local cmd=$2
while true ; do
- if bash -c "$cmd" ; then
- break
- fi
- sec=$(( $sec - 1 ))
- if [ $sec -eq 0 ]; then
- echo failed
- return 1
- fi
- sleep 1
+ if bash -c "$cmd" ; then
+ break
+ fi
+ sec=$(( $sec - 1 ))
+ if [ $sec -eq 0 ]; then
+ echo failed
+ return 1
+ fi
+ sleep 1
done
return 0
}
function power2() { echo "x=l($1)/l(2); scale=0; 2^((x+0.5)/1)" | bc -l;}
+function eval_actual_expected_val() {
+ local actual_value=$1
+ local expected_value=$2
+ if [[ $actual_value = $expected_value ]]
+ then
+ echo "Success: " $actual_value "=" $expected_value
+ else
+ echo "Error: " $actual_value "!=" $expected_value
+ exit 1
+ fi
+}
+
# enable
-ceph config set mgr mgr/pg_autoscaler/sleep_interval 5
+ceph config set mgr mgr/pg_autoscaler/sleep_interval 60
ceph mgr module enable pg_autoscaler
+# ceph config set global osd_pool_default_pg_autoscale_mode on
# pg_num_min
-ceph osd pool create a 16 --pg-num-min 4
-ceph osd pool create b 16 --pg-num-min 2
-ceph osd pool set a pg_autoscale_mode on
-ceph osd pool set b pg_autoscale_mode on
+ceph osd pool create meta0 16
+ceph osd pool create bulk0 16 --bulk
+ceph osd pool create bulk1 16 --bulk
+ceph osd pool create bulk2 16 --bulk
+ceph osd pool set meta0 pg_autoscale_mode on
+ceph osd pool set bulk0 pg_autoscale_mode on
+ceph osd pool set bulk1 pg_autoscale_mode on
+ceph osd pool set bulk2 pg_autoscale_mode on
+# set pool size
+ceph osd pool set meta0 size 2
+ceph osd pool set bulk0 size 2
+ceph osd pool set bulk1 size 2
+ceph osd pool set bulk2 size 2
# get num pools again since we created more pools
NUM_POOLS=$(ceph osd pool ls | wc -l)
-# get profiles of pool a and b
-PROFILE1=$(ceph osd pool autoscale-status | grep 'a' | grep -o -m 1 'scale-up\|scale-down' || true)
-PROFILE2=$(ceph osd pool autoscale-status | grep 'b' | grep -o -m 1 'scale-up\|scale-down' || true)
-
-# evaluate the default profile a
-if [[ $PROFILE1 = "scale-up" ]]
-then
- echo "Success: pool a PROFILE is scale-up"
-else
- echo "Error: a PROFILE is scale-down"
- exit 1
-fi
-
-# evaluate the default profile of pool b
-if [[ $PROFILE2 = "scale-up" ]]
-then
- echo "Success: pool b PROFILE is scale-up"
-else
- echo "Error: b PROFILE is scale-down"
- exit 1
-fi
+# get bulk flag of each pool through the command ceph osd pool autoscale-status
+BULK_FLAG_1=$(ceph osd pool autoscale-status | grep 'meta0' | grep -o -m 1 'True\|False' || true)
+BULK_FLAG_2=$(ceph osd pool autoscale-status | grep 'bulk0' | grep -o -m 1 'True\|False' || true)
+BULK_FLAG_3=$(ceph osd pool autoscale-status | grep 'bulk1' | grep -o -m 1 'True\|False' || true)
+BULK_FLAG_4=$(ceph osd pool autoscale-status | grep 'bulk2' | grep -o -m 1 'True\|False' || true)
-# This part of this code will now evaluate the accuracy of
-# scale-down profile
+# evaluate the accuracy of ceph osd pool autoscale-status specifically the `BULK` column
-# change to scale-down profile
-ceph osd pool set autoscale-profile scale-down
+eval_actual_expected_val $BULK_FLAG_1 'False'
+eval_actual_expected_val $BULK_FLAG_2 'True'
+eval_actual_expected_val $BULK_FLAG_3 'True'
+eval_actual_expected_val $BULK_FLAG_4 'True'
-# get profiles of pool a and b
-PROFILE1=$(ceph osd pool autoscale-status | grep 'a' | grep -o -m 1 'scale-up\|scale-down' || true)
-PROFILE2=$(ceph osd pool autoscale-status | grep 'b' | grep -o -m 1 'scale-up\|scale-down' || true)
-
-# evaluate that profile a is now scale-down
-if [[ $PROFILE1 = "scale-down" ]]
-then
- echo "Success: pool a PROFILE is scale-down"
-else
- echo "Error: a PROFILE is scale-up"
- exit 1
-fi
-
-# evaluate the profile of b is now scale-down
-if [[ $PROFILE2 = "scale-down" ]]
-then
- echo "Success: pool b PROFILE is scale-down"
-else
- echo "Error: b PROFILE is scale-up"
- exit 1
-fi
+# This part of this code will now evaluate the accuracy of the autoscaler
# get pool size
-POOL_SIZE_A=$(ceph osd pool get a size| grep -Eo '[0-9]{1,4}')
-POOL_SIZE_B=$(ceph osd pool get b size| grep -Eo '[0-9]{1,4}')
-
-# calculate target pg of each pools
-TARGET_PG_A=$(power2 $((($NUM_OSDS * 100)/($NUM_POOLS)/($POOL_SIZE_A))))
-TARGET_PG_B=$(power2 $((($NUM_OSDS * 100)/($NUM_POOLS)/($POOL_SIZE_B))))
+POOL_SIZE_1=$(ceph osd pool get meta0 size| grep -Eo '[0-9]{1,4}')
+POOL_SIZE_2=$(ceph osd pool get bulk0 size| grep -Eo '[0-9]{1,4}')
+POOL_SIZE_3=$(ceph osd pool get bulk1 size| grep -Eo '[0-9]{1,4}')
+POOL_SIZE_4=$(ceph osd pool get bulk2 size| grep -Eo '[0-9]{1,4}')
+
+# Calculate target pg of each pools
+# First Pool is a non-bulk so we do it first.
+# Since the Capacity ratio = 0 we first meta pool remains the same pg_num
+
+TARGET_PG_1=$(ceph osd pool get meta0 pg_num| grep -Eo '[0-9]{1,4}')
+PG_LEFT=$NUM_OSDS*100
+NUM_POOLS_LEFT=$NUM_POOLS-1
+# Rest of the pool is bulk and even pools so pretty straight forward
+# calculations.
+TARGET_PG_2=$(power2 $((($PG_LEFT)/($NUM_POOLS_LEFT)/($POOL_SIZE_2))))
+TARGET_PG_3=$(power2 $((($PG_LEFT)/($NUM_POOLS_LEFT)/($POOL_SIZE_3))))
+TARGET_PG_4=$(power2 $((($PG_LEFT)/($NUM_POOLS_LEFT)/($POOL_SIZE_4))))
# evaluate target_pg against pg num of each pools
-wait_for 120 "ceph osd pool get a pg_num | grep $TARGET_PG_A"
-wait_for 120 "ceph osd pool get b pg_num | grep $TARGET_PG_B"
+wait_for 300 "ceph osd pool get meta0 pg_num | grep $TARGET_PG_1"
+wait_for 300 "ceph osd pool get bulk0 pg_num | grep $TARGET_PG_2"
+wait_for 300 "ceph osd pool get bulk1 pg_num | grep $TARGET_PG_3"
+wait_for 300 "ceph osd pool get bulk2 pg_num | grep $TARGET_PG_4"
# target ratio
-ceph osd pool set a target_size_ratio 5
-ceph osd pool set b target_size_ratio 1
-sleep 10
+ceph osd pool set meta0 target_size_ratio 5
+ceph osd pool set bulk0 target_size_ratio 1
+sleep 60
APGS=$(ceph osd dump -f json-pretty | jq '.pools[0].pg_num_target')
BPGS=$(ceph osd dump -f json-pretty | jq '.pools[1].pg_num_target')
test $APGS -gt 100
test $BPGS -gt 10
# small ratio change does not change pg_num
-ceph osd pool set a target_size_ratio 7
-ceph osd pool set b target_size_ratio 2
-sleep 10
+ceph osd pool set meta0 target_size_ratio 7
+ceph osd pool set bulk0 target_size_ratio 2
+sleep 60
APGS2=$(ceph osd dump -f json-pretty | jq '.pools[0].pg_num_target')
BPGS2=$(ceph osd dump -f json-pretty | jq '.pools[1].pg_num_target')
test $APGS -eq $APGS2
test $BPGS -eq $BPGS2
# target_size
-ceph osd pool set a target_size_bytes 1000000000000000
-ceph osd pool set b target_size_bytes 1000000000000000
-ceph osd pool set a target_size_ratio 0
-ceph osd pool set b target_size_ratio 0
+ceph osd pool set meta0 target_size_bytes 1000000000000000
+ceph osd pool set bulk0 target_size_bytes 1000000000000000
+ceph osd pool set meta0 target_size_ratio 0
+ceph osd pool set bulk0 target_size_ratio 0
wait_for 60 "ceph health detail | grep POOL_TARGET_SIZE_BYTES_OVERCOMMITTED"
-ceph osd pool set a target_size_bytes 1000
-ceph osd pool set b target_size_bytes 1000
-ceph osd pool set a target_size_ratio 1
+ceph osd pool set meta0 target_size_bytes 1000
+ceph osd pool set bulk0 target_size_bytes 1000
+ceph osd pool set meta0 target_size_ratio 1
wait_for 60 "ceph health detail | grep POOL_HAS_TARGET_SIZE_BYTES_AND_RATIO"
-ceph osd pool rm a a --yes-i-really-really-mean-it
-ceph osd pool rm b b --yes-i-really-really-mean-it
+ceph osd pool rm meta0 meta0 --yes-i-really-really-mean-it
+ceph osd pool rm bulk0 bulk0 --yes-i-really-really-mean-it
+ceph osd pool rm bulk1 bulk1 --yes-i-really-really-mean-it
+ceph osd pool rm bulk2 bulk2 --yes-i-really-really-mean-it
echo OK
+
projects / ceph.git / commitdiff