "$qa_group user not defined."
2009 s,.*Permission\sdenied.*,Permission denied,;
2010 s,.*no\saccess\sto\stty.*,,;
2011 s,.*no\sjob\scontrol\sin\sthis\sshell.*,,;
2018 if [ "$HOSTOS" == "IRIX" ]
2020 echo $1 | /bin/bash "su $qa_user 2>&1" | _filter_user_do
2022 echo $1 | su $qa_user 2>&1 | _filter_user_do
2026 _require_xfs_io_command()
2030 echo "Usage: _require_xfs_io_command command [switch]" 1>&2
2037 testfile=$TEST_DIR/$$.xfs_io
2040 testio=`$XFS_IO_PROG -F -f -c "chproj 0" $testfile 2>&1`
2043 testio=`$XFS_IO_PROG -F -f -c "falloc 0 1m" $testfile 2>&1`
2045 "fpunch" | "fcollapse" | "zero" | "fzero" | "finsert" )
2046 testio=`$XFS_IO_PROG -F -f -c "pwrite 0 20k" -c "fsync" \
2047 -c "$command 4k 8k" $testfile 2>&1`
2050 testio=`$XFS_IO_PROG -F -f -c "pwrite 0 20k" -c "fsync" \
2051 -c "fiemap -v" $testfile 2>&1`
2054 testio=`$XFS_IO_PROG -T -F -c "flink $testfile" \
2056 echo $testio | egrep -q "invalid option|Is a directory" && \
2057 _notrun "xfs_io $command support is missing"
2060 testio=`$XFS_IO_PROG -f -c "fsmap" $testfile 2>&1`
2061 echo $testio | egrep -q "Inappropriate ioctl" && \
2062 _notrun "xfs_io $command support is missing"
2065 testio=`$XFS_IO_PROG -c "$command help" 2>&1`
2068 rm -f $testfile 2>&1 > /dev/null
2069 echo $testio | grep -q "not found" && \
2070 _notrun "xfs_io $command support is missing"
2071 echo $testio | grep -q "Operation not supported" && \
2072 _notrun "xfs_io $command failed (old kernel/wrong fs?)"
2073 echo $testio | grep -q "foreign file active" && \
2074 _notrun "xfs_io $command not supported on $FSTYP"
2076 test -z "$param" && return
2077 $XFS_IO_PROG -c "help $command" | grep -q "^ $param --" || \
2078 _notrun "xfs_io $command doesn't support $param"
2081 # check that xfs_db supports a specific command
2082 _require_xfs_db_command()
2086 echo "Usage: _require_xfs_db_command command" 1>&2
2091 _scratch_xfs_db -x -c "help" | grep $command > /dev/null || \
2092 _notrun "xfs_db $command support is missing"
2095 # check that kernel and filesystem support direct I/O
2098 if [ $FSTYP = "ext4" ] ; then
2099 if echo "$MOUNT_OPTIONS" | grep -q "test_dummy_encryption"; then
2100 _notrun "ext4 encryption doesn't support O_DIRECT"
2103 testfile=$TEST_DIR/$$.direct
2104 $XFS_IO_PROG -F -f -d -c "pwrite 0 20k" $testfile > /dev/null 2>&1
2105 if [ $? -ne 0 ]; then
2106 _notrun "O_DIRECT is not supported"
2108 rm -f $testfile 2>&1 > /dev/null
2111 # Check that a fs has enough free space (in 1024b blocks)
2116 BLOCKS=$2 # in units of 1024
2117 let GB=$BLOCKS/1024/1024
2119 FREE_BLOCKS=`df -kP $MNT | grep -v Filesystem | awk '{print $4}'`
2120 [ $FREE_BLOCKS -lt $BLOCKS ] && \
2121 _notrun "This test requires at least ${GB}GB free on $MNT to run"
2125 # Check if the filesystem supports sparse files.
2127 # Unfortunately there is no better way to do this than a manual black list.
2129 _require_sparse_files()
2133 _notrun "Sparse files not supported by this filesystem type: $FSTYP"
2142 #boot_params always present in debugfs
2143 [ -d "$DEBUGFS_MNT/boot_params" ] || _notrun "Debugfs not mounted"
2146 _require_fail_make_request()
2148 [ -f "$DEBUGFS_MNT/fail_make_request/probability" ] \
2149 || _notrun "$DEBUGFS_MNT/fail_make_request \
2150 not found. Seems that CONFIG_FAIL_MAKE_REQUEST kernel config option not enabled"
2154 # Check if the file system supports seek_data/hole
2156 _require_seek_data_hole()
2158 testfile=$TEST_DIR/$$.seek
2159 testseek=`$here/src/seek_sanity_test -t $testfile 2>&1`
2160 rm -f $testfile &>/dev/null
2161 echo $testseek | grep -q "Kernel does not support" && \
2162 _notrun "File system does not support llseek(2) SEEK_DATA/HOLE"
2167 _require_test_program "runas"
2172 "$here/src/runas" "$@"
2175 _require_richacl_prog()
2177 _require_command "$GETRICHACL_PROG" getrichacl
2178 _require_command "$SETRICHACL_PROG" setrichacl
2181 _require_scratch_richacl_xfs()
2183 _scratch_mkfs_xfs_supported -m richacl=1 >/dev/null 2>&1 \
2184 || _notrun "mkfs.xfs doesn't have richacl feature"
2185 _scratch_mkfs_xfs -m richacl=1 >/dev/null 2>&1
2186 _scratch_mount >/dev/null 2>&1 \
2187 || _notrun "kernel doesn't support richacl feature on $FSTYP"
2191 _require_scratch_richacl_ext4()
2193 _scratch_mkfs -O richacl >/dev/null 2>&1 \
2194 || _notrun "can't mkfs $FSTYP with option -O richacl"
2195 _scratch_mount >/dev/null 2>&1 \
2196 || _notrun "kernel doesn't support richacl feature on $FSTYP"
2200 _require_scratch_richacl_support()
2203 $GETFATTR_PROG -n system.richacl >/dev/null 2>&1 \
2204 || _notrun "this test requires richacl support on \$SCRATCH_DEV"
2208 _require_scratch_richacl()
2211 xfs) _require_scratch_richacl_xfs
2213 ext4) _require_scratch_richacl_ext4
2216 _require_scratch_richacl_support
2218 *) _notrun "this test requires richacl support on \$SCRATCH_DEV"
2223 _scratch_mkfs_richacl()
2226 xfs) _scratch_mkfs_xfs -m richacl=1
2228 ext4) _scratch_mkfs -O richacl
2236 # check that a FS on a device is mounted
2237 # if so, return mount point
2243 echo "Usage: _is_mounted device" 1>&2
2249 if _mount | grep "$device " | $AWK_PROG -v pattern="type $FSTYP" '
2250 pattern { print $3 ; exit 0 }
2254 echo "_is_mounted: $device is not a mounted $FSTYP FS"
2259 # remount a FS to a new mode (ro or rw)
2265 echo "Usage: _remount device ro/rw" 1>&2
2271 if ! mount -o remount,$mode $device
2273 echo "_remount: failed to remount filesystem on $device as $mode"
2278 # Run the appropriate repair/check on a filesystem
2280 # if the filesystem is mounted, it's either remounted ro before being
2281 # checked or it's unmounted and then remounted
2284 # If set, we remount ro instead of unmounting for fsck
2287 _umount_or_remount_ro()
2291 echo "Usage: _umount_or_remount_ro <device>" 1>&2
2296 mountpoint=`_is_mounted $device`
2298 if [ $USE_REMOUNT -eq 0 ]; then
2299 $UMOUNT_PROG $device
2306 _mount_or_remount_rw()
2308 if [ $# -ne 3 ]; then
2309 echo "Usage: _mount_or_remount_rw <opts> <dev> <mnt>" 1>&2
2316 if [ $USE_REMOUNT -eq 0 ]; then
2317 if [ "$FSTYP" != "overlay" ]; then
2318 _mount -t $FSTYP $mount_opts $device $mountpoint
2320 _overlay_mount $device $mountpoint
2322 if [ $? -ne 0 ]; then
2323 echo "!!! failed to remount $device on $mountpoint"
2333 # Check a generic filesystem in no-op mode; this assumes that the
2334 # underlying fsck program accepts "-n" for a no-op (check-only) run,
2335 # and that it will still return an errno for corruption in this mode.
2337 # Filesystems which don't support this will need to define their
2338 # own check routine.
2340 _check_generic_filesystem()
2344 # If type is set, we're mounted
2345 type=`_fs_type $device`
2348 if [ "$type" = "$FSTYP" ]
2351 mountpoint=`_umount_or_remount_ro $device`
2354 fsck -t $FSTYP $FSCK_OPTIONS $device >$tmp.fsck 2>&1
2357 echo "_check_generic_filesystem: filesystem on $device is inconsistent (see $seqres.full)"
2359 echo "_check_generic filesystem: filesystem on $device is inconsistent" >>$seqres.full
2360 echo "*** fsck.$FSTYP output ***" >>$seqres.full
2361 cat $tmp.fsck >>$seqres.full
2362 echo "*** end fsck.$FSTYP output" >>$seqres.full
2370 echo "*** mount output ***" >>$seqres.full
2371 _mount >>$seqres.full
2372 echo "*** end mount output" >>$seqres.full
2373 elif [ "$type" = "$FSTYP" ]
2376 _mount_or_remount_rw "$MOUNT_OPTIONS" $device $mountpoint
2380 if [ $ok -eq 0 ]; then
2382 if [ "$iam" != "check" ]; then
2391 # run xfs_check and friends on a FS.
2393 _check_xfs_filesystem()
2397 echo "Usage: _check_xfs_filesystem device <logdev>|none <rtdev>|none" 1>&2
2401 extra_mount_options=""
2402 extra_log_options=""
2405 if [ -f $device ];then
2409 if [ "$2" != "none" ]; then
2410 extra_log_options="-l$2"
2411 extra_mount_options="-ologdev=$2"
2414 if [ "$3" != "none" ]; then
2415 extra_rt_options="-r$3"
2416 extra_mount_options=$extra_mount_options" -ortdev=$3"
2418 extra_mount_options=$extra_mount_options" $MOUNT_OPTIONS"
2420 [ "$FSTYP" != xfs ] && return 0
2422 type=`_fs_type $device`
2425 if [ "$type" = "xfs" ]
2427 if [ -n "$TEST_XFS_SCRUB" ] && [ -x "$XFS_SCRUB_PROG" ]; then
2428 "$XFS_SCRUB_PROG" $scrubflag -vd $device >>$seqres.full
2429 if [ $? -ne 0 ]; then
2430 echo "filesystem on $device failed scrub (see $seqres.full)"
2435 mountpoint=`_umount_or_remount_ro $device`
2438 $XFS_LOGPRINT_PROG -t $extra_log_options $device 2>&1 \
2439 | tee $tmp.logprint | grep -q "<CLEAN>"
2440 if [ $? -ne 0 -a "$HOSTOS" = "Linux" ]
2442 echo "_check_xfs_filesystem: filesystem on $device has dirty log (see $seqres.full)"
2444 echo "_check_xfs_filesystem: filesystem on $device has dirty log" >>$seqres.full
2445 echo "*** xfs_logprint -t output ***" >>$seqres.full
2446 cat $tmp.logprint >>$seqres.full
2447 echo "*** end xfs_logprint output" >>$seqres.full
2452 # xfs_check runs out of memory on large files, so even providing the test
2453 # option (-t) to avoid indexing the free space trees doesn't make it pass on
2454 # large filesystems. Avoid it.
2455 if [ "$LARGE_SCRATCH_DEV" != yes ]; then
2456 _xfs_check $extra_log_options $device 2>&1 |\
2457 _fix_malloc >$tmp.fs_check
2459 if [ -s $tmp.fs_check ]
2461 echo "_check_xfs_filesystem: filesystem on $device is inconsistent (c) (see $seqres.full)"
2463 echo "_check_xfs_filesystem: filesystem on $device is inconsistent" >>$seqres.full
2464 echo "*** xfs_check output ***" >>$seqres.full
2465 cat $tmp.fs_check >>$seqres.full
2466 echo "*** end xfs_check output" >>$seqres.full
2471 $XFS_REPAIR_PROG -n $extra_options $extra_log_options $extra_rt_options $device >$tmp.repair 2>&1
2474 echo "_check_xfs_filesystem: filesystem on $device is inconsistent (r) (see $seqres.full)"
2476 echo "_check_xfs_filesystem: filesystem on $device is inconsistent" >>$seqres.full
2477 echo "*** xfs_repair -n output ***" >>$seqres.full
2478 cat $tmp.repair | _fix_malloc >>$seqres.full
2479 echo "*** end xfs_repair output" >>$seqres.full
2483 rm -f $tmp.fs_check $tmp.logprint $tmp.repair
2485 # Optionally test the index rebuilding behavior.
2486 if [ -n "$TEST_XFS_REPAIR_REBUILD" ]; then
2487 $XFS_REPAIR_PROG $extra_options $extra_log_options $extra_rt_options $device >$tmp.repair 2>&1
2488 if [ $? -ne 0 ]; then
2489 echo "_check_xfs_filesystem: filesystem on $device is inconsistent (rebuild) (see $seqres.full)"
2491 echo "_check_xfs_filesystem: filesystem on $device is inconsistent (rebuild)" >>$seqres.full
2492 echo "*** xfs_repair output ***" >>$seqres.full
2493 cat $tmp.repair | _fix_malloc >>$seqres.full
2494 echo "*** end xfs_repair output" >>$seqres.full
2500 $XFS_REPAIR_PROG -n $extra_options $extra_log_options $extra_rt_options $device >$tmp.repair 2>&1
2501 if [ $? -ne 0 ]; then
2502 echo "_check_xfs_filesystem: filesystem on $device is inconsistent (rebuild-reverify) (see $seqres.full)"
2504 echo "_check_xfs_filesystem: filesystem on $device is inconsistent (rebuild-reverify)" >>$seqres.full
2505 echo "*** xfs_repair -n output ***" >>$seqres.full
2506 cat $tmp.repair | _fix_malloc >>$seqres.full
2507 echo "*** end xfs_repair output" >>$seqres.full
2516 echo "*** mount output ***" >>$seqres.full
2517 _mount >>$seqres.full
2518 echo "*** end mount output" >>$seqres.full
2519 elif [ "$type" = "xfs" ]
2521 _mount_or_remount_rw "$extra_mount_options" $device $mountpoint
2524 if [ $ok -eq 0 ]; then
2526 if [ "$iam" != "check" ]; then
2535 # Filter the knowen errors the UDF Verifier reports.
2536 _udf_test_known_error_filter()
2538 egrep -v "PVD 60 Error: Interchange Level: 1, Maximum Interchange Level: 0|FSD 28 Error: Interchange Level: 1, Maximum Interchange Level: 1,|PVD 72 Warning: Volume Set Identifier: \"\*IRIX UDF\",|Warning: [0-9]+ unused blocks NOT marked as unallocated."
2542 _check_udf_filesystem()
2544 [ "$DISABLE_UDF_TEST" == "1" ] && return
2546 if [ $# -ne 1 -a $# -ne 2 ]
2548 echo "Usage: _check_udf_filesystem device [last_block]" 1>&2
2552 if [ ! -x $here/src/udf_test ]
2554 echo "udf_test not installed, please download and build the Philips"
2555 echo "UDF Verification Software from http://www.extra.research.philips.com/udf/."
2556 echo "Then copy the udf_test binary to $here/src/."
2557 echo "If you do not wish to run udf_test then set environment variable DISABLE_UDF_TEST"
2565 LAST_BLOCK=`expr \( $2 - 1 \)`
2566 OPT_ARG="-lastvalidblock $LAST_BLOCK"
2569 rm -f $seqres.checkfs
2570 sleep 1 # Due to a problem with time stamps in udf_test
2571 $here/src/udf_test $OPT_ARG $device | tee $seqres.checkfs | egrep "Error|Warning" | \
2572 _udf_test_known_error_filter | \
2573 egrep -iv "Error count:.*[0-9]+.*total occurrences:.*[0-9]+|Warning count:.*[0-9]+.*total occurrences:.*[0-9]+" && \
2574 echo "Warning UDF Verifier reported errors see $seqres.checkfs." && return 1
2578 _check_xfs_test_fs()
2582 [ "$USE_EXTERNAL" = yes -a ! -z "$TEST_LOGDEV" ] && \
2583 TEST_LOG="$TEST_LOGDEV"
2585 [ "$USE_EXTERNAL" = yes -a ! -z "$TEST_RTDEV" ] && \
2586 TEST_RT="$TEST_RTDEV"
2588 _check_xfs_filesystem $TEST_DEV $TEST_LOG $TEST_RT
2590 # check for ipath consistency
2591 if $XFS_GROWFS_PROG -n $TEST_DIR | grep -q 'inode-paths=1'; then
2592 # errors go to stderr
2593 xfs_check_ipaths $TEST_DIR >/dev/null
2594 xfs_repair_ipaths -n $TEST_DIR >/dev/null
2598 _check_btrfs_filesystem()
2602 # If type is set, we're mounted
2603 type=`_fs_type $device`
2606 if [ "$type" = "$FSTYP" ]
2609 mountpoint=`_umount_or_remount_ro $device`
2612 btrfsck $device >$tmp.fsck 2>&1
2615 echo "_check_btrfs_filesystem: filesystem on $device is inconsistent (see $seqres.full)"
2617 echo "_check_btrfs_filesystem: filesystem on $device is inconsistent" >>$seqres.full
2618 echo "*** fsck.$FSTYP output ***" >>$seqres.full
2619 cat $tmp.fsck >>$seqres.full
2620 echo "*** end fsck.$FSTYP output" >>$seqres.full
2628 echo "*** mount output ***" >>$seqres.full
2629 _mount >>$seqres.full
2630 echo "*** end mount output" >>$seqres.full
2631 elif [ "$type" = "$FSTYP" ]
2634 _mount_or_remount_rw "$MOUNT_OPTIONS" $device $mountpoint
2638 if [ $ok -eq 0 ]; then
2640 if [ "$iam" != "check" ]; then
2656 # no way to check consistency for nfs
2659 # no way to check consistency for cifs
2662 # no way to check consistency for overlay
2665 # do nothing for now
2668 _check_btrfs_filesystem $TEST_DEV
2671 # no way to check consistency for tmpfs
2674 _check_generic_filesystem $TEST_DEV
2682 [ $# -eq 1 ] && device=$1
2688 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
2689 SCRATCH_LOG="$SCRATCH_LOGDEV"
2691 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_RTDEV" ] && \
2692 SCRATCH_RT="$SCRATCH_RTDEV"
2694 _check_xfs_filesystem $device $SCRATCH_LOG $SCRATCH_RT
2697 _check_udf_filesystem $device $udf_fsize
2700 # Don't know how to check an NFS filesystem, yet.
2703 # Don't know how to check a CIFS filesystem, yet.
2706 # no way to check consistency for overlay
2709 _check_btrfs_filesystem $device
2712 # no way to check consistency for tmpfs
2715 _check_generic_filesystem $device
2720 _full_fstyp_details()
2722 [ -z "$FSTYP" ] && FSTYP=xfs
2723 if [ $FSTYP = xfs ]; then
2724 if [ -d /proc/fs/xfs ]; then
2725 if grep -q 'debug 0' /proc/fs/xfs/stat; then
2726 FSTYP="$FSTYP (non-debug)"
2727 elif grep -q 'debug 1' /proc/fs/xfs/stat; then
2728 FSTYP="$FSTYP (debug)"
2731 if uname -a | grep -qi 'debug'; then
2732 FSTYP="$FSTYP (debug)"
2734 FSTYP="$FSTYP (non-debug)"
2741 _full_platform_details()
2747 echo "$os/$platform $host $kernel"
2752 if [ "`uname`" == "IRIX64" ] || [ "`uname`" == "IRIX" ]; then
2754 elif [ "`uname`" == "Linux" ]; then
2757 echo Unknown operating system: `uname`
2762 _link_out_file_named()
2767 my $feature, $result, $suffix, $opts;
2769 foreach $feature (split(/,/, $ENV{"FEATURES"})) {
2770 $feathash{$feature} = 1;
2772 $result = "default";
2777 ($opts, $suffix) = split(/ *: */);
2778 foreach my $opt (split(/,/, $opts)) {
2779 if (!exists($feathash{$opt})) {
2793 ln -fs $SRC.$SUFFIX $1
2798 if [ $# -eq 0 ]; then
2799 FEATURES="$(_get_os_name)"
2800 if [ -n "$MOUNT_OPTIONS" ]; then
2801 FEATURES=$FEATURES,${MOUNT_OPTIONS##"-o "}
2807 _link_out_file_named $seqfull.out "$FEATURES"
2816 #takes files, randomdata
2824 if [ $size -gt 0 ]; then
2825 if [ "$2" == "false" ]; then
2826 dd if=/dev/zero of=$file bs=1024 count=$size 2>&1 | _filter_dd
2828 dd if=/dev/urandom of=$file bs=1024 count=$size 2>&1 | _filter_dd
2835 # takes dirname, depth, randomdata
2838 dirname=$1; depth=$2; randomdata=$3
2839 mkdir $dirname || die "mkdir $dirname failed"
2842 _nfiles $files $randomdata # files for this dir and data type
2844 [ $depth -eq 0 ] && return
2845 let deep=$depth-1 # go 1 down
2847 [ $verbose = true ] && echo "descending, depth from leaves = $deep"
2850 while [ $d -lt $dirs ]
2852 _descend d$d $deep &
2858 # Populate a filesystem with inodes for performance experiments
2860 # usage: populate [-v] [-n ndirs] [-f nfiles] [-d depth] [-r root] [-s size] [-x]
2865 dirs=5 # ndirs in each subdir till leaves
2866 size=0 # sizeof files in K
2867 files=100 # num files in _each_ subdir
2868 depth=2 # depth of tree from root to leaves
2870 root=root # path of initial root of directory tree
2871 randomdata=false # -x data type urandom or zero
2874 while getopts "d:f:n:r:s:v:x" c
2883 x) randomdata=true;;
2887 _descend $root $depth $randomdata
2892 [ $verbose = true ] && echo done
2895 # query whether the given file has the given inode flag set
2902 if which $XFS_IO_PROG >/dev/null; then
2903 if $XFS_IO_PROG -r -c 'lsattr -v' "$file" | grep -q "$flag" ; then
2910 # query the given files extsize allocator hint in bytes (if any)
2917 if which $XFS_IO_PROG >/dev/null; then
2918 blocks=`$XFS_IO_PROG -r -c 'stat' "$file" | \
2919 awk '/^xattr.extsize =/ { print $3 }'`
2921 [ -z "$blocks" ] && blocks="0"
2925 # scratch_dev_pool should contain the disks pool for the btrfs raid
2926 _require_scratch_dev_pool()
2931 if [ -z "$SCRATCH_DEV_POOL" ]; then
2932 _notrun "this test requires a valid \$SCRATCH_DEV_POOL"
2935 if [ -z "$1" ]; then
2941 # btrfs test case needs ndevs or more scratch_dev_pool; other FS not sure
2945 if [ "`echo $SCRATCH_DEV_POOL|wc -w`" -lt $ndevs ]; then
2946 _notrun "btrfs and this test needs $ndevs or more disks in SCRATCH_DEV_POOL"
2950 _notrun "dev_pool is not supported by fstype \"$FSTYP\""
2954 for i in $SCRATCH_DEV_POOL; do
2955 if [ "`_is_block_dev "$i"`" = "" ]; then
2956 _notrun "this test requires valid block disk $i"
2958 if [ "`_is_block_dev "$i"`" = "`_is_block_dev "$TEST_DEV"`" ]; then
2959 _notrun "$i is part of TEST_DEV, this test requires unique disks"
2961 if _mount | grep -q $i; then
2962 if ! $UMOUNT_PROG $i; then
2963 echo "failed to unmount $i - aborting"
2967 # to help better debug when something fails, we remove
2968 # traces of previous btrfs FS on the dev.
2969 dd if=/dev/zero of=$i bs=4096 count=100 > /dev/null 2>&1
2973 # ensure devices in SCRATCH_DEV_POOL are of the same size
2974 # must be called after _require_scratch_dev_pool
2975 _require_scratch_dev_pool_equal_size()
2981 # SCRATCH_DEV has been set to the first device in SCRATCH_DEV_POOL
2982 _size=`_get_device_size $SCRATCH_DEV`
2983 for _dev in $SCRATCH_DEV_POOL; do
2984 _newsize=`_get_device_size $_dev`
2985 if [ $_size -ne $_newsize ]; then
2986 _notrun "This test requires devices in SCRATCH_DEV_POOL have the same size"
2991 # We will check if the device is deletable
2992 _require_deletable_scratch_dev_pool()
2996 for i in $SCRATCH_DEV_POOL; do
2997 x=`echo $i | cut -d"/" -f 3`
2998 if [ ! -f /sys/class/block/${x}/device/delete ]; then
2999 _notrun "$i is a device which is not deletable"
3004 # We check for btrfs and (optionally) features of the btrfs command
3008 _require_command "$BTRFS_UTIL_PROG" btrfs
3009 if [ -z "$1" ]; then
3012 $BTRFS_UTIL_PROG $cmd --help >/dev/null 2>&1
3013 [ $? -eq 0 ] || _notrun "$BTRFS_UTIL_PROG too old (must support $cmd)"
3016 # Check that fio is present, and it is able to execute given jobfile
3021 _require_command "$FIO_PROG" fio
3022 if [ -z "$1" ]; then
3026 $FIO_PROG --warnings-fatal --showcmd $job >> $seqres.full 2>&1
3027 [ $? -eq 0 ] || _notrun "$FIO_PROG too old, see $seqres.full"
3030 # Does freeze work on this fs?
3033 xfs_freeze -f "$TEST_DIR" >/dev/null 2>&1
3035 xfs_freeze -u "$TEST_DIR" >/dev/null 2>&1
3036 [ $result -eq 0 ] || _notrun "$FSTYP does not support freezing"
3039 # Does shutdown work on this fs?
3040 _require_scratch_shutdown()
3042 [ -x src/godown ] || _notrun "src/godown executable not found"
3044 _scratch_mkfs > /dev/null 2>&1
3046 src/godown -f $SCRATCH_MNT 2>&1 \
3047 || _notrun "$FSTYP does not support shutdown"
3051 # Does norecovery support by this fs?
3052 _require_norecovery()
3054 _scratch_mount -o ro,norecovery || \
3055 _notrun "$FSTYP does not support norecovery"
3059 # Does this filesystem support metadata journaling?
3060 # We exclude ones here that don't; otherwise we assume that it does, so the
3061 # test will run, fail, and motivate someone to update this test for a new
3064 # It's possible that TEST_DEV and SCRATCH_DEV have different features (it'd be
3065 # odd, but possible) so check $TEST_DEV by default, but we can optionall pass
3067 _require_metadata_journaling()
3077 _notrun "$FSTYP does not support metadata journaling"
3080 # ext4 could be mkfs'd without a journal...
3082 $DUMPE2FS_PROG -h $DEV 2>&1 | grep -q has_journal || \
3083 _notrun "$FSTYP on $DEV not configured with metadata journaling"
3084 # ext4 might not load a journal
3085 _exclude_scratch_mount_option "noload"
3088 # by default we pass; if you need to, add your fs above!
3093 # Does fiemap support?
3096 _require_xfs_io_command "fiemap"
3101 $XFS_IO_PROG -c "fiemap" $1 | tail -n +2 | grep -v hole | wc -l
3106 $XFS_IO_PROG -c "fiemap" $1 | tail -n +2 | grep hole | wc -l
3109 # arg 1 is dev to remove and is output of the below eg.
3110 # ls -l /sys/class/block/sdd | rev | cut -d "/" -f 3 | rev
3116 echo 1 > /sys/class/scsi_device/${lun}/device/delete || _fail "Remove disk failed"
3118 stat $disk > /dev/null 2>&1
3119 while [ $? -eq 0 ]; do
3121 stat $disk > /dev/null 2>&1
3125 # arg 1 is dev to add and is output of the below eg.
3126 # ls -l /sys/class/block/sdd | rev | cut -d "/" -f 3 | rev
3131 # arg 1 will be in h:t:d:l format now in the h and "t d l" format
3132 h=`echo ${1} | cut -d":" -f 1`
3133 tdl=`echo ${1} | cut -d":" -f 2-|sed 's/:/ /g'`
3135 echo ${tdl} > /sys/class/scsi_host/host${h}/scan || _fail "Add disk failed"
3137 # ensure the device comes online
3139 for i in `seq 1 10`; do
3140 if [ -d /sys/class/scsi_device/${1}/device/block ]; then
3141 dev=`ls /sys/class/scsi_device/${1}/device/block`
3142 for j in `seq 1 10`;
3144 stat /dev/$dev > /dev/null 2>&1
3145 if [ $? -eq 0 ]; then
3156 if [ $dev_back_oneline -eq 0 ]; then
3157 echo "/dev/$dev online failed" >> $seqres.full
3159 echo "/dev/$dev is back online" >> $seqres.full
3165 if [ -z "$FSTRIM_PROG" ]; then
3166 _notrun "This test requires fstrim utility."
3170 _require_batched_discard()
3172 if [ $# -ne 1 ]; then
3173 echo "Usage: _require_batched_discard mnt_point" 1>&2
3177 $FSTRIM_PROG $1 > /dev/null 2>&1 || _notrun "FITRIM not supported on $1"
3182 if [ -z "$DUMPE2FS_PROG" ]; then
3183 _notrun "This test requires dumpe2fs utility."
3189 if [ ! -e /proc/self/uid_map ]; then
3190 _notrun "This test requires procfs uid_map support."
3192 if [ ! -e /proc/self/gid_map ]; then
3193 _notrun "This test requires procfs gid_map support."
3199 FSSUM_PROG=$here/src/fssum
3200 [ -x $FSSUM_PROG ] || _notrun "fssum not built"
3205 CLONER_PROG=$here/src/cloner
3206 [ -x $CLONER_PROG ] || \
3207 _notrun "cloner binary not present at $CLONER_PROG"
3210 # Normalize mount options from global $MOUNT_OPTIONS
3211 # Convert options like "-o opt1,opt2 -oopt3" to
3213 _normalize_mount_options()
3215 echo $MOUNT_OPTIONS | sed -n 's/-o\s*\(\S*\)/\1/gp'| sed 's/,/ /g'
3218 # skip test if MOUNT_OPTIONS contains the given strings
3219 _exclude_scratch_mount_option()
3221 local mnt_opts=$(_normalize_mount_options)
3223 while [ $# -gt 0 ]; do
3224 if echo $mnt_opts | grep -qw "$1"; then
3225 _notrun "mount option \"$1\" not allowed in this test"
3233 _exclude_scratch_mount_option "noatime"
3234 if [ "$FSTYP" == "nfs" ]; then
3235 _notrun "atime related mount options have no effect on NFS"
3241 _scratch_mkfs > /dev/null 2>&1
3242 _scratch_mount -o relatime || \
3243 _notrun "relatime not supported by the current kernel"
3249 [ -x src/nsexec ] || _notrun "src/nsexec executable not found"
3250 src/nsexec -U true 2>/dev/null || _notrun "userns not supported by this kernel"
3253 _create_loop_device()
3256 dev=`losetup -f --show $file` || _fail "Cannot assign $file to a loop device"
3260 _destroy_loop_device()
3263 losetup -d $dev || _fail "Cannot destroy loop device $dev"
3266 _scale_fsstress_args()
3269 while [ $# -gt 0 ]; do
3271 -n) args="$args $1 $(($2 * $TIME_FACTOR))"; shift ;;
3272 -p) args="$args $1 $(($2 * $LOAD_FACTOR))"; shift ;;
3273 *) args="$args $1" ;;
3281 # Return the logical block size if running on a block device,
3282 # else substitute the page size.
3284 _min_dio_alignment()
3288 if [ -b "$dev" ]; then
3289 blockdev --getss $dev
3291 $here/src/feature -s
3297 echo "# $@" >> $seqres.full 2>&1
3298 "$@" >> $seqres.full 2>&1 || _fail "failed: '$@'"
3301 _run_btrfs_util_prog()
3303 run_check $BTRFS_UTIL_PROG $*
3306 _require_btrfs_send_stream_version()
3308 $BTRFS_UTIL_PROG send 2>&1 | \
3309 grep '^[ \t]*\-\-stream\-version <version>' > /dev/null 2>&1
3310 if [ $? -ne 0 ]; then
3311 _notrun "Missing btrfs-progs send --stream-version command line option, skipped this test"
3314 # test if btrfs kernel supports send stream version 2
3315 if [ ! -f /sys/fs/btrfs/send/stream_version ]; then
3316 _notrun "Missing btrfs kernel patch for send stream version 2, skipped this test"
3320 _require_btrfs_mkfs_feature()
3323 echo "Missing feature name argument for _require_btrfs_mkfs_feature"
3327 $MKFS_BTRFS_PROG -O list-all 2>&1 | \
3328 grep '^[ \t]*'"$feat"'\b' > /dev/null 2>&1
3330 _notrun "Feature $feat not supported in the available version of mkfs.btrfs"
3333 _require_btrfs_fs_feature()
3336 echo "Missing feature name argument for _require_btrfs_fs_feature"
3340 modprobe btrfs > /dev/null 2>&1
3341 [ -e /sys/fs/btrfs/features/$feat ] || \
3342 _notrun "Feature $feat not supported by the available btrfs version"
3345 _require_test_symlinks()
3347 # IRIX UDF does not support symlinks
3348 [ "$HOSTOS" = "IRIX" -a "$FSTYP" = 'udf' ] && \
3349 _notrun "Require symlinks support"
3350 target=`mktemp -p $TEST_DIR`
3351 link=`mktemp -p $TEST_DIR -u`
3352 ln -s `basename $target` $link
3353 if [ "$?" -ne 0 ]; then
3355 _notrun "Require symlinks support"
3360 _require_test_fcntl_advisory_locks()
3362 [ "$FSTYP" != "cifs" ] && return 0
3363 cat /proc/mounts | grep $TEST_DEV | grep cifs | grep -q "nobrl" && return 0
3364 cat /proc/mounts | grep $TEST_DEV | grep cifs | grep -qE "nounix|forcemand" && \
3365 _notrun "Require fcntl advisory locks support"
3368 # XFS ability to change UUIDs on V5/CRC filesystems
3370 _require_meta_uuid()
3372 # This will create a crc fs on $SCRATCH_DEV
3375 _scratch_xfs_db -x -c "uuid restore" 2>&1 \
3376 | grep -q "invalid UUID\|supported on V5 fs" \
3377 && _notrun "Userspace doesn't support meta_uuid feature"
3379 _scratch_xfs_db -x -c "uuid generate" >/dev/null 2>&1
3381 _scratch_mount >/dev/null 2>&1 \
3382 || _notrun "Kernel doesn't support meta_uuid feature"
3386 _require_btrfs_dev_del_by_devid()
3388 $BTRFS_UTIL_PROG device delete --help | egrep devid > /dev/null 2>&1
3389 [ $? -eq 0 ] || _notrun "$BTRFS_UTIL_PROG too old "\
3390 "(must support 'btrfs device delete <devid> /<mnt>')"
3393 _require_test_lsattr()
3395 testio=$(lsattr -d $TEST_DIR 2>&1)
3396 echo $testio | grep -q "Operation not supported" && \
3397 _notrun "lsattr not supported by test filesystem type: $FSTYP"
3398 echo $testio | grep -q "Inappropriate ioctl for device" && \
3399 _notrun "lsattr not supported by test filesystem type: $FSTYP"
3402 _require_xfs_test_rmapbt()
3406 if [ "$(xfs_info "$TEST_DIR" | grep -c "rmapbt=1")" -ne 1 ]; then
3407 _notrun "rmapbt not supported by test filesystem type: $FSTYP"
3411 _require_xfs_scratch_rmapbt()
3415 _scratch_mkfs > /dev/null
3417 if [ "$(xfs_info "$SCRATCH_MNT" | grep -c "rmapbt=1")" -ne 1 ]; then
3419 _notrun "rmapbt not supported by scratch filesystem type: $FSTYP"
3440 "$XFS_IO_PROG" -c "bmap -${param}lpv" "$file" | grep -c "$@"
3447 touch $TEST_DIR/syscalltest
3448 chattr "+$attribute" $TEST_DIR/syscalltest > $TEST_DIR/syscalltest.out 2>&1
3450 chattr "-$attribute" $TEST_DIR/syscalltest > $TEST_DIR/syscalltest.out 2>&1
3451 if [ "$status" -ne 0 ]; then
3452 _notrun "file system doesn't support chattr +$attribute"
3454 cat $TEST_DIR/syscalltest.out >> $seqres.full
3456 rm -f $TEST_DIR/syscalltest.out
3461 if [ -z "$1" ]; then
3462 echo "Usage: _get_total_inode <mnt>"
3466 nr_inode=`$DF_PROG -i $1 | tail -1 | awk '{print $3}'`
3472 if [ -z "$1" ]; then
3473 echo "Usage: _get_used_inode <mnt>"
3477 nr_inode=`$DF_PROG -i $1 | tail -1 | awk '{print $4}'`
3481 _get_used_inode_percent()
3483 if [ -z "$1" ]; then
3484 echo "Usage: _get_used_inode_percent <mnt>"
3488 pct_inode=`$DF_PROG -i $1 | tail -1 | awk '{ print $6 }' | \
3495 if [ -z "$1" ]; then
3496 echo "Usage: _get_free_inode <mnt>"
3500 nr_inode=`$DF_PROG -i $1 | tail -1 | awk '{print $5}'`
3504 # get the available space in bytes
3506 _get_available_space()
3508 if [ -z "$1" ]; then
3509 echo "Usage: _get_available_space <mnt>"
3513 avail_kb=`$DF_PROG $1 | tail -n1 | awk '{ print $5 }'`
3514 echo $((avail_kb * 1024))
3517 # get btrfs profile configs being tested
3519 # A set of pre-set profile configs are exported via _btrfs_profile_configs
3520 # array. Default configs can be overridden by setting BTRFS_PROFILE_CONFIGS
3521 # var in the format "metadata_profile:data_profile", multiple configs can be
3522 # seperated by space, e.g.
3523 # export BTRFS_PROFILE_CONFIGS="raid0:raid0 raid1:raid1 dup:single"
3524 _btrfs_get_profile_configs()
3526 if [ "$FSTYP" != "btrfs" ]; then
3530 if [ -z "$BTRFS_PROFILE_CONFIGS" ]; then
3531 # Default configurations to test.
3543 # User-provided configurations.
3544 local configs=(${BTRFS_PROFILE_CONFIGS[@]})
3547 _btrfs_profile_configs=()
3548 for cfg in "${configs[@]}"; do
3549 local supported=true
3550 local profiles=(${cfg/:/ })
3551 if [ "$1" == "replace" ]; then
3552 # We can't do replace with these profiles because they
3553 # imply only one device ($SCRATCH_DEV), and we need to
3554 # keep $SCRATCH_DEV around for _scratch_mount
3555 # and _check_scratch_fs.
3559 elif [ "$1" == "replace-missing" ]; then
3560 # We can't replace missing devices with these profiles
3561 # because there isn't enough redundancy.
3568 local unsupported=()
3570 for unsupp in "${unsupported[@]}"; do
3571 if [ "${profiles[0]}" == "$unsupp" -o "${profiles[1]}" == "$unsupp" ]; then
3572 if [ -z "$BTRFS_PROFILE_CONFIGS" ]; then
3573 # For the default config, just omit it.
3576 # For user-provided config, don't run the test.
3577 _notrun "Profile $unsupp not supported for $1"
3581 if "$supported"; then
3582 _btrfs_profile_configs+=("-m ${profiles[0]} -d ${profiles[1]}")
3585 export _btrfs_profile_configs
3588 # stress btrfs by running balance operation in a loop
3589 _btrfs_stress_balance()
3593 $BTRFS_UTIL_PROG balance start $options
3597 # stress btrfs by creating/mounting/umounting/deleting subvolume in a loop
3598 _btrfs_stress_subvolume()
3602 local subvol_name=$3
3606 mkdir -p $subvol_mnt
3607 while [ ! -e $stop_file ]; do
3608 $BTRFS_UTIL_PROG subvolume create $btrfs_mnt/$subvol_name
3609 $MOUNT_PROG -o subvol=$subvol_name $btrfs_dev $subvol_mnt
3610 $UMOUNT_PROG $subvol_mnt
3611 $BTRFS_UTIL_PROG subvolume delete $btrfs_mnt/$subvol_name
3615 # stress btrfs by running scrub in a loop
3616 _btrfs_stress_scrub()
3620 $BTRFS_UTIL_PROG scrub start -B $btrfs_mnt
3624 # stress btrfs by defragmenting every file/dir in a loop and compress file
3625 # contents while defragmenting if second argument is not "nocompress"
3626 _btrfs_stress_defrag()
3632 if [ "$compress" == "nocompress" ]; then
3633 find $btrfs_mnt \( -type f -o -type d \) -exec \
3634 $BTRFS_UTIL_PROG filesystem defrag {} \;
3636 find $btrfs_mnt \( -type f -o -type d \) -exec \
3637 $BTRFS_UTIL_PROG filesystem defrag -clzo {} \;
3638 find $btrfs_mnt \( -type f -o -type d \) -exec \
3639 $BTRFS_UTIL_PROG filesystem defrag -czlib {} \;
3644 # stress btrfs by remounting it with different compression algorithms in a loop
3645 # run this with fsstress running at background could exercise the compression
3646 # code path and ensure no race when switching compression algorithm with constant
3648 _btrfs_stress_remount_compress()
3652 for algo in no zlib lzo; do
3653 $MOUNT_PROG -o remount,compress=$algo $btrfs_mnt
3658 # stress btrfs by replacing devices in a loop
3659 # Note that at least 3 devices are needed in SCRATCH_DEV_POOL and the last
3660 # device should be free(not used by btrfs)
3661 _btrfs_stress_replace()
3665 # The device number in SCRATCH_DEV_POOL should be at least 3,
3666 # one is SCRATCH_DEV, one is to be replaced, one is free device
3667 # we won't replace SCRATCH_DEV, see below for reason
3668 if [ "`echo $SCRATCH_DEV_POOL | wc -w`" -lt 3 ]; then
3669 echo "_btrfs_stress_replace requires at least 3 devices in SCRATCH_DEV_POOL"
3673 # take the last device as the first free_dev
3674 local free_dev="`echo $SCRATCH_DEV_POOL | $AWK_PROG '{print $NF}'`"
3676 # free_dev should be really free
3677 if $BTRFS_UTIL_PROG filesystem show $btrfs_mnt | grep -q "$free_dev"; then
3678 echo "_btrfs_stress_replace: $free_dev is used by btrfs"
3682 # dev_pool is device list being currently used by btrfs (excluding SCRATCH_DEV)
3683 # and can be replaced. We don't replace SCRATCH_DEV because it will be used in
3684 # _scratch_mount and _check_scratch_fs etc.
3685 local dev_pool=`echo $SCRATCH_DEV_POOL | sed -e "s# *$SCRATCH_DEV *##" \
3686 -e "s# *$free_dev *##"`
3688 # set the first device in dev_pool as the first src_dev to be replaced
3689 local src_dev=`echo $dev_pool | $AWK_PROG '{print $1}'`
3691 echo "dev_pool=$dev_pool"
3692 echo "free_dev=$free_dev, src_dev=$src_dev"
3694 echo "Replacing $src_dev with $free_dev"
3695 $BTRFS_UTIL_PROG replace start -fB $src_dev $free_dev $btrfs_mnt
3696 if [ $? -ne 0 ]; then
3697 # don't update src_dev and free_dev if replace failed
3700 dev_pool="$dev_pool $free_dev"
3701 dev_pool=`echo $dev_pool | sed -e "s# *$src_dev *##"`
3703 src_dev=`echo $dev_pool | $AWK_PROG '{print $1}'`
3707 # find the right option to force output in bytes, older versions of btrfs-progs
3708 # print that by default, newer print human readable numbers with unit suffix
3709 _btrfs_qgroup_units()
3711 $BTRFS_UTIL_PROG qgroup show --help 2>&1 | grep -q -- --raw && echo "--raw"
3714 # return device size in kb
3717 grep `_short_dev $1` /proc/partitions | awk '{print $3}'
3720 # check dmesg log for WARNING/Oops/etc.
3723 if [ ! -f ${RESULT_DIR}/check_dmesg ]; then
3726 rm -f ${RESULT_DIR}/check_dmesg
3728 # default filter is a simple cat command, caller could provide a
3729 # customized filter and pass the name through the first argument, to
3730 # filter out intentional WARNINGs or Oopses
3733 # search the dmesg log of last run of $seqnum for possible failures
3734 # use sed \cregexpc address type, since $seqnum contains "/"
3735 dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | \
3736 tac | $filter >$seqres.dmesg
3737 grep -q -e "kernel BUG at" \
3741 -e "possible recursive locking detected" \
3742 -e "Internal error" \
3743 -e "INFO: suspicious RCU usage" \
3744 -e "INFO: possible circular locking dependency detected" \
3745 -e "general protection fault:" \
3747 if [ $? -eq 0 ]; then
3748 echo "_check_dmesg: something found in dmesg (see $seqres.dmesg)"
3756 # don't check dmesg log after test
3757 _disable_dmesg_check()
3759 rm -f ${RESULT_DIR}/check_dmesg
3764 if [ "$iam" == new ]
3768 # make some further configuration checks here
3769 if [ "$TEST_DEV" = "" ]
3771 echo "common/rc: Error: \$TEST_DEV is not set"
3775 # if $TEST_DEV is not mounted, mount it now as XFS
3776 if [ -z "`_fs_type $TEST_DEV`" ]
3778 # $TEST_DEV is not mounted
3781 echo "common/rc: retrying test device mount with external set"
3782 [ "$USE_EXTERNAL" != "yes" ] && export USE_EXTERNAL=yes
3785 echo "common/rc: could not mount $TEST_DEV on $TEST_DIR"
3791 if [ "`_fs_type $TEST_DEV`" != "$FSTYP" ]
3793 echo "common/rc: Error: \$TEST_DEV ($TEST_DEV) is not a MOUNTED $FSTYP filesystem"
3794 # raw $DF_PROG cannot handle NFS/CIFS/overlay correctly
3795 _df_device $TEST_DEV
3798 # Figure out if we need to add -F ("foreign", deprecated) option to xfs_io
3799 xfs_io -c stat $TEST_DIR 2>&1 | grep -q "is not on an XFS filesystem" && \
3800 export XFS_IO_PROG="$XFS_IO_PROG -F"
3802 # xfs_copy doesn't work on v5 xfs yet without -d option
3803 if [ "$FSTYP" == "xfs" ] && [[ $MKFS_OPTIONS =~ crc=1 ]]; then
3804 export XFS_COPY_PROG="$XFS_COPY_PROG -d"
3808 # get real device path name by following link
3812 if [ -b "$_dev" ] && [ -L "$_dev" ]; then
3813 _dev=`readlink -f "$_dev"`
3818 # basename of a device
3821 echo `basename $(_real_dev $1)`
3826 local _dev=`_real_dev $1`
3827 local _maj=$(stat -c%t $_dev | tr [:lower:] [:upper:])
3828 local _min=$(stat -c%T $_dev | tr [:lower:] [:upper:])
3829 _maj=$(echo "ibase=16; $_maj" | bc)
3830 _min=$(echo "ibase=16; $_min" | bc)
3831 echo /sys/dev/block/$_maj:$_min
3836 if [ -z $1 ] || [ ! -d $1 ]; then
3837 echo "Missing mount point argument for get_block_size"
3840 echo `stat -f -c %S $1`
3845 echo $(getconf PAGE_SIZE)
3852 args=`echo $@ | sed -e "s/ BSIZE / $bsize /g" -e "s/ PSIZE / $psize /g"`
3853 set -- $here/ltp/fsx $args $FSX_AVOID $TEST_DIR/junk
3854 echo "$@" >>$seqres.full
3855 rm -f $TEST_DIR/junk
3856 "$@" 2>&1 | tee -a $seqres.full >$tmp.fsx
3857 if [ ${PIPESTATUS[0]} -ne 0 ]; then
3863 # Test for the existence of a sysfs entry at /sys/fs/$FSTYP/DEV/$ATTR
3865 # Only one argument is needed:
3866 # - attr: path name under /sys/fs/$FSTYP/DEV
3869 # _require_fs_sysfs error/fail_at_unmount
3873 local dname=$(_short_dev $TEST_DEV)
3875 if [ -z "$attr" -o -z "$dname" ];then
3876 _fail "Usage: _require_fs_sysfs <sysfs_attr_path>"
3879 if [ ! -e /sys/fs/${FSTYP}/${dname}/${attr} ];then
3880 _notrun "This test requires /sys/fs/${FSTYP}/${dname}/${attr}"
3884 # Write "content" into /sys/fs/$FSTYP/$DEV/$ATTR
3886 # All arguments are necessary, and in this order:
3887 # - dev: device name, e.g. $SCRATCH_DEV
3888 # - attr: path name under /sys/fs/$FSTYP/$dev
3889 # - content: the content of $attr
3892 # _set_fs_sysfs_attr /dev/mapper/scratch-dev error/fail_at_unmount 0
3893 _set_fs_sysfs_attr()
3901 if [ ! -b "$dev" -o -z "$attr" -o -z "$content" ];then
3902 _fail "Usage: _set_fs_sysfs_attr <mounted_device> <attr> <content>"
3905 local dname=$(_short_dev $dev)
3906 echo "$content" > /sys/fs/${FSTYP}/${dname}/${attr}
3909 # Print the content of /sys/fs/$FSTYP/$DEV/$ATTR
3911 # All arguments are necessary, and in this order:
3912 # - dev: device name, e.g. $SCRATCH_DEV
3913 # - attr: path name under /sys/fs/$FSTYP/$dev
3916 # _get_fs_sysfs_attr /dev/mapper/scratch-dev error/fail_at_unmount
3917 _get_fs_sysfs_attr()
3922 if [ ! -b "$dev" -o -z "$attr" ];then
3923 _fail "Usage: _get_fs_sysfs_attr <mounted_device> <attr>"
3926 local dname=$(_short_dev $dev)
3927 cat /sys/fs/${FSTYP}/${dname}/${attr}
3931 # Reset all xfs error handling attributes, set them to original
3934 # Only one argument, and it's mandatory:
3935 # - dev: device name, e.g. $SCRATCH_DEV
3937 # Note: this function only works for XFS
3938 _reset_xfs_sysfs_error_handling()
3942 if [ ! -b "$dev" -o "$FSTYP" != "xfs" ];then
3943 _fail "Usage: reset_xfs_sysfs_error_handling <device>"
3946 _set_fs_sysfs_attr $dev error/fail_at_unmount 1
3947 echo -n "error/fail_at_unmount="
3948 _get_fs_sysfs_attr $dev error/fail_at_unmount
3950 # Make sure all will be configured to retry forever by default, except
3951 # for ENODEV, which is an unrecoverable error, so it will be configured
3952 # to not retry on error by default.
3953 for e in default EIO ENOSPC; do
3954 _set_fs_sysfs_attr $dev \
3955 error/metadata/${e}/max_retries -1
3956 echo -n "error/metadata/${e}/max_retries="
3957 _get_fs_sysfs_attr $dev error/metadata/${e}/max_retries
3959 _set_fs_sysfs_attr $dev \
3960 error/metadata/${e}/retry_timeout_seconds 0
3961 echo -n "error/metadata/${e}/retry_timeout_seconds="
3962 _get_fs_sysfs_attr $dev \
3963 error/metadata/${e}/retry_timeout_seconds
3967 # Skip if we are running an older binary without the stricter input checks.
3968 # Make multiple checks to be sure that there is no regression on the one
3969 # selected feature check, which would skew the result.
3971 # At first, make a common function that runs the tests and returns
3972 # number of failed cases.
3973 _xfs_mkfs_validation_check()
3975 local tmpfile=`mktemp`
3976 local cmd="$MKFS_XFS_PROG -f -N -d file,name=$tmpfile,size=1g"
3978 $cmd -s size=2s >/dev/null 2>&1
3981 $cmd -l version=2,su=260k >/dev/null 2>&1
3982 sum=`expr $sum + $?`
3988 # Skip the test if all calls passed - mkfs accepts invalid input
3989 _require_xfs_mkfs_validation()
3991 _xfs_mkfs_validation_check
3992 if [ "$?" -eq 0 ]; then
3993 _notrun "Requires newer mkfs with stricter input checks: the oldest supported version of xfsprogs is 4.7."
3997 # The oposite of _require_xfs_mkfs_validation.
3998 _require_xfs_mkfs_without_validation()
4000 _xfs_mkfs_validation_check
4001 if [ "$?" -ne 0 ]; then
4002 _notrun "Requires older mkfs without strict input checks: the last supported version of xfsprogs is 4.5."
4008 ################################################################################
4009 # make sure this script returns success