Add new test 086 for log replay with v2 logs.
Need to write more tests with varying metadata ops.
simplify
# prelim
rm -f $seq.full $tmp.*
_require_scratch
-_clear_opts
echo "*** init FS"
umount $SCRATCH_DEV >/dev/null 2>&1
cat $tmp.seq.params \
| while read mkfs mnt restofline
do
- if [ "$mkfs" != "#" ]; then
- _mkfs_log $mkfs
- _create_log $mnt
- _check_log
+ if [ "$mkfs" = "#" ]; then
+ continue
+ fi
+ export MKFS_OPTIONS=$mkfs
+ export MOUNT_OPTIONS=$mnt
+ _mkfs_log
+ _create_log
+ _check_log
- _print_operation
- _cmp_op_output $seq.op $filtered
+ _print_operation
+ _cmp_op_output $seq.op $filtered
- _print_transaction_inode 2
- _cmp_output $seq.trans_inode $filtered
+ _print_transaction_inode 2
+ _cmp_output $seq.trans_inode $filtered
- _print_transaction_buf 2
- _cmp_output $seq.trans_buf $filtered
- fi
+ _print_transaction_buf 2
+ _cmp_output $seq.trans_buf $filtered
done
# got thru it all so we may have success
-if [ ! -e $tmp.error ]; then
- status=0
-fi
+status=0
exit
QA output created by 018
*** init FS
-meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
-data = bsize=XXX blocks=XXX, imaxpct=PCT
- = sunit=XXX swidth=XXX, unwritten=X
-naming =VERN bsize=XXX
-log =LDEV bsize=XXX blocks=XXX
-realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** compare logprint: 018.op with 018.fulldir/op.mnt-ologbsize=32k.mkfs-lversion=1.filtered
*** compare logprint: 018.trans_inode with 018.fulldir/trans_inode.mnt-ologbsize=32k.mkfs-lversion=1.filtered
*** compare logprint: 018.trans_buf with 018.fulldir/trans_buf.mnt-ologbsize=32k.mkfs-lversion=1.filtered
-meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
-data = bsize=XXX blocks=XXX, imaxpct=PCT
- = sunit=XXX swidth=XXX, unwritten=X
-naming =VERN bsize=XXX
-log =LDEV bsize=XXX blocks=XXX
-realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** compare logprint: 018.op with 018.fulldir/op.mnt-ologbsize=32k.mkfs-lversion=2.filtered
*** compare logprint: 018.trans_inode with 018.fulldir/trans_inode.mnt-ologbsize=32k.mkfs-lversion=2.filtered
*** compare logprint: 018.trans_buf with 018.fulldir/trans_buf.mnt-ologbsize=32k.mkfs-lversion=2.filtered
-meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
-data = bsize=XXX blocks=XXX, imaxpct=PCT
- = sunit=XXX swidth=XXX, unwritten=X
-naming =VERN bsize=XXX
-log =LDEV bsize=XXX blocks=XXX
-realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** compare logprint: 018.op with 018.fulldir/op.mnt-ologbsize=64k.mkfs-lversion=2.filtered
*** compare logprint: 018.trans_inode with 018.fulldir/trans_inode.mnt-ologbsize=64k.mkfs-lversion=2.filtered
*** compare logprint: 018.trans_buf with 018.fulldir/trans_buf.mnt-ologbsize=64k.mkfs-lversion=2.filtered
-meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
-data = bsize=XXX blocks=XXX, imaxpct=PCT
- = sunit=XXX swidth=XXX, unwritten=X
-naming =VERN bsize=XXX
-log =LDEV bsize=XXX blocks=XXX
-realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** compare logprint: 018.op with 018.fulldir/op.mnt-ologbsize=128k.mkfs-lversion=2.filtered
*** compare logprint: 018.trans_inode with 018.fulldir/trans_inode.mnt-ologbsize=128k.mkfs-lversion=2.filtered
*** compare logprint: 018.trans_buf with 018.fulldir/trans_buf.mnt-ologbsize=128k.mkfs-lversion=2.filtered
-meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
-data = bsize=XXX blocks=XXX, imaxpct=PCT
- = sunit=XXX swidth=XXX, unwritten=X
-naming =VERN bsize=XXX
-log =LDEV bsize=XXX blocks=XXX
-realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** compare logprint: 018.op with 018.fulldir/op.mnt-ologbsize=256k.mkfs-lversion=2.filtered
*** compare logprint: 018.trans_inode with 018.fulldir/trans_inode.mnt-ologbsize=256k.mkfs-lversion=2.filtered
*** compare logprint: 018.trans_buf with 018.fulldir/trans_buf.mnt-ologbsize=256k.mkfs-lversion=2.filtered
exit
fi
-if ! src/xfsctl $SCRATCH_MNT $SCRATCH_MNT/fish >/dev/null 2>&1
+if ! src/xfsctl $SCRATCH_MNT $SCRATCH_MNT/fish >>$seq.full 2>&1
then
echo "!!! failed to run xfsctl test program"
exit
echo "*** done"
# happy exit
-rm -f $seq.full
status=0
exit 0
# prelim
rm -f $seq.full $tmp.*
_require_scratch
-_clear_opts
echo "*** init FS"
umount $SCRATCH_DEV >/dev/null 2>&1
# do a simple quota test to ensure DQUOT data is happening
-mkfs="-lversion=1"
-mnt="-ousrquota,grpquota"
-_mkfs_log $mkfs
-_create_log $mnt
+export MKFS_OPTIONS="-lversion=1"
+export MOUNT_OPTIONS="-ousrquota,grpquota"
+_mkfs_log
+_create_log
_check_log
_print_transaction_inode 2
_cmp_output $seq.ugquota.trans_inode $filtered
# got thru it all so we may have success
-if [ ! -e $tmp.error ]; then
- status=0
-fi
-
+status=0
exit
QA output created by 081
*** init FS
-meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
-data = bsize=XXX blocks=XXX, imaxpct=PCT
- = sunit=XXX swidth=XXX, unwritten=X
-naming =VERN bsize=XXX
-log =LDEV bsize=XXX blocks=XXX
-realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** compare logprint: 081.ugquota.trans_inode with 081.fulldir/trans_inode.mnt-ousrquota,grpquota.mkfs-lversion=1.filtered
*** unmount
# prelim
rm -f $seq.full $tmp.*
_require_scratch
-_clear_opts
echo "*** init FS"
umount $SCRATCH_DEV >/dev/null 2>&1
cat $tmp.seq.params \
| while read mkfs mnt start restofline
do
- if [ "$mkfs" != "#" ]; then
- echo "--- mkfs=$mkfs, mnt=$mnt, start=$start, sync=$s ---"
- _mkfs_log $mkfs
- if [ $s = "sync" ]; then
- _create_log_sync $mnt
- else
- _create_log $mnt
- fi
- _check_log
+ if [ "$mkfs" = "#" ]; then
+ continue
+ fi
+ echo "--- mkfs=$mkfs, mnt=$mnt, start=$start, sync=$s ---"
+ export MOUNT_OPTIONS=$mnt
+ export MKFS_OPTIONS=$mkfs
+ if ! _mkfs_log; then
+ continue
+ fi
+ if [ $s = "sync" ]; then
+ _create_log_sync
+ else
+ _create_log
+ fi
+ if [ $? -ne 0 ]; then
+ continue
+ fi
+ _check_log
- sync_suffix=".$s"
+ sync_suffix=".$s"
- if [ $s = "sync" ]; then
- # if sync then we have chance of DATA FORK EXTENTS items
- # not hanging around very long due to inode syncing to disk
- # (see comment in xfs_iflush_int())
- # and this is to hard to reconcile in the op output
- :
- else
- _print_operation
- _cmp_op_output $seq.op $filtered
- fi
+ if [ $s = "sync" ]; then
+ # if sync then we have chance of DATA FORK EXTENTS items
+ # not hanging around very long due to inode syncing to disk
+ # (see comment in xfs_iflush_int())
+ # and this is to hard to reconcile in the op output
+ :
+ else
+ _print_operation
+ _cmp_op_output $seq.op $filtered
+ fi
- _print_transaction_inode $start
- _cmp_output $seq.trans_inode $filtered
+ _print_transaction_inode $start
+ _cmp_output $seq.trans_inode $filtered
- _print_transaction_buf $start
- _cmp_output $seq.trans_buf $filtered
- fi
+ _print_transaction_buf $start
+ _cmp_output $seq.trans_buf $filtered
done
done
-# got thru it all so we may have success
-if [ ! -e $tmp.error ]; then
- status=0
-fi
-
+status=0
exit
QA output created by 082
*** init FS
--- mkfs=-lversion=2, mnt=-ologbsize=32k, start=2, sync=sync ---
-meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
-data = bsize=XXX blocks=XXX, imaxpct=PCT
- = sunit=XXX swidth=XXX, unwritten=X
-naming =VERN bsize=XXX
-log =LDEV bsize=XXX blocks=XXX
-realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** compare logprint: 082.trans_inode with 082.fulldir/trans_inode.mnt-ologbsize=32k.mkfs-lversion=2.sync.filtered
*** compare logprint: 082.trans_buf with 082.fulldir/trans_buf.mnt-ologbsize=32k.mkfs-lversion=2.sync.filtered
--- mkfs=-lversion=2,su=4096, mnt=-ologbsize=32k, start=8, sync=sync ---
-meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
-data = bsize=XXX blocks=XXX, imaxpct=PCT
- = sunit=XXX swidth=XXX, unwritten=X
-naming =VERN bsize=XXX
-log =LDEV bsize=XXX blocks=XXX
-realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** compare logprint: 082.trans_inode with 082.fulldir/trans_inode.mnt-ologbsize=32k.mkfs-lversion=2,su=4096.sync.filtered
*** compare logprint: 082.trans_buf with 082.fulldir/trans_buf.mnt-ologbsize=32k.mkfs-lversion=2,su=4096.sync.filtered
--- mkfs=-lversion=2,su=32768, mnt=-ologbsize=32k, start=64, sync=sync ---
-meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
-data = bsize=XXX blocks=XXX, imaxpct=PCT
- = sunit=XXX swidth=XXX, unwritten=X
-naming =VERN bsize=XXX
-log =LDEV bsize=XXX blocks=XXX
-realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** compare logprint: 082.trans_inode with 082.fulldir/trans_inode.mnt-ologbsize=32k.mkfs-lversion=2,su=32768.sync.filtered
*** compare logprint: 082.trans_buf with 082.fulldir/trans_buf.mnt-ologbsize=32k.mkfs-lversion=2,su=32768.sync.filtered
--- mkfs=-lversion=2,su=36864, mnt=-ologbsize=32k, start=72, sync=sync ---
-meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
-data = bsize=XXX blocks=XXX, imaxpct=PCT
- = sunit=XXX swidth=XXX, unwritten=X
-naming =VERN bsize=XXX
-log =LDEV bsize=XXX blocks=XXX
-realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
-mount failed: -ologbsize=32k
-(see 082.full for details)
+
+*** mount failed: -ologbsize=32k ***
+
+--- mkfs=-lversion=2,su=5120, mnt=-ologbsize=32k, start=10, sync=sync ---
+
+*** Cannot mkfs for this test using option specified: -lversion=2,su=5120 -lsize=2000b ***
+
--- mkfs=-lversion=2, mnt=-ologbsize=32k, start=2, sync=nosync ---
-meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
-data = bsize=XXX blocks=XXX, imaxpct=PCT
- = sunit=XXX swidth=XXX, unwritten=X
-naming =VERN bsize=XXX
-log =LDEV bsize=XXX blocks=XXX
-realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** compare logprint: 082.op with 082.fulldir/op.mnt-ologbsize=32k.mkfs-lversion=2.nosync.filtered
*** compare logprint: 082.trans_inode with 082.fulldir/trans_inode.mnt-ologbsize=32k.mkfs-lversion=2.nosync.filtered
*** compare logprint: 082.trans_buf with 082.fulldir/trans_buf.mnt-ologbsize=32k.mkfs-lversion=2.nosync.filtered
--- mkfs=-lversion=2,su=4096, mnt=-ologbsize=32k, start=8, sync=nosync ---
-meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
-data = bsize=XXX blocks=XXX, imaxpct=PCT
- = sunit=XXX swidth=XXX, unwritten=X
-naming =VERN bsize=XXX
-log =LDEV bsize=XXX blocks=XXX
-realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** compare logprint: 082.op with 082.fulldir/op.mnt-ologbsize=32k.mkfs-lversion=2,su=4096.nosync.filtered
*** compare logprint: 082.trans_inode with 082.fulldir/trans_inode.mnt-ologbsize=32k.mkfs-lversion=2,su=4096.nosync.filtered
*** compare logprint: 082.trans_buf with 082.fulldir/trans_buf.mnt-ologbsize=32k.mkfs-lversion=2,su=4096.nosync.filtered
--- mkfs=-lversion=2,su=32768, mnt=-ologbsize=32k, start=64, sync=nosync ---
-meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
-data = bsize=XXX blocks=XXX, imaxpct=PCT
- = sunit=XXX swidth=XXX, unwritten=X
-naming =VERN bsize=XXX
-log =LDEV bsize=XXX blocks=XXX
-realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** compare logprint: 082.op with 082.fulldir/op.mnt-ologbsize=32k.mkfs-lversion=2,su=32768.nosync.filtered
*** compare logprint: 082.trans_inode with 082.fulldir/trans_inode.mnt-ologbsize=32k.mkfs-lversion=2,su=32768.nosync.filtered
*** compare logprint: 082.trans_buf with 082.fulldir/trans_buf.mnt-ologbsize=32k.mkfs-lversion=2,su=32768.nosync.filtered
--- mkfs=-lversion=2,su=36864, mnt=-ologbsize=32k, start=72, sync=nosync ---
-meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
-data = bsize=XXX blocks=XXX, imaxpct=PCT
- = sunit=XXX swidth=XXX, unwritten=X
-naming =VERN bsize=XXX
-log =LDEV bsize=XXX blocks=XXX
-realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
-mount failed: -ologbsize=32k
-(see 082.full for details)
+
+*** mount failed: -ologbsize=32k ***
+
+--- mkfs=-lversion=2,su=5120, mnt=-ologbsize=32k, start=10, sync=nosync ---
+
+*** Cannot mkfs for this test using option specified: -lversion=2,su=5120 -lsize=2000b ***
+
*** unmount
--- /dev/null
+#! /bin/sh
+# XFS QA Test No. 086
+#
+# To test log replay with version 2 logs
+# Initially keep this simple with just creates.
+# In another qa test we can do more e.g. use fsstress.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2000-2004 Silicon Graphics, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of version 2 of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+#
+# Further, this software is distributed without any warranty that it is
+# free of the rightful claim of any third person regarding infringement
+# or the like. Any license provided herein, whether implied or
+# otherwise, applies only to this software file. Patent licenses, if
+# any, provided herein do not apply to combinations of this program with
+# other software, or any other product whatsoever.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write the Free Software Foundation, Inc., 59
+# Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+# Contact information: Silicon Graphics, Inc., 1600 Amphitheatre Pkwy,
+# Mountain View, CA 94043, or:
+#
+# http://www.sgi.com
+#
+# For further information regarding this notice, see:
+#
+# http://oss.sgi.com/projects/GenInfo/SGIGPLNoticeExplan/
+#-----------------------------------------------------------------------
+#
+# creator
+owner=root@icy.melbourne.sgi.com
+
+seq=`basename $0`
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+. ./common.log
+
+# real QA test starts here
+rm -f $seq.full $tmp.*
+_require_scratch
+
+echo "*** init FS"
+umount $SCRATCH_DEV >/dev/null 2>&1
+
+cat >$tmp.seq.params <<EOF
+# mkfs-opt mount-opt
+ -lversion=2 -ologbsize=32k
+ -lversion=2,su=4096 -ologbsize=32k
+ -lversion=2,su=32768 -ologbsize=32k
+#
+# expect following line to fail
+#
+ -lversion=2,su=36864 -ologbsize=32k
+#
+# following is not a power of 2 BBs
+#
+ -lversion=2,su=5120 -ologbsize=32k
+EOF
+
+# Do the work for various log params which
+# should not effect the data content of the log
+# Try with and without sync'ing - sync'ing will mean that
+# the log will be written out unfilled and thus the log
+# stripe can have an effect.
+#
+for s in sync nosync ; do
+ cat $tmp.seq.params \
+ | while read mkfs mnt restofline
+ do
+ if [ "$mkfs" = "#" ]; then
+ continue
+ fi
+
+ echo "--- mkfs=$mkfs, mnt=$mnt, sync=$s ---"
+ export MOUNT_OPTIONS=$mnt
+ export MKFS_OPTIONS=$mkfs
+
+ # mkfs the FS
+ _echofull "mkfs"
+ if ! _mkfs_log; then
+ _echofull "mkfs failed: $MKFS_OPTIONS"
+ continue
+ fi
+
+ # mount the FS
+ _echofull "mount"
+ if ! _scratch_mount >>$seq.full 2>&1; then
+ _echofull "mount failed: $MOUNT_OPTIONS"
+ continue
+ fi
+
+ # create the metadata
+ if [ $s = "sync" ]; then
+ # generate some log traffic - but not too much
+ # add some syncs to get the log flushed to disk
+ for file in $SCRATCH_MNT/{0,1,2,3,4,5,6,7,8,9}{0,1,2,3,4,5,6,7,8,9}; do
+ touch $file
+ sync
+ done
+ else
+ # generate some log traffic - but not too much - life gets a little
+ # more complicated if the log wraps around. This traffic is
+ # pretty much arbitary, but could probably be made better than this.
+ touch $SCRATCH_MNT/{0,1,2,3,4,5,6,7,8,9}{0,1,2,3,4,5,6,7,8,9}
+ fi
+
+ # check before on what FS should look like
+ _echofull "ls $SCRATCH_MNT"
+ ls $SCRATCH_MNT
+
+ _echofull "godown"
+ src/godown -v -f $SCRATCH_MNT >> $seq.full
+
+ _echofull "unmount"
+ umount $SCRATCH_DEV >>$seq.full 2>&1 \
+ || _fail "umount failed"
+
+ _echofull "logprint after going down..."
+ _print_logstate
+
+ _echofull "mount with replay"
+ _scratch_mount >>$seq.full 2>&1 \
+ || _fail "mount failed: $MOUNT_OPTIONS"
+
+ # check on what FS looks like after log recovery
+ _echofull "ls $SCRATCH_MNT"
+ ls $SCRATCH_MNT
+
+ _echofull "unmount"
+ umount $SCRATCH_MNT
+
+ _echofull "logprint after mount and replay..."
+ _print_logstate
+
+ if _check_scratch_fs; then
+ _echofull "filesystem is checked ok"
+ else
+ _echofull "filesystem is NOT ok"
+ fi
+ done
+done
+
+status=0
+exit
--- /dev/null
+QA output created by 086
+*** init FS
+--- mkfs=-lversion=2, mnt=-ologbsize=32k, sync=sync ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** ls /mnt/scratch ***
+
+00
+01
+02
+03
+04
+05
+06
+07
+08
+09
+10
+11
+12
+13
+14
+15
+16
+17
+18
+19
+20
+21
+22
+23
+24
+25
+26
+27
+28
+29
+30
+31
+32
+33
+34
+35
+36
+37
+38
+39
+40
+41
+42
+43
+44
+45
+46
+47
+48
+49
+50
+51
+52
+53
+54
+55
+56
+57
+58
+59
+60
+61
+62
+63
+64
+65
+66
+67
+68
+69
+70
+71
+72
+73
+74
+75
+76
+77
+78
+79
+80
+81
+82
+83
+84
+85
+86
+87
+88
+89
+90
+91
+92
+93
+94
+95
+96
+97
+98
+99
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+dirty log
+
+*** mount with replay ***
+
+
+*** ls /mnt/scratch ***
+
+00
+01
+02
+03
+04
+05
+06
+07
+08
+09
+10
+11
+12
+13
+14
+15
+16
+17
+18
+19
+20
+21
+22
+23
+24
+25
+26
+27
+28
+29
+30
+31
+32
+33
+34
+35
+36
+37
+38
+39
+40
+41
+42
+43
+44
+45
+46
+47
+48
+49
+50
+51
+52
+53
+54
+55
+56
+57
+58
+59
+60
+61
+62
+63
+64
+65
+66
+67
+68
+69
+70
+71
+72
+73
+74
+75
+76
+77
+78
+79
+80
+81
+82
+83
+84
+85
+86
+87
+88
+89
+90
+91
+92
+93
+94
+95
+96
+97
+98
+99
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+clean log
+
+*** filesystem is checked ok ***
+
+--- mkfs=-lversion=2,su=4096, mnt=-ologbsize=32k, sync=sync ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** ls /mnt/scratch ***
+
+00
+01
+02
+03
+04
+05
+06
+07
+08
+09
+10
+11
+12
+13
+14
+15
+16
+17
+18
+19
+20
+21
+22
+23
+24
+25
+26
+27
+28
+29
+30
+31
+32
+33
+34
+35
+36
+37
+38
+39
+40
+41
+42
+43
+44
+45
+46
+47
+48
+49
+50
+51
+52
+53
+54
+55
+56
+57
+58
+59
+60
+61
+62
+63
+64
+65
+66
+67
+68
+69
+70
+71
+72
+73
+74
+75
+76
+77
+78
+79
+80
+81
+82
+83
+84
+85
+86
+87
+88
+89
+90
+91
+92
+93
+94
+95
+96
+97
+98
+99
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+dirty log
+
+*** mount with replay ***
+
+
+*** ls /mnt/scratch ***
+
+00
+01
+02
+03
+04
+05
+06
+07
+08
+09
+10
+11
+12
+13
+14
+15
+16
+17
+18
+19
+20
+21
+22
+23
+24
+25
+26
+27
+28
+29
+30
+31
+32
+33
+34
+35
+36
+37
+38
+39
+40
+41
+42
+43
+44
+45
+46
+47
+48
+49
+50
+51
+52
+53
+54
+55
+56
+57
+58
+59
+60
+61
+62
+63
+64
+65
+66
+67
+68
+69
+70
+71
+72
+73
+74
+75
+76
+77
+78
+79
+80
+81
+82
+83
+84
+85
+86
+87
+88
+89
+90
+91
+92
+93
+94
+95
+96
+97
+98
+99
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+clean log
+
+*** filesystem is checked ok ***
+
+--- mkfs=-lversion=2,su=32768, mnt=-ologbsize=32k, sync=sync ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** ls /mnt/scratch ***
+
+00
+01
+02
+03
+04
+05
+06
+07
+08
+09
+10
+11
+12
+13
+14
+15
+16
+17
+18
+19
+20
+21
+22
+23
+24
+25
+26
+27
+28
+29
+30
+31
+32
+33
+34
+35
+36
+37
+38
+39
+40
+41
+42
+43
+44
+45
+46
+47
+48
+49
+50
+51
+52
+53
+54
+55
+56
+57
+58
+59
+60
+61
+62
+63
+64
+65
+66
+67
+68
+69
+70
+71
+72
+73
+74
+75
+76
+77
+78
+79
+80
+81
+82
+83
+84
+85
+86
+87
+88
+89
+90
+91
+92
+93
+94
+95
+96
+97
+98
+99
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+dirty log
+
+*** mount with replay ***
+
+
+*** ls /mnt/scratch ***
+
+00
+01
+02
+03
+04
+05
+06
+07
+08
+09
+10
+11
+12
+13
+14
+15
+16
+17
+18
+19
+20
+21
+22
+23
+24
+25
+26
+27
+28
+29
+30
+31
+32
+33
+34
+35
+36
+37
+38
+39
+40
+41
+42
+43
+44
+45
+46
+47
+48
+49
+50
+51
+52
+53
+54
+55
+56
+57
+58
+59
+60
+61
+62
+63
+64
+65
+66
+67
+68
+69
+70
+71
+72
+73
+74
+75
+76
+77
+78
+79
+80
+81
+82
+83
+84
+85
+86
+87
+88
+89
+90
+91
+92
+93
+94
+95
+96
+97
+98
+99
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+clean log
+
+*** filesystem is checked ok ***
+
+--- mkfs=-lversion=2,su=36864, mnt=-ologbsize=32k, sync=sync ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** mount failed: -ologbsize=32k ***
+
+--- mkfs=-lversion=2,su=5120, mnt=-ologbsize=32k, sync=sync ---
+
+*** mkfs ***
+
+
+*** Cannot mkfs for this test using option specified: -lversion=2,su=5120 -lsize=2000b ***
+
+
+*** mkfs failed: -lversion=2,su=5120 ***
+
+--- mkfs=-lversion=2, mnt=-ologbsize=32k, sync=nosync ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** ls /mnt/scratch ***
+
+00
+01
+02
+03
+04
+05
+06
+07
+08
+09
+10
+11
+12
+13
+14
+15
+16
+17
+18
+19
+20
+21
+22
+23
+24
+25
+26
+27
+28
+29
+30
+31
+32
+33
+34
+35
+36
+37
+38
+39
+40
+41
+42
+43
+44
+45
+46
+47
+48
+49
+50
+51
+52
+53
+54
+55
+56
+57
+58
+59
+60
+61
+62
+63
+64
+65
+66
+67
+68
+69
+70
+71
+72
+73
+74
+75
+76
+77
+78
+79
+80
+81
+82
+83
+84
+85
+86
+87
+88
+89
+90
+91
+92
+93
+94
+95
+96
+97
+98
+99
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+dirty log
+
+*** mount with replay ***
+
+
+*** ls /mnt/scratch ***
+
+00
+01
+02
+03
+04
+05
+06
+07
+08
+09
+10
+11
+12
+13
+14
+15
+16
+17
+18
+19
+20
+21
+22
+23
+24
+25
+26
+27
+28
+29
+30
+31
+32
+33
+34
+35
+36
+37
+38
+39
+40
+41
+42
+43
+44
+45
+46
+47
+48
+49
+50
+51
+52
+53
+54
+55
+56
+57
+58
+59
+60
+61
+62
+63
+64
+65
+66
+67
+68
+69
+70
+71
+72
+73
+74
+75
+76
+77
+78
+79
+80
+81
+82
+83
+84
+85
+86
+87
+88
+89
+90
+91
+92
+93
+94
+95
+96
+97
+98
+99
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+clean log
+
+*** filesystem is checked ok ***
+
+--- mkfs=-lversion=2,su=4096, mnt=-ologbsize=32k, sync=nosync ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** ls /mnt/scratch ***
+
+00
+01
+02
+03
+04
+05
+06
+07
+08
+09
+10
+11
+12
+13
+14
+15
+16
+17
+18
+19
+20
+21
+22
+23
+24
+25
+26
+27
+28
+29
+30
+31
+32
+33
+34
+35
+36
+37
+38
+39
+40
+41
+42
+43
+44
+45
+46
+47
+48
+49
+50
+51
+52
+53
+54
+55
+56
+57
+58
+59
+60
+61
+62
+63
+64
+65
+66
+67
+68
+69
+70
+71
+72
+73
+74
+75
+76
+77
+78
+79
+80
+81
+82
+83
+84
+85
+86
+87
+88
+89
+90
+91
+92
+93
+94
+95
+96
+97
+98
+99
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+dirty log
+
+*** mount with replay ***
+
+
+*** ls /mnt/scratch ***
+
+00
+01
+02
+03
+04
+05
+06
+07
+08
+09
+10
+11
+12
+13
+14
+15
+16
+17
+18
+19
+20
+21
+22
+23
+24
+25
+26
+27
+28
+29
+30
+31
+32
+33
+34
+35
+36
+37
+38
+39
+40
+41
+42
+43
+44
+45
+46
+47
+48
+49
+50
+51
+52
+53
+54
+55
+56
+57
+58
+59
+60
+61
+62
+63
+64
+65
+66
+67
+68
+69
+70
+71
+72
+73
+74
+75
+76
+77
+78
+79
+80
+81
+82
+83
+84
+85
+86
+87
+88
+89
+90
+91
+92
+93
+94
+95
+96
+97
+98
+99
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+clean log
+
+*** filesystem is checked ok ***
+
+--- mkfs=-lversion=2,su=32768, mnt=-ologbsize=32k, sync=nosync ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** ls /mnt/scratch ***
+
+00
+01
+02
+03
+04
+05
+06
+07
+08
+09
+10
+11
+12
+13
+14
+15
+16
+17
+18
+19
+20
+21
+22
+23
+24
+25
+26
+27
+28
+29
+30
+31
+32
+33
+34
+35
+36
+37
+38
+39
+40
+41
+42
+43
+44
+45
+46
+47
+48
+49
+50
+51
+52
+53
+54
+55
+56
+57
+58
+59
+60
+61
+62
+63
+64
+65
+66
+67
+68
+69
+70
+71
+72
+73
+74
+75
+76
+77
+78
+79
+80
+81
+82
+83
+84
+85
+86
+87
+88
+89
+90
+91
+92
+93
+94
+95
+96
+97
+98
+99
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+dirty log
+
+*** mount with replay ***
+
+
+*** ls /mnt/scratch ***
+
+00
+01
+02
+03
+04
+05
+06
+07
+08
+09
+10
+11
+12
+13
+14
+15
+16
+17
+18
+19
+20
+21
+22
+23
+24
+25
+26
+27
+28
+29
+30
+31
+32
+33
+34
+35
+36
+37
+38
+39
+40
+41
+42
+43
+44
+45
+46
+47
+48
+49
+50
+51
+52
+53
+54
+55
+56
+57
+58
+59
+60
+61
+62
+63
+64
+65
+66
+67
+68
+69
+70
+71
+72
+73
+74
+75
+76
+77
+78
+79
+80
+81
+82
+83
+84
+85
+86
+87
+88
+89
+90
+91
+92
+93
+94
+95
+96
+97
+98
+99
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+clean log
+
+*** filesystem is checked ok ***
+
+--- mkfs=-lversion=2,su=36864, mnt=-ologbsize=32k, sync=nosync ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** mount failed: -ologbsize=32k ***
+
+--- mkfs=-lversion=2,su=5120, mnt=-ologbsize=32k, sync=nosync ---
+
+*** mkfs ***
+
+
+*** Cannot mkfs for this test using option specified: -lversion=2,su=5120 -lsize=2000b ***
+
+
+*** mkfs failed: -lversion=2,su=5120 ***
+
echo "" >>$seq.full
}
+_echofull()
+{
+ echo "" | tee -a $seq.full
+ echo "*** $* ***" | tee -a $seq.full
+ echo "" | tee -a $seq.full
+}
+
# Handle the operations which get split over Log Record
# boundaries.
# Oper (379)..... flags: CONTINUE
| head | grep -q "<CLEAN>" || _fail "DIRTY LOG"
}
+_print_logstate()
+{
+ _scratch_xfs_logprint -t | tee -a $seq.full >$tmp.logprint
+ if grep -q "<DIRTY>" $tmp.logprint; then
+ echo "dirty log"
+ fi
+ if grep -q "<CLEAN>" $tmp.logprint; then
+ echo "clean log"
+ fi
+}
+
_print_operation()
{
- raw=$fulldir/op.mnt$mnt.mkfs$mkfs$sync_suffix.raw
- filtered=$fulldir/op.mnt$mnt.mkfs$mkfs$sync_suffix.filtered
+ raw=$fulldir/op.mnt$MOUNT_OPTIONS.mkfs$MKFS_OPTIONS$sync_suffix.raw
+ filtered=$fulldir/op.mnt$MOUNT_OPTIONS.mkfs$MKFS_OPTIONS$sync_suffix.filtered
echo "### xfs_logprint output ###" | tee $raw >$filtered
_scratch_xfs_logprint -c 2>&1 \
_print_transaction_inode()
{
_start=$1
- raw=$fulldir/trans_inode.mnt$mnt.mkfs$mkfs$sync_suffix.raw
- filtered=$fulldir/trans_inode.mnt$mnt.mkfs$mkfs$sync_suffix.filtered
+ raw=$fulldir/trans_inode.mnt$MOUNT_OPTIONS.mkfs$MKFS_OPTIONS$sync_suffix.raw
+ filtered=$fulldir/trans_inode.mnt$MOUNT_OPTIONS.mkfs$MKFS_OPTIONS$sync_suffix.filtered
echo "### xfs_logprint -t -i -s START output ###" | tee $raw >$filtered
_scratch_xfs_logprint -t -i -s $_start 2>&1 \
_print_transaction_buf()
{
_start=$1
- raw=$fulldir/trans_buf.mnt$mnt.mkfs$mkfs$sync_suffix.raw
- filtered=$fulldir/trans_buf.mnt$mnt.mkfs$mkfs$sync_suffix.filtered
+ raw=$fulldir/trans_buf.mnt$MOUNT_OPTIONS.mkfs$MKFS_OPTIONS$sync_suffix.raw
+ filtered=$fulldir/trans_buf.mnt$MOUNT_OPTIONS.mkfs$MKFS_OPTIONS$sync_suffix.filtered
echo "### xfs_logprint -t -b -s START output ###" | tee $raw >$filtered
_scratch_xfs_logprint -t -b -s $_start 2>&1 \
_mkfs_log()
{
- typeset _mkfs_opts
- _mkfs_opts=$1
-
# create the FS
_full "mkfs"
- extra_ops="-lsize=2000b $_mkfs_opts"
- _scratch_mkfs_xfs $extra_ops >$tmp.mkfs0 2>&1
- [ $? -ne 0 ] && \
- _notrun "Cannot mkfs for this test using MKFS_OPTIONS specified: $MKFS_OPTIONS $extra_ops"
- cat $tmp.mkfs0 >>$seq.full
-
- # check the mkfs settings
- _filter_mkfs <$tmp.mkfs0 2>$tmp.mkfs
- source $tmp.mkfs
- [ $dbsize -eq 4096 ] \
- || _notrun "Logprint test, tailored to 4K blocks ($dbsize in use)"
- [ $isize -eq 256 ] \
- || _notrun "Logprint test, tailored to 256b inodes ($isize in use)"
+ extra_ops="-lsize=2000b"
+ _scratch_mkfs_xfs $extra_ops >>$seq.full 2>&1
+ if [ $? -ne 0 ] ; then
+ _echofull "Cannot mkfs for this test using option specified: $MKFS_OPTIONS $extra_ops"
+ return 1
+ fi
+
+ return 0
}
#
_create_log()
{
- typeset _mnt_opts
-
- _mnt_opts=$1
-
# mount the FS
_full " mount"
- _scratch_mount $_mnt_opts >>$seq.full 2>&1 \
- || _fail "mount failed: $_mnt_opts $MOUNT_OPTIONS"
+ _scratch_mount >>$seq.full 2>&1
+ if [ $? -ne 0 ] ; then
+ _echofull "mount failed: $MOUNT_OPTIONS"
+ return 1
+ fi
# generate some log traffic - but not too much - life gets a little
# more complicated if the log wraps around. This traffic is
# unmount the FS
_full "umount"
- umount $SCRATCH_DEV >>$seq.full 2>&1 \
- || _fail "umount failed"
+ umount $SCRATCH_DEV >>$seq.full 2>&1
+ if [ $? -ne 0 ] ; then
+ _echofull "umount failed"
+ return 1
+ fi
+ return 0
}
#
#
_create_log_sync()
{
- typeset _mnt_opts
-
- _mnt_opts=$1
-
# mount the FS
_full " mount"
- _scratch_mount $_mnt_opts >>$seq.full 2>&1 \
- || _fail "mount failed: $_mnt_opts $MOUNT_OPTIONS"
+ _scratch_mount >>$seq.full 2>&1
+ if [ $? -ne 0 ] ; then
+ _echofull "mount failed: $MOUNT_OPTIONS"
+ return 1
+ fi
# generate some log traffic - but not too much
# add some syncs to get the log flushed to disk
# unmount the FS
_full "umount"
- umount $SCRATCH_DEV >>$seq.full 2>&1 \
- || _fail "umount failed"
+ umount $SCRATCH_DEV >>$seq.full 2>&1
+ if [ $? -ne 0 ] ; then
+ _echofull "umount failed"
+ return 1
+ fi
}
{
echo "*** compare logprint: $1 with $2"
if ! diff $1 $2 >/dev/null; then
- echo "FAILED: logprint output $1 differs to $2"
- touch $tmp.error
+ _fail "logprint output $1 differs to $2"
fi
}
-_clear_opts()
-{
- # clear opts
- # - remove the log options in mkfs
- # - remove the log options in mount
- # - remove the quota options in mount
- # leave any other options given
- # fix up removals when remaining -o or comma:
- # "-o blah," -> "-o blah"
- # "-o blah, -x woof" -> "-o blah -x woof"
- # "-x woof -o " -> "-x woof"
- # "-x woof -o -y wow" -> "-x woof -y wow"
- MKFS_OPTIONS=`echo $MKFS_OPTIONS | sed -e 's/-l[ ]*[^ $]*//g'`
- MOUNT_OPTIONS=`echo $MOUNT_OPTIONS |\
- sed \
- -e 's/logbsize=[^ ,]*,*//g' \
- -e 's/logbufs=[^ ,]*,*//g' \
- -e 's/usrquota,*//g' \
- -e 's/grpquota,*//g' \
- -e 's/quota,*//g' \
- -e 's/uqnoenforce,*//g' \
- -e 's/gqnoenforce,*//g' \
- -e 's/\(-o[^-,]*\), *$/\1/g' \
- -e 's/\(-o[^-,]*\), *-/\1 -/g' \
- -e 's/-o *$//g' \
- -e 's/-o *-/-/g' \
- `
-
- # export opts
- export MKFS_OPTIONS
- export MOUNT_OPTIONS
- echo "MKFS_OPTIONS = $MKFS_OPTIONS" >>$seq.full
- echo "MOUNT_OPTIONS = $MOUNT_OPTIONS" >>$seq.full
-
-}
-
#
# Op data of different Log Record sizes will mean that data is
# split at different points and in op printing it will not
diff $1 $2 >$filtered.diff
if ! _process_op_diff $filtered.diff
then
- echo "FAILED: logprint output $1 differs to $2 considering splits"
- touch $tmp.error
+ _fail "logprint output $1 differs to $2 considering splits"
fi
}
083 rw auto
084 ioctl rw auto
085 log auto
+086 log