echo $raw
}
+# Serialize an integer into a CPU-endian bytestring of the given length, and
+# print it as a string where each byte is hex-escaped. For example,
+# `_num_to_hex 1000 4` == "\xe8\x03\x00\x00" if the CPU is little endian.
+_num_to_hex()
+{
+ local value=$1
+ local nbytes=$2
+ local i
+ local big_endian=$(echo -ne '\x11' | od -tx2 | head -1 | \
+ cut -f2 -d' ' | cut -c1)
+
+ if (( big_endian )); then
+ for (( i = 0; i < nbytes; i++ )); do
+ printf '\\x%02x' $(((value >> (8*(nbytes-1-i))) & 0xff))
+ done
+ else
+ for (( i = 0; i < nbytes; i++ )); do
+ printf '\\x%02x' $(((value >> (8*i)) & 0xff))
+ done
+ fi
+}
+
# Add the specified raw encryption key to the session keyring, using the
# specified key descriptor.
_add_session_encryption_key()
#
# Add the key to the session keyring. The required structure is:
#
- # #define FS_MAX_KEY_SIZE 64
+ # #define FSCRYPT_MAX_KEY_SIZE 64
# struct fscrypt_key {
- # u32 mode;
- # u8 raw[FS_MAX_KEY_SIZE];
- # u32 size;
- # } __packed;
+ # __u32 mode;
+ # __u8 raw[FSCRYPT_MAX_KEY_SIZE];
+ # __u32 size;
+ # };
#
# The kernel ignores 'mode' but requires that 'size' be 64.
#
# nice to use the common key prefix, but for now use the filesystem-
# specific prefix to make it possible to test older kernels...
#
- local big_endian=$(echo -ne '\x11' | od -tx2 | head -1 | \
- cut -f2 -d' ' | cut -c1 )
- if (( big_endian )); then
- local mode='\x00\x00\x00\x00'
- local size='\x00\x00\x00\x40'
- else
- local mode='\x00\x00\x00\x00'
- local size='\x40\x00\x00\x00'
- fi
+ local mode=$(_num_to_hex 0 4)
+ local size=$(_num_to_hex 64 4)
echo -n -e "${mode}${raw}${size}" |
$KEYCTL_PROG padd logon $FSTYP:$keydesc @s >>$seqres.full
}
_user_do "$XFS_IO_PROG -c \"enckey_status $* $keyspec\" \"$mnt\""
}
+# Require support for adding a key to a filesystem's fscrypt keyring via an
+# "fscrypt-provisioning" keyring key.
+_require_add_enckey_by_key_id()
+{
+ local mnt=$1
+
+ # Userspace support
+ _require_xfs_io_command "add_enckey" "-k"
+
+ # Kernel support
+ if $XFS_IO_PROG -c "add_enckey -k 12345" "$mnt" \
+ |& grep -q 'Invalid argument'; then
+ _notrun "Kernel doesn't support key_id parameter to FS_IOC_ADD_ENCRYPTION_KEY"
+ fi
+}
+
+# Add a key of type "fscrypt-provisioning" to the session keyring and print the
+# resulting key ID.
+_add_fscrypt_provisioning_key()
+{
+ local desc=$1
+ local type=$2
+ local raw=$3
+
+ # The format of the key payload must be:
+ #
+ # struct fscrypt_provisioning_key_payload {
+ # __u32 type;
+ # __u32 __reserved;
+ # __u8 raw[];
+ # };
+ #
+ local type_hex=$(_num_to_hex $type 4)
+ local reserved=$(_num_to_hex 0 4)
+ echo -n -e "${type_hex}${reserved}${raw}" |
+ $KEYCTL_PROG padd fscrypt-provisioning "$desc" @s
+}
+
# Retrieve the encryption nonce of the given inode as a hex string. The nonce
# was randomly generated by the filesystem and isn't exposed directly to
# userspace. But it can be read using the filesystem's debugging tools.
FSCRYPT_POLICY_FLAG_DIRECT_KEY=0x04
FSCRYPT_POLICY_FLAG_IV_INO_LBLK_64=0x08
+FSCRYPT_KEY_SPEC_TYPE_DESCRIPTOR=1
+FSCRYPT_KEY_SPEC_TYPE_IDENTIFIER=2
+
_fscrypt_mode_name_to_num()
{
local name=$1
--- /dev/null
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright 2019 Google LLC
+#
+# FS QA Test No. 593
+#
+# Test adding a key to a filesystem's fscrypt keyring via an
+# "fscrypt-provisioning" keyring key. This is an alternative to the normal
+# method where the raw key is given directly.
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/encrypt
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch_encryption -v 2
+_require_command "$KEYCTL_PROG" keyctl
+
+_new_session_keyring
+_scratch_mkfs_encrypted &>> $seqres.full
+_scratch_mount
+_require_add_enckey_by_key_id $SCRATCH_MNT
+
+test_with_policy_version()
+{
+ local vers=$1
+ local dir=$SCRATCH_MNT/dir
+ local keyid
+
+ echo
+ echo "# =========================="
+ echo "# Test with policy version $vers"
+ echo "# =========================="
+
+ case $vers in
+ 1)
+ local keytype=$FSCRYPT_KEY_SPEC_TYPE_DESCRIPTOR
+ local keyspec=$TEST_KEY_DESCRIPTOR
+ local add_enckey_args="-d $TEST_KEY_DESCRIPTOR"
+ ;;
+ 2)
+ local keytype=$FSCRYPT_KEY_SPEC_TYPE_IDENTIFIER
+ local keyspec=$TEST_KEY_IDENTIFIER
+ local add_enckey_args=""
+ ;;
+ *)
+ _fail "Unknown policy version: $vers"
+ ;;
+ esac
+
+ # First add the key in the regular way (raw key given directly), create
+ # an encrypted file with some contents, and remove the key. After this,
+ # the encrypted file should no longer be readable.
+
+ echo -e "\n# Adding key to filesystem"
+ _add_enckey $SCRATCH_MNT "$TEST_RAW_KEY" $add_enckey_args
+
+ echo -e "\n# Creating encrypted file"
+ mkdir $dir
+ _set_encpolicy $dir $keyspec
+ echo "contents" > $dir/file
+
+ echo -e "\n# Removing key from filesystem"
+ _rm_enckey $SCRATCH_MNT $keyspec
+ cat $dir/file |& _filter_scratch
+
+ # Now we should be able to add the key back via an fscrypt-provisioning
+ # key which contains the raw key, instead of providing the raw key
+ # directly. After this, the encrypted file should be readable again.
+
+ echo -e "\n# Adding fscrypt-provisioning key"
+ keyid=$(_add_fscrypt_provisioning_key $keyspec $keytype "$TEST_RAW_KEY")
+
+ echo -e "\n# Adding key to filesystem via fscrypt-provisioning key"
+ $XFS_IO_PROG -c "add_enckey -k $keyid $add_enckey_args" $SCRATCH_MNT
+
+ echo -e "\n# Reading encrypted file"
+ cat $dir/file
+
+ echo -e "\n# Cleaning up"
+ rm -rf $dir
+ _scratch_cycle_mount # Clear all keys
+}
+
+# Test with both v1 and v2 encryption policies.
+test_with_policy_version 1
+test_with_policy_version 2
+
+# Now test that invalid fscrypt-provisioning keys can't be created, that
+# fscrypt-provisioning keys can't be read back by userspace, and that the
+# filesystem only accepts properly matching fscrypt-provisioning keys.
+echo
+echo "# ================"
+echo "# Validation tests"
+echo "# ================"
+
+echo -e "\n# Adding an invalid fscrypt-provisioning key fails"
+echo "# ... bad type"
+_add_fscrypt_provisioning_key desc 0 "$TEST_RAW_KEY"
+echo "# ... bad type"
+_add_fscrypt_provisioning_key desc 10000 "$TEST_RAW_KEY"
+echo "# ... raw key too small"
+_add_fscrypt_provisioning_key desc $FSCRYPT_KEY_SPEC_TYPE_DESCRIPTOR ""
+echo "# ... raw key too large"
+_add_fscrypt_provisioning_key desc $FSCRYPT_KEY_SPEC_TYPE_DESCRIPTOR \
+ "$TEST_RAW_KEY$TEST_RAW_KEY"
+
+echo -e "\n# keyctl_read() doesn't work on fscrypt-provisioning keys"
+keyid=$(_add_fscrypt_provisioning_key desc $FSCRYPT_KEY_SPEC_TYPE_DESCRIPTOR \
+ "$TEST_RAW_KEY")
+$KEYCTL_PROG read $keyid
+$KEYCTL_PROG unlink $keyid @s
+
+echo -e "\n# Only keys with the correct fscrypt_provisioning_key_payload::type field can be added"
+echo "# ... keyring key is v1, filesystem wants v2 key"
+keyid=$(_add_fscrypt_provisioning_key desc $FSCRYPT_KEY_SPEC_TYPE_DESCRIPTOR \
+ "$TEST_RAW_KEY")
+$XFS_IO_PROG -c "add_enckey -k $keyid" $SCRATCH_MNT
+$KEYCTL_PROG unlink $keyid @s
+
+echo "# ... keyring key is v2, filesystem wants v1 key"
+keyid=$(_add_fscrypt_provisioning_key desc $FSCRYPT_KEY_SPEC_TYPE_IDENTIFIER \
+ "$TEST_RAW_KEY")
+$XFS_IO_PROG -c "add_enckey -k $keyid -d $TEST_KEY_DESCRIPTOR" $SCRATCH_MNT
+$KEYCTL_PROG unlink $keyid @s
+
+echo -e "\n# Only keys of type fscrypt-provisioning can be added"
+keyid=$(head -c 64 /dev/urandom | $KEYCTL_PROG padd logon foo:desc @s)
+$XFS_IO_PROG -c "add_enckey -k $keyid" $SCRATCH_MNT
+$KEYCTL_PROG unlink $keyid @s
+
+# success, all done
+status=0
+exit
--- /dev/null
+QA output created by 593
+
+# ==========================
+# Test with policy version 1
+# ==========================
+
+# Adding key to filesystem
+Added encryption key with descriptor 0000111122223333
+
+# Creating encrypted file
+
+# Removing key from filesystem
+Removed encryption key with descriptor 0000111122223333
+cat: SCRATCH_MNT/dir/file: No such file or directory
+
+# Adding fscrypt-provisioning key
+
+# Adding key to filesystem via fscrypt-provisioning key
+Added encryption key with descriptor 0000111122223333
+
+# Reading encrypted file
+contents
+
+# Cleaning up
+
+# ==========================
+# Test with policy version 2
+# ==========================
+
+# Adding key to filesystem
+Added encryption key with identifier 69b2f6edeee720cce0577937eb8a6751
+
+# Creating encrypted file
+
+# Removing key from filesystem
+Removed encryption key with identifier 69b2f6edeee720cce0577937eb8a6751
+cat: SCRATCH_MNT/dir/file: No such file or directory
+
+# Adding fscrypt-provisioning key
+
+# Adding key to filesystem via fscrypt-provisioning key
+Added encryption key with identifier 69b2f6edeee720cce0577937eb8a6751
+
+# Reading encrypted file
+contents
+
+# Cleaning up
+
+# ================
+# Validation tests
+# ================
+
+# Adding an invalid fscrypt-provisioning key fails
+# ... bad type
+add_key: Invalid argument
+# ... bad type
+add_key: Invalid argument
+# ... raw key too small
+add_key: Invalid argument
+# ... raw key too large
+add_key: Invalid argument
+
+# keyctl_read() doesn't work on fscrypt-provisioning keys
+keyctl_read_alloc: Operation not supported
+
+# Only keys with the correct fscrypt_provisioning_key_payload::type field can be added
+# ... keyring key is v1, filesystem wants v2 key
+Error adding encryption key: Key was rejected by service
+# ... keyring key is v2, filesystem wants v1 key
+Error adding encryption key: Key was rejected by service
+
+# Only keys of type fscrypt-provisioning can be added
+Error adding encryption key: Key was rejected by service
590 auto prealloc preallocrw
591 auto quick rw pipe splice
592 auto quick encrypt
+593 auto quick encrypt
projects / xfstests-dev.git / commitdiff