Ramana Raja [Thu, 25 May 2023 16:48:12 +0000 (16:48 +0000)]
qa: Add tests to validate syncing of images using rbd-mirror
Introduce functional tests to validate that the images under
workloads are correctly mirrored between two clusters using snapshot
based mirroring.
Run workload on a primary image using a krbd or nbd client. Take
mirror snapshots of the image under workload. Unmount the mapped image
and calculate its MD5 checksum before demoting it. After demotion,
wait for the mirror status of the image to be 'up+unknown' in both
the clusters. This is to make sure that the non-primary image in the
other cluster is ready to be promoted. Now promote the non-primary
image in the other cluster. Map the promoted image and calculate its
MD5 checksum. Verify that the checksums of the demoted and promoted
images in the two clusters are the same.
The above test is run as part of two different workunits:
- a workunit that validates the syncing of multiple mirrored images
with workloads running on them
- another workunit that validates the syncing of a single mirrored
image with workload running on it and the image is set as primary
alternatively between the two clusters, as it happens during
failover and failback scenarios.
Fixes: https://tracker.ceph.com/issues/61617 Signed-off-by: Ramana Raja <rraja@redhat.com> Co-authored-by: Ilya Dryomov <idryomov@redhat.com> Co-authored-by: Christopher Hoffman <choffman@redhat.com>
(cherry picked from commit b7aae5c3c5a1dd24c4cb7ceb499292af00bae680)
Ramana Raja [Fri, 9 Feb 2024 00:32:37 +0000 (19:32 -0500)]
qa/workunits: make wait_for_status_in_pool_dir() reentrant
In rbd_mirror_helpers.sh, the `wait_for_status_in_pool_dir()` helper
stored `mirror image status` and `mirror pool status` command outputs
in files that could be shared over successive calls or calls from
multiple threads. Instead store the command outputs in local variables
to make `wait_for_status_in_pool_dir()` reentrant.
Zac Dover [Fri, 23 Feb 2024 16:05:42 +0000 (02:05 +1000)]
doc/rbd: repair ordered list
Fix the numbering in an ordered list. The numbering was thrown off
because a ".. prompt" directive was improperly indented (it wasn't
indented at all).
See https://github.com/ceph/ceph/pull/55540#discussion_r1500051264
Redouane Kachach [Thu, 22 Feb 2024 09:19:06 +0000 (10:19 +0100)]
mgr/rook: adding empty calls to upgrade_ls and upgrade_status
added empty calls to upgrade_ls and upgrade_status to avoid
dashboard errors when entering the view Cluster > Upgrade. Empty
calls are used because we don't support the upgrade functionality
in rook as we do for normal Ceph deployments. In case of rook user
has to follow a different process to upgrade Ceph.
Redouane Kachach [Thu, 22 Feb 2024 09:18:28 +0000 (10:18 +0100)]
mgr/rook: removing all the code related to OSDs creation/removal Fixes: https://tracker.ceph.com/issues/64211 Signed-off-by: Redouane Kachach <rkachach@redhat.com>
When doing PG dump using 'ceph pg dump --format json-pretty'
the output is extremely big that the command hangs and also
the ceph-mgr hangs and eventuall fails over.
The exact size depends on the number of OSDs in the cluster
and the number of peers for each OSD.
In tests, it's been identified that the network ping times
is the largest component in terms of size which is removed
from the output now so as to limit the overall size.
Ronen Friedman [Mon, 12 Feb 2024 14:50:22 +0000 (08:50 -0600)]
test/osd: fix test_scrub_sched following scrubber changes
Replacing PgScrubber::determine_scrub_time() with a local copy,
as a stop-gap measure to keep the test running.
The scrub scheduling refactoring will remove the need for
this function, and the test will be updated accordingly.
Adam King [Thu, 15 Feb 2024 14:42:50 +0000 (09:42 -0500)]
Merge pull request #55566 from zdover23/wip-doc-2024-02-14-cephadm-services-nfs
doc/cephadm: correct nfs config pool name
Reviewed-by: Adam King <adking@redhat.com> Reviewed-by: Anthony D'Atri <anthonyeleven@users.noreply.github.com> Reviewed-by: John Mulligan <jmulligan@redhat.com>
Casey Bodley [Wed, 14 Feb 2024 14:43:14 +0000 (09:43 -0500)]
rgw/putobj: RadosWriter uses part head object for multipart parts
the cleanup logic in the RadosWrite destructor was using the wrong
`head_obj` to avoid races between cleanup and part re-uploads. it
pointed at the final location of the multipart upload, rather than the
head object of the current part
Ilya Dryomov [Mon, 12 Feb 2024 12:07:22 +0000 (13:07 +0100)]
librbd: refactor merge() for SparseBufferlistExtent
- pass left.length + right.length instead of bl.length()
for consistency and to avoid circumventing the assert in
SparseBufferlistExtent constructor
- claim_append() takes an lvalue reference, no need to move
- follow the pattern used in split()
Ilya Dryomov [Mon, 12 Feb 2024 10:00:45 +0000 (11:00 +0100)]
librbd: fix split() for SparseExtent and SparseBufferlistExtent
SparseExtents and SparseBufferlist are typedefs for interval_map. In
both cases, split() handler is broken: for the former the extent isn't
actually split and for the latter incorrect bufferlist is attached to
the split extent.
Fortunately, both SnapshotDelta as produced by ObjectListSnapsRequest
and SparseBufferlist used in a couple of places seem to be collections
where only disjoint intervals are inserted and splitting doesn't occur
(at least in the common case). But still, this is a landmine waiting
for someone to step on it.
Venky Shankar [Wed, 14 Feb 2024 05:10:49 +0000 (10:40 +0530)]
Merge PR #54690 into main
* refs/pull/54690/head:
client: handle callback completion if the async I/O failed
client: make sure the callback is finished when returning ENOTCONN
client: do not accept zero byte write request
client: check for negative value of iovcnt
src/test: test zero bytes async i/o
src/test: test async I/O with negative iov structures count
src/test: test async I/O if the client is not mounted
src/test: test async I/O with read only file
src/test: test async I/O with a file created with O_PATH
Reviewed-by: Frank S. Filz <ffilzlnx@mindspring.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Rishabh Dave <ridave@redhat.com> Reviewed-by: Matt Benjamin <mbenjami@redhat.com>
osd: always send returnvec-on-errors for client's retry
Currently there is a discrepancy in terms of the returnvec's
presence between MOSDOpReplys sent for original requests and
those on dups. The former always contain the returnvec if
an error happened, even if `allows_returnvec()` is `false`.
This commit extends the behavior on dups.
For RCA please see: https://tracker.ceph.com/issues/64192#note-9
Matt Benjamin [Fri, 2 Feb 2024 19:59:20 +0000 (14:59 -0500)]
rgw_sigv4: fixes to bootstrap maven/junit5 suite
The junit5 suite in fact chooses selects transport security (SSL)
strictly from the endpoint URL. The test_awssdkv4_sig.sh (or its
caller?) only needs to export RGW_HTTP_ENDPOINT_URL appropriately
to get one or the other.
Fix several mistakes in refactoring caught by Ali Maredia.
Print AccessKey, SecretKey and EndpointURL on startup
Signed-off-by: Matt Benjamin <mbenjamin@redhat.com>
These changes address checksum header identification and signing
algorithm selection, including checksum trailer verification
for signed- and unsigned-payload cases.
These changes address all the actual S3 request failures I have
so far been able to reproduce, with and without content checksums
and/or new trailing checksum headers, and with and without
SSL.
Fixes: https://tracker.ceph.com/issues/63153
Specifically, it fixes the request failures that motivated the
initial tracker filing. It extracts but does not validate new client
content checksums if present. Validation and management of new
S3 content-checksum headers will follow in a subsequent change.
Signed-off-by: Matt Benjamin <mbenjamin@redhat.com>
squashed commits:
* wip chunk meta parsing--seem to have first AWSv4ComplMulti::ChunkMeta::create_next sort of parsing
* use constexpr sarlen(...) for static array lengths throughout rgw_auth_s3.cc
* link AWSv4CompleMulti::ChunkMeta to its enclosing completer
* capture original content-length header before AWSv4ComplMulti overwrites it
* mostly extract the trailer
* fix misordered content-length, experiment w/exbuf
* save leftover bytes between calls to AWSv4ComplMulti::recv_chunk()
* propagate data_offset_in_stream from AWSv4ComplMulti::recv_chunk()
* clean up trailer section extract
* trailer section cleanup and introduce extract_helper
* unrolled checksum extract--fixup
* fix sv_trailer end pos, and cleanup
* add proplist interface to rgw::auth::Completer and AWSv4ComplMulti
* spliterate trailers
* check completer props
* redefine prop_map to point into already-allocated trailer_vec
* hax: thread a counter onto AWSv4ComplMulti recv_body() and recv_chunk path
* fix apparent bug where due to reads less than chunk_size induce a final, zero-length read that was skipped before forcing recognition of the last chunk in the stream
* check only for a trailing checksum named in x-amz-trailer
* don't try to match signatures when no signature provided (because streaming unsigned)
* oops, fix content_length decl
* fix recognition of next chunk envelope in unsigned aws-chunk case
* clean up AWSv4CompMulti flags and correctly detect aws unsigned chunked
* rework checksum-trailer extraction and introduce AWSv4ComplMulti::calc_v4_trailing_signature
* thread const struct req_state* into AWSv4ComplMulti
* large cleanup of trailer parsing, no regression
* fix trailer signature calculation--checks
* correctly generate final chunk hmac
* typo in comment
* verify trailing signature when expected (using expected final chunk signature)
* move trailer_vec back onto recv_body()'s stack
* remove strange completer comment
* remove last_frag (now points into parsing_buf)
* remove implied dependency on content_length
* move trailer recognition to AWSv4ComplMulti::complete()
* remove now-unused is_last_chunk() predicate
* remove unused ChunkMeta::completer
* responses to review comments
* when trailer is sig expected, fail (only) if none present or if it does not match calculated
* remove stale parse_content_length(...) decl
* remove now-unused AWSv4ComplMulti::content_length
* fix extract_helper end search position as in mut_extract_helper
* change "\n" reserve term in get_canon_amz_hdrs() part of the sum (review)
and initialize length to 0
* remove debugging code
Signed-off-by: Matt Benjamin <mbenjamin@redhat.com>
Vallari Agrawal [Thu, 1 Feb 2024 13:07:27 +0000 (18:37 +0530)]
qa: add qa/tasks/nvmeof.py and rbd/nvmeof_basic_task and fio workunits
This is v2 of the rbd/nvmeof test: It deploys 1 gateway and 1 initiator.
Then does basic verification on nvme commands and runs fio.
This commit creates:
1. qa/tasks/nvmeof.py: adds a new 'Nvmeof' task which deploys
the gateway and shares config with the initiator hosts.
Sharing config was previously done by 'nvmeof_gateway_cfg' task
in qa/tasks/cephadm.py (that task is removed in this commit).
2. qa/workunits/rbd/nvmeof_basic_tests.sh:
Runs nvme commands (discovery, connect, connect-all, disconnect-all,
and list-subsys) and does basic verification of the output.
3. qa/workunits/rbd/nvmeof_fio_test.sh:
Runs fio command. Also runs iostat in parallel if IOSTAT_INTERVAL
variable is set. This variable configures the delay between each iostat
print.
nvmeof-cli upgrade from v0.0.6 to v0.0.7 introduced major changes
to all nvmeof commands. This commit changes v0.0.6 commands to
v0.0.7 in qa/workunits/rbd/nvmeof_initiator.sh
projects / ceph.git / log