Casey Bodley [Thu, 7 Dec 2023 14:11:12 +0000 (09:11 -0500)]
vstart: add --rgw_store option for rados|dbstore|posix
enables dbstore for rgw_backend_store and rgw_config_store, allowing
vstart to run without any mons or osds. database files are put under
the dev subdirectory
when rgw_store=posix, the posix filter is added on top of dbstore
Mark Kogan [Tue, 28 Nov 2023 12:34:31 +0000 (14:34 +0200)]
rgw: d3n: fix valgrind reported leak related to libaio worker threads
which sporadically reproduces on teuthology ubuntu instances
happens because a race between RGW shutdown occurring before
the libaio worker threads had terminated
to fix, reduced the libaio threads inactivity shutdown time
ref:
man aio_init
...
aio_idle_time
This field specifies the amount of time in seconds that a worker thread
should wait for further requests before terminating, after having
completed a previous request. The
default value is 1.
...
Fixes: https://tracker.ceph.com/issues/63445 Signed-off-by: Mark Kogan <mkogan@ibm.com>
Zac Dover [Sat, 2 Dec 2023 05:32:26 +0000 (06:32 +0100)]
doc/radosgw: add gateway starting command
Add a command that properly starts (or restarts) the RADOS gateway after
RGW settings have been changed. This commit has been added in response
to an issue reported anonymously on
https://pad.ceph.com/p/Report_Documentation_Bugs.
Co-authored-by: Anthony D'Atri <anthony.datri@gmail.com> Signed-off-by: Zac Dover <zac.dover@proton.me>
Joshua Baergen [Thu, 9 Nov 2023 16:43:22 +0000 (09:43 -0700)]
librbd: Append one journal event per image request
In the case where an image request is split across multiple object
extents and journaling is enabled, multiple journal events are appended.
Prior to this change, all object requests would wait for the last
journal event to complete, since journal events complete in order and
thus the last one completing implies that all prior journal events were
safe at that point.
The issue with this is that there's nothing stopping that last journal
event from being cleaned up before all object requests have stopped
referring to it. Thus, it's entirely possible for the following sequence
to occur:
1. An image request gets split into two image extents and two object
requests. Journal events are appended (one per image extent).
2. The first object request gets delayed due to an overlap, but the
second object request gets submitted and starts waiting on the last
journal event (which also causes a C_CommitIOEvent to be instantiated
against that journal event).
3. Journaling completes, and the C_CommitIOEvent fires. The
C_CommitIOEvent covers the entire range of data that was journaled in
this event, and so the event is cleaned up.
4. The first object request from above is allowed to make progress; it
tries to wait for the journal event that was just cleaned up which
causes the assert in wait_event() to fire.
As far as I can tell, this is only possible on the discard path today,
and only recently. Up until 21a26a752843295ff946d1543c2f5f9fac764593
(librbd: Fix local rbd mirror journals growing forever), m_image_extents
always contained a single extent for all I/O types; this commit changed
the discard path so that if discard granularity changed the discard
request, m_image_extents would be repopulated, and if the request
happened to cross objects then there would be multiple m_image_extents.
It appears that the intent here was that there should be one journal
event per image request and the pending_extents kept track of what had
completed thus far. This commit restores that 1:1 relationship.
Casey Bodley [Tue, 5 Dec 2023 21:12:56 +0000 (16:12 -0500)]
osd/scrubber: fix signed comparison warning
[681/1140] Building CXX object src/osd/CMakeFiles/osd.dir/scrubber/scrub_resources.cc.o
src/osd/scrubber/scrub_resources.cc: In member function ‘bool Scrub::ScrubResources::inc_scrubs_remote(pg_t)’:
src/osd/scrubber/scrub_resources.cc:84:18: warning: comparison of integer expressions of different signedness: ‘long unsigned int’ and ‘const int64_t’ {aka ‘const long int’} [-Wsign-compare]
84 | if (pre_op_cnt < conf->osd_max_scrubs) {
| ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
Zac Dover [Tue, 5 Dec 2023 19:46:26 +0000 (20:46 +0100)]
doc/radosgw: update link in rgw-cache.rst
Update link in doc/radosgw/rgw-cache.rst. The link updated here is a
link to all the Nginx configuration files. The old link was broken. This
update comes to us from an anonymous report on
https://pad.ceph.com/p/Report_Documentation_Bugs.
Casey Bodley [Tue, 5 Dec 2023 17:21:18 +0000 (12:21 -0500)]
common: use inline for monostate dencoders
fix a 'multiple definition' error when included by multiple sources:
src/common/versioned_variant.h:31: multiple definition of `ceph::encode(std::monostate const&, ceph::buffer::v15_2_0::list&)';
rgw_main.cc.o:src/common/versioned_variant.h:31: first defined here
Ilya Dryomov [Fri, 1 Dec 2023 17:29:12 +0000 (18:29 +0100)]
test/librbd: drop DiffIterateTest.DiffIterateRegression6926
This was added to test [1]. It's duplicated by several cases in
DiffIterateTest.DiffIterateDeterministicPP now. Specifically, the
issue could be reproduced by any of:
(8) beginning of time -> snap2
(9) snap1 -> snap2
(10) beginning of time -> snap1
Ilya Dryomov [Fri, 1 Dec 2023 17:54:19 +0000 (18:54 +0100)]
test/librbd: drop TestLibRBD.SnapDiff
This was added to integration test [1], separate from the fix which
went in only with unit test adjustments. It's duplicated by several
cases in DiffIterateTest.DiffIterateDeterministic now. Specifically,
the issue could be reproduced by any of:
(3) snap2 -> HEAD
(4) snap3 -> HEAD
(7) snap2 -> snap3
scribble()-based DiffIterate tests are too weak: at least two
regressions that should been caught by DiffIterate.DiffIterate or
DiffIterate.DiffIterateStress were missed [1][2]. Aside from the
randomness which can be both a good and a bad thing, asserts there
ensure only that the returned diff covers all changes that were made.
If the returned diff is too excessive or otherwise bogus, this isn't
detected [3].
Add a deterministic test to systematically cover the most common cases
that don't involve discards. A similar test for discards will be added
with the fix for [4].
Comment out debug log in vector_iterate_cb() like it's done in
iterate_cb().
John Mulligan [Mon, 4 Dec 2023 18:20:02 +0000 (13:20 -0500)]
cephadm: simplify loading jinja2 templates from zipapp
The saga of failures in teuthology brought on by the combination of
zipapp and jinja2 template loading continues in this episode. Remove
some of the path handling that was taken from the original jinja2
implementation and try to replace it with something inherently simpler
such that we always construct paths relative to the zip archive and pass
that to the zipimporter. The hope here is that by doing fewer
manipulations of the "path" we are more likely to match the items
tracked inside the zipimporter class.
We do not worry about some of the concerns that regular jinja2 has as we
never expect cephadm to be run on something other than linux and we have
control over what sources we expect to load templates from. We do take
one precaution and that is to reject any paths that contain "." and ".."
as components. Less to avoid malicious attempts to read files it should
not (but that would be nice) and more to nudge toward simple template
references recorded in our Templates enum.
Signed-off-by: John Mulligan <jmulligan@redhat.com>
Vallari Agrawal [Thu, 26 Oct 2023 07:55:44 +0000 (13:25 +0530)]
qa: add rbd/nvmeof test
A basic test for ceph-nvmeof[1] where
nvmeof initiator is created.
It requires use of a new task "nvmeof_gateway_cfg"
under cephadm which shares config information
between two remote hosts.
Zac Dover [Sun, 3 Dec 2023 12:17:46 +0000 (13:17 +0100)]
doc/rados: repair stretch-mode.rst
Remove a section of doc/rados/operations/stretch-mode.rst that I wrongly
re-included after its removal. The request for this (re)-removal is
here: https://github.com/ceph/ceph/pull/54689#discussion_r1413007655.
Ilya Dryomov [Mon, 27 Nov 2023 10:59:26 +0000 (11:59 +0100)]
librbd: fix read_whole_object handling in ObjectListSnapsRequest
Originally, in commit 2be4840afd4f ("librados/snap_set_diff: don't
assert on empty snapset"), exists was set to true. This didn't make
ObjectListSnapsRequest, causing the following deep-copy tests to fail
when run against calc_snap_set_diff() rigged to return "whole object"
as described in [1]:
This is a regression introduced in commit cc87a8bd697e ("librbd:
deep-copy object utilizes image-extent IO methods") by way of commit 11923e234efc ("librbd: generic object list snapshot request").
Ilya Dryomov [Mon, 27 Nov 2023 09:11:52 +0000 (10:11 +0100)]
librbd: fix LIST_SNAPS_FLAG_WHOLE_OBJECT behavior
Bundling read_whole_object and LIST_SNAPS_FLAG_WHOLE_OBJECT cases
together is wrong:
- In read_whole_object case, calc_snap_set_diff() sets just
read_whole_object. Everything else is zeroed out and may require
resetting to fit with the rest of ObjectListSnapsRequest logic.
- In LIST_SNAPS_FLAG_WHOLE_OBJECT case, only the diff should be
expanded. Everything else is set by calc_snap_set_diff() and should
be used as is. This goes for end_size in particular -- if it's reset
to object size, bogus zero extents may be returned as the object
would appear to have grown.
This is a regression introduced in commit 4429ed4f3f4c ("librbd: switch
diff iterate API to use new snaps list dispatch methods") by way of
commit 66dd53d9c4d9 ("librbd: optionally return full object extent for
any snapshot deltas").
Ilya Dryomov [Sun, 19 Nov 2023 21:44:28 +0000 (22:44 +0100)]
test/librbd: make ListSnapsWholeObject actually test stuff
Despite being added in commit 66dd53d9c4d9 ("librbd: optionally return
full object extent for any snapshot deltas") ostensibly to test the new
LIST_SNAPS_FLAG_WHOLE_OBJECT code, it surely doesn't do that because
the flag isn't even passed to MockObjectListSnapsRequest::create().
I can only guess, but it looks like snap ID 3 was intended to be
a starting point. Otherwise, with 0 and CEPH_NOSNAP passed as snap
IDs, the overlap that is set up for the clone wouldn't affect the
computation in any way.
Use snap ID 3 as a starting point and run both with and without
LIST_SNAPS_FLAG_WHOLE_OBJECT on the same snapset to pinpoint the
difference.
Ilya Dryomov [Sat, 11 Nov 2023 13:15:49 +0000 (14:15 +0100)]
librados/snap_set_diff: set end_size only if end object exists
Since commit 73f50a13109f ("rbd-mirror: use generalized deep copy for
image sync"), the only user of calc_snap_set_diff() immediately unsets
end_size otherwise.
calc_snap_set_diff() semantics are clearer if end_size is set together
with end_exists and clone_end_snap_id.
Zac Dover [Sat, 2 Dec 2023 05:38:28 +0000 (06:38 +0100)]
doc/radosgw: fix formatting
Repair the formatting of a string that had a string inside backticks
that itself was inside double asterisks. The presence of the asterisks
around the entire string caused the backticks to appear in the rendered
documentation.
Casey Bodley [Fri, 1 Dec 2023 19:27:51 +0000 (14:27 -0500)]
rgw/zone: remove check for (very) old pools config
i'm not sure how this was meant to work originally, but now it's
obviously broken - it tries to stat an object from the domain_root pool
before the domain_root pool name gets filled in
https://github.com/ceph/ceph/pull/50359 added a new error message that
makes this clear:
Ronen Friedman [Fri, 1 Dec 2023 14:48:49 +0000 (08:48 -0600)]
tests/scrub: deactivate osd-scrub-dump stand-alone test
as the scrub reservation changes had made it obsolete.
Note - it is not an issue of fixing the test, but rather
that the tested functionality is no longer there.
Casey Bodley [Tue, 14 Nov 2023 01:05:47 +0000 (20:05 -0500)]
common: add versioned encodings for std::variant
adds two encoding strategies for `std::variant<>` under the namespaces
`ceph::versioned_variant` and `ceph::converted_variant`
these versioned encodings allow the variant to be extended with new
types, provided that they're always added to the end without changing
or removing existing types. because of this requirement, no default
encoding is provided for `std::variant`. callers must opt in to one
namespace or the other
the `converted_variant` encoding requires the variant's first type T
to use versioned encoding, and guarantees that the variant's encoding
is backward-compatible with T's
Nizamudeen A [Wed, 18 Oct 2023 17:46:09 +0000 (23:16 +0530)]
mgr/dashboard: cephfs subvolume list snapshots
Added a tab for displaying the subvolume snapshots
- this tab will show an info alert when there are no subvolumes present
- if the subvolume is present, then it'll be auto-selected by default
Implemented a filter to search the groups and subvolumes by its name.
Also added a scrollbar when there are too many items in the nav list
Modified the REST APIs to fetch only the names of the resources and
fetch the info when an API call is requesting for it.
Added unit tests
Fixes: https://tracker.ceph.com/issues/63237 Signed-off-by: Nizamudeen A <nia@redhat.com>
John Mulligan [Thu, 9 Nov 2023 19:26:35 +0000 (14:26 -0500)]
cephadm: convert all deploy tests to use funkypatch fixture
During the refactor of various daemon type classes some of the tests had
been converted to funkypatch in order to deal with imports occuring over
multiple files. However, this conversion was done piece by piece in
order to make clear what was changing. This left the functions in this
file inconsistent. Change all the remaining function to use funkypatch
for consistency.
Signed-off-by: John Mulligan <jmulligan@redhat.com>
John Mulligan [Thu, 9 Nov 2023 18:46:04 +0000 (13:46 -0500)]
cephamd: update tests to use should_log_to_journald from context_getters
Update tests to import should_log_to_journald from context_getters - the
module that actually defines that function. This makes later refactoring
easier.
Signed-off-by: John Mulligan <jmulligan@redhat.com>
projects / ceph.git / log