Merge pull request #4936 from ceph/wip-11975-hammer

mon crashes when "ceph osd tree 85 --format json"

Reviewed-by: Kefu Chai <kchai@redhat.com>

Merge pull request #4892 from theanalyst/wip-11760-hammer

ceph-disk: get_partition_type fails on /dev/cciss...

Reviewed-by: Loic Dachary <ldachary@redhat.com>

Merge pull request #4877 from SUSE/wip-11902-hammer

admin/build-doc: script fails silently under certain circumstances

Reviewed-by: Loic Dachary <ldachary@redhat.com>

mon: add "--check" to CrushTester::test_with_crushtool()

so we don't need to call CrushTester::check_name_maps() in OSDMonitor.cc
anymore.

Fixes: #11680
Signed-off-by: Kefu Chai <kchai@redhat.com>
(cherry picked from commit c6e634875316cf17368d497e6dc4f6f4b5dd65d2)

crushtool: rename "--check-names" to "--check"

* because "--check" also checks for the max_id

Note: edited since we do not have the fix introduced in 46103b2 in
      hammer.

Signed-off-by: Kefu Chai <kchai@redhat.com>
(cherry picked from commit 9381d53acdce85fcbff828926b911e050ba36e51)

mon: check the new crush map against osdmap.max_osd

Fixes: #11680
Signed-off-by: Kefu Chai <kchai@redhat.com>
(cherry picked from commit 22e6bd6e01d5df3f3e897562597e22ca1737f8c8)

crushtool: enable check against max_id

add an argument "max_id" for "--check-names" to check if any item
has an id greater or equal to given "max_id" in crush map.

Note: edited since we do not have the fix introduced in 46103b2 in
      hammer.

Signed-off-by: Kefu Chai <kchai@redhat.com>
(cherry picked from commit d0658dd3cdf072b2a7c2a1986f8785a697c591ee)

crush/CrushTester: check if any item id is too large

Signed-off-by: Kefu Chai <kchai@redhat.com>
(cherry picked from commit e640d89240017956b8c7411babb86be0f1e2b172)

mon: validate new crush for unknown names

* the "osd tree dump" command enumerates all buckets/osds found in either the
  crush map or the osd map. but the newly set crushmap is not validated for
  the dangling references, so we need to check to see if any item in new crush
  map is referencing unknown type/name when a new crush map is sent to
  monitor, reject it if any.

Fixes: #11680
Signed-off-by: Kefu Chai <kchai@redhat.com>
(cherry picked from commit a955f36a509e5412b1f72632a1a956d99e768e35)

crushtool: add the "--check-names" option

* so one is able to verify that the "ceph osd tree" won't chock on the
  new crush map because of dangling name/type references

Signed-off-by: Kefu Chai <kchai@redhat.com>
(cherry picked from commit d6b46d4c7b722945ce24ac2930381a109b1e3dda)

crush/CrushTester: add check_name_maps() method

* check for dangling bucket name or type names referenced by the
  buckets/items in the crush map.
* also check for the references from Item(0, 0, 0) which does not
  necessarily exist in the crush map under testing. the rationale
  behind this is: the "ceph osd tree" will also print stray OSDs
  whose id is greater or equal to 0. so it would be useful to
  check if the crush map offers the type name indexed by "0"
  (the name of OSDs is always "OSD.{id}", so we don't need to
  look up the name of an OSD item in the crushmap).

Signed-off-by: Kefu Chai <kchai@redhat.com>
(cherry picked from commit b75384d73958faf81d45847a7dfa56f4fa347e6f)

Merge pull request #4667 from SUSE/wip-11611-hammer

ceph.spec: update OpenSUSE BuildRequires

Reviewed-by: Loic Dachary <ldachary@redhat.com>

Merge pull request #5123 from theanalyst/wip-11979-hammer

MDSMonitor: handle MDSBeacon messages properly

Reviewed-by: Kefu Chai <kchai@redhat.com>

Merge pull request #4862 from SUSE/wip-11874-hammer

Bucket header is enclosed by quotes

Reviewed-by: Yehuda Sadeh <yehuda@redhat.com>

Merge pull request #4885 from theanalyst/wip-11755-hammer

Object copy bug

Reviewed-by: Yehuda Sadeh <yehuda@redhat.com>

Merge pull request #4884 from theanalyst/wip-11722-hammer

Keystone PKI token expiration is not enforced

Reviewed-by: Yehuda Sadeh <yehuda@redhat.com>

Merge pull request #4875 from ceph/wip-11770-hammer

librbd: aio calls may block

Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Loic Dachary <ldachary@redhat.com>

mon: always reply mdsbeacon

the MDS (Beacon) is always expecting the reply for the mdsbeacon messages from
the lead mon, and it uses the delay as a metric for the laggy-ness of the
Beacon. when it comes to the MDSMonitor on a peon, it will remove the route
session at seeing a reply (route message) from leader, so a reply to
mdsbeacon will stop the peon from resending the mdsbeacon request to the
leader.

if the MDSMonitor re-forwards the unreplied requests after they are
outdated, there are chances that the requests reflecting old and even wrong
state of the MDSs mislead the lead monitor. for example, the MDSs which sent
the outdated messages could be dead.

Fixes: #11590
Signed-off-by: Kefu Chai <kchai@redhat.com>
(cherry picked from commit b3555e9c328633c9e1fbc27d652c004b30535e5b)

mon/MDSMonitor: rename labels to a better name

* s/ignore/reply/
* s/out/ignore/

Signed-off-by: Kefu Chai <kchai@redhat.com>
(cherry picked from commit f00ecb8b3df73ce6337985bc6d43bce5143ee537)

mon: send no_reply() to peon to drop ignored mdsbeacon

so the peon can remove the ignored mdsbeacon request from the
routed_requets at seeing this reply, and hence no longer resend the
request.

Fixes: #11590
Signed-off-by: Kefu Chai <kchai@redhat.com>
(cherry picked from commit 72a37b3a8e145d8522ea67fc14ce2c5510b6852b)

mon: remove unnecessary error handling

msg.get_session() should always return a non-zero pointer in
Monitor.dispatch()

Signed-off-by: Kefu Chai <kchai@redhat.com>
(cherry picked from commit 16e8e2cc82a90c49cd8aa3d0e3acc4694ba659a0)

Merge pull request #4886 from theanalyst/wip-11737-hammer

Reviewed-by: Greg Farnum <gfarnum@redhat.com>

Merge pull request #5095 from ceph/wip-fix-doc-hammer

doc: fix doc build

Reviewed-by: Loic Dachary <ldachary@redhat.com>

doc: add the corresponding @endcond command for @cond

* they are used to applease asphyxiate, as it
  is not able to handle "enum" sections

Signed-off-by: Kefu Chai <kchai@redhat.com>

doc: remove orphan: directive in ceph-create-keys.rst

* it is used to silence the sphinx warning, but conf.py
  does not like it.

Signed-off-by: Kefu Chai <kchai@redhat.com>

doc: let doxygen ignore src/tracing

Signed-off-by: Kefu Chai <kchai@redhat.com>

Merge pull request #4902 from theanalyst/wip-11908-hammer

Fixes for rados ops with snaps

Reviewed-by: Samuel Just <sjust@redhat.com>

Merge pull request #5069 from dachary/wip-11806-hammer

ceph / ceph-dbg steal ceph-objecstore-tool from ceph-test / ceph-test-dbg

Reviewed-by: Ken Dreyer <kdreyer@redhat.com>

debian: ceph-dbg steals ceph-objectstore-tool from ceph-test-dbg (take 2)

968573b8930a7c8485bf53e3a989ce2f7d0a2fff incorrectly backported
6f11fbf41fab10924b1e0e41fcf27864779d4073. It should instead reflect that
ceph-dbg in 0.94.2 and above will break ceph-test-dbg in all versions
prior to 0.94.2.

In other words, 0.94-XXXX being lower than 0.94.1, upgrading from
0.94.1 to 0.94.2 will not notice that ceph-dbg breaks ceph-test-dbg.

$ dpkg --compare-versions 0.94-XXXX lt 0.94.1 && echo yes || echo no
yes
$ dpkg --compare-versions 0.94.2 lt 0.94.1-xxx && echo yes || echo no
no

http://tracker.ceph.com/issues/11806 Fixes: #11806

Signed-off-by: Loic Dachary <loic@dachary.org>

qa/workunits/rados/test-upgarde-v9.0.1: fix exclude syntax

It's -, then a list of all exclusions separated by :.  There are just 2.

Signed-off-by: Sage Weil <sage@redhat.com>

qa/workunits/rados/test-upgrade-v9.0.1: skip one more evict test

Signed-off-by: Sage Weil <sage@redhat.com>

qa: add compatibility filtered rados api tests for upgrades

Post-9.0.1, the evict op returns success when an object doesn't exist
in the cache tier. Skip the tests that are incompatible across
versions.

Fixes: #11548
Signed-off-by: Josh Durgin <jdurgin@redhat.com>

Merge pull request #4961 from ceph/wip-11493-hammer

backport 11493 fixes, and test, prevetning ec cache pools

Reviewed-by: Samuel Just <sjust@redhat.com>

OSDMonitor: disallow ec pools as tiers

Fixes: 11650
Signed-off-by: Samuel Just <sjust@redhat.com>
(cherry picked from commit 11b7801bb57cb25cd2d26d58722d49691747725b)

mon: prevent pool with snapshot state from being used as a tier

If we add a pool with snap state as a tier the snap state gets clobbered
by OSDMap::Incremental::propogate_snaps_to_tiers(), and may prevent OSDs
from starting.  Disallow this.

Include a test.

Fixes: #11493
Backport: hammer, giant, firefly
Signed-off-by: Sage Weil <sage@redhat.com>
(cherry picked from commit bbec53edf9e585af4e20bbc9ba9057d6fdfda342)

test/librados/tier.cc: destroy and recreate cache pool on every test

Namespaces are not sufficient with the checks for 11493 in the mon.

Signed-off-by: Samuel Just <sjust@redhat.com>
(cherry picked from commit bef09e0cdb274cb1c87335a2af9ee532d14a4596)

Merge pull request #4846 from SUSE/wip-11862-hammer

missing man pages for ceph-create-keys, ceph-disk-*

Reviewed-by: Kefu Chai <kchai@redhat.com>
Reviewed-by: Ken Dreyer <kdreyer@redhat.com>

Merge pull request #4934 from dachary/wip-releases-hammer

doc/release-notes: v0.94.2

doc/release-notes: v0.94.2

Signed-off-by: Sage Weil <sage@redhat.com>
(cherry picked from commit 306345b29c259ab04a58ed5d40f801645485b29d)

Conflicts:
doc/release-notes.rst

tests: verify librbd blocking aio code path

Signed-off-by: Jason Dillaman <dillaman@redhat.com>
(cherry picked from commit 4cf41486e9c9e1efcb863960a8f3e0326ffca7e5)

Conflicts:
src/test/librbd/test_librbd.cc: trival resolution

librbd: new rbd_non_blocking_aio config option

Setting this option to false reverts librbd to legacy behavior
where AIO operations could potentially block.

Signed-off-by: Jason Dillaman <dillaman@redhat.com>
(cherry picked from commit 769cad12716b85d87eacc1069dd9f5c21cad3915)

PendingReleaseNotes: document changes to librbd's aio_read methods

Signed-off-by: Jason Dillaman <dillaman@redhat.com>

librbd: AioRequest::send no longer returns a result

The librados calls used by AioRequest::send should always return
zero unless there is a bug.

Signed-off-by: Jason Dillaman <dillaman@redhat.com>
(cherry picked from commit c77bce3311ab62892eb8c1d883263ba7ed663b20)

Conflicts:
src/librbd/AioRequest.cc: trivial resolution
src/librbd/AsyncFlattenRequest.cc: trivial resolution

tests: update librbd AIO tests to remove result code

Signed-off-by: Jason Dillaman <dillaman@redhat.com>
(cherry picked from commit 948b15eb52fd5d9ce842fa12ee0cecda17353b01)

Conflicts:
src/test/librbd/test_internal.cc: trivial resolution
src/test/librbd/test_librbd.cc: trivial resolution

librbd: internal AIO methods no longer return result

All failures should be returned via the AioCompletion.

Signed-off-by: Jason Dillaman <dillaman@redhat.com>
(cherry picked from commit 9ab42d613128ab08c688ddbea93df4c95068b9cd)

Conflicts:
src/librbd/AioRequest.cc: trivial resolution
src/librbd/internal.cc: trivial resolution

Throttle: added pending_error method to SimpleThrottle

Allow the client of SimpleThrottle to detect an async error
so that it can exit early.

Signed-off-by: Jason Dillaman <dillaman@redhat.com>
(cherry picked from commit b88b88c5df91325fb713c2031a56bffe421268e0)

librbd: add new fail method to AioCompletion

Helper method to handle passing fatal errors generated within
librbd (not from the OSDs) back to the client.

Signed-off-by: Jason Dillaman <dillaman@redhat.com>
(cherry picked from commit 6d1d0c867855a96bee4c13a0c0a39a0e002ccd12)

librbd: avoid blocking AIO API methods

Enqueue all AIO API methods within the new librbd thread pool to
reduce the possibility of any blocking operations. To maintain
backwards compatibility with the legacy return codes of the API's
AIO methods, it's still possible to block attempting to acquire
the snap_lock.

Fixes: #11056
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
(cherry picked from commit 3a7b5e30efdb21aa1a0aeb68a5d02a1ac2a5faf3)

librbd: add task pool / work queue for requests

Signed-off-by: Jason Dillaman <dillaman@redhat.com>
(cherry picked from commit afb896d91f886b647baf38f7ec94cc3739f6d2a9)

Conflicts:
src/librbd/ImageCtx.cc: trivial resolution
src/librbd/ImageCtx.h: trivial resolution

0.94.2

ReplicatedPG::release_op_ctx_locks: requeue in scrub queue if blocked

Otherwise we can reorder an op around another op which got blocked by a
scrub which started after the first blocked on an obc.

Fixes: #11691
Signed-off-by: Samuel Just <sjust@redhat.com>
(cherry picked from commit be873eb8da7b29ecefaa5a99b88de7ddcca711ee)

ReplicatedPG::finish_ctx: take excl lock if operation is rw

Fixes: #11677
Signed-off-by: Samuel Just <sjust@redhat.com>
(cherry picked from commit 5c2b795724423ed484ab451de855ddcfc085342b)

RadosModel: randomly prefix delete with assert_exists

Signed-off-by: Samuel Just <sjust@redhat.com>
(cherry picked from commit 4fe7d2abdff2fce359e5e992206644cc03825ee0)

RadosModel: assert exists on subsequent writes

Signed-off-by: Samuel Just <sjust@redhat.com>
(cherry picked from commit 121aa3bc612b86281535ac3bcfe98bc99bc99ace)

test/librados/snapshots.cc: add test for 11677

Signed-off-by: Samuel Just <sjust@redhat.com>
(cherry picked from commit c2d17b927f8a222164b3bf2922a4ff337696f566)

ceph-disk: support NVMe device partitions

Linux nvme kernel module v0.9 enumerate devices as following:

/dev/nvme0 - characted revice
/dev/nvme0n1 - whole block device
/dev/nvme0n1p1 - first partition
/dev/nvme0n1p2 - second partition

http://tracker.ceph.com/issues/11612 Fixes: #11612

Signed-off-by: Ilja Slepnev <islepnev@gmail.com>
(cherry picked from commit 9b62cf254d02d30609793be8b1cb8a94f38891f1)

mds: clear CDir::STATE_REJOINUNDEF after fetching dirfrag

Fixes: #11541
Signed-off-by: Yan, Zheng <zyan@redhat.com>
(cherry picked from commit ab1e5394dc778f6799472bd79a4d9ba7197107c2)

rgw: Use attrs from source bucket on copy

On copy objects, when bucket source is the same as the destination, use attrs
from source bucket.

Fixes: #11639
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
(cherry picked from commit 1dac80df1d4a2364154ed8b404d13609936c257b)

rgw: always check if token is expired

Fixes: #11367
Currently token expiration is only checked by the token cache. With PKI
tokens no expiration check is done after decoding the token. This causes
PKI tokens to be valid indefinitely. UUID tokens are validated by
keystone after cache miss so they are not affected by this bug.

This commit adds explicit token expiration check to
RGWSwift::validate_keystone_token()

Signed-off-by: Anton Aksola <anton.aksola@nebula.fi>
Reported-by: Riku Lehto <riku.lehto@nexetic.com>
(cherry picked from commit 2df069390ea3bbcfbab5022750e89f51d197cc11)

admin/build-doc: fix dependency checks

http://tracker.ceph.com/issues/11857 Fixes: #11857

Signed-off-by: John Spray <john.spray@redhat.com>
(cherry picked from commit 539c1ba7211f579bad4f59ae824f1e68e620ecbd)

Conflicts:
admin/build-doc
            Insert lines at appropriate spot

man/ceph-create-keys.8: add missing file

This is the generated manpage, taken from a local build of master

Signed-off-by: Nathan Cutler <ncutler@suse.com>
(cherry picked from commit bcda61fcbe07ee36cd5172d80018f287591660ec)

doc: add ceph-create-keys.8

Fixes: #10725
Signed-off-by: Kefu Chai <kchai@redhat.com>
(cherry picked from commit 27cee2f1f46a9f47cda9dfeb56ff1259e982960c)

Conflicts:
    doc/man/8/ceph-create-keys.rst
    Includes fixes from https://github.com/ceph/ceph/pull/4855

WorkQueue: added virtual destructor

Signed-off-by: Jason Dillaman <dillaman@redhat.com>
(cherry picked from commit b3f5a75332c058816dc39b71e9d2b36e752159f4)

WorkQueue: add new ContextWQ work queue

The queue holds a collection of Context pointers that will
be completed by the thread pool.

Signed-off-by: Jason Dillaman <dillaman@redhat.com>
(cherry picked from commit 24a33e977f7b71962adeeb48f75d488a76e70fa9)

rgw: Do not enclose the Bucket header in quotes

Fixes: #11860
Signed-off-by: Wido den Hollander <wido@42on.com>
(cherry picked from commit 8af25faed93fe02d3dad585b8579ce8b041cc4e6)

Merge pull request #4795 from dachary/wip-11806-hammer

ceph / ceph-dbg steal ceph-objecstore-tool from ceph-test / ceph-test-dbg

Reviewed-by: Sage Weil <sage@redhat.com>

debian: ceph-dbg steals ceph-objectstore-tool from ceph-test-dbg

When ceph-objectstore-tool was moved from ceph-test to
ceph by 61cf5da0b51e2d9578c7b4bca85184317e30f4ca, the ceph package in
debian/control was updated accordingly, as recommended by
https://www.debian.org/doc/debian-policy/ch-relationships.html#s-replaces

The same must be done for the ceph-dbg package because
/usr/lib/debug/usr/bin/ceph-objectstore-too is no longer in
ceph-test-dbg.

Although the change was merged may 6th, 2015
8f23382064c189b657564d58c3f9d17720e891ed, teuthology jobs were not
always failing because packages were not systematically upgraded during
the installation. The missing dependencies that were responsible for
this upgrade problem were fixed by
f898ec1e4e3472b0202280f09653a769fc62c8d3 on may 18th, 2015 and all
upgrade tests relying on ceph-*-dbg packages started to fail
systematically after this date.

http://tracker.ceph.com/issues/11546 Fixes: #11546

Signed-off-by: Loic Dachary <ldachary@redhat.com>
(cherry picked from commit 6f11fbf41fab10924b1e0e41fcf27864779d4073)

Merge pull request #4773 from dachary/wip-11733-hammer

Debian: ceph-test and rest-bench debug packages should require their respective binary packages

Reviewed-by: Ken Dreyer <kdreyer@redhat.com>

debian: set rest-bench-dbg ceph-test-dbg dependencies

Debian's debug packages ought to depend on their respective binary
packages. This was the case for many of our ceph packages, but it was
not the case for ceph-test-dbg or rest-bench-dbg.

Add the dependencies on the relevant binary packages, pinned to
"= ${binary:Version}" per convention.

http://tracker.ceph.com/issues/11673 Fixes: #11673

Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
(cherry picked from commit f898ec1e4e3472b0202280f09653a769fc62c8d3)

Merge pull request #4696 from ceph/wip-11622-hammer

Wip 11622 hammer

Reviewed-by: Loic Dachary <ldachary@redhat.com>

Merge pull request #4649 from ceph/wip-hammer-package-perf-objectstore

packaging: include ceph_perf_objectstore

rgw: merge manifests correctly when there's prefix override

Fixes: #11622
Backport: hammer, firefly

Prefix override happens in a manifest when a rados object does not
conform to the generic prefix set on the manifest. When merging
manifests (specifically being used in multipart objects upload), we need
to check if the rule that we try to merge has a prefix that is the same
as the previous rule. Beforehand we checked if both had the same
override_prefix setting, but that might not apply as both manifests
might have different prefixes.

Signed-off-by: Yehuda Sadeh <yehuda@redhat.com>
(cherry picked from commit 389ae6739ddc6239a4dd7c5f7f9bfc9b645b8577)

rgw: restore buffer of multipart upload after EEXIST

Fixes #11604
Backport: hammer, firefly

When we need to restart a write of part data, we need to revert to
buffer to before the write, otherwise we're going to skip some data.

Signed-off-by: Yehuda Sadeh <yehuda@redhat.com>
(cherry picked from commit 580ccaec12daae64c38a1616d0be907bdd70a888)

ceph.spec: update OpenSUSE BuildRequires

OpenSUSE 13.2 needs libsnappy-devel but not bzip2-devel.

Signed-off-by: Loic Dachary <ldachary@redhat.com>
(cherry picked from commit bdac3dc3fb189688af52f60b0b34339dd8fea251)

packaging: include ceph_perf_objectstore

The /usr/bin/ceph_perf_objectstore file is installed by default. Prior
to this commit it was missing from the packaging. This caused the RPM to
fail to build in mock.

Add ceph_perf_objectstore to the "ceph-test" RPM and Debian package.

If we end up developing further ceph_perf_* utilities, it would make
sense to glob them all with a wildcard, similar to what we are doing
with all the ceph_test_* utilities in ceph-test.

Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
(cherry picked from commit 338b44bc74bc4597939c5c58f2a6f2cb08de7d9c)

Merge pull request #4568 from dachary/wip-10662-10663-hammer

RGW swift API: Response header of COPY request for object does not

contain x-copied-from, custom metadata, x-copied-from-last-modified, X-Copied-From-Account headers

Reviewed-by: Yehuda Sadeh <yehuda@redhat.com>

Merge pull request #4629 from ceph/hammer-uclient-checking

Hammer uclient checking

Reviewed-by: Loic Dachary <ldachary@redhat.com>

client: fix error handling in check_pool_perm

Previously, on an error such as a pool not existing,
the caller doing the check would error out, but
anyone waiting on waiting_for_pool_perm would
block indefinitely (symptom was that reads on a
file with a bogus layout would block forever).

Fix by triggering the wait list on errors and
clear the CHECKING state so that the other callers
also perform the check and find the error.

Additionally, don't return the RADOS error code
up to filesystem users, because it can be
misleading.  For example, nonexistent pool is
ENOENT, but we shouldn't give ENOENT on IO
to a file which does exist, we should give EIO.

Signed-off-by: John Spray <john.spray@redhat.com>
(cherry picked from commit e08cf25cafef5752877439c18cc584b0a75eca08)
Reviewed-by: Greg Farnum <gfarnum@redhat.com>

client: use SaferCond in check_pool_perm

Just because it's easier to read.

Signed-off-by: John Spray <john.spray@redhat.com>
(cherry picked from commit 289ee3b80ccce6bab2966f513a37332280d04a06)
Reviewed-by: Greg Farnum <gfarnum@redhat.com>

client: check OSD caps before read/write

Signed-off-by: Yan, Zheng <zyan@redhat.com>
(cherry picked from commit 3c4028ec21e3ef9e8801c4570420c88722651cc7)
Reviewed-by: Greg Farnum <gfarnum@redhat.com>

Merge pull request #4567 from dachary/wip-10938-hammer

RGW Swift API: response for GET/HEAD on container does not contain the X-Timestamp header

Reviewed-by: Yehuda Sadeh <yehuda@redhat.com>

Merge pull request #4570 from dachary/wip-10243-hammer

civetweb is hitting a limit (number of threads 1024)

Merge pull request #4573 from dachary/wip-11125-hammer

rgw: keystone token cache does not work correctly

Merge pull request #4574 from dachary/wip-11160-hammer

rgw: shouldn't need to disable rgw_socket_path if frontend is configured

Merge pull request #4575 from dachary/wip-10650-hammer

Response header of swift API PUT /container/object returned by RGW

does not contain last-modified, content-length, x-trans-id headers. But Swift returns these headers.

Reviewed-by: Yehuda Sadeh <yehuda@redhat.com>

Merge pull request #4576 from dachary/wip-10661-hammer

RGW swift API: Response header of POST request for object does not contain content-length and x-trans-id headers

Reviewed-by: Yehuda Sadeh <yehuda@redhat.com>

Merge pull request #4579 from dachary/wip-11036-hammer

RGW Swift API: response for PUT on /container does not contain the mandatory Content-Length header when FCGI is used

Reviewed-by: Yehuda Sadeh <yehuda@redhat.com>

Merge pull request #4580 from dachary/wip-11088-hammer

RGW Swift API: wrong handling of empty metadata on Swift container

Reviewed-by: Yehuda Sadeh <yehuda@redhat.com>

Merge pull request #4581 from dachary/wip-11323-hammer

rgw: quota not respected in POST object

Reviewed-by: Yehuda Sadeh <yehuda@redhat.com>

Merge pull request #4566 from dachary/wip-11478-hammer

Queued AIO reference counters not properly updated

Reviewed-by: Josh Durgin <jdurgin@redhat.com>

Merge pull request #4564 from dachary/wip-11369-hammer

Periodic failure of TestLibRBD.DiffIterateStress

Reviewed-by: Josh Durgin <jdurgin@redhat.com>

Merge pull request #4585 from ceph/wip-11370-hammer

A retransmit of proxied flatten request can result in -EINVAL

Reviewed-by: Loic Dachary <ldachary@redhat.com>

Merge pull request #4618 from dachary/wip-11398-kill-daemons-hammer

tests: ceph-helpers kill_daemons fails when kill fails

Reviewed-by: Kefu Chai <kchai@redhat.com>

tests: ceph-helpers kill_daemons fails when kill fails

Instead of silently leaving the daemons running, it returns failure so
the caller can decide what to do with this situation. The timeout is
also extended to minutes instead of seconds to gracefully handle the
rare situations when a machine is extra slow for some reason.

http://tracker.ceph.com/issues/11398 Fixes: #11398

Signed-off-by: Loic Dachary <ldachary@redhat.com>
(cherry picked from commit 0e26e9f72bc14417266b87ac1159607e1b109303)

Added a "ceph hello world" for a simple check for ceph-deploy qa suite

Signed-off-by: Yuri Weinstein <yweinste@redhat.com>
(cherry picked from commit 13abae186357f4e9bb40990a7a212f93ec2e1e79)

Signed-off-by: Yuri Weinstein <yweinste@redhat.com>

Merge pull request #4502 from dachary/wip-11026-hammer

objecter: can get stuck in redirect loop if osdmap epoch == last_force_op_resend

Reviewed-by: Sage Weil <sage@redhat.com>

Merge pull request #4562 from dachary/wip-11376-hammer

ceph-objectstore-tool should be in the ceph server package

Reviewed-by: Ken Dreyer <kdreyer@redhat.com>

packaging: mv ceph-objectstore-tool to main ceph pkg

This change ensures that the ceph-objectstore-tool utility is present on
all OSDs.  This makes it easier for users to run this tool to do manual
debugging/recovery in some scenarios.

http://tracker.ceph.com/issues/11376 Refs: #11376

Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
(cherry picked from commit 61cf5da0b51e2d9578c7b4bca85184317e30f4ca)
    Conflicts:
            debian/control
            because file layout changes from ceph-test and ceph << 0.94.1-46

Merge pull request #4561 from dachary/wip-11143-hammer

src/ceph-disk : disk zap sgdisk invocation

Reviewed-by: Loic Dachary <ldachary@redhat.com>

Merge pull request #4560 from dachary/wip-11507-hammer

object creation by write cannot use an offset on an erasure coded pool

Reviewed-by: Samuel Just <sjust@redhat.com>