##/bin/sh
#-----------------------------------------------------------------------
-# Copyright (c) 2000-2004 Silicon Graphics, Inc. All Rights Reserved.
+# Copyright (c) 2000-2005 Silicon Graphics, Inc. All Rights Reserved.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# Mountain View, CA 94043, USA, or: http://www.sgi.com
#-----------------------------------------------------------------------
+dd()
+{
+ if [ "$HOSTOS" == "Linux" ]
+ then
+ command dd --help | grep noxfer > /dev/null 2>&1
+
+ if [ "$?" -eq 0 ]
+ then
+ command dd status=noxfer $@
+ else
+ command dd $@
+ fi
+ else
+ command dd $@
+ fi
+}
+
_mount_opts()
{
case $FSTYP in
_test_mount()
{
- _test_options mount
+ _test_options mount
_mount -t $FSTYP $TEST_OPTIONS $MOUNT_OPTIONS $* $TEST_DEV $TEST_DIR
}
_scratch_mkfs_options()
{
- _scratch_options mkfs
+ _scratch_options mkfs
echo $SCRATCH_OPTIONS $MKFS_OPTIONS $* $SCRATCH_DEV
}
_scratch_mkfs_xfs()
{
- _scratch_options mkfs
+ _scratch_options mkfs
$MKFS_XFS_PROG $SCRATCH_OPTIONS $MKFS_OPTIONS $* $SCRATCH_DEV
mkfs_status=$?
#
-# _df_device : get an IRIX style df line for a given device
+# _df_device : get an IRIX style df line for a given device
#
# - returns "" if not mounted
# - returns fs type in field two (ala IRIX)
echo "Usage: _df_device device" 1>&2
exit 1
fi
-
+
$DF_PROG 2>/dev/null | $AWK_PROG -v what=$1 '
- match($1,what) && NF==1 {
+ match($1,what) && NF==1 {
v=$1
getline
print v, $0
echo "Usage: _df_dir device" 1>&2
exit 1
fi
-
+
$DF_PROG $1 2>/dev/null | $AWK_PROG -v what=$1 '
- NR == 2 && NF==1 {
+ NR == 2 && NF==1 {
v=$1
- getline
+ getline
print v, $0;
exit 0
}
echo "Usage: _used device" 1>&2
exit 1
fi
-
+
_df_device $1 | $AWK_PROG '{ sub("%", "") ; print $6 }'
}
echo "Usage: _fs_type device" 1>&2
exit 1
fi
-
+
_df_device $1 | $AWK_PROG '{ print $2 }'
}
echo "Usage: _fs_options device" 1>&2
exit 1
fi
-
+
$AWK_PROG -v dev=$1 '
match($1,dev) { print $4 }
' </proc/mounts
-
}
# returns device number if a file is a block device
echo "Usage: _is_block_dev dev" 1>&2
exit 1
fi
-
+
[ -b $1 ] && src/lstat64 $1 | $AWK_PROG '/Device type:/ { print $9 }'
}
}
# bail out, setting up .notrun file
-#
+#
_notrun()
{
echo "$*" >$seq.notrun
}
# just plain bail out
-#
+#
_fail()
{
echo "$*" | tee -a $here/$seq.full
}
# this test needs a scratch partition - check we're ok & unmount it
-#
+#
_require_scratch()
{
case "$FSTYP" in
then
_notrun "this test requires a valid \$SCRATCH_DEV"
fi
-
if [ "`_is_block_dev $SCRATCH_DEV`" = "`_is_block_dev $TEST_DEV`" ]
then
_notrun "this test requires a valid \$SCRATCH_DEV"
;;
esac
-
# mounted?
if _mount | grep -q $SCRATCH_DEV
- then
+ then
# if it's mounted, make sure its on $SCRATCH_MNT
if ! _mount | grep $SCRATCH_DEV | grep -q $SCRATCH_MNT
- then
+ then
echo "\$SCRATCH_DEV is mounted but not on \$SCRATCH_MNT - aborting"
exit 1
fi
fi
}
-# this test needs a logdev
-#
+# this test needs a logdev
+#
_require_logdev()
{
[ -z "$SCRATCH_LOGDEV" -o ! -b "$SCRATCH_LOGDEV" ] && \
- _notrun "This test requires a valid \$SCRATCH_LOGDEV"
+ _notrun "This test requires a valid \$SCRATCH_LOGDEV"
[ "$USE_EXTERNAL" != yes ] && \
_notrun "This test requires USE_EXTERNAL to be enabled"
}
# this test requires loopback device support
-#
+#
_require_loop()
{
if [ "$HOSTOS" != "Linux" ]
}
# this test requires that (large) loopback device files are not in use
-#
+#
_require_nobigloopfs()
{
[ "$USE_BIG_LOOPFS" = yes ] && \
# this test requires that a realtime subvolume is in use, and
# that the kernel supports realtime as well.
-#
+#
_require_realtime()
{
[ "$USE_EXTERNAL" = yes ] || \
}
# this test requires that a specified command (executable) exists
-#
+#
_require_command()
{
[ -x "$1" ] || _notrun "$1 utility required, skipped this test"
}
# this test requires that external log/realtime devices are not in use
-#
+#
_require_nonexternal()
{
[ "$USE_EXTERNAL" = yes ] && \
echo "Usage: _xfs_mounted device" 1>&2
exit 1
fi
-
+
device=$1
-
+
if _mount | grep $device | $AWK_PROG '
/type xfs/ { print $3 ; exit 0 }
END { exit 1 }
fi
device=$1
mode=$2
-
+
if ! mount -o remount,$mode $device
then
echo "_remount: failed to remount filesystem on $device as $mode"
fi
}
-# run xfs_check and friends on a FS.
+# run xfs_check and friends on a FS.
#
# if the filesystem is mounted, it's either remounted ro before being
# checked or it's unmounted and then remounted
extra_rt_options="-r$3"
extra_mount_options=$extra_mount_options" -ortdev=$3"
fi
+ extra_mount_options=$extra_mount_options" $MOUNT_OPTIONS"
[ "$FSTYP" != xfs ] && return 0
testoption=""
type=`_fs_type $device`
ok=1
-
+
if [ "$type" = "xfs" ]
then
- # mounted...
-
+ # mounted...
+
if [ $USE_REMOUNT -eq 0 ]
then
mountpoint=`_xfs_mounted $device`
if [ $? -ne 0 -a "$HOSTOS" = "Linux" ]
then
echo "_check_xfs_filesystem: filesystem on $device has dirty log (see $seq.full)"
-
+
echo "_check_xfs_filesystem: filesystem on $device has dirty log" >>$here/$seq.full
echo "*** xfs_logprint -t output ***" >>$here/$seq.full
cat $tmp.logprint >>$here/$seq.full
echo "*** end xfs_logprint output" >>$here/$seq.full
-
+
ok=0
fi
$XFS_CHECK_PROG $testoption $extra_log_options $device 2>&1 |\
- _fix_malloc >$tmp.fs_check
+ _fix_malloc >$tmp.fs_check
if [ -s $tmp.fs_check ]
then
echo "_check_xfs_filesystem: filesystem on $device is inconsistent (c) (see $seq.full)"
-
+
echo "_check_xfs_filesystem: filesystem on $device is inconsistent" >>$here/$seq.full
echo "*** xfs_check output ***" >>$here/$seq.full
cat $tmp.fs_check >>$here/$seq.full
echo "*** end xfs_check output" >>$here/$seq.full
-
+
ok=0
fi
# repair doesn't scale massively at this stage, optionally skip it for now
if [ $? -ne 0 ]
then
echo "_check_xfs_filesystem: filesystem on $device is inconsistent (r) (see $seq.full)"
-
+
echo "_check_xfs_filesystem: filesystem on $device is inconsistent" >>$here/$seq.full
echo "*** xfs_repair -n output ***" >>$here/$seq.full
cat $tmp.repair | _fix_malloc >>$here/$seq.full
echo "*** end xfs_repair output" >>$here/$seq.full
-
+
ok=0
fi
rm -f $tmp.fs_check $tmp.logprint $tmp.repair
-
+
if [ $ok -eq 0 ]
then
echo "*** mount output ***" >>$here/$seq.full
echo "*** end mount output" >>$here/$seq.full
elif [ "$type" = "xfs" ]
then
- # mounted...
+ # mounted...
if [ $USE_REMOUNT -eq 0 ]
then
if ! _mount -t xfs $extra_mount_options $device $mountpoint
_remount $device rw
fi
fi
-
+
[ $ok -eq 0 ] && exit 1
- return 0
+ return 0
}
-# Filter the knowen errors the UDF Verifier reports.
-_udf_test_known_error_filter()
+# Filter the knowen errors the UDF Verifier reports.
+_udf_test_known_error_filter()
{
egrep -v "PVD 60 Error: Interchange Level: 1, Maximum Interchange Level: 0|FSD 28 Error: Interchange Level: 1, Maximum Interchange Level: 1,|PVD 72 Warning: Volume Set Identifier: \"\*IRIX UDF\",|Warning: [0-9]+ unused blocks NOT marked as unallocated."
if [ ! -x $here/src/udf_test ]
then
- echo "udf_test not installed, please download and build the Philips"
+ echo "udf_test not installed, please download and build the Philips"
echo "UDF Verification Software from http://www.extra.research.philips.com/udf/."
echo "Then copy the udf_test binary to $here/src/."
echo "If you do not wish to run udf_test then set environment variable DISABLE_UDF_TEST"
echo "to 1."
return
fi
-
+
device=$1
if [ $# -eq 2 ];
then
TEST_RT="$TEST_RTDEV"
_check_xfs_filesystem $TEST_DEV $TEST_LOG $TEST_RT
+
+ # check for ipath consistency
+ if $XFS_GROWFS_PROG -n $TEST_DIR | grep -q 'inode-paths=1'; then
+ # errors go to stderr
+ xfs_check_ipaths $TEST_DIR >/dev/null
+ xfs_repair_ipaths -n $TEST_DIR >/dev/null
+ fi
}
_check_scratch_fs()
{
[ "$FSTYP" != "xfs" ] \
&& _fail "setup_xfs_testdir: \$FSTYP ($FSTYP) is not xfs"
-
+
testdir=$TEST_DIR
}
&& _notrun "this test requires a valid \$SCRATCH_DEV"
[ -z "$SCRATCH_MNT" ] \
&& _notrun "this test requires a valid \$SCRATCH_MNT"
-
+
# mounted?
if _mount | grep -q $SCRATCH_DEV
- then
+ then
# if it's mounted, make sure its on $TEST_RW_DIR
if ! _mount | grep $SCRATCH_DEV | grep -q $SCRATCH_MNT
- then
+ then
_fail "\$SCRATCH_DEV is mounted but not on \$SCRATCH_MNT - aborting"
fi
$UMOUNT_PROG $SCRATCH_DEV
- fi
+ fi
_scratch_mkfs
_scratch_mount
&& _notrun "this test requires a valid host fs for \$SCRATCH_DEV"
[ -z "$SCRATCH_MNT" ] \
&& _notrun "this test requires a valid \$SCRATCH_MNT"
-
+
# mounted?
if _mount | grep -q $SCRATCH_DEV
- then
+ then
# if it's mounted, make sure its on $SCRATCH_MNT
if ! _mount | grep $SCRATCH_DEV | grep -q $SCRATCH_MNT
- then
+ then
_fail "\$SCRATCH_DEV is mounted but not on \$SCRATCH_MNT - aborting"
fi
$UMOUNT_PROG $SCRATCH_DEV
- fi
+ fi
_scratch_mkfs
_scratch_mount
}
#
-# Warning for UDF and NFS this function calls _setup_udf_scratchdir and
-# _setup_udf_scratchdir. This is done because testdir is a persistent
-# XFS only partition.
+# Warning for UDF and NFS this function calls _setup_udf_scratchdir and
+# _setup_udf_scratchdir. This is done because testdir is a persistent
+# XFS only partition.
#
_setup_testdir()
{
*)
_fail "\$FSTYP is not xfs, udf or nfs"
;;
- esac
+ esac
}
_cleanup_testdir()
*)
_fail "\$FSTYP is not xfs, udf or nfs"
;;
- esac
+ esac
}
-################################################################################
-
-if [ "$iam" != new -a "$iam" != bench ]
-then
- # make some further configuration checks here
-
- if [ "$TEST_DEV" = "" ]
- then
- echo "common.rc: Error: \$TEST_DEV is not set"
- exit 1
- fi
-
- # if $TEST_DEV is not mounted, mount it now as XFS
- if [ -z "`_fs_type $TEST_DEV`" ]
- then
- # $TEST_DEV is not mounted
- if ! _test_mount
- then
- echo "common.rc: retrying test device mount with external set"
- [ "$USE_EXTERNAL" != "yes" ] && export USE_EXTERNAL=yes
- if ! _test_mount
- then
- echo "common.rc: could not mount $TEST_DEV on $TEST_DIR"
- exit 1
- fi
- fi
- fi
-
- if [ "`_fs_type $TEST_DEV`" != "xfs" ]
- then
- echo "common.rc: Error: \$TEST_DEV ($TEST_DEV) is not a MOUNTED XFS filesystem"
- $DF_PROG $TEST_DEV
- exit 1
- fi
-
-fi
-
_link_out_file()
{
if [ -z "$1" ]; then
echo Error must pass \$seq.
- exit
+ exit
fi
rm -f $1
if [ "`uname`" == "IRIX64" ] || [ "`uname`" == "IRIX" ]; then
fi
}
-# Populate a filesystem with inodes for performance experiments
-#
-# usage: populate [-v] [-n ndirs] [-f nfiles] [-d depth] [-r root] [-s size]
-#
-
_die()
{
echo $@
file=f$f
touch $file
if [ $size -gt 0 ]; then
- dd if=/dev/zero of=$file bs=1024 count=$size
+ dd if=/dev/zero of=$file bs=1024 count=$size
fi
f=`expr $f + 1`
done
done
}
-
+# Populate a filesystem with inodes for performance experiments
+#
+# usage: populate [-v] [-n ndirs] [-f nfiles] [-d depth] [-r root] [-s size]
+#
_populate_fs()
{
-
here=`pwd`
dirs=5 # ndirs in each subdir till leaves
size=0 # sizeof files in K
esac
done
-
_descend $root $depth
wait
cd $here
[ $verbose = true ] && echo done
+}
+
+# query whether the given file has the given inode flag set
+#
+_test_inode_flag()
+{
+ flag=$1
+ file=$2
+
+ if which $XFS_IO_PROG >/dev/null; then
+ if $XFS_IO_PROG -r -c 'lsattr -v' "$file" | grep -q "$flag" ; then
+ return 0
+ fi
+ fi
+ return 1
+}
+
+# query the given files extsize allocator hint in bytes (if any)
+#
+_test_inode_extsz()
+{
+ file=$1
+ blocks=""
+ if which $XFS_IO_PROG >/dev/null; then
+ blocks=`$XFS_IO_PROG -r -c 'stat' "$file" | \
+ awk '/^xattr.extsize =/ { print $3 }'`
+ fi
+ [ -z "$blocks" ] && blocks="0"
+ echo $blocks
}
+
+################################################################################
+
+if [ "$iam" != new -a "$iam" != bench ]
+then
+ # make some further configuration checks here
+
+ if [ "$TEST_DEV" = "" ]
+ then
+ echo "common.rc: Error: \$TEST_DEV is not set"
+ exit 1
+ fi
+
+ # if $TEST_DEV is not mounted, mount it now as XFS
+ if [ -z "`_fs_type $TEST_DEV`" ]
+ then
+ # $TEST_DEV is not mounted
+ if ! _test_mount
+ then
+ echo "common.rc: retrying test device mount with external set"
+ [ "$USE_EXTERNAL" != "yes" ] && export USE_EXTERNAL=yes
+ if ! _test_mount
+ then
+ echo "common.rc: could not mount $TEST_DEV on $TEST_DIR"
+ exit 1
+ fi
+ fi
+ fi
+
+ if [ "`_fs_type $TEST_DEV`" != "$FSTYP" ]
+ then
+ echo "common.rc: Error: \$TEST_DEV ($TEST_DEV) is not a MOUNTED $FSTYP filesystem"
+ $DF_PROG $TEST_DEV
+ exit 1
+ fi
+fi
+
# make sure this script returns success
/bin/true
projects / xfstests-dev.git / blobdiff