# RMT_TAPE_DEV - the remote tape device for the xfsdump tests
# RMT_IRIXTAPE_DEV- the IRIX remote tape device for the xfsdump tests
# RMT_TAPE_USER - remote user for tape device
+# SELINUX_MOUNT_OPTIONS - Options to use when SELinux is enabled.
#
# - These can be added to $HOST_CONFIG_DIR (witch default to ./config)
# below or a separate local configuration file can be used (using
# all tests should use a common language setting to prevent golden
# output mismatches.
export LANG=C
+export LC_ALL=C
# Warning: don't put freeware before /usr/bsd on IRIX coz you'll
# get the wrong hostname and set your system name to -s :)
export LOAD_FACTOR=${LOAD_FACTOR:=1}
export DEBUGFS_MNT=${DEBUGFS_MNT:="/sys/kernel/debug"}
+# some constants for overlayfs setup
+export OVL_UPPER="ovl-upper"
+export OVL_LOWER="ovl-lower"
+export OVL_WORK="ovl-work"
+# overlay mount point parent must be the base fs root
+export OVL_MNT="ovl-mnt"
+
export PWD=`pwd`
#export DEBUG=${DEBUG:=...} # arbitrary CFLAGS really.
export MALLOCLIB=${MALLOCLIB:=/usr/lib/libefence.a}
export LOCAL_CONFIGURE_OPTIONS=${LOCAL_CONFIGURE_OPTIONS:=--enable-readline=yes}
-# $1 = prog to look for, $2* = default pathnames if not found in $PATH
+export RECREATE_TEST_DEV=false
+
+# $1 = prog to look for
set_prog_path()
{
- p=`which $1 2> /dev/null`
- if [ -n "$p" -a -x "$p" ]; then
- echo $p
- return 0
- fi
- p=$1
-
- shift
- for f; do
- if [ -x $f ]; then
- echo $f
- return 0
- fi
- done
-
- echo ""
- return 1
+ type -P $1
}
# Handle mkfs.btrfs which does (or does not) require -f to overwrite
export UMOUNT_PROG="`set_prog_path umount`"
[ "$UMOUNT_PROG" = "" ] && _fatal "umount not found"
-export FSSTRESS_PROG="`set_prog_path fsstress $PWD/ltp/fsstress`"
-[ "$FSSTRESS_PROG" = "" ] && _fatal "fsstress not found"
+export FSSTRESS_PROG="./ltp/fsstress"
+[ ! -x $FSSTRESS_PROG ] && _fatal "fsstress not found or executable"
export PERL_PROG="`set_prog_path perl`"
[ "$PERL_PROG" = "" ] && _fatal "perl not found"
export DF_PROG="`set_prog_path df`"
[ "$DF_PROG" = "" ] && _fatal "df not found"
-[ "$HOSTOS" = "Linux" ] && export DF_PROG="$DF_PROG -T"
+[ "$HOSTOS" = "Linux" ] && export DF_PROG="$DF_PROG -T -P"
+
+export XFS_IO_PROG="`set_prog_path xfs_io`"
+[ "$XFS_IO_PROG" = "" ] && _fatal "xfs_io not found"
export XFS_LOGPRINT_PROG="`set_prog_path xfs_logprint`"
export XFS_REPAIR_PROG="`set_prog_path xfs_repair`"
export XFS_DB_PROG="`set_prog_path xfs_db`"
export XFS_GROWFS_PROG=`set_prog_path xfs_growfs`
-export XFS_IO_PROG="`set_prog_path xfs_io`"
+export XFS_SCRUB_PROG="`set_prog_path xfs_scrub`"
export XFS_PARALLEL_REPAIR_PROG="`set_prog_path xfs_prepair`"
export XFS_PARALLEL_REPAIR64_PROG="`set_prog_path xfs_prepair64`"
export __XFSDUMP_PROG="`set_prog_path xfsdump`"
-export XFSDUMP_PROG="$__XFSDUMP_PROG -e"
+if [ -n "$__XFSDUMP_PROG" ]; then
+ export XFSDUMP_PROG="$__XFSDUMP_PROG -e"
+else
+ export XFSDUMP_PROG=""
+fi
export XFSRESTORE_PROG="`set_prog_path xfsrestore`"
export XFSINVUTIL_PROG="`set_prog_path xfsinvutil`"
export GETFATTR_PROG="`set_prog_path getfattr`"
export SETFATTR_PROG="`set_prog_path setfattr`"
+export CHACL_PROG="`set_prog_path chacl`"
export ATTR_PROG="`set_prog_path attr`"
export QUOTA_PROG="`set_prog_path quota`"
export XFS_QUOTA_PROG="`set_prog_path xfs_quota`"
export LOGGER_PROG="`set_prog_path logger`"
export DBENCH_PROG="`set_prog_path dbench`"
export DMSETUP_PROG="`set_prog_path dmsetup`"
-
-# Generate a comparable xfsprogs version number in the form of
-# major * 10000 + minor * 100 + release
-#
-# $ xfs_db -V
-# xfs_db version 2.9.7
-#
-# so, 2.9.7 = 20907
-_version=`$XFS_DB_PROG -V | $AWK_PROG '
- /version/ {
- if (split($3,ver,".") == 3)
- print (ver[1] * 10000) + (ver[2] * 100) + ver[3];
- }'`
-[ -z "$_version" ] && _fatal "xfsprogs version cannot be found"
-export XFSPROGS_VERSION="$_version"
+export WIPEFS_PROG="`set_prog_path wipefs`"
+export DUMP_PROG="`set_prog_path dump`"
+export RESTORE_PROG="`set_prog_path restore`"
+export LVM_PROG="`set_prog_path lvm`"
+export CHATTR_PROG="`set_prog_path chattr`"
+export DEBUGFS_PROG="`set_prog_path debugfs`"
+export UUIDGEN_PROG="`set_prog_path uuidgen`"
+export GETRICHACL_PROG="`set_prog_path getrichacl`"
+export SETRICHACL_PROG="`set_prog_path setrichacl`"
+export KEYCTL_PROG="`set_prog_path keyctl`"
+export XZ_PROG="`set_prog_path xz`"
+export FLOCK_PROG="`set_prog_path flock`"
+export LDD_PROG="`set_prog_path ldd`"
+export TIMEOUT_PROG="`set_prog_path timeout`"
+
+# use 'udevadm settle' or 'udevsettle' to wait for lv to be settled.
+# newer systems have udevadm command but older systems like RHEL5 don't.
+# But if neither one is available, just set it to "sleep 1" to wait for lv to
+# be settled
+UDEV_SETTLE_PROG="`set_prog_path udevadm`"
+if [ "$UDEV_SETTLE_PROG" == "" ]; then
+ # try udevsettle command
+ UDEV_SETTLE_PROG="`set_prog_path udevsettle`"
+else
+ # udevadm is available, add 'settle' as subcommand
+ UDEV_SETTLE_PROG="$UDEV_SETTLE_PROG settle"
+fi
+# neither command is available, use sleep 1
+if [ "$UDEV_SETTLE_PROG" == "" ]; then
+ UDEV_SETTLE_PROG="sleep 1"
+fi
+export UDEV_SETTLE_PROG
case "$HOSTOS" in
IRIX*)
export MKFS_UDF_PROG="`set_prog_path mkfs_udf`"
export XFS_FSR_PROG="`set_prog_path /usr/etc/fsr_xfs`"
export MKFS_NFS_PROG="false"
+ export MKFS_CIFS_PROG="false"
;;
Linux)
export MKFS_XFS_PROG="`set_prog_path mkfs.xfs`"
+ export MKFS_EXT4_PROG="`set_prog_path mkfs.ext4`"
export MKFS_UDF_PROG="`set_prog_path mkudffs`"
export MKFS_BTRFS_PROG="`set_btrfs_mkfs_prog_path_with_opts`"
+ export MKFS_F2FS_PROG="`set_prog_path mkfs.f2fs`"
+ export DUMP_F2FS_PROG="`set_prog_path dump.f2fs`"
export BTRFS_UTIL_PROG="`set_prog_path btrfs`"
export BTRFS_SHOW_SUPER_PROG="`set_prog_path btrfs-show-super`"
+ export BTRFS_CONVERT_PROG="`set_prog_path btrfs-convert`"
export XFS_FSR_PROG="`set_prog_path xfs_fsr`"
export MKFS_NFS_PROG="false"
+ export MKFS_CIFS_PROG="false"
+ export MKFS_OVERLAY_PROG="false"
+ export MKFS_REISER4_PROG="`set_prog_path mkfs.reiser4`"
+ export E2FSCK_PROG="`set_prog_path e2fsck`"
+ export TUNE2FS_PROG="`set_prog_path tune2fs`"
;;
esac
+# SELinux adds extra xattrs which can mess up our expected output.
+# So, mount with a context, and they won't be created.
+#
+# Since the context= option only accepts contexts defined in the SELinux
+# policy, and different systems may have different policies with
+# different context names, use the context of an existing directory.
+# Assume that any valid context is fine, since xfstests should really
+# only be run from an "unconfined" process, or with SELinux in permissive
+# mode. But if not, just specify your own SELINUX_MOUNT_OPTIONS.
+if [ -x /usr/sbin/selinuxenabled ] && /usr/sbin/selinuxenabled; then
+ : ${SELINUX_MOUNT_OPTIONS:="-o context=$(stat -c %C /)"}
+ export SELINUX_MOUNT_OPTIONS
+fi
+
+# check if mkfs.xfs supports v5 xfs
+XFS_MKFS_HAS_NO_META_SUPPORT=""
+touch /tmp/crc_check.img
+$MKFS_XFS_PROG -N -d file,name=/tmp/crc_check.img,size=32m -m crc=0 \
+ >/dev/null 2>&1;
+if [ $? -ne 0 ]; then
+ XFS_MKFS_HAS_NO_META_SUPPORT=true
+fi
+rm -f /tmp/crc_check.img
+export XFS_MKFS_HAS_NO_META_SUPPORT
+
+# new doesn't need config file parsed, we can stop here
+if [ "$iam" == "new" ]; then
+ return 0
+fi
+
+_mount_opts()
+{
+ case $FSTYP in
+ xfs)
+ export MOUNT_OPTIONS=$XFS_MOUNT_OPTIONS
+ ;;
+ udf)
+ export MOUNT_OPTIONS=$UDF_MOUNT_OPTIONS
+ ;;
+ nfs)
+ export MOUNT_OPTIONS=$NFS_MOUNT_OPTIONS
+ ;;
+ cifs)
+ export MOUNT_OPTIONS=$CIFS_MOUNT_OPTIONS
+ ;;
+ ceph)
+ export MOUNT_OPTIONS=$CEPHFS_MOUNT_OPTIONS
+ ;;
+ glusterfs)
+ export MOUNT_OPTIONS=$GLUSTERFS_MOUNT_OPTIONS
+ ;;
+ overlay)
+ export MOUNT_OPTIONS=$OVERLAY_MOUNT_OPTIONS
+ ;;
+ ext2|ext3|ext4|ext4dev)
+ # acls & xattrs aren't turned on by default on ext$FOO
+ export MOUNT_OPTIONS="-o acl,user_xattr $EXT_MOUNT_OPTIONS"
+ ;;
+ f2fs)
+ export MOUNT_OPTIONS="-o acl,user_xattr $F2FS_MOUNT_OPTIONS"
+ ;;
+ reiserfs)
+ # acls & xattrs aren't turned on by default on reiserfs
+ export MOUNT_OPTIONS="-o acl,user_xattr $REISERFS_MOUNT_OPTIONS"
+ ;;
+ reiser4)
+ # acls & xattrs aren't supported by reiser4
+ export MOUNT_OPTIONS=$REISER4_MOUNT_OPTIONS
+ ;;
+ gfs2)
+ # acls aren't turned on by default on gfs2
+ export MOUNT_OPTIONS="-o acl $GFS2_MOUNT_OPTIONS"
+ ;;
+ tmpfs)
+ # We need to specify the size at mount, use 1G by default
+ export MOUNT_OPTIONS="-o size=1G $TMPFS_MOUNT_OPTIONS"
+ ;;
+ *)
+ ;;
+ esac
+}
+
+_test_mount_opts()
+{
+ case $FSTYP in
+ cifs)
+ export TEST_FS_MOUNT_OPTS=$CIFS_MOUNT_OPTIONS
+ ;;
+ ceph)
+ export TEST_FS_MOUNT_OPTS=$CEPHFS_MOUNT_OPTIONS
+ ;;
+ nfs)
+ export TEST_FS_MOUNT_OPTS=$NFS_MOUNT_OPTIONS
+ ;;
+ glusterfs)
+ export TEST_FS_MOUNT_OPTS=$GLUSTERFS_MOUNT_OPTIONS
+ ;;
+ *)
+ ;;
+ esac
+}
+
+_mkfs_opts()
+{
+ case $FSTYP in
+ xfs)
+ export MKFS_OPTIONS=$XFS_MKFS_OPTIONS
+ ;;
+ udf)
+ [ ! -z "$udf_fsize" ] && \
+ UDF_MKFS_OPTIONS="$UDF_MKFS_OPTIONS -s $udf_fsize"
+ export MKFS_OPTIONS=$UDF_MKFS_OPTIONS
+ ;;
+ nfs)
+ export MKFS_OPTIONS=$NFS_MKFS_OPTIONS
+ ;;
+ cifs)
+ export MKFS_OPTIONS=$CIFS_MKFS_OPTIONS
+ ;;
+ ceph)
+ export MKFS_OPTIONS=$CEPHFS_MKFS_OPTIONS
+ ;;
+ reiserfs)
+ export MKFS_OPTIONS="$REISERFS_MKFS_OPTIONS -q"
+ ;;
+ reiser4)
+ export MKFS_OPTIONS=$REISER4_MKFS_OPTIONS
+ ;;
+ gfs2)
+ export MKFS_OPTIONS="$GFS2_MKFS_OPTIONS -O -p lock_nolock"
+ ;;
+ jfs)
+ export MKFS_OPTIONS="$JFS_MKFS_OPTIONS -q"
+ ;;
+ f2fs)
+ export MKFS_OPTIONS="$F2FS_MKFS_OPTIONS"
+ ;;
+ *)
+ ;;
+ esac
+}
+
+_fsck_opts()
+{
+ case $FSTYP in
+ ext2|ext3|ext4|ext4dev)
+ export FSCK_OPTIONS="-nf"
+ ;;
+ reiser*)
+ export FSCK_OPTIONS="--yes"
+ ;;
+ f2fs)
+ export FSCK_OPTIONS=""
+ ;;
+ *)
+ export FSCK_OPTIONS="-n"
+ ;;
+ esac
+}
+
known_hosts()
{
[ "$HOST_CONFIG_DIR" ] || HOST_CONFIG_DIR=`pwd`/configs
[ -f $HOST_CONFIG_DIR/$HOST.config ] && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST.config
}
+# Returns a list of sections in config file
+# Each section starts with the section name in the format
+# [section_name1]. Only alphanumeric characters and '_' is allowed
+# in the section name otherwise the section will not be resognised.
+# Section name must be contained between square brackets.
+get_config_sections() {
+ sed -n -e "s/^\[\([[:alnum:]_]*\)\]/\1/p" < $1
+}
+
if [ ! -f "$HOST_OPTIONS" ]; then
known_hosts
fi
+export HOST_OPTIONS_SECTIONS="-no-sections-"
+export OPTIONS_HAVE_SECTIONS=false
if [ -f "$HOST_OPTIONS" ]; then
- . $HOST_OPTIONS
+ export HOST_OPTIONS_SECTIONS=`get_config_sections $HOST_OPTIONS`
+ if [ -z "$HOST_OPTIONS_SECTIONS" ]; then
+ . $HOST_OPTIONS
+ export HOST_OPTIONS_SECTIONS="-no-sections-"
+ else
+ export OPTIONS_HAVE_SECTIONS=true
+ fi
fi
+_check_device()
+{
+ local name=$1
+ local dev_needed=$2
+ local dev=$3
+
+ if [ -z "$dev" ]; then
+ if [ "$dev_needed" == "required" ]; then
+ _fatal "common/config: $name is required but not defined!"
+ fi
+ return 0
+ fi
+
+ if [ -b "$dev" ] || ( echo $dev | grep -qE ":|//" ); then
+ # block device or a network url
+ return 0
+ fi
+
+ if [ "$FSTYP" == "overlay" ]; then
+ if [ ! -d "$dev" ]; then
+ _fatal "common/config: $name ($dev) is not a directory for overlay"
+ fi
+ else
+ _fatal "common/config: $name ($dev) is not a block device or a network filesystem"
+ fi
+}
+
+# check and return a canonical mount point path
+_canonicalize_mountpoint()
+{
+ local name=$1
+ local dir=$2
+
+ if [ -d "$dir" ]; then
+ # this follows symlinks and removes all trailing "/"s
+ readlink -e "$dir"
+ return 0
+ fi
+
+ if [ "$FSTYP" != "overlay" ] || [[ "$name" == OVL_BASE_* ]]; then
+ _fatal "common/config: $name ($dir) is not a directory"
+ fi
+
+ # base fs may not be mounted yet, so just check that parent dir
+ # exists (where base fs will be mounted) because we are going to
+ # mkdir the overlay mount point dir anyway
+ local base=`basename $dir`
+ local parent=`dirname $dir`
+ parent=`_canonicalize_mountpoint OVL_BASE_$name "$parent"`
+
+ # prepend the overlay mount point to canonical parent path
+ echo "$parent/$base"
+}
+
+# On check -overlay, for the non multi section config case, this
+# function is called on every test, before init_rc().
+# When SCRATCH/TEST_* vars are defined in config file, config file
+# is sourced on every test and this function overrides the vars
+# every time.
+# When SCRATCH/TEST_* vars are defined in evironment and not
+# in config file, this function is called after vars have already
+# been overriden in the previous test.
+# In that case, TEST_DEV is a directory and not a blockdev and
+# the function will return without overriding the SCRATCH/TEST_* vars.
+_overlay_config_override()
+{
+ # There are 2 options for configuring overlayfs tests:
+ #
+ # 1. (legacy) SCRATCH/TEST_DEV point to existing directories
+ # on an already mounted fs. In this case, the new
+ # OVL_BASE_SCRATCH/TEST_* vars are set to use the legacy
+ # vars values (even though they may not be mount points).
+ #
+ [ ! -d "$TEST_DEV" ] || export OVL_BASE_TEST_DIR="$TEST_DEV"
+ [ ! -d "$SCRATCH_DEV" ] || export OVL_BASE_SCRATCH_MNT="$SCRATCH_DEV"
+
+ # 2. SCRATCH/TEST_DEV point to the base fs partitions. In this case,
+ # the new OVL_BASE_SCRATCH/TEST_DEV/MNT vars are set to the values
+ # of the configured base fs and SCRATCH/TEST_DEV vars are set to the
+ # overlayfs base and mount dirs inside base fs mount.
+ [ -b "$TEST_DEV" ] || return 0
+
+ # Config file may specify base fs type, but we obay -overlay flag
+ export OVL_BASE_FSTYP="$FSTYP"
+ export FSTYP=overlay
+
+ # Store original base fs vars
+ export OVL_BASE_TEST_DEV="$TEST_DEV"
+ export OVL_BASE_TEST_DIR="$TEST_DIR"
+ export OVL_BASE_MOUNT_OPTIONS="$MOUNT_OPTIONS"
+
+ # Set TEST vars to overlay base and mount dirs inside base fs
+ export TEST_DEV="$OVL_BASE_TEST_DIR"
+ export TEST_DIR="$OVL_BASE_TEST_DIR/$OVL_MNT"
+ export MOUNT_OPTIONS="$OVERLAY_MOUNT_OPTIONS"
+
+ [ -b "$SCRATCH_DEV" ] || return 0
+
+ # Store original base fs vars
+ export OVL_BASE_SCRATCH_DEV="$SCRATCH_DEV"
+ export OVL_BASE_SCRATCH_MNT="$SCRATCH_MNT"
+
+ # Set SCRATCH vars to overlay base and mount dirs inside base fs
+ export SCRATCH_DEV="$OVL_BASE_SCRATCH_MNT"
+ export SCRATCH_MNT="$OVL_BASE_SCRATCH_MNT/$OVL_MNT"
+}
+
+_overlay_config_restore()
+{
+ export OVERLAY=true
+ [ -z "$OVL_BASE_FSTYP" ] || export FSTYP=$OVL_BASE_FSTYP
+ [ -z "$OVL_BASE_TEST_DEV" ] || export TEST_DEV=$OVL_BASE_TEST_DEV
+ [ -z "$OVL_BASE_TEST_DIR" ] || export TEST_DIR=$OVL_BASE_TEST_DIR
+ [ -z "$OVL_BASE_SCRATCH_DEV" ] || export SCRATCH_DEV=$OVL_BASE_SCRATCH_DEV
+ [ -z "$OVL_BASE_SCRATCH_MNT" ] || export SCRATCH_MNT=$OVL_BASE_SCRATCH_MNT
+ [ -z "$OVL_BASE_MOUNT_OPTIONS" ] || export MOUNT_OPTIONS=$OVL_BASE_MOUNT_OPTIONS
+}
+
+# Parse config section options. This function will parse all the configuration
+# within a single section which name is passed as an argument. For section
+# name format see comments in get_config_sections().
+# Empty lines and everything after '#' will be ignored.
+# Configuration options should be defined in the format
+#
+# CONFIG_OPTION=value
+#
+# This 'CONFIG_OPTION' variable and will be exported as an environment variable.
+parse_config_section() {
+ SECTION=$1
+ if ! $OPTIONS_HAVE_SECTIONS; then
+ return 0
+ fi
+ eval `sed -e 's/[[:space:]]*\=[[:space:]]*/=/g' \
+ -e 's/#.*$//' \
+ -e 's/[[:space:]]*$//' \
+ -e 's/^[[:space:]]*//' \
+ -e "s/^\([^=]*\)=\"\?'\?\([^\"']*\)\"\?'\?$/export \1=\"\2\"/" \
+ < $HOST_OPTIONS \
+ | sed -n -e "/^\[$SECTION\]/,/^\s*\[/{/^[^#].*\=.*/p;}"`
+}
+
get_next_config() {
+ if [ ! -z "$CONFIG_INCLUDED" ] && ! $OPTIONS_HAVE_SECTIONS; then
+ return 0
+ fi
+
+ # We might have overriden FSTYP and TEST/SCRATCH vars with overlay values
+ # in the previous section, so restore them to original values stored in
+ # OVL_BASE_*.
+ # We need to do this *before* old FSTYP and MOUNT_OPTIONS are recorded
+ # and *before* SCRATCH_DEV and MOUNT_OPTIONS are unset
+ if [ "$FSTYP" == "overlay" ]; then
+ _overlay_config_restore
+ fi
+
+ local OLD_FSTYP=$FSTYP
+ local OLD_MOUNT_OPTIONS=$MOUNT_OPTIONS
+ local OLD_TEST_FS_MOUNT_OPTS=$TEST_FS_MOUNT_OPTS
+ local OLD_MKFS_OPTIONS=$MKFS_OPTIONS
+ local OLD_FSCK_OPTIONS=$FSCK_OPTIONS
+ local OLD_USE_EXTERNAL=$USE_EXTERNAL
+
+ unset MOUNT_OPTIONS
+ unset MKFS_OPTIONS
+ unset FSCK_OPTIONS
+ unset USE_EXTERNAL
+
+ # We might have deduced SCRATCH_DEV from the SCRATCH_DEV_POOL in the previous
+ # run, so we have to unset it now.
+ if [ "$SCRATCH_DEV_NOT_SET" == "true" ]; then
+ unset SCRATCH_DEV
+ fi
+
+ parse_config_section $1
+
+ if [ ! -z "$OLD_FSTYP" ] && [ $OLD_FSTYP != $FSTYP ]; then
+ [ -z "$MOUNT_OPTIONS" ] && _mount_opts
+ [ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
+ [ -z "$MKFS_OPTIONS" ] && _mkfs_opts
+ [ -z "$FSCK_OPTIONS" ] && _fsck_opts
+
+ # clear the external devices if we are not using them
+ if [ -z "$USE_EXTERNAL" ]; then
+ unset TEST_RTDEV
+ unset TEST_LOGDEV
+ unset SCRATCH_RTDEV
+ unset SCRATCH_LOGDEV
+ fi
+ else
+ [ -z "$MOUNT_OPTIONS" ] && export MOUNT_OPTIONS=$OLD_MOUNT_OPTIONS
+ [ -z "$TEST_FS_MOUNT_OPTS" ] && export TEST_FS_MOUNT_OPTS=$OLD_TEST_FS_MOUNT_OPTS
+ [ -z "$MKFS_OPTIONS" ] && export MKFS_OPTIONS=$OLD_MKFS_OPTIONS
+ [ -z "$FSCK_OPTIONS" ] && export FSCK_OPTIONS=$OLD_FSCK_OPTIONS
+ [ -z "$USE_EXTERNAL" ] && export USE_EXTERNAL=$OLD_USE_EXTERNAL
+ fi
+
# set default RESULT_BASE
if [ -z "$RESULT_BASE" ]; then
export RESULT_BASE="$here/results/"
exit 1
fi
- echo $TEST_DEV | grep -q ":" > /dev/null 2>&1
- if [ ! -b "$TEST_DEV" -a "$?" != "0" ]; then
- echo "common/config: Error: \$TEST_DEV ($TEST_DEV) is not a block device or a NFS filesystem"
- exit 1
- fi
-
- if [ ! -d "$TEST_DIR" ]; then
- echo "common/config: Error: \$TEST_DIR ($TEST_DIR) is not a directory"
- exit 1
- fi
+ _check_device TEST_DEV required $TEST_DEV
+ export TEST_DIR=`_canonicalize_mountpoint TEST_DIR $TEST_DIR`
# a btrfs tester will set only SCRATCH_DEV_POOL, we will put first of its dev
# to SCRATCH_DEV and rest to SCRATCH_DEV_POOL to maintain the backward compatibility
if [ ! -z "$SCRATCH_DEV_POOL" ]; then
if [ ! -z "$SCRATCH_DEV" ]; then
- echo "common/config: Error: \$SCRATCH_DEV should be unset when \$SCRATCH_DEV_POOL is set"
+ echo "common/config: Error: \$SCRATCH_DEV ($SCRATCH_DEV) should be unset when \$SCRATCH_DEV_POOL ($SCRATCH_DEV_POOL) is set"
exit 1
fi
SCRATCH_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'`
+ export SCRATCH_DEV
+ export SCRATCH_DEV_NOT_SET=true
fi
- echo $SCRATCH_DEV | grep -q ":" > /dev/null 2>&1
- if [ ! -z "$SCRATCH_DEV" -a ! -b "$SCRATCH_DEV" -a "$?" != "0" ]; then
- echo "common/config: Error: \$SCRATCH_DEV ($SCRATCH_DEV) is not a block device or a NFS filesystem"
- exit 1
+ _check_device SCRATCH_DEV optional $SCRATCH_DEV
+ export SCRATCH_MNT=`_canonicalize_mountpoint SCRATCH_MNT $SCRATCH_MNT`
+
+ if [ -n "$USE_EXTERNAL" ]; then
+ _check_device TEST_RTDEV optional $TEST_RTDEV
+ _check_device TEST_LOGDEV optional $TEST_LOGDEV
+ _check_device SCRATCH_RTDEV optional $SCRATCH_RTDEV
+ _check_device SCRATCH_LOGDEV optional $SCRATCH_LOGDEV
fi
- if [ ! -z "$SCRATCH_MNT" -a ! -d "$SCRATCH_MNT" ]; then
- echo "common/config: Error: \$SCRATCH_MNT ($SCRATCH_MNT) is not a directory"
- exit 1
+ # Override FSTYP from config when running ./check -overlay
+ # and maybe override base fs TEST/SCRATCH_DEV with overlay base dirs.
+ # We need to do this *after* default mount options are set by base FSTYP
+ # and *after* SCRATCH_DEV is deduced from SCRATCH_DEV_POOL
+ if [ "$OVERLAY" == "true" -o "$FSTYP" == "overlay" ]; then
+ _overlay_config_override
fi
}
-get_next_config
+if [ -z "$CONFIG_INCLUDED" ]; then
+ get_next_config `echo $HOST_OPTIONS_SECTIONS | cut -f1 -d" "`
+ export CONFIG_INCLUDED=true
+
+ # Autodetect fs type based on what's on $TEST_DEV unless it's been set
+ # externally
+ if [ -z "$FSTYP" ] && \
+ [ "$HOSTOS" == "Linux" -o "$OSTYPE" == "linux-gnu" ] && \
+ [ ! -z "$TEST_DEV" ]; then
+ FSTYP=`blkid -c /dev/null -s TYPE -o value $TEST_DEV`
+ fi
+ FSTYP=${FSTYP:=xfs}
+ export FSTYP
+ [ -z "$MOUNT_OPTIONS" ] && _mount_opts
+ [ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
+ [ -z "$MKFS_OPTIONS" ] && _mkfs_opts
+ [ -z "$FSCK_OPTIONS" ] && _fsck_opts
+else
+ # We get here for the non multi section case, on every test that sources
+ # common/rc after re-sourcing the HOST_OPTIONS config file.
+ # Because of this re-sourcing, we need to re-canonicalize the configured
+ # mount points and re-override TEST/SCRATCH_DEV overlay vars.
+
+ # canonicalize the mount points
+ # this follows symlinks and removes all trailing "/"s
+ export TEST_DIR=`_canonicalize_mountpoint TEST_DIR $TEST_DIR`
+ export SCRATCH_MNT=`_canonicalize_mountpoint SCRATCH_MNT $SCRATCH_MNT`
+
+ # Override FSTYP from config when running ./check -overlay
+ # and maybe override base fs TEST/SCRATCH_DEV with overlay base dirs
+ if [ "$OVERLAY" == "true" -o "$FSTYP" == "overlay" ]; then
+ _overlay_config_override
+ fi
+fi
# make sure this script returns success
/bin/true
projects / xfstests-dev.git / blobdiff