#!/bin/sh
#
-# Copyright (c) 2000 Silicon Graphics, Inc. All Rights Reserved.
+# Copyright (c) 2000-2002 Silicon Graphics, Inc. All Rights Reserved.
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of version 2 of the GNU General Public License as
# configuration (you could tune this)
-EXTRA="-xfs-qa"
-BOOT="/boot"
-SOAK_PASSES="-1"
-SOAK_STRESS="10000"
-SOAK_PROC="3"
-export MKFS_OPTIONS=${MKFS_OPTIONS:=-bsize=4096}
-export MOUNT_OPTIONS=${MOUNT_OPTIONS:=-ologbufs=2}
-
_log()
{
echo "$*" >&2
echo "$*" >> $LOG
+ sync
}
_fail()
{
if [ "$started" = "1" ]
then
- echo "auto-qa stopped" | wall
- started=0
+ echo "auto-qa stopped" | wall
+ started=0
fi
_log "$*"
# send special email if a cron'd qa run fails
case $state
in
- cron*)
- mail -s "XFS QA status report" $ADMINEMAIL \
- < $LOG 2>&1
+ cron*)
+ mail -s "XFS QA status report" $EMAIL \
+ < $LOG 2>&1
;;
esac
_get_kernel_version()
{
[ -x "$WORKAREA" ] \
- || _fail "can't access workarea $WORKAREA"
+ || _fail "can't access workarea $WORKAREA"
[ -r "$WORKAREA/linux/Makefile" ] \
- || _fail "can't read makefile $WORKAREA/linux/Makefile"
+ || _fail "can't read makefile $WORKAREA/linux/Makefile"
eval `awk '
- BEGIN { FS = "[ \t=]+" }
- /^VERSION =/ { a=$2 }
- /^PATCHLEVEL =/ { b=$2 }
- /^SUBLEVEL =/ { c=$2 }
- /^EXTRAVERSION =/ { d=$2 }
+ BEGIN { FS = "[ \t=]+" }
+ /^VERSION =/ { a=$2 }
+ /^PATCHLEVEL =/ { b=$2 }
+ /^SUBLEVEL =/ { c=$2 }
+ /^EXTRAVERSION =/ { d=$2 }
END {
print "VERSION=" a "." b "." c d " ; SVERSION=" a "." b "." c
- }
+ }
' < $WORKAREA/linux/Makefile`
}
SH="/bin/sh"
LOG="$ROOT/qa.log"
-# need to add auto-qa hosts here
-
-case $HOST
-in
- bruce)
- EMAIL="nathans@larry"
- ADMINEMAIL="nathans@larry"
- MODULAR=0
- ;;
- sagan)
- EMAIL="tes@larry"
- ADMINEMAIL="tes@larry"
- MODULAR=1
- ;;
- troppo)
- EMAIL="kaos@larry"
- ADMINEMAIL="kaos@larry"
- MODULAR=0
- ;;
- frodo)
- EMAIL="nathans@larry"
- ADMINEMAIL="nathans@larry"
- MODULAR=0
- ;;
- *)
- _fail "auto-qa: no configuration information for host '$HOST'"
- ;;
-esac
-
# do some cleanup on exit
_cleanup()
umount $TEST_DEV &> /dev/null
if [ "$started" = 1 ]
then
- echo "auto-qa stopped" | wall
- started=0
+ echo "auto-qa stopped" | wall
+ started=0
fi
}
status=1
case $state
in
- *-*)
- case $new
- in
- *-*)
- _set_state $new
- ;;
- *)
- _set_state `echo $state | sed "s/-.*$/-$new/"`
- ;;
- esac
- ;;
- *)
- _set_state $new
- ;;
+ *-*)
+ case $new
+ in
+ *-*)
+ _set_state $new
+ ;;
+ *)
+ _set_state `echo $state | sed "s/-.*$/-$new/"`
+ ;;
+ esac
+ ;;
+ *)
+ _set_state $new
+ ;;
esac
}
_update_workarea()
{
if [ -z "$CVSROOT" ]; then
- _log " *** p_tupdate"
+ _log " *** p_tupdate"
cd $WORKAREA
p_tupdate 2>&1 \
- || _fail " !!! p_tupdate failed"
+ || _fail " !!! p_tupdate failed"
- _log " *** p_check/p_purge"
+ _log " *** p_check/p_purge"
cd $WORKAREA
p_check -s | p_purge -yiu 2>&1 \
- || _fail " !!! p_check/p_purge failed"
+ || _fail " !!! p_check/p_purge failed"
- _log " *** non-trunk files"
+ _log " *** non-trunk files"
cd $WORKAREA
p_list -c 2>&1 \
- || _fail " !!! p_list failed"
+ || _fail " !!! p_list failed"
else
- _log " *** cvs update"
+ _log " *** cvs update"
cd $WORKAREA
cvs -z3 update -d
fi
}
-
+
_log "*** linux-xfs QA (`date`)"
case $1
in
cron-init)
- case $state
- in
- *done)
- ;;
- *)
- _fail " !!! cron-init while not in \"*done\" state"
- ;;
- esac
- ;;
+ case $state
+ in
+ *done)
+ ;;
+ *)
+ _fail " !!! cron-init while not in \"*done\" state"
+ ;;
+ esac
+ ;;
cron-restarted)
- # we don't auto restart after reboot, but cron the restart
- # to happen a bit later - it's much easier and safer that way
- if [ "$state" != "cron-restarted" ]
- then
- _fail " !!! cron-restarted while not in \"cron-restarted\" state"
- fi
- ;;
+ # we don't auto restart after reboot, but cron the restart
+ # to happen a bit later - it's much easier and safer that way
+ if [ "$state" != "cron-restarted" ]
+ then
+ _fail " !!! cron-restarted while not in \"cron-restarted\" state"
+ fi
+ ;;
esac
if [ "$1" != "" ]
_get_state
_log " *** state $state start (`date`)"
- _log " (user=$USER, host=$HOST)"
+ _log " (user=$USER, host=$HOST)"
new_state=""
case $state
in
- *init)
- echo "" > $ROOT/qa.log
- echo "" > $ROOT/qa.full
- _log "******************************************************"
- _log "QA init $VERSION (`date`)"
- _log "******************************************************"
+ *init)
+ echo "" > $ROOT/qa.log
+ echo "" > $ROOT/qa.full
+ _log "******************************************************"
+ _log "QA init $VERSION (`date`)"
+ _log "******************************************************"
_log "--- kernel ($IMAGE)"
_log "--- modules ($MODULES)"
- _change_state "inited"
- _update_autoqa_file
- ;;
-
- *inited)
- _log " *** QA initialized"
- new_state="update"
- ;;
-
- *update)
- _update_workarea
- new_state="clean"
- ;;
-
- *clean)
- # we need to configure or else we might fail to clean
- for pkg in attr acl xfsprogs dmapi xfsdump xfstests
+ _change_state "inited"
+ _update_autoqa_file
+ ;;
+
+ *inited)
+ _log " *** QA initialized"
+ new_state="update"
+ ;;
+
+ *update)
+ _update_workarea
+ new_state="clean"
+ ;;
+
+ *clean)
+ # we need to configure or else we might fail to clean
+ for pkg in attr acl xfsprogs dmapi xfsdump xfstests
+ do
+ cd $WORKAREA/cmd/$pkg
+ _log " *** clean $pkg tools"
+ make realclean 2>&1 \
+ || _fail " !!! clean $pkg failed"
+ done
+
+ _log " *** clean linux"
+ cd $WORKAREA/linux
+ make mrproper 2>&1 \
+ || _fail " !!! clean linux failed"
+
+ _log " *** install configuration file"
+ cp -f $CONFIG $WORKAREA/linux/.config 2>&1 \
+ || _fail " !!! failed to install config"
+
+ _log " *** remove version file"
+ rm -f include/linux/version.h 2>&1 \
+ || _fail " !!! failed to clean version"
+
+ new_state="reconfig"
+ ;;
+
+ *reconfig)
+
+ _log " *** reconfig kernel"
+
+ _change_state "clean" ; # we better start from scratch if this fails
+
+ cd $WORKAREA/linux
+ # we want to use default options for any new config options.
+ echo -e "\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n" | \
+ make EXTRAVERSION=$EXTRA oldconfig 2>&1 \
+ || _fail " !!! reconfig oldconfig failed"
+ make EXTRAVERSION=$EXTRA dep 2>&1 \
+ || _fail " !!! reconfig dep failed"
+
+ new_state="buildtools"
+ ;;
+
+ *buildtools)
+ _log " *** build and install tools"
+ for pkg in attr acl xfsprogs dmapi xfsdump xfstests
do
- cd $WORKAREA/cmd/$pkg
- _log " *** clean $pkg tools"
- make realclean 2>&1 \
- || _fail " !!! clean $pkg failed"
- done
-
- _log " *** clean linux"
- cd $WORKAREA/linux
- make mrproper 2>&1 \
- || _fail " !!! clean linux failed"
-
- _log " *** install configuration file"
- cp -f $CONFIG $WORKAREA/linux/.config 2>&1 \
- || _fail " !!! failed to install config"
-
- _log " *** remove version file"
- rm -f include/linux/version.h 2>&1 \
- || _fail " !!! failed to clean version"
-
- new_state="reconfig"
- ;;
-
- *reconfig)
-
- _log " *** reconfig kernel"
-
- _change_state "clean" ; # we better start from scratch if this fails
-
- cd $WORKAREA/linux
- # we want to use default options for any new config options.
- echo -e "\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n" | \
- make EXTRAVERSION=$EXTRA oldconfig 2>&1 \
- || _fail " !!! reconfig oldconfig failed"
- make EXTRAVERSION=$EXTRA dep 2>&1 \
- || _fail " !!! reconfig dep failed"
-
- new_state="buildtools"
- ;;
-
- *buildtools)
- _log " *** build and install tools"
- for pkg in attr acl xfsprogs dmapi xfsdump xfstests
- do
- cd $WORKAREA/cmd/$pkg
-
- # use e-fence - but this will only take effect on configure
- export MALLOCLIB=/usr/lib/libefence.a
- make configure 2>&1 \
- || _fail " !!! configure $pkg failed"
- make default 2>&1 \
- || _fail " !!! build $pkg failed"
-
- _sudo make install install-dev 2>&1 \
- || _fail " !!! install $pkg failed"
+ cd $WORKAREA/cmd/$pkg
+
+ # use e-fence - but this will only take effect on configure
+ make configure 2>&1 \
+ || _fail " !!! configure $pkg failed"
+ make default 2>&1 \
+ || _fail " !!! build $pkg failed"
+
+ _sudo make install install-dev 2>&1 \
+ || _fail " !!! install $pkg failed"
# attr and acl now have install-lib targets as well
- [ "$pkg" == "attr" -o "$pkg" == "acl" ] || continue
+ [ "$pkg" = "attr" -o "$pkg" = "acl" ] || continue
_sudo make install-lib 2>&1 \
- || _fail " !!! install $pkg failed"
- done
-
- new_state="buildkernel"
- ;;
-
- *buildkernel)
- _log " *** build kernel"
-
- _change_state "clean" ; # we better start from scratch if this fails
-
- cd $WORKAREA/linux
- make -j4 EXTRAVERSION=$EXTRA bzImage modules 2>&1 \
- || _fail " !!! build bzImage/modules failed"
- new_state="install"
- ;;
-
- *install)
- _log " *** blat old modules"
-
- _sudo rm -rf $MODULES
-
- _log " *** install kernel"
- cd $WORKAREA/linux
- _sudo cp -f $WORKAREA/linux/arch/i386/boot/bzImage $IMAGE 2>&1 \
- || _fail " !!! install kernel failed"
- _sudo cp -f $WORKAREA/linux/System.map $SYSTEMMAP 2>&1 \
- || _fail " !!! install kernel failed"
- _sudo make EXTRAVERSION=$EXTRA modules_install 2>&1 \
- || _fail " !!! install modules failed"
-
- _log " *** reinit lilo"
- _sudo /sbin/lilo 2>&1 \
- || _fail " !!! reinit lilo failed"
- new_state="restart"
- ;;
-
- *restart)
- _log " *** select qa kernel"
- _sudo /sbin/lilo -R linux-xfs-qa 2>&1 \
- || _fail " !!! lilo failed"
-
- _log " *** prepare to restart"
- _change_state "restarted"
-
- _log " *** restarting"
+ || _fail " !!! install $pkg failed"
+ done
+
+ new_state="buildkernel"
+ ;;
+
+ *buildkernel)
+ _log " *** build kernel"
+
+ _change_state "clean" ; # we better start from scratch if this fails
+
+ cd $WORKAREA/linux
+ make -j4 EXTRAVERSION=$EXTRA bzImage modules 2>&1 \
+ || _fail " !!! build bzImage/modules failed"
+ new_state="install"
+ ;;
+
+ *install)
+ _log " *** blat old modules"
+
+ _sudo rm -rf $MODULES
+
+ _log " *** install kernel"
+ cd $WORKAREA/linux
+ _sudo cp -f $WORKAREA/linux/arch/i386/boot/bzImage $IMAGE 2>&1 \
+ || _fail " !!! install kernel failed"
+ _sudo cp -f $WORKAREA/linux/System.map $SYSTEMMAP 2>&1 \
+ || _fail " !!! install kernel failed"
+ _sudo make EXTRAVERSION=$EXTRA modules_install 2>&1 \
+ || _fail " !!! install modules failed"
+
+ _log " *** reinit lilo"
+ _sudo /sbin/lilo 2>&1 \
+ || _fail " !!! reinit lilo failed"
+ new_state="restart"
+ ;;
+
+ *restart)
+ _log " *** select qa kernel"
+ _sudo /sbin/lilo -R linux-xfs-qa $KERNEL_OPTIONS 2>&1 \
+ || _fail " !!! lilo failed"
+
+ _log " *** prepare to restart"
+ _change_state "restarted"
+
+ _log " *** restarting"
_restart # doesn't return
- ;;
-
- *restarted)
- _log " *** QA reentered after restart"
-
- new_state="check"
- ;;
-
- *check)
- uname=`uname -ar`
- _log " *** uname $uname"
- _log " *** user tools"
- ls -l /sbin/*xfs* /usr/sbin/*xfs* 2>&1
- _log " *** kernel"
- ls -l /boot/*$EXTRA* 2>&1
- _log " *** kernel modules"
- ls -l /lib/modules/$SVERSION$EXTRA/kernel/fs/xfs/* \
- /lib/modules/$SVERSION$EXTRA/kernel/fs/xfs_support/*
-
- if [ "$MODULAR" -eq 0 ]
- then
- new_state="reset"
- else
- new_state="probe"
- fi
- ;;
-
- *probe)
- _log " *** modules dependencies"
-
- _sudo depmod -a 2>&1 \
- || _fail " !!! failed to depmod -a"
-
- _log " *** unmounting XFS mounts"
-
- _sudo umount -a -t xfs 2>&1
-
- _log " *** removing modules"
-
- for m in xfsidbg xfs kdbm_pg kdbm_vm
- do
- _sudo rmmod $m 2> /dev/null
- done
-
- _log " *** installing modules"
+ ;;
+
+ *restarted)
+ _log " *** QA reentered after restart"
+
+ new_state="check"
+ ;;
+
+ *check)
+ uname=`uname -ar`
+ _log " *** uname $uname"
+ _log " *** user tools"
+ ls -l /sbin/*xfs* /usr/sbin/*xfs* 2>&1
+ _log " *** kernel"
+ ls -l /boot/*$EXTRA* 2>&1
+ _log " *** kernel modules"
+ ls -l /lib/modules/$SVERSION$EXTRA/kernel/fs/xfs/*
+
+ if [ "$MODULAR" -eq 0 ]
+ then
+ new_state="reset"
+ else
+ new_state="probe"
+ fi
+ ;;
+
+ *probe)
+ _log " *** modules dependencies"
+
+ _sudo depmod -a 2>&1 \
+ || _fail " !!! failed to depmod -a"
+
+ _log " *** unmounting XFS mounts"
+
+ _sudo umount -a -t xfs 2>&1
+
+ _log " *** removing modules"
+
+ for m in xfsidbg xfs kdbm_pg kdbm_vm
+ do
+ _sudo rmmod $m 2> /dev/null
+ done
+
+ _log " *** installing modules"
_sudo modprobe xfs 2>&1 \
- || _fail " !!! failed to modprobe xfs"
-
- new_state="reset"
- ;;
-
- *reset)
-
- _log " *** unmounting TEST_DEV"
-
- _sudo umount $TEST_DEV 2>&1
-
- _log " *** unmounting SCRATCH_DEV"
-
- _sudo umount $SCRATCH_DEV 2>&1
-
- _log " *** clean TEST_DEV"
-
- _sudo mkfs -t xfs -f $MKFS_OPTIONS $TEST_DEV 2>&1 \
- || _fail " !!! failed to mkfs TEST_DEV"
-
- _log " *** mounting TEST_DEV"
-
- _sudo mount -t xfs $TEST_DEV $TEST_DIR 2>&1 \
- || _fail " !!! failed to mount"
-
- new_state="run"
- ;;
-
-
- soak-run)
- cd $QADIR
-
- _log " *** run soak test"
- _sudo ./soak $SOAK_PASSES $SOAK_STRESS $SOAK_PROC\
- || _fail " !!! failed to run soak test"
-
- new_state="done"
- ;;
-
- *run)
- cd $QADIR
-
- _log " *** run tests"
- _sudo ./check -l -g auto 2>&1 | tee $ROOT/qa.out
-
- _log ""
- _log " *** send status mail"
- mail -s "XFS QA status report" $EMAIL < $ROOT/qa.out 2>&1
-
- new_state="done"
- ;;
-
- *done)
- _log "*** QA run complete"
-
- _success
- ;;
-
- *nothing)
- new_state="done"
- _log " *** do nothing"
- ;;
-
- *)
- _fail " !!! unknown state $state"
- ;;
+ || _fail " !!! failed to modprobe xfs"
+
+ new_state="reset"
+ ;;
+
+ *reset)
+
+ _log " *** unmounting TEST_DEV"
+
+ _sudo umount $TEST_DEV 2>&1
+
+ _log " *** unmounting SCRATCH_DEV"
+
+ _sudo umount $SCRATCH_DEV 2>&1
+
+ _log " *** clean TEST_DEV"
+
+ _sudo mkfs -t xfs -f $MKFS_OPTIONS $TEST_DEV 2>&1 \
+ || _fail " !!! failed to mkfs TEST_DEV"
+
+ _log " *** mounting TEST_DEV"
+
+ _sudo mount -t xfs $TEST_DEV $TEST_DIR 2>&1 \
+ || _fail " !!! failed to mount"
+
+ new_state="run"
+ ;;
+
+ soak-run)
+ cd $QADIR
+
+ _log " *** run soak test"
+ _sudo ./soak $SOAK_PASSES $SOAK_STRESS $SOAK_PROC \
+ || _fail " !!! failed to run soak test"
+
+ new_state="done"
+ ;;
+
+ bench-run)
+ cd $QADIR
+
+ _log " *** run benchmarks"
+ _sudo ./bench $BENCH_PASSES `id -nu && id -ng` \
+ || _fail " !!! failed to run benchmarks"
+
+ _log ""
+ _log " *** send results mail"
+ mail -s "XFS QA benchmark results" $EMAIL < $QADIR/bench.out 2>&1
+
+ new_state="done"
+ ;;
+
+ *run)
+ cd $QADIR
+
+ _log " *** run tests"
+ _sudo ./check -l -g auto 2>&1 | tee $ROOT/qa.out
+
+ _log ""
+ _log " *** send status mail"
+ mail -s "XFS QA status report" $EMAIL < $ROOT/qa.out 2>&1
+
+ new_state="done"
+ ;;
+
+ *done)
+ _log "*** QA run complete"
+
+ _success
+ ;;
+
+ *nothing)
+ new_state="done"
+ _log " *** do nothing"
+ ;;
+
+ *)
+ _fail " !!! unknown state $state"
+ ;;
esac
_log " *** state $state done (`date`)"