]> git.apps.os.sepia.ceph.com Git - ceph.git/commitdiff
doc: Adds man page for ceph.
authorNilamdyuti Goswami <ngoswami@redhat.com>
Fri, 12 Dec 2014 20:54:41 +0000 (02:24 +0530)
committerDavid Zafman <dzafman@redhat.com>
Wed, 28 Jan 2015 02:16:22 +0000 (18:16 -0800)
Signed-off-by: Nilamdyuti Goswami <ngoswami@redhat.com>
(cherry picked from commit 76da87a64ca6b3cc0ceeaf63e19a9f440d6f4161)

doc/man/8/ceph.rst

index 65f4bed00012e389f3a73c6953d47278ca073f87..2b52df3e68108075b430c722e80d545a20f1cdbd 100644 (file)
-==========================================
- ceph -- ceph file system control utility
-==========================================
+==================================
+ ceph -- ceph administration tool
+==================================
 
 .. program:: ceph
 
 Synopsis
 ========
 
-| **ceph** [ -m *monaddr* ] [ -w | *command* ... ]
+| **ceph** **auth** *add* *<entity>* {*<caps>* [*<caps>*...]}
 
+| **ceph** **auth** *export* *<entity>*
+
+| **ceph** **config-key** *get* *<key>*
+
+| **ceph** **mds** *add_data_pool* *<pool>*
+
+| **ceph** **mds** *getmap* {*<int[0-]>*}
+
+| **ceph** **mon** *add* *<name>* <*IPaddr[:port]*>
+
+| **ceph** **mon_status**
+
+| **ceph** **osd** *create* {*<uuid>*}
+
+| **ceph** **osd** **crush** *add* *<osdname (id|osd.id)>*
+*<float[0.0-]>* *<args>* [*<args>*...]
+
+| **ceph** **pg** *force_create_pg* *<pgid>*
+
+| **ceph** **pg** *stat*
+
+| **ceph** **quorum_status**
 
 Description
 ===========
 
-**ceph** is a control utility for communicating with the monitor
-cluster of a running Ceph distributed storage system.
+**ceph** is a control utility which is used for manual deployment and maintenance
+of a Ceph cluster. It provides a diverse set of commands that allows deployment of
+monitors, OSDs, placement groups, MDS and overall maintenance, administration
+of the cluster.
+
+Commands
+========
+
+**auth**: Manage authentication keys. It is used for adding, removing, exporting
+or updating of authentication keys for a particular  entity such as a monitor or
+OSD. It uses some additional subcommands.
+
+Subcommand **add** adds authentication info for a particular entity from input
+file, or random key if no input given and/or any caps specified in the command.
+
+Usage: ceph auth add <entity> {<caps> [<caps>...]}
+
+Subcommand **caps** updates caps for **name** from caps specified in the command.
+
+Usage: ceph auth caps <entity> <caps> [<caps>...]
+
+Subcommand **del** deletes all caps for **name**.
+
+Usage: ceph auth del <entity>
+
+Subcommand **export** writes keyring for requested entity, or master keyring if
+none given.
+
+Usage: ceph auth export {<entity>}
+
+Subcommand **get** writes keyring file with requested key.
+
+Usage: ceph auth get <entity>
+
+Subcommand **get-key** displays requested key.
+
+Usage: ceph auth get-key <entity>
+
+Subcommand **get-or-create** adds authentication info for a particular entity
+from input file, or random key if no input given and/or any caps specified in the
+command.
+
+Usage: ceph auth get-or-create <entity> {<caps> [<caps>...]}
+
+Subcommand **get-or-create-key** gets or adds key for **name** from system/caps
+pairs specified in the command.  If key already exists, any given caps must match
+the existing caps for that key.
+
+Subcommand **import** reads keyring from input file.
+
+Usage: ceph auth import
+
+Subcommand **list** lists authentication state.
+
+Usage: ceph auth list
+
+Subcommand **print-key** displays requested key.
+
+Usage: ceph auth print-key <entity>
+
+Subcommand **print_key** displays requested key.
+
+Usage: ceph auth print_key <entity>
+
+**compact**: Causes compaction of monitor's leveldb storage.
+
+Usage: ceph compact
+
+**config-key**: Manage configuration key. It uses some additional subcommands.
+
+Subcommand **get** gets the configuration key.
+
+Usage: ceph config-key get <key>
+
+Subcommand **put** puts configuration key and values.
+
+Usage: ceph config-key put <key> {<val>}
+
+Subcommand **exists** checks for configuration keys existence.
+
+Usage: ceph config-key exists <key>
+
+Subcommand **list** lists configuration keys.
+
+Usage: ceph config-key list
+
+Subcommand **del** deletes configuration key.
+
+Usage: ceph config-key del <key>
+
+**df**: Show cluster's free space status.
+
+Usage: ceph df
+
+**fsid**: Show cluster's FSID/UUID.
+
+Usage: ceph fsid
+
+**health**: Show cluster's health.
+
+Usage: ceph health
+
+**heap**: Show heap usage info (available only if compiled with tcmalloc)
+
+Usage: ceph heap dump|start_profiler|stop_profiler|release|stats
+
+**injectargs**: Inject configuration arguments into monitor.
+
+Usage: ceph injectargs <injected_args> [<injected_args>...]
+
+**log**: Log supplied text to the monitor log.
+
+Usage: ceph log <logtext> [<logtext>...]
+
+**mds**: Manage metadata server configuration and administration. It uses some
+additional subcommands.
+
+Subcommand **add_data_pool** adds data pool.
+
+Usage: ceph mds add_data_pool <pool>
+
+Subcommand **cluster_down** takes mds cluster down.
+
+Usage: ceph mds cluster_down
+
+Subcommand **cluster_up** brings mds cluster up.
+
+Usage: ceph mds cluster_up
+
+Subcommand **compat** manages compatible features. It uses some additional
+subcommands.
+
+Subcommand **rm_compat** removes compatible feature.
+
+Usage: ceph mds compat rm_compat <int[0-]>
+
+Subcommand **rm_incompat** removes incompatible feature.
+
+Usage: ceph mds compat rm_incompat <int[0-]>
+
+Subcommand **show** shows mds compatibility settings.
+
+Usage: ceph mds compat show
+
+Subcommand **deactivate** stops mds.
+
+Usage: ceph mds deactivate <who>
+
+Subcommand **dump** dumps information, optionally from epoch.
+
+Usage: ceph mds dump {<int[0-]>}
+
+Subcommand **fail** forces mds to status fail.
+
+Usage: ceph mds fail <who>
+
+Subcommand **getmap** gets MDS map, optionally from epoch.
+
+Usage: ceph mds getmap {<int[0-]>}
+
+Subcommand **newfs** makes new filesystem using pools <metadata> and <data>.
+
+Usage: ceph mds newfs <int[0-]> <int[0-]> {--yes-i-really-mean-it}
+
+Subcommand **remove_data_pool** removes data pool.
+
+Usage: ceph mds remove_data_pool <pool>
+
+Subcommand **rm** removes inactive mds.
+
+Usage: ceph mds rm <int[0-]> <name> (type.id)>
+
+Subcommand **rmfailed** removes failed mds.
+
+Usage: ceph mds rmfailed <int[0-]>
+
+Subcommand **set_max_mds** sets max MDS index.
+
+Usage: ceph mds set_max_mds <int[0-]>
+
+Subcommand **set_state** sets mds state of <gid> to <numeric-state>.
+
+Usage: ceph mds set_state <int[0-]> <int[0-20]>
+
+Subcommand **setmap** sets mds map; must supply correct epoch number.
+
+Usage: ceph mds setmap <int[0-]>
+
+Subcommand **stat** shows MDS status.
+
+Usage: ceph mds stat
+
+Subcommand **stop** stops mds.
+
+Usage: ceph mds stop <who>
+
+Subcommand **tell** sends command to particular mds.
+
+Usage: ceph mds tell <who> <args> [<args>...]
+
+**mon**: Manage monitor configuration and administration. It uses some
+additional subcommands.
+
+Subcommand **add** adds new monitor named <name> at <addr>.
+
+Usage: ceph mon add <name> <IPaddr[:port]>
+
+Subcommand **dump** dumps formatted monmap (optionally from epoch)
+
+Usage: ceph mon dump {<int[0-]>}
+
+Subcommand **getmap** gets monmap.
+
+Usage: ceph mon getmap {<int[0-]>}
+
+Subcommand **remove** removes monitor named <name>.
+
+Usage: ceph mon remove <name>
+
+Subcommand **stat** summarizes monitor status.
+
+Usage: ceph mon stat
+
+Subcommand **mon_status** reports status of monitors.
+
+Usage: ceph mon_status
+
+**osd**: Manage OSD configuration and administration. It uses some additional
+subcommands.
+
+Subcommand **create** creates new osd (with optional UUID).
+
+Usage: ceph osd create {<uuid>}
+
+Subcommand **crush** is used for CRUSH management. It uses some additional
+subcommands.
+
+Subcommand **add** adds or updates crushmap position and weight for <name> with
+<weight> and location <args>.
+
+Usage: ceph osd crush add <osdname (id|osd.id)> <float[0.0-]> <args> [<args>...]
+
+Subcommand **add-bucket** adds no-parent (probably root) crush bucket <name> of
+type <type>.
+
+Usage: ceph osd crush add-bucket <name> <type>
+
+Subcommand **create-or-move** creates entry or moves existing entry for <name>
+<weight> at/to location <args>.
+
+Usage: ceph osd crush create-or-move <osdname (id|osd.id)> <float[0.0-]> <args>
+[<args>...]
+
+Subcommand **dump** dumps crush map.
+
+Usage: ceph osd crush dump
+
+Subcommand **link** links existing entry for <name> under location <args>.
+
+Usage: ceph osd crush link <name> <args> [<args>...]
+
+Subcommand **move** moves existing entry for <name> to location <args>.
+
+Usage: ceph osd crush move <name> <args> [<args>...]
+
+Subcommand **remove** removes <name> from crush map (everywhere, or just at
+<ancestor>).
+
+Usage: ceph osd crush remove <name> {<ancestor>}
+
+Subcommand **reweight** change <name>'s weight to <weight> in crush map.
+
+Usage: ceph osd crush reweight <name> <float[0.0-]>
+
+Subcommand **rm** removes <name> from crush map (everywhere, or just at
+<ancestor>).
+
+Usage: ceph osd crush rm <name> {<ancestor>}
+
+Subcommand **rule** is used for creating crush rules. It uses some additional
+subcommands.
+
+Subcommand **create-erasure** creates crush rule <name> for erasure coded pool
+created with <profile> (default default).
+
+Usage: ceph osd crush rule create-erasure <name> {<profile>}
+
+Subcommand **create-simple** creates crush rule <name> to start from <root>,
+replicate across buckets of type <type>, using a choose mode of <firstn|indep>
+(default firstn; indep best for erasure pools).
+
+Usage: ceph osd crush rule create-simple <name> <root> <type> {firstn|indep}
+
+Subcommand **dump** dumps crush rule <name> (default all).
+
+Usage: ceph osd crush rule dump {<name>}
+
+Subcommand **list** lists crush rules.
+
+Usage: ceph osd crush rule list
+
+Subcommand **ls** lists crush rules.
+
+Usage: ceph osd crush rule ls
+
+Subcommand **rm** removes crush rule <name>.
+
+Usage: ceph osd crush rule rm <name>
+
+Subcommand **set** sets crush map from input file.
+
+Usage: ceph osd crush set
+
+Subcommand **set** with osdname/osd.id update crushmap position and weight
+for <name> to <weight> with location <args>.
+
+Usage: ceph osd crush set <osdname (id|osd.id)> <float[0.0-]> <args> [<args>...]
+
+Subcommand **show-tunables** shows current crush tunables.
+
+Usage: ceph osd crush show-tunables
+
+Subcommand **tunables** sets crush tunables values to <profile>.
+
+Usage: ceph osd crush tunables legacy|argonaut|bobtail|firefly|optimal|default
+
+Subcommand **unlink** unlinks <name> from crush map (everywhere, or just at
+<ancestor>).
+
+Usage: ceph osd crush unlink <name> {<ancestor>}
+
+Subcommand **deep-scrub** initiates deep scrub on specified osd.
+
+Usage: ceph osd deep-scrub <who>
+
+Subcommand **down** sets osd(s) <id> [<id>...] down.
+
+Usage: ceph osd down <ids> [<ids>...]
+
+Subcommand **dump** prints summary of OSD map.
+
+Usage: ceph osd dump {<int[0-]>}
+
+Subcommand **erasure-code-profile** is used for managing the erasure code
+profiles. It uses some additional subcommands.
 
-There are three basic modes of operation.
+Subcommand **get** gets erasure code profile <name>.
 
-Interactive mode
-----------------
+Usage: ceph osd erasure-code-profile get <name>
 
-To start in interactive mode, no arguments are necessary. Control-d or
-'quit' will exit.
+Subcommand **ls** lists all erasure code profiles.
 
-Watch mode
-----------
+Usage: ceph osd erasure-code-profile ls
 
-Watch mode shows cluster state changes as they occur. For example::
+Subcommand **rm** removes erasure code profile <name>.
 
-       ceph -w
+Usage: ceph osd erasure-code-profile rm <name>
 
-Command line mode
------------------
+Subcommand **set** creates erasure code profile <name> with [<key[=value]> ...]
+pairs. Add a --force at the end to override an existing profile (IT IS RISKY).
 
-Finally, to send a single instruction to the monitor cluster (and wait
-for a response), the command can be specified on the command line.
+Usage: ceph osd erasure-code-profile set <name> {<profile> [<profile>...]}
 
+Subcommand **find** find osd <id> in the CRUSH map and shows its location.
+
+Usage: ceph osd find <int[0-]>
+
+Subcommand **getcrushmap** gets CRUSH map.
+
+Usage: ceph osd getcrushmap {<int[0-]>}
+
+Subcommand **getmap** gets OSD map.
+
+Usage: ceph osd getmap {<int[0-]>}
+
+Subcommand **getmaxosd** shows largest OSD id.
+
+Usage: ceph osd getmaxosd
+
+Subcommand **in** sets osd(s) <id> [<id>...] in.
+
+Usage: ceph osd in <ids> [<ids>...]
+
+Subcommand **lost** marks osd as permanently lost. THIS DESTROYS DATA IF NO
+MORE REPLICAS EXIST, BE CAREFUL.
+
+Usage: ceph osd lost <int[0-]> {--yes-i-really-mean-it}
+
+Subcommand **ls** shows all OSD ids.
+
+Usage: ceph osd ls {<int[0-]>}
+
+Subcommand **lspools** lists pools.
+
+Usage: ceph osd lspools {<int>}
+
+Subcommand **map** finds pg for <object> in <pool>.
+
+Usage: ceph osd map <poolname> <objectname>
+
+Subcommand **metadata** fetches metadata for osd <id>.
+
+Usage: ceph osd metadata <int[0-]>
+
+Subcommand **out** sets osd(s) <id> [<id>...] out.
+
+Usage: ceph osd out <ids> [<ids>...]
+
+Subcommand **pause** pauses osd.
+
+Usage: ceph osd pause
+
+Subcommand **perf** prints dump of OSD perf summary stats.
+
+Usage: ceph osd perf
+
+Subcommand **pg-temp** set pg_temp mapping pgid:[<id> [<id>...]] (developers
+only).
+
+Usage: ceph osd pg-temp <pgid> {<id> [<id>...]}
+
+Subcommand **pool** is used for managing data pools. It uses some additional
+subcommands.
+
+Subcommand **create** creates pool.
+
+Usage: ceph osd pool create <poolname> <int[0-]> {<int[0-]>} {replicated|erasure}
+{<erasure_code_profile>} {<ruleset>}
+
+Subcommand **delete** deletes pool.
+
+Usage: ceph osd pool delete <poolname> {<poolname>} {--yes-i-really-really-mean-it}
+
+Subcommand **get** gets pool parameter <var>.
+
+Usage: ceph osd pool get <poolname> size|min_size|crash_replay_interval|pg_num|
+pgp_num|crush_ruleset|hit_set_type|hit_set_period|hit_set_count|hit_set_fpp|
+
+ceph osd pool get <poolname> auid|target_max_objects|target_max_bytes
+
+ceph osd pool get <poolname> cache_target_dirty_ratio|cache_target_full_ratio
+
+ceph osd pool get <poolname> cache_min_flush_age|cache_min_evict_age|
+erasure_code_profile
+
+Subcommand **get-quota** obtains object or byte limits for pool.
+
+Usage: ceph osd pool get-quota <poolname>
+
+Subcommand **mksnap** makes snapshot <snap> in <pool>.
+
+Usage: ceph osd pool mksnap <poolname> <snap>
+
+Subcommand **rename** renames <srcpool> to <destpool>.
+
+Usage: ceph osd pool rename <poolname> <poolname>
+
+Subcommand **rmsnap** removes snapshot <snap> from <pool>.
+
+Usage: ceph osd pool rmsnap <poolname> <snap>
+
+Subcommand **set** sets pool parameter <var> to <val>.
+
+Usage: ceph osd pool set <poolname> size|min_size|crash_replay_interval|pg_num|
+pgp_num|crush_ruleset|hashpspool|hit_set_type|hit_set_period|
+
+ceph osd pool set <poolname> hit_set_count|hit_set_fpp|debug_fake_ec_pool
+
+ceph osd pool set <poolname> target_max_bytes|target_max_objects
+
+ceph osd pool set <poolname> cache_target_dirty_ratio|cache_target_full_ratio
+
+ceph osd pool set <poolname> cache_min_flush_age
+
+ceph osd pool set <poolname> cache_min_evict_age|auid <val> {--yes-i-really-mean-it}
+
+Subcommand **set-quota** sets object or byte limit on pool.
+
+Usage: ceph osd pool set-quota <poolname> max_objects|max_bytes <val>
+
+Subcommand **stats** obtain stats from all pools, or from specified pool.
+
+Usage: ceph osd pool stats {<name>}
+
+Subcommand **primary-affinity** adjust osd primary-affinity from 0.0 <=<weight>
+<= 1.0
+
+Usage: ceph osd primary-affinity <osdname (id|osd.id)> <float[0.0-1.0]>
+
+Subcommand **primary-temp** sets primary_temp mapping pgid:<id>|-1 (developers
+only).
+
+Usage: ceph osd primary-temp <pgid> <id>
+
+Subcommand **repair** initiates repair on a specified osd.
+
+Usage: ceph osd repair <who>
+
+Subcommand **reweight** reweights osd to 0.0 < <weight> < 1.0.
+
+Usage: osd reweight <int[0-]> <float[0.0-1.0]>
+
+Subcommand **reweight-by-utilization** reweight OSDs by utilization
+[overload-percentage-for-consideration, default 120].
+
+Usage: ceph osd reweight-by-utilization {<int[100-]>}
+
+Subcommand **rm** removes osd(s) <id> [<id>...] in the cluster.
+
+Usage: ceph osd rm <ids> [<ids>...]
+
+Subcommand **scrub** initiates scrub on specified osd.
+
+Usage: ceph osd scrub <who>
+
+Subcommand **set** sets <key>.
+
+Usage: ceph osd set pause|noup|nodown|noout|noin|nobackfill|norecover|noscrub|
+nodeep-scrub|notieragent
+
+Subcommand **setcrushmap** sets crush map from input file.
+
+Usage: ceph osd setcrushmap
+
+Subcommand **setmaxosd** sets new maximum osd value.
+
+Usage: ceph osd setmaxosd <int[0-]>
+
+Subcommand **stat** prints summary of OSD map.
+
+Usage: ceph osd stat
+
+Subcommand **thrash** thrashes OSDs for <num_epochs>.
+
+Usage: ceph osd thrash <int[0-]>
+
+Subcommand **tier** is used for managing tiers. It uses some additional
+subcommands.
+
+Subcommand **add** adds the tier <tierpool> (the second one) to base pool <pool>
+(the first one).
+
+Usage: ceph osd tier add <poolname> <poolname> {--force-nonempty}
+
+Subcommand **add-cache** adds a cache <tierpool> (the second one) of size <size>
+to existing pool <pool> (the first one).
+
+Usage: ceph osd tier add-cache <poolname> <poolname> <int[0-]>
+
+Subcommand **cache-mode** specifies the caching mode for cache tier <pool>.
+
+Usage: ceph osd tier cache-mode <poolname> none|writeback|forward|readonly
+
+Subcommand **remove** removes the tier <tierpool> (the second one) from base pool
+<pool> (the first one).
+
+Usage: ceph osd tier remove <poolname> <poolname>
+
+Subcommand **remove-overlay** removes the overlay pool for base pool <pool>.
+
+Usage: ceph osd tier remove-overlay <poolname>
+
+Subcommand **set-overlay** set the overlay pool for base pool <pool> to be
+<overlaypool>.
+
+Usage: ceph osd tier set-overlay <poolname> <poolname>
+
+Subcommand **tree** prints OSD tree.
+
+Usage: ceph osd tree {<int[0-]>}
+
+Subcommand **unpause** unpauses osd.
+
+Usage: ceph osd unpause
+
+Subcommand **unset** unsets <key>.
+
+Usage: osd unset pause|noup|nodown|noout|noin|nobackfill|norecover|noscrub|
+nodeep-scrub|notieragent
+
+**pg**: It is used for managing the placement groups in OSDs. It uses some
+additional subcommands.
+
+Subcommand **debug** shows debug info about pgs.
+
+Usage: ceph pg debug unfound_objects_exist|degraded_pgs_exist
+
+Subcommand **deep-scrub** starts deep-scrub on <pgid>.
+
+Usage: ceph pg deep-scrub <pgid>
+
+Subcommand **dump** shows human-readable versions of pg map (only 'all' valid with
+plain).
+
+Usage: ceph pg dump {all|summary|sum|delta|pools|osds|pgs|pgs_brief}
+
+ceph pg dump {all|summary|sum|delta|pools|osds|pgs|pgs_brief...}
+
+Subcommand **dump_json** shows human-readable version of pg map in json only.
+
+Usage: ceph pg dump_json {all|summary|sum|pools|osds|pgs[all|summary|sum|pools|
+osds|pgs...]}
+
+Subcommand **dump_pools_json** shows pg pools info in json only.
+
+Usage: ceph pg dump_pools_json
+
+Subcommand **dump_stuck** shows information about stuck pgs.
+
+Usage: ceph pg dump_stuck {inactive|unclean|stale[inactive|unclean|stale...]}
+{<int>}
+
+Subcommand **force_create_pg** forces creation of pg <pgid>.
+
+Usage: ceph pg force_create_pg <pgid>
+
+Subcommand **getmap** gets binary pg map to -o/stdout.
+
+Usage: ceph pg getmap
+
+Subcommand **map** shows mapping of pg to osds.
+
+Usage: ceph pg map <pgid>
+
+Subcommand **repair** starts repair on <pgid>.
+
+Usage: ceph pg repair <pgid>
+
+Subcommand **scrub** starts scrub on <pgid>.
+
+Usage: ceph pg scrub <pgid>
+
+Subcommand **send_pg_creates** triggers pg creates to be issued.
+
+Usage: ceph pg send_pg_creates
+
+Subcommand **set_full_ratio** sets ratio at which pgs are considered full.
+
+Usage: ceph pg set_full_ratio <float[0.0-1.0]>
+
+Subcommand **set_nearfull_ratio** sets ratio at which pgs are considered nearly
+full.
+
+Usage: ceph pg set_nearfull_ratio <float[0.0-1.0]>
+
+Subcommand **stat** shows placement group status.
+
+Usage: ceph pg stat
+
+**quorum**: Enter or exit quorum.
+
+Usage: ceph quorum enter|exit
+
+**quorum_status**: Reports status of monitor quorum.
+
+Usage: ceph quorum_status
+
+**report**: Reports full status of cluster, optional title tag strings.
+
+Usage: ceph report {<tags> [<tags>...]}
+
+**scrub**: Scrubs the monitor stores.
+
+Usage: ceph scrub
+
+**status**: Shows cluster status.
+
+Usage: ceph status
+
+**sync force**: Forces sync of and clear monitor store.
+
+Usage: ceph sync force {--yes-i-really-mean-it} {--i-know-what-i-am-doing}
+
+**tell**: Sends a command to a specific daemon.
+
+Usage: ceph tell <name (type.id)> <args> [<args>...]
 
 Options
 =======
@@ -58,30 +732,73 @@ Options
    Use ceph.conf configuration file instead of the default
    /etc/ceph/ceph.conf to determine monitor addresses during startup.
 
-.. option:: -m monaddress[:port]
+.. option:: --id CLIENT_ID, --user CLIENT_ID
 
-   Connect to specified monitor (instead of looking through ceph.conf).
+   Client id for authentication.
 
+.. option:: --name CLIENT_NAME, -n CLIENT_NAME
 
-Examples
-========
+       Client name for authentication.
+
+.. option:: --cluster CLUSTER
+
+       Name of the Ceph cluster.
+
+.. option:: --admin-daemon ADMIN_SOCKET
+
+       Submit admin-socket commands.
+
+.. option:: --admin-socket ADMIN_SOCKET_NOPE
+
+       You probably mean --admin-daemon
+
+.. option:: -s, --status
+
+       Show cluster status.
+
+.. option:: -w, --watch
+
+       Watch live cluster changes.
+
+.. option:: --watch-debug
+
+       Watch debug events.
+
+.. option:: --watch-info
+
+       Watch info events.
+
+.. option:: --watch-sec
+
+       Watch security events.
+
+.. option:: --watch-warn
+
+       Watch warning events.
+
+.. option:: --watch-error
+
+       Watch error events.
+
+.. option:: --version, -v
+
+       Display version.
 
-To grab a copy of the current OSD map::
+.. option:: --verbose
 
-       ceph -m 1.2.3.4:6789 osd getmap -o osdmap
+       Make verbose.
 
-To get a dump of placement group (PG) state::
+.. option:: --concise
 
-       ceph pg dump -o pg.txt
+       Make less verbose.
 
+.. option:: -f {json,json-pretty,xml,xml-pretty,plain}, --format
 
-Monitor commands
-================
+       Format of output.
 
-A more complete summary of commands understood by the monitor cluster can be found in the
-online documentation, at
+.. option:: --connect-timeout CLUSTER_TIMEOUT
 
-       http://ceph.com/docs/master/rados/operations/control
+       Set a timeout for connecting to the cluster.
 
 
 Availability
@@ -94,4 +811,6 @@ http://ceph.com/docs for more information.
 See also
 ========
 
-:doc:`ceph <ceph>`\(8),
+:doc:`ceph-mon <ceph-mon>`\(8),
+:doc:`ceph-osd <ceph-osd>`\(8),
+:doc:`ceph-mds <ceph-mds>`\(8)