+_______________________
+BUILDING THE FSQA SUITE
+_______________________
+
+Building Linux:
+ - cd into the xfstests directory
+ - install prerequisite packages
+ For example, for Ubuntu:
+ sudo apt-get install xfslibs-dev uuid-dev libtool-bin \
+ e2fsprogs automake gcc libuuid1 quota attr libattr1-dev make \
+ libacl1-dev libaio-dev xfsprogs libgdbm-dev gawk fio dbench \
+ uuid-runtime
+ For Fedora, RHEL, or CentOS:
+ yum install acl attr automake bc dbench dump e2fsprogs fio \
+ gawk gcc indent libtool lvm2 make psmisc quota sed \
+ xfsdump xfsprogs \
+ libacl-devel libattr-devel libaio-devel libuuid-devel \
+ xfsprogs-devel btrfs-progs-devel
+ (Older distributions may require xfsprogs-qa-devel as well.)
+ (Note that for RHEL and CentOS, you may need the EPEL repo.)
+ - run make
+ - run make install
+ - create fsgqa test user ("sudo useradd fsgqa")
+ - create 123456-fsgqa test user ("sudo useradd 123456-fsgqa")
+
+Building IRIX:
+ - cd into the xfstests directory
+ - set the ROOT and TOOLROOT env variables for IRIX appropriately
+ - run ./make_irix
+
______________________
-USING THE XFS QA SUITE
+USING THE FSQA SUITE
______________________
-Preparing system for tests:
+Preparing system for tests (IRIX and Linux):
- compile XFS into your kernel or load XFS modules
- - install user tools including mkfs.xfs, xfs_db & xfs_bmap
+ - install administrative tools specific to the filesystem you wish to test
+ - If you wish to run the udf components of the suite install
+ mkfs_udf and udf_db for IRIX and mkudffs for Linux. Also download and
+ build the Philips UDF Verification Software from
+ http://www.extra.research.philips.com/udf/, then copy the udf_test
+ binary to xfstests/src/. If you wish to disable UDF verification test
+ set the environment variable DISABLE_UDF_TEST to 1.
+
- - create two partitions to use for testing
+ - create one or two partitions to use for testing
- one TEST partition
- format as XFS, mount & optionally populate with
NON-IMPORTANT stuff
- - one SCRATCH partition
+ - one SCRATCH partition (optional)
- leave empty and expect this partition to be clobbered
- by some tests.
-
- (these must be two DIFFERENT partitions)
+ by some tests. If this is not provided, many tests will
+ not be run.
+ (SCRATCH and TEST must be two DIFFERENT partitions)
+ OR
+ - for btrfs only: some btrfs test cases will need 3 or more independent
+ SCRATCH disks which should be set using SCRATCH_DEV_POOL (for eg:
+ SCRATCH_DEV_POOL="/dev/sda /dev/sdb /dev/sdc") with which
+ SCRATCH_DEV should be unused by the tester, and for the legacy
+ support SCRATCH_DEV will be set to the first disk of the
+ SCRATCH_DEV_POOL by xfstests script.
- setup your environment
+ Quick start:
+ - copy local.config.example to local.config and edit as needed
+ Or:
- setenv TEST_DEV "device containing TEST PARTITION"
- setenv TEST_DIR "mount point of TEST PARTITION"
- - setenv SCRATCH_DEV "device containing SCRATCH PARTITION"
- - setenv SCRATCH_MNT "mount point for SCRATCH PARTITION"
- - setenv TAPE_DEV "tape device for testing xfsdump"
- - setenv RMT_TAPE_DEV "remote tape device for testing xfsdump"
- - setenv RMT_IRIXTAPE_DEV "remote IRIX tape device for testing xfsdump"
- optionally:
+ - setenv SCRATCH_DEV "device containing SCRATCH PARTITION" OR
+ (btrfs only) setenv SCRATCH_DEV_POOL "to 3 or more SCRATCH disks for
+ testing btrfs raid concepts"
+ - setenv SCRATCH_MNT "mount point for SCRATCH PARTITION"
+ - setenv TAPE_DEV "tape device for testing xfsdump"
+ - setenv RMT_TAPE_DEV "remote tape device for testing xfsdump"
+ - setenv RMT_IRIXTAPE_DEV "remote IRIX tape device for testing xfsdump"
- setenv SCRATCH_LOGDEV "device for scratch-fs external log"
- setenv SCRATCH_RTDEV "device for scratch-fs realtime data"
- setenv TEST_LOGDEV "device for test-fs external log"
- if TEST_LOGDEV and/or TEST_RTDEV, these will always be used.
- if SCRATCH_LOGDEV and/or SCRATCH_RTDEV, the USE_EXTERNAL
environment variable set to "yes" will enable their use.
- - or add a case to the switch in common.config assigning
+ - setenv DIFF_LENGTH "number of diff lines to print from a failed test",
+ by default 10, set to 0 to print the full diff
+ - setenv FSTYP "the filesystem you want to test", the filesystem
+ type is devised from the TEST_DEV device, but you may want to
+ override it; if unset, the default is 'xfs'
+ - setenv FSSTRESS_AVOID and/or FSX_AVOID, which contain options
+ added to the end of fsstresss and fsx invocations, respectively,
+ in case you wish to exclude certain operational modes from these
+ tests.
+ - set TEST_XFS_REPAIR_REBUILD=1 to have _check_xfs_filesystem
+ run xfs_repair -n to check the filesystem; xfs_repair to rebuild
+ metadata indexes; and xfs_repair -n (a third time) to check the
+ results of the rebuilding.
+ - set TEST_XFS_SCRUB=1 to have _check_xfs_filesystem run
+ xfs_scrub -vd to scrub the filesystem metadata online before
+ unmounting to run the offline check.
+
+ - or add a case to the switch in common/config assigning
these variables based on the hostname of your test
machine
+ - or add these variables to a file called local.config and keep that
+ file in your workarea.
- if testing xfsdump, make sure the tape devices have a
tape which can be overwritten.
- make sure $TEST_DEV is a mounted XFS partition
- - make sure that $SCRATCH_DEV contains nothing useful
+ - make sure that $SCRATCH_DEV or $SCRATCH_DEV_POOL contains nothing useful
Running tests:
- cd xfstests
- - ./check 001 002 003 ...
+ - By default the tests suite will run xfs tests:
+ - ./check '*/001' '*/002' '*/003'
+ - ./check '*/06?'
+ - Groups of tests maybe ran by: ./check -g [group(s)]
+ See the 'group' file for details on groups
+ - To randomize test order: ./check -r [test(s)]
+ - You can explicitly specify NFS/CIFS/OVERLAY, otherwise
+ the filesystem type will be autodetected from $TEST_DEV:
+ - for running nfs tests: ./check -nfs [test(s)]
+ - for running cifs/smb3 tests: ./check -cifs [test(s)]
+ - for overlay tests: ./check -overlay [test(s)]
+ The TEST and SCRATCH partitions should be pre-formatted
+ with another base fs, where the overlay dirs will be created
+
The check script tests the return value of each script, and
compares the output against the expected output. If the output
will be produced for the failing test.
Unexpected console messages, crashes and hangs may be considered
- to be failures but are not necesarily detected by the QA system.
+ to be failures but are not necessarily detected by the QA system.
__________________________
-ADDING TO THE XFS QA SUITE
+ADDING TO THE FSQA SUITE
__________________________
When developing a new test script keep the following things in
mind. All of the environment variables and shell procedures are
- available to the script once the "common.rc" file has been
+ available to the script once the "common/rc" file has been
sourced.
1. The tests are run from an arbitrary directory. If you want to
writeable. You should cleanup when your test is done,
e.g. use a _cleanup shell procedure in the trap ... see
001 for an example. If you need to know, the $TEST_DIR
- direcotry is within the filesystem on the block device
+ directory is within the filesystem on the block device
$TEST_DEV.
(b) mkfs a new XFS filesystem on $SCRATCH_DEV, and mount this
3. By default, tests are run as the same uid as the person
executing the control script "check" that runs the test scripts.
- If you need to be root, add a call to the shell procedure
- _need_to_be_root ... this will do nothing or exit with an
- error message depending on your current uid.
-
4. Some other useful shell procedures:
_get_fqdn - echo the host's fully qualified
_within_tolerance - fancy numerical "close enough is good
enough" filter for deterministic
output ... see comments in
- common.filter for an explanation
+ common/filter for an explanation
_filter_date - turn ctime(3) format dates into the
string DATE for deterministic
output
+ _cat_passwd, - dump the content of the password
+ _cat_group or group file (both the local file
+ and the content of the NIS database
+ if it is likely to be present)
+
+ 5. General recommendations, usage conventions, etc.:
+ - When the content of the password or group file is
+ required, get it using the _cat_passwd and _cat_group
+ functions, to ensure NIS information is included if NIS
+ is active.
+ - When calling getfacl in a test, pass the "-n" argument so
+ that numeric rather than symbolic identifiers are used in
+ the output.
+ - When creating a new test, it is possible to enter a custom name
+ for the file. Filenames are in form NNN-custom-name, where NNN
+ is automatically added by the ./new script as an unique ID,
+ and "custom-name" is the optional string entered into a prompt
+ in the ./new script. It can contain only alphanumeric characters
+ and dash. Note the "NNN-" part is added automatically.
+
Verified output:
- Each test script has a numerical name, e.g. 007, and an associated
+ Each test script has a name, e.g. 007, and an associated
verified output, e.g. 007.out.
It is important that the verified output is deterministic, and
- variable directory contents
- imprecise numbers, especially sizes and times
- Use the "remake" script to recreate the verified output for one
- or more tests.
-
Pass/failure:
The script "check" may be used to run one or more tests.
Note that:
exit 1
- won't have the desired effect becuase of the way the exit trap
+ won't have the desired effect because of the way the exit trap
works.
The recent pass/fail history is maintained in the file "check.log".
The elapsed time for the most recent pass for each test is kept
in "check.time".
+
+ The compare-failures script in tools/ may be used to compare failures
+ across multiple runs, given files containing stdout from those runs.
+
+__________________
+SUBMITTING PATCHES
+__________________
+
+Send patches to the fstests mailing list at fstests@vger.kernel.org.