]>
git.apps.os.sepia.ceph.com Git - ceph.git/log
Owen Synge [Mon, 1 Jun 2015 12:58:31 +0000 (14:58 +0200)]
ceph.spec.in libcephfs_jni1 has no %post and %postun
/usr/lib64/libcephfs_jni.so.1.0.0 requires /sbin/ldconfig to be
run after installing and after removing.
Signed-off-by: Owen Synge <osynge@suse.com>
Kefu Chai [Mon, 1 Jun 2015 07:33:15 +0000 (15:33 +0800)]
Merge pull request #4820 from ceph/wip-fix-ceph-perf-local
tools: fix ceph perf local build on i386
Reviewed-by: Haomai Wang <haomaiwang@gmail.com>
Kefu Chai [Mon, 1 Jun 2015 03:16:01 +0000 (11:16 +0800)]
test/perf_local: disable tests if not supported
* pass appropriate "-m<machine>" args to compiler
Signed-off-by: Kefu Chai <kchai@redhat.com>
Kefu Chai [Mon, 1 Jun 2015 02:36:01 +0000 (10:36 +0800)]
.gitignore: ignore /perf_perf_local
Fixes: #11827
Signed-off-by: Kefu Chai <kchai@redhat.com>
Sage Weil [Sun, 31 May 2015 16:43:33 +0000 (12:43 -0400)]
Merge remote-tracking branch 'gh/next'
Sage Weil [Sun, 31 May 2015 16:42:52 +0000 (12:42 -0400)]
unittest_ceph_argparse: test float parsing
Signed-off-by: Sage Weil <sage@redhat.com>
Rajesh Nambiar [Sun, 31 May 2015 14:36:08 +0000 (14:36 +0000)]
Allow float value by allowing . in input value
Dont bail out if the input value happens to be .
Fixes: #11620
Signed-off-by: Rajesh Nambiar <rajesh.n@msystechnologies.com>
Tested-by: Sage Weil <sage@redhat.com>
Yehuda Sadeh [Sat, 30 May 2015 17:25:45 +0000 (20:25 +0300)]
Merge pull request #4810 from zaitcev/context_io_init_undup
rgw: Drop a redundant context_io.init
Reviewed-by: Yehuda Sadeh <yehuda@redhat.com>
Pete Zaitcev [Fri, 29 May 2015 23:55:59 +0000 (17:55 -0600)]
rgw: Drop a redundant context_io.init
Interestingly enough, the function is not even entirely idempotent:
it prints debugging output, duplicated.
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Loic Dachary [Sat, 30 May 2015 14:17:46 +0000 (16:17 +0200)]
Merge pull request #4812 from yuyuyu101/fix-perf-incompatible
PerfLocal: Doesnt' compile div64 for non-64 bits arch
Reviewed-by: Loic Dachary <ldachary@redhat.com>
Haomai Wang [Sat, 30 May 2015 13:10:12 +0000 (21:10 +0800)]
PerfLocal: Doesnt' compile div64 for non-64 bits arch
Signed-off-by: Haomai Wang <haomaiwang@gmail.com>
Loic Dachary [Sat, 30 May 2015 10:19:59 +0000 (12:19 +0200)]
Merge pull request #4797 from dachary/wip-11665-erasure-code-lrc
tests: add lrc tests to osd-scrub-repair.sh
Reviewed-by: Shylesh Kumar <shmohan@redhat.com>
Kefu Chai [Sat, 30 May 2015 09:47:36 +0000 (17:47 +0800)]
Merge pull request #4799 from dachary/wip-install-deps
install-deps.sh: robust pip and wheel installation
Reviewed-by: Kefu Chai <kchai@redhat.com>
Loic Dachary [Sat, 30 May 2015 08:53:51 +0000 (10:53 +0200)]
install-deps.sh: do not store pip cache outside of the tree
Signed-off-by: Loic Dachary <ldachary@redhat.org>
Sage Weil [Sat, 30 May 2015 00:43:54 +0000 (17:43 -0700)]
Merge pull request #4727 from tchaikov/wip-osdmaptool-dump-tree-with-format
osdmaptool: dump tree with given format
Reviewed-by: Sage Weil <sage@redhat.com>
Loic Dachary [Fri, 29 May 2015 21:55:01 +0000 (23:55 +0200)]
install-deps.sh: keep debian alternatives
Instead of removing the | when an alternative is found in the control
file such as
cryptsetup-bin | cryptsetup
remove the surrounding spaces so that it is treated as a regular
expression that matches either one.
Replace the form
sudo bash -c "FOO=bar ..."
with
sudo env FOO=bar ...
to reduce the levels of shell escaping.
Reported-by: http://dyweni.com/
Signed-off-by: Loic Dachary <ldachary@redhat.com>
Loic Dachary [Thu, 28 May 2015 23:34:45 +0000 (01:34 +0200)]
install-deps.sh: robust pip and wheel installation
The wheel and pip module must not only be installed in each wheelhouse
directory for tox to find. They must also be installed in the virtual
environment that populates the wheelhouse directory. Otherwise older pip
modules such as the one found by default on Ubuntu 12.04 will fail.
Python 2.7.3 on Ubuntu 12.04 also requires that distribute >= 0.7.3 is
installed although it is redundant with setuptools, otherwise it will
fail to run the wheel module.
Signed-off-by: Loic Dachary <ldachary@redhat.com>
Sage Weil [Fri, 29 May 2015 21:21:52 +0000 (14:21 -0700)]
Merge pull request #4805 from athanatos/wip-11787
Wip 11787
Reviewed-by: Sage Weil <sage@redhat.com>
Samuel Just [Fri, 29 May 2015 21:20:29 +0000 (14:20 -0700)]
Merge remote-tracking branch 'upstream/wip-txn-noappend-sam-rebased'
Reviewed-by: Sage Weil <sage@redhat.com>
Reviewed-by: Samuel Just <sjust@redhat.com>
Sage Weil [Fri, 29 May 2015 21:19:44 +0000 (14:19 -0700)]
Merge pull request #4526 from athanatos/wip-11296
Wip 11296
Reviewed-by: Sage Weil <sage@redhat.com>
Samuel Just [Fri, 29 May 2015 21:17:42 +0000 (14:17 -0700)]
Merge remote-tracking branch 'upstream/wip-11493'
Reviewed-by: Samuel Just <sjust@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Sage Weil [Fri, 29 May 2015 21:11:12 +0000 (14:11 -0700)]
Merge pull request #4803 from athanatos/wip-11677
Wip 11677 -- fixes for rw rados ops with snaps
Reviewed-by: Sage Weil <sage@redhat.com>
Samuel Just [Wed, 20 May 2015 23:10:02 +0000 (16:10 -0700)]
ReplicatedPG::release_op_ctx_locks: requeue in scrub queue if blocked
Otherwise we can reorder an op around another op which got blocked by a
scrub which started after the first blocked on an obc.
Fixes: #11691
Signed-off-by: Samuel Just <sjust@redhat.com>
Samuel Just [Tue, 19 May 2015 17:56:11 +0000 (10:56 -0700)]
ReplicatedPG::finish_ctx: take excl lock if operation is rw
Fixes: #11677
Signed-off-by: Samuel Just <sjust@redhat.com>
Sage Weil [Fri, 29 May 2015 21:03:36 +0000 (14:03 -0700)]
Merge pull request #4804 from athanatos/wip-11771
osd_types::is_new_interval: size change triggers new interval
Reviewed-by: Sage Weil <sage@redhat.com>
Samuel Just [Fri, 29 May 2015 17:57:29 +0000 (10:57 -0700)]
Merge pull request #4070 from ceph/wip-chain-xattr
os/chain_xattr: cope with xfs limit of 254 bytes for inlined xattrs.
Reviewed-by: Haomai Wang <haomaiwang@gmail.com>
Reviewed-by: Ning Yao <zay11022@gmail.com>
Samuel Just [Fri, 29 May 2015 17:41:12 +0000 (10:41 -0700)]
Merge pull request #4059 from majianpeng/copyget-digest
Replicated: For COPY_GET, only src has data/omap digest, the dst can do.
Reviewed-by: Sage Weil <sage@redhat.com>
Reviewed-by: Samuel Just <sjust@redhat.com>
Samuel Just [Fri, 29 May 2015 17:31:21 +0000 (10:31 -0700)]
Merge pull request #3253 from majianpeng/bug-fix
cleanup code for wbthrottle.
Reviewed-by: Samuel Just <sjust@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
John Spray [Fri, 29 May 2015 10:39:12 +0000 (12:39 +0200)]
Merge pull request #4800 from hjwsm1989/journaler
osdc/Journaler.h: fix ceph_file_layout dump error in journaler::dum…
Reviewed-by: John Spray <john.spray@redhat.com>
Loic Dachary [Fri, 29 May 2015 08:56:54 +0000 (10:56 +0200)]
Merge pull request #4794 from XinzeChi/wip-kill-sleep
test: check daemon is alive or not agagin when sleep 60s
Reviewed-by: Kefu Chai <kchai@redhat.com>
Reviewed-by: Loic Dachary <ldachary@redhat.com>
huangjun [Fri, 29 May 2015 08:11:11 +0000 (16:11 +0800)]
osdc/Journaler.h: fix ceph_file_layout dump error in journaler::dump().
Signed-off-by: huangjun <hjwsm1989@gmail.com>
Xinze Chi [Fri, 29 May 2015 01:33:01 +0000 (09:33 +0800)]
commit: test: check daemon is alive or not agagin when sleep 60s
Signed-off-by: Xinze Chi <xmdxcxz@gmail.com>
Loic Dachary [Thu, 28 May 2015 20:46:06 +0000 (22:46 +0200)]
tests: add lrc tests to osd-scrub-repair.sh
Create an lrc erasure coded pool and run corruption and repair tests on
it.
http://tracker.ceph.com/issues/11665 Fixes: #11665
Signed-off-by: Loic Dachary <ldachary@redhat.com>
Loic Dachary [Thu, 28 May 2015 20:44:17 +0000 (22:44 +0200)]
tests: split osd-scrub-repair.sh erasure code test
The erasure code repair test is split in two function:
* setup conditions specific to jerasure (4 osds, jerasure
profile)
* populate and corrupt and repair the erasure coded pool,
with one or two failures.
Signed-off-by: Loic Dachary <ldachary@redhat.com>
Loic Dachary [Thu, 28 May 2015 20:38:08 +0000 (22:38 +0200)]
tests: cosmetic move of functions in osd-scrub-repair.sh
Signed-off-by: Loic Dachary <ldachary@redhat.com>
Loic Dachary [Thu, 28 May 2015 20:35:08 +0000 (22:35 +0200)]
erasure-code: s/unreocvery/unfound/
Signed-off-by: Loic Dachary <ldachary@redhat.com>
Yehuda Sadeh [Thu, 28 May 2015 18:02:14 +0000 (21:02 +0300)]
Merge pull request #4796 from SUSE/wip-release-notes-fixup
doc: release-notes.rst: fix typo and delete superfluous sentence
Reviewed-by: Yehuda Sadeh <yehuda@redhat.com>
Nathan Cutler [Thu, 28 May 2015 17:29:58 +0000 (19:29 +0200)]
doc: release-notes.rst: fix typo and delete superfluous sentence
Signed-off-by: Nathan Cutler <ncutler@suse.com>
Ken Dreyer [Thu, 28 May 2015 17:09:00 +0000 (11:09 -0600)]
Merge pull request #4786 from dachary/wip-11546-debian-packages
debian/control: ceph-dbg steals ceph-objectstore-tool from ceph-test-dbg
Reviewed-by: Ken Dreyer <kdreyer@redhat.com>
Loic Dachary [Thu, 28 May 2015 08:35:51 +0000 (10:35 +0200)]
debian: ceph-dbg steals ceph-objectstore-tool from ceph-test-dbg
When ceph-objectstore-tool was moved from ceph-test to
ceph by
61cf5da0b51e2d9578c7b4bca85184317e30f4ca , the ceph package in
debian/control was updated accordingly, as recommended by
https://www.debian.org/doc/debian-policy/ch-relationships.html#s-replaces
The same must be done for the ceph-dbg package because
/usr/lib/debug/usr/bin/ceph-objectstore-too is no longer in
ceph-test-dbg.
Although the change was merged may 6th, 2015
8f23382064c189b657564d58c3f9d17720e891ed , teuthology jobs were not
always failing because packages were not systematically upgraded during
the installation. The missing dependencies that were responsible for
this upgrade problem were fixed by
f898ec1e4e3472b0202280f09653a769fc62c8d3 on may 18th, 2015 and all
upgrade tests relying on ceph-*-dbg packages started to fail
systematically after this date.
http://tracker.ceph.com/issues/11546 Fixes: #11546
Signed-off-by: Loic Dachary <ldachary@redhat.com>
Loic Dachary [Thu, 28 May 2015 13:31:22 +0000 (15:31 +0200)]
Merge pull request #4787 from yuyuyu101/fix-perf-i386
PerfLocal: fix i386 compatible with perf_local
Reviewed-by: Loic Dachary <ldachary@redhat.com>
Yehuda Sadeh [Thu, 28 May 2015 11:41:41 +0000 (04:41 -0700)]
Merge pull request #4309 from prallabh/master
RGW: Make RADOS handles in RGW to be a configurable option
Passed rgw teuthology suite run.
Reviewed-by: Yehuda Sadeh <yehuda@redhat.com>
Loic Dachary [Thu, 28 May 2015 10:28:18 +0000 (12:28 +0200)]
Merge pull request #4789 from yehudasa/wip-11442-notes
rgw: update release notes with regard to issue #11442 recovery
Reviewed-by: Loic Dachary <ldachary@redhat.com>
Yehuda Sadeh [Thu, 28 May 2015 10:02:59 +0000 (03:02 -0700)]
rgw: update release notes with regard to issue #11442 recovery
Signed-off-by: Yehuda Sadeh <yehuda@redhat.com>
Haomai Wang [Thu, 28 May 2015 09:25:30 +0000 (17:25 +0800)]
PerfLocal: fix i386 compatible with perf_local
Signed-off-by: Haomai Wang <haomaiwang@gmail.com>
Loic Dachary [Thu, 28 May 2015 09:01:51 +0000 (11:01 +0200)]
Merge pull request #4785 from tchaikov/wip-doc-fixes
doc: typo fixes
Reviewed-by: Loic Dachary <ldachary@redhat.com>
Kefu Chai [Wed, 20 May 2015 06:24:48 +0000 (14:24 +0800)]
osdmap, mon: switch the params of print_tree()
* change from
print_tree(ostream*, Formatter*)
to
print_tree(Formatter*, ostream*)
this is more consistent with other map's print
functions. e.g.
MDSMap::print_summary(Formatter *f, ostream *out)
* and in print_tree(Formatter* f, ostream* os),
- `f` and `os` will be mutual exclusive.
- will assert(0) if both of them are NULL.
Signed-off-by: Kefu Chai <kchai@redhat.com>
Kefu Chai [Wed, 20 May 2015 06:16:14 +0000 (14:16 +0800)]
osdmaptool: dump 'osd tree' in specified format
* so we are able to dump more info from osdmap using this tool,
and this allows us to reproduce the behavior of "ceph osd tree".
* add a test for 'osdmaptool --tree=<format> filepath'
Signed-off-by: Kefu Chai <kchai@redhat.com>
Kefu Chai [Mon, 25 May 2015 15:16:45 +0000 (23:16 +0800)]
doc: fix typo in placement-groups.rst
s/osd pool set/osd pool create/ in the command line example.
Fixes: #11503
Signed-off-by: Kefu Chai <kchai@redhat.com>
Kefu Chai [Thu, 14 May 2015 13:15:24 +0000 (21:15 +0800)]
doc: fix a wrong quote in release.rst
Signed-off-by: Kefu Chai <kchai@redhat.com>
Sage Weil [Wed, 27 May 2015 22:29:05 +0000 (15:29 -0700)]
Merge pull request #4728 from branch-predictor/wip-radosbench-nomemcmp
tools: add --no-verify option to rados bench
Reviewed-by: Sage Weil <sage@redhat.com>
Sage Weil [Wed, 27 May 2015 22:26:13 +0000 (15:26 -0700)]
Merge pull request #4547 from yuyuyu101/wip-perf
Perf: used to perf local hardware capacity
Reviewed-by: Kefu Chai <kchai@redhat.com>
Sage Weil [Wed, 27 May 2015 21:25:28 +0000 (17:25 -0400)]
Merge remote-tracking branch 'gh/next'
Samuel Just [Wed, 27 May 2015 18:14:15 +0000 (11:14 -0700)]
ReplicatedPG::trim_object: write filtered snapset while we're at it
If we trimmed an object, we might as well remove the obsolete snaps
as well.
Signed-off-by: Samuel Just <sjust@redhat.com>
Samuel Just [Wed, 27 May 2015 18:00:54 +0000 (11:00 -0700)]
ReplicatedPG: start_flush: use filtered snapset
Otherwise, we might send our deletes based on deleted snaps. This is
problematic since we may have trimmed the clones to which those snaps
belong, causing us to send them at an earlier snap than we used before.
The specific situation was
78:[78, 70, 63, 5a, 58, 57]:[64(63), 58(58, 57)]
with 58 already clean. To flush 64, we send:
delete@58
delete@59
copyfrom@62
Then, snap 63 is trimmed leaving us with a snapset of:
78:[78, 70, 63, 5a, 58, 57]:[58(58, 57)]
since trim_object doesn't filter the head object snapset snaps. This
isn't really a bug since in general all snapset users must be aware
that there may be trimmed snaps in snapset::snaps. However, here
it becomes a problem when we go to flush head:
delete@58 -- ignored due to snapc
delete@59 -- ignored due to snapc
copyfrom@78 -- not ignored
The base pool head is at snap seq 62, so it clones that value into
clone 78(78, 70) instead of forgetting it. What should have happened
is that we should have based our flushes on filtered snapset:
78:[78, 70, 58, 57]:[58(58, 57)]
Causing us to instead send:
delete@58 -- ignored due to snapc
delete@69 -- not ignored, causes no clone to be made
copyfrom@78 -- not ignored, updates head such that a subsequent clone
will leave 70 out of the clone snaps vector.
Fixes: 11787
Signed-off-by: Samuel Just <sjust@redhat.com>
Sage Weil [Wed, 27 May 2015 15:48:22 +0000 (08:48 -0700)]
Merge pull request #4750 from vuhuong/wip-xio
xio: several bug fixes
Kefu Chai [Wed, 27 May 2015 15:40:50 +0000 (23:40 +0800)]
Merge pull request #4782 from dachary/wip-doc-ceph-helpers
tests: document ceph helpers
Reviewed-by: Kefu Chai <kchai@redhat.com>
John Spray [Wed, 27 May 2015 15:14:14 +0000 (17:14 +0200)]
Merge pull request #4700 from ceph/wip-crush-ruleset-name
Validate default replicated ruleset config value
Reviewed-by: John Spray <john.spray@redhat.com>
Reviewed-by: Loic Dachary <ldachary@redhat.com>
Haomai Wang [Wed, 27 May 2015 14:56:04 +0000 (22:56 +0800)]
Merge pull request #4759 from yuyuyu101/wip-kvstore-misc
Wip kvstore misc
Reviewed-by: Varada Raja Kumar Kari <kariraja@yahoo.com>
Loic Dachary [Wed, 27 May 2015 14:16:34 +0000 (16:16 +0200)]
tests: fix the main() documentation of ceph-helpers.sh
It was incorrectly documented as calling the setup function. It was
also vague on how the environment was reset.
Signed-off-by: Loic Dachary <ldachary@redhat.com>
Loic Dachary [Wed, 27 May 2015 14:14:42 +0000 (16:14 +0200)]
tests: remove unused CEPH_HELPER_VERBOSE in ceph-helpers.sh
And undocumented. It may be useful for debugging but it would have to be
properly implemented instead of being half commented out.
Signed-off-by: Loic Dachary <ldachary@redhat.com>
Ilya Dryomov [Fri, 15 May 2015 18:44:27 +0000 (21:44 +0300)]
doc: fix crush-ruleset-name param description
Specified crush-ruleset-name is required to exist, implicit creation is
going to happen only if crush-ruleset-name wasn't specified on the
command line. While at it, pool-name is very much a required param.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Ilya Dryomov [Sat, 16 May 2015 10:19:22 +0000 (13:19 +0300)]
OSDMonitor: fix prepare_pool_crush_ruleset() retval
CrushWrapper::get_osd_pool_default_crush_replicated_ruleset() returns
-1 on error. Returning -EPERM for "No suitable CRUSH ruleset exists"
is wrong.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Ilya Dryomov [Fri, 15 May 2015 18:44:27 +0000 (21:44 +0300)]
CrushWrapper: validate default replicated ruleset config opt
Validate osd_pool_default_crush_{replicated_ruleset,rule} config
options, in particular when creating pools. Otherwise "ceph osd pool
create foo <pg_num>" may end up creating pools with non-existent
rulesets.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Ilya Dryomov [Thu, 21 May 2015 15:52:52 +0000 (18:52 +0300)]
OSDMap: respect default replicated ruleset config opt in build_simple()
Use id provided by osd_pool_default_crush_{replicated_ruleset,rule}
config options when creating a simple replicated ruleset for an initial
osdmap instead of always making it ruleset 0. Not doing so may leave
default created pools (currently "rbd") in a broken state with their
crush_ruleset pointing to a non-existent ruleset.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Ilya Dryomov [Fri, 22 May 2015 12:50:07 +0000 (15:50 +0300)]
tests: a couple tweaks to osd-pool-create.sh
In TEST_default_deprectated_*(), make expected/unexpected vars local
and actually check that rbd, being a default created pool, is set to
use the ruleset specified by conf.
INVALIDRULESET thing in TEST_replicated_pool() is redundant - it is
checked in TEST_replicated_pool_with_ruleset() a bit earlier.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Loic Dachary [Wed, 27 May 2015 11:21:23 +0000 (13:21 +0200)]
Merge pull request #4777 from SUSE/wip-git_ignore_systemd_autotools_template_systemd_ceph_osd
.gitignore: systemd/ceph-osd@.service
Reviewed-by: Loic Dachary <ldachary@redhat.com>
Haomai Wang [Wed, 27 May 2015 05:25:50 +0000 (13:25 +0800)]
debian/copyright: update copyright for test/perf*
Signed-off-by: Haomai Wang <haomaiwang@gmail.com>
Loic Dachary [Wed, 27 May 2015 09:54:08 +0000 (11:54 +0200)]
Merge pull request #4779 from theanalyst/scripts/ceph-release-notes
scripts: Add a helper to make release notes
Reviewed-by: Loic Dachary <ldachary@redhat.com>
Abhishek Lekshmanan [Wed, 27 May 2015 09:42:58 +0000 (15:12 +0530)]
scripts: Add a helper to make release notes
First cut for a `ceph-release-notes` script added which looks at merge
commits and picks out issue numbers. Though this ideally suits for
backport releases workflow where the commit messages always follow a
specific pattern, it is partly useful for preparing release notes for
normal releases as well.
Signed-off-by: Abhishek Lekshmanan <abhishek.lekshmanan@ril.com>
Owen Synge [Wed, 27 May 2015 08:25:03 +0000 (10:25 +0200)]
.gitignore: systemd/ceph-osd@.service
systemd/ceph-osd@.service is now auto-generated by autotools.
This means the file should be added to gitignored list.
Signed-off-by: Owen Synge <osynge@suse.com>
Haomai Wang [Wed, 27 May 2015 04:51:50 +0000 (12:51 +0800)]
packaging: include ceph_perf_local
Signed-off-by: Haomai Wang <haomaiwang@gmail.com>
Haomai Wang [Wed, 6 May 2015 11:52:35 +0000 (19:52 +0800)]
ceph_perf_local: rename from ceph_perf
Signed-off-by: Haomai Wang <haomaiwang@gmail.com>
Loic Dachary [Tue, 26 May 2015 23:17:30 +0000 (01:17 +0200)]
Merge pull request #4708 from dachary/wip-erasure-code-profile
erasure-code: fix error reporting
Reviewed-by: Takeshi Miyamae <miyamae.takeshi@jp.fujitsu.com>
Sage Weil [Tue, 26 May 2015 22:37:20 +0000 (15:37 -0700)]
Merge pull request #4768 from SUSE/wip-systemd_autotools_template_systemd_ceph_osd
Template systemd/ceph-osd@.service with autotools,
Reviewed-by: Sage Weil <sage@redhat.com>
Samuel Just [Tue, 26 May 2015 19:35:11 +0000 (12:35 -0700)]
osd_types::is_new_interval: size change triggers new interval
Fixes: 11771
Signed-off-by: Samuel Just <sjust@redhat.com>
Loic Dachary [Tue, 26 May 2015 19:07:05 +0000 (21:07 +0200)]
Merge pull request #4761 from dachary/wip-doc-workflow
doc: update the development workflow
Reviewed-by: Nathan Cutler <ncutler@suse.cz>
Reviewed-by: Abhishek Lekshmanan <abhishek.lekshmanan@ril.com>
Reviewed-by: Kefu Chai <kchai@redhat.com>
Loic Dachary [Tue, 26 May 2015 18:50:24 +0000 (20:50 +0200)]
Merge pull request #4772 from theanalyst/doc/release/v0.94.2-updates
doc: updates to v0.94.2 draft release notes
Reviewed-by: Loic Dachary <ldachary@redhat.com>
Josh Durgin [Tue, 26 May 2015 18:43:29 +0000 (11:43 -0700)]
Merge pull request #4318 from ceph/wip-11056
librbd: avoid blocking AIO API methods
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
Jason Dillaman [Fri, 10 Apr 2015 00:34:28 +0000 (20:34 -0400)]
PendingReleaseNotes: document changes to librbd's aio_read methods
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Jason Dillaman [Thu, 9 Apr 2015 01:55:36 +0000 (21:55 -0400)]
tests: update librbd AIO tests to remove result code
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Jason Dillaman [Thu, 9 Apr 2015 17:33:09 +0000 (13:33 -0400)]
librbd: AioRequest::send no longer returns a result
The librados calls used by AioRequest::send should always return
zero unless there is a bug.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Jason Dillaman [Thu, 9 Apr 2015 01:37:50 +0000 (21:37 -0400)]
librbd: internal AIO methods no longer return result
All failures should be returned via the AioCompletion.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Jason Dillaman [Thu, 9 Apr 2015 01:48:21 +0000 (21:48 -0400)]
Throttle: added pending_error method to SimpleThrottle
Allow the client of SimpleThrottle to detect an async error
so that it can exit early.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Jason Dillaman [Thu, 9 Apr 2015 00:18:50 +0000 (20:18 -0400)]
librbd: add new fail method to AioCompletion
Helper method to handle passing fatal errors generated within
librbd (not from the OSDs) back to the client.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Jason Dillaman [Wed, 8 Apr 2015 23:06:52 +0000 (19:06 -0400)]
librbd: avoid blocking AIO API methods
Enqueue all AIO API methods within the new librbd thread pool to
reduce the possibility of any blocking operations. To maintain
backwards compatibility with the legacy return codes of the API's
AIO methods, it's still possible to block attempting to acquire
the snap_lock.
Fixes: #11056
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Jason Dillaman [Wed, 8 Apr 2015 21:24:08 +0000 (17:24 -0400)]
librbd: add task pool / work queue for requests / callbacks
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Jason Dillaman [Mon, 11 May 2015 21:05:49 +0000 (17:05 -0400)]
WorkQueue: added virtual destructor
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Jason Dillaman [Wed, 8 Apr 2015 20:46:34 +0000 (16:46 -0400)]
WorkQueue: add new ContextWQ work queue
The queue holds a collection of Context pointers that will
be completed by the thread pool.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Abhishek Lekshmanan [Tue, 26 May 2015 18:23:50 +0000 (23:53 +0530)]
doc: updates to v0.94.2 draft release notes
Signed-off-by: Abhishek Lekshmanan <abhishek.lekshmanan@ril.com>
Loic Dachary [Tue, 26 May 2015 10:53:46 +0000 (12:53 +0200)]
doc: update the development workflow
* use HOWTO_monitor_the_automated_tests_AKA_nightlies to explain the nightlies
* replace references to Serverity with Backport tracker
* add links to the backporter manual and the release page
* s/0.95/9.0.0/
* unify release names to be lowercase
* replace lifecycle with release cycle and end of life with retirement
* Prefer LTS or Long Term Stable over Long Term Support
Signed-off-by: Loic Dachary <ldachary@redhat.com>
Josh Durgin [Tue, 26 May 2015 17:07:11 +0000 (10:07 -0700)]
Merge pull request #4756 from ceph/wip-mount-timeout-doc
rbd: document mount_timeout in the man page
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
Owen Synge [Tue, 26 May 2015 17:02:36 +0000 (19:02 +0200)]
Template systemd/ceph-osd@.service with autotools,
The libexec path is different for different distributions.
systemd. This path is defined by a new variable on the
configure path.
This variable can be set with enviroment SYSTEMD_LIBEXEC_DIR.
The parameter --with-systemd-libexec-dir overrides the enviroment
variable.
Appropriate conditionals are set for SUSE and RHEL derivatives.
This is then used to template out systemd/ceph-osd@.service
Signed-off-by: Owen Synge <osynge@suse.com>
Loic Dachary [Tue, 26 May 2015 11:14:14 +0000 (13:14 +0200)]
Merge pull request #4746 from ceph/wip-blacklist-json
osd: fix blacklist field in OSDMap::dump
Reviewed-by: Loic Dachary <ldachary@redhat.com>
John Spray [Fri, 22 May 2015 13:08:04 +0000 (14:08 +0100)]
qa/cephtool: add blacklist json output check
...not very elegantly because this is bash, but
at least check the expected value is somewhere
present in the JSON output.
Signed-off-by: John Spray <john.spray@redhat.com>
John Spray [Fri, 22 May 2015 09:48:32 +0000 (10:48 +0100)]
osd: fix blacklist field in OSDMap::dump
This was using an array_section so we were getting
a list of only the times, instead of an array
mapping addr to time.
Signed-off-by: John Spray <john.spray@redhat.com>
Haomai Wang [Tue, 26 May 2015 04:40:19 +0000 (12:40 +0800)]
KeyValueStore: Add collect_metadata support
Signed-off-by: Haomai Wang <haomaiwang@gmail.com>
Haomai Wang [Tue, 26 May 2015 04:34:08 +0000 (12:34 +0800)]
KeyValueStore: Avoid extra lookup for map
Signed-off-by: Haomai Wang <haomaiwang@gmail.com>
Haomai Wang [Tue, 26 May 2015 03:57:10 +0000 (11:57 +0800)]
Merge pull request #4757 from xinxinsh/wip-kv-cleanup
os : remove GenericObjectMap::sync() function
Reviewed-by: Haomai Wang <haomaiwang@gmail.com>
Yan, Zheng [Tue, 26 May 2015 01:18:05 +0000 (09:18 +0800)]
Merge pull request #4755 from ceph/wip-11752
mds: fix use-after-free in SessionMap::remove_session