Zac Dover [Fri, 12 May 2023 10:35:25 +0000 (20:35 +1000)]
doc/cephfs: rectify prompts in fs-volumes.rst
Make sure all prompts are unselectable. This PR is meant to be
backported to Reef, Quincy, and Pacific, to get all of the prompts into
a fit state so that a line-edit can be performed on the Englsh language
in this file.
Zac Dover [Fri, 5 May 2023 06:35:28 +0000 (16:35 +1000)]
doc/cephfs: repairing inaccessible FSes
Add a procedure to doc/cephfs/troubleshooting.rst that explains how to
restore access to FileSystems that became inaccessible after
post-Nautilus upgrades. The procedure included here was written by Harry
G Coin, and merely lightly edited by me. I include him here as a
"co-author", but it should be noted that he did the heavy lifting on
this.
See the email thread here for more context:
https://lists.ceph.io/hyperkitty/list/ceph-users@ceph.io/message/HS5FD3QFR77NAKJ43M2T5ZC25UYXFLNW/
Co-authored-by: Harry G Coin <hgcoin@gmail.com> Signed-off-by: Zac Dover <zac.dover@proton.me>
Laura Flores [Mon, 1 May 2023 16:28:54 +0000 (16:28 +0000)]
mgr: add urllib3==1.26.15 to mgr/requirements.txt
We do not depend on any particular version of
urllib3, but as a workaround to the incompatibility
of urllib3 constraints between kubernetes and
requests, we need to pin it temporarily to
the version both are happy with.
Fixes: https://tracker.ceph.com/issues/59591 Signed-off-by: Laura Flores <lflores@redhat.com>
(cherry picked from commit 80d460005e44649191aa862fa78bd278644b5237)
qa/: Override mClock profile to 'high_recovery_ops' for qa tests
The qa tests are not client I/O centric and mostly focus on triggering
recovery/backfills and monitor them for completion within a finite amount
of time. The same holds true for scrub operations.
Therefore, an mClock profile that optimizes background operations is a
better fit for qa related tests. The osd_mclock_profile is therefore
globally overriden to 'high_recovery_ops' profile for the Rados suite as
it fits the requirement.
Also, many standalone tests expect recovery and scrub operations to
complete within a finite time. To ensure this, the osd_mclock_profile
options is set to 'high_recovery_ops' as part of the run_osd() function
in ceph-helpers.sh.
A subset of standalone tests explicitly used 'high_recovery_ops' profile.
Since the profile is now set as part of run_osd(), the earlier overrides
are redundant and therefore removed from the tests.
doc/: Modify mClock configuration documentation to reflect profile changes
Modify the relevant documentation to reflect:
- change in the default mClock profile to 'balanced'
- new allocations for ops across mClock profiles
- change in the osd_max_backfills limit
- miscellaneous changes related to warnings.
common/options/osd.yaml.in: Change mclock max sequential bandwidth for SSDs
The osd_mclock_max_sequential_bandwidth_ssd is changed to 1200 MiB/s as
a reasonable middle ground considering the broad range of SSD capabilities.
This allows the mClock's cost model to extract the SSDs capability
depending on the cost of the IO being performed.
osd/: Retain the default osd_max_backfills limit to 1 for mClock
The earlier limit of 3 was still aggressive enough to have an impact on
the client and other competing operations. Retain the current default
for mClock. This can be modified if necessary after setting the
osd_mclock_override_recovery_settings option.
Edit the "stretch mode" section in doc/rados/operations/stretch-mode.rst
so that the procedure is formatted as a procedure and the sentences
correctly have heads.
Co-authored-by: Anthony D'Atri <anthony.datri@gmail.com> Signed-off-by: Zac Dover <zac.dover@proton.me>
(cherry picked from commit a19ff7a5ea9bbd24365648a90abfa1b720c5b231)
Mistakenly removed in commit d79f2a81541c ("docs: warning and remove
few docs section for Filestore Update docs after filestore removal.").
The kernel client, however new, will continue to be able to talk to
FileStore OSDs for as long as they exist.
Samuel Just [Tue, 11 Apr 2023 15:10:04 +0000 (08:10 -0700)]
osd/scheduler/mClockScheduler: avoid limits for recovery
Now that recovery operations are split between background_recovery and
background_best_effort, rebalance qos params to avoid penalizing
background_recovery while idle.
Samuel Just [Thu, 6 Apr 2023 05:57:42 +0000 (22:57 -0700)]
osd/: differentiate scheduler class for undersized/degraded vs data movement
Recovery operations on pgs/objects that have fewer than the configured
number of copies should be treated more urgently than operations on
pgs/objects that simply need to be moved to a new location.
Samuel Just [Tue, 4 Apr 2023 23:34:17 +0000 (23:34 +0000)]
osd/scheduler: simplify qos specific params in OpSchedulerItem
is_qos_item() was only used in operator<< for OpSchedulerItem. However,
it's actually useful to see priority for mclock items since it affects
whether it goes into the immediate queues and, for some types, the
class. Unconditionally display both class_id and priority.
osd: Retain overridden mClock recovery settings across osd restarts
Fix an issue where an overridden mClock recovery setting (set prior to
an osd restart) could be lost after an osd restart.
For e.g., consider that prior to an osd restart, the option
'osd_max_backfill' was successfully set to a value different from the
mClock default. If the osd was restarted for some reason, the
boot-up sequence was incorrectly resetting the backfill value to the
mclock default within the async local/remote reservers. This fix
ensures that no change is made if the current overriden value is
different from the mClock default.
Modify an existing standalone test to verify that the local and remote
async reservers are updated to the desired number of backfills under
normal conditions and also across osd restarts.
osd: Set default max active recovery and backfill limits for mClock
Client ops are sensitive to the recovery load and must be carefully
set for osds whose underlying device is HDD. Tests revealed that
recoveries with osd_max_backfills = 10 and osd_recovery_max_active_hdd = 5
were still aggressive and overwhelmed client ops. The built-in defaults
for mClock are now set to:
Previously, setting default configs from the configured profile was
split across:
- enable_mclock_profile_settings
- set_mclock_profile - sets mclock_profile class member
- set_*_allocations - updates client_allocs class member
- set_profile_config - sets profile based on client_allocs class member
This made tracing the effect of changing the profile pretty challenging
due passing state through class member variables.
Instead, define a simple profile_t with three constexpr values
corresponding to the three profiles and handle it all in a single
set_config_defaults_from_profile() method.
osd: Modify mClock scheduler's cost model to represent cost in bytes
The mClock scheduler's cost model for HDDs/SSDs is modified and now
represents the cost of an IO in terms of bytes.
The cost parameters, namely, osd_mclock_cost_per_io_usec_[hdd|ssd]
and osd_mclock_cost_per_byte_usec_[hdd|ssd] which represent the cost
of an IO in secs are inaccurate and therefore removed.
The new model considers the following aspects of an osd to calculate
the cost of an IO:
- osd_mclock_max_capacity_iops_[hdd|ssd] (existing option)
The measured random write IOPS at 4 KiB block size. This is
measured during OSD boot-up using OSD bench tool.
- osd_mclock_max_sequential_bandwidth_[hdd|ssd] (new config option)
The maximum sequential bandwidth of of the underlying device.
For HDDs, 150 MiB/s is considered, and for SSDs 750 MiB/s is
considered in the cost calculation.
The following important changes are made to arrive at the overall
cost of an IO,
1. Represent QoS reservation and limit config parameter as proportion:
The reservation and limit parameters are now set in terms of a
proportion of the OSD's max IOPS capacity. The earlier representation
was in terms of IOPS per OSD shard which required the user to perform
calculations before setting the parameter. Representing the
reservation and limit in terms of proportions is much more intuitive
and simpler for a user.
2. Cost per IO Calculation:
Using the above config options, osd_bandwidth_cost_per_io for the osd is
calculated and set. It is the ratio of the max sequential bandwidth and
the max random write iops of the osd. It is a constant and represents the
base cost of an IO in terms of bytes. This is added to the actual size of
the IO(in bytes) to represent the overall cost of the IO operation.See
mClockScheduler::calc_scaled_cost().
3. Cost calculation in Bytes:
The settings for reservation and limit in terms a fraction of the OSD's
maximum IOPS capacity is converted to Bytes/sec before updating the
mClock server's ClientInfo structure. This is done for each OSD op shard
using osd_bandwidth_capacity_per_shard shown below:
The above result is updated within the mClock server's ClientInfo
structure for different op_scheduler_class operations. See
mClockScheduler::ClientRegistry::update_from_config().
The overall cost of an IO operation (in secs) is finally determined
during the tag calculations performed in the mClock server. See
crimson::dmclock::RequestTag::tag_calc() for more details.
4. Profile Allocations:
Optimize mClock profile allocations due to the change in the cost model
and lower recovery cost.
5. Modify standalone tests to reflect the change in the QoS config
parameter representation of reservation and limit options.
Fixes: https://tracker.ceph.com/issues/58529 Fixes: https://tracker.ceph.com/issues/59080 Signed-off-by: Samuel Just <sjust@redhat.com> Signed-off-by: Sridhar Seshasayee <sseshasa@redhat.com>
osd: update PGRecovery queue item cost to reflect object size
Previously, we used a static value of osd_recovery_cost (20M
by default) for PGRecovery. For pools with relatively small
objects, this causes mclock to backfill very very slowly as
20M massively overestimates the amount of IO each recovery
queue operation requires. Instead, add a cost_per_object
parameter to OSDService::awaiting_throttle and set it to the
average object size in the PG being queued.
Fixes: https://tracker.ceph.com/issues/58606 Signed-off-by: Samuel Just <sjust@redhat.com> Signed-off-by: Sridhar Seshasayee <sseshasa@redhat.com>
osd: update OSDService::queue_recovery_context to specify cost
Previously, we always queued this with cost osd_recovery_cost which
defaults to 20M. With mclock, this caused these items to be delayed
heavily. Instead, base the cost on the operation queued.
Fixes: https://tracker.ceph.com/issues/58606 Signed-off-by: Samuel Just <sjust@redhat.com> Signed-off-by: Sridhar Seshasayee <sseshasa@redhat.com>
osd/osd_types: use appropriate cost value for PullOp
See included comments -- previous values did not account for object
size. This causes problems for mclock which is much more strict
in how it interprets costs.
Fixes: https://tracker.ceph.com/issues/58607 Signed-off-by: Samuel Just <sjust@redhat.com> Signed-off-by: Sridhar Seshasayee <sseshasa@redhat.com>
osd/osd_types: use appropriate cost value for PushReplyOp
See included comments -- previous values did not account for object
size. This causes problems for mclock which is much more strict
in how it interprets costs.
Fixes: https://tracker.ceph.com/issues/58529 Signed-off-by: Samuel Just <sjust@redhat.com> Signed-off-by: Sridhar Seshasayee <sseshasa@redhat.com>
projects / ceph.git / log