# RMT_IRIXTAPE_DEV- the IRIX remote tape device for the xfsdump tests
# RMT_TAPE_USER - remote user for tape device
# SELINUX_MOUNT_OPTIONS - Options to use when SELinux is enabled.
+# KEEP_DMESG - whether to keep all dmesg for each test case.
+# yes: keep all dmesg
+# no: only keep dmesg with error/warning (default)
#
# - These can be added to $HOST_CONFIG_DIR (witch default to ./config)
# below or a separate local configuration file can be used (using
PATH=".:$PATH"
export HOST=`hostname -s`
-export HOSTOS=`uname -s`
+test `uname -s` = "Linux" || _fatal "fstests only supports Linux"
export MODULAR=0 # using XFS as a module or not
export BOOT="/boot" # install target for kernels
export OVL_WORK="ovl-work"
# overlay mount point parent must be the base fs root
export OVL_MNT="ovl-mnt"
+# By default unionmount-testsuite is expected under src
+export UNIONMOUNT_TESTSUITE=${UNIONMOUNT_TESTSUITE:=$here/src/unionmount-testsuite}
# From e2fsprogs/e2fsck/e2fsck.h:
# Exit code used by fsck-type programs
export DF_PROG="$(type -P df)"
[ "$DF_PROG" = "" ] && _fatal "df not found"
-[ "$HOSTOS" = "Linux" ] && export DF_PROG="$DF_PROG -T -P"
+export DF_PROG="$DF_PROG -T -P" # Linux
export XFS_IO_PROG="$(type -P xfs_io)"
[ "$XFS_IO_PROG" = "" ] && _fatal "xfs_io not found"
export XFS_LOGPRINT_PROG="$(type -P xfs_logprint)"
export XFS_REPAIR_PROG="$(type -P xfs_repair)"
export XFS_DB_PROG="$(type -P xfs_db)"
+export XFS_METADUMP_PROG="$(type -P xfs_metadump)"
+export XFS_ADMIN_PROG="$(type -P xfs_admin)"
export XFS_GROWFS_PROG=$(type -P xfs_growfs)
export XFS_SPACEMAN_PROG="$(type -P xfs_spaceman)"
export XFS_SCRUB_PROG="$(type -P xfs_scrub)"
export FSTRIM_PROG="$(type -P fstrim)"
export DUMPE2FS_PROG="$(type -P dumpe2fs)"
export RESIZE2FS_PROG="$(type -P resize2fs)"
+export F2FS_IO_PROG="$(type -P f2fs_io)"
export FIO_PROG="$(type -P fio)"
export FILEFRAG_PROG="$(type -P filefrag)"
export E4DEFRAG_PROG="$(type -P e4defrag)"
export SETRICHACL_PROG="$(type -P setrichacl)"
export KEYCTL_PROG="$(type -P keyctl)"
export XZ_PROG="$(type -P xz)"
+export LZ4_PROG="$(type -P lz4)"
export FLOCK_PROG="$(type -P flock)"
export LDD_PROG="$(type -P ldd)"
export TIMEOUT_PROG="$(type -P timeout)"
export CC_PROG="$(type -P cc)"
export FSVERITY_PROG="$(type -P fsverity)"
export OPENSSL_PROG="$(type -P openssl)"
+export ACCTON_PROG="$(type -P accton)"
+export E2IMAGE_PROG="$(type -P e2image)"
+export BLKZONE_PROG="$(type -P blkzone)"
# use 'udevadm settle' or 'udevsettle' to wait for lv to be settled.
# newer systems have udevadm command but older systems like RHEL5 don't.
fi
export UDEV_SETTLE_PROG
-case "$HOSTOS" in
- Linux)
- export MKFS_XFS_PROG=$(type -P mkfs.xfs)
- export MKFS_EXT4_PROG=$(type -P mkfs.ext4)
- export MKFS_UDF_PROG=$(type -P mkudffs)
- export MKFS_BTRFS_PROG=$(set_mkfs_prog_path_with_opts btrfs)
- export MKFS_F2FS_PROG=$(set_mkfs_prog_path_with_opts f2fs)
- export DUMP_F2FS_PROG=$(type -P dump.f2fs)
- export BTRFS_UTIL_PROG=$(type -P btrfs)
- export BTRFS_SHOW_SUPER_PROG=$(type -P btrfs-show-super)
- export BTRFS_CONVERT_PROG=$(type -P btrfs-convert)
- export BTRFS_TUNE_PROG=$(type -P btrfstune)
- export XFS_FSR_PROG=$(type -P xfs_fsr)
- export MKFS_NFS_PROG="false"
- export MKFS_CIFS_PROG="false"
- export MKFS_OVERLAY_PROG="false"
- export MKFS_REISER4_PROG=$(type -P mkfs.reiser4)
- export E2FSCK_PROG=$(type -P e2fsck)
- export TUNE2FS_PROG=$(type -P tune2fs)
- export FSCK_OVERLAY_PROG=$(type -P fsck.overlay)
- ;;
-esac
+export MKFS_XFS_PROG=$(type -P mkfs.xfs)
+export MKFS_EXT4_PROG=$(type -P mkfs.ext4)
+export MKFS_UDF_PROG=$(type -P mkudffs)
+export MKFS_BTRFS_PROG=$(set_mkfs_prog_path_with_opts btrfs)
+export MKFS_F2FS_PROG=$(set_mkfs_prog_path_with_opts f2fs)
+export DUMP_F2FS_PROG=$(type -P dump.f2fs)
+export F2FS_IO_PROG=$(type -P f2fs_io)
+export BTRFS_UTIL_PROG=$(type -P btrfs)
+export BTRFS_SHOW_SUPER_PROG=$(type -P btrfs-show-super)
+export BTRFS_CONVERT_PROG=$(type -P btrfs-convert)
+export BTRFS_TUNE_PROG=$(type -P btrfstune)
+export XFS_FSR_PROG=$(type -P xfs_fsr)
+export MKFS_NFS_PROG="false"
+export MKFS_CIFS_PROG="false"
+export MKFS_OVERLAY_PROG="false"
+export MKFS_REISER4_PROG=$(type -P mkfs.reiser4)
+export E2FSCK_PROG=$(type -P e2fsck)
+export TUNE2FS_PROG=$(type -P tune2fs)
+export FSCK_OVERLAY_PROG=$(type -P fsck.overlay)
# SELinux adds extra xattrs which can mess up our expected output.
# So, mount with a context, and they won't be created.
f2fs)
export MKFS_OPTIONS="$F2FS_MKFS_OPTIONS"
;;
+ btrfs)
+ export MKFS_OPTIONS="$BTRFS_MKFS_OPTIONS"
+ ;;
*)
;;
esac
# in the section name otherwise the section will not be resognised.
# Section name must be contained between square brackets.
get_config_sections() {
- sed -n -e "s/^\[\([[:alnum:]_]*\)\]/\1/p" < $1
+ sed -n -e "s/^\[\([[:alnum:]_-]*\)\]/\1/p" < $1
}
if [ ! -f "$HOST_OPTIONS" ]; then
fi
case "$FSTYP" in
- 9p|tmpfs)
- # 9p mount tags are just plain strings, so anything is allowed
+ 9p|tmpfs|virtiofs)
+ # 9p and virtiofs mount tags are just plain strings, so anything is allowed
# tmpfs doesn't use mount source, ignore
;;
overlay)
# Autodetect fs type based on what's on $TEST_DEV unless it's been set
# externally
- if [ -z "$FSTYP" ] && \
- [ "$HOSTOS" == "Linux" -o "$OSTYPE" == "linux-gnu" ] && \
- [ ! -z "$TEST_DEV" ]; then
+ if [ -z "$FSTYP" ] && [ ! -z "$TEST_DEV" ]; then
FSTYP=`blkid -c /dev/null -s TYPE -o value $TEST_DEV`
fi
FSTYP=${FSTYP:=xfs}
projects / xfstests-dev.git / blobdiff