2 # SPDX-License-Identifier: GPL-2.0+
3 # Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved.
7 BC=$(which bc 2> /dev/null) || BC=
12 _notrun "this test requires 'bc' tool for doing math operations"
18 [ $# -le 0 ] && return
19 LANG=C echo "scale=0; $@" | "$BC" -q 2> /dev/null
24 command dd --help 2>&1 | grep noxfer >/dev/null
27 command dd status=noxfer $@
33 # Prints the md5 checksum of a given file
36 md5sum $1 | cut -d ' ' -f1
39 # Write a byte into a range of a file
45 local xfs_io_args="$5"
47 $XFS_IO_PROG $xfs_io_args -f -c "pwrite -S $pattern $offset $len" "$file"
50 # mmap-write a byte into a range of a file
58 $XFS_IO_PROG -f -c "mmap -rw 0 $mmap_len" -c "mwrite -S $pattern $offset $len" "$file"
61 # ls -l w/ selinux sometimes puts a dot at the end:
62 # -rwxrw-r--. id1 id2 file1
63 # Also filter out lost+found directory on extN file system if present
67 ls -l $* | sed "s/\(^[-rwxdlbcpsStT]*\)\. /\1 /" | grep -v 'lost+found'
91 echo "$_err_msg" | tee -a $seqres.full
92 echo "(see $seqres.full for details)"
95 # make sure we have a standard umask
98 # check for correct setup and source the $FSTYP specific functions now
101 [ "$XFS_LOGPRINT_PROG" = "" ] && _fatal "xfs_logprint not found"
102 [ "$XFS_REPAIR_PROG" = "" ] && _fatal "xfs_repair not found"
103 [ "$XFS_DB_PROG" = "" ] && _fatal "xfs_db not found"
104 [ "$MKFS_XFS_PROG" = "" ] && _fatal "mkfs_xfs not found"
105 [ "$XFS_INFO_PROG" = "" ] && _fatal "xfs_info not found"
110 [ "$MKFS_UDF_PROG" = "" ] && _fatal "mkfs_udf/mkudffs not found"
113 [ "$MKFS_BTRFS_PROG" = "" ] && _fatal "mkfs.btrfs not found"
118 [ "$MKFS_EXT4_PROG" = "" ] && _fatal "mkfs.ext4 not found"
121 [ "$MKFS_F2FS_PROG" = "" ] && _fatal "mkfs.f2fs not found"
139 [ "$MKFS_REISER4_PROG" = "" ] && _fatal "mkfs.reiser4 not found"
144 [ "$UBIUPDATEVOL_PROG" = "" ] && _fatal "ubiupdatevol not found"
148 if [ ! -z "$REPORT_LIST" ]; then
158 # Get hugepagesize in bytes
161 local hugepgsz=$(awk '/Hugepagesize/ {print $2}' /proc/meminfo)
162 # Call _notrun if $hugepgsz is not a number
163 echo "$hugepgsz" | egrep -q ^[0-9]+$ || \
164 _notrun "Cannot get the value of Hugepagesize"
165 echo $((hugepgsz * 1024))
170 $MOUNT_PROG `_mount_ops_filter $*`
173 # Call _mount to do mount operation but also save mountpoint to
174 # MOUNTED_POINT_STACK. Note that the mount point must be the last parameter
177 local mnt_point=${!#}
178 local mnt_dev=${@:(-2):1}
179 local scratch_opts=""
180 if [ "$mnt_dev" = "$SCRATCH_DEV" ]; then
181 _scratch_options mount
182 scratch_opts="$SCRATCH_OPTIONS"
185 _mount $scratch_opts $*
186 if [ $? -eq 0 ]; then
187 # mount --move operation updates the mountpoint, so remove
188 # the old one and insert the new one
189 if [[ "$*" =~ --move|-M ]]; then
190 MOUNTED_POINT_STACK=`echo $MOUNTED_POINT_STACK | \
193 MOUNTED_POINT_STACK="$mnt_point $MOUNTED_POINT_STACK"
199 # Unmount the last mounted mountpoint in MOUNTED_POINT_STACK
200 # and return it to caller
203 local last_mnt=`echo $MOUNTED_POINT_STACK | awk '{print $1}'`
205 if [ -n "$last_mnt" ]; then
206 $UMOUNT_PROG $last_mnt
208 MOUNTED_POINT_STACK=`echo $MOUNTED_POINT_STACK | cut -d\ -f2-`
211 # Unmount all mountpoints in MOUNTED_POINT_STACK and clear the stack
214 if [ -n "$MOUNTED_POINT_STACK" ]; then
215 $UMOUNT_PROG $MOUNTED_POINT_STACK
217 MOUNTED_POINT_STACK=""
227 if [ "$FSTYP" != "xfs" ]; then
233 SCRATCH_OPTIONS="$SCRATCH_OPTIONS -f"
242 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_RTDEV" ] && \
243 SCRATCH_OPTIONS="$SCRATCH_OPTIONS ${rt_opt}rtdev=$SCRATCH_RTDEV"
244 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
245 SCRATCH_OPTIONS="$SCRATCH_OPTIONS ${log_opt}logdev=$SCRATCH_LOGDEV"
255 if [ "$FSTYP" != "xfs" ]; then
269 [ "$USE_EXTERNAL" = yes -a ! -z "$TEST_RTDEV" ] && \
270 TEST_OPTIONS="$TEST_OPTIONS ${rt_opt}rtdev=$TEST_RTDEV"
271 [ "$USE_EXTERNAL" = yes -a ! -z "$TEST_LOGDEV" ] && \
272 TEST_OPTIONS="$TEST_OPTIONS ${log_opt}logdev=$TEST_LOGDEV"
278 local last_index=$(( $# - 1 ))
280 [ $last_index -gt 0 ] && shift $last_index
284 $PERL_PROG -ne "s#mtpt=[^,|^\n|^\s]*#mtpt=$fs_escaped\1\2#; print;"
288 # Used for mounting non-scratch devices (e.g. loop, dm constructs)
289 # with the safe set of scratch mount options (e.g. loop image may be
290 # hosted on $SCRATCH_DEV, so can't use external scratch devices).
291 _common_dev_mount_options()
293 echo $MOUNT_OPTIONS $SELINUX_MOUNT_OPTIONS $*
296 _scratch_mount_options()
298 _scratch_options mount
300 echo `_common_dev_mount_options $*` $SCRATCH_OPTIONS \
301 $SCRATCH_DEV $SCRATCH_MNT
308 local fstyp=`$DF_PROG $dir | tail -1 | $AWK_PROG '{print $2}'`
311 $XFS_INFO_PROG $dir | grep -q "ftype=1"
314 local dev=`$DF_PROG $dir | tail -1 | $AWK_PROG '{print $1}'`
315 tune2fs -l $dev | grep -q filetype
318 local testfile=$dir/$$.ftype
320 # look for DT_UNKNOWN files
321 local unknowns=$($here/src/t_dir_type $dir u | wc -l)
323 # 0 unknowns is success
329 # mount scratch device with given options but don't check mount status
332 if [ "$FSTYP" == "overlay" ]; then
333 _overlay_scratch_mount $*
336 _mount -t $FSTYP `_scratch_mount_options $*`
339 # mount scratch device with given options and _fail if mount fails
342 _try_scratch_mount $* || _fail "mount failed"
345 _scratch_mount_idmapped()
350 if [ "$type" = "u" ]; then
351 # This means root will be able to create files as uid %id in
352 # the underlying filesystem by going through the idmapped mount.
353 $here/src/idmapped-mounts/mount-idmapped --map-mount u:0:$id:1 \
354 --map-mount u:$id:0:1 \
355 --map-mount g:0:0:1 \
356 "$SCRATCH_MNT" "$SCRATCH_MNT" || _fail "mount-idmapped failed"
357 elif [ "$type" = "g" ]; then
358 # This means root will be able to create files as gid %id in
359 # the underlying filesystem by going through the idmapped mount.
360 $here/src/idmapped-mounts/mount-idmapped --map-mount g:0:$id:1 \
361 --map-mount g:$id:0:1 \
362 --map-mount u:0:0:1 \
363 "$SCRATCH_MNT" "$SCRATCH_MNT" || _fail "mount-idmapped failed"
364 elif [ "$type" = "b" ]; then
365 # This means root will be able to create files as uid and gid
366 # %id in the underlying filesystem by going through the idmapped mount.
367 $here/src/idmapped-mounts/mount-idmapped --map-mount b:0:$id:1 \
368 --map-mount b:$id:0:1 \
369 "$SCRATCH_MNT" "$SCRATCH_MNT" || _fail "mount-idmapped failed"
371 _fail "usage: either \"u\" (uid), \"g\" (gid), or \"b\" (uid and gid) must be specified "
379 _overlay_scratch_unmount
382 $UMOUNT_PROG $SCRATCH_MNT
385 $UMOUNT_PROG $SCRATCH_DEV
390 _scratch_umount_idmapped()
392 $UMOUNT_PROG $SCRATCH_MNT
399 if test -n "$opts"; then
400 _try_scratch_mount "-o remount,$opts"
404 _scratch_cycle_mount()
408 if [ "$FSTYP" = tmpfs ]; then
409 _scratch_remount "$opts"
412 if test -n "$opts"; then
416 _try_scratch_mount "$opts" || _fail "cycle mount failed"
421 if [ $FSTYP = "overlay" ]; then
422 # In lagacy overlay usage, it may specify directory as
423 # SCRATCH_DEV, in this case OVL_BASE_SCRATCH_DEV
424 # will be null, so check OVL_BASE_SCRATCH_DEV before
425 # running shutdown to avoid shutting down base fs accidently.
426 if [ -z $OVL_BASE_SCRATCH_DEV ]; then
427 _fail "_scratch_shutdown: call _require_scratch_shutdown first in test"
429 $here/src/godown $* $OVL_BASE_SCRATCH_MNT
432 $here/src/godown $* $SCRATCH_MNT
436 # Return a file path that can be used to shut down the scratch filesystem.
437 # Caller should _require_scratch_shutdown before using this.
438 _scratch_shutdown_handle()
440 if [ $FSTYP = "overlay" ]; then
441 echo $OVL_BASE_SCRATCH_MNT
449 if [ "$FSTYP" == "overlay" ]; then
450 _overlay_test_mount $*
454 _mount -t $FSTYP $TEST_OPTIONS $TEST_FS_MOUNT_OPTS $SELINUX_MOUNT_OPTIONS $* $TEST_DEV $TEST_DIR
459 if [ "$FSTYP" == "overlay" ]; then
460 _overlay_test_unmount
462 $UMOUNT_PROG $TEST_DEV
468 if [ "$FSTYP" = tmpfs ]; then
475 _scratch_mkfs_options()
477 _scratch_options mkfs
478 echo $SCRATCH_OPTIONS $MKFS_OPTIONS $* $SCRATCH_DEV
481 # Do the actual mkfs work on SCRATCH_DEV. Firstly mkfs with both MKFS_OPTIONS
482 # and user specified mkfs options, if that fails (due to conflicts between mkfs
483 # options), do a second mkfs with only user provided mkfs options.
485 # First param is the mkfs command without any mkfs options and device.
486 # Second param is the filter to remove unnecessary messages from mkfs stderr.
487 # Other extra mkfs options are followed.
493 local extra_mkfs_options=$*
495 local tmp=`mktemp -u`
497 # save mkfs output in case conflict means we need to run again.
498 # only the output for the mkfs that applies should be shown
499 eval "$mkfs_cmd $MKFS_OPTIONS $extra_mkfs_options $SCRATCH_DEV" \
500 2>$tmp.mkfserr 1>$tmp.mkfsstd
503 # a mkfs failure may be caused by conflicts between $MKFS_OPTIONS and
504 # $extra_mkfs_options
505 if [ $mkfs_status -ne 0 -a -n "$extra_mkfs_options" ]; then
507 echo -n "** mkfs failed with extra mkfs options "
508 echo "added to \"$MKFS_OPTIONS\" by test $seq **"
509 echo -n "** attempting to mkfs using only test $seq "
510 echo "options: $extra_mkfs_options **"
513 # running mkfs again. overwrite previous mkfs output files
514 eval "$mkfs_cmd $extra_mkfs_options $SCRATCH_DEV" \
515 2>$tmp.mkfserr 1>$tmp.mkfsstd
519 # output stored mkfs output, filtering unnecessary output from stderr
521 eval "cat $tmp.mkfserr | $mkfs_filter" >&2
523 rm -f $tmp.mkfserr $tmp.mkfsstd
527 _setup_large_ext4_fs()
532 [ "$LARGE_SCRATCH_DEV" != yes ] && return 0
533 [ -z "$SCRATCH_DEV_EMPTY_SPACE" ] && SCRATCH_DEV_EMPTY_SPACE=0
534 [ $SCRATCH_DEV_EMPTY_SPACE -ge $fs_size ] && return 0
536 # Default free space in the FS is 50GB, but you can specify more via
537 # SCRATCH_DEV_EMPTY_SPACE
538 local space_to_consume=$(($fs_size - 50*1024*1024*1024 - $SCRATCH_DEV_EMPTY_SPACE))
540 # mount the filesystem and create 16TB - 4KB files until we consume
541 # all the necessary space.
542 _try_scratch_mount 2>&1 >$tmp_dir/mnt.err
544 if [ $status -ne 0 ]; then
546 cat $tmp_dir/mnt.err >&2
547 rm -f $tmp_dir/mnt.err
550 rm -f $tmp_dir/mnt.err
552 local file_size=$((16*1024*1024*1024*1024 - 4096))
554 while [ $space_to_consume -gt $file_size ]; do
557 -c "truncate $file_size" \
558 -c "falloc -k 0 $file_size" \
559 $SCRATCH_MNT/.use_space.$nfiles 2>&1
561 if [ $status -ne 0 ]; then
565 space_to_consume=$(( $space_to_consume - $file_size ))
566 nfiles=$(($nfiles + 1))
569 # consume the remaining space.
570 if [ $space_to_consume -gt 0 ]; then
572 -c "truncate $space_to_consume" \
573 -c "falloc -k 0 $space_to_consume" \
574 $SCRATCH_MNT/.use_space.$nfiles 2>&1
577 export NUM_SPACE_FILES=$nfiles
580 if [ $status -ne 0 ]; then
581 echo "large file prealloc failed"
582 cat $tmp_dir/mnt.err >&2
590 local mkfs_cmd="$MKFS_EXT4_PROG -F"
591 local mkfs_filter="grep -v -e ^Warning: -e \"^mke2fs \" | grep -v \"^$\""
592 local tmp=`mktemp -u`
595 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
596 $mkfs_cmd -O journal_dev $MKFS_OPTIONS $SCRATCH_LOGDEV && \
597 mkfs_cmd="$mkfs_cmd -J device=$SCRATCH_LOGDEV"
599 _scratch_do_mkfs "$mkfs_cmd" "$mkfs_filter" $* 2>$tmp.mkfserr 1>$tmp.mkfsstd
602 if [ $mkfs_status -eq 0 -a "$LARGE_SCRATCH_DEV" = yes ]; then
603 # manually parse the mkfs output to get the fs size in bytes
604 local fs_size=`cat $tmp.mkfsstd | awk ' \
605 /^Block size/ { split($2, a, "="); bs = a[2] ; } \
606 / inodes, / { blks = $3 } \
607 /reserved for the super user/ { resv = $1 } \
608 END { fssize = bs * blks - resv; print fssize }'`
610 _setup_large_ext4_fs $fs_size
614 # output mkfs stdout and stderr
617 rm -f $tmp.mkfserr $tmp.mkfsstd
626 local compressopt="$3"
628 test -n "$E2IMAGE_PROG" || _fail "e2image not installed"
629 $E2IMAGE_PROG -Q "$device" "$dumpfile"
630 [ "$compressopt" = "compress" ] && [ -n "$DUMP_COMPRESSOR" ] &&
631 $DUMP_COMPRESSOR "$dumpfile" &>> "$seqres.full"
641 # do nothing for cifs
647 # do nothing for virtiofs
650 # do nothing for ceph
653 # do nothing for glusterfs
656 # do nothing for overlay
659 # do nothing for pvfs2
662 $MKFS_UDF_PROG $MKFS_OPTIONS $* $TEST_DEV > /dev/null
665 $MKFS_BTRFS_PROG $MKFS_OPTIONS $* $TEST_DEV > /dev/null
668 $MKFS_PROG -t $FSTYP -- -F $MKFS_OPTIONS $* $TEST_DEV
671 yes | $MKFS_PROG -t $FSTYP -- $MKFS_OPTIONS $* $TEST_DEV
678 local tmp=`mktemp -u`
687 # do nothing for virtiofs
690 # do nothing for overlay
693 # do nothing for pvfs2
696 $MKFS_UDF_PROG $MKFS_OPTIONS $* 2>$tmp.mkfserr 1>$tmp.mkfsstd
699 $MKFS_BTRFS_PROG $MKFS_OPTIONS $* 2>$tmp.mkfserr 1>$tmp.mkfsstd
702 $MKFS_PROG -t $FSTYP -- -F $MKFS_OPTIONS $* \
703 2>$tmp.mkfserr 1>$tmp.mkfsstd
706 $MKFS_PROG -t $FSTYP -- -f $MKFS_OPTIONS $* \
707 2>$tmp.mkfserr 1>$tmp.mkfsstd
710 yes | $MKFS_PROG -t $FSTYP -- $MKFS_OPTIONS $* \
711 2>$tmp.mkfserr 1>$tmp.mkfsstd
715 if [ $? -ne 0 ]; then
716 # output stored mkfs output
722 rm -f $tmp.mkfserr $tmp.mkfsstd
725 # remove all files in $SCRATCH_MNT, useful when testing on NFS/CIFS
726 _scratch_cleanup_files()
730 # Avoid rm -rf /* if we messed up
731 [ -n "$OVL_BASE_SCRATCH_MNT" ] || return 1
732 _overlay_base_scratch_mount || return 1
733 rm -rf $OVL_BASE_SCRATCH_MNT/* || return 1
734 _overlay_mkdirs $OVL_BASE_SCRATCH_MNT
735 # leave base fs mouted so tests can setup lower/upper dir files
738 [ -n "$SCRATCH_MNT" ] || return 1
740 rm -rf $SCRATCH_MNT/*
753 nfs*|cifs|ceph|overlay|glusterfs|pvfs2|9p|virtiofs)
754 # unable to re-create this fstyp, just remove all files in
755 # $SCRATCH_MNT to avoid EEXIST caused by the leftover files
756 # created in previous runs
757 _scratch_cleanup_files
761 # do nothing for tmpfs
765 # erase the UBI volume; reformated automatically on next mount
766 $UBIUPDATEVOL_PROG ${SCRATCH_DEV} -t
770 _scratch_mkfs_ext4 $*
778 mkfs_cmd="$MKFS_UDF_PROG"
782 mkfs_cmd="$MKFS_BTRFS_PROG"
786 mkfs_cmd="$MKFS_PROG -t $FSTYP -- -F"
787 mkfs_filter="grep -v -e ^Warning: -e \"^mke2fs \""
789 # put journal on separate device?
790 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
791 $mkfs_cmd -O journal_dev $MKFS_OPTIONS $SCRATCH_LOGDEV && \
792 mkfs_cmd="$mkfs_cmd -J device=$SCRATCH_LOGDEV"
795 mkfs_cmd="$MKFS_PROG -t $FSTYP -- -F"
796 mkfs_filter="grep -v -e ^Warning: -e \"^mke2fs \""
799 mkfs_cmd="$MKFS_F2FS_PROG"
803 mkfs_cmd="yes | $MKFS_PROG -t $FSTYP --"
804 mkfs_filter="grep -v -e ^mkfs\.ocfs2"
807 mkfs_cmd="yes | $MKFS_PROG -t $FSTYP --"
812 _scratch_do_mkfs "$mkfs_cmd" "$mkfs_filter" $*
816 # Helper function to get a spare or replace-target device from
817 # configured SCRATCH_DEV_POLL, must call _scratch_dev_pool_get()
818 # before _spare_dev_get(). Replace-target-device/Spare-device will
819 # be assigned to SPARE_DEV.
820 # As of now only one replace-target-device/spare-device can be
824 # _scratch_dev_pool_get() <ndevs>
828 # _scratch_dev_pool_put()
832 typeset -p SCRATCH_DEV_POOL_SAVED >/dev/null 2>&1
833 if [ $? -ne 0 ]; then
834 _fail "Bug: unset val, must call _scratch_dev_pool_get before _spare_dev_get"
837 if [ -z "$SCRATCH_DEV_POOL_SAVED" ]; then
838 _fail "Bug: str empty, must call _scratch_dev_pool_get before _spare_dev_get"
841 # Check if the spare is already assigned
842 typeset -p SPARE_DEV >/dev/null 2>&1
843 if [ $? -eq 0 ]; then
844 if [ ! -z "$SPARE_DEV" ]; then
845 _fail "Bug: SPARE_DEV = $SPARE_DEV already assigned"
849 local ndevs=`echo $SCRATCH_DEV_POOL| wc -w`
850 local config_ndevs=`echo $SCRATCH_DEV_POOL_SAVED| wc -w`
852 if [ $ndevs -eq $config_ndevs ]; then
853 _notrun "All devs used no spare"
855 # Get a dev that is not used
856 local -a devs="( $SCRATCH_DEV_POOL_SAVED )"
857 SPARE_DEV=${devs[@]:$ndevs:1}
863 typeset -p SPARE_DEV >/dev/null 2>&1
864 if [ $? -ne 0 ]; then
865 _fail "Bug: unset val, must call _spare_dev_get before its put"
868 if [ -z "$SPARE_DEV" ]; then
869 _fail "Bug: str empty, must call _spare_dev_get before its put"
876 # Generally test cases will have..
877 # _require_scratch_dev_pool X
878 # to make sure it has the enough scratch devices including
879 # replace-target and spare device. Now arg1 here is the
880 # required number of scratch devices by a-test-case excluding
881 # the replace-target and spare device. So this function will
882 # set SCRATCH_DEV_POOL to the specified number of devices.
885 # _scratch_dev_pool_get() <ndevs>
888 # _scratch_dev_pool_put()
890 _scratch_dev_pool_get()
892 if [ $# -ne 1 ]; then
893 _fail "Usage: _scratch_dev_pool_get ndevs"
897 local config_ndevs=`echo $SCRATCH_DEV_POOL| wc -w`
898 local -a devs="( $SCRATCH_DEV_POOL )"
900 typeset -p config_ndevs >/dev/null 2>&1
901 if [ $? -ne 0 ]; then
902 _fail "Bug: cant find SCRATCH_DEV_POOL ndevs"
905 if [ $config_ndevs -lt $test_ndevs ]; then
906 _notrun "Need at least test requested number of ndevs $test_ndevs"
909 SCRATCH_DEV_POOL_SAVED=${SCRATCH_DEV_POOL}
910 export SCRATCH_DEV_POOL_SAVED
911 SCRATCH_DEV_POOL=${devs[@]:0:$test_ndevs}
912 export SCRATCH_DEV_POOL
915 _scratch_dev_pool_put()
917 typeset -p SCRATCH_DEV_POOL_SAVED >/dev/null 2>&1
918 if [ $? -ne 0 ]; then
919 _fail "Bug: unset val, must call _scratch_dev_pool_get before _scratch_dev_pool_put"
922 if [ -z "$SCRATCH_DEV_POOL_SAVED" ]; then
923 _fail "Bug: str empty, must call _scratch_dev_pool_get before _scratch_dev_pool_put"
926 export SCRATCH_DEV_POOL=$SCRATCH_DEV_POOL_SAVED
927 export SCRATCH_DEV_POOL_SAVED=""
934 $MKFS_BTRFS_PROG $MKFS_OPTIONS $* $SCRATCH_DEV_POOL > /dev/null
937 echo "_scratch_pool_mkfs is not implemented for $FSTYP" 1>&2
942 # Return the amount of free memory available on the system
945 free -b | grep ^Mem | awk '{print $4}'
948 _available_memory_bytes()
950 nf=`free -b | grep ^Mem | awk '{print NF}'`
951 if [[ nf -lt 7 ]]; then
952 # Doesn't have available field. Fallback.
955 free -b | grep ^Mem | awk '{print $7}'
959 # Create fs of certain size on scratch device
960 # _scratch_mkfs_sized <size in bytes> [optional blocksize]
961 _scratch_mkfs_sized()
969 def_blksz=`echo $MKFS_OPTIONS | sed -rn 's/.*-b ?size= ?+([0-9]+).*/\1/p'`
971 ext2|ext3|ext4|ext4dev|udf|btrfs|reiser4|ocfs2|reiserfs)
972 def_blksz=`echo $MKFS_OPTIONS | sed -rn 's/.*-b ?+([0-9]+).*/\1/p'`
979 [ -n "$def_blksz" ] && blocksize=$def_blksz
980 [ -z "$blocksize" ] && blocksize=4096
983 if ! [[ $fssize =~ $re ]] ; then
984 _notrun "error: _scratch_mkfs_sized: fs size \"$fssize\" not an integer."
986 if ! [[ $blocksize =~ $re ]] ; then
987 _notrun "error: _scratch_mkfs_sized: block size \"$blocksize\" not an integer."
990 local blocks=`expr $fssize / $blocksize`
992 if [ -b "$SCRATCH_DEV" ]; then
993 local devsize=`blockdev --getsize64 $SCRATCH_DEV`
994 [ "$fssize" -gt "$devsize" ] && _notrun "Scratch device too small"
997 if [ "$FSTYP" = "xfs" ] && [ -b "$SCRATCH_RTDEV" ]; then
998 local rtdevsize=`blockdev --getsize64 $SCRATCH_RTDEV`
999 [ "$fssize" -gt "$rtdevsize" ] && _notrun "Scratch rt device too small"
1000 rt_ops="-r size=$fssize"
1005 # don't override MKFS_OPTIONS that set a block size.
1006 echo $MKFS_OPTIONS |egrep -q "b?size="
1007 if [ $? -eq 0 ]; then
1008 _scratch_mkfs_xfs -d size=$fssize $rt_ops
1010 _scratch_mkfs_xfs -d size=$fssize $rt_ops -b size=$blocksize
1013 ext2|ext3|ext4|ext4dev)
1014 ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
1017 # mkfs.gfs2 doesn't automatically shrink journal files on small
1018 # filesystems, so the journal files may end up being bigger than the
1019 # filesystem, which will cause mkfs.gfs2 to fail. Until that's fixed,
1020 # shrink the journal size to at most one eigth of the filesystem and at
1021 # least 8 MiB, the minimum size allowed.
1022 local min_journal_size=8
1023 local default_journal_size=128
1024 if (( fssize/8 / (1024*1024) < default_journal_size )); then
1025 local journal_size=$(( fssize/8 / (1024*1024) ))
1026 (( journal_size >= min_journal_size )) || journal_size=$min_journal_size
1027 MKFS_OPTIONS="-J $journal_size $MKFS_OPTIONS"
1029 ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -O -b $blocksize $SCRATCH_DEV $blocks
1032 yes | ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
1035 $MKFS_UDF_PROG $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
1039 # minimum size that's needed without the mixed option.
1040 # Ref: btrfs-prog: btrfs_min_dev_size()
1041 # Non mixed mode is also the default option.
1042 (( fssize < $((256 * 1024 *1024)) )) && mixed_opt='--mixed'
1043 $MKFS_BTRFS_PROG $MKFS_OPTIONS $mixed_opt -b $fssize $SCRATCH_DEV
1046 ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS $SCRATCH_DEV $blocks
1049 ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
1052 # mkfs.resier4 requires size in KB as input for creating filesystem
1053 $MKFS_REISER4_PROG $MKFS_OPTIONS -y -b $blocksize $SCRATCH_DEV \
1054 `expr $fssize / 1024`
1057 # mkfs.f2fs requires # of sectors as an input for the size
1058 local sector_size=`blockdev --getss $SCRATCH_DEV`
1059 $MKFS_F2FS_PROG $MKFS_OPTIONS $SCRATCH_DEV `expr $fssize / $sector_size`
1062 local free_mem=`_free_memory_bytes`
1063 if [ "$free_mem" -lt "$fssize" ] ; then
1064 _notrun "Not enough memory ($free_mem) for tmpfs with $fssize bytes"
1066 export MOUNT_OPTIONS="-o size=$fssize $TMPFS_MOUNT_OPTIONS"
1069 _notrun "Filesystem $FSTYP not supported in _scratch_mkfs_sized"
1074 # Emulate an N-data-disk stripe w/ various stripe units
1075 # _scratch_mkfs_geom <sunit bytes> <swidth multiplier> [optional blocksize]
1076 _scratch_mkfs_geom()
1078 local sunit_bytes=$1
1079 local swidth_mult=$2
1081 [ -z "$blocksize" ] && blocksize=4096
1083 local sunit_blocks=$(( sunit_bytes / blocksize ))
1084 local swidth_blocks=$(( sunit_blocks * swidth_mult ))
1088 if echo "$MKFS_OPTIONS" | egrep -q "b?size="; then
1089 MKFS_OPTIONS=$(echo "$MKFS_OPTIONS" | sed -r "s/(b?size=)[0-9]+k?/\1$blocksize/")
1091 MKFS_OPTIONS+=" -b size=$blocksize"
1094 if echo "$MKFS_OPTIONS" | egrep -q "(su|sunit|sw|swidth)="; then
1095 MKFS_OPTIONS=$(echo "$MKFS_OPTIONS" | sed -r \
1096 -e "s/(su|sunit)=[0-9kmg]+/su=$sunit_bytes/" \
1097 -e "s/(sw|swidth)=[0-9kmg]+/sw=$swidth_mult/")
1099 MKFS_OPTIONS+=" -d su=$sunit_bytes,sw=$swidth_mult"
1103 MKFS_OPTIONS+=" -b $blocksize -E stride=$sunit_blocks,stripe_width=$swidth_blocks"
1106 _notrun "can't mkfs $FSTYP with geometry"
1112 # Create fs of certain blocksize on scratch device
1113 # _scratch_mkfs_blocksized blocksize
1114 _scratch_mkfs_blocksized()
1119 if ! [[ $blocksize =~ $re ]] ; then
1120 _notrun "error: _scratch_mkfs_sized: block size \"$blocksize\" not an integer."
1125 _scratch_mkfs_xfs $MKFS_OPTIONS -b size=$blocksize
1128 ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV
1131 ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -O -b $blocksize $SCRATCH_DEV
1134 yes | ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize -C $blocksize $SCRATCH_DEV
1137 _notrun "Filesystem $FSTYP not supported in _scratch_mkfs_blocksized"
1146 xfs_io -x -c "resblks $1" $SCRATCH_MNT
1154 # Repair scratch filesystem. Returns 0 if the FS is good to go (either no
1155 # errors found or errors were fixed) and nonzero otherwise; also spits out
1156 # a complaint on stderr if fsck didn't tell us that the FS is good to go.
1157 _repair_scratch_fs()
1161 _scratch_xfs_repair "$@" 2>&1
1163 if [ "$res" -ne 0 ]; then
1164 echo "xfs_repair returns $res; replay log?"
1167 if [ "$res" -gt 0 ]; then
1168 echo "mount returns $res; zap log?"
1169 _scratch_xfs_repair -L 2>&1
1170 echo "log zap returns $?"
1172 umount "$SCRATCH_MNT"
1174 _scratch_xfs_repair "$@" 2>&1
1177 if [ $res -ne 0 ]; then
1178 _dump_err2 "xfs_repair failed, err=$res"
1183 local dev=$SCRATCH_DEV
1185 if [ $FSTYP = "overlay" -a -n "$OVL_BASE_SCRATCH_DEV" ]; then
1186 _repair_overlay_scratch_fs
1187 # Fall through to repair base fs
1188 dev=$OVL_BASE_SCRATCH_DEV
1189 fstyp=$OVL_BASE_FSTYP
1190 $UMOUNT_PROG $OVL_BASE_SCRATCH_MNT
1192 # Let's hope fsck -y suffices...
1193 fsck -t $fstyp -y $dev 2>&1
1196 $FSCK_OK|$FSCK_NONDESTRUCT|$FSCK_REBOOT)
1200 _dump_err2 "fsck.$FSTYP failed, err=$res"
1212 echo "Usage: _get_pids_by_name process-name" 1>&2
1216 # Algorithm ... all ps(1) variants have a time of the form MM:SS or
1217 # HH:MM:SS before the psargs field, use this as the search anchor.
1219 # Matches with $1 (process-name) occur if the first psarg is $1
1220 # or ends in /$1 ... the matching uses sed's regular expressions,
1221 # so passing a regex into $1 will work.
1226 -e 's/[ ][ ]*/ /g' \
1229 -e "/[0-9]:[0-9][0-9] *[^ ]*\/$1 /s/ .*//p" \
1230 -e "/[0-9]:[0-9][0-9] *$1 /s/ .*//p"
1234 # _df_device : get an IRIX style df line for a given device
1236 # - returns "" if not mounted
1237 # - returns fs type in field two (ala IRIX)
1238 # - joins line together if split by fancy df formatting
1239 # - strips header etc
1246 echo "Usage: _df_device device" 1>&2
1250 # Note that we use "==" here so awk doesn't try to interpret an NFS over
1251 # IPv6 server as a regular expression.
1252 $DF_PROG 2>/dev/null | $AWK_PROG -v what=$1 '
1253 ($1==what) && (NF==1) {
1267 # _df_dir : get an IRIX style df line for device where a directory resides
1269 # - returns fs type in field two (ala IRIX)
1270 # - joins line together if split by fancy df formatting
1271 # - strips header etc
1278 echo "Usage: _df_dir device" 1>&2
1282 $DF_PROG $1 2>/dev/null | $AWK_PROG -v what=$1 '
1298 # return percentage used disk space for mounted device
1304 echo "Usage: _used device" 1>&2
1308 _df_device $1 | $AWK_PROG '{ sub("%", "") ; print $6 }'
1311 # return the FS type of a mounted device
1317 echo "Usage: _fs_type device" 1>&2
1322 # The Linux kernel shows NFSv4 filesystems in df output as
1323 # filesystem type nfs4, although we mounted it as nfs earlier.
1324 # Fix the filesystem type up here so that the callers don't
1325 # have to bother with this quirk.
1327 _df_device $1 | $AWK_PROG '{ print $2 }' | \
1328 sed -e 's/nfs4/nfs/' -e 's/fuse.glusterfs/glusterfs/'
1331 # return the FS mount options of a mounted device
1333 # should write a version which just parses the output of mount for IRIX
1334 # compatibility, but since this isn't used at all, at the moment I'll leave
1341 echo "Usage: _fs_options device" 1>&2
1345 $AWK_PROG -v dev=$1 '
1346 match($1,dev) { print $4 }
1350 # returns device number if a file is a block device
1356 echo "Usage: _is_block_dev dev" 1>&2
1361 if [ -L "$dev" ]; then
1362 dev=`readlink -f "$dev"`
1365 if [ -b "$dev" ]; then
1366 $here/src/lstat64 "$dev" | $AWK_PROG '/Device type:/ { print $9 }'
1370 # returns device number if a file is a character device
1374 if [ $# -ne 1 ]; then
1375 echo "Usage: _is_char_dev dev" 1>&2
1380 if [ -L "$dev" ]; then
1381 dev=`readlink -f "$dev"`
1384 if [ -c "$dev" ]; then
1385 $here/src/lstat64 "$dev" | $AWK_PROG '/Device type:/ { print $9 }'
1389 # Do a command, log it to $seqres.full, optionally test return status
1390 # and die if command fails. If called with one argument _do executes the
1391 # command, logs it, and returns its exit status. With two arguments _do
1392 # first prints the message passed in the first argument, and then "done"
1393 # or "fail" depending on the return status of the command passed in the
1394 # second argument. If the command fails and the variable _do_die_on_error
1395 # is set to "always" or the two argument form is used and _do_die_on_error
1396 # is set to "message_only" _do will print an error message to
1397 # $seqres.out and exit.
1401 if [ $# -eq 1 ]; then
1403 elif [ $# -eq 2 ]; then
1408 echo "Usage: _do [note] cmd" 1>&2
1412 (eval "echo '---' \"$cmd\"") >>$seqres.full
1413 (eval "$cmd") >$tmp._out 2>&1
1415 cat $tmp._out >>$seqres.full
1417 if [ $# -eq 2 ]; then
1418 if [ $ret -eq 0 ]; then
1425 && [ "$_do_die_on_error" = "always" \
1426 -o \( $# -eq 2 -a "$_do_die_on_error" = "message_only" \) ]
1428 [ $# -ne 2 ] && echo
1429 eval "echo \"$cmd\" failed \(returned $ret\): see $seqres.full"
1436 # bail out, setting up .notrun file. Need to kill the filesystem check files
1437 # here, otherwise they are set incorrectly for the next test.
1441 echo "$*" > $seqres.notrun
1442 echo "$seq not run: $*"
1443 rm -f ${RESULT_DIR}/require_test*
1444 rm -f ${RESULT_DIR}/require_scratch*
1450 # just plain bail out
1454 echo "$*" | tee -a $seqres.full
1455 echo "(see $seqres.full for details)"
1460 # tests whether $FSTYP is one of the supported filesystems for a test
1468 if [ "$f" = "$FSTYP" -o "$f" = "generic" ]
1474 _notrun "not suitable for this filesystem type: $FSTYP"
1477 # check if a FS on a device is mounted
1478 # if so, verify that it is mounted on mount point
1479 # if fstype is given as argument, verify that it is also
1480 # mounted with correct fs type
1490 # find $dev as the source, and print result in "$dev $mnt" format
1491 local mount_rec=`findmnt -rncv -S $dev -o SOURCE,TARGET`
1492 [ -n "$mount_rec" ] || return 1 # 1 = not mounted
1494 # if it's mounted, make sure its on $mnt
1495 if [ "$mount_rec" != "$dev $mnt" ]; then
1496 echo "$devname=$dev is mounted but not on $mntname=$mnt - aborting"
1497 echo "Already mounted result:"
1499 return 2 # 2 = mounted on wrong mnt
1502 if [ -n "$type" -a "`_fs_type $dev`" != "$type" ]; then
1503 echo "$devname=$dev is mounted but not a type $type filesystem"
1504 # raw $DF_PROG cannot handle NFS/CIFS/overlay correctly
1506 return 3 # 3 = mounted as wrong type
1508 return 0 # 0 = mounted as expected
1511 # this test needs a scratch partition - check we're ok & unmount it
1512 # No post-test check of the device is required. e.g. the test intentionally
1513 # finishes the test with the filesystem in a corrupt state
1514 _require_scratch_nocheck()
1518 echo $SCRATCH_DEV | egrep -q ":/?" > /dev/null 2>&1
1519 if [ -z "$SCRATCH_DEV" -o "$?" != "0" ]; then
1520 _notrun "this test requires a valid \$SCRATCH_DEV"
1522 if [ ! -d "$SCRATCH_MNT" ]; then
1523 _notrun "this test requires a valid \$SCRATCH_MNT"
1527 if [ -z "$SCRATCH_DEV" ]; then
1528 _notrun "this test requires a valid \$SCRATCH_DEV"
1530 if [ ! -d "$SCRATCH_MNT" ]; then
1531 _notrun "this test requires a valid \$SCRATCH_MNT"
1535 echo $SCRATCH_DEV | grep -q ":/" > /dev/null 2>&1
1536 if [ -z "$SCRATCH_DEV" -o "$?" != "0" ]; then
1537 _notrun "this test requires a valid \$SCRATCH_DEV"
1539 if [ ! -d "$SCRATCH_MNT" ]; then
1540 _notrun "this test requires a valid \$SCRATCH_MNT"
1544 echo $SCRATCH_DEV | grep -q "://" > /dev/null 2>&1
1545 if [ -z "$SCRATCH_DEV" -o "$?" != "0" ]; then
1546 _notrun "this test requires a valid \$SCRATCH_DEV"
1548 if [ ! -d "$SCRATCH_MNT" ]; then
1549 _notrun "this test requires a valid \$SCRATCH_MNT"
1553 echo $SCRATCH_DEV | grep -q "//" > /dev/null 2>&1
1554 if [ -z "$SCRATCH_DEV" -o "$?" != "0" ]; then
1555 _notrun "this test requires a valid \$SCRATCH_DEV"
1557 if [ ! -d "$SCRATCH_MNT" ]; then
1558 _notrun "this test requires a valid \$SCRATCH_MNT"
1562 if [ -z "$OVL_BASE_SCRATCH_MNT" -o ! -d "$OVL_BASE_SCRATCH_MNT" ]; then
1563 _notrun "this test requires a valid \$OVL_BASE_SCRATCH_MNT as ovl base dir"
1565 # if $SCRATCH_MNT is derived from $OVL_BASE_SCRATCH_MNT then
1566 # don't check $SCRATCH_MNT dir here because base fs may not be mounted
1567 # and we will create the mount point anyway on _overlay_mount
1568 if [ "$SCRATCH_MNT" != "$OVL_BASE_SCRATCH_MNT/$OVL_MNT" -a ! -d "$SCRATCH_MNT" ]; then
1569 _notrun "this test requires a valid \$SCRATCH_MNT"
1573 if [ -z "$SCRATCH_DEV" -o ! -d "$SCRATCH_MNT" ];
1575 _notrun "this test requires a valid \$SCRATCH_MNT and unique \$SCRATCH_DEV"
1579 # ubifs needs an UBI volume. This will be a char device, not a block device.
1580 if [ ! -c "$SCRATCH_DEV" ]; then
1581 _notrun "this test requires a valid UBI volume for \$SCRATCH_DEV"
1583 if [ ! -d "$SCRATCH_MNT" ]; then
1584 _notrun "this test requires a valid \$SCRATCH_MNT"
1588 if [ -z "$SCRATCH_DEV" -o "`_is_block_dev "$SCRATCH_DEV"`" = "" ]
1590 _notrun "this test requires a valid \$SCRATCH_DEV"
1592 if [ "`_is_block_dev "$SCRATCH_DEV"`" = "`_is_block_dev "$TEST_DEV"`" ]
1594 _notrun "this test requires a valid \$SCRATCH_DEV"
1596 if [ ! -d "$SCRATCH_MNT" ]
1598 _notrun "this test requires a valid \$SCRATCH_MNT"
1603 _check_mounted_on SCRATCH_DEV $SCRATCH_DEV SCRATCH_MNT $SCRATCH_MNT
1605 [ $err -le 1 ] || exit 1
1608 # if it's mounted, unmount it
1609 if ! _scratch_unmount
1611 echo "failed to unmount $SCRATCH_DEV"
1615 rm -f ${RESULT_DIR}/require_scratch
1618 # we need the scratch device and it should be checked post test.
1621 _require_scratch_nocheck
1622 touch ${RESULT_DIR}/require_scratch
1625 # require a scratch dev of a minimum size (in kb)
1626 _require_scratch_size()
1628 [ $# -eq 1 ] || _fail "_require_scratch_size: expected size param"
1631 local devsize=`_get_device_size $SCRATCH_DEV`
1632 [ $devsize -lt $1 ] && _notrun "scratch dev too small"
1635 # require a scratch dev of a minimum size (in kb) and should not be checked
1637 _require_scratch_size_nocheck()
1639 [ $# -eq 1 ] || _fail "_require_scratch_size: expected size param"
1641 _require_scratch_nocheck
1642 local devsize=`_get_device_size $SCRATCH_DEV`
1643 [ $devsize -lt $1 ] && _notrun "scratch dev too small"
1646 # require scratch fs which supports >16T of filesystem size.
1647 _require_scratch_16T_support()
1651 _notrun "$FSTYP doesn't support >16T filesystem"
1654 _scratch_mkfs >> $seqres.full 2>&1
1656 local blocksize=$(_get_block_size $SCRATCH_MNT)
1657 if [ $blocksize -lt 4096 ]; then
1658 _notrun "This test requires >16T fs support"
1667 # this test needs a test partition - check we're ok & mount it
1673 echo $TEST_DEV | egrep -q ":/?" > /dev/null 2>&1
1674 if [ -z "$TEST_DEV" -o "$?" != "0" ]; then
1675 _notrun "this test requires a valid \$TEST_DEV"
1677 if [ ! -d "$TEST_DIR" ]; then
1678 _notrun "this test requires a valid \$TEST_DIR"
1682 if [ -z "$TEST_DEV" ]; then
1683 _notrun "this test requires a valid \$TEST_DEV"
1685 if [ ! -d "$TEST_DIR" ]; then
1686 _notrun "this test requires a valid \$TEST_DIR"
1690 echo $TEST_DEV | grep -q ":/" > /dev/null 2>&1
1691 if [ -z "$TEST_DEV" -o "$?" != "0" ]; then
1692 _notrun "this test requires a valid \$TEST_DEV"
1694 if [ ! -d "$TEST_DIR" ]; then
1695 _notrun "this test requires a valid \$TEST_DIR"
1699 echo $TEST_DEV | grep -q "//" > /dev/null 2>&1
1700 if [ -z "$TEST_DEV" -o "$?" != "0" ]; then
1701 _notrun "this test requires a valid \$TEST_DEV"
1703 if [ ! -d "$TEST_DIR" ]; then
1704 _notrun "this test requires a valid \$TEST_DIR"
1708 echo $TEST_DEV | grep -q "://" > /dev/null 2>&1
1709 if [ -z "$TEST_DEV" -o "$?" != "0" ]; then
1710 _notrun "this test requires a valid \$TEST_DIR"
1712 if [ ! -d "$TEST_DIR" ]; then
1713 _notrun "this test requires a valid \$TEST_DIR"
1717 if [ -z "$OVL_BASE_TEST_DIR" -o ! -d "$OVL_BASE_TEST_DIR" ]; then
1718 _notrun "this test requires a valid \$TEST_DIR as ovl base dir"
1720 if [ ! -d "$TEST_DIR" ]; then
1721 _notrun "this test requires a valid \$TEST_DIR"
1725 if [ -z "$TEST_DEV" -o ! -d "$TEST_DIR" ];
1727 _notrun "this test requires a valid \$TEST_DIR and unique $TEST_DEV"
1731 # ubifs needs an UBI volume. This will be a char device, not a block device.
1732 if [ ! -c "$TEST_DEV" ]; then
1733 _notrun "this test requires a valid UBI volume for \$TEST_DEV"
1735 if [ ! -d "$TEST_DIR" ]; then
1736 _notrun "this test requires a valid \$TEST_DIR"
1740 if [ -z "$TEST_DEV" ] || [ "`_is_block_dev "$TEST_DEV"`" = "" ]
1742 _notrun "this test requires a valid \$TEST_DEV"
1744 if [ "`_is_block_dev "$SCRATCH_DEV"`" = "`_is_block_dev "$TEST_DEV"`" ]
1746 _notrun "this test requires a valid \$TEST_DEV"
1748 if [ ! -d "$TEST_DIR" ]
1750 _notrun "this test requires a valid \$TEST_DIR"
1755 _check_mounted_on TEST_DEV $TEST_DEV TEST_DIR $TEST_DIR
1757 [ $err -le 1 ] || exit 1
1762 echo "!!! failed to mount $TEST_DEV on $TEST_DIR"
1766 touch ${RESULT_DIR}/require_test
1772 [ -z "$SCRATCH_LOGDEV" -o ! -b "$SCRATCH_LOGDEV" ] && ret=1
1773 [ "$USE_EXTERNAL" != yes ] && ret=1
1778 # this test needs a logdev
1782 [ -z "$SCRATCH_LOGDEV" -o ! -b "$SCRATCH_LOGDEV" ] && \
1783 _notrun "This test requires a valid \$SCRATCH_LOGDEV"
1784 [ "$USE_EXTERNAL" != yes ] && \
1785 _notrun "This test requires USE_EXTERNAL to be enabled"
1787 # ensure its not mounted
1788 $UMOUNT_PROG $SCRATCH_LOGDEV 2>/dev/null
1791 # this test requires loopback device support
1795 modprobe loop >/dev/null 2>&1
1796 if grep loop /proc/devices >/dev/null 2>&1
1800 _notrun "This test requires loopback device support"
1804 # this test requires kernel support for a secondary filesystem
1808 modprobe "$1" >/dev/null 2>&1
1809 grep -q -w "$1" /proc/filesystems ||
1810 _notrun "this test requires $1 support"
1813 # this test requires that (large) loopback device files are not in use
1815 _require_no_large_scratch_dev()
1817 [ "$LARGE_SCRATCH_DEV" = yes ] && \
1818 _notrun "Large filesystem testing in progress, skipped this test"
1821 # this test requires that a realtime subvolume is in use, and
1822 # that the kernel supports realtime as well.
1826 [ "$USE_EXTERNAL" = yes ] || \
1827 _notrun "External volumes not in use, skipped this test"
1828 [ "$SCRATCH_RTDEV" = "" ] && \
1829 _notrun "Realtime device required, skipped this test"
1832 # This test requires that a realtime subvolume is not in use
1834 _require_no_realtime()
1836 [ "$USE_EXTERNAL" = "yes" ] && [ -n "$SCRATCH_RTDEV" ] && \
1837 _notrun "Test not compatible with realtime subvolumes, skipped this test"
1840 # this test requires that a specified command (executable) exists
1841 # $1 - command, $2 - name for error message
1843 # Note: the command string might have parameters, so strip them before checking
1844 # whether it is executable.
1847 if [ $# -eq 2 ]; then
1849 elif [ $# -eq 1 ]; then
1852 _fail "usage: _require_command <command> [<name>]"
1855 local command=`echo "$1" | awk '{ print $1 }'`
1856 if [ ! -x "$command" ]; then
1857 _notrun "$name utility required, skipped this test"
1861 # this test requires the device to be valid block device
1863 _require_block_device()
1865 if [ -z "$1" ]; then
1866 echo "Usage: _require_block_device <dev>" 1>&2
1869 if [ "`_is_block_dev "$1"`" == "" ]; then
1870 _notrun "require $1 to be valid block disk"
1874 # this test requires a path to refere to a local block or character device
1876 _require_local_device()
1878 if [ -z "$1" ]; then
1879 echo "Usage: _require_local_device <dev>" 1>&2
1882 if [ "`_is_block_dev "$1"`" != "" ]; then
1885 if [ "`_is_char_dev "$1"`" != "" ]; then
1888 _notrun "require $1 to be local device"
1891 # brd based ram disks erase the device when they receive a flush command when no
1892 # active references are present. This causes problems for DM devices sitting on
1893 # top of brd devices as DM doesn't hold active references to the brd device.
1894 _require_sane_bdev_flush()
1896 echo $1 | grep -q "^/dev/ram[0-9]\+$"
1897 if [ $? -eq 0 ]; then
1898 _notrun "This test requires a sane block device flush"
1902 # this test requires a specific device mapper target
1903 _require_dm_target()
1907 # require SCRATCH_DEV to be a valid block device with sane BLKFLSBUF
1909 _require_block_device $SCRATCH_DEV
1910 _require_sane_bdev_flush $SCRATCH_DEV
1911 _require_command "$DMSETUP_PROG" dmsetup
1913 _normalize_mount_options | egrep -q "dax(=always| |$)" || \
1914 test -e "/sys/block/$(_short_dev $SCRATCH_DEV)/dax"
1915 if [ $? -eq 0 ]; then
1917 stripe|linear|log-writes)
1920 _notrun "Cannot run tests with DAX on $target devices."
1925 modprobe dm-$target >/dev/null 2>&1
1927 $DMSETUP_PROG targets 2>&1 | grep -q ^$target
1928 if [ $? -ne 0 ]; then
1929 _notrun "This test requires dm $target support"
1933 # this test requires the ext4 kernel support crc feature on scratch device
1935 _require_scratch_ext4_crc()
1937 _scratch_mkfs_ext4 >/dev/null 2>&1
1938 dumpe2fs -h $SCRATCH_DEV 2> /dev/null | grep -q metadata_csum || _notrun "metadata_csum not supported by this filesystem"
1939 _try_scratch_mount >/dev/null 2>&1 \
1940 || _notrun "Kernel doesn't support metadata_csum feature"
1944 # Check whether the specified feature whether it is supported by
1945 # mkfs.ext4 and the kernel.
1946 _require_scratch_ext4_feature()
1948 if [ -z "$1" ]; then
1949 echo "Usage: _require_scratch_ext4_feature feature"
1952 $MKFS_EXT4_PROG -F $MKFS_OPTIONS -O "$1" \
1953 $SCRATCH_DEV 512m >/dev/null 2>&1 \
1954 || _notrun "mkfs.ext4 doesn't support $1 feature"
1955 _try_scratch_mount >/dev/null 2>&1 \
1956 || _notrun "Kernel doesn't support the ext4 feature(s): $1"
1960 # this test requires that external log/realtime devices are not in use
1962 _require_nonexternal()
1964 [ "$USE_EXTERNAL" = yes ] && \
1965 _notrun "External device testing in progress, skipped this test"
1968 # this test requires that the kernel supports asynchronous I/O
1971 $here/src/feature -A
1976 _notrun "kernel does not support asynchronous I/O"
1979 _fail "unexpected error testing for asynchronous I/O support"
1984 # this test requires that a (specified) aio-dio executable exists
1985 # and that the kernel supports asynchronous I/O.
1986 # $1 - command (optional)
1992 AIO_TEST=$here/src/aio-dio-regress/aiodio_sparse2
1993 [ -x $AIO_TEST ] || _notrun "aio-dio utilities required"
1995 AIO_TEST=$here/src/aio-dio-regress/$1
1996 [ -x $AIO_TEST ] || _notrun "$AIO_TEST not built"
2002 # this test requires that the kernel supports IO_URING
2005 $here/src/feature -R
2010 _notrun "kernel does not support IO_URING"
2013 _fail "unexpected error testing for IO_URING support"
2018 # test whether the mount_setattr syscall is available
2019 _require_mount_setattr()
2021 $here/src/feature -r
2026 _notrun "kernel does not support mount_setattr syscall"
2029 _fail "unexpected error testing for mount_setattr support"
2034 # test whether idmapped mounts are supported
2035 _require_idmapped_mounts()
2037 IDMAPPED_MOUNTS_TEST=$here/src/idmapped-mounts/idmapped-mounts
2038 [ -x $IDMAPPED_MOUNTS_TEST ] || _notrun "idmapped-mounts utilities required"
2040 _require_mount_setattr
2042 $here/src/idmapped-mounts/idmapped-mounts --supported \
2043 --device "$TEST_DEV" \
2044 --mount "$TEST_DIR" \
2047 if [ $? -ne 0 ]; then
2048 _notrun "idmapped-mounts not support by $FSTYP"
2052 # this test requires that a test program exists under src/
2053 # $1 - command (require)
2055 _require_test_program()
2057 local prog=$here/src/$1
2058 [ -x $prog ] || _notrun "$prog not built"
2061 # run an aio-dio program
2067 echo "usage: _run_aiodio command_name" 2>&1
2073 local testtemp=$TEST_DIR/aio-testfile
2075 $AIO_TEST $testtemp 2>&1
2082 _require_timestamp_range()
2084 local device=${1:-$TEST_DEV}
2087 read tsmin tsmax <<<$(_filesystem_timestamp_range $device)
2088 if [ $tsmin -eq -1 -a $tsmax -eq -1 ]; then
2089 _notrun "filesystem $FSTYP timestamp bounds are unknown"
2092 # expect console warning from rw scratch mount if fs limit is near
2093 if [ $tsmax -le $((1<<31)) ] && \
2094 ! _check_dmesg_for "filesystem being mounted at .* supports timestamps until"
2096 _notrun "Kernel does not support timestamp limits"
2100 _filesystem_timestamp_range()
2102 local device=${1:-$TEST_DEV}
2103 local fstyp=${2:-$FSTYP}
2104 u32max=$(((1<<32)-1))
2106 s32max=$(((1<<31)-1))
2107 s64max=$(((1<<63)-1))
2112 echo "$s32min $s32max"
2115 if [ $(dumpe2fs -h $device 2>/dev/null | grep "Inode size:" | cut -d: -f2) -gt 128 ]; then
2116 printf "%d %d\n" $s32min 0x37fffffff
2118 echo "$s32min $s32max"
2126 echo "$s32min $s32max"
2129 echo "$s64min $s64max"
2132 if [ ! -z $OVL_BASE_FSTYP -a $OVL_BASE_FSTYP != "overlay" ]; then
2133 _filesystem_timestamp_range $OVL_BASE_TEST_DEV $OVL_BASE_FSTYP
2144 # indicate whether YP/NIS is active or not
2149 dn=$(domainname 2>/dev/null)
2150 local ypcat=$(type -P ypcat)
2151 local rpcinfo=$(type -P rpcinfo)
2152 test -n "${dn}" -a "${dn}" != "(none)" -a "${dn}" != "localdomain" -a -n "${ypcat}" -a -n "${rpcinfo}" && \
2153 "${rpcinfo}" -p localhost 2>/dev/null | grep -q ypbind
2157 # cat the password file
2161 [ $(_yp_active) -eq 0 ] && ypcat passwd
2165 # cat the group file
2169 [ $(_yp_active) -eq 0 ] && ypcat group
2173 # check for a user on the machine, fsgqa as default
2181 _cat_passwd | grep -q $qa_user
2182 [ "$?" == "0" ] || _notrun "$qa_user user not defined."
2183 echo /bin/true | su $qa_user
2184 [ "$?" == "0" ] || _notrun "$qa_user cannot execute commands."
2187 # check for a group on the machine, fsgqa as default
2195 _cat_group | grep -q $qa_group
2196 [ "$?" == "0" ] || _notrun "$qa_group group not defined."
2202 s,.*Permission\sdenied.*,Permission denied,;
2203 s,.*no\saccess\sto\stty.*,,;
2204 s,.*no\sjob\scontrol\sin\sthis\sshell.*,,;
2211 echo $1 | su -s /bin/bash $qa_user 2>&1 | _filter_user_do
2214 _require_xfs_io_command()
2218 echo "Usage: _require_xfs_io_command command [switch]" 1>&2
2224 local param_checked=""
2228 local testfile=$TEST_DIR/$$.xfs_io
2232 # Test xfs_io lsattr support and filesystem FS_IOC_FSSETXATTR
2234 testio=`$XFS_IO_PROG -F -f -c "lsattr $param" $testfile 2>&1`
2235 param_checked="$param"
2238 local testdir=$TEST_DIR/$$.attr_dir
2239 mkdir $TEST_DIR/$$.attr_dir
2240 if [ -z "$param" ]; then
2243 # Test xfs_io chattr support AND
2244 # filesystem FS_IOC_FSSETXATTR support
2245 # 'tPnE' flags are only valid for a directory so check them on a directory.
2246 if echo "$param" | egrep -q 't|P|n|E'; then
2247 testio=`$XFS_IO_PROG -F -c "chattr +$param" $testdir 2>&1`
2248 attr_info=`$XFS_IO_PROG -F -r -c "lsattr" $testdir | awk '{print $1}'`
2249 $XFS_IO_PROG -F -r -c "chattr -$param" $testdir 2>&1
2251 testio=`$XFS_IO_PROG -F -f -c "chattr +$param" $testfile 2>&1`
2252 attr_info=`$XFS_IO_PROG -F -r -c "lsattr" $testfile | awk '{print $1}'`
2253 $XFS_IO_PROG -F -r -c "chattr -$param" $testfile 2>&1
2255 param_checked="+$param"
2256 rm -rf $testdir 2>&1 > /dev/null
2259 testio=`$XFS_IO_PROG -F -f -c "chproj 0" $testfile 2>&1`
2262 local testcopy=$TEST_DIR/$$.copy.xfs_io
2263 local copy_opts=$testfile
2264 if [ "$param" == "-f" ]; then
2265 # source file is the open destination file
2267 copy_opts="0 -d 4k -l 4k"
2269 $XFS_IO_PROG -F -f -c "pwrite 0 4k" $testfile > /dev/null 2>&1
2270 testio=`$XFS_IO_PROG -F -f -c "copy_range $param $copy_opts" $testcopy 2>&1`
2271 rm -f $testcopy > /dev/null 2>&1
2272 param_checked="$param"
2275 testio=`$XFS_IO_PROG -F -f -c "falloc $param 0 1m" $testfile 2>&1`
2276 param_checked="$param"
2278 "fpunch" | "fcollapse" | "zero" | "fzero" | "finsert" | "funshare")
2279 local blocksize=$(_get_block_size $TEST_DIR)
2280 testio=`$XFS_IO_PROG -F -f -c "pwrite 0 $((5 * $blocksize))" \
2281 -c "fsync" -c "$command $blocksize $((2 * $blocksize))" \
2285 # If 'ranged' is passed as argument then we check to see if fiemap supports
2286 # ranged query params
2287 if echo "$param" | grep -q "ranged"; then
2288 param=$(echo "$param" | sed "s/ranged//")
2289 $XFS_IO_PROG -c "help fiemap" | grep -q "\[offset \[len\]\]"
2290 [ $? -eq 0 ] || _notrun "xfs_io $command ranged support is missing"
2292 testio=`$XFS_IO_PROG -F -f -c "pwrite 0 20k" -c "fsync" \
2293 -c "fiemap -v $param" $testfile 2>&1`
2294 param_checked="$param"
2297 local testlink=$TEST_DIR/$$.link.xfs_io
2298 testio=`$XFS_IO_PROG -F -f -c "flink $testlink" $testfile 2>&1`
2299 rm -f $testlink > /dev/null 2>&1
2302 # Check O_TMPFILE support in xfs_io, kernel and fs
2303 testio=`$XFS_IO_PROG -T -c quit $TEST_DIR 2>&1`
2304 echo $testio | egrep -q "invalid option|Is a directory" && \
2305 _notrun "xfs_io $command support is missing"
2306 echo $testio | grep -q "Operation not supported" && \
2307 _notrun "O_TMPFILE is not supported"
2310 testio=`$XFS_IO_PROG -f -c "fsmap" $testfile 2>&1`
2311 echo $testio | grep -q "Inappropriate ioctl" && \
2312 _notrun "xfs_io $command support is missing"
2315 testio=`$XFS_IO_PROG -c "label" $TEST_DIR 2>&1`
2318 # -c "open $f" is broken in xfs_io <= 4.8. Along with the fix,
2319 # a new -C flag was introduced to execute one shot commands.
2320 # Check for -C flag support as an indication for the bug fix.
2321 testio=`$XFS_IO_PROG -F -f -C "open $testfile" $testfile 2>&1`
2322 echo $testio | grep -q "invalid option" && \
2323 _notrun "xfs_io $command support is missing"
2326 # -N (RWF_NOWAIT) only works with direct vectored I/O writes
2327 local pwrite_opts=" "
2328 if [ "$param" == "-N" ]; then
2330 pwrite_opts+="-V 1 -b 4k"
2332 testio=`$XFS_IO_PROG -f $opts -c \
2333 "pwrite $pwrite_opts $param 0 4k" $testfile 2>&1`
2334 param_checked="$pwrite_opts $param"
2337 testio=`$XFS_IO_PROG -x -c "$command probe" $TEST_DIR 2>&1`
2338 echo $testio | grep -q "Inappropriate ioctl" && \
2339 _notrun "xfs_io $command support is missing"
2342 testio=`$XFS_IO_PROG -f -c "utimes 0 0 0 0" $testfile 2>&1`
2346 testio=`$XFS_IO_PROG -c "syncfs" $testfile 2>&1`
2349 testio=`$XFS_IO_PROG -c "help $command" 2>&1`
2352 rm -f $testfile 2>&1 > /dev/null
2353 echo $testio | grep -q "not found" && \
2354 _notrun "xfs_io $command $param_checked support is missing"
2355 echo $testio | grep -q "Operation not supported\|Inappropriate ioctl" && \
2356 _notrun "xfs_io $command $param_checked failed (old kernel/wrong fs?)"
2357 echo $testio | grep -q "Invalid" && \
2358 _notrun "xfs_io $command $param_checked failed (old kernel/wrong fs/bad args?)"
2359 echo $testio | grep -q "foreign file active" && \
2360 _notrun "xfs_io $command $param_checked not supported on $FSTYP"
2361 echo $testio | grep -q "Function not implemented" && \
2362 _notrun "xfs_io $command $param_checked support is missing (missing syscall?)"
2363 echo $testio | grep -q "unknown flag" && \
2364 _notrun "xfs_io $command $param_checked support is missing (unknown flag)"
2366 [ -n "$param" ] || return
2368 if [ -z "$param_checked" ]; then
2369 $XFS_IO_PROG -c "help $command" | grep -E -q "^ $param ([a-zA-Z_]+ )?--" || \
2370 _notrun "xfs_io $command doesn't support $param"
2372 # xfs_io could result in "command %c not supported" if it was
2373 # built on kernels not supporting pwritev2() calls
2374 echo $testio | grep -q "\(invalid option\|not supported\)" && \
2375 _notrun "xfs_io $command doesn't support $param"
2378 # On XFS, ioctl(FSSETXATTR)(called by xfs_io -c "chattr") maskes off unsupported
2379 # or invalid flags silently so need to check these flags by extra ioctl(FSGETXATTR)
2380 # (called by xfs_io -c "lsattr").
2381 # The following URL explains why we don't change the behavior of XFS.
2382 # https://www.spinics.net/lists/linux-xfs/msg44725.html
2383 if [ -n "$attr_info" -a "$FSTYP" = "xfs" ]; then
2385 for i in $(seq 0 $((num-1))); do
2386 echo $attr_info | grep -q "${param:$i:1}" || \
2387 _notrun "xfs_io $command +${param:$i:1} support is missing (unknown flag in kernel)"
2392 # check that kernel and filesystem support direct I/O
2395 if [ $FSTYP = "ext4" ] || [ $FSTYP = "f2fs" ] ; then
2396 if echo "$MOUNT_OPTIONS" | grep -q "test_dummy_encryption"; then
2397 _notrun "$FSTYP encryption doesn't support O_DIRECT"
2400 if [ $FSTYP = "ext4" ] ; then
2401 if echo "$MOUNT_OPTIONS" | grep -q "data=journal"; then
2402 _notrun "ext4 data journaling doesn't support O_DIRECT"
2405 local testfile=$TEST_DIR/$$.direct
2406 $XFS_IO_PROG -F -f -d -c "pwrite 0 20k" $testfile > /dev/null 2>&1
2407 if [ $? -ne 0 ]; then
2408 _notrun "O_DIRECT is not supported"
2410 rm -f $testfile 2>&1 > /dev/null
2413 _format_swapfile() {
2420 # Swap files must be nocow on Btrfs.
2421 $CHATTR_PROG +C "$fname" > /dev/null 2>&1
2422 _pwrite_byte 0x61 0 "$sz" "$fname" >> $seqres.full
2423 $MKSWAP_PROG "$fname" >> $seqres.full
2426 # Check that the filesystem supports swapfiles
2427 _require_scratch_swapfile()
2430 _require_command "$MKSWAP_PROG" "mkswap"
2432 _scratch_mkfs >/dev/null 2>&1
2434 # With mounting SELinux context(e.g. system_u:object_r:root_t:s0),
2435 # standard mkswap tried to reset the type of default context to
2436 # swapfile_t if it's not swapfile_t, and then it failed and returned
2437 # ENOTSUP expectedly as we don't want to create any SELinux attr on
2438 # purpose. standard mkswap ignored this relabel error by commit
2439 # d97dc0e of util-linux, but it still reported the error before
2440 # commit d97dc0e. We mount swapfile context directly to skip the
2442 [ -n "$SELINUX_MOUNT_OPTIONS" ] && export \
2443 SELINUX_MOUNT_OPTIONS="-o context=system_u:object_r:swapfile_t:s0"
2447 # Minimum size for mkswap is 10 pages
2448 _format_swapfile "$SCRATCH_MNT/swap" $(($(get_page_size) * 10))
2450 # ext* and xfs have supported all variants of swap files since their
2451 # introduction, so swapon should not fail.
2454 if ! swapon "$SCRATCH_MNT/swap" >/dev/null 2>&1; then
2456 _fail "swapon failed for $FSTYP"
2460 if ! swapon "$SCRATCH_MNT/swap" >/dev/null 2>&1; then
2462 _notrun "swapfiles are not supported"
2467 swapoff "$SCRATCH_MNT/swap" >/dev/null 2>&1
2471 # Check that a fs has enough free space (in 1024b blocks)
2476 local blocks=$2 # in units of 1024
2477 local gb=$(( blocks / 1024 / 1024 ))
2479 local free_blocks=`df -kP $mnt | grep -v Filesystem | awk '{print $4}'`
2480 [ $free_blocks -lt $blocks ] && \
2481 _notrun "This test requires at least ${gb}GB free on $mnt to run"
2485 # Check if the filesystem supports sparse files.
2487 # Unfortunately there is no better way to do this than a manual black list.
2489 _require_sparse_files()
2493 _notrun "Sparse files not supported by this filesystem type: $FSTYP"
2502 #boot_params always present in debugfs
2503 [ -d "$DEBUGFS_MNT/boot_params" ] || _notrun "Debugfs not mounted"
2506 _require_fail_make_request()
2508 [ -f "$DEBUGFS_MNT/fail_make_request/probability" ] \
2509 || _notrun "$DEBUGFS_MNT/fail_make_request \
2510 not found. Seems that CONFIG_FAULT_INJECTION_DEBUG_FS kernel config option not enabled"
2513 # Disable extent zeroing for ext4 on the given device
2514 _ext4_disable_extent_zeroout()
2516 local dev=${1:-$TEST_DEV}
2517 local sdev=`_short_dev $dev`
2519 [ -f /sys/fs/ext4/$sdev/extent_max_zeroout_kb ] && \
2520 echo 0 >/sys/fs/ext4/$sdev/extent_max_zeroout_kb
2523 # The default behavior of SEEK_HOLE is to always return EOF.
2524 # Filesystems that implement non-default behavior return the offset
2525 # of holes with SEEK_HOLE. There is no way to query the filesystem
2526 # of which behavior it is implementing.
2527 # We use this whitelist FSTYP, to set expectation and avoid silent
2528 # regression of filesystem seek hole behavior.
2531 _fstyp_has_non_default_seek_data_hole()
2540 btrfs|ext4|xfs|cifs|f2fs|gfs2|ocfs2|tmpfs)
2544 # NFSv2 and NFSv3 only support default behavior of SEEK_HOLE,
2545 # while NFSv4 supports non-default behavior
2546 local nfsvers=`_df_device $TEST_DEV | $AWK_PROG '{ print $2 }'`
2547 [ "$nfsvers" = "nfs4" ]
2551 if [ ! -z $OVL_BASE_FSTYP -a $OVL_BASE_FSTYP != "overlay" ]; then
2552 _fstyp_has_non_default_seek_data_hole $OVL_BASE_FSTYP
2555 # Assume that base fs has default behavior
2560 # by default fstyp has default SEEK_HOLE behavior;
2561 # if your fs has non-default behavior, add it to whitelist above!
2567 # Run seek sanity test with predefined expectation for SEEK_DATA/HOLE behavior
2568 _run_seek_sanity_test()
2571 if _fstyp_has_non_default_seek_data_hole; then
2574 $here/src/seek_sanity_test $testseekargs $*
2577 # Check if the file system supports seek_data/hole
2578 _require_seek_data_hole()
2580 local dev=${1:-$TEST_DEV}
2581 local testfile=$TEST_DIR/$$.seek
2582 local testseek=`$here/src/seek_sanity_test -t $testfile 2>&1`
2584 rm -f $testfile &>/dev/null
2585 echo $testseek | grep -q "Kernel does not support" && \
2586 _notrun "File system does not support llseek(2) SEEK_DATA/HOLE"
2587 # Disable extent zeroing for ext4 as that change where holes are
2589 if [ "$FSTYP" = "ext4" ]; then
2590 _ext4_disable_extent_zeroout $dev
2596 _require_test_program "runas"
2601 "$here/src/runas" "$@"
2604 _require_richacl_prog()
2606 _require_command "$GETRICHACL_PROG" getrichacl
2607 _require_command "$SETRICHACL_PROG" setrichacl
2610 _require_scratch_richacl_xfs()
2612 _scratch_mkfs_xfs_supported -m richacl=1 >/dev/null 2>&1 \
2613 || _notrun "mkfs.xfs doesn't have richacl feature"
2614 _scratch_mkfs_xfs -m richacl=1 >/dev/null 2>&1
2615 _try_scratch_mount >/dev/null 2>&1 \
2616 || _notrun "kernel doesn't support richacl feature on $FSTYP"
2620 _require_scratch_richacl_ext4()
2622 _scratch_mkfs -O richacl >/dev/null 2>&1 \
2623 || _notrun "can't mkfs $FSTYP with option -O richacl"
2624 _try_scratch_mount >/dev/null 2>&1 \
2625 || _notrun "kernel doesn't support richacl feature on $FSTYP"
2629 _require_scratch_richacl_support()
2632 $GETFATTR_PROG -n system.richacl >/dev/null 2>&1 \
2633 || _notrun "this test requires richacl support on \$SCRATCH_DEV"
2637 _require_scratch_richacl()
2640 xfs) _require_scratch_richacl_xfs
2642 ext4) _require_scratch_richacl_ext4
2645 _require_scratch_richacl_support
2647 *) _notrun "this test requires richacl support on \$SCRATCH_DEV"
2652 _scratch_mkfs_richacl()
2655 xfs) _scratch_mkfs_xfs -m richacl=1
2657 ext4) _scratch_mkfs -O richacl
2665 # check if the given device is mounted, if so, return mount point
2669 local fstype=${2:-$FSTYP}
2671 if [ $# -lt 1 ]; then
2672 echo "Usage: _is_dev_mounted <device> [fstype]" 1>&2
2676 findmnt -rncv -S $dev -t $fstype -o TARGET | head -1
2679 # check if the given dir is a mount point, if so, return mount point
2680 _is_dir_mountpoint()
2683 local fstype=${2:-$FSTYP}
2685 if [ $# -lt 1 ]; then
2686 echo "Uasge: _is_dir_mountpoint <dir> [fstype]" 1>&2
2690 findmnt -rncv -t $fstype -o TARGET $dir | head -1
2693 # remount a FS to a new mode (ro or rw)
2699 echo "Usage: _remount device ro/rw" 1>&2
2705 if ! mount -o remount,$mode $device
2707 echo "_remount: failed to remount filesystem on $device as $mode"
2712 # Run the appropriate repair/check on a filesystem
2714 # if the filesystem is mounted, it's either remounted ro before being
2715 # checked or it's unmounted and then remounted
2718 # If set, we remount ro instead of unmounting for fsck
2721 _umount_or_remount_ro()
2725 echo "Usage: _umount_or_remount_ro <device>" 1>&2
2730 local mountpoint=`_is_dev_mounted $device`
2732 if [ $USE_REMOUNT -eq 0 ]; then
2733 $UMOUNT_PROG $device
2740 _mount_or_remount_rw()
2742 if [ $# -ne 3 ]; then
2743 echo "Usage: _mount_or_remount_rw <opts> <dev> <mnt>" 1>&2
2750 if [ $USE_REMOUNT -eq 0 ]; then
2751 if [ "$FSTYP" != "overlay" ]; then
2752 _mount -t $FSTYP $mount_opts $device $mountpoint
2754 _overlay_mount $device $mountpoint
2756 if [ $? -ne 0 ]; then
2757 _dump_err "!!! failed to remount $device on $mountpoint"
2767 # Check a generic filesystem in no-op mode; this assumes that the
2768 # underlying fsck program accepts "-n" for a no-op (check-only) run,
2769 # and that it will still return an errno for corruption in this mode.
2771 # Filesystems which don't support this will need to define their
2772 # own check routine.
2774 _check_generic_filesystem()
2778 # If type is set, we're mounted
2779 local type=`_fs_type $device`
2782 if [ "$type" = "$FSTYP" ]
2785 local mountpoint=`_umount_or_remount_ro $device`
2788 fsck -t $FSTYP $FSCK_OPTIONS $device >$tmp.fsck 2>&1
2791 _log_err "_check_generic_filesystem: filesystem on $device is inconsistent"
2792 echo "*** fsck.$FSTYP output ***" >>$seqres.full
2793 cat $tmp.fsck >>$seqres.full
2794 echo "*** end fsck.$FSTYP output" >>$seqres.full
2800 if [ $ok -eq 0 ] && [ -n "$DUMP_CORRUPT_FS" ]; then
2803 local flatdev="$(basename "$device")"
2804 _ext4_metadump "$seqres.$flatdev.check.qcow2" "$device" compress
2811 echo "*** mount output ***" >>$seqres.full
2812 _mount >>$seqres.full
2813 echo "*** end mount output" >>$seqres.full
2814 elif [ "$type" = "$FSTYP" ]
2817 _mount_or_remount_rw "$MOUNT_OPTIONS" $device $mountpoint
2821 if [ $ok -eq 0 ]; then
2823 if [ "$iam" != "check" ]; then
2832 # Filter the knowen errors the UDF Verifier reports.
2833 _udf_test_known_error_filter()
2835 egrep -v "PVD 60 Error: Interchange Level: 1, Maximum Interchange Level: 0|FSD 28 Error: Interchange Level: 1, Maximum Interchange Level: 1,|PVD 72 Warning: Volume Set Identifier: \"\*IRIX UDF\",|Warning: [0-9]+ unused blocks NOT marked as unallocated."
2839 _check_udf_filesystem()
2841 [ "$DISABLE_UDF_TEST" == "1" ] && return
2843 if [ $# -ne 1 -a $# -ne 2 ]
2845 echo "Usage: _check_udf_filesystem device [last_block]" 1>&2
2849 if [ ! -x $here/src/udf_test ]
2851 echo "udf_test not installed, please download and build the Philips"
2852 echo "UDF Verification Software from http://www.extra.research.philips.com/udf/."
2853 echo "Then copy the udf_test binary to $here/src/."
2854 echo "If you do not wish to run udf_test then set environment variable DISABLE_UDF_TEST"
2861 if [ $# -eq 2 ]; then
2862 opt_arg="-lastvalidblock $(( $2 - 1 ))"
2865 rm -f $seqres.checkfs
2866 sleep 1 # Due to a problem with time stamps in udf_test
2867 $here/src/udf_test $opt_arg $device | tee $seqres.checkfs | egrep "Error|Warning" | \
2868 _udf_test_known_error_filter | \
2869 egrep -iv "Error count:.*[0-9]+.*total occurrences:.*[0-9]+|Warning count:.*[0-9]+.*total occurrences:.*[0-9]+" && \
2870 echo "Warning UDF Verifier reported errors see $seqres.checkfs." && return 1
2881 # no way to check consistency for nfs
2884 # no way to check consistency for cifs
2887 # no way to check consistency for 9p
2890 # no way to check consistency for virtiofs
2893 # no way to check consistency for CephFS
2896 # no way to check consistency for GlusterFS
2899 _check_overlay_test_fs
2904 # do nothing for now
2907 _check_btrfs_filesystem $TEST_DEV
2910 # no way to check consistency for tmpfs
2913 # there is no fsck program for ubifs yet
2916 _check_generic_filesystem $TEST_DEV
2923 local device=$SCRATCH_DEV
2924 [ $# -eq 1 ] && device=$1
2928 local scratch_log="none"
2929 local scratch_rt="none"
2930 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
2931 scratch_log="$SCRATCH_LOGDEV"
2933 [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_RTDEV" ] && \
2934 scratch_rt="$SCRATCH_RTDEV"
2936 _check_xfs_filesystem $device $scratch_log $scratch_rt
2939 _check_udf_filesystem $device $udf_fsize
2942 # Don't know how to check an NFS filesystem, yet.
2945 # Don't know how to check a CIFS filesystem, yet.
2948 # no way to check consistency for 9p
2951 # no way to check consistency for virtiofs
2954 # no way to check consistency for CephFS
2957 # no way to check consistency for GlusterFS
2960 _check_overlay_scratch_fs
2965 _check_btrfs_filesystem $device
2968 # no way to check consistency for tmpfs
2971 # there is no fsck program for ubifs yet
2974 _check_generic_filesystem $device
2979 _full_fstyp_details()
2981 [ -z "$FSTYP" ] && FSTYP=xfs
2982 if [ $FSTYP = xfs ]; then
2983 if [ -d /proc/fs/xfs ]; then
2984 if grep -q 'debug 0' /proc/fs/xfs/stat; then
2985 FSTYP="$FSTYP (non-debug)"
2986 elif grep -q 'debug 1' /proc/fs/xfs/stat; then
2987 FSTYP="$FSTYP (debug)"
2990 if uname -a | grep -qi 'debug'; then
2991 FSTYP="$FSTYP (debug)"
2993 FSTYP="$FSTYP (non-debug)"
3000 _full_platform_details()
3003 local host=`hostname -s`
3004 local kernel=`uname -rv`
3005 local platform=`uname -m`
3006 echo "$os/$platform $host $kernel"
3011 if [ "`uname`" == "Linux" ]; then
3014 echo Unknown operating system: `uname`
3019 _link_out_file_named()
3022 local suffix=$(FEATURES="$features" perl -e '
3024 my $feature, $result, $suffix, $opts;
3026 foreach $feature (split(/,/, $ENV{"FEATURES"})) {
3027 $feathash{$feature} = 1;
3029 $result = "default";
3034 ($opts, $suffix) = split(/ *: */);
3035 foreach my $opt (split(/,/, $opts)) {
3036 if (!exists($feathash{$opt})) {
3049 ln -fs $(basename $1).$suffix $1
3056 if [ $# -eq 0 ]; then
3057 features="$(_get_os_name),$FSTYP"
3058 if [ -n "$MOUNT_OPTIONS" ]; then
3059 features=$features,${MOUNT_OPTIONS##"-o "}
3065 _link_out_file_named $seqfull.out "$features"
3074 # convert urandom incompressible data to compressible text data
3077 od /dev/urandom | dd iflag=fullblock ${*}
3080 #takes files, randomdata
3088 if [ $size -gt 0 ]; then
3089 if [ "$2" == "false" ]; then
3090 dd if=/dev/zero of=$file bs=1024 count=$size 2>&1 | _filter_dd
3091 elif [ "$2" == "comp" ]; then
3092 _ddt of=$file bs=1024 count=$size 2>&1 | _filter_dd
3094 dd if=/dev/urandom of=$file bs=1024 count=$size 2>&1 | _filter_dd
3101 # takes dirname, depth, randomdata
3104 local dirname=$1 depth=$2 randomdata=$3
3105 mkdir $dirname || die "mkdir $dirname failed"
3108 _nfiles $files $randomdata # files for this dir and data type
3110 [ $depth -eq 0 ] && return
3111 local deep=$(( depth - 1 )) # go 1 down
3113 [ $verbose = true ] && echo "descending, depth from leaves = $deep"
3116 while [ $d -lt $dirs ]
3118 _descend d$d $deep &
3124 # Populate a filesystem with inodes for performance experiments
3126 # usage: populate [-v] [-n ndirs] [-f nfiles] [-d depth] [-r root] [-s size] [-x]
3131 local dirs=5 # ndirs in each subdir till leaves
3132 local size=0 # sizeof files in K
3133 local files=100 # num files in _each_ subdir
3134 local depth=2 # depth of tree from root to leaves
3136 local root=root # path of initial root of directory tree
3137 local randomdata=false # -x data type urandom, zero or compressible
3141 while getopts "d:f:n:r:s:v:x:c" c
3150 x) randomdata=true;;
3151 c) randomdata=comp;;
3155 _descend $root $depth $randomdata
3160 [ $verbose = true ] && echo done
3163 # query whether the given file has the given inode flag set
3170 if $XFS_IO_PROG -r -c 'lsattr -v' "$file" | grep -q "$flag" ; then
3176 # query the given files extsize allocator hint in bytes (if any)
3183 blocks=`$XFS_IO_PROG -r -c 'stat' "$file" | \
3184 awk '/^xattr.extsize =/ { print $3 }'`
3185 [ -z "$blocks" ] && blocks="0"
3189 # scratch_dev_pool should contain the disks pool for the btrfs raid
3190 _require_scratch_dev_pool()
3195 if [ -z "$SCRATCH_DEV_POOL" ]; then
3196 _notrun "this test requires a valid \$SCRATCH_DEV_POOL"
3199 if [ -z "$1" ]; then
3205 # btrfs test case needs ndevs or more scratch_dev_pool; other FS not sure
3209 if [ "`echo $SCRATCH_DEV_POOL|wc -w`" -lt $ndevs ]; then
3210 _notrun "btrfs and this test needs $ndevs or more disks in SCRATCH_DEV_POOL"
3214 _notrun "dev_pool is not supported by fstype \"$FSTYP\""
3218 for i in $SCRATCH_DEV_POOL; do
3219 if [ "`_is_block_dev "$i"`" = "" ]; then
3220 _notrun "this test requires valid block disk $i"
3222 if [ "`_is_block_dev "$i"`" = "`_is_block_dev "$TEST_DEV"`" ]; then
3223 _notrun "$i is part of TEST_DEV, this test requires unique disks"
3225 if _mount | grep -q $i; then
3226 if ! $UMOUNT_PROG $i; then
3227 echo "failed to unmount $i - aborting"
3231 # to help better debug when something fails, we remove
3232 # traces of previous btrfs FS on the dev.
3233 dd if=/dev/zero of=$i bs=4096 count=100 > /dev/null 2>&1
3237 # ensure devices in SCRATCH_DEV_POOL are of the same size
3238 # must be called after _require_scratch_dev_pool
3239 _require_scratch_dev_pool_equal_size()
3245 # SCRATCH_DEV has been set to the first device in SCRATCH_DEV_POOL
3246 size=`_get_device_size $SCRATCH_DEV`
3247 for dev in $SCRATCH_DEV_POOL; do
3248 newsize=`_get_device_size $dev`
3249 if [ $size -ne $newsize ]; then
3250 _notrun "This test requires devices in SCRATCH_DEV_POOL have the same size"
3256 # Check that fio is present, and it is able to execute given jobfile
3261 _require_command "$FIO_PROG" fio
3262 if [ -z "$1" ]; then
3266 $FIO_PROG --warnings-fatal --showcmd $job >> $seqres.full 2>&1
3267 [ $? -eq 0 ] || _notrun "$FIO_PROG too old, see $seqres.full"
3270 # Does freeze work on this fs?
3273 xfs_freeze -f "$TEST_DIR" >/dev/null 2>&1
3275 xfs_freeze -u "$TEST_DIR" >/dev/null 2>&1
3276 [ $result -eq 0 ] || _notrun "$FSTYP does not support freezing"
3279 # Does NFS export work on this fs?
3282 _require_test_program "open_by_handle"
3283 mkdir -p "$TEST_DIR"/exportfs_test
3284 $here/src/open_by_handle -c "$TEST_DIR"/exportfs_test 2>&1 \
3285 || _notrun "$FSTYP does not support NFS export"
3289 # Does shutdown work on this fs?
3290 _require_scratch_shutdown()
3292 [ -x $here/src/godown ] || _notrun "src/godown executable not found"
3294 _scratch_mkfs > /dev/null 2>&1 || _notrun "_scratch_mkfs failed on $SCRATCH_DEV"
3297 if [ $FSTYP = "overlay" ]; then
3298 if [ -z $OVL_BASE_SCRATCH_DEV ]; then
3299 # In lagacy overlay usage, it may specify directory as
3300 # SCRATCH_DEV, in this case OVL_BASE_SCRATCH_DEV
3301 # will be null, so check OVL_BASE_SCRATCH_DEV before
3302 # running shutdown to avoid shutting down base fs accidently.
3303 _notrun "This test requires a valid $OVL_BASE_SCRATCH_DEV as ovl base fs"
3305 $here/src/godown -f $OVL_BASE_SCRATCH_MNT 2>&1 \
3306 || _notrun "Underlying filesystem does not support shutdown"
3309 $here/src/godown -f $SCRATCH_MNT 2>&1 \
3310 || _notrun "$FSTYP does not support shutdown"
3321 local attributes=$($XFS_IO_PROG -c 'statx -r' $target | awk '/stat.attributes / { print $3 }')
3323 # The original attribute bit value, STATX_ATTR_DAX (0x2000), conflicted
3324 # with STATX_ATTR_MOUNT_ROOT. Therefore, STATX_ATTR_DAX was changed to
3327 # Because DAX tests do not run on root mounts, STATX_ATTR_MOUNT_ROOT
3328 # should always be 0. Check for the old flag and fail the test if that
3331 if [ $(( attributes & 0x2000 )) -ne 0 ]; then
3332 echo "$target has an unexpected STATX_ATTR_MOUNT_ROOT flag set"
3333 echo "which used to be STATX_ATTR_DAX"
3334 echo " This test should not be running on the root inode..."
3335 echo " Does the kernel have the following patch?"
3336 echo " 72d1249e2ffd uapi: fix statx attribute value overlap for DAX & MOUNT_ROOT"
3339 if [ $exp_s_dax -eq 0 ]; then
3340 (( attributes & 0x00200000 )) && echo "$target has unexpected S_DAX flag"
3342 (( attributes & 0x00200000 )) || echo "$target doesn't have expected S_DAX flag"
3351 if [ $exp_xflag -eq 0 ]; then
3352 _test_inode_flag dax $target && echo "$target has unexpected FS_XFLAG_DAX flag"
3354 _test_inode_flag dax $target || echo "$target doesn't have expected FS_XFLAG_DAX flag"
3358 # Check if dax mount options are supported
3360 # $1 can be either 'dax=always' or 'dax'
3363 # Check for the new dax options (dax=inode, dax=always or dax=never)
3364 # by passing "dax=always".
3366 # Check for the old dax or new dax=always by passing "dax".
3368 # This only accepts 'dax=always' because dax=always, dax=inode and
3369 # dax=never are always supported together. So if the other options are
3370 # required checking for 'dax=always' indicates support for the other 2.
3372 # Return 0 if filesystem/device supports the specified dax option.
3373 # Return 1 if mount fails with the specified dax option.
3374 # Return 2 if /proc/mounts shows wrong dax option.
3375 _check_scratch_dax_mountopt()
3380 _scratch_mkfs > /dev/null 2>&1
3382 _try_scratch_mount "-o $option" > /dev/null 2>&1 || return 1
3384 if _fs_options $SCRATCH_DEV | egrep -q "dax(=always|,|$)"; then
3393 # Throw notrun if _check_scratch_dax_mountopt() returns a non-zero value.
3394 _require_scratch_dax_mountopt()
3398 _check_scratch_dax_mountopt "$mountopt"
3401 [ $res -eq 1 ] && _notrun "mount $SCRATCH_DEV with $mountopt failed"
3402 [ $res -eq 2 ] && _notrun "$SCRATCH_DEV $FSTYP does not support -o $mountopt"
3405 _require_dax_iflag()
3407 _require_xfs_io_command "chattr" "x"
3410 # Does norecovery support by this fs?
3411 _require_norecovery()
3413 _try_scratch_mount -o ro,norecovery || \
3414 _notrun "$FSTYP does not support norecovery"
3418 # Does this filesystem support metadata journaling?
3419 # We exclude ones here that don't; otherwise we assume that it does, so the
3420 # test will run, fail, and motivate someone to update this test for a new
3423 # It's possible that TEST_DEV and SCRATCH_DEV have different features (it'd be
3424 # odd, but possible) so check $TEST_DEV by default, but we can optionall pass
3426 _has_metadata_journaling()
3435 ext2|vfat|msdos|udf|exfat)
3436 echo "$FSTYP does not support metadata journaling"
3440 # ext4 could be mkfs'd without a journal...
3442 $DUMPE2FS_PROG -h $dev 2>&1 | grep -q has_journal || {
3443 echo "$FSTYP on $dev not configured with metadata journaling"
3446 # ext4 might not load a journal
3447 if _normalize_mount_options | grep -qw "noload"; then
3448 echo "mount option \"noload\" not allowed in this test"
3453 # metadata journaling check is based on base filesystem configurations
3454 # and because -overlay option saves those configurations to OVL_BASE_*,
3455 # adding restore/override the configurations before/after the check.
3456 if [ ! -z $OVL_BASE_FSTYP -a $OVL_BASE_FSTYP != "overlay" ]; then
3459 _overlay_config_restore
3460 _has_metadata_journaling
3462 _overlay_config_override
3465 echo "No metadata journaling support for legacy overlay setup"
3470 # by default we pass; if you need to, add your fs above!
3476 _require_metadata_journaling()
3478 local msg=$(_has_metadata_journaling $@)
3479 if [ -n "$msg" ]; then
3486 $XFS_IO_PROG -r -c "fiemap" $1 | tail -n +2 | grep -v hole | wc -l
3489 # Similar to _count_extents() but if any extent is shared multiples times in
3490 # the file (reflinked to different file offsets), it is accounted as 1 extent
3491 # instead of N extents.
3492 _count_exclusive_extents()
3494 $XFS_IO_PROG -r -c "fiemap" $1 | tail -n +2 | grep -v hole | \
3495 cut -d ' ' -f 3 | sort | uniq | wc -l
3500 $XFS_IO_PROG -r -c "fiemap" $1 | tail -n +2 | grep hole | wc -l
3503 _count_attr_extents()
3505 $XFS_IO_PROG -c "fiemap -a" $1 | tail -n +2 | grep -v hole | wc -l
3508 # arg 1 is dev to remove and is output of the below eg.
3509 # ls -l /sys/class/block/sdd | rev | cut -d "/" -f 3 | rev
3515 echo 1 > /sys/class/scsi_device/${lun}/device/delete || _fail "Remove disk failed"
3517 stat $disk > /dev/null 2>&1
3518 while [ $? -eq 0 ]; do
3520 stat $disk > /dev/null 2>&1
3524 # arg 1 is dev to add and is output of the below eg.
3525 # ls -l /sys/class/block/sdd | rev | cut -d "/" -f 3 | rev
3530 # arg 1 will be in h:t:d:l format now in the h and "t d l" format
3531 h=`echo ${1} | cut -d":" -f 1`
3532 tdl=`echo ${1} | cut -d":" -f 2-|sed 's/:/ /g'`
3534 echo ${tdl} > /sys/class/scsi_host/host${h}/scan || _fail "Add disk failed"
3536 # ensure the device comes online
3537 local dev_back_oneline=0
3539 for i in `seq 1 10`; do
3540 if [ -d /sys/class/scsi_device/${1}/device/block ]; then
3541 local dev=`ls /sys/class/scsi_device/${1}/device/block`
3543 for j in `seq 1 10`;
3545 stat /dev/$dev > /dev/null 2>&1
3546 if [ $? -eq 0 ]; then
3557 if [ $dev_back_oneline -eq 0 ]; then
3558 echo "/dev/$dev online failed" >> $seqres.full
3560 echo "/dev/$dev is back online" >> $seqres.full
3566 if [ -z "$FSTRIM_PROG" ]; then
3567 _notrun "This test requires fstrim utility."
3571 _require_batched_discard()
3573 if [ $# -ne 1 ]; then
3574 echo "Usage: _require_batched_discard mnt_point" 1>&2
3578 $FSTRIM_PROG $1 > /dev/null 2>&1 || _notrun "FITRIM not supported on $1"
3583 if [ -z "$DUMPE2FS_PROG" ]; then
3584 _notrun "This test requires dumpe2fs utility."
3590 if [ ! -e /proc/self/uid_map ]; then
3591 _notrun "This test requires procfs uid_map support."
3593 if [ ! -e /proc/self/gid_map ]; then
3594 _notrun "This test requires procfs gid_map support."
3600 FSSUM_PROG=$here/src/fssum
3601 [ -x $FSSUM_PROG ] || _notrun "fssum not built"
3606 CLONER_PROG=$here/src/cloner
3607 [ -x $CLONER_PROG ] || \
3608 _notrun "cloner binary not present at $CLONER_PROG"
3611 # Normalize mount options from global $MOUNT_OPTIONS
3612 # Convert options like "-o opt1,opt2 -oopt3" to
3614 _normalize_mount_options()
3616 echo $MOUNT_OPTIONS | sed -n 's/-o\s*\(\S*\)/\1/gp'| sed 's/,/ /g'
3619 # skip test if MOUNT_OPTIONS contains the given strings
3620 # Both dax and dax=always are excluded if dax or dax=always is passed
3621 _exclude_scratch_mount_option()
3623 local mnt_opts=$(_normalize_mount_options)
3625 while [ $# -gt 0 ]; do
3627 echo "$pattern" | egrep -q "dax(=always|$)" && \
3628 pattern="dax(=always| |$)"
3629 if echo $mnt_opts | egrep -q "$pattern"; then
3630 _notrun "mount option \"$1\" not allowed in this test"
3638 _exclude_scratch_mount_option "noatime"
3641 _notrun "atime related mount options have no effect on $FSTYP"
3649 _scratch_mkfs > /dev/null 2>&1
3650 _try_scratch_mount -o relatime || \
3651 _notrun "relatime not supported by the current kernel"
3657 [ -x $here/src/nsexec ] || _notrun "src/nsexec executable not found"
3658 $here/src/nsexec -U true 2>/dev/null || _notrun "userns not supported by this kernel"
3661 _create_loop_device()
3664 dev=`losetup -f --show $file` || _fail "Cannot assign $file to a loop device"
3668 _destroy_loop_device()
3671 losetup -d $dev || _fail "Cannot destroy loop device $dev"
3674 _scale_fsstress_args()
3677 while [ $# -gt 0 ]; do
3679 -n) args="$args $1 $(($2 * $TIME_FACTOR))"; shift ;;
3680 -p) args="$args $1 $(($2 * $LOAD_FACTOR))"; shift ;;
3681 *) args="$args $1" ;;
3685 printf '%s\n' "$args"
3689 # Return the logical block size if running on a block device,
3690 # else substitute the page size.
3692 _min_dio_alignment()
3696 if [ -b "$dev" ]; then
3697 blockdev --getss $dev
3699 $here/src/feature -s
3705 echo "# $@" >> $seqres.full 2>&1
3706 "$@" >> $seqres.full 2>&1 || _fail "failed: '$@'"
3711 local target=`mktemp -p $TEST_DIR`
3712 local link=`mktemp -p $TEST_DIR -u`
3713 ln -s `basename $target` $link
3714 if [ "$?" -ne 0 ]; then
3716 _notrun "Require symlinks support"
3721 _require_hardlinks()
3723 local target=`mktemp -p $TEST_DIR`
3724 local link=`mktemp -p $TEST_DIR -u`
3726 if [ "$?" -ne 0 ]; then
3728 _notrun "No hardlink support"
3733 _require_test_fcntl_advisory_locks()
3735 [ "$FSTYP" != "cifs" ] && return 0
3736 cat /proc/mounts | grep $TEST_DEV | grep cifs | grep -q "nobrl" && return 0
3737 cat /proc/mounts | grep $TEST_DEV | grep cifs | grep -qE "nounix|forcemand" && \
3738 _notrun "Require fcntl advisory locks support"
3741 _require_test_fcntl_setlease()
3743 _require_test_program "locktest"
3744 touch $TEST_DIR/setlease_testfile
3745 $here/src/locktest -t $TEST_DIR/setlease_testfile >/dev/null 2>&1
3746 [ $? -eq 22 ] && _notrun "Require fcntl setlease support"
3749 _require_ofd_locks()
3751 # Give a test run by getlk wrlck on testfile.
3752 # If the running kernel does not support OFD locks,
3753 # EINVAL will be returned.
3754 _require_test_program "t_ofd_locks"
3755 touch $TEST_DIR/ofd_testfile
3756 $here/src/t_ofd_locks -t $TEST_DIR/ofd_testfile > /dev/null 2>&1
3757 [ $? -eq 22 ] && _notrun "Require OFD locks support"
3760 _require_test_lsattr()
3762 local testio=$(lsattr -d $TEST_DIR 2>&1)
3763 echo $testio | grep -q "Operation not supported" && \
3764 _notrun "lsattr not supported by test filesystem type: $FSTYP"
3765 echo $testio | grep -q "Inappropriate ioctl for device" && \
3766 _notrun "lsattr not supported by test filesystem type: $FSTYP"
3771 if [ -z "$1" ]; then
3772 echo "Usage: _require_chattr <attr>"
3777 touch $TEST_DIR/syscalltest
3778 chattr "+$attribute" $TEST_DIR/syscalltest > $TEST_DIR/syscalltest.out 2>&1
3780 chattr "-$attribute" $TEST_DIR/syscalltest > $TEST_DIR/syscalltest.out 2>&1
3781 if [ "$ret" -ne 0 ]; then
3782 _notrun "file system doesn't support chattr +$attribute"
3784 cat $TEST_DIR/syscalltest.out >> $seqres.full
3785 rm -f $TEST_DIR/syscalltest.out
3790 if [ -z "$1" ]; then
3791 echo "Usage: _get_total_inode <mnt>"
3795 nr_inode=`$DF_PROG -i $1 | tail -1 | awk '{print $3}'`
3801 if [ -z "$1" ]; then
3802 echo "Usage: _get_used_inode <mnt>"
3806 nr_inode=`$DF_PROG -i $1 | tail -1 | awk '{print $4}'`
3810 _get_used_inode_percent()
3812 if [ -z "$1" ]; then
3813 echo "Usage: _get_used_inode_percent <mnt>"
3817 pct_inode=`$DF_PROG -i $1 | tail -1 | awk '{ print $6 }' | \
3824 if [ -z "$1" ]; then
3825 echo "Usage: _get_free_inode <mnt>"
3829 nr_inode=`$DF_PROG -i $1 | tail -1 | awk '{print $5}'`
3833 # get the available space in bytes
3835 _get_available_space()
3837 if [ -z "$1" ]; then
3838 echo "Usage: _get_available_space <mnt>"
3842 avail_kb=`$DF_PROG $1 | tail -n1 | awk '{ print $5 }'`
3843 echo $((avail_kb * 1024))
3846 # return device size in kb
3849 echo $(($(blockdev --getsz $1) >> 1))
3852 # Make sure we actually have dmesg checking set up.
3853 _require_check_dmesg()
3855 test -w /dev/kmsg || \
3856 _notrun "Test requires writable /dev/kmsg."
3859 # Return the dmesg log since the start of this test. Caller must ensure that
3860 # /dev/kmsg was writable when the test was started so that we can find the
3861 # beginning of this test's log messages; _require_check_dmesg does this.
3862 _dmesg_since_test_start()
3864 # search the dmesg log of last run of $seqnum for possible failures
3865 # use sed \cregexpc address type, since $seqnum contains "/"
3866 dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | \
3870 # check dmesg log for a specific string, subject to the same requirements as
3871 # _dmesg_since_test_start.
3874 _dmesg_since_test_start | egrep -q "$1"
3877 # Default filter for dmesg scanning.
3878 # Ignore lockdep complaining about its own bugginess when scanning dmesg
3879 # output, because we shouldn't be failing filesystem tests on account of
3881 _check_dmesg_filter()
3883 egrep -v -e "BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low" \
3884 -e "BUG: MAX_STACK_TRACE_ENTRIES too low"
3887 # check dmesg log for WARNING/Oops/etc.
3890 if [ ! -f ${RESULT_DIR}/check_dmesg ]; then
3893 rm -f ${RESULT_DIR}/check_dmesg
3895 # default filter is a simple cat command, caller could provide a
3896 # customized filter and pass the name through the first argument, to
3897 # filter out intentional WARNINGs or Oopses
3898 local filter=${1:-_check_dmesg_filter}
3900 _dmesg_since_test_start | $filter >$seqres.dmesg
3901 egrep -q -e "kernel BUG at" \
3905 -e "possible recursive locking detected" \
3906 -e "Internal error" \
3907 -e "(INFO|ERR): suspicious RCU usage" \
3908 -e "INFO: possible circular locking dependency detected" \
3909 -e "general protection fault:" \
3910 -e "BUG .* remaining" \
3913 if [ $? -eq 0 ]; then
3914 _dump_err "_check_dmesg: something found in dmesg (see $seqres.dmesg)"
3917 if [ "$KEEP_DMESG" != "yes" ]; then
3924 # capture the kmemleak report
3927 local kern_knob="$DEBUGFS_MNT/kmemleak"
3928 local leak_file="$1"
3930 # Tell the kernel to scan for memory leaks. Apparently the write
3931 # returns before the scan is complete, so do it twice in the hopes
3932 # that twice is enough to capture all the leaks.
3933 echo "scan" > "$kern_knob"
3934 cat "$kern_knob" > /dev/null
3935 echo "scan" > "$kern_knob"
3936 cat "$kern_knob" > "$leak_file.tmp"
3937 if [ -s "$leak_file.tmp" ]; then
3938 cat > "$leak_file" << ENDL
3939 EXPERIMENTAL kmemleak reported some memory leaks! Due to the way kmemleak
3940 works, the leak might be from an earlier test, or something totally unrelated.
3942 cat "$leak_file.tmp" >> "$leak_file"
3944 rm -rf "$leak_file.tmp"
3945 echo "clear" > "$kern_knob"
3948 # Figure out if the running kernel supports kmemleak; if it does, clear out
3949 # anything that leaked before we even started testing. The leak checker only
3950 # needs to be primed like this once per ./check invocation.
3953 local kern_knob="$DEBUGFS_MNT/kmemleak"
3954 KMEMLEAK_CHECK_FILE="/tmp/check_kmemleak"
3956 # Since kernel v4.19-rc3, the kmemleak knob exists even if kmemleak is
3957 # disabled, but returns EBUSY on write. So instead of relying on
3958 # existance of writable knob file, we use a test file to indicate that
3959 # _check_kmemleak() is enabled only if we actually managed to write to
3961 rm -f "$KMEMLEAK_CHECK_FILE"
3963 if [ ! -w "$kern_knob" ]; then
3967 # Disable the automatic scan so that we can control it completely,
3968 # then dump all the leaks recorded so far.
3969 if echo "scan=off" > "$kern_knob" 2>/dev/null; then
3970 _capture_kmemleak /dev/null
3971 touch "$KMEMLEAK_CHECK_FILE"
3975 # Kick the kmemleak checker to scan for leaks. Background leak scan mode is
3976 # not enabled, so we must call the kernel to ask for a scan and deal with the
3977 # results appropriately. This we do after every test completes, whether or not
3978 # it was successful.
3981 local kern_knob="$DEBUGFS_MNT/kmemleak"
3982 local leak_file="$seqres.kmemleak"
3984 if [ ! -f "$KMEMLEAK_CHECK_FILE" ]; then
3988 # Not enabled, so discard any report of leaks found.
3989 if [ "$USE_KMEMLEAK" != "yes" ]; then
3990 _capture_kmemleak /dev/null
3994 # Capture and report any leaks
3995 _capture_kmemleak "$leak_file"
3996 if [ -s "$leak_file" ]; then
3997 _dump_err "_check_kmemleak: something found in kmemleak (see $leak_file)"
4005 # don't check dmesg log after test
4006 _disable_dmesg_check()
4008 rm -f ${RESULT_DIR}/check_dmesg
4013 # make some further configuration checks here
4014 if [ "$TEST_DEV" = "" ]
4016 echo "common/rc: Error: \$TEST_DEV is not set"
4020 # if $TEST_DEV is not mounted, mount it now as XFS
4021 if [ -z "`_fs_type $TEST_DEV`" ]
4023 # $TEST_DEV is not mounted
4026 echo "common/rc: retrying test device mount with external set"
4027 [ "$USE_EXTERNAL" != "yes" ] && export USE_EXTERNAL=yes
4030 echo "common/rc: could not mount $TEST_DEV on $TEST_DIR"
4036 # Sanity check that TEST partition is not mounted at another mount point
4037 # or as another fs type
4038 _check_mounted_on TEST_DEV $TEST_DEV TEST_DIR $TEST_DIR $FSTYP || exit 1
4039 if [ -n "$SCRATCH_DEV" ]; then
4040 # Sanity check that SCRATCH partition is not mounted at another
4041 # mount point, because it is about to be unmounted and formatted.
4042 # Another fs type for scratch is fine (bye bye old fs type).
4043 _check_mounted_on SCRATCH_DEV $SCRATCH_DEV SCRATCH_MNT $SCRATCH_MNT
4044 [ $? -le 1 ] || exit 1
4047 # Figure out if we need to add -F ("foreign", deprecated) option to xfs_io
4048 $XFS_IO_PROG -c stat $TEST_DIR 2>&1 | grep -q "is not on an XFS filesystem" && \
4049 export XFS_IO_PROG="$XFS_IO_PROG -F"
4051 # xfs_io -i option starts an idle thread for xfs_io.
4052 # With single threaded process, the file table is not shared
4053 # and file structs are not reference counted.
4054 # Spawning an idle thread can help detecting file struct
4055 # reference leaks, so we want to enable the option whenever
4057 $XFS_IO_PROG -i -c quit 2>/dev/null && \
4058 export XFS_IO_PROG="$XFS_IO_PROG -i"
4060 # xfs_copy on v5 filesystems do not require the "-d" option if xfs_db
4061 # can change the UUID on v5 filesystems
4062 if [ "$FSTYP" == "xfs" ]; then
4064 $MKFS_XFS_PROG -d file,name=/tmp/$$.img,size=512m >/dev/null 2>&1
4065 # xfs_db will return 0 even if it can't generate a new uuid, so
4066 # check the output to make sure if it can change UUID of V5 xfs
4067 $XFS_DB_PROG -x -c "uuid generate" /tmp/$$.img \
4068 | grep -q "invalid UUID\|supported on V5 fs" \
4069 && export XFS_COPY_PROG="$XFS_COPY_PROG -d"
4074 # get real device path name by following link
4078 if [ -b "$dev" ] && [ -L "$dev" ]; then
4079 dev=`readlink -f "$dev"`
4084 # basename of a device
4087 echo `basename $(_real_dev $1)`
4092 local dev=`_real_dev $1`
4093 local maj=$(stat -c%t $dev | tr [:lower:] [:upper:])
4094 local min=$(stat -c%T $dev | tr [:lower:] [:upper:])
4095 maj=$(echo "ibase=16; $maj" | bc)
4096 min=$(echo "ibase=16; $min" | bc)
4097 echo /sys/dev/block/$maj:$min
4100 # Get the minimum block size of a file. Usually this is the
4101 # minimum fs block size, but some filesystems (ocfs2) do block
4102 # mappings in larger units.
4103 _get_file_block_size()
4105 if [ -z $1 ] || [ ! -d $1 ]; then
4106 echo "Missing mount point argument for _get_file_block_size"
4115 _xfs_get_file_block_size $1
4123 # Get the minimum block size of an fs.
4126 if [ -z $1 ] || [ ! -d $1 ]; then
4127 echo "Missing mount point argument for _get_block_size"
4135 echo $(getconf PAGE_SIZE)
4142 local args=`echo $@ | sed -e "s/ BSIZE / $bsize /g" -e "s/ PSIZE / $psize /g"`
4143 set -- $here/ltp/fsx $args $FSX_AVOID $TEST_DIR/junk
4144 echo "$@" >>$seqres.full
4145 rm -f $TEST_DIR/junk
4146 "$@" 2>&1 | tee -a $seqres.full >$tmp.fsx
4147 if [ ${PIPESTATUS[0]} -ne 0 ]; then
4155 # Test for the existence of a sysfs entry at /sys/fs/$FSTYP/DEV/$ATTR
4157 # Only one argument is needed:
4158 # - attr: path name under /sys/fs/$FSTYP/DEV
4161 # _require_fs_sysfs error/fail_at_unmount
4165 local dname=$(_short_dev $TEST_DEV)
4167 if [ -z "$attr" -o -z "$dname" ];then
4168 _fail "Usage: _require_fs_sysfs <sysfs_attr_path>"
4171 if [ ! -e /sys/fs/${FSTYP}/${dname}/${attr} ];then
4172 _notrun "This test requires /sys/fs/${FSTYP}/${dname}/${attr}"
4178 $here/src/stat_test --check-statx ||
4179 _notrun "This test requires the statx system call"
4182 # Write "content" into /sys/fs/$FSTYP/$DEV/$ATTR
4184 # All arguments are necessary, and in this order:
4185 # - dev: device name, e.g. $SCRATCH_DEV
4186 # - attr: path name under /sys/fs/$FSTYP/$dev
4187 # - content: the content of $attr
4190 # _set_fs_sysfs_attr /dev/mapper/scratch-dev error/fail_at_unmount 0
4191 _set_fs_sysfs_attr()
4199 if [ ! -b "$dev" -o -z "$attr" -o -z "$content" ];then
4200 _fail "Usage: _set_fs_sysfs_attr <mounted_device> <attr> <content>"
4203 local dname=$(_short_dev $dev)
4204 echo "$content" > /sys/fs/${FSTYP}/${dname}/${attr}
4207 # Print the content of /sys/fs/$FSTYP/$DEV/$ATTR
4209 # All arguments are necessary, and in this order:
4210 # - dev: device name, e.g. $SCRATCH_DEV
4211 # - attr: path name under /sys/fs/$FSTYP/$dev
4214 # _get_fs_sysfs_attr /dev/mapper/scratch-dev error/fail_at_unmount
4215 _get_fs_sysfs_attr()
4220 if [ ! -b "$dev" -o -z "$attr" ];then
4221 _fail "Usage: _get_fs_sysfs_attr <mounted_device> <attr>"
4224 local dname=$(_short_dev $dev)
4225 cat /sys/fs/${FSTYP}/${dname}/${attr}
4228 # Generic test for specific filesystem feature.
4229 # Currently only implemented to test overlayfs features.
4230 _require_scratch_feature()
4236 _require_scratch_overlay_features ${feature}
4239 _fail "Test for feature '${feature}' of ${FSTYP} is not implemented"
4244 # Get the maximum size of a file in $TEST_DIR (s_maxbytes). On ext4 this will
4245 # be UINT32_MAX * block_size, but other filesystems may allow up to LLONG_MAX.
4246 _get_max_file_size()
4248 local testfile=$TEST_DIR/maxfilesize.$seq
4250 local r=9223372036854775807 # LLONG_MAX
4253 while (( l < r )); do
4254 # Use _math() to avoid signed integer overflow.
4255 local m=$(_math "($l + $r + 1) / 2")
4256 if $XFS_IO_PROG -f -c "truncate $m" $testfile \
4257 |& grep -q 'File too large'
4267 # get MAX_LFS_FILESIZE
4268 _get_max_lfs_filesize()
4270 case "$(getconf LONG_BIT)" in
4272 local ulong_max=$(getconf ULONG_MAX)
4273 local page_size=$(getconf PAGE_SIZE)
4274 echo $(( ulong_max * page_size ))
4277 echo 9223372036854775807
4280 _fail "sizeof(long) == $(getconf LONG_BIT)?"
4285 # The maximum filesystem label length, /not/ including terminating NULL
4299 _notrun "$FSTYP does not define maximum label length"
4304 # Helper to check above early in a script
4305 _require_label_get_max()
4307 # Just call _label_get_max which will notrun if appropriate
4308 dummy=$(_label_get_max)
4313 $UDEV_SETTLE_PROG >/dev/null 2>&1
4314 $DMSETUP_PROG remove "$@" >>$seqres.full 2>&1
4315 $DMSETUP_PROG mknodes >/dev/null 2>&1
4320 $DMSETUP_PROG create "$@" >>$seqres.full 2>&1 || return 1
4321 $DMSETUP_PROG mknodes >/dev/null 2>&1
4322 $UDEV_SETTLE_PROG >/dev/null 2>&1
4327 # Note: filesystems are not required to report btime (creation time)
4328 # if the caller doesn't ask for it, so we define STATX_BTIME here and
4329 # pass it in to the statx command.
4330 export STATX_BTIME=0x800
4331 $XFS_IO_PROG -f $TEST_DIR/test_creation_time -c "statx -m $STATX_BTIME -v" \
4332 | grep btime >>$seqres.full 2>&1 || \
4333 _notrun "inode creation time not supported by this filesystem"
4334 rm -f $TEST_DIR/test_creation_time
4337 _require_scratch_btime()
4340 _scratch_mkfs > /dev/null 2>&1
4343 # Note: filesystems are not required to report btime (creation time)
4344 # if the caller doesn't ask for it, so we define STATX_BTIME here and
4345 # pass it in to the statx command.
4346 export STATX_BTIME=0x800
4347 $XFS_IO_PROG -f $SCRATCH_MNT/test_creation_time -c "statx -m $STATX_BTIME -v" \
4348 | grep btime >>$seqres.full 2>&1 || \
4349 _notrun "inode creation time not supported by this filesystem"
4354 _require_inode_limits()
4356 if [ $(_get_free_inode $TEST_DIR) -eq 0 ]; then
4357 _notrun "$FSTYP does not have a fixed number of inodes available"
4361 _require_filefrag_options()
4363 _require_command "$FILEFRAG_PROG" filefrag
4366 local file="$TEST_DIR/options_testfile"
4369 ${FILEFRAG_PROG} -$options $file 2>&1 | grep -q "invalid option" && \
4370 _notrun "filefrag doesn't support $options option"
4376 _require_filefrag_options "B"
4378 local file="$TEST_DIR/fibmap_testfile"
4381 ${FILEFRAG_PROG} -B $file 2>&1 | grep -q "FIBMAP[[:space:]]*unsupported"
4382 if [ $? -eq 0 ]; then
4383 _notrun "FIBMAP not supported by this filesystem"
4388 _try_wipe_scratch_devs()
4390 test -x "$WIPEFS_PROG" || return 0
4392 # Do specified filesystem wipe at first
4395 _try_wipe_scratch_xfs
4399 # Then do wipefs on all scratch devices
4400 for dev in $SCRATCH_DEV_POOL $SCRATCH_DEV $SCRATCH_LOGDEV $SCRATCH_RTDEV; do
4401 test -b $dev && $WIPEFS_PROG -a $dev
4405 # Only run this on xfs if xfs_scrub is available and has the unicode checker
4406 _check_xfs_scrub_does_unicode() {
4407 [ "${FSTYP}" == "xfs" ] || return 1
4412 _supports_xfs_scrub "${mount}" "${dev}" || return 1
4414 # We only care if xfs_scrub has unicode string support...
4415 if ! type ldd > /dev/null 2>&1 || \
4416 ! ldd "${XFS_SCRUB_PROG}" | grep -q libicui18n; then
4423 # exfat timestamps start at 1980 and cannot be prior to epoch
4424 _require_negative_timestamps() {
4427 _notrun "$FSTYP does not support negative timestamps"
4432 # Require the 'accton' userspace tool and CONFIG_BSD_PROCESS_ACCT=y.
4433 _require_bsd_process_accounting()
4435 _require_command "$ACCTON_PROG" accton
4436 $ACCTON_PROG on &> $tmp.test_accton
4437 cat $tmp.test_accton >> $seqres.full
4438 if grep 'Function not implemented' $tmp.test_accton; then
4439 _notrun "BSD process accounting support unavailable"
4441 $ACCTON_PROG off >> $seqres.full
4444 _require_sysctl_variable()
4447 sysctl $name &>/dev/null || _notrun "$name sysctl unavailable"
4452 mknod $TEST_DIR/$seq.null c 1 3 \
4453 || _notrun "$FSTYP does not support mknod/mkfifo"
4454 rm -f $TEST_DIR/$seq.null
4459 $GETCAP_PROG "$@" | _filter_getcap
4460 return ${PIPESTATUS[0]}
4465 ################################################################################
4466 # make sure this script returns success