N Balachandran [Thu, 22 Aug 2024 08:15:36 +0000 (13:45 +0530)]
rbd-mirror: use correct ioctx for namespace
The PoolReplayer uses the ioctx for the default namespace
to check if other namespaces are enabled for mirroring, causing
it to incorrectly conclude that they are all enabled.
Fixes: https://tracker.ceph.com/issues/67676 Signed-off-by: N Balachandran <nibalach@redhat.com>
NitzanMordhai [Tue, 28 Nov 2023 09:52:05 +0000 (09:52 +0000)]
mgr/rest: Trim request array and limit size
Presently, the requests array in the REST module has the potential to grow
indefinitely, leading to excessive memory consumption, particularly when
dealing with lengthy and intricate request results.
To address this issue, a limit will be imposed on the requests array within
the REST module.
This limitation will be governed by the `mgr/restful/x/max_requests` configuration
parameter specific to the REST module.
when submit_request called we will check request array if exceed max_request option
if it does we will check if the future trimmed request finished and log error
message in case we are trimming un-finished requests.
Tobias Urdin [Thu, 15 Aug 2024 15:17:14 +0000 (17:17 +0200)]
qa: barbican: restrict python packages with upper-constraints
We install barbican by doing a pip install directly on the
cloned git repository but we don't honor the upper-constraints
from the OpenStack Requirements project that handles what
versions is supported.
This changes the pip install command that we issue when
installing barbican to honor the requirements for the
version (derived from the branch) that we use, in
this case it's the 2023.1 release upper-constraints [1].
This prevents us from pulling in untested Python packages.
This only updates Barbican because for the Keystone job
we dont directly issue pip but install using tox using the
`venv` environment which already by default sets the
constraints as you can see in [2].
Yuval Lifshitz [Mon, 19 Aug 2024 10:37:07 +0000 (13:37 +0300)]
Merge pull request #59239 from yuvalif/wip-yuval-67513
Reviewed-By: Casey Bodley <cbodley@ibm.com>
test/rgw/notification: use real ip address instead of localhost
based on that comment:
https://tracker.ceph.com/issues/67206#note-6
the address used by the endpoint is taken as the real IP address of the
host where the test script is running and not localhost.
we also changed the rabbitmq-server conf to allow "guest"
user to connect over non localhost address
The commit starts to submit OOL writes before submitting the journal
write, true, but it cannot guarantee that OOL writes finish before the
journal write.
Thus it is possible that during SeaStore restart, a journal record
appears valid but its dependent OOL records are partial written, which
leads to corruption.
Zac Dover [Sat, 17 Aug 2024 03:44:30 +0000 (13:44 +1000)]
doc/cephfs: s/mountpoint/mount point/
Change the string "mountpoint" to "mount point" in English-language
strings (as opposed to in commands, where the string "mountpoint"
sometimes appears and is correct).
cf. https://github.com/ceph/ceph/pull/58908#discussion_r1697715486 in
which page 345 of The IBM Style Guide is referenced to back up this
change.
This commit alters only English-language text and example commands in
which the string "{mount point}" is meant to be replaced. No commands
meant for cutting-and-pasting have been altered in this commit.
Zac Dover [Sat, 17 Aug 2024 03:37:58 +0000 (13:37 +1000)]
doc/cephfs: s/mountpoint/mount point/
Change the string "mountpoint" to "mount point" in English-language
strings (as opposed to in commands, where the string "mountpoint"
sometimes appears and is correct).
cf. https://github.com/ceph/ceph/pull/58908#discussion_r1697715486
in which page 345 of The IBM Style Guide is referenced to back up this
change.
Yuval Lifshitz [Thu, 15 Aug 2024 14:34:57 +0000 (14:34 +0000)]
test/rgw/notification: use real ip address instead of localhost
based on that comment:
https://tracker.ceph.com/issues/67206#note-6
the address used by the endpoint is taken as the real IP address of the
host where the test script is running and not localhost.
we also changed the rabbitmq-server conf to allow "guest"
user to connect over non localhost address
Xiubo Li [Mon, 29 Jul 2024 06:20:41 +0000 (14:20 +0800)]
client: flush the caps release in filesystem sync
We have hit a race between cap releases and cap revoke request
that will cause the check_caps() to miss sending a cap revoke ack
to MDS. And the client will depend on the cap release to release
that revoking caps, which could be delayed for some unknown reasons.
In Kclient we have figured out the RCA about race and we need
a way to explictly trigger this manually could help to get rid
of the caps revoke stuck issue.
Fixes: https://tracker.ceph.com/issues/67221 Signed-off-by: Xiubo Li <xiubli@redhat.com>
adding new oauth2-proxy service. The enable_auth flag enables SSO
authentication via the oauth2-proxy service. The user must ensure the
oauth2-proxy service is deployed before enabling this flag in the
mgmt-gateway service.
FQDN related changes: previously, we were obtaining the FQDN using a
call to the Python socket library run inside the container. While this
generally works, the FQDN returned inside a container can sometimes
differ from the one obtained outside the container. This discrepancy
could cause some issues. To ensure consistency, we now use the FQDN
from the inventory, which provides the correct value as recognized on the host.
Ramana Raja [Sun, 11 Aug 2024 02:18:07 +0000 (22:18 -0400)]
rbd: fix CLI output of `rbd group snap info` command
... when a group snapshot has no member images.
A group snapshot can be created with no member images. For such a group
snapshot, omit the 'image snap' and 'images' fields from the
unformatted CLI output of `rbd group snap info` command so as to not
confuse the user. In the librbd C/C++ data structures representing a
group snapshot with no member images, set the 'image_snap_name' data
member to an empty string.
Fixes: https://tracker.ceph.com/issues/67436 Signed-off-by: Ramana Raja <rraja@redhat.com>
Ivo Almeida [Wed, 26 Jun 2024 14:42:12 +0000 (15:42 +0100)]
mgr/dashboard: replace ngx-datatable by carbon
Fixes: https://tracker.ceph.com/issues/66965
* replaced ngx-datatable by carbon datatable
* created carbon themes for content and tables
* redesigned table actions to render as kebab menu options per data row
* keep only primary actions on datatable toolbar
* implemented carbon batch actions
Adam King [Wed, 31 Jul 2024 17:30:02 +0000 (13:30 -0400)]
mgr/cephadm: make nvme-gw adds be able to handle multiple services/groups
Before this was grabbing the service spec for the first daemon
description in the list. This meant every daemon would be added
with the pool/group of whatever that spec happened to specify.
This patch grabs the spec, and therefore also the pool/group
individually for each nvmeof daemon
Adam King [Thu, 25 Jul 2024 17:36:07 +0000 (13:36 -0400)]
mgr/cephadm: migrate nvmeof specs without group field
As we have added the group field as a requirement for new
nvmeof specs and check for it in spec validation, we need
a migration to populate this field for specs we find that
don't have it.
Zac Dover [Mon, 12 Aug 2024 12:47:08 +0000 (22:47 +1000)]
doc/cephfs: improve cache-configuration.rst
Improve the text in the section about dealing with cache-pressure alerts
that was added in https://github.com/ceph/ceph/pull/59077. The changes
in this commit were suggested by Anthony D'Atri.
Co-authored-by: Patrick Donnelly <pdonnelly@redhat.com> Co-authored-by: Anthony D'Atri <anthony.datri@gmail.com> Signed-off-by: Zac Dover <zac.dover@proton.me>
Casey Bodley [Fri, 9 Aug 2024 16:49:05 +0000 (12:49 -0400)]
rgw: revert account-related changes to get_iam_policy_from_attr()
while bucket ARNs in iam policies don't include account names, policy
evaluation does need to differentiate between buckets in different
tenant namespaces
when requests pass bucket/object ARNs into
verify_bucket/object_permission(), those do include the bucket's tenant
name. to match against those ARNs, we also need to pass the requested
bucket's tenant name into get_iam_policy_from_attr()
projects / ceph.git / log