export here=`pwd`
xfile=""
+DUMP_OUTPUT=false
+
# start the initialisation work now
iam=check
rm -f $tmp.list $tmp.tmp $tmp.grep $here/$iam.out $tmp.xlist
-# we need common/config
-if ! . ./common/config
-then
- echo "$iam: failed to source common/config"
- exit 1
-fi
-
-SUPPORTED_TESTS="[0-9][0-9][0-9] [0-9][0-9][0-9][0-9]"
SRC_GROUPS="generic shared"
export SRC_DIR="tests"
check options
-nfs test NFS
-cifs test CIFS
+ -overlay test overlay
-tmpfs test TMPFS
-l line mode diff
-udiff show unified diff (default)
-n show me, do not run tests
-T output timestamps
-r randomize test order
+ -d dump test output to stdout
--large-fs optimise scratch device for large filesystems
-s section run only specified section from config file
+ -S section exclude the specified section from the config file
testlist options
-g group[,group...] include tests from these groups
grp=$1
for d in $SRC_GROUPS $FSTYP; do
+ if ! test -d "$SRC_DIR/$d" ; then
+ continue
+ fi
l=$(sed -n < $SRC_DIR/$d/group \
-e 's/#.*//' \
-e 's/$/ /' \
- -e "s;\(^[0-9][0-9][0-9]\).* $grp .*;$SRC_DIR/$d/\1;p")
+ -e "s;^\($VALID_TEST_NAME\).* $grp .*;$SRC_DIR/$d/\1;p")
grpl="$grpl $l"
done
echo $grpl
}
-# find all tests, excluding files that are test metadata such as group files.
-# This assumes that tests are defined purely by alphanumeric filenames with no
-# ".xyz" extensions in the name.
+# Find all tests, excluding files that are test metadata such as group files.
+# It matches test names against $VALID_TEST_NAME defined in common/rc
get_all_tests()
{
touch $tmp.list
for d in $SRC_GROUPS $FSTYP; do
+ if ! test -d "$SRC_DIR/$d" ; then
+ continue
+ fi
ls $SRC_DIR/$d/* | \
grep -v "\..*" | \
+ grep "^$SRC_DIR/$d/$VALID_TEST_NAME"| \
grep -v "group\|Makefile" >> $tmp.list 2>/dev/null
done
}
case "$1" in
-\? | -h | --help) usage ;;
- -nfs) FSTYP=nfs ;;
- -cifs) FSTYP=cifs ;;
- -tmpfs) FSTYP=tmpfs ;;
+ -nfs) FSTYP=nfs ;;
+ -cifs) FSTYP=cifs ;;
+ -overlay) FSTYP=overlay ;;
+ -tmpfs) FSTYP=tmpfs ;;
-g) group=$2 ; shift ;
- GROUP_LIST="$GROUP_LIST $group"
+ GROUP_LIST="$GROUP_LIST ${group//,/ }"
;;
-x) xgroup=$2 ; shift ;
- XGROUP_LIST="$XGROUP_LIST $xgroup"
+ XGROUP_LIST="$XGROUP_LIST ${xgroup//,/ }"
;;
-X) xfile=$2; shift ;
fi
;;
-s) RUN_SECTION="$RUN_SECTION $2"; shift ;;
+ -S) EXCLUDE_SECTION="$EXCLUDE_SECTION $2"; shift ;;
-l) diff="diff" ;;
-udiff) diff="$diff -u" ;;
-r) randomize=true ;;
-T) timestamp=true ;;
+ -d) DUMP_OUTPUT=true ;;
--large-fs) export LARGE_SCRATCH_DEV=yes ;;
--extra-space=*) export SCRATCH_DEV_EMPTY_SPACE=${r#*=} ;;
shift
done
+# we need common/config, source it after processing args, overlay needs FSTYP
+# set before sourcing common/config
+if ! . ./common/config; then
+ echo "$iam: failed to source common/config"
+ exit 1
+fi
+
# Process tests from command line now.
if $have_test_arg; then
while [ $# -gt 0 ]; do
case "$1" in
- -*) echo "Argments before tests, please!"
+ -*) echo "Arguments before tests, please!"
status=1
exit $status
;;
fi
}
-_check_dmesg()
-{
- if [ ! -f ${RESULT_DIR}/check_dmesg ]; then
- return
- fi
- rm -f ${RESULT_DIR}/check_dmesg
-
- # search the dmesg log of last run of $seqnum for possible failures
- # use sed \cregexpc address type, since $seqnum contains "/"
- dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | \
- tac >$seqres.dmesg
- grep -q -e "kernel BUG at" \
- -e "WARNING:" \
- -e "BUG:" \
- -e "Oops:" \
- -e "possible recursive locking detected" \
- $seqres.dmesg
- if [ $? -eq 0 ]; then
- echo "_check_dmesg: something found in dmesg (see $seqres.dmesg)"
- err=true
- else
- rm -f $seqres.dmesg
- fi
-}
-
-
_prepare_test_list
if $OPTIONS_HAVE_SECTIONS; then
for s in $RUN_SECTION; do
if [ $section == $s ]; then
skip=false
+ break;
+ fi
+ done
+ if $skip; then
+ continue
+ fi
+ fi
+
+ # Did this section get excluded?
+ if [ ! -z "$EXCLUDE_SECTION" ]; then
+ skip=false
+ for s in $EXCLUDE_SECTION; do
+ if [ $section == $s ]; then
+ skip=true
+ break;
fi
done
if $skip; then
mkdir -p $RESULT_BASE
if [ ! -d $RESULT_BASE ]; then
echo "failed to create results directory $RESULT_BASE"
- exit 1;
+ status=1
+ exit
fi
if $OPTIONS_HAVE_SECTIONS; then
if $RECREATE_TEST_DEV || [ "$OLD_FSTYP" != "$FSTYP" ]; then
echo "RECREATING -- $FSTYP on $TEST_DEV"
- umount $TEST_DEV 2> /dev/null
+ _test_unmount 2> /dev/null
if ! _test_mkfs >$tmp.err 2>&1
then
echo "our local _test_mkfs routine ..."
cat $tmp.err
echo "check: failed to mkfs \$TEST_DEV using specified options"
- exit 1
+ status=1
+ exit
fi
out=`_mount_or_remount_rw "$MOUNT_OPTIONS" $TEST_DEV $TEST_DIR`
if [ $? -ne 1 ]; then
echo $out
- exit 1
+ status=1
+ exit
fi
_prepare_test_list
elif [ "$OLD_MOUNT_OPTIONS" != "$MOUNT_OPTIONS" ]; then
- umount $TEST_DEV 2> /dev/null
+ _test_unmount 2> /dev/null
out=`_mount_or_remount_rw "$MOUNT_OPTIONS" $TEST_DEV $TEST_DIR`
if [ $? -ne 1 ]; then
echo $out
- exit 1
+ status=1
+ exit
fi
fi
needwrap=true
if [ ! -z "$SCRATCH_DEV" ]; then
- umount $SCRATCH_DEV 2>/dev/null
+ _scratch_unmount 2> /dev/null
# call the overridden mkfs - make sure the FS is built
# the same as we'll create it later.
- if ! _scratch_mkfs $flag >$tmp.err 2>&1
+ if ! _scratch_mkfs >$tmp.err 2>&1
then
echo "our local _scratch_mkfs routine ..."
cat $tmp.err
echo "check: failed to mkfs \$SCRATCH_DEV using specified options"
- exit 1
+ status=1
+ exit
fi
# call the overridden mount - make sure the FS mounts with
echo "our local mount routine ..."
cat $tmp.err
echo "check: failed to mount \$SCRATCH_DEV using specified options"
- exit 1
+ status=1
+ exit
fi
fi
# the filename for the test and the name output are different.
# we don't include the tests/ directory in the name output.
- seqnum=`echo $seq | sed -e "s;$SRC_DIR/;;"`
+ export seqnum=`echo $seq | sed -e "s;$SRC_DIR/;;"`
# Similarly, the result directory needs to replace the tests/
# part of the test location.
echo -n "$seqnum"
- if $showme
- then
- echo
- continue
- elif [ ! -f $seq ]
- then
- echo " - no such test?"
- else
+ if $showme; then
+ echo
+ continue
+ elif [ ! -f $seq ]; then
+ # Try to get full name in case the user supplied only seq id
+ # and the test has a name. A bit of hassle to find really
+ # the test and not its sample output or helping files.
+ bname=$(basename $seq)
+ full_seq=$(find $(dirname $seq) -name $bname* -executable |
+ awk '(NR == 1 || length < length(shortest)) { shortest = $0 }\
+ END { print shortest }')
+ if [ -f $full_seq ] \
+ && [ x$(echo $bname | grep -o "^$VALID_TEST_ID") != x ]; then
+ seq=$full_seq
+ seqnum=${full_seq#*/}
+ fi
+ fi
+
+ if [ ! -f $seq ]; then
+ echo " - no such test?"
+ else
# really going to try and run this one
#
rm -f $seqres.out.bad
[ ! -x $seq ] && chmod u+x $seq # ensure we can run it
$LOGGER_PROG "run xfstest $seqnum"
if [ -w /dev/kmsg ]; then
- date_time=`date +"%F %T"`
+ export date_time=`date +"%F %T"`
echo "run fstests $seqnum at $date_time" > /dev/kmsg
# _check_dmesg depends on this log in dmesg
touch ${RESULT_DIR}/check_dmesg
fi
- ./$seq >$tmp.rawout 2>&1
- sts=$?
+ if [ "$DUMP_OUTPUT" = true ]; then
+ ./$seq 2>&1 | tee $tmp.rawout
+ # Because $? would get tee's return code
+ sts=${PIPESTATUS[0]}
+ else
+ ./$seq >$tmp.rawout 2>&1
+ sts=$?
+ fi
$timestamp && _timestamp
stop=`_wallclock`
try="$try $seqnum"
n_try=`expr $n_try + 1`
_check_filesystems
- _check_dmesg
+ _check_dmesg || err=true
fi
fi
_wrapup
echo
- umount $TEST_DEV 2> /dev/null
- umount $SCRATCH_DEV 2> /dev/null
+ _test_unmount 2> /dev/null
+ _scratch_unmount 2> /dev/null
done
interrupt=false
projects / xfstests-dev.git / blobdiff