From: Darrick J. Wong Date: Fri, 23 Mar 2018 16:54:41 +0000 (-0700) Subject: xfs: test agfl reset on bad list wrapping X-Git-Tag: v2022.05.01~1617 X-Git-Url: http://git.apps.os.sepia.ceph.com/?p=xfstests-dev.git;a=commitdiff_plain;h=e873eb9857885a84fc7a1cb9bd590241df036ecc xfs: test agfl reset on bad list wrapping From the kernel patch that this test examines ("xfs: detect agfl count corruption and reset agfl"): "The struct xfs_agfl v5 header was originally introduced with unexpected padding that caused the AGFL to operate with one less slot than intended. The header has since been packed, but the fix left an incompatibility for users who upgrade from an old kernel with the unpacked header to a newer kernel with the packed header while the AGFL happens to wrap around the end. The newer kernel recognizes one extra slot at the physical end of the AGFL that the previous kernel did not. The new kernel will eventually attempt to allocate a block from that slot, which contains invalid data, and cause a crash. "This condition can be detected by comparing the active range of the AGFL to the count. While this detects a padding mismatch, it can also trigger false positives for unrelated flcount corruption. Since we cannot distinguish a size mismatch due to padding from unrelated corruption, we can't trust the AGFL enough to simply repopulate the empty slot. "Instead, avoid unnecessarily complex detection logic and and use a solution that can handle any form of flcount corruption that slips through read verifiers: distrust the entire AGFL and reset it to an empty state. Any valid blocks within the AGFL are intentionally leaked. This requires xfs_repair to rectify (which was already necessary based on the state the AGFL was found in). The reset mitigates the side effect of the padding mismatch problem from a filesystem crash to a free space accounting inconsistency." This test exercises the reset code by mutating a fresh filesystem to contain an agfl with various list configurations of correctly wrapped, incorrectly wrapped, not wrapped, and actually corrupt free lists; then checks the success of the reset operation by fragmenting the free space btrees to exercise the agfl. Kernels without this reset fix will shut down the filesystem with corruption errors. Signed-off-by: Darrick J. Wong Reviewed-by: Brian Foster Signed-off-by: Eryu Guan --- diff --git a/common/rc b/common/rc index 93176749..6a91850c 100644 --- a/common/rc +++ b/common/rc @@ -3426,6 +3426,31 @@ _get_device_size() grep `_short_dev $1` /proc/partitions | awk '{print $3}' } +# Make sure we actually have dmesg checking set up. +_require_check_dmesg() +{ + test -w /dev/kmsg || \ + _notrun "Test requires writable /dev/kmsg." +} + +# Return the dmesg log since the start of this test. Caller must ensure that +# /dev/kmsg was writable when the test was started so that we can find the +# beginning of this test's log messages; _require_check_dmesg does this. +_dmesg_since_test_start() +{ + # search the dmesg log of last run of $seqnum for possible failures + # use sed \cregexpc address type, since $seqnum contains "/" + dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | \ + tac +} + +# check dmesg log for a specific string, subject to the same requirements as +# _dmesg_since_test_start. +_check_dmesg_for() +{ + _dmesg_since_test_start | egrep -q "$1" +} + # check dmesg log for WARNING/Oops/etc. _check_dmesg() { @@ -3439,10 +3464,7 @@ _check_dmesg() # filter out intentional WARNINGs or Oopses filter=${1:-cat} - # search the dmesg log of last run of $seqnum for possible failures - # use sed \cregexpc address type, since $seqnum contains "/" - dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | \ - tac | $filter >$seqres.dmesg + _dmesg_since_test_start | $filter >$seqres.dmesg egrep -q -e "kernel BUG at" \ -e "WARNING:" \ -e "BUG:" \ diff --git a/tests/xfs/444 b/tests/xfs/444 new file mode 100755 index 00000000..141be523 --- /dev/null +++ b/tests/xfs/444 @@ -0,0 +1,258 @@ +#! /bin/bash +# FS QA Test No. 444 +# +# Make sure XFS can fix a v5 AGFL that wraps over the last block. +# Refer to commit 96f859d52bcb ("libxfs: pack the agfl header structure so +# XFS_AGFL_SIZE is correct") for details on the original on-disk format error +# and the patch "xfs: detect agfl count corruption and reset agfl") for details +# about the fix. +# +#----------------------------------------------------------------------- +# Copyright (c) 2018 Oracle, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 +trap "_cleanup; rm -f $tmp.*; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +rm -f $seqres.full + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# real QA test starts here +_supported_fs xfs +_supported_os Linux + +_require_check_dmesg +_require_scratch +_require_test_program "punch-alternating" + +# This is only a v5 filesystem problem +_require_scratch_xfs_crc + +mount_loop() { + if ! _try_scratch_mount >> $seqres.full 2>&1; then + echo "scratch mount failed" >> $seqres.full + return + fi + + # Trigger agfl fixing by fragmenting free space enough to cause + # a bnobt split + blksz=$(_get_file_block_size ${SCRATCH_MNT}) + bno_maxrecs=$(( blksz / 8 )) + filesz=$((bno_maxrecs * 3 * blksz)) + rm -rf $SCRATCH_MNT/a + $XFS_IO_PROG -f -c "falloc 0 $filesz" $SCRATCH_MNT/a >> $seqres.full 2>&1 + test -e $SCRATCH_MNT/a && ./src/punch-alternating $SCRATCH_MNT/a + rm -rf $SCRATCH_MNT/a + + _scratch_unmount 2>&1 | _filter_scratch +} + +dump_ag0() { + _scratch_xfs_db -c 'sb 0' -c 'p' -c 'agf 0' -c 'p' -c 'agfl 0' -c 'p' +} + +runtest() { + cmd="$1" + + # Format filesystem + echo "TEST $cmd" | tee /dev/ttyprintk + echo "TEST $cmd" >> $seqres.full + _scratch_mkfs >> $seqres.full + + # Record what was here before + echo "FS BEFORE" >> $seqres.full + dump_ag0 > $tmp.before + cat $tmp.before >> $seqres.full + + sectsize=$(_scratch_xfs_get_metadata_field "sectsize" "sb 0") + flfirst=$(_scratch_xfs_get_metadata_field "flfirst" "agf 0") + fllast=$(_scratch_xfs_get_metadata_field "fllast" "agf 0") + flcount=$(_scratch_xfs_get_metadata_field "flcount" "agf 0") + + # Due to a padding bug in the original v5 struct xfs_agfl, + # XFS_AGFL_SIZE could be 36 on 32-bit or 40 on 64-bit. On a system + # with 512b sectors, this means that the AGFL length could be + # ((512 - 36) / 4) = 119 entries on 32-bit or ((512 - 40) / 4) = 118 + # entries on 64-bit. + # + # We now have code to figure out if the AGFL list wraps incorrectly + # according to the kernel's agfl size and fix it by resetting the agfl + # to zero length. Mutate ag 0's agfl to be in various configurations + # and see if we can trigger the reset. + # + # Don't hardcode the numbers, calculate them. + + # Have to have at least three agfl items to test full wrap + test "$flcount" -ge 3 || _notrun "insufficient agfl flcount" + + # mkfs should be able to make us a nice neat flfirst < fllast setup + test "$flfirst" -lt "$fllast" || _notrun "fresh agfl already wrapped?" + + bad_agfl_size=$(( (sectsize - 40) / 4 )) + good_agfl_size=$(( (sectsize - 36) / 4 )) + agfl_size= + case "$1" in + "fix_end") # fllast points to the end w/ 40-byte padding + new_flfirst=$(( bad_agfl_size - flcount )) + agfl_size=$bad_agfl_size;; + "fix_start") # flfirst points to the end w/ 40-byte padding + new_flfirst=$(( bad_agfl_size - 1)) + agfl_size=$bad_agfl_size;; + "fix_wrap") # list wraps around end w/ 40-byte padding + new_flfirst=$(( bad_agfl_size - (flcount / 2) )) + agfl_size=$bad_agfl_size;; + "start_zero") # flfirst points to the start + new_flfirst=0 + agfl_size=$good_agfl_size;; + "good_end") # fllast points to the end w/ 36-byte padding + new_flfirst=$(( good_agfl_size - flcount )) + agfl_size=$good_agfl_size;; + "good_start") # flfirst points to the end w/ 36-byte padding + new_flfirst=$(( good_agfl_size - 1 )) + agfl_size=$good_agfl_size;; + "good_wrap") # list wraps around end w/ 36-byte padding + new_flfirst=$(( good_agfl_size - (flcount / 2) )) + agfl_size=$good_agfl_size;; + "bad_start") # flfirst points off the end + new_flfirst=$good_agfl_size + agfl_size=$good_agfl_size;; + "no_move") # whatever mkfs formats (flfirst points to start) + new_flfirst=$flfirst + agfl_size=$good_agfl_size;; + "simple_move") # move list arbitrarily + new_flfirst=$((fllast + 1)) + agfl_size=$good_agfl_size;; + *) + _fail "Internal test error";; + esac + new_fllast=$(( (new_flfirst + flcount - 1) % agfl_size )) + + # Log what we're doing... + cat >> $seqres.full << ENDL +sector size: $sectsize +bad_agfl_size: $bad_agfl_size [0 - $((bad_agfl_size - 1))] +good_agfl_size: $good_agfl_size [0 - $((good_agfl_size - 1))] +agfl_size: $agfl_size +flfirst: $flfirst +fllast: $fllast +flcount: $flcount +new_flfirst: $new_flfirst +new_fllast: $new_fllast +ENDL + + # Remap the agfl blocks + echo "$((good_agfl_size - 1)) 0xffffffff" > $tmp.remap + seq "$flfirst" "$fllast" | while read f; do + list_pos=$((f - flfirst)) + dest_pos=$(( (new_flfirst + list_pos) % agfl_size )) + bno=$(_scratch_xfs_get_metadata_field "bno[$f]" "agfl 0") + echo "$dest_pos $bno" >> $tmp.remap + done + + cat $tmp.remap | while read dest_pos bno junk; do + _scratch_xfs_set_metadata_field "bno[$dest_pos]" "$bno" \ + "agfl 0" >> $seqres.full + done + + # Set new flfirst/fllast + _scratch_xfs_set_metadata_field "fllast" "$new_fllast" \ + "agf 0" >> $seqres.full + _scratch_xfs_set_metadata_field "flfirst" "$new_flfirst" \ + "agf 0" >> $seqres.full + + echo "FS AFTER" >> $seqres.full + dump_ag0 > $tmp.corrupt 2> /dev/null + diff -u $tmp.before $tmp.corrupt >> $seqres.full + + # Mount and see what happens + mount_loop + + # Did we end up with a non-wrapped list? + flfirst=$(_scratch_xfs_get_metadata_field "flfirst" "agf 0" 2>/dev/null) + fllast=$(_scratch_xfs_get_metadata_field "fllast" "agf 0" 2>/dev/null) + echo "flfirst=${flfirst} fllast=${fllast}" >> $seqres.full + if [ "${flfirst}" -ge "$((good_agfl_size - 1))" ]; then + echo "ASSERT flfirst < good_agfl_size - 1" | tee -a $seqres.full + fi + if [ "${fllast}" -ge "$((good_agfl_size - 1))" ]; then + echo "ASSERT fllast < good_agfl_size - 1" | tee -a $seqres.full + fi + if [ "${flfirst}" -ge "${fllast}" ]; then + echo "ASSERT flfirst < fllast" | tee -a $seqres.full + fi + + echo "FS MOUNTLOOP" >> $seqres.full + dump_ag0 > $tmp.mountloop 2> /dev/null + diff -u $tmp.corrupt $tmp.mountloop >> $seqres.full + + # Let's see what repair thinks + echo "REPAIR" >> $seqres.full + _scratch_xfs_repair >> $seqres.full 2>&1 + + echo "FS REPAIR" >> $seqres.full + dump_ag0 > $tmp.repair 2> /dev/null + diff -u $tmp.mountloop $tmp.repair >> $seqres.full + + # Exercise the filesystem again to make sure there aren't any lasting + # ill effects from either the agfl reset or the recommended subsequent + # repair run. + mount_loop + + echo "FS REMOUNT" >> $seqres.full + dump_ag0 > $tmp.remount 2> /dev/null + diff -u $tmp.repair $tmp.remount >> $seqres.full +} + +runtest fix_end +runtest fix_start +runtest fix_wrap +runtest start_zero +runtest good_end +runtest good_start +runtest good_wrap +runtest bad_start +runtest no_move +runtest simple_move + +# Did we get the kernel warning too? +warn_str='WARNING: Reset corrupted AGFL' +_check_dmesg_for "${warn_str}" || echo "Missing dmesg string \"${warn_str}\"." + +# Now run the regular dmesg check, filtering out the agfl warning +filter_agfl_reset_printk() { + grep -v "${warn_str}" +} +_check_dmesg filter_agfl_reset_printk + +status=0 +exit diff --git a/tests/xfs/444.out b/tests/xfs/444.out new file mode 100644 index 00000000..cbd9abcc --- /dev/null +++ b/tests/xfs/444.out @@ -0,0 +1,13 @@ +QA output created by 444 +TEST fix_end +TEST fix_start +TEST fix_wrap +TEST start_zero +TEST good_end +TEST good_start +TEST good_wrap +TEST bad_start +ASSERT flfirst < good_agfl_size - 1 +ASSERT flfirst < fllast +TEST no_move +TEST simple_move diff --git a/tests/xfs/group b/tests/xfs/group index e2397fe6..831f2cfa 100644 --- a/tests/xfs/group +++ b/tests/xfs/group @@ -441,3 +441,4 @@ 441 auto quick clone quota 442 auto stress clone quota 443 auto quick ioctl fsr +444 auto quick